8BITDO TECHNOLOGY SN30 8Bitdo SN30 2.4G Wireless GamePad for SNES/SFC Classic Edition User Manual
8BITDO TECHNOLOGY HK LIMITED 8Bitdo SN30 2.4G Wireless GamePad for SNES/SFC Classic Edition Users Manual
User Manual
SN30 2.4G and SF30 2.4G
Instruction Manual
（Image）
Connection
NES/SNES/SFC Classic Edition (wireless connection)
1. Plug the 2.4G Retro Receiver into your NES / SFC / SNES Classic Edition.
2. Press START on your controller to connect to the Retro Receiver.
3. LED will
b
e solid
b
lue when connection is successful.
Home Menu Access for NES/SNES/SFC Classic Edition
SELECT + DOWN = RESET
If connection is lost o
r
youwishto
p
air with a new retro receiver,
p
ress an
d
hol
d
SELECT on the controller fo
r
3 seconds.
Blue LED will rapidly blink and be solid blue when connection is successful.
Windows/macOS/Android (wired connection)
1. Connect the controller to your Windows/macOS/Android via the USB cable.
2. LED will be solid blue when connection is successful.
X-Input: press and hold START+X for 3 seconds, blue LED blinks twice to indicate mode activation.
D-Input: press and hold START+B for 3 seconds, blue LED blinks twice to indicate mode activation.
macOS: press and hold START+A for 3 seconds, blue LED blinks twice to indicate mode activation.
Default mode: D-inpu
t
Battery
Status LED Indicator
Low battery Power LED in red
Battery charging Power LED in green
Battery fully charged Power LED turns off
·Built-in 180 mAh Li-on with 25 Hours of play time.
·Rechargeable via USB cable with 60 minutes charging time.
Power Saving
·Sleep mode - 15 minutes with no use.
Support
Please visit support.8bitdo.com for further information and additional support.
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device
can be used in portable exposure condition without restriction.