A Four Tech Co G61024G 2.4G RF Mouse User Manual 2 4G RF Mouse Manual

Download:
Mirror Download [FCC.gov]
Document ID	886737
Application ID	Y/TSpDrv5BEJo0CtNiT3Ug==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	20.62kB (257742 bits)
Date Submitted	2008-01-08 00:00:00
Date Available	2008-01-08 00:00:00
Creation Date	2007-12-26 10:05:01
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2007-12-26 10:05:01
Document Title	Microsoft Word - 2.4G RF Mouse Manual.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Administrator

2.4G RF Mouse
User Guide
Model: G6-10
www.a4tech.com
Knowing the mouse
2.4GHz wireless technology with 16 channels and 1,048,576 ID Codes Errorless 2-Way Communication Technology
The 2.4GHz RF wireless technology is fine-tuned with 16 selected channels Errorless 2-way communication technology features error
and exclusive 1,048,576 ID-codes; it offers precise and smooth wireless
correction capability that speeds up data transmission and
operation in active wireless environments. It allows many wireless devices increases wireless precision. It saves valuable battery power
to operate simultaneously in one area without interfering in the range up to and cost.
8-10 meters.
Anti-interference with Auto Channel Hopping Technology
Ultra Low Battery Power Consumption - Only 8mA!
"Auto Channel Hopping" technology automatically detects and secures
2.4G6 is designed with “4 Level Auto Power Saving” modes
available channels in the busy public 2.4GHz universal band. It ensures
with ultra low battery power consumption; it only requires 6mA
better quality of wireless communication.
of electric current to operate.
Ultra Low Battery Power Consumption - Only 8mA!
2.4G6 is designed with “4-Level Auto Power Saving” modes. With ultra low battery power consumption, it only requires 8mA of electric
current to operate.
Specifications
RF Data Transmit Rate
2Mbps
Frequency
ID Codes
1,048,576 sets
Channels
2.402GHz～2.480GHz
16 channels
-1-
Hardware Installation
Step 1: Inserting the Batteries
A. Press the tab on the battery cover
B. Insert the supplied batteries, making sure that the
locates on the mouse as shown here
positive (+) and negative (-) ends of the battery match
and removes the cover.
the polarity indicators inside the battery housing.
C. Slide the batter cover back into its
position until it “clicks” firmly into place.
Step 2: Connect the Receiver
For Notebook computer:
A. Insert the USB receiver into the USB port of your Notebook computer.
For PC computer:
A. Insert the USB receiver into the USB port on desktop computer or Via USB HUB.
B. The USB receiver will automatically be recognized by your computer.
-2-
C. Press the “connect” button on the USB receiver as shown, the
Green Power LED will light up, and starts “Blinking”.
D. Press the connect button on the bottom of the mouse. >> Now,
you can use the mouse.
E. Immediately Press the “connect” button on the bottom of the mouse, If you can’t find or see your cursor on the screen, follow the steps
below:
1. Unplug and re-plug the receiver
2. Test the device on another USB port or computer.
3. Some surfaces may “trick” the optical sensor, such as reflective surfaces like glass or mirrors. The Optical sensor should
perform well on all other surfaces.
Power Management of the Mouse
1. To power on the mouse, press the connect button on the bottom of the mouse
once.
Power on/off
Switch
2. To turn off the mouse, press and hold the connect button on the bottom of the
mouse until its optical light (LED) turns off.
Note: Removing the batteries will require you to repeat steps A-D.
-3-
Wireless Range
Any electrical device, such as the computer monitor, Zip drives, speakers, etc., can cause interference with the wireless mouse. Most likely, this
will effect tracking of pointing devices or the range of the device. To make sure that your keyboard transmits and receives properly, refer to the
following instructions:
1. For optimal performance, place the receiver at least 8 inches (20 centimeters) away
from other electrical devices, such as the computer
monitor, Zip drives, speakers…etc.
Keep 8 inches
2. The effective distance of wireless product should be no farther than 7 -10 meters. This
will ensure optimal communication between the product and the USB receiver.
NOTE: You should always get at least a 3 meters range. If you find that your cordless device gets less than a 3. meters range, please
replace the batteries with a fresh set, perform the synchronization procedure for the mouse and test the range again. If the range is still
below 3 meters, please test your device on another system, preferably in a different environment. If you find it gets the same range on
another system, please contact A4 TECH support to obtain information about a warranty replacement. However, if the range improves on
another system, then it may be an environmental variable. Use the suggestions above to resolve the environmental interference issue.
Operating Warnings: For optimal performance and RF (Radio Frequency) reception:
1. Avoid using the wireless mouse on a metal desk or a desk with a metal frame can cause problems with pointing device behavior and range.
2. The mouse will enter a suspend mode at the same time your computer dose, click a button on the mouse presenter to activate it.
3. Never use the mouse on the glass or mirrored surface.
-4-
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1)
THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
Federal Communications Commission Requirements
The equipment has been tested and found to comply with the limits for Class B Digital Device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to
radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
●Reorient of relocate the receiving antenna.
●Increase the separation between the equipment and receiver.
●Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
●Consult the dealer or an experienced radio/TV technician for help.
THE CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID
THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
System Requirements：
To use the mouse presenter, your computer must meet the following hardware requirements and run one of the operating system listed below.
Hardware
Operating System
● Package Includes：
□ IBM or Compatible PC
□ Windows 2000, XP, MCE2005, XP (x64),
□ 2.4GHz RF Mouse
□ Hard Disk Driver
□ USB Port
2003(x64), and VISTA
□ USB RF Receiver
□ 2 AAA Alkaline Batteries
□ User’s Manual
Tech Support
For tech support, please visit our website at http://support.a4tech.com/ or email us at support@a4tech.com
-5-
**Features and specifications of all A4 TECH products are subject to change without notification.
-6-

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Create Date                     : 2007:12:26 10:05:01+08:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2007:12:26 10:05:01+08:00
Format                          : application/pdf
Creator                         : Administrator
Title                           : Microsoft Word - 2.4G RF Mouse Manual.doc
Document ID                     : uuid:5d4a3885-1ffa-4729-9335-bc9dbbee0397
Instance ID                     : uuid:4d14ad9a-f0d2-4f89-8acc-41028c0fbe58
Page Count                      : 7
Author                          : Administrator

EXIF Metadata provided by EXIF.tools