A and D Co AD1321-10MW Wireless Module User Manual
A&D; Co Ltd Wireless Module
User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2038522 |
| Application ID | 2nUnfyQJJnLANLY6fJTVKg== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 8.82kB (110212 bits) |
| Date Submitted | 2013-08-09 00:00:00 |
| Date Available | 2013-08-09 00:00:00 |
| Creation Date | 2013-08-05 11:41:47 |
| Producing Software | Acrobat Distiller 8.1.0 (Windows) |
| Document Lastmod | 2013-08-05 18:40:03 |
| Document Title | Microsoft Word - AD1321-10MW ＺｉｇＢｅｅModule Manual　130805.doc |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | ONODERA-205 |
AD1321-10MW ZigBee Module Manual 1, OUTLOOK This model is the general-purpose ZigBee module using the ISM band of the 2.4GHz zone at 10mW. It has an outside antenna terminal. You can control the module by an AT command and send data in a protocol of SPI (CSI) of the serial communication. 2, CAUTION & NOTICE FCC CAUTION z Changes or modifications not expressly approved by the party responsible for compliance could void the userâs authority to operate the equipment. FCC NOTICE z FCC compliance statements are required to be included in the user manual of final system. z This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. z This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. z This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. z This equipment complies with FCC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65. This equipment has very low levels of RF energy that it is deemed to comply without testing of specific absorption ratio (SAR). z When you use this module in your products, Please specify as follow sentence to your product. [Contains Transmitter Module FCC ID:KSNAD1321-10MW] Or [Contains FCC ID:KSNAD1321-10MW] A&D Company,Limited
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : ONODERA-205 Create Date : 2013:08:05 11:41:47+09:00 Modify Date : 2013:08:05 18:40:03+09:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Format : application/pdf Creator : ONODERA-205 Title : Microsoft Word - AD1321-10MW ＺｉｇＢｅｅModule Manual 130805.doc Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2013:08:05 18:40:03+09:00 Producer : Acrobat Distiller 8.1.0 (Windows) Document ID : uuid:f3a642c1-e1ef-4fe9-8e38-f6dfc09e27ed Instance ID : uuid:2812627f-def3-4505-add1-6e7d13dfe9c9 Page Count : 1EXIF Metadata provided by EXIF.tools