A and H Design Group BV-001RX Wireless remote control vibrator User Manual

A&H; Design Group, Ltd. Wireless remote control vibrator

User manual

2 3
OVERVIEW
b-VibeTM products are made with silky smooth, body-
safe silicone. Our products are phthalate-free and
latex-free.
The easy to use interface allows users to easily reach
your desired stimulation and intensity level. Get ready
for sensual satisfaction that can not be matched and
will have you craving for more.
b-VibeTM Rimming Plug
4 5
Internal
Stimulator
Rimming
Beads
Base
Control
Button
Magnetic
Charging
Contact
LED
Indicator
Decrease
Intensity/
Rotation
speed
Power
Button
Vibration
Function
Button
Rotation
Button
Increase
Intensity/
Rotation
speed
RIMMING PLUG WIRELESS REMOTE CONTROL
7
GETTING STARTED
1. Before first use, charge your
plug for approximately 2 hours.
The USB charging cable can
be plugged into any USB port
or USB/AC power adapter (not
included)
• Flashing Light = Charging
• Solid Light = Fully Charged
• Rapid Flashing Light = Low
battery, charge is needed
2. Wash your plug with soap and
water, or toy cleaner suitable for
use with silicone items.
FAQs can be found at
www.bvibe.com
Email us at
customerservice@bvibe.com
for any unanswered questions
3. Lubricate your plug with
a water based, silicone
compatible lubricant.
4. Turn ON your plug by
pressing quickly at the
bottom of your plug.
The light will flash, indiciating
the power is on and in standby
mode.
Push again to use the
manual mode, or push
on the remote to pair
the remote & plug.
Once in use, the base light will
change from flashing to solid.
TOY CLEANER
LUBE
8 9
5. To change the vibration intensity
and/or rotation speed via the base
control, press the A .To change the
vibration intensity and/or rotation
speed via the remote control press
and release the A and the A
5. To change the vibration intensity
and/or rotation speed via the remote
control press and release A (Increase
Intensity/Rotation speed)and A
(Decrease Intensity/Rotation speed)
1. To turn the item ON quickly press
The will flash to indicate the
power is on. Push again to change the
vibration pattern. There are a total of 8
modes using the manual control.
2. To power OFF your plug press and
hold for 2 seconds. LED will turn off
to indicate the power is OFF.
MANUAL CONTROL
1
2
10 11
1. First turn your plug on in standby
mode by quickly pressing on your
plug.
2. While the baselight is flashing, power
on your remote to pair the remote &
plug.
3. Once the item is paired the base light
will become solid and you can control
your plug by remote.
4. Press and release to increase
vibration intensity and/or rotation speed.
5. Press and release to decrease
vibration intensity and/or rotation speed
6. To change the independent vibration
mode in the top press and release
7. Holding or for 3 seconds will
turn off the independent shaft vibrator
and/or rimming beads.
8. Holding or for 3 seconds will
turn on the independent shaft vibrator
and/or rimming beads.
9. To turn the item ON/OFF press and
release on the remote
10. To completely turn off your plug,
press and hold on your plug.
REMOTE CONTROL
12 13
CHARGING YOUR PLUG CHANGING YOUR REMOTE CONTROL BATTERY
• Attach the magnetic charging
plug to the designated
charging area on the base of
the product
• Flashing light indicates item
is charging
• Solid light indicates item is
fully charged
• Plugs require approximately
2.5 hours for full charge
• Slide open the remote
control battery compartment
as shown.
• Button cell CR 2032 has been
preinstalled into the remote
control.
• Remove the paper slip inside
the battery compartment
to activate the power in the
remote control.
• Suggested to remove the
battery from the remote
control for extended stroage.
Store the remote control and
the battery seperately.
Flashing light = Charging
Solid light = Fully Charged
OPEN
14 15
TRAVEL LOCK
• All b-Vibe items include travel lock for
safe and convenient travel
For the remote:
Simultaneously press and hold the
and buttons for 3 seconds.
Flashing light will indicate the item
is locked.
To unlock simply press and hold and
again for 3 seconds. Flashing light will
indicate lock is disabled.
For the plug:
Hold for 5 seconds, flashing light
will indicate the item is locked. For
unlocking, hold again for 5 seconds,
flashing light will indicate the item is
unlocked.
12
3
1
2
3
4
5
15
VIBRATING MODES
Internal
Stimulator
Rimming
Beads
1. Low Vibration
2. Medium Vibration
5. Wave
4. Maximum Vibration
3. High Vibration
6. Pulse
7. Ascend
8. Oscillate
9. Random
1. Low
2. Speed II
3. Speed III
4. Speed IV
5. Speed V
6. Speed VI
7. Speed VII
8. Speed VIII
9. Maximum
16 17
1. Always clean your plug thoroughly
before and after each use.
2. We recommend premium water-
based lubricant. Silicone-based
lubricants are not recommended and
can cause damage to the product.
3. To properly clean your plug,
wash with luke-warm water and a
respected antibacterial soap. Rinse
clean and pat dry using a lint-free
cloth or towel. Do not use cleaners
containing alcohol, petrol or acetone.
4. Avoid leaving your plug in direct
sunlight and never expose it to
extreme heat.
5. Our products are designed to
be water submersable and are
safe to immerse in water.
If your plug appears to function
abnormally, turn OFF and consult
our customer care section on
bvibe.com, where you will find
help tips. Should you require
further assistance please contact:
customerservice@bvibe.com
b-Vibe Care
Cleaning, Storage & Safety
TOY CLEANER
LUBE
18 19
Materials
Size
Weight
Battery
Charging
Use Time
Max Noise Level
Interface
Body Safe
Silicone/ ABS
151 x 79 x 41 mm
197 g
Battery li-ion
550m-Ah
1.5 hours
1.5 hours
< 68 dB
Single Button
Manual Control
5 Button Remote
Control
SPECIFICATIONS
The crossed-out dustbin symbol indicates that these items should not be
treated as household waste, but rather brought to the appropriate collection
point for recycling electrical and electronic equipment.
DISPOSAL INFORMATION
Disposal of old electronic equipment (applicable in the EU and other
European countries with separate waste collection systems):
20 21
Declaration of Conformity
Hereby, b-Vibe declares that this Rimming Plug product is in compliance with
essential requirements and other relevant provisions of Directive 1999/5/EC. A
copy of the Declaration of conformity can be found at www.bvibe.com
R&TTE STATEMENT:
FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment o and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/ TV technician for help.
Declaration of Conformity
We declare on our sole responsibility that this equipment complies with the essential
requirements of the Radio and Telecommunications Terminal Equipment Directive,
1999/5/EC, and that any applicable Essential Test Suite measurements have been
performed.
CE versions of the Wireless remote control vibrator (Model No.: BV-001 BLK, BV-001
TL) which display the CE symbol on the product label, comply with the essential
requirements of the European Radio and Telecommunication Terminal Directive
1999/5/CE.
22 23
Designed and Developed by
b-VibeTM
Made in China
© 2015 b-VibeTM
Complete user instructions in additional
languages and FAQ can be found at:
www.bvibe.com
Email us at
customerservice@bvibe.com
for any unanswered questions
bvibe.com

Navigation menu