ACCO 72241 PilotMouse Laser Wireless Pro User Manual
ACCO Brands, Inc. PilotMouse Laser Wireless Pro Users Manual
ACCO >
Users Manual
72241_B.qxd 7/28/05 5:36 PM Page 1 PilotMouse Laser Wireless Pro User Manual Index Battery Installation . . . . . . . . . . . . . . . . . . . . . . .page 2 Wireless Installation . . . . . . . . . . . . . . . . . . . . . .page 3–4 Common Troubleshooting Steps . . . . . . . . . .page 5 Optional Battery Saving Feature . . . . . . . . . .page 6 Comfort Guidelines . . . . . . . . . . . . . . . . . . . . . .page 7 Technical Support . . . . . . . . . . . . . . . . . . . . . . . .page 8 Warranty Information . . . . . . . . . . . . . . . . . . . .page 9–11 PilotMouse Laser Wireless Pro • 1 72241_B.qxd 7/28/05 5:36 PM Page 2 Battery Installation Wireless Installation Please be sure the batteries are installed properly in the mouse. The proper orientation for the batteries is indicated in the battery compartment for each device. To Establish a Wireless Connection: Average battery life for your wireless mouse is 2-3 months, depending on usage. Plug the USB Wireless Receiver into a USB port on your computer. The wireless receiver indicator light will turn red when your batteries are low. Your mouse should now be ready to use. After placing batteries in the mouse, make sure that the slide switch (3) on the underside of the mouse is in the “on” position. Re-establishing a Wireless Connection: If the connection between your mouse and receiver is broken (mouse is in proper working order working with good batteries, and the receiver is installed properly, yet it is not working), or if you are experiencing interference (often detected by erratic or halted cursor movement), you may need to re-establish a wireless connection. 2 • PilotMouse Laser Wireless Pro PilotMouse Laser Wireless Pro • 3 72241_B.qxd 7/28/05 5:36 PM Page 4 To Re-establish a Wireless Connection: With the USB receiver in position and mouse turned on, press the “connect” button on the receiver (1), and within 10 seconds, also press the “connect” button on the bottom of the mouse (2). You have now established a new connection for the mouse. If this does not work, try repeating these steps while holding the mouse close to the receiver. This step may need to be repeated 2–3 times for the mouse to synchronize. If necessary, repeat this procedure after replacing depleted batteries. IMPORTANT: This wireless device is similar to an FM radio, the position of your computer and surrounding objects (especially metal objects) may effect your wireless reception and range (average range is approximately 10 meters or 30 feet). NOTE: Unlike older optical mice, a laser mouse does not emit visible light. Your new mouse will operate correctly even if you do not see a light. Common Troubleshooting Steps 1. Unplug and re-plug the receiver. Repeat steps listed on pages 3 & 4 to re-establish a wireless connection 2. Install a fresh set of batteries in the mouse 3. Test the device on another USB port or computer. 4. Some surfaces may “trick” the laser sensor, such as reflective surfaces like glass or mirrors. The laser sensor should perform well on all other surfaces. 5. If you would like to program buttons, have advanced acceleration control or set a rest reminder, please visit www.software.kensington.com to download the latest MouseWorks software. Be sure to install the correct version for your mouse. 6. To establish a wireless connection, see instructions on pages 3 & 4. 7. To save battery power, turn off the mouse when not in use. See instructions on page 6. Installing Kensington MouseWorks® software To access full functionality for your new mouse install Kensington MouseWorks® software. The install is optional; your mouse will function without installing the software. 4 • PilotMouse Laser Wireless Pro PilotMouse Laser Wireless Pro • 5 72241_B.qxd 7/28/05 5:36 PM Page 6 Optional Battery Saving Feature Comfort Guidelines Please visit HealthyComputing.com for helpful comfort tips when using this device. Important: Computer User Health Information In recent years, medical attention on occupational injuries has identified normal, seemingly harmless activities as a potential cause of a wide range of problems collectively known as Repetitive Stress Injuries (RSI) or Cumulative Trauma Disorders (CTD). It is now recognized that any repetitive motion may contribute to these health problems. As a computer user, you might also be at risk. To preserve battery life when not using the mouse for long periods of time, slide the switch (3) to off. 6 • PilotMouse Laser Wireless Pro By paying attention to the way you perform your work, use your computer and phone, play sports, and work around the house, you can identify the behaviors that may be putting you at risk. If you experience pain, swelling, numbness, or weakness in your wrists or hands (especially during sleep), see your physician immediately. For helpful information, visit www.HealthyComputing.com or a reputable book. PilotMouse Laser Wireless Pro • 7 72241_B.qxd 7/28/05 5:36 PM Page 8 Technical Support In North America, technical support is available to all registered users of Kensington products. There is no charge for technical support except long distance charges where applicable. Technical Support Contact information can be found on the back cover of this manual. Technical Support Tips: • You may find the answer to your problem in the Frequently Asked Questions (FAQ) section of the Support area on the Kensington Website: www.support.kensington.com. • Call from a phone where you have access to your computer. • Be prepared to provide the following information: 1. Name, address, and telephone number 2. The name of the Kensington product 3. Make and model of your computer 4. Your system software and version 5. Symptoms of the problem and what led to them 8 • PilotMouse Laser Wireless Pro 5-Year Warranty KENSINGTON TECHNOLOGY GROUP (“KENSINGTON”) warrants this Kensington PilotMouse Laser Wireless Pro against defects in material and workmanship under normal use and service for five years from the original date of purchase. KENSINGTON, at its option, shall repair or replace the defective unit covered by this warranty. Please retain the dated sales receipt as evidence of the date of purchase. You will need it for any warranty service. In order to keep this warranty in effect, the product must have been handled and used as prescribed in the instructions accompanying this warranty. This warranty does not cover any damage due to accident, misuse, abuse, or negligence. This warranty is valid only if the product is used on the computer or system specified on the product box. Please check product box for details or call technical support. Repair or replacement, as provided under this warranty, is your exclusive remedy. KENSINGTON shall not be liable for any incidental or consequential damages. Implied warranties of merchantability and fitness for a particular purpose on this product are limited to the duration of this warranty. Some states/countries do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Some states/countries do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state and country to country. PilotMouse Laser Wireless Pro • 9 72241_B.qxd 7/28/05 5:36 PM Page 10 Federal Communications Commission Radio Frequency Interference Statement Note: The Kensington PilotMouse Laser Wireless Pro model no. 72241 has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Declaration of Conformity Compliance Statement for the Kensington PilotMouse Laser Wireless Pro The Kensington PilotMouse Laser Wireless Pro model no. 72241 complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) This device may not cause harmful interference, and, (2) this device must accept any interference received, including interference that may cause undesired operation. As defined in Section 2.909 of the FCC Rules, the responsible party for this device is Kensington Technology Group, 333 Twin Dolphin Drive, Sixth Floor, Redwood Shores, CA 94065, USA, (800) 535-4242. The Following information is only for EU-member states: The use of the symbol indicates that this product may not be treated as household waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product. MODIFICATIONS: Modifications not expressly approved by Kensington may void the user’s authority to operate the device under FCC regulations and must not be made. SHIELDED CABLES: In order to meet FCC requirements, all connections to equipment using a Kensington input device should be made using only the shielded cable provided. 10 • PilotMouse Laser Wireless Pro PilotMouse Laser Wireless Pro • 11 72241_B.qxd 7/28/05 5:36 PM Page 12 Contacting Kensington Troubleshooting information and answers to frequently asked questions are available 24 hours a day on the Kensington Website at www.support.kensington.com. Support by Telephone Technical Support is available by telephone. Please visit www.kensington.com for hours. U.S. and Canada 800-535-4242 Mexico 52(55)5384-0620 Kensington Technology Group 333 Twin Dolphin Drive Sixth Floor Redwood Shores, CA 94065 USA ACCO Europe PLC Gatehouse Road Aylesbury Bucks, HP19 8DT UNITED KINGDOM ACCO Canada Inc. 5 Precidio Court Brampton, Ontario L6S 6B7 CANADA www.kensington.com This manual is copyright © 2005 Kensington Technology Group, a division of ACCO Brands, Inc. Any unauthorized copying, duplicating, or other reproduction of the contents hereof is prohibited without written consent from Kensington Technology Group. All rights reserved. 7/05 Kensington is a registered U.S. trademark of ACCO World Corporation with issued registrations and pending application in other countries throughout the world. MouseWorks is a registered U.S. trademark of ACCO World Corporation. All other registered and unregistered trademarks are the property of their respective owners. 12 • PilotMouse Laser Wireless Pro 901-1837-00
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No XMP Toolkit : 3.1-701 Create Date : 2005:07:28 17:38:04Z Modify Date : 2006:01:25 14:04:01+08:00 Metadata Date : 2006:01:25 14:04:01+08:00 Producer : Acrobat Distiller 4.0 for Macintosh Format : application/pdf Document ID : uuid:2f097afd-4f98-4fd0-b344-3b0e01b1a6da Instance ID : uuid:363534ab-bc04-4fea-81af-ed3a110b0fd3 Page Count : 7EXIF Metadata provided by EXIF.tools