ACCO V10472 Nobo Kapture USB Receiver User Manual Manual

Download:
Mirror Download [FCC.gov]
Document ID	1205773
Application ID	Y95pQNPsJTPsr1IIcbtaSA==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	337.19kB (4214820 bits)
Date Submitted	2009-11-27 00:00:00
Date Available	2009-12-01 00:00:00
Creation Date	2009-10-29 12:07:38
Document Lastmod	2009-10-29 12:07:38
Document Title	Manual

DRAFT - v3.0d 29/10/2009
Contents
Introduction
Introduction / system components
Digital marker pen and cartridges
Plug and play USB receiver
Setup card
Digital Flipchart Pads
Pen case
Setup
Setup / digital marker pen
Setup / battery installation
Inserting or replacing the battery
Battery Do’s
Battery Don’ts
Setup / cartridge installation
Installing a cartridge
Check correct cartridge installation
Setup / storing the cartridge cap
Removing the cartridge cap
Storing the cartridge cap
Refitting the cartridge cap
Setup / Digital Flipchart Pad
Digital Flipchart Pad overview
Setup the Digital Flipchart Pad(s)
Setup / software overview
Software overview
Capture mode
Help mode
Software custom pages
Returning to a previously created session
File saving
Setup / initial system setup
10
10
10
10
10
10
10
11
Computer and pen communication
11
Set the pen colour
11
Operation
12
Operation / capturing
12
Capturing from the flipchart pad
12
Reference
12
Reference / software / launch page
13
Reference / software / error page
14
Reference / software / pen management
15
Reference / software / help page
16
Reference / software / page information
17
Reference / software / save
18
Reference / software / file manager
19
Reference / software / capture mode
20
Reference / software / edit mode
21
Reference / icon quick reference guide
22
Reference / icon quick reference guide
23
Reference / Nobo Kapture™ guide to good capturing
24
Reference / miscellaneous
25
Pen LED status matrix
25
One-year limited warranty
25
Disclaimer of warranty
25
Limitation of liability
25
RF technical specifications
25
FCC radiation exposure statement
26
Federal communications commission radio frequency interference
statement
26
FCC declaration of conformity compliance statement
26
CE declaration of conformity
26
Product safety
27
Produt care
28
Introduction
Thank you for choosing Nobo Kapture™ Digital Flipchart.
We are sure it will serve you well, but please take a little time to study these
instructions to ensure you get the best out of the product.
• Capture - Notes and ideas written on the Digital Flipchart Pad are instantly
captured onto your PC / Mac.
• Edit - Modify captured sessions and export the files in various formats.
• Share - Email files to meeting attendees, colleagues or clients.
Safety First
This system is safe to use as long as you observe a few basic precautions.
• Any attempt to repair this unit by unqualified personnel will invalidate the
warranty. This unit does not require servicing.
• Do not use near water.
• Do not use aerosol dusters or cleaners. Do not clean with solvents or abrasives.
• LED Radiation - Class 1 LED product.
Do not view directly with optical instruments.
Performance
Operating time - up to 5 hours (pen down 100%)
Battery standby time - up to 6 months (no use)
Range - up to 10m
Cartridges
Cartridges contain dry erase ink suitable for flipchart pads and dry erase boards
Digital Flipchart Pads
There are four pads available:
Pad type
Sheets
60
60
60
20
(only available in starter kit)
Re-order code
1902592
(3 x 60 sheet pad - pads not to be
sold separately)
NA
Specifications
Minimum system requirements
Windows® XP SP2 / Vista™ or MAC OS X 10.5
Available USB 2.0 port
Internet connection for updates
Processor - 1.0GHz minimum (2.5GHz or higher recommended)
RAM - 512Mb minimum (1Gb recommended)
Hard Disk - 500Mb available space required
RF technical specification
Bluetooth class 2 (2.4GHz)
Battery type
1 x AAA Alkaline battery (LR03) non-rechargeable
Introduction / system components
Digital marker pen and cartridges
1 The system can be used with up to four digital marker pens.
The marker pen accepts disposable dry erase cartridges of either red, blue,
green or black ink.
Re-order codes:
Black (x6) 1902595.
Assorted (2 x red, 2 x blue, 2 x green) 1902596.
Spare pen 1902594.
Plug and play USB receiver
2 The plug and play USB receiver allows communication between the digital
marker pens and the computer. The Nobo Kapture™ software is pre-installed
on this USB receiver as a self-extracting file, with on-screen prompts for easy
installation.
Setup card
3 For setup and pairing of the pen to the system. Also allows on-screen colour
to be changed to match the cartridge in the digital marker pen.
Digital Flipchart Pads
4 The Nobo Kapture™ has 3 pads in the range (B, C, D) which can all be used in
one session, giving up to 180 unique pages in each session.
Re-order code 1902592 (60 sheet pad only).
Note:
Only one pad of each letter type can be used in a session.
(e.g. 1 pad B, 1 pad C and 1 pad D only)
Pen case
5 For the safe storage of two digital marker pens, USB receiver and setup card.
Setup / digital marker pen
Battery cover
Cartridge cover
Cartridge
Battery (1 x AAA)
Cartridge location pip
Digital marker pen
Status LED
Battery cover release button
Cartridge holder
Cartridge cover release button
Camera
Cartridge cap
Setup / battery installation
1 x AAA battery
Inserting or replacing the battery
1 Turn the pen upside down.
With a firm hold on the body of the pen push the red release button at the
base of the pen downwards (1).
Battery Do’s
• Use only alkaline batteries of AAA (LR03) type.
• Remove the battery from the pen and store in a cool, dry, clean place if it will not
be used for a long period of time.
• Dispose of the battery taking note of any local regulations.
Slide the battery cover away from the body of the pen (2).
Battery Don’ts
If replacing the battery remove the old battery.
• Do not short-circuit the battery. A short-circuit may cause severe damage to the
battery.
Insert the new battery, observing correct polarity (positive [+] end first).
• Do not drop, hit or otherwise abuse the battery as this may result in the exposure
of cell contents, which are corrosive.
Replace the battery cover by inserting the tab into the slot (1) and sliding the
cover down until it clicks into place (2).
Switch on the digital marker pen by placing the nib (with or without the cap)
on a surface. The pen will switch on and be ready to use within 3 seconds. The
pen will automatically switch off after a period of inactivity.
• Do not attempt to recharge the battery.
• Do not expose the battery to moisture or rain.
• Keep the battery away from fire or other sources of extreme heat. Do not
incinerate. Exposure of the battery to extreme heat may result in an explosion.
Setup / cartridge installation
Note:
Spine should be
facing upwards
Installing a cartridge
1 With the pen facing the correct way up and a firm hold on the body of it, push
the red release button in the centre of the pen downwards (1).
Slide the cartridge cover forward (2).
Insert the cartridge into the cartridge holder (1).
Check correct cartridge installation
The cartridge is correctly inserted when:
• the spine is facing upwards.
• it is seated flat in the carrier.
• there is slight forward and backward movement present.
Note:
Due to moving parts the pen will rattle slightly when gently shaken.
Slide the cartridge down into position(2).
Replace the cartridge cover by aligning the cover over the top of the cartridge
cap.
Slide the cover along the body of the pen until it clicks into place.
Setup / storing the cartridge cap
Removing the cartridge cap
1 With a firm hold on the body of the pen, rotate the cap 90º.
Pull the cap clear of the pen.
Storing the cartridge cap
3 The cap can be stored on the rear end of the pen.
Refitting the cartridge cap
4 Refit the cap to the cartridge ensuring the arrow is at the top.
Push the cap until it clicks into place.
Note:
6 It is possible to put the cap on upside down, to rectify this rotate the cap until the
arrow is at the top. Push the cap until it clicks into place.
Setup / Digital Flipchart Pad
Digital Flipchart Pad overview
The Nobo Kapture™ system uses uniquely printed paper, which the camera uses to
recognise its location on the page. There are 180 individual sheets across the pad
range, separated into pad B, C and D. It is possible to use all pads at the same time
(B, C & D), but it is not possible to use more than one of a particular pad letter. i.e. it is
not possible to use two pad D’s in one session. All pad D’s are printed with the same
pages, therefore the system will overwrite or miss information if two are in the same
session.
As each sheet of paper within pad B, C & D is individual the system recognises which
sheet of which pad it is writing on.
The Nobo Kapture™ software automatically opens a digital flipchart page on the
computer when you start to write or draw on the physical flipchart page of a pad.
Each physical flipchart page has its pad letter and page number shown in the
bottom right hand corner, so if you tear pages from the pad you can still keep
track of which page is in use.
The page also has hidden pad type and page identifiers that the pen recognises to
allow the Nobo Kapture™ software to keep track of which page is in use.
Notes:
Standard non-digital flipchart pads will not work with this system, only use Nobo
Kapture™ Digital Flipchart Pads.
Do not try to use two Digital Flipchart Pads of the same Letter (e.g. B & B) at the same time,
accurate capturing will not be possible.
Setup the Digital Flipchart Pad(s)
2 Place the required flipchart pads on your Nobo Easel.
See www.noboeurope.com for details of our easel range. The list below are
some of our leading models available throughout Europe.
Piranha Mobile Easel - 1901920
Piranha Static Easel - 1901919
Barracuda Mobile Easel - 1902386
Shark Easel - 1901918
Setup / software overview
Software overview
Returning to a previously created session
The Nobo Kapture™ software starts with the home page, from which Capture, Edit
and Help modes are accessed:
The link between the software and the recorded information is the Nobo Kapture™
digital flipchart paper. By retaining a physical page from a session it is possible to reopen the session in capture mode and add to the page.
Notes:
• It is not possible to erase marks on physical pages made in the previous session.
Capture mode
Captured pages can be displayed in an overview mode, showing
active pages of a pad, for clarity.
• To edit the content of a page open it in editor mode and cut and paste or rearrange it.
Edit mode
Captured pages can be edited, re-ordered or have sections cut-out
from the pages themselves and pasted into new additional pages
in the software. Pads or pages can then be saved as commonly
used file formats such as JPEG or PDF, ready for emailing.
Help mode
• Pages that have been edited within edit mode cannot be re-opened in capture
mode.
File saving
By default, saved files will be in ‘My Documents’ on Windows® XP SP2 / Vista™ and
‘Documents’ on MAC OS X 10.5. The filename will be ‘Nobo Kapture’ followed by an
incrementing number.
To save a file and assign it a custom filename and location, go to the file tab and
select ‘Save As’. Browse to the required location and type in the required filename.
Access the following help services:
•
built-in help.
•
software trouble-shooting guide.
•
Nobo website (including software updates and FAQ forum).
Software custom pages
Within the edit mode of the software, there is the ability to add additional pages.
Once you have captured the contents on all of the required physical pages,
additional custom pages can be added, such as the highlights of each page or
specific notes from the session.
The maximum number of physical pages is 180, but significantly more can be added
electronically. Saved files can therefore contain more pages than the physical.
10
Setup / initial system setup
Press and release the button on the USB receiver.
Lift the pen, the light will flash green, it will return to solid green when paired
to the system.
Computer and pen communication
1 Insert the plug and play USB receiver into a free USB port on the computer.
The USB receiver status light will flash red, blue then green. The Nobo
Kapture™ software installer will automatically start. If it does not auto-run, start
the application manually by navigating to it via Windows explorer or Mac OS
finder.
The LED light will be red until the software is launched, upon which it will turn
blue.
Follow the on-screen instructions to install the Nobo Kapture™ software.
Confirm there is a battery installed in the pen.
Start up the installed Nobo Kapture™ software (
) and select capture
mode (
) followed by pen management mode (
).
Touch the pen (with or without the cap) to the middle of the setup card, hold
it there until the LED turns solid green.
The pen will appear in the pen status area of pen management mode.
The pen is now paired to the system.
Set the pen colour
4 Touch the pen to the colour area on the setup card that matches the colour of
the installed ink cartridge. The colour shown in the pen management mode/
colour area will change to the selected colour. The pen is now ready to use.
Note:
Once the pen is paired it will remain paired to that USB receiver. Pens can be deleted
through the software. Additional pens must be paired in the same way as the first.
Pairing is unaffected by loss of power or changing the pens battery.
The USB receiver must remain in the USB port while capturing.
11
Operation / capturing
Capturing from the flipchart pad
1 Remove the cap from the pen.
Tap the pen on the pad to ‘wake’ the pen.
Tips for accurate capturing:
• The Nobo Kapture™ software needs to be on the capture screen to capture what
is being written.
• Ensure the camera is not obscured when writing.
• Do not use a cartridge with a damaged tip.
Begin writing or drawing on the Digital Flipchart Pad, the information will be
displayed on the computer in real time.
See ‘Reference / software / page view’ on page 21 for the options available
including zoom, multiple page views and edit mode.
When you have finished the capturing session click on save to store the pages
in the system.
• Hold the pen the correct way up, the LED should face upwards.
• Write normally with even pressure.
• Stay within the range of the system, which is up to 10 metres from the USB
receiver.
• Ensure there is enough battery life left for the current session. A battery status
indicator can be found in the pen management section of the software.
• Periodically check with the software to ensure you are within range and capturing
is working ok.
12
Reference / software / launch page
Capture mode
Note:
All screens shown are for PC installation, Mac screens may vary.
Edit mode
Help
13
Reference / software / error page
This screen appears when the USB receiver is not inserted. When the icon is red it indicates a pen warning or error.
14
Reference / software / pen management
Pen management mode
Battery status
Pen signal strength
Paper warning
To clear a paper warning
click on the icon. A warning
appears when a pen is placed
on a surface other than a
Nobo Kapture™ pad
Identify pen
Demote pen
Puts the pen into sleep
mode, the pen will remain
paired. To wake the pen,
touch it to the pad
Pens in current
session
Remove pen from system
Unpairs a pen permanently
from the system
Pen identifier / colour
Pens sleeping, to wake a pen touch it to
the Nobo Kapture™ pad
Link to Nobo website
15
Reference / software / help page
Help mode
Please follow one of the
below links:
Link to user manual
Help information area
Link to Nobo Kapture™ support
Link to Nobo Kapture™ website
Link to Nobo website
16
Reference / software / page information
Page information
Select ‘Apply’ to save note to current page
Link to Nobo website
17
Reference / software / save
Save
File save options
Link to Nobo website
18
Reference / software / file manager
File manager
File information
area
Link to Nobo website
19
Reference / software / capture mode
Capture mode
Previous page / next page zoom in / zoom out
Page views:
Single
Twin
Quad
Real-time page view
The capture icon will turn red if information is being written but the software is not in ‘Capture mode.
Link to Nobo website
20
Reference / software / edit mode
Edit mode
Edit tools
Zoom in
Zoom out
Select
Resize
Rotate
Cut
Copy
Paste
Erase
Colour palette
Add page
Remove page
Pages used in pad
Current page
Link to Nobo website
21
Reference / icon quick reference guide
Icon
Description
Capture mode
If the capture icon is red it indicates
that the software needs to be in the
capture mode screen to capture
information.
Icon
Description
Save file
If the save icon is red it indicates that
the version on screen is newer than
the saved version.
Open file
Edit mode
Help
Page view - single page
Page view - twin page
Remove pen from system
Demote pen
Paper warning
Battery status
Page view - quad page
Zoom in
Zoom out
Pen management mode
If the pen management mode icon is
red it indicates that there is a warning
or error message.
Select
Link to Nobo website
Resize
Rotate
Cut
22
Reference / icon quick reference guide
Icon
Description
Copy
Paste
Undo
Redo
Erase
Colour palette
Add page
Delete page
Pen signal strength
23
Reference / Nobo Kapture™ guide to good capturing
• Do not use a cartridge with a damaged nib.
• Check the pen is awake before capturing. With the cap on, tap the pen nib on a solid surface. When the LED is
on, the pen is awake (on).
• Hold the digital marker pen the correct way up, the LED should be facing upwards.
• Write normally with even pressure.
• Stay within the range of the system, which is up to 10 metres from the USB receiver.
• Ensure there is enough battery life left for the current session. A battery status indicator can be found in the
pen management section of the software.
• Ensure that you do not have two pads of the same pad letter in a session.
• Check back with your computer to ensure your session is being captured correctly.
• Additional help can be found at http://www.noboeurope.com/Nobokapture
• New versions of software will periodically become available for download, the following phrase will appear
in a pop-up window to prompt installation. ‘A newer version of the software is now available, please click the
following link www.noboeurope.com/Nobokapture’.
The current version of software and latest available version for download will be shown.
24
Reference / miscellaneous
Pen LED status matrix
LED activity
Duration
Status
1 minute
Pen is in idle mode.
1 minute
Pen is in in idle mode and not currently paired to the system.
8 seconds
Pairing of pen to system failed.
1.8 seconds, repeating every 15 seconds
Battery low, replace with new battery.
8 seconds, then shutdown of pen
Battery critical, replace with new battery.
The LED will flash through each colour, red, blue, green, when the USB receiver is inserted into the USB port.
The LED will remain solid red until the Nobo Kapture™ application has launched, when launch is complete it will turn blue.
One-year limited warranty
Limitation of liability
ACCO Brands Europe Ltd (“ACCO”) warrants this product against defects in material
and workmanship under normal use and service for 1 year from the original date
of purchase. ACCO, at its option, shall repair or replace the defective unit covered
by this warranty. Please retain the dated sales receipt as evidence of the date of
purchase. You will need it for any warranty service. In order to keep this limited
warranty in effect, the product must have been handled and used as prescribed in
the instructions accompanying this warranty. This limited warranty does not cover
any damages due to accident, misuse, abuse or negligence. This limited warranty
is valid only if the product is used with the equipment specified on the product
box. Please check product box for details or contact ACCO technical support.
Repair or replacement of this product, as provided herein, is your exclusive
remedy. ACCO shall not be liable for any special, incidental or consequential
damages, including, but not limited to, lost profits, loss of use of software, loss
or recovery of data, rental of replacement equipment, downtime, damage to
property, and third-party claims, arising out of any theory of recovery, including
warranty, contracts, statutory or tort. Not withstanding the term of any limited
warranty or any warranty implied by law, or in the event that any limited warranty
fails of its essential purpose, in no event will ACCO’s entire liability exceed the
purchase price of this product. Some countries do not allow the exclusion or
limitation of incidental or consequential damages, so the above limitation or
exclusion may not apply to you. This warranty gives you specific legal rights and
you may also have other rights that vary from country to country.
Disclaimer of warranty
Except for the limited warranty provided herein, to the extent permitted by law,
ACCO disclaims all warranties, express or implied, including all warranties of
merchantability and/ or fitness for a particular purpose. To the extent that any
implied warranties may nonetheless exist by operation of law, any such warranties
are limited to six years.
RF technical specifications
Operating frequencies: 2.402 GHz ~ 2.474 GHz
25
Reference / miscellaneous
FCC radiation exposure statement
FCC declaration of conformity compliance statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. End Users must follow the specific operating
instructions for satisfying RF exposure compliance. This transmitter must not be
co-located or operating with any other antenna or transmitter.
This product complies with part 15 subpart C of the FCC rules. Operation is
subject to two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation. As defined in section 2.909 of the FCC rules,
the responsible device is ACCO Brands Europe Ltd, Oxford House, Oxford Road,
Aylesbury, Buckinghamshire, HP218SZ, England.
Federal communications commission radio frequency interference
statement
Note: This device has been tested and found to comply with the limits for a class
B digital device, pursuant to part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment causes harmful interference to radio of television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the
following methods:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.
Modifications: Modifications not expressly approved by ACCO may void the user’s
authority to operate the device under FCC regulations and must not be made.
Shielded Cables: In order to meet FCC requirements, all connections to equipment
using an ACCO device should be made using only shielded cables.
CE declaration of conformity
ACCO declare that this product is in compliance with the essential requirements
and other relevant provisions of applicable EC directives.
The following information is only for EU-member states
The use of the symbol indicates that this product may not be treated
as household waste. By ensuring this product is disposed of correctly,
you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused
by inappropriate waste handling of this product. For more detailed
information about recycling of this product, please contact your local
city office, your household waste recycling centre or the shop where
you purchased the product.
Nobo and ACCO are registered trademarks of ACCO Brands. Mac and the Mac
logos are trademarks of Apple Inc, registered in the US and other countries.
Windows Vista and the Windows logo are trademarks of the Microsoft group of
countries. All other trademarks are the property of their respective owners.
© 2009 ACCO Brands Europe Ltd, a division of ACCO Brands Corporation. Any
unauthorized copying, duplicating, or other reproduction of the contents hereof is
prohibited without written consent from ACCO Brands Europe. All rights reserved.
26
Reference / miscellaneous
ACCO Brands Europe
Oxford House
Oxford Road
Aylesbury
Buckinghamshire
HP21 8SZ
For technical support visit:
http://www.noboeurope.com/nobokapture/support
International toll number: +31 (0) 53 484 9292
Country			
Austria				
Belgium			
Denmark			
Finland				
France				
Germany			
Hungary			
Ireland				
Italy					
The Netherlands		
Norway			
Russia					
Spain					
Sweden			
United Kingdom		
Access number
01 502 842 131
02 256 6696
35 25 80 47
09 2311 3411
01 7020 0007
0696 654 9084
01 777 9105
01 524 5447
02 4527 9097
020 504 0650
22 97 17 26
810 8000 22208 1044
917 456 220
08 5792 9066
0207 744 1051
LED RADIATION
DO NOT VIEW DIRECTLY
WITH OPTICAL INSTRUMENTS
CLASS 1 LED PRODUCT
Product safety
• READ THESE SAFETY INSTRUCTIONS CAREFULLY. FAILURE TO FOLLOW THESE
SAFETY INSTRUCTIONS COULD RESULT IN FIRE, ELECTRIC SHOCK, PERSONAL
INJURY OR PROPERTY DAMAGE.
• Only use the digital pen and its accessories in accordance with the user’s guide.
Any other use may result in personal injury or property damage.
• Do not drop, throw, bend or deform, crush, disassemble or open, puncture,
shred, microwave, incinerate, paint, or insert foreign objects into the digital pen
or its accessories. Failure to follow these instructions could result in personal
injury or property damage.
• The digital pen and its accessories contain small separable parts which may
present a choking hazard. Choking could result in injury or death.
• In the event of a battery leak, do not allow the liquid to come in contact with
skin or eyes. This may result in personal injury. If contact has been made, wash
the affected area with large amounts of water and immediately seek medical
advice.
• Do not ingest the battery. The battery cell contents can be toxic if ingested.
• Do not incinerate used batteries, dispose of batteries in fire, recharge nonrechargeable batteries or short-circuit the supply terminals. Failure to follow
these instructions may result in fire, explosion, electric shock, battery leakage or
other injury or damage.
• Risk of eye damage - invisible infrared light emitted from the digital pen tip. Do
not look directly into the tip. Do not view the tip with an optical device.
27
Reference / miscellaneous
• Remove battery in areas with potentially explosive atmosphere. The digital pen
is an electronic device. Sparks may cause fire or explosion resulting in personal
injury or death or damage to property.
• Remove battery when in a blasting area, to avoid interfering with blasting
operations.
• Remove battery when in an area where posted notices require radio
transmitters to be switched off.
• Aviation regulations may prohibit using wireless devices while in the air.
Remove battery when on an airplane.
• The digital pen may interfere with some hearing aids or other personal medical
devices. If it does, consult the supplier for alternatives or remedies.
Produt care
• Do not expose the device to water or any other fluids. Do not leave it in damp
conditions.
• Do not use the pen near strong radio waves or magnetic fields. It may cause
the pen to malfunction or destroy the pen.
• Do not dispose of this product in the household waste. As with any electronic
product, check with your local waste or recycling company to determine the
correct disposal method and location in your area.
• Do not open or disassemble the device except to replace the battery or the
ink cartridge. There are no other serviceable components inside. The warranty
will become void. Changes or modifications to this unit could void the user’s
authority to operate the equipment.
• Follow the polarity (+/-) diagram in the battery compartment.
• READ THESE INSTRUCTIONS THOROUGHLY. FAILURE TO FOLLOW THESE
INSTRUCTIONS COULD RESULT IN DAMAGE TO THE DIGITAL PEN AND ITS
ACCESSORIES, AND VOIDING THE WARRANTY.
• Replace batteries immediately when notified by the low battery warning.
• Only use the digital pen and its accessories in accordance with the user’s guide.
• Remove the battery before long-term storage of the digital pen. Do not
dispose of used battery in the trash.
• The device is intended for indoor, dry location use only.
• Routinely check the digital pen and accessories for damage. Do not continue
to use the product if there is any damage or broken parts. Consult your point of
purchase if the device needs repair.
• Do not expose the digital pen or its accessories to extreme temperatures or
direct sunlight, neither during use nor during storage.
• Replace only with batteries of the same type as the recommended or with
equivalents.
• As with any battery, check with your local waste or recycling company to
determine the correct disposal method and location in your area.
• Do not use rechargeable batteries. The digital pen and/or the batteries may be
destroyed.
• Keep the device in a clean and dust free place.
• Keep food and beverages away from the device.
• Clean with a dry cloth. Do not use water, soap, detergent or other chemicals.
• Do not drop the device or allow any other kind of strong impact, which can
severely damage it or prevent it from working property.
CBT: 6640/01/0909
28

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Modify Date                     : 2009:10:29 12:07:38Z
Create Date                     : 2009:10:29 12:07:38Z
Metadata Date                   : 2009:10:29 12:07:38Z
Format                          : application/pdf
Document ID                     : uuid:6be7e4b1-d9b6-44f0-9f26-08f872c20533
Instance ID                     : uuid:5b67b6bd-0f0b-48d7-97c2-36121190a926
Page Count                      : 28

EXIF Metadata provided by EXIF.tools