ACE BAYOU OCPBT20 X ROCKER User Manual

ACE BAYOU CORP. X ROCKER Users Manual

Users Manual

User Manual Item no: 5105801Need Help? Email:Phone: 01274 683 109 IMPORTANT: You must keep your original retail receipt as proof of purchase.Torque
2Thank you for purchasing this X Rocker gaming chair. You are now close to enhancing your favourite games with glorious audio!To get started, please assemble the chair using the assembly instrucons on the separate leaet and then follow the instrucons in this manual to get rocking!Table of contents3 Box contents and control panel overview4 Wireless connecon guide: PS45 Wireless connecon guide: Xbox One6 Wireless connecon guide: TV (All systems)7 Wired connecon guide: TV (All consoles) 8 Wired connecon guide: PS4 Controller only9 Bluetooth connecon guide10 Troubleshoong ps11 Health and safety informaon12 Power supply safety informaonWelcome to X Rocker!
3+++ +++Control panel overviewB1 - 3m 3.5mm to 3.5mm Audio cable B2 - 15cm RCA to female 3.5mm audio cable B3 - RCA female to female adaptersB4 - Power supply Cable B7 - Micro USB Cable 0.8mBB1B3B5 B6B4B2+B7
4Step 3: Step 1: Make sure that the PS4™ system is switched OFF. Insert the micro USB cable into the X Rocker DAC converter and the other end into one of the front USB ports Step 2: Turn the PS4™ system back on. Select one of the wireless bands (1,2,3) on the wireless DAC and then switch to the corresponding band on the chair.Save, exit and enjoy!
5Step 1: Make sure that the Xbox One™ system is switched OFF. Insert the micro USB cable into the X Rocker DAC converter and the other end into one of the back USB ports on the Xbox One™ system. Remove the clear Step 2: Turn the Xbox One™ system back on. Select one of the wireless bands (1,2,3) on the wireless DAC and then switch to the corresponding band on the chair. Step 3:> [Display and Sound] > [Audio Output] > under [Digital Audio], select ISave, exit and enjoy!
6Wireless connecon guide: TV (All systems)1. Connect B6 Opcal Cable to the B5 Wirelesss DAC transmier’s SPDIF Port.2. Connect other end of B6 Opcal Cable to the TV Opcal socket.3. Connect Micro USB Cable to the transmier and other end to an available USB socket on the TV.4. Once connected to your TV, increase volume to 50% of the maxiumum for the best sound level.*** N.B: If your TV does not feature an SPDIF or OPTICAL OUT Socket then you can instead use the 3.5mm audio connecon to connect to a headphone socket.** Depending on your TV you may need to enable the Opcal output seperately.B7 B6 TransmierTV/SPDIF/Opcal SocketTV USB socket
7Wired connecon guide: TV(All consoles)1. Connect B1 Cable to X Rocker control panel MP3 INPUT sockets.2. Connect other end of B1 3.5mm end into the headphone socket of your television.3. Once connected to your TV, increase volume to 50% of the maximum for the best sound level. **** Depending on your TV you may need to increase the headphone volume separately in the TV sound sengs. TV/Mobile/TabletB1
8Wired connecon guide: PS4 Controller only1. Connect the B1 cable to the boom of the PS4 controller via the headset socket.2. Connect the other end of the B1 cable to the chair via the green port.3. With the PS4 turned on, go to the main menu (or locate the main menu screen). Press and hold the PS buon on the PS4 controller unl the quick menu appears on screen.4. In this menu select [Adjust sound and devices]5. Then select [output to headphones]6. Change the seng from [Chat Only] to [All audio]7. Make sure the volume in the previous menu is set to the maximum.8. Set the control panel Wireless switch to the ‘OFF’ posion.B1
9Step 1:Step 2:On the Audio output device turn Bluetooth on if it is not on already and search for XROCKERselect the XROCKERIf a passcode is required the four digit code will be ‘0000’.
10Troubleshoong ps• Make sure that the power cable is connected correctly.• Make sure that the power supply at the power source is working correctly.• With the chair turned to the ON posion, give the power cable a slight wiggle in the port. If any lights icker (or not)then please contact support (details below).• Review the connecon methods on the previous page and try alternave connecon methods if possible.• Conrm that the device/system is correctly congured as per previous connecon guide.• Make sure that the wireless channelswitcher is in the corresponding posion that suits your connecon method. (1,2,3 for wireless and AUX for wired connecons).• Please make sure that the volume of the source device is at a higher level to strengthen the audio signal.• Please contact X Rocker support(service@XRockerNaon.co.uk) regarding this issue.• In this case, try another of the three wireless bands to isolate the signal. No power going to control panelIssue Troubleshoong stepsNo soundWireless transmier cuts out during gameplay/No vibraon or subwoofer sound via analogue conneconThe cables connected to myX Rocker have been brokenaccidentallyInterference over wireless connecon
11Health and safety informaon• Avoid immersing or allowing the X Rocker to come into contact with liquids.• Please consult X Rocker Support before unscrewing any of the electrical components on the chair.• Please be mindful of any cabling laid out between the X Rocker and power source/audio device.• Please be mindful of cabling aached when moving/swivelling the X Rocker.• If the cables or electrical equipment are broken then this may present a choking risk, please contact Support for replacements and dispose of these parts safely.• Do not stand on the X Rocker or exceed the 120kg weight limit via other means.• Do not lean back on the chair to the point in which the pedestal would li o the ground.• X Rocker armrests are designed for support and comfort during gameplay, please do not use these as support for geng in/out of the chair.• Playing audio for long periods at loud volumes may contribute to dicules in hearing.• Please be considerate to others when playing audio through the X Rocker speakers at higher volumes.
12Power Supply unit trademark: BI;Model name: B18-090200-I;Input: 100-240V~, 50/60 Hz, 0.8 A;Output: 9 VDC, 2A;ATTENTION:A. For Power Adapter, the apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus;B. For Power Adapter, the MAINS plug is used as the disconnect device, the disconnect device shall remain readily operable;C.Only use the attachments/accessories specified by manufacturer.
FCC NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna.-- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. ICThis device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas causer d'interférences, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. IC Radiation Exposure Statement:This equipment complies with Canada radiation exposure limits set forth for uncontrolled environments. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.Déclaration d’IC sur l’exposition aux radiations:Cet équipement est conforme aux limites d’exposition aux radiations définies par le Canada pour des environnements non contrôlés.Cet émetteur ne doit pas être installé au même endroit ni utilisé avec une autre antenne ou un autre émetteur. 7Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.Need Help? Email: service@acecasual.com Web: www.xrockernation.com Phone: 866-969-2603
Need Help? Email: Service@XRockerNaon.co.uk Phone: 01274 683 109 www.XRockerNaon.co.ukIMPORTANT: You must keep your original retail receipt as proof of purchase.

Navigation menu