ACE&EASTMAN Bas 342G Service Manual 342G_SV_cover1_07.08.28__E User
2016-10-15
User Manual: ACE&EASTMAN Bas-342G Service Manual
Open the PDF directly: View PDF
Page Count: 152 [warning: Documents this large are best viewed by clicking the View PDF Link!]
- SAFETY INSTRUCTIONS
- １. SPECIFICATIONS
- 2. FUNCTION SETTINGS
- 2-1. List of special functions when power is turned on
- 2-2. List of advanced functions
- 2-3. Memory switch setting method (Advanced)
- 2-4. List of memory switch settings
- 2-5. Stitch counter checking method
- 2-6. Error history checking method
- 2-7. Input checking method
- 2-8. Output checking method
- 2-9. Software version checking method
- 3. READING / WRITING DATA
- 3-1. Handling data
- 3-2. Notes on handling CF cards (sold separately)
- 3-3. Structure of a CF card folder
- 3-4. Data read/write mode
- 3-5. Reading sewing data from CF cards
- 3-6. Writing sewing data to CF cards
- 3-7. Reading memory switch data from CF cards
- 3-8. Writing memory switch data to CF cards
- 3-9. Reading user program data from CF cards
- 3-10. Writing user program data to CF cards
- 3-11. Updating the control program
- 3-12. Writing error log data to CF card
- 3-13. Reading sewing data from floppy disks
- 3-14. Writing sewing data to floppy disks
- 3-15. Reading extended option output data from a CF card
- 3-16. Writing extended option output data to CF cards
- 3-17. Reading extended option output data from floppy disks
- 4. MECHANICAL DESCRIPTIONS
- 4-1. Needle bar and thread take-up mechanisms
- 4-2. Lower shaft and shuttle race mechanisms
- 4-3. Work clamp lifter mechanism
- 4-4. Intermittent presser foot lifter mechanism
- 4-5. Intermittent presser foot stroke mechanism
- 4-6. Feed mechanism
- 4-7. Thread trimmer mechanism
- 4-8. Tension release mechanism
- 4-9. Thread wiper mechanism
- 5. DISASSEMBLY
- 5-1. Covers
- 5-2. Thread wiper mechanism
- 5-3. Work clamp arm mechanism
- 5-4. Intermittent presser foot lifter mechanism (1)
- 5-5. Needle bar mechanism
- 5-6. Upper shaft mechanism
- 5-7. Lower shaft mechanism
- 5-8. Feed covers
- 5-9. Feed mechanism
- 5-10. Work clamp lifter mechanism
- 5-11. Tension release mechanism
- 5-12. Intermittent presser foot lifter mechanism (2)
- 5-13. Thread trimmer mechanism
- 5-14. Shuttle hook mechanism
- 6. ASSEMBLY
- 6-1. Thread trimmer mechanism (1)
- 6-2. Intermittent presser foot lifter mechanism (1)
- 6-3. Tension release mechanism
- 6-4. Work clamp lifter mechanism
- 6-5. Feed mechanism
- 6-6. Feed covers
- 6-7. Upper shaft mechanism
- 6-8. Needle bar mechanism
- 6-9. Intermittent presser foot lifter mechanism (2)
- 6-10. Lower shaft mechanism
- 6-11. Shuttle hook mechanism
- 6-12. Thread trimmer mechanism (2)
- 6-13. Work clamp arm mechanism
- 6-14. Thread wiper mechanism
- 6-15. Covers
- 7. ADJUSTMENT
- 7-1. Checking the safety switch
- 7-2. Standard thread tension
- 7-3. Adjusting the needle bar height
- 7-4. Adjusting the needle bar lift amount
- 7-5. Adjusting the driver
- 7-6. Adjusting the needle clearance
- 7-7. Adjusting the shuttle race thread guide
- 7-8. Adjusting the rotary hook lubrication amount
- 7-9. Adjusting the position of the movable knife
- 7-10. Replacing the movable and fixed knives
- 7-11. Adjusting the thread wiper
- 7-12. Presser foot installation position
- 7-13. Changing the intermittent stroke
- 7-14. Adjusting the work clamp lift amount
- 7-15. Adjusting the air pressure
- 7-16. Adjusting the thread trimmer cam position
- 7-17. Belt tension adjustment
- 7-18. Adjusting the tension release amount
- 7-19. Adjusting the lower shaft gear backlash
- 7-20. Adjusting the home position
- 7-21. Adjusting the needle up stop home position
- 7-22. Adjusting the needle up stop position
- 8. ELECTRICAL MECHANISM
- 9. TABLE OF ERROR CODES
- 10. TROUBLESHOOTING
- 11. 7-SEGMENT DISPLAY