ADC Telecommunications PRSM074C FlexWave™ Prism - 40 Watt 700 Upper C - Band User Manual Prism Brochure

ADC Telecommunications Inc FlexWave™ Prism - 40 Watt 700 Upper C - Band Prism Brochure

Prism Brochure

FlexWave™ PrismFlexible Outdoor Wireless Coverage and Capacity
10/08 • 106969AE  FlexWave™ PrismFlexWave™ PrismFlexible Outdoor Wireless Coverage and Capacity2www.adc.com  •  +1-952-938-8080  •  1-800-366-3891OverviewWith the increasing popularity and reliance on wireless voice and data services, subscribers expect to have coverage at anytime, anywhere. In addition to increased wireless device usage, wireless service providers implementing 3G technologies have recognized a reduction in coverage patterns within existing coverage footprints, opening coverage “holes” within the network. To resolve this issue, it requires service providers to extend coverage and/or increase capacity within the non-coverage areas. This has been traditionally accomplished by adding new macro cell towers; however, with city centers becoming more congested and local government zoning regulations becoming more stringent, obtaining permits for new macro cell sites is becoming increasingly difficult. The Prism offers service providers a flexible, small form factor solution to extend coverage and capacity where needed, as well as support for the increasing number of protocols and frequencies available today and in the future.  Features and Benefits:Flexible Architecture • Supports multiple frequency bands and wireless protocols in one enclosure –Scalable and modular –Multiple non-contiguous segments of 1.5 to 75 MHz each –BTS interface supporting RF and OBSAI/CPRI standards (Future) –Transport rates supporting Dark Fiber and Millimeter Wave –Field upgradeable –User Friendly• Embedded element management system, supporting web based access and SNMP –Fully sealed, maintenance free electronics for harsh outdoor applications –Cost Effective• Efficient use of CAPEX equipment and real estate –FlexWave™ – ADC’s Next Generation of Wireless Solutions  for Improving Wireless Capacity, Coverage, Flexibility  and Customer RetentionADC’s FlexWave™ Prism is the most flexible, scalable and complete solution for addressing coverage and capacity needs for current and emerging wireless networks. The Prism improves wireless network coverage and capacity by extending services from existing cell sites, to hard-to-reach areas by distributing coverage from a centralized radio suite. Utilizing a centralized distributed architecture, service providers are able to recognize significant  CAPEX/OPEX savings through a shared Base Station Hotel (multiple BTS co-located together), as well as a shared Remote Radio Transceiver approach. The Prism’s flexibility and scalability offers service providers an optimal solution for multiple applications such as; dense urban centers, dense suburban areas, campuses, enterprise buildings, subways and tunnels. The Prism’s distributed architecture and small form factor allows service providers to cost-effectively increase coverage and capacity in these hard-to-reach areas.
10/08 • 106969AE  FlexWave™ PrismFlexWave™ PrismFlexible Outdoor Wireless Coverage and Capacity3www.adc.com  •  +1-952-938-8080  •  1-800-366-3891ApplicationThe FlexWave Prism uses patented digital-over-fiber technology to distribute RF to desired locations. The Prism digitizes the entire designated RF band and digitally transports it over dark fiber or millimeter wave links and reconstructs the signal at full bandwidth, regardless of modulation technology, at the remote location. ADC’s digital RF transport allows RF signals to be replicated at full dynamic range, independent of the link length, for improved data throughput. As service providers migrate to 3G and 4G networks, high-data rate broadband services, networks utilizing a Prism backbone will be ready.The Prism offers a flexible architecture to distribute wireless coverage and capacity. Its versatility and small form factor allow service providers to quickly deploy networks in areas where zoning restrictions often hinder installation of traditional macro cell towers and base stations. Centralization of base station capacity can also be realized using the FlexWave Prism. This allows service providers to further benefit by reducing capital expenditures and annual operating costs.System DescriptionThe FlexWave Prism is a flexible and cost effective solution for Distributed Antenna System applications: Microcell and/or CPRI/OBSAI Remote Radio Head applications:Next Generation DAS; optimized for multiple frequency bands, scalable RF bandwidth & transport rates• Flexible SeRF technology; serial RF processing, enabling scalable frequency bands and bandwidths• Digitial RF Transport; Digitally transports RF from the BTS to remote locations for distribution of RF signals.• Digital simulcast; signal is digitally combined and split to mulitple remotes• Future enhancements will include:CPRI/OBSAI; flexibility to support BTS interface standards• Microcell; fully contained capacity solution utilizing cost efficient low bit-rate IP backhaul• IP ready platform; smooth integration to IP front/backhaul networks• BaseStation 1BaseStation 2BaseStation 3OBSAI/CPRI toSeRF Converter RF to SeRF Converter RFRFRF to SeRF Converter SeRF BoardBackhaulDataMultiplexed SeRF over Fiber Multiplexed SeRF over mm-wave SeRF SeRFSeRF Multiband,   protocol-agnostic Universal Radio HeadMultiplexed SeRF over mm-wave OBSAI/CPRIHOSTREMOTESSample System Configuration (3 Band 3 Remote Simulcast)
10/08 • 106969AE  FlexWave™ PrismFlexWave™ PrismFlexible Outdoor Wireless Coverage and Capacity4www.adc.com  •  +1-952-938-8080  •  1-800-366-3891Host UnitThe rack-mountable FlexWave Prism Host Unit is typically located at a Base Station or a facility housing a suite of Base Stations. On the forward path, the Host Unit receives the RF signals from the BTS and digitizes the designated RF bands and digitally transports them over single mode fiber or a millimeter wave link to the Remote Units. On the reverse path, the Host Unit receives the digitized RF signals from the Remote Unit and converts them back to RF for the BTS. The Prism Host Unit is completely modular in design. Digital/Analog Radio Transceiver (DARTS) are hot swappable providing easy upgrades to addtional bands without interrupting existing service. The Prism Host Unit supports up to eight DART cards (supporting up to eight Remote Units) and  is capable of simulcasting signals up to as many as eight Remote Units. The Host Unit utilizes an embedded element management system for system configuration and network monitoring. The embedded EMS collects alarm information from both the Host and Remote Units. For multiple link deployments, multiple Host Units can be networked together at the same BTS site. In addition to sending alarm notifications to the Element Management System (EMS) through software, the Prism Host Unit also features front panel alarm reporting. LEDs on the front panel of the Host Unit will change color depending on the status of the unit. LED displays provide information regarding the following items:Power• System mode (active/standby)• Indicate unit fault condition• RF conditions• Host Unit
10/08 • 106969AE  FlexWave™ PrismFlexWave™ PrismFlexible Outdoor Wireless Coverage and Capacity5www.adc.com  •  +1-952-938-8080  •  1-800-366-3891Remote UnitsThe Prism Remote Units utilize a modular design, which supports up to four bands. Each Remote allows for future upgrades and easy field access.Typical mounting options for the Remote Unit include: pole-mount, inside pole-mount, wall-mount, and sub-terrain vault-mount.The electronics enclosure of the Prism Remote Unit is fully sealed IP-65 rated, which minimizes maintenance and is ideal for harsh environments. Fiber, antenna, and power input/output connectors are all sealed for maximum protection.On the forward path, the Remote Unit receives the digitized spectrum from the Host Unit and converts the spectrum back into RF to be distributed via an externally mounted antenna system. On the reverse path, the Remote Unit digitizes the designated RF spectrum and digitally transports it over single-mode fiber or MMW to the Host Unit. In addition to sending alarm notifications to the EMS software, the Prism Remote Unit also features LED alarm reporting. An LED on the bottom of the Remote Unit will illuminate upon a fault condition.Single Band Remote UnitDual Band Remote UnitTri Band Remote UnitQuad Band Remote Unit
10/08 • 106969AE  FlexWave™ PrismFlexWave™ PrismFlexible Outdoor Wireless Coverage and Capacity6www.adc.com  •  +1-952-938-8080  •  1-800-366-3891Alarm and Management SystemThe FlexWave Prism utilizes an embedded network management for system configuration and network monitoring. The Element Management System (EMS) utilizes a web based interface or SNMP protocol for easy accesses to the system.The EMS provides operational and maintenance capabilities for the Prism system (Host and Remote). The EMS can be used to set up and monitor status of any Host and any associated Remote Units. The EMS has the ability to configure the system, view status and parameter settings, download software, change parameters and monitor system performance and alarmsAccess and troubleshooting can also be accomplished on-site at either the Host Unit and/or the Remote Unit by utilizing a craft interface. Thus, allowing technicians the ability to plug-in a laptop and access all associated units connected to it.Host Site CapabilitiesThe EMS performs the following functions at the Host site:Provides real-time information regarding faults• Set up simulcast ratios• Digital timing delays• Displays various system level values (voltages, • RF, power, etc.)Records and generates history reports with • time and date stampsAdjusts performance related parameters of the • Host Unit and Remote UnitPermits placement of Host Unit and Remote • Unit into standby modeAllows download of new software versions to • the Host Unit and Remote UnitsNetwork Monitoring Capabilities The embedded EMS allows for remote alarm monitoring and network control of the Prism can also be performed from an off-site location or Network Operation Center (NOC). Communications to the NOC can be performed using the web based interface or SNMP protocol.The EMS performs the following functions at off-site locations such as the NOC:Provides real-time information regarding faults• Displays various system level values (voltages, RF, power, etc.)• Adjusts performance-related parameters of the Host Unit and Remote Unit• Permits placement of Host Unit and Remote Unit into standby mode• Access records and generates history reports with time and date stamps• Allows download of new software versions to the Host Unit and Remote Units•
10/08 • 106969AE  FlexWave™ PrismFlexWave™ PrismFlexible Outdoor Wireless Coverage and Capacity7www.adc.com  •  +1-952-938-8080  •  1-800-366-3891SpecificationsRF SPECIFICATIONS  Supported Frequency Blocks:  1-4 per Remote Unit; 1-8 per Host Unit  Bandwidth:  1.5 to 75 MHz non-contiguous  Frequency Band Supported:  Cell (850), ESMR, PCS (1900), AWS (2100), E-GSM, DCS (1800),  UMTS (2100)  Digital Simulcast:  Up to 8:1 Single Host (can daisy chain Host for higher simulcast)  Diversity Receive:  Yes (Optional)PROPAGATION DELAY  System Delay:  <5 dB typical, 6 dB max  Delay Management:  Digital (Manual or Automatic)NOISE FIGURE  Noise Figure:  <5 dB typical, 6 dB max  Input IP3:  >-8 dBm OPTICAL SPECIFICATIONS  Optical Budget:  26 dB  Digital Transport Rate:  3.072 GbpsOUTPUT POWER AT ANTENNA PORT (dBm)REMOTE UNIT ENVIRONMENTAL SPECIFICATIONS  Outside Ambient    Temp Rating:  -40°C to +50°C (-40ºF to +122ºF)  Storage Temperature:  -40°C to +70°C (-º40F to +158)  Humidity:  10% to 90% non-condensing  Lightning Protection:  20kA IEC 1000-45 8/30 µs WaveformREMOTE UNIT  Enclosure:  IP-65  Mounting:  Wall, Pole, Inside Pole, Strand, and Vault  Single Band    Dimensions (H x W x D):  23.1” x 12.15” x 10.125” (58.67 cm x 30.86 cm x 25.71 cm)    Volume:  1.56 ft3    Weight:  47 lbs. chasis, 64 lbs. total (21 kg chasis, 29 kg total)  Dual Band:    Dimensions (H x W x D):  31.1” x 12.15” x 10.125” (78.99 cm x 30.86 cm x 25.71 cm)    Volume:  2.10 ft3    Weight:  63 lbs. chasis, 96 lbs. total (28 kg chasis, 43 kg total)   Tri Band:    Dimensions (H x W x D):  39.1” x 12.15” x 10.125” (99.31 cm x 30.86 cm x 25.71 cm)    Volume:  2.64 ft3    Weight:  79 lbs. chasis, 127 lbs. total (36 kg chasis, 57 kg total)  Quad Band:    Dimensions (H x W x D):  50.2” x 12.15” x 10.125” (127.51 cm x 30.86 cm x 25.71 cm)    Volume: 3.40 ft3    Weight:  98 lbs. chasis, 163 lbs. total (44 kg chasis, 74 kg total)  Cooling:  Fan, IP-55  Optical Connectors:  Sealed ProaxFrequency Channels Number of RF Carriers1 2 4 8 16 CompositePower per Carrier CompositePower per Carrier CompositePower per Carrier CompositePower per Carrier CompositePower per CarrierCELL (850) 43.0 43.0 43.0 40.0 43.0 37.0 43.0 34.0 43.0 31.0ESMR 38.1 38.1 38.1 35.1 32.1 32.1 38.1 29.1 38.1 26.1PCS (1900) 43.0 43.0 43.0 40.0 43.0 37.0 43.0 34.0 43.0 31.0AWS (2100) 43.0 43.0 43.0 40.0 43.0 37.0 43.0 34.0 – –E-GSM 31.0 31.0 34.0 31.0 37.0 31.0 40.0 31.0 40.0 28.0DCS (1800) 32.8 32.8 35.8 32.8 38.1 32.8 41.8 32.8 41.8 29.8UMTS (2100) 42.5 42.5 42.5 39.5 42.5 36.5 42.5 33.5 – –
Website: www.adc.comFrom North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080 Fax: +1-952-917-3237 • For a listing of ADC’s global sales office locations, please refer to our website.ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota  USA  55440-1101Specifications published here are current as of the date of publication of this document. Because we are continuously improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may verify  product  specifications  by  contacting  our  headquarters  office  in  Minneapolis.  ADC  Telecommunications,  Inc. views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or features contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer106969AE  10/08  Original  ©  2008  ADC Telecommunications, Inc.  All Rights ReservedFlexWave™ prismSpecifications (con't)HOST UNIT        Mounting:  19-inch rack  Dimensions (H x W x D):  5.25" x 19" x 19" (13.34cm x  48.26 cm x 48.26) (3 RUs)  Weight:  <25 Pounds (<11 kg)REMOTE UNIT POWER REQUIREMENTS  Power Supply:  100-240 VAC, 50-60 Hz  Battery Backup:  Yes (optional external UPS)HOST UNIT POWER REQUIREMENTS  Power Source:  21 to 60 VDCELEMENT MANAGEMENT  Embedded EMS:  Yes  SNMP Based Management:  YesNote: Unless noted otherwise specications are typical and subject to change

Navigation menu