ADC Telecommunications PSM0802A FlexWave™ Prism - Cellular 20 Watt User Manual 3

Download:
Mirror Download [FCC.gov]
Document ID	1596523
Application ID	Ub5MADx2bMhNSaPkEFrCDA==
Document Description	Users Manual 3
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	172.38kB (2154744 bits)
Date Submitted	2011-12-06 00:00:00
Date Available	2011-12-06 00:00:00
Creation Date	2017-11-02 23:17:49
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-11-02 23:17:49
Document Title	ADC FlexWave Prism Element Management System 7.1 User Manual
Document Creator	FrameMaker 7.1
Document Author:	TE106558

Get I nform at ion
Viewing the Alarms Report
To access t he Current Alarms report , in t he Syst em Menu bar, click System Information
> Get Information, and t hen in t he Reports panel Type list , select Alarms.
The Current Alarms t able provides t he following inform at ion:
•
Severity—whet her alarm is classified as Maj or or Minor.
•
Ack’d—whet her
checkm ark.
•
Alarm Code—syst em - assigned alarm code. See “ Troubleshoot ing Alarm s” on
page 185 or use t he “ I ndex of Alarm s” on page 313 t o find t he page num ber
for a specific alarm descript ion, which includes t he alarm code.
•
Alarm Name—descript ive nam e of alarm .
•
Timestamp—dat e and t im e when t he alarm occurred ( YYYY:MM:DD:HH:MM:SS)
•
Unit Id—ident ifies t he unit wit hin t he syst em ; see “ Unit I dent ificat ion” on
page 43.
•
Unit Type—what t he unit is, such as Host or Rem ot e
•
Unit Name—nam e assigned t o t he unit
•
Module—t ype of m odule wit hin t he specified unit t hat is experiencing t he alarm
( SeRF, DART, Power Det ect or, SFP)
•
Module Name—user- assigned nam e for t he m odule t hat assist s in ident ifying
m odules when t roubleshoot ing
•
RF Band—t ype of passband provided by t he DART ( if applicable)
Page 110
© 2011 ADC Telecommunications, Inc
t he alarm
has been
acknowledged,
as indicat ed by
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Syst em I nform at ion
•
Extended Info—link t hat provides furt her inform at ion on t he alarm , including
t roubleshoot ing inform at ion.
IFEU + RAU Report
The IFEU + RAU report pert ains t o an I nt erReach Spect rum syst em and is not
applicable t o t his release.
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 111
© 2011 ADC Telecom m unicat ions, I nc.
Get I nform at ion
Viewing the All Report
The All Report consolidat es all available report s int o a single web page.
Page 112
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Syst em I nform at ion
Downloading a Report
CAUTION!
The All Report or Analog Units Report can take several minutes to download.
You can download t he report s t o your lapt op in Windows Excel form at .
Do t he following t o download a report t o your com put er:
I n t he Syst em Menu bar, click System Information > Get Information.
On t he Get Information page, in t he Reports panel Type list , select t he nam e of t he
report t hat you want t o download.
Click Download.
I n t he File Download window, click Save.
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 113
© 2011 ADC Telecom m unicat ions, I nc.
Get I nform at ion
I n t he Save As window, navigat e t o where you want t he report file saved, and
t hen click Save.
The file is saved as specified.
Page 114
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Syst em I nform at ion
Go t o t he direct ory where t he file was saved t o open t he file.
NOTE:
While Excel is often used to view this file, Excel uses characters such as hyphens and
slashes to create formulas. If discrepancies are seen in this report, use a text editor to
verify the report’s content.
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 115
© 2011 ADC Telecom m unicat ions, I nc.
Get Opt ics I nform at ion
GET OPTICS INFORMATION
The Get Optics Information page allows you t o view inform at ion on t he fiber.
To access t he Get Optics Information page, in t he Syst em Menu bar, click System
Information > Get Optics Information.
The Filter panel has t he following elem ent s:
•
View list —allows you t o select a filt er t o be applied t o t he page
•
contains box—allows you t o ent er filt er crit eria
•
Filter but t on—click t o apply t he filt er
The Get Optics Information t able has t he following elem ent s:
•
Unit Type—whet her t he unit is a Host or Rem ot e
•
Unit Name—user defined nam e of t he unit
•
SFP Number—syst em assigned num ber ( from 1 t o 8) for t he Opt ical port s
•
SFP Name—user ent ered port nam e or UNKNOWN_SFPNAME, which indicat es t hat a
nam e has not been ent ered.
•
Optics Type
– LongRange—26 dB
– IntermediateRange—18 dB) .
Page 116
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Syst em I nform at ion
•
Wavelength (nm)—num ber displayed is t he wavelengt h t ransm it t ed t hrough t his
port :
– Non- duplex and WDM configurat ions

1550 nm fwd

1310 nm rev
– CWDM configurat ions can be one of eight wavelengt hs:

1470 nm

1550 nm

1490 nm

1570 nm

1510 nm

1590 nm

1530 nm

1610 nm
•
Tx Power (dBm)—launch power level in dBm of forward pat h signal. The m inim um
FWD launch power is - 2 dBm , and t he m axim um is 3 dBm .
•
Rx Power (dBm)—Receive power level in dBm of reverse pat h signal, which
incorporat es t he launch power of t he Rem ot e Unit SFP plus all opt ical losses
( insert ion losses, fiber cable loss, and so fort h) .
•
Remote Name—nam e of t he Rem ot e connect ed t o t his Opt ics port .
•
Alarm Status—whet her an alarm is act ive. I f an alarm is act ive, t here will be a
Minor or Major link t hat you click t o open a dialog t hat defines t he act ive alarm ,
as described in “ Viewing Alarm Det ails” on page 45. The background color of
t he Alarm Status cell also indicat es t he alarm level ( see “ Alarm Color Codes” on
page 44) .
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 117
© 2011 ADC Telecom m unicat ions, I nc.
Get Logs
G ET L OGS
The Get Logs page allows you t o save com pressed t ar archive files of Prism logs.This
feat ure is prim arily used by ADC personnel when t roubleshoot ing a syst em .
However, you should know how t o creat e a log so you can em ail t he log t o ADC if
request ed t o do so.
To access t he Get Logs page, in t he Syst em Menu bar, click System Information >
Get Logs.
Click Get Logs.
I n t he File Download dialog, click Save.
Page 118
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Syst em I nform at ion
I n t he Save As dialog, navigat e t o where you want t o save t he log file.
Aft er a log has been creat ed, it is list ed as an Available Log in t he Get Logs page.
I n Windows, navigat e t o where you saved t he log zip file on your hard drive.
Double- click on t he t ar file t o access t he logs.
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 119
© 2011 ADC Telecom m unicat ions, I nc.
Get Logs
I nt ent ionally Blank Page
Page 120
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
SYSTEM MANAGEMENT
Topics
Page
Moving or Reconfiguring Fibers .............................................................................................. 122
Edit t he Propert ies of All Unit s in t he Syst em ........................................................................... 123
Reset All Unit s t o Fact ory Default ........................................................................................... 124
Backing Up a Syst em Configurat ion ........................................................................................ 126
Rest oring a Backed Up Syst em Configurat ion ........................................................................... 128
Perform Syst em Test ............................................................................................................ 131
Schedule Syst em Test .......................................................................................................... 135
Schedule Syst em Test s by Dat e and Tim e .......................................................................... 135
Disable a Scheduled Syst em Test ...................................................................................... 137
Set SNMP Trap Managers ...................................................................................................... 138
Adding an SNMP Trap Manager ......................................................................................... 139
Modifying an SNMP Trap Manager ..................................................................................... 141
Delet ing an SNMP Trap Manager ....................................................................................... 142
Set up SNMP ....................................................................................................................... 144
Act ivat e Opt ional Feat ures .................................................................................................... 145
The EMS views and param et ers discussed in t his sect ion affect t he ent ire Prism
syst em , as opposed t o affect ing an individual unit or m odule.
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 121
© 2011 ADC Telecommunications, Inc.
Moving or Reconfiguring Fibers
MOVING OR RECONFIGURING FIBERS
I f you need t o m ove or reconfigure fibers during t roubleshoot ing, follow t he st eps
below.
Move Host SFPs and fibers t o t heir new locat ions.
Do t he following if a previously filled SFP posit ion is now em pt y:
There will st ill be a GUI represent at ion of a Rem ot e on t hat SFP. To rem ove
t his ghost represent at ion, follow t he st eps in “ Clear All Disconnect Alarm s”
on page 184.
To delet e fiber and SFP alarm s at t ribut ed t o t he abandoned SFP posit ions,
follow t he st eps in “ Clear Current Alarm s” on page 170.
Com ple t e t h is st e p on ly for m ove d D ARTs n ow in a n a la r m e d st a t e . I f
t he configurat ion of a Rem ot e Unit DART originally connect ed t o an SFP does
not m at ch t he configurat ion of t he DART m oved t o t he SFP, t he new DART will
have an alarm st at e such as Module Missing Fault or DART Hardware Mismatch. I n t his
inst ance, follow t he st eps in “ Clearing DART Configurat ions” on page 161 t o
clear t he configurat ion of t he DART in t he alarm ed st at e.
Page 122
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Syst em Managem ent
E DIT THE P ROPERTIES OF A LL U NITS IN THE S YSTEM
The Edit Unit Properties page t hat is accessible t hrough t he Syst em Menu bar allows
you t o edit basic inform at ion and opt ionally provide not es for all t he unit s in t he
syst em at one t im e.
To access t he Edit Unit Properties page, in t he Syst em Menu bar, click System
Configuration > Edit Unit Properties.
The Edit Unit Properties page has t he following elem ent s, where each row in t he Edit
Unit Properties t able correspond t o t he unit ident ified in t he Unit Id colum n.
•
Unit Id colum n—ident ifies t he unit wit hin t he syst em ; see “ Unit I dent ificat ion”
on page 43.
•
Unit Name colum n—provides a t ext box t hat allows you t o ent er a unique nam e
for t he Host and each connect ed Rem ot e. Each Unit Name m ust st art wit h an
alphabet ical charact er, be bet ween 5 and 40 charact ers ( alphanum eric or
underscore only) , and cont ain no spaces.
•
IP Address colum n—t he I P address of t he unit
NOTE:
•
Contact Alarms colum n—ident ifies act ive cont act alarm s, if any. For inform at ion
on cont act alarm s, see any of t he following:
– “ Cont act Alarm s—Host Syst em Card” on page 201
–
•
An IP address of the type 169.254.x.y will only be communicable if the connected laptop also has
a 169.254.x.y address.
“ Cont act Alarm s—Rem ot e Unit ” on page 201
Notes colum n—provides a t ext box t hat allows you t o ent er not es specific t o t he
unit . You can ent er up t o 256 charact ers; all keyboard charact ers can be used.
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 123
© 2011 ADC Telecom m unicat ions, I nc.
Reset All Unit s t o Fact ory Default
R ESET A LL U NITS TO F ACTORY D EFAULT
This procedure reset s t he Host and all connect ed Rem ot e Unit s ( PRU or URU) t o
t heir fact ory default set t ings.
This procedure does not clear com m anded Out of Service and Band Lockout
set t ings ( see Table on page 42) .
Docum ent all configurat ion dat a, as everyt hing except user I Ds and I P
configurat ion will have t o be re- ent ered. To record t he current configurat ion:
Follow t he procedures in “ Viewing t he All Report ” on page 112 t o access t he
syst em configurat ion report s.
Follow t he procedures in “ Downloading a Report ” on page 113 t o download
t he syst em configurat ion report s t o a hard drive.
I n t he Syst em Tree, click on t he Host icon.
I n t he Unit Menu bar, click Unit Configuration > Edit Properties, t o open t he Unit
Configuration > Edit Properties page.
Click Reset all units to factory defaults.
I n t he confirm at ion dialog, click OK.
The syst em configurat ion is cleared, and you are logged out of your current
EMS session.
Page 124
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Syst em Managem ent
Log back int o t he EMS t o reconfigure t he syst em .
NOTE:
It may take a few minutes for the EMS to recognize the Host and connected remotes.
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 125
© 2011 ADC Telecom m unicat ions, I nc.
Backing Up a Syst em Configurat ion
B ACKING U P A S YSTEM C ONFIGURATION
The Backup page allows you t o backup t he syst em configurat ion. A backup file size
is t ypically less t han 1 MB, and a new backup overwrit es t he pre- exist ing backup.
You use t he backup file t o rest ore t he configurat ion as described in “ Rest oring a
Backed Up Syst em Configurat ion” on page 128.
Do t he following t o backup a syst em configurat ion:
I n t he Syst em Menu bar, click System
Configuration > Backup.
Click Backup. I f t he back up procedure fails,
t he following error m essage displays:
Failed to create Back Up. At t he end of a
successful backup,
a link
t o t he
downloaded file appears.
To download t he back- up file, click t he link
t hat appears, t he nam e for which is in t he form at of HOSTNAME_.tgz.
Only one file will be available.
Page 126
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Syst em Managem ent
I n t he File Download window, click Save.
I n t he Save As window, navigat e t o where you want t he backup file saved, and
t hen click Save.
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 127
© 2011 ADC Telecom m unicat ions, I nc.
Rest oring a Backed Up Syst em Configurat ion
R ESTORING A B ACKED U P S YSTEM C ONFIGURATION
CAUTION!
A System Restore can only occur if a previous system configuration has been backed up as
described in “Backing Up a System Configuration” on page 126.
CAUTION!
A system restore requires that you log back into the system. Once you click the Restore button, the
system will be unavailable for approximately two minutes. Perform this procedure during a
maintenance window.
NOTE:
A System Restore can only be performed by a user logged in as admin user or by a user with
Network Manager rights. A user assigned only Network User rights will not see the System Restore
node in the Function System Tree.
The System Restore page allows for a rest orat ion of a backed up syst em configurat ion,
as follows:
•
The Rest ore funct ion assum es t hat t he sam e or com parable replacem ent
hardware com ponent s are in place as when t he Backup funct ion occurred. I f
hardware com ponent changes have occurred, alarm s t hat point t o t he
differences will arise.
•
I f a Rem ot e has been added ( t hat is, was not part of t he original syst em
hardware set up) , t hen t he newly added Rem ot e will not be rest ored since it was
not present during t he syst em configurat ion backup.
D o t he follow in g t o r e st or e a syst e m ba ck up:
Make sure t here is sufficient disk space for t he backed up syst em configurat ion
t hat you want t o rest ore.
I n t he Syst em Menu bar, click System Configuration > Restore.
Click t he Browse but t on next t o t he File box t o browse t o t he locat ion of t he
backup file.
Page 128
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Syst em Managem ent
I n t he Choose File window, click on t he back- up file t o select it ( t he backup
filenam e is in t he form at of HOSTNAME_.tgz, and t hen click Open.
I n t he Restore page, wait for t he file nam e and pat h t o display in t he File box and
for t he ennoblem ent of t he Upload but t on, and t hen click Upload.
I n t he Restore page, wait for t he file upload m essage t o display and for t he
ennoblem ent of t he Upload and Restore but t ons, and t hen click Restore.
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 129
© 2011 ADC Telecom m unicat ions, I nc.
Rest oring a Backed Up Syst em Configurat ion
I n t he confirm at ion dialog, click OK.
St at us m essages display t o not ify you if t he rest orat ion failed or com plet ed
successfully.
Aft er a successful rest orat ion, you are logged out of t he syst em .
Log back in t o t he EMS t o cont inue m anagem ent act ivit ies.
Page 130
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Syst em Managem ent
PERFORM SYSTEM TEST
Syst em Test perform s an RF int egrit y check of t he syst em . Cert ain alarm s ( such
as t he RAU Antenna Disconnect alarm ) can only be set or cleared by running Syst em
Test .
CAUTION!
Running System Test (System Configuration > Perform System Test) with un-terminated Host
DARTs may cause a false RLM Upconvert Fault. Ensure that all Host DARTs are terminated before
running System Test.
CAUTION!
System Test interrupts RF transmission; System Test should therefore only be run during a normal
maintenance window.
CAUTION!
Do not make any software or hardware configuration changes during System Test, as changes
made during the test will make the test results unreliable.
I n t he Syst em Menu bar, click System Configuration > Perform System Test.
NOTE:
The table at the bottom of the Perform System Test page presents the results of the last
System Test, if any, as shown above.
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 131
© 2011 ADC Telecom m unicat ions, I nc.
Perform Syst em Test
I n t he Bands list , select t he passbands for which you want t o perform Syst em
Test . Only configured passbands will be list ed in t he Bands list .
I n t he DART list , select t he DART you want t o perform Syst em Test . Only t hose
DARTS t hat are available will be list ed in t he DART list .
CAUTION!
Regardless if only 1 DART or all DARTs are selected for System Test, System Test temporarily
shuts down the RF to all DARTs in the system.
Page 132
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Syst em Managem ent
Click Perform System Test. A System Test has started m essage displays.
This m essage should be followed by one of t hese m essages. You m ay need t o
click Refresh t o see t hese m essages.
•
System Test passed.
•
System Test failed.
•
System Test not available.
•
System Test passed – exceptions noted in log file.
Aft er a few seconds, t he Last Test Results panel updat es wit h a list of m aj or and
m inor alarm s wit h a corresponding t im est am p for when Syst em Test was run.
( Opt ional) Do t he following t o download t he result s of Syst em Test ( t o m ake
t he file available for lat er use, such as t roubleshoot ing) .
Click t he Click Here to Download link.
I n t he File Download dialog, click Save.
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 133
© 2011 ADC Telecom m unicat ions, I nc.
Perform Syst em Test
I n t he Save As dialog, navigat e t o where you want t o save t he file, and t hen
click Save.
The file is saved in Excel form at .
Page 134
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Syst em Managem ent
SCHEDULE SYSTEM TEST
You can schedule a Syst em Test t o run on a specific dat e and t im e, as described in:
•
“ Schedule Syst em Test s by Dat e and Tim e” on page 135
•
“ Disable a Scheduled Syst em Test ” on page 137
Schedule System Tests by Date and Time
CAUTION!
Running System Test (System Configuration > Perform System Test) with un-terminated Host
DARTs may cause a false RLM Upconvert Fault. Ensure that all Host DARTs are terminated before
running System Test.
CAUTION!
System Test interrupts RF transmission; System Test should therefore only be run during a normal
maintenance window.
CAUTION!
Do not make any software or hardware configuration changes during System Test, as changes
made during the test will make the test results unreliable.
Do t he following t o schedule a single or recurring Syst em Test :
I n t he Syst em Menu bar, click System Configuration > Schedule System Test.
Select Enable t o enable t he scheduled Syst em Test ( see also “ Disable a
Scheduled Syst em Test ” on page 137) .
I n t he Bands list , select t he band( s) t hat you want t o t est .
I n t he DART list , select t he DART( s) t hat you want t o t est .
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 135
© 2011 ADC Telecom m unicat ions, I nc.
Schedule Syst em Test
Click t he icon t o t he right of t he DATE box t o schedule on which dat e t he Syst em
Test will run. I f you ent er t he dat e m anually, use t he YYYY/MM/DD form at . For
exam ple, t o run a Syst em Test on 14 June 2011, ent er: 2011/06/14.
I n t he Time box, ent er t he t im e t hat t he Syst em Test is t o run. Use t he 24- hour
t im eclock form at of HH:MM:SS.
( Opt ional) Use t he Recurrence radio but t ons t o set up a recurring Syst em Test .
•
To have t he Syst em Test recurrence int erval be count ed by days, select t he
Day(s) (1-30) radio but t on, and t hen in t he corresponding box, ent er how
m any days should pass bet ween each occurrence of t his Syst em Test .
•
To have t he Syst em Test recurrence int erval be count ed by weeks, select
t he Week(s) (1-4) radio but t on, and t hen in t he corresponding box, ent er how
m any weeks should pass bet ween each occurrence of t his Syst em Test .
Click Apply.
NOTE:
If you leave either the DATE or TIME parameter empty and then click Apply, Schedule System Test
will not run. However, if you leave both the DATE and TIME parameters empty and then click Apply,
the System Test starts immediately.
The following exam ple has scheduled a Syst em Test for 850 Classic passbands
on 850 Classic DARTs inst alled in Host 1 t o occur on 2 April 2011 at 1: 00 AM.
This Syst em Test will occur in one- week int ervals.
Page 136
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Syst em Managem ent
Disable a Scheduled System Test
When you disable a scheduled Syst em Test , t he Bands, DART, Date, and Time set t ing
rem ain, but t he t est will not be run again unt il enabled.
I n t he Syst em Menu bar, click System Configuration > Schedule System Test.
Deselect Enable.
Click Apply.
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 137
© 2011 ADC Telecom m unicat ions, I nc.
Set SNMP Trap Managers
SET SNMP TRAP MANAGERS
The Set SNMP Trap Managers page allows you t o add, delet e, and m odify SNMP Trap
Managers.
The Registered Trap Manager t able, at t he t op of t he page, det ails any exist ing SNMP
Trap Managers, where:
•
Select radio but t on—allows you t o select an exist ing SNMP Trap Manager t o
m odify or delet e it .
•
IP Address—shows t he I P address of regist ered t rap m anagers
•
Port—shows t he port num ber for regist ered t rap m anagers
•
Community—shows t he Com m unit y password for regist ered t rap m anagers
•
Version—shows t he t rap version for regist ered t rap m anagers
I f a Trap Manager has not been creat ed, t he t able is em pt y:
Page 138
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Syst em Managem ent
Adding an SNMP Trap Manager
I n t he Syst em Menu bar, click System Configuration > Set SNMP Trap Managers.
I n t he Add New Trap Manager panel, do t he following:
I n t he IP Address box ent er t he I P address of t he device t hat you want t o add
as a t rap receiver. The address m ust be in t he xxx.xxx.xxx.xxx form at .
I n t he Port box, ent er t he port on t he device t hat will receive t he t raps. The
norm al and recom m ended SNMP Trap port is 162.
I n t he Community box, ent er a password t hat will allow access t o t he device.
The Community password m ust be bet ween 6 and 20 alphanum eric charact ers
( usually public or private) .
I n t he Version list , select t he t rap version for t he SNMP Trap Manager t hat
you are regist ering ( V1 or V2c) .
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 139
© 2011 ADC Telecom m unicat ions, I nc.
Set SNMP Trap Managers
Click Add.
The Registered Trap Managers t able updat es wit h t he new SNMP Trap Manager.
Page 140
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Syst em Managem ent
Modifying an SNMP Trap Manager
I n t he Syst em Menu bar, click System Configuration > Set SNMP Trap Managers. The
Registered Trap Managers t able list s exist ing SNMP Trap Managers.
I n t he Registered Trap Managers t able, select t he t rap m anager t hat you want t o
m odify.
I n t he Add New Trap Manager
panel, do any of t he following:
•
I n t he IP Address box ent er a
new
I P address.
The
address m ust be in t he
xxx.xxx.xxx.xxx form at .
•
I n t he Port box, ent er t he
port on t he device t hat will
receive t he t raps. The
norm al and recom m ended
SNMP t rap port is 162.
•
I n t he Community box, ent er
a password t hat allows
access
to
t he
device
( usually public or privat e) .
The Com m unit y password
is lim it ed t o 20 charact ers.
•
I n t he Version list , select t he t rap version for t he SNMP Trap Manager t hat
you are regist ering.
Click Modify.
The Registered Trap Managers t able
updat es wit h t he m odified
SNMP Trap Manager.
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 141
© 2011 ADC Telecom m unicat ions, I nc.
Set SNMP Trap Managers
Deleting an SNMP Trap Manager
I n t he Syst em Menu bar, click System Configuration > Set SNMP Trap Managers. The
Registered Trap Managers t able list s exist ing SNMP Trap Managers.
I n t he Registered Trap Managers t able, select t he t rap m anager t hat you want t o
delet e.
Click Delete.
I n t he confirm at ion window, click OK.
Page 142
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Syst em Managem ent
The delet ed SNMP Trap Manager is rem oved from t he Registered Trap Managers
t able and will no longer receive t raps.
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 143
© 2011 ADC Telecom m unicat ions, I nc.
Set up SNMP
SETUP SNMP
To access t he Setup SNMP page, in t he Syst em Menu bar, click System Configuration
> Setup SNMP.
I n t he SNMP V1 Agent Override panel, do t he following.
I n t he Mode list , select t he SNMP V1 Agent Override m ode:
•
Enabled
•
Disabled
I n t he Address box, ent er t he SNMP V1 Agent Override address. I f t he SNMP
Agent Override Mode is not Disabled, t he syst em uses t his address as t he
source address in t he t raps.
I n t he SNMP Port Number box, ent er t he SNMP port num ber for sets and gets.
Click Apply t o m odify t he SNMP set t ings.
Page 144
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Syst em Managem ent
A CTIVATE O PTIONAL F EATURES
The Activate Optional Features page allows you t o act ivat e opt ional feat ures available
in t he syst em t hat are purchased aft er t he Host Unit has been shipped.
NOTE:
Activation Codes are supplied by ADC Technical Assistance (see “Appendix C: Contacting ADC/TE
Connectivity” on page 297).
To access t he Activate Optional Features page, in t he Syst em Menu bar, click System
Configuration > Activate Optional Features.
I n t he Activation Code box t hat corresponds t o t he feat ure t hat you want t o
act ivat e, ent er t he act ivat ion code provided by ADC.
Click Activate. The following Information m essage displays.
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 145
© 2011 ADC Telecom m unicat ions, I nc.
Act ivat e Opt ional Feat ures
I nt ent ionally Blank Page
Page 146
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
MANAGING UNITS
Topics
Page
Basic Unit Views .................................................................................................................. 148
View Opt ical Port s ................................................................................................................ 149
Viewing DARTs .................................................................................................................... 151
Viewing Net work St at ist ics .................................................................................................... 152
Edit ing Unit Propert ies .......................................................................................................... 153
Configuring Opt ical Port s....................................................................................................... 153
Viewing t he St at us of t he Host Unit ........................................................................................ 154
Viewing t he St at us of a Rem ot e Unit ....................................................................................... 156
Module St at us Table ....................................................................................................... 156
DART St at us Table .................................................................................................... 157
LNA St at us Table ...................................................................................................... 158
LPA St at us Table....................................................................................................... 158
PD St at us Table ........................................................................................................ 159
Opt ical St at us Table ........................................................................................................ 159
Rem ot e St at us Table....................................................................................................... 160
Rem ot e Unit Capacit y and Tem perat ure ............................................................................. 160
Clearing DART Configurat ions ................................................................................................ 161
Set t he Capacit y for a New Rem ot e Unit RSI Board ................................................................... 162
Using t he EMS GUI t o Change t he Rem ot e Unit Capacit y ...................................................... 162
Using Telnet or ssh t o Change t he Rem ot e Unit Capacit y ...................................................... 163
Reboot ing a Unit .................................................................................................................. 164
Reset t ing an LPA.................................................................................................................. 165
This sect ion describes t he Prism EMS param et ers whose set t ings affect t he
individual unit s wit hin a Prism syst em .
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 147
© 2011 ADC Telecommunications, Inc.
Basic Unit Views
BASIC UNIT VIEWS
When you click on a device icon in t he Syst em Tree, t he following view opens in
t he EMS View Fram e, in which t here are t hree places where t he select ed device is
ident ified. Not ice also t he indicat ors for act ive alarm s. I n t his inst ance t he alarm
overlays on t he Host and Rem ot e Unit icons indicat e t hat an alarm is act ive on
each device, and t he Alarm Count er shows t he count of act ive alarm s.
The following graphic ident ifies t he com ponent s in a basic unit view.
Unit identifiers in
System Tree
(by Unit Name and Unit ID)
Alarm Counter
(system wide)
Unit identifier
(by Unit Name)
Host icon with
Minor alarm overlay
Remote Unit icon with
Major alarm overlay
Unit identifier
(by Unit Name)
Figure 22. Overview of Components in a Basic Unit View
The Unit view provides t he following inform at ion:
•
Name—user- defined or syst em nam e of t he select ed unit .
•
Unit Type—t he t ype of device t hat t he select ed unit is:
– Host
– PRU—Prism Rem ot e Unit
– URU—URH Rem ot e Unit
•
Alarm—highest level of alarm occurring on t he select ed unit . Not ice t hat in t his
exam ple, t he Alarm indicat ors show t hat t here are four Minor alarm s act ive on
t his syst em . The Unit view let s you know t hat at least one of t he alarm s is
act ive on t he Host .
•
Temperature—int ernal t em perat ure of t he select ed unit .
•
Notes—t ext box t hat allows you t o ent er not es specific t o t he select ed unit . You
can ent er up t o 256 charact ers; all keyboard charact ers can be used.
Page 148
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Managing Unit s
VIEW OPTICAL PORTS
The View Optical Ports page shows t he current usage and alarm st at us of t he opt ical
port s on a Host or a PRU/ URU plus t he current values of key operat ing param et ers.
The Host and PRU/ URU chassis have eight opt ical port s, but t he View Optical Ports
page only shows act ive port s ( t hose physically connect ed t o a Host or PRU/ URU) .
Each port in t he page represent s one set of forward and reverse pat hs bet ween a
Host and Rem ot e.
I n t he Syst em Tree, click on an icon for a Host or Rem ot e Unit .
I n t he Unit Menu bar, click Unit Information > View Optical Ports.
The View Optical Ports t able has t he following com ponent s:
•
SFP Number—Syst em assigned port num ber.
•
SFP Name—user ent ered port nam e or UNKNOWN_SFPNAME, which indicat es t hat
no nam e has been ent ered.
•
In/Out—used for cascading, which is not support ed in t his release. The Host will
t herefore always be set as Out ( indicat es t hat t he forward link for t he connect ed
SFP is going away from t he Host ) and t he SFPs for all Rem ot e Unit s will always
be set as In.
•
Optics Type
– LongRange—26 dB
– IntermediateRange—18 dB.
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 149
© 2011 ADC Telecom m unicat ions, I nc.
View Opt ical Port s
•
Wavelength (nm)—wave lengt h t ransm it t ed t hrough t his port :
– Non- duplex and WDM configurat ions: 1550 nm fwd or 1310 nm rev
– CWDM configurat ions can be one of eight wavelengt hs:

1470 nm

1510 nm

1550 nm

1590 nm

1490 nm

1530 nm

1570 nm

1610 nm
•
Tx Power (dBm)—launch power level in dBm of forward pat h signal. The m inim um
FWD launch power is - 2 dBm , and t he m axim um is 3 dBm .
•
Rx Power (dBm)—receive power level in dBm of reverse pat h signal, which
incorporat es t he launch power of t he Rem ot e Unit SFP plus all opt ical losses
( insert ion losses, fiber cable loss, and so fort h) .
•
Host Name/Remote Name—dependent on t he unit select ed in St ep 1 on page 149:
– I f a Host Unit was select ed, t hen t he colum n is labeled Remote Name and t he
dat a in t he colum n pert ains t o t he Rem ot e connect ed t o t his Opt ical port
ident ified in SFP Number and SFP Name.
– I f a Rem ot e Unit was select ed, t hen t he colum n is labeled Host Name and t he
dat a in t he colum n pert ains t o t he Host ( for select ed PRU/ URU) connect ed
t o t his Opt ical port ident ified in SFP Number and SFP Name.
•
Alarm Status—whet her an alarm is act ive. I f an alarm is act ive, t here will be a
Minor or Major link t hat you click t o open a dialog t hat defines t he act ive alarm ,
as described in “ Viewing Alarm Det ails” on page 45. The background color of
t he Alarm Status cell also indicat es t he alarm level ( see “ Alarm Color Codes” on
page 44) .
Page 150
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Managing Unit s
VIEWING DARTS
I n t he Syst em Tree, click on t he icon of t he Host or PRU/ URU for which you
want t o view inform at ion on it s DARTs.
I n t he Unit Menu bar, click Unit Information > View DARTs t o open t he View DARTs
page.
The t able in t he View DARTs page provides t he following inform at ion:
•
DART Number—ident ifies any inst alled DARTs by t he slot num ber in which it is
inst alled in t he Host or PRU/ URU chassis
•
DART Name—syst em or user- assigned nam e; default is UNKNOWN_DARTNAME.
•
Band Type—which DART m odel is inst alled, and t he band t ype t hat it is
providing
•
Passband—t ype of passband
•
Alarm Status—whet her an alarm is act ive. I f an alarm is act ive, t here will be
a Minor or Major link t hat you click t o open a dialog t hat defines t he act ive
alarm , as described in “ Viewing Alarm Det ails” on page 45. The background
color of t he Alarm Status cell also indicat es t he alarm level ( see “ Alarm Color
Codes” on page 44) .
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 151
© 2011 ADC Telecom m unicat ions, I nc.
Viewing Net work St at ist ics
VIEWING NETWORK STATISTICS
I n t he Syst em Tree, click on an icon for a Host or Rem ot e Unit .
I n t he Unit Menu bar, click Unit Information > View Network Statistics t o open t he View
Network Statistics page.
The View Network Statistics t able has t he following com ponent s:
•
Port—I dent ifies t he port s in t he net work.
•
Rx Bytes—Receive byt e count er t hat increm ent s by t he byt e count of fram es
received, including t hose in bad packet s, excluding pream ble and SFD but
including FCS byt es.
•
Rx Packets—Receive packet count er t hat increm ent s for each fram e received
packet ( including bad packet s, all unicast , broadcast , and m ult icast packet s) .
•
RX FCS Errors—Receive FCS error count er t hat increm ent s for each fram e
received t hat has an int egral 64 t o 1518 lengt h and cont ains a fram e check
sequence error.
•
Rx Broadcast Pkts—Receive broadcast packet count er t hat increm ent s for each
broadcast good fram e of lengt hs 64 t o 1518 ( non VLAN) or 1522 ( VLAN) ,
excluding m ult icast fram es. Does not include range/ lengt h errors.
•
Rx Multicast Pkts—Receive m ult icast packet count er t hat increm ent s for each
m ult icast good fram e of lengt hs 64 t o 1518 ( non VLAN) or 1522 ( VLAN) ,
excluding broadcast fram es. This count does not include range/ lengt h errors.
•
Rx Fragmented Frames—Receive fragm ent s count er t hat increm ent s for each fram e
received t hat cont ains an invalid FCS and is less t han 64 byt es. This includes
int egral and non- int egral lengt hs.
•
Rx Jabber Frames—Receive j abber count er t hat increm ent s for fram es received
t hat exceed 1518 ( non VLAN) or 1522 ( VLAN) byt es and cont ain an invalid FCS.
This includes alignm ent errors.
Page 152
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Managing Unit s
•
Tx Byte Counter—Transm it byt e count er t hat increm ent s by t he num ber of byt es
t hat were put on t he wire including fragm ent s of fram es t hat were involved
wit h collisions. This count does not include pream ble/ SFD or j am byt es. This
count er does not count if t he fram e is t runcat ed.
•
Tx Pkt Counter—Transm it packet count er t hat increm ent s for each t ransm it t ed
packet ( including bad packet s, excessive deferred packet s, excessive collision
packet s, lat e collision packet s, all unicast , broadcast , and m ult icast packet s) .
•
Tx Broadcast Pkts—Transm it broadcast packet count er t hat increm ent s for each
broadcast fram e t ransm it t ed ( excluding m ult icast fram es) .
•
Tx Multicast Pkts—Transm it m ult icast packet count er t hat increm ent s for each
m ult icast valid fram e t ransm it t ed ( excluding broadcast fram es) .
•
Reset Counter but t on—click t o clear t he st at ist ics in t he Network Statistics page.
EDITING UNIT PROPERTIES
Unit propert ies are set during init ial set up, but can be changed at any t im e. See
one of t he following:
•
“ Configure Basic Host Unit Propert ies” on page 64
•
“ Label t he PRU/ URU” on page 66.
CONFIGURING OPTICAL PORTS
Opt ical port configurat ions are set during init ial set up, but can be changed at any
t im e. See one of t he following:
•
See “ Label t he Host Opt ical Port s” on page 67.
•
See “ Label PRU/ URU Opt ical Port s” on page 70.
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 153
© 2011 ADC Telecom m unicat ions, I nc.
View ing t he St at us of t he Host Unit
VIEWING THE STATUS OF THE HOST UNIT
I n t he Syst em Tree, click on t he Host icon.
I n t he Unit Menu bar, click Unit Information > View Status.
The Unit Information > View Status page provides t he following inform at ion for t he
select ed Host . The background of each t able cell is color coded t o t he level of t he
alarm ; see “ Viewing Param et ers and Alarm s” on page 44. For furt her inform at ion
on t hese fault s and alarm s, see “ Troubleshoot ing Alarm s” on page 185.
•
Module Status t able—provides st at us inform at ion for inst alled DARTs, where
colum ns 1 t hrough 8 correspond t o t he slot in which t he DART resides ( Colum n
1 = Slot 1, and so fort h) . I f a DART colum n has no background color, a DART
is not inst alled in t hat slot .
– DART Fault—Sum m ary of DART Downconvert er 1 Synt hesizer Unlocked,
Downconvert er 2 Synt hesizer Unlocked, Upconvert er Synt hesizer Unlocked,
DC Supply Fault alarm s, and DART FPGA st at us.
– DART Over Drive Fault—Red indicat es t hat t he RF signal received from t he
BTS/ BDA is t oo st rong. Fault t hreshold is + 19 dBm .
– DART Under Drive Fault—DART forward RF input signal below t he norm al
operat ing lim it . Fault t hreshold is + 5 - Fwd Gain - 20
– Module Missing Fault—One of t he Host pluggable m odules is m issing
( DART/ SFP) .
– DART Hardware Mismatch—Host DART does not support t he select ed passband.
Fault occurs when a Host DART is replaced wit h anot her DART of t he
incorrect t ype.
•
Optical Status t able—shows t he current usage and alarm st at us of t he opt ical
port s on t he Host plus t he current values of som e key operat ing param et ers.
Page 154
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Managing Unit s
The Host has eight opt ical port s, but t he Optical Status t able only shows act ive
port s ( physically connect ed t o a Rem ot e) . Each port in t he t able ( where SFP 1
is colum n 1, SFP 2 is colum n 2, and so fort h) represent s one set of forward and
reverse pat hs bet ween a Host and Rem ot e. Physically, t his m ay have been
accom plished wit h a dual- connect or t hrough t hat port . Each physical port
cont ains an SFP t ransceiver wit h t wo connect ors.
The Optical Status t able only shows t he Receive power level from t he Rem ot e Unit
( REV pat h) . To see t he Receive power level in t he FWD pat h ( from t he Host t o
t he Rem ot e) , you m ust open t he Unit Information > View Status page for t he desired
Rem ot e as described in “ Viewing t he St at us of a Rem ot e Unit ” on page 156.
– Optical RX High BER—High bit error rat e ( BER) det ect ed by fiber opt ic receiver.
Fault t hreshold is 0.00001. Threshold cannot be changed.
– Optical RX No Light—No signal det ect ed by opt ical receiver.
– Optical Transmitter Fault—SFP opt ical t ransm it t er failed.
– Optical Over Drive—SFP opt ical receive input power above specificat ion. The
fault t hreshold cannot be changed, and is

1 dBm for I R

-9 dBm for LR.
– Optical Under Drive—SFP opt ical receive input power below specificat ion. The
fault t hreshold cannot be changed, and is

-18 dBm for I R

-27 dBm for LR.
– Module Missing Fault—One of t he Host SFPs is m issing.
•
Host Status t able—shows t he current overall st at us of t he Host .
– Host Major Contact Alarm Output Active—Maj or Cont act Alarm Out put act ive.
– Host Minor Contact Alarm Output Active—Minor Cont act Alarm Out put act ive.
– Remote Major Contact Alarm Output Active—Red indicat es NO/ NC m aj or alarm
cont act s are in an alarm posit ion. These connect ions are t ypically wired t o
a local alarm alert syst em . This st at us indicat or is red when a m aj or alarm
is present on any Rem ot e connect ed t o t he Host .
– Remote Minor Contact Alarm Output Active—Yellow indicat es t hat NO/ NC m inor
alarm cont act s are in an alarm posit ion. These connect ions are t ypically
wired t o a local alarm alert syst em . This st at us indicat or is yellow when a
m inor alarm is present on any Rem ot e connect ed t o Host .
– SeRF Fault—st at e of t he SeRF. Red indicat es t hat eit her t he SeRF clock source
is unaccept able or t he SeRF card FPGA is not program m ed.
– Fan Fault—st at e of t he Host chassis fan. Red indicat es t hat t he Host chassis
fan is spinning t oo slowly.
– Temperature High—Red indicat es t hat t he current t em perat ure of t he Host
int erior is above it s operat ing lim it s. Fault t hreshold is 62° C.
– Temperature Low—Yellow indicat es t hat t he current t em perat ure of t he Host
int erior is below it s operat ing lim it s. Fault t hreshold is 0° C.
•
Temperature—Gives t he current t em perat ure of t he Host chassis int erior in
degrees Cent igrade, as det ect ed by t he Host .
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 155
© 2011 ADC Telecom m unicat ions, I nc.
Viewing t he St at us of a Rem ot e Unit
VIEWING THE STATUS OF A REMOTE UNIT
For furt her inform at ion on t he fault s list ed in t he View St at us page for Rem ot e
Unit s, see “ Troubleshoot ing Alarm s” on page 185.
I n t he Syst em Tree, click on t he icon of t he PRU/ URU for which you want t o
view it s st at us.
I n t he Unit Menu bar, click Unit Information > View Status.
The Unit Information > View Status page provides t he following inform at ion for t he
select ed Rem ot e Unit . The background of each t able cell is color coded t o t he level
of t he alarm ; see “ Viewing Param et ers and Alarm s” on page 44. For m ore
inform at ion on t he fault s and alarm s, see “ Troubleshoot ing Alarm s” on page 185.
Module Status Table
The Module Status t able provides st at us inform at ion for PRU/ URU m odules where
colum ns 1 t hrough 8 correspond t o t he slot in which a DART resides ( see “ RF
Module Capabilit ies and GUI Represent at ion” on page 21) .
The following sect ions describe t he different sect ions wit hin t he Module Status t able.
Page 156
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Managing Unit s
DART Status Table
The DART Status t able
present s st at us of t he
DARTs in a Rem ot e Unit .
There can be bet ween 1
and 8 DARTs inst alled in a
Rem ot e Unit . I f a DART
colum n has no background
color, a DART is not
inst alled in t hat slot , as
shown below.
The DART Status t able has t he following elem ent s.
•
DART Fault—Sum m ary of DART Downconvert er 1 Synt hesizer Unlocked,
Downconvert er 2 Synt hesizer Unlocked, Upconvert er Synt hesizer Unlocked,
DC Supply Fault alarm s, and DART FPGA st at us.
•
DART DC Supply Fault—DART Module DC supply volt ages out side specificat ion.
•
DART Hardware Mismatch—Host DART does not support t he select ed passband.
Fault occurs when a Host DART is replaced wit h anot her DART of t he incorrect
t ype.
•
DART Temperature High—DART t em perat ure above operat ing lim it . Threshold is
85° C.
•
Delay Out Of Range—PRU/ URU delay set t ings out side t he valid range.
•
DART Temperature Low—DART t em perat ure below operat ing lim it . Threshold is
- 40° C.
•
Module Missing Fault—DART m odule is m issing.
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 157
© 2011 ADC Telecom m unicat ions, I nc.
Viewing t he St at us of a Rem ot e Unit
LNA Status Table
The LNA Status t able present s st at us inform at ion for t he Low Noise Am plifiers in a
Rem ot e Unit . There can be bet ween 1 and 8 LNAs inst alled in a Prism Rem ot e Unit .
•
LNA Power Fault—PRU/ URU Low Noise Am plifier Power fault .
•
Module Missing Fault—LNA m odule is m issing.
LPA Status Table
The LPA Status t able
present s st at us
inform at ion for t he
Linear Power Am plifiers
in a Rem ot e Unit . There
can be bet ween 1 and 4
LPAs inst alled in a Prism
Rem ot e Unit .
•
LPA Disabled—PRU/ URU Linear Power Am plifier ( LPA) disabled due t o an
int ernally det ect ed problem . ( VSWR, DC, Loop Fault , Low Power, or
Tem perat ure High alarm ) .
•
LPA VSWR Fault—PRU/ URU Linear Power Am plifier ( LPA) VSWR fault .
•
LPA DC Fault—PRU/ URU Linear Power Am plifier ( LPA) DC fault .
•
LPA Loop Fault—PRU/ URU Linear Power Am plifier ( LPA) Loop fault .
•
LPA Over Power—PRU/ URU Linear Power Am plifier ( LPA) out put power level above
operat ing lim it .
•
LPA Low Power Fault—I nt ernal Linear Power Am plifier ( LPA) Low Power fault . Gain
of one or m ore int ernal am plifiers out side of specificat ion) .
•
LPA Missing—LPA m odule is m issing.
•
LPA Over Temperature—PRU/ URU LPA above operat ing lim it .
Page 158
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Managing Unit s
PD Status Table
The PD Status t able
present s st at us
inform at ion for t he Power
Det ect or in a Rem ot e
Unit . There can be
bet ween 1 and 4 PDs
inst alled in a Prism
Rem ot e Unit .
•
System VSWR Fault—PRU/ URU VSWR m easurem ent above specificat ion.
•
RF Power Low—PRU/ URU RF Out put Power below m inim um t hreshold.
•
Module Missing Fault—Power Det ect or m odule is m issing.
•
Duplexer Mismatch—Configured frequency range not support ed by Duplexer.
Optical Status Table
The Optical Status t able
provides st at us
inform at ion for SFPs
inst alled in a Rem ot e
Unit ( PRU/ URU) .There
can be bet ween 1 and 8
SFPs inst alled in a
Rem ot e Unit . I f a
colum n has no
background color, an
SFP is not inst alled in
t hat slot .
•
Optical RX High BER—High bit error rat e ( BER) det ect ed by fiber opt ic receiver.
Threshold is 0.00001.
•
Optical RX No Light—No signal det ect ed by opt ical receiver.
•
Optical Transmitter Fault—SFP opt ical t ransm it t er failed.
•
Optical Over Drive—SFP opt ical
Thresholds are as follows:
– 1 dBm for I R
– -9 dBm for LR.
input
power
above
specificat ion.
•
Optical Under Drive—SFP opt ical receive input
Thresholds are as follows:
– -18 dBm for I R
– -27 dBm for LR.
power
below
specificat ion.
•
Module Missing Fault—SFP m odule is m issing.
receive
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 159
© 2011 ADC Telecom m unicat ions, I nc.
Viewing t he St at us of a Rem ot e Unit
Remote Status Table
The Remote Status t able provides general st at us inform at ion for a Rem ot e Unit
( PRU/ URU) .
•
Host Lost—Host is not com m unicat ing wit h
PRU/ URU.
•
AC Power Supply Fault—Power supply is in a
failed st at e, or t he AC power is below t he
m inim um required volt age.
•
Temperature High—Tem perat ure above
operat ing lim it . Threshold is 95° C.
•
Temperature Low—Tem perat ure below
operat ing lim it . Threshold is Minus 40° C.
•
Contact Alarm Input 1 Active—Host Cont act
Alarm I nput # 1 act ive.
•
Fan Under Speed—Fans operat ing below
expect ed RPM.
•
Contact Alarm Input 2 Active—Host Cont act
Alarm I nput # 2 act ive.
•
Fan Over Speed—Fans operat ing above
expect ed RPM.
•
Door Open—Door open on PRU.
•
SeRF Fault—Sum m ary of SeRF Synt hesizer Unlocked alarm and SeRF FPGA
st at us.
•
Software Version Mismatch Fault—Soft ware version on t he Host and Rem ot e Unit s do
not m at ch.
Remote Unit Capacity and Temperature
The Unit Information > View Status page for Rem ot e Unit s also provides unit capacit y
and t em perat ure inform at ion for t he select ed Rem ot e Unit ( PRU/ URU) .
•
Capacity—t he num ber of RF groups available t o t he Rem ot e Unit .
•
Temperature—The int ernal Tem perat ure of t he select ed unit .
Page 160
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Managing Unit s
CLEARING DART CONFIGURATIONS
This procedure does t he following:
•
reset s t he gain
•
reset s t he DART nam e
•
clears all links
•
clears t he passband
•
clears all associat ed alarm s
I n t he Syst em Tree, click on an icon for a Host or Rem ot e Unit .
I n t he Unit Menu bar, click Unit Configuration > Clear DART Configuration, t o open t he
Clear DART Configuration page.
I n t he Select colum n, select t he DART( s) for which you want t o clear
configurat ion.
Click Clear Configuration.
I n t he confirm at ion window, click OK.
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 161
© 2011 ADC Telecom m unicat ions, I nc.
Set t he Capacit y for a New Rem ot e Unit RSI Board
I f t he DART has been rem oved from t he Host or PRU/ URU chassis, t hen t he
ent ire DART ent ry disappears. I f t he DART is st ill present in t he Host or
PRU/ URU chassis, t hen t he DART Name and Passband is reset t o default .
SET THE CAPACITY FOR A NEW REMOTE UNIT RSI BOARD
The Capacity set t ing in t he Edit Properties page pert ains t o t he PRU/ URU Rem ot e SeRF
I nt erface ( RSI ) board and t he num ber of RF groups available t o t he Rem ot e Unit .
This param et er is set during m anufact uring and should be changed only when t he
RSI board has been replaced.
Using the EMS GUI to Change the Remote Unit Capacity
The Capacity set t ing can be changed by logging ont o t he EMS t hrough t he Rem ot e
Craft port .
Open t he unit and connect your lapt op t o t he Craft port on t he SeRF.
Login t o t he EMS, using t he following param et ers:
•
I P address is 192.168.0.1
•
User Nam e is operator
•
Password is operator
Page 162
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Managing Unit s
I n t he Syst em Tree, click t he icon of t he PRU/ URU whose propert ies you want
t o change.
I n t he Unit Menu bar, click Unit Configuration > Edit Properties, t o open t he Unit
Configuration > Edit Properties page for t he select ed PRU.
I n t he Capacity list , set t he Capacity of t he new RSI board:
•
For all RSI boards inst alled in a URH, Capacity should always be set t o 3.
•
For an RSI board inst alled in a PRU, Capacity can be 1, 2, 3, or 4 and indicat es
t he num ber of RF Modules inst alled in t he PRU.
Click Apply.
Using Telnet or ssh to Change the Remote Unit Capacity
Alt ernat ely, t he capacit y can be changed using Telnet or ssh.
Access t he Edit Unit Propert ies page t o det erm ine t he I P address for t he Host
and Rem ot e Unit ( s) . I n t he Syst em Menu bar, click System Configuration > Edit Unit
Properties. Each row in t he Edit Unit Properties t able correspond t o t he unit
ident ified in t he Unit Id colum n. Use t he IP Address colum n t o det erm ine t he I P
address for each unit .
Login t o t he Host using telnet or ssh.
From t he Host , login t o t he Rem ot e Unit using t he following com m and,where N
is t he Rem ot e Unit I D ( 1 - 8) : sshremote N
Once logged int o t he Rem ot e Unit , execut e t he following com m and, where X is
t he capacit y ( 1- 4) : /usr/local/fwu/bin/EEPROMWriteForCapacity.sh X
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 163
© 2011 ADC Telecom m unicat ions, I nc.
Reboot ing a Unit
REBOOTING A UNIT
CAUTION!
The system configuration is stored on the Host. Rebooting the Host therefore results in a
loss of RF for the Host and connected Remote Units until the Host comes back up.
Depending on the system configuration, it can take 5 to 20 minutes before management
communication is restored.
CAUTION!
Host configuration persists across a Reboot. However, the current EMS session will close
and you will need to log back in to the EMS after the Host reboot has completed.
CAUTION!
Rebooting a Remote Unit causes Loss of Service and should not be used unless other
troubleshooting processes have been followed and did not fix the issue being experienced
at the PRU/URU.
I n t he Syst em Tree, click on t he icon of t he unit t hat you want t o reboot .
I n t he Unit Menu bar, click Unit Configuration > Reboot, t o open t he Unit Configuration
> Reboot page.
Click Reboot.
•
Once t he reboot st art s, a process m essage displays.
•
Aft er t he reboot has com plet ed, a Unit has been rebooted m essage displays.
•
Aft er t he Host reboot s, t he EMS login window opens.
Page 164
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Managing Unit s
RESETTING AN LPA
CAUTION!
Once an LPA Reset is started, Loss of Service occurs. It takes approximately 10 to 20
seconds before the LPA signal recovers. The GUI RF power reading will take longer
depending on the number of Remotes equipped—for a fully loaded Prism system with 8
Remotes the power reading could take several minutes to update.
NOTE:
Only a user logged in under the admin or a Network Manager account can change Prism
system settings through the EMS.
You use t he LPA Reset but t on t o bring an LPA back int o service ( rest art ) t hat
st opped because of a m aj or LPA alarm . I n a dual- LPA syst em , reset t ing t he LPA
applies t o bot h LPAs at t he sam e t im e.
To access t he Configure Remote Forward Gain page, in t he Syst em Menu bar, click
System Configuration > Configure Remote Forward Gain.
I n t he Remote Id list , select t he Rem ot e Unit whose LPA you need t o reset .
I n t he Remote DART list , select t he DART whose LPA you need t o reset .
Click t he LPA Reset but t on.
I n t he LPA Reset caut ion dialog, click OK.
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 165
© 2011 ADC Telecom m unicat ions, I nc.
Reset t ing an LPA
I nt ent ionally Blank Page
Page 166
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
ALARMS
Topics
Page
View Current Alarm s............................................................................................................. 168
Clear Current Alarm s ............................................................................................................ 170
View Alarm Hist ory ............................................................................................................... 170
Clearing Alarm Hist ory .......................................................................................................... 172
Filt ering t he Alarm Hist ory..................................................................................................... 172
Manage Alarm s .................................................................................................................... 174
Enable and Disable Host and Rem ot e Unit Alarm s ............................................................... 178
Set RF Power Low Threshold ............................................................................................ 180
Ant enna Disconnect Alarm ............................................................................................... 181
Manage Cont act Alarm s ........................................................................................................ 182
Acknowledge All Alarm s ........................................................................................................ 183
Clear All Disconnect Alarm s ................................................................................................... 184
Troubleshoot ing Alarm s ........................................................................................................ 185
Maj or Alarm s—Host Unit .................................................................................................. 185
Maj or Alarm s—Host Unit DARTs........................................................................................ 185
Maj or Alarm s—Host SeRF Modules .................................................................................... 187
Maj or Alarm s—Host Unit SFPs .......................................................................................... 188
Maj or Alarm s—Rem ot e Unit s ............................................................................................ 189
Maj or Alarm s—PRU/ URU DARTs........................................................................................ 189
Maj or Alarm s—PRU/ URU SeRF Modules.............................................................................. 191
Maj or Alarm s—PRU/ URU SFPs .......................................................................................... 193
Maj or Alarm s—PRU or URU Duplexer ................................................................................. 194
Maj or Alarm s—PRU or URU LNA ........................................................................................ 194
Maj or Alarm s—PRU or URU LPA ........................................................................................ 195
Maj or Alarm s—PRU or URU Power Det ect or ........................................................................ 196
Minor Alarm s—Host Unit DARTs ........................................................................................ 197
Minor Alarm s—Host Unit SeRF Module ............................................................................... 197
Minor Alarm s—Host Unit SFPs .......................................................................................... 198
Minor Alarm s—PRU/ URU DARTs ........................................................................................ 198
Minor Alarm s—PRU/ URU SeRF Modules.............................................................................. 199
Minor Alarm s—PRU/ URU SFPs .......................................................................................... 200
Minor Alarm s—PRU or URU LPAs ....................................................................................... 200
Cont act Alarm s—Host Syst em Card ................................................................................... 201
Cont act Alarm s—Rem ot e Unit .......................................................................................... 201
This sect ion describes how t o m anage and underst and t he alarm s t hat are
report ed by t he EMS. This sect ion also provides corresponding Trap nam es.
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 167
© 2011 ADC Telecommunications, Inc.
View Current Alarm s
VIEW CURRENT ALARMS
To access t he View Current Alarms page, in t he Syst em Menu bar, click Alarms > View
Current Alarms. ( For inform at ion on t he alarm color codes, see “ Alarm Color Codes”
on page 44.)
The View Current Alarms t able provides t he following inform at ion:
•
Severity—whet her t he alarm is classified as Maj or or Minor.
•
Ack’d—whet her
checkm ark.
•
Alarm Code—syst em - assigned alarm code.
•
Alarm Name—descript ive nam e of alarm .
•
Timestamp—dat e and t im e when t he alarm occurred ( YYYY:MM:DD:HH:MM:SS)
•
Unit Id—ident ifies t he unit wit hin t he syst em t hat raised t he alarm ; see “ Unit
I dent ificat ion” on page 43.
•
Unit Type—what t he unit is, such as Host or Rem ot e
•
Unit Name—nam e assigned t o t he unit
•
Module—t ype of m odule t hat is experiencing t he alarm ( SeRF, DART, LPA, LNA,
Power Det ect or, SFP)
•
Module Name—user- assigned nam e for t he m odule.
•
RF Band—t ype of passband provided by t he DART.
Page 168
© 2011 ADC Telecommunications, Inc
t he alarm
has been
acknowledged,
as indicat ed by
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Alarm s
•
Extended Info—link t hat once clicked opens anot her web page, which provides
furt her inform at ion on t he alarm , including t roubleshoot ing inform at ion, as
shown in t he following graphic.
– Description—t ext descript ion of alarm
– Remedy—what you can do t o correct t he alarm st at e
– Threshold—value t hat once surpassed generat es an alarm
– Notes—user- defined not es, if any, for t he unit .
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 169
© 2011 ADC Telecom m unicat ions, I nc.
Clear Current Alarm s
CLEAR CURRENT ALARMS
To access t he View Current Alarms page, in t he Syst em Menu bar, click Alarms >
View Current Alarms.
I n t he View Current Alarms page, click Clear Alarms.
I n t he confirm at ion window, click OK.
All current alarm s, wit h t he except ion of persist ent alarm s, are cleared from
t he View Current Alarms t able.
VIEW ALARM HISTORY
To access t he View Alarm History page, in t he Syst em Menu bar, click Alarms > View
Alarm History. ( For inform at ion on t he alarm color codes, see “ Alarm Color Codes”
on page 44.)
Page 170
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Alarm s
The View Alarm History t able provides t he following inform at ion:
•
Severity—whet her t he alarm is classified as Maj or or Minor.
•
Ack’d—whet her
checkm ark.
•
Alarm Code—syst em - assigned alarm code.
•
Alarm Name—descript ive nam e of alarm .
•
Timestamp—dat e and t im e when t he alarm occurred ( YYYY:MM:DD:HH:MM:SS)
•
Unit Id—ident ifies t he unit wit hin t he syst em t hat raised t he alarm ; see “ Unit
I dent ificat ion” on page 43.
•
Unit Type—what t he unit is, such as Host or Rem ot e
•
Unit Name—nam e assigned t o t he unit
•
Module—t ype of m odule t hat is experiencing t he alarm ( SeRF, DART, LPA, LNA,
Power Det ect or, SFP)
•
Module Name—user- assigned nam e for t he m odule.
•
RF Band—t ype of passband provided by t he DART.
•
First, Previous, Last but t ons—if t he View Alarm History t able is longer t han what can
fit on a single web page, First, Previous, Last but t ons are included:
– First—j um ps t he display t o t he first page of alarm s
– Previous—j um ps t he display t o t he page of alarm s t hat you viewed
im m ediat ely prior t o t he current page
– Last—j um ps t he display t o t he last page of alarm s
•
Clear History but t on—see “ Clearing Alarm Hist ory” on page 172.
t he alarm
has been
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
acknowledged,
as indicat ed by
Page 171
© 2011 ADC Telecom m unicat ions, I nc.
Clearing Alarm Hist ory
CLEARING ALARM HISTORY
To access t he View Alarm History page, in t he Syst em Menu bar, click Alarms > View
Alarm History.
Click Clear History.
I n t he confirm at ion window, click OK.
The View Alarm History page is cleared.
FILTERING THE ALARM HISTORY
The View Alarm History page allows you t o filt er, or select , which alarm hist ories you
want t o page.
To access t he View Alarm History page, in t he Syst em Menu bar, click Alarms > View
Alarm History.
Do t he following in t he Filter panel:
I n t he View list , select how you want t o filt er t he alarm s:
•
None—all alarm s display
•
Unit Name—filt er by t he user- assigned nam e of a unit
•
Host Number—filt er by t he syst em - assigned num ber for t he Host
•
Remote Number—filt er by t he syst em - assigned num ber for a Rem ot e
•
Event Name—filt er by an event ( alarm or incident ) nam e.
Page 172
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Alarm s
I n t he contains box, ent er t he crit eria by which you want t o filt er t he alarm
hist ory list .
Click Filter.
The View Alarm History page refreshes, and now list s only t hose alarm s t hat m eet
t he specified filt er crit eria. I n t his exam ple, only t hose event s wit h t he word
“ DART” in t hem display.
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 173
© 2011 ADC Telecom m unicat ions, I nc.
Manage Alarm s
To rem ove t he filt er:
I n t he View list , select None.
Delet e any t ext from t he contains box.
Click Filter.
MANAGE ALARMS
To access t he Manage Alarms page, in t he Syst em Menu bar, click Alarms > Manage
Alarms.
•
For an exam ple of a Manage Alarms page for a Host Unit , see Figure 23 on
page 175 and Figure 24 on page 176.
•
For an exam ple of a Manage Alarms page for a Rem ot e Unit , see Figure 25 on
page 177 and Figure 26 on page 178.
The Manage Alarms page has t he following elem ent s:
•
Select m enu—has t he following im plem ent at ions:
– Global—displays alarm s for t he Host and all connect ed Rem ot e Unit s. Please
not e, however, t hat t his view does not reflect t he current st at us of alarm
enable/ disable condit ions—it is designed t o show you at a glance t hose
alarm s t hat can be m anaged. To effect a change in t he m anagem ent of an
alarm and t o see t he current st at e of an alarm , select a specific unit .
– Unit name—each unit in t he syst em is list ed by nam e, which allows you t o
select for which unit you want t o m anage alarm s.
•
Antenna Disconnect Severity m enu—see “ Ant enna Disconnect Alarm ” on page 181.
•
Unit field—what t ype of unit t he alarm pert ains t o:
– Host
– Remote
•
Module field—which m odule t he alarm pert ains t o:
– DART—can be up t o eight DARTs list ed
– LNA—can be up t o t wo LNAs list ed
– Power Detector
– SFP—can be up t o eight SFPs list ed
– SeRF
•
Alarm Name field—ident ifies t he alarm by nam e; see Table 23 on page 178.
NOTE:
For definitions of the alarms listed above, see “Troubleshooting Alarms” on page 185.
•
Enabled select ion box—select t o enable alarm report ing for t he corresponding
alarm .
•
Threshold Value field—value t hat once surpassed generat es t he specified alarm ;
see Table 23 on page 178.
Page 174
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Alarm s
Figure 23. Example of Manage Alarms Page—Host Unit Part 1
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 175
© 2011 ADC Telecom m unicat ions, I nc.
Manage Alarm s
Figure 24. Example of Manage Alarms Page—Host Unit Part 2
Page 176
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Alarm s
Figure 25. Example of Manage Alarms Page—Remote Unit Part 1
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 177
© 2011 ADC Telecom m unicat ions, I nc.
Manage Alarm s
Figure 26. Example of Manage Alarms Page—Remote Unit Part 2
Enable and Disable Host and Remote Unit Alarms
The Manage Alarms page allows you t o enable and disable alarm report ing for t he
alarm s list ed in Table 23 on page 178.
Table 23.
Alarms That Can Be Enabled/Disabled
Unit
Module
Alarm
Remote
RDI
AC Power Supply 1 Fault
Remote
RDI
AC Power Supply 2 Fault
Remote
RDI
AC Power Supply 3 Fault
Remote
RDI
AC Power Supply 4 Fault
Remote
PRU/URU
AC Power Supply Fault
Page 178
© 2011 ADC Telecommunications, Inc
Alarm Threshold
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Alarm s
Table 23.
Alarms That Can Be Enabled/Disabled (Cont.)
Unit
Module
Alarm
Alarm Threshold
Host
DART
DART ALC Limiting
+19 - Fwd Gain dBm
Host
DART
DART DC Supply Fault
Remote
DART
DART DC Supply Fault
Host
DART
DART Over Drive
+19 dBm
Remote
DART
DART Temperature High
85 Deg C
Remote
DART
DART Temperature Low
minus 40 deg C
Host
DART
DART Under Drive
+5 - Fwd Gain - 20 dBm
Remote
SeRF
Door Open
Remote
DART
Downconvert Fault
Remote
DART
DART DC Supply Fault
Remote
SFP
Excess Connections
Host
DART
FLM Downconvert Fault
Remote
DART
FWD Cal Tone Fault
Remote
SFP
Invalid Device Connection
Remote
LNA
LNA Power Fault
Host
SFP
Optical Over Drive
1 dBm(IR)/-9dBm(LR)
Remote
SFP
Optical Over Drive
1 dBm(IR)/-9dBm(LR)
Host
SFP
Optical RX High BER
0.00001
Remote
SFP
Optical RX High BER
0.00001
Host
SFP
Optical RX No Light
Remote
SFP
Optical RX No Light
Host
SFP
Optical Under Drive
-18 (IR) dBm/-27 dBm (LR)
Remote
SFP
Optical Under Drive
-18 dBm (IR)/ -27 dBm (LR)
Remote
DART
REV Test Tone Low
Remote
PD
RF Power Low
Host
DART
RLM Upconvert Fault
Host
DART
RLM Upconvert Indeterminate
Remote
SeRF
Software Version Mismatch Fault
Remote
PD
System VSWR Fault
3:1
Host
SeRF
Temperature High
62 Deg C
Remote
SeRF
Temperature High
95 Deg C
PRU/URU
SeRF
Temperature High
62 Deg C
Host
SeRF
Temperature Low
0 Deg C
Remote
SeRF
Temperature Low
Minus 40 Deg C
PRU/URU
SeRF
Temperature Low
0 Deg C
Remote
LPA
Under Power
Remote
DART
Upconvert Fault
Remote
DART
Upconvert Indeterminate
Remote
DART
Uplink Inactivity Fault
0 dBm*
10 dB above the noise floor.
* You can manually set the threshold for RF Power Low; see “Set RF Power Low Threshold” on page 180
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 179
© 2011 ADC Telecom m unicat ions, I nc.
Manage Alarm s
Do t he following t o enable/ disable alarm report ing:
To access t he Manage Alarms page, in t he Syst em Menu bar, click Alarms > Manage
Alarms.
I n t he Select list , select t he Rem ot e Unit for which you want t o change t he
t hreshold of t he RF Power Low alarm .
I n t he Threshold Value box for t he RF Power Low alarm , ent er t he new t hreshold,
which m ust be bet ween 0 dB - 40 dB.
Click Apply.
Set RF Power Low Threshold
The following rules apply t o set t ing alarm t hresholds:
•
Only t he t hreshold for t he RF Power Low alarm can be changed.
•
Only users wit h Net work Manager or Adm in privileges can perform t his
procedure.
•
Alarm t hresholds cannot be set t hrough SNMP MI Bs.
•
I f you perform a Reset to Factory Defaults, t he alarm t hreshold values are reset ;
you will need t o be reconfigure t he alarm t hreshold values, as necessary.
•
Alarm t hreshold values are configured by unit —t hey cannot be set globally for
all unit s in t he syst em .
Do t he following t o set t he RF Power Low alarm t hreshold:
To access t he Manage Alarms page, in t he Syst em Menu bar, click Alarms > Manage
Alarms.
I n t he Select list , select t he Rem ot e Unit for which you want t o change t he
t hreshold of t he RF Power Low alarm .
I n t he Threshold Value box for t he RF Power Low alarm , ent er t he new t hreshold,
which m ust be bet ween 0 dB - 40 dB.
Click Apply.
Page 180
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Alarm s
Antenna Disconnect Alarm
I n t he Manage Alarms page, t here is an Antenna Disconnect Severity m enu, which pert ains
only t o Rem ot e Access Unit s ( RAUs) in an I nt erReach Spect rum syst em . This
feat ure is t herefore not applicable t o a FlexWave Prism syst em and should not be
changed from it s default set t ing.
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 181
© 2011 ADC Telecom m unicat ions, I nc.
Manage Cont act Alarm s
MANAGE CONTACT ALARMS
To access t he Manage Contact Alarms page, in t he Syst em Menu bar, click Alarms >
Manage Contact Alarms.
I n t he Select m enu, select for which unit cont act alarm s are t o be configured.
The Manage Contact Alarms page has t he following Read- Only elem ent s:
•
Unit Name—nam e assigned t o t he unit
•
Contact Alarm—nam e assigned t o t he cont act alarm
I n t he Severity list , set t he severit y level of t he cont act alarm :
•
Minor ( default )
•
Major
I n t he Mode list , set t he m ode for t he cont act alarm :
•
Normally Open ( default )
•
Normally Closed
I n t he Name box, ent er a nam e for t his alarm .
•
Ent er bet ween 1 and 255 alphanum eric charact ers. Spaces and
Underscores are allowed, except t hey cannot be used as t he first charact er.
•
I f you do not want t o nam e t he alarm , leave t he Name box em pt y.
I n t he Enabled select ion box for t he alarm t hat you want t o m anage, do one of
t he following:
•
Select t he Enabled checkbox t o enable alarm report ing for t his alarm t ype.
•
Rem ove ( deselect ) t he checkm ark from t he Enabled checkbox t o disable
alarm report ing for t his alarm t ype.
Click Apply.
Page 182
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Alarm s
ACKNOWLEDGE ALL ALARMS
To access t he Acknowledge All Alarms page, in t he Syst em Menu bar, click Alarms >
Acknowledge All Alarms.
Click Acknowledge All.
I n t he confirm at ion window, click OK.
An All alarms have been acknowledged m essage displays.
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 183
© 2011 ADC Telecom m unicat ions, I nc.
Clear All Disconnect Alarm s
CLEAR ALL DISCONNECT ALARMS
NOTE:
Clear All Disconnects is not applicable to the Host—it is applicable only to PRUs.
CAUTION!
This procedure removes all information related to the disconnected units from the
configuration database.
To access t he Clear All Disconnects page, in t he Syst em Menu bar, click Alarms >
Clear All Disconnects.
Click Clear All Disconnects.
Aft er approxim at ely one m inut e, t he Syst em Tree updat es by rem oving t he
disconnect overlay from t he unit icon( s) . ( For an exam ple of t he disconnect
overlay, see Table 11 on page 42.)
Page 184
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Alarm s
TROUBLESHOOTING ALARMS
This sect ion list s and defines alarm s t hat t he FlexWave Prism EMS report s, and
provides rem edies for t hose alarm s. The MI B Trap nam e for each alarm is also
list ed.
Major Alarms—Host Unit
Ala r m :
Re m ot e Lost
Trap:
fwuHstSERFRmtLostFault
Alarm Code:
Definition:
Remedy:
AC1
Rem ot e Unit ( PRU/ URU) not com m unicat ing wit h Host .
Check t hat t he PRU/ URU has power and t hat t he power swit ch is on.
Check t hat at least one Host SFP is connect ed t o t his PRU/ URU and
has accept able RX power.
Major Alarms—Host Unit DARTs
Ala r m :
D ART D C Su pply Fa u lt
Trap:
fwuHstDARTDCSupplyFault
Alarm Code:
Definition:
Remedy:
AC28
DART card DC supply volt ages out side specificat ion.
Check whet her t he Host supply volt age is in t he range of 21- 60 VDC.
I f t he volt age is correct and t he alarm persist s for 5 m inut es ( m ay be
t ransient on st art up) , replace t he DART.
Ala r m :
D ART D ow n con ve r t e r 1 Syn t h e size r Unlock e d
Trap:
fwuHstDARTDwnCon1SynLockFault
Alarm Code:
Definition:
Remedy:
AC25
DART downconvert er 1 synt hesizer unlocked.
The Downconvert er 1 Synt hesizer Unlocked alarm can occur during
Host reboot s and DART hot swaps. I f t he alarm persist s aft er 5
m inut es, replace t he DART.
Ala r m :
D ART D ow n con ve r t e r 2 Syn t h e size r Unlock e d
Trap:
fwuHstDARTDwnCon2SynLockFault
Alarm Code:
Definition:
Remedy:
AC26
DART downconvert er 2 synt hesizer unlocked.
The Downconvert er 2 Synt hesizer Unlocked alarm can occur during
Host reboot s and DART hot swaps. I f t he alarm persist s aft er 5
m inut es, replace t he DART.
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 185
© 2011 ADC Telecom m unicat ions, I nc.
Troubleshoot ing Alarm s
Ala r m :
D ART Fa u lt
Trap:
fwuHstDARTFault
Alarm Code:
Definition:
Remedy:
AC29
Sum m ary of DART Downconvert er 1 Synt hesizer Unlocked,
Downconvert er 2 Synt hesizer Unlocked, Upconvert er Synt hesizer
Unlocked, DC Supply Fault alarm s, and DART FPGA st at us.
I nspect
alarm s
( Alarms
View
Current
Alarms)
for
upconvert er/ downconvert er/ DC supply alarm s on t he sam e Host
DART and follow t he rem edies for t hose alarm s. I f none of t hese
alarm s are found, unplug and replug t he DART in t he Host . I f t he
alarm persist s, replace t he DART.
Ala r m :
D ART H a r dw a r e M ism a t ch
Trap:
fwuHstDARTHardwareMismatchFault
Alarm Code:
Definition:
Remedy:
AC32
Host DART does not support t he select ed passband. Fault occurs
when a Host DART is replaced wit h anot her DART of t he incorrect
t ype.
I nst all a DART t hat support s t he select ed passband. I f t he Host DART
posit ion is t o be changed t o a different frequency band, rem ove and
clear t he DART configurat ion ( Unit Configuration > Clear DART Configuration) ,
inst all t he new DART, set t he passband, and est ablish t he new link
( System Configuration > Configure DART Links) .
Ala r m :
D ART Ove r D r ive
Trap:
fwuHstDARTOverDriveFault
Alarm Code:
Definition:
Threshold:
Remedy:
AC30
DART forward RF input t oo high.
+ 19 dBm
Reduce t he Host DART forward RF input level.
Ala r m :
D ART Upcon ve r t e r Syn t h e size r Un lock e d
Trap:
fwuHstDARTUpConSynLockFault
Alarm Code:
Definition:
Remedy:
AC27
DART upconvert er synt hesizer unlocked.
The DART Upconvert er Synt hesizer Unlocked alarm can occur during
Host reboot s and DART hot swaps. I f t he alarm persist s aft er 5
m inut es, replace t he DART.
Ala r m :
FLM D ow n con ve r t e r Fa u lt
Trap:
fwuHstBTSFLMFailFault
Alarm Code:
Definition:
Remedy:
AC47
Forward Link Monit or ( FLM) fault act ive.
I f alarm persist s, t hen replace t he DART.
Page 186
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Alarm s
Ala r m :
M odu le M issin g Fa ult
Trap:
fwuHstModuleMissingFault
Alarm Code:
Definition:
Remedy:
AC2
One of t he Host pluggable m odules is m issing ( DART/ SFP) .
Eit her replace Host m odule or clear DART configurat ion ( Unit
Configuration > Clear DART Configuration) .
Ala r m :
RLM Upcon ve r t Fa u lt
Trap:
fwuHstRLMUpconvertFailureFault
Alarm Code:
Definition:
Remedy:
AC48
Reverse Link Monit or ( RLM) fault act ive.
Running Syst em Test ( System Configuration > Perform System Test) wit h
un- t erm inat ed Host DARTs m ay cause a false RLM Upconvert Fault.
Ensure t hat all Host DARTs are t erm inat ed before running Syst em
Test . I f alarm persist s, t hen replace t he DART.
Major Alarms—Host SeRF Modules
Ala r m :
Fa n Fa u lt
Trap:
fwuHstSysCardFanFault
Alarm Code:
Definition:
Remedy:
AC6
Fan not funct ioning.
Verify int ake and exhaust vent s are clear of obst ruct ions and/ or
debris. I f alarm persist s, replace Fan Module.
Ala r m :
Se RF Fa u lt
Trap:
fwuHstSERFFault
Alarm Code:
Definition:
AC10
Sum m ary of SeRF Synt hesizer Unlocked alarm and SeRF FPGA
st at us.
Check for relat ed Host SeRF alarm s ( Alarms > View Current Alarms) . I f no
SeRF alarm s exist , FPGA is fault y; replace Host SeRF Module.
Remedy:
Ala r m :
Se RF Syn t h e size r Un lock e d
Trap:
fwuHstSERFSynthAlarmFault
Alarm Code:
Definition:
Remedy:
AC9
SeRF synt hesizer unlocked.
Check Host reference clock set t ings ( Unit Configuration > Edit Properties) .
Reseat t he Syst em Module. I f reference clock source is ext ernal,
verify 10 MHz clock source and connect ion. I f reference clock source
is int ernal and t he alarm s persist s, replace t he Host Syst em Module.
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 187
© 2011 ADC Telecom m unicat ions, I nc.
Troubleshoot ing Alarm s
Ala r m :
Te m pe r a t u r e H igh
Trap:
fwuHstOverTempFault
Alarm Code:
Definition:
Threshold:
Remedy:
AC4
Tem perat ure above operat ing lim it .
62° C
Check for Host Fan Fault alarm ( Alarms > View Current Alarms) . Verify t hat
am bient t em perat ure is less t han 50° C. Verify Host air int ake and
exhaust vent s are clear of debris.
Major Alarms—Host Unit SFPs
Ala r m :
Opt ica l Ove r D r ive
Trap:
fwuHstSERFOptOverDriveFault
Alarm Code:
Definition:
Threshold:
Remedy:
AC16
SFP opt ical receive input power above specificat ion.
Threshold for I R is 1 dBm , and for LR is - 9 dBm
Reduce t he opt ical receive level by adding opt ical at t enuat ion.
Replace opt ical at t enuat or if fault y.
Ala r m :
Opt ica l RX N o Ligh t
Trap:
fwuHstSERFOptRxNoLightFault
Alarm Code:
Definition:
Remedy:
AC14
No signal det ect ed by opt ical receiver.
Check for broken fiber opt ic cable; replace if found. Check for
disconnect ed fiber opt ic cable; reconnect cable if necessary. Check
t hat t he PRU/ URU has power.
Ala r m :
Opt ica l Tr a n sm it t e r Fa u lt
Trap:
fwuHstSERFOptLaserFault
Alarm Code:
Definition:
Remedy:
AC15
SFP opt ical t ransm it t er failed.
Replace Host SFP.
Page 188
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Alarm s
Major Alarms—Remote Units
The following alarm s apply t o bot h t he Prism Rem ot e Unit ( PRU) and t he URH
Rem ot e Unit ( URU) .
Ala r m :
M odu le M issin g Fa ult
Trap:
fwuRmtModuleMissingFault
Alarm Code:
Definition:
AC68
A pluggable m odule is m issing from a Rem ot e Unit , and can be any
of t he following: DART, SFP, LNA, LPA, or PD.
Eit her replace t he PRU/ URU m odule or clear DART configurat ion ( Unit
Configuration > Clear DART Configuration) .
Remedy:
Major Alarms—PRU/URU DARTs
The following alarm s apply t o DARTs inst alled in a Prism Rem ot e Unit ( PRU) or a
URH Rem ot e Unit ( URU) .
Ala r m :
D ART D C Su pply Fa u lt
Trap:
fwuRmtDARTDCSupplyFault
Alarm Code:
Definition:
Remedy:
AC97
DART card DC supply volt ages out side specificat ion.
I f t he alarm persist s for 5 m inut es ( m ay be t ransient on st art up) ,
replace t he DART.
Ala r m :
D ART Fa u lt
Trap:
fwuRmtDARTFault
Alarm Code:
Definition:
AC101
Sum m ary of DART Downconvert er 1 Synt hesizer Unlocked,
Downconvert er 2 Synt hesizer Unlocked, Upconvert er Synt hesizer
Unlocked, DC Supply Fault alarm s, and DART FPGA st at us.
I nspect
alarm s
( Alarms
View
Current
Alarms)
for
upconvert er/ downconvert er/ DC supply alarm s on t he PRU/ URU
DART and follow t he rem edies for t hose alarm s. For PRU DART
only—if none of t hese alarm s are present , power cycle t he RF Module.
I f t he alarm persist s, replace t he RF Module.
Remedy:
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 189
© 2011 ADC Telecom m unicat ions, I nc.
Troubleshoot ing Alarm s
Ala r m :
D ART H a r dw a r e M ism a t ch
Trap:
fwuRmtDARTHardwareMismatchFault
Alarm Code:
Definition:
Remedy:
AC98
Host DART does not support t he select ed passband. Fault occurs
when a Host DART is replaced wit h anot her DART of t he incorrect
t ype.
I nst all a DART t hat support s t he select ed passband. I f t he posit ion of
t he PRU/ URU DART is t o be changed t o a different frequency band,
rem ove and clear t he DART configurat ion ( Unit Configuration > Clear DART
Configuration) , inst all t he new DART, set t he passband, and est ablish
t he new link ( System Configuration > Configure DART Links) .
Ala r m :
D ow n con ve r t Fa u lt
Trap:
fwuRmtDownconvertfailureFault
Alarm Code:
Definition:
AC128
Band specific alarm raised during Reverse Link Monit oring on
PRU/ URU.
Ret ry Syst em Test ( System Configuration > Perform System Test) . I f alarm
persist s, replace t he DART.
Remedy:
Ala r m :
D ow n con ve r t e r 1 Syn t h e size r Un lock e d
Trap:
fwuRmtDARTDwnCon1SynLockFault
Alarm Code:
Definition:
Remedy:
AC93
DART downconvert er 1 synt hesizer unlocked.
The Downconvert er 1 Synt hesizer Unlocked alarm can occur during
Host reboot s and DART hot swaps. I f t he alarm persist s aft er 5
m inut es, replace t he DART.
Ala r m :
D ow n con ve r t e r 2 Syn t h e size r Un lock e d
Trap:
fwuRmtDARTDwnCon2SynLockFault
Alarm Code:
Definition:
Remedy:
AC94
DART downconvert er 2 synt hesizer unlocked.
The Downconvert er 2 Synt hesizer Unlocked alarm can occur during
Host reboot s and DART hot swaps. I f t he alarm persist s aft er 5
m inut es, replace t he DART.
Ala r m :
FW D Ca l Ton e Fa u lt
Trap:
fwuRmtDownlinkCalToneFailureFault
Alarm Code:
Definition:
Remedy:
AC124
Forward calibrat ion t one not at expect ed level.
Ret ry Syst em Test ( System Configuration > Perform System Test) . I f alarm
persist s, replace t he DART.
Page 190
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Alarm s
Ala r m :
REV Te st Ton e Low
Trap:
fwuRmtUplinkFailureDetectLowFault
Alarm Code:
Definition:
Remedy:
AC125
Reverse t est t one not at expect ed level.
Ret ry Syst em Test ( System Configuration > Perform System Test) . I f alarm
persist s, replace t he DART.
Ala r m :
Upcon ve r t Fa u lt
Trap:
fwuRmtUpconvertfailureFault
Alarm Code:
Definition:
AC126
Band specific alarm raised during Forward Link Monit oring on
PRU/ URU.
Ret ry Syst em Test ( System Configuration > Perform System Test) . I f alarm
persist s, replace t he DART.
Remedy:
Ala r m :
Upconve r t I nde t e r m ina t e
Trap:
fwuRmtUpconIndetFault
Alarm Code:
Definition:
AC129
Band specific alarm raised during Forward Link Monit oring on
PRU/ URU.
Ret ry Syst em Test ( System Configuration > Perform System Test) . I f alarm
persist s, replace t he DART.
Remedy:
Ala r m :
Upcon ve r t e r Syn t h e size r Un lock e d
Trap:
fwuRmtDARTUpConSynLockFault
Alarm Code:
Definition:
Remedy:
AC95
DART upconvert er synt hesizer unlocked.
The DART Upconvert er Synt hesizer Unlocked alarm can occur during
Host reboot s and DART hot swaps. I f t he alarm persist s aft er 5
m inut es, replace t he DART.
Major Alarms—PRU/URU SeRF Modules
The following alarm s apply t o a SeRF m odule inst alled in a Prism Rem ot e Unit
( PRU) or in a URH Rem ot e Unit ( URU) .
Ala r m :
Fa n Un de r Spe e d
Trap:
fwuRmtFanUnderSpeedFault
Alarm Code:
Definition:
Remedy:
AC77
Fans operat ing below expect ed RPM.
Verify int ake and exhaust vent s are clear of obst ruct ions and/ or
debris. I f alarm persist s, replace Fan Module.
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 191
© 2011 ADC Telecom m unicat ions, I nc.
Troubleshoot ing Alarm s
Ala r m :
H ost Lost
Trap:
fwuRmtSeRFHstLostFault
Alarm Code:
Definition:
Remedy:
AC88
Host not com m unicat ing wit h PRU/ URU.
Check t hat t he Host has power and t hat t he power swit ch is on. Check
t hat at least one of t he PRU/ URU SFPs is connect ed t o t his Host and
has accept able RX power.
Ala r m :
Se RF Fa u lt
Trap:
fwuRmtSERFFault
Alarm Code:
Definition:
AC87
Sum m ary of SeRF Synt hesizer Unlocked alarm and SeRF FPGA
st at us.
Check for relat ed Host SeRF alarm s ( Alarms > View Current Alarms) . I f no
SeRF alarm s exist , FPGA is fault y; replace PRU SeRF Module.
Remedy:
Ala r m :
Se RF Syn t h e size r Un lock e d
Trap:
fwuRmtSERFSynthAlarmFault
Alarm Code:
Definition:
Remedy:
AC86
SeRF synt hesizer unlocked.
Ensure t hat t he PRU/ URU has an opt ical input signal. Check t hat t he
Host reference clock is properly configured and is not in alarm ;
ot herwise replace t he PRU/ URU SeRF m odule.
Ala r m :
Te m pe r a t u r e H igh
Trap:
fwuRmtOverTempFault
Alarm Code:
Definition:
Threshold:
Remedy:
AC73
Tem perat ure above operat ing lim it .
95° C
Check for PRU/ URU Fan Fault alarm ( Alarms > View Current Alarms) . Verify
t hat am bient t em perat ure is less t han 50° C. Verify t hat t he air int ake
and exhaust vent s for t he PRU/ URU are clear of debris.
Page 192
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Alarm s
Major Alarms—PRU/URU SFPs
The following alarm s apply t o SFPs inst alled in a Prism Rem ot e Unit ( PRU) or in a
URH Rem ot e Unit ( URU) .
NOTE:
Cascading Remote Units is not supported in this release. Alarms that pertain to cascaded
Remote Units are included as reference only.
Ala r m :
Ex ce ss Con n e ct ion s
Trap:
fwuRmtExcessConnFault
Alarm Code:
Definition:
AC134
Two or m ore PRU/ URU connect ed t o a single cascaded PRU/ URU, or
a nint h PRU/ URU connect ed in cascade, or t here are m ore out going
fibers t han incom ing fibers on a PRU/ URU in a cascade.
Connect fiber opt ic cables per cascade connect ion rules. Refer t o
appropriat e inst allat ion guide for det ails.
Remedy:
Ala r m :
Fibe r Con n e ct ion M ism a t ch
Trap:
fwuRmtFiberConnMismatchFault
Alarm Code:
Definition:
AC133
Fiber opt ic cable connect ions bet ween cascaded PRU/ URUs not
following SFP connect ion rules.
Connect fiber opt ic cables per cascade connect ion rules. Refer t o
appropriat e inst allat ion guide for det ails.
Remedy:
Ala r m :
I n va lid D e vice Con n e ct ion
Trap:
fwuRmtInvalidDevConnFault
Alarm Code:
Definition:
Remedy:
AC135
PRU/ URU is connect ed t o a DRU or vice versa.
Ensure t hat cascaded Rem ot es are all t he sam e t ype ( t hat is, a PRU
t o a PRU and a DRU t o a DRU) . Refer t o appropriat e inst allat ion guide
for det ails.
Ala r m :
Opt ica l Ove r D r ive
Trap:
fwuRmtSERFOptOverDriveFault
Alarm Code:
Definition:
Threshold:
Remedy:
AC84
SFP opt ical receive input power above specificat ion.
Threshold for I R is 1 dBm , and for LR is - 9 dBm
Reduce t he opt ical receive level by adding opt ical at t enuat ion.
Replace opt ical at t enuat or if fault y.
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 193
© 2011 ADC Telecom m unicat ions, I nc.
Troubleshoot ing Alarm s
Ala r m :
Opt ica l RX N o Ligh t
Trap:
fwuRmtSERFOptRxNoLightFault
Alarm Code:
Definition:
Remedy:
AC82
No signal det ect ed by opt ical receiver.
Check/ repair opt ical overdrive condit ions ( Unit Information > View Optical
Ports) . Ensure t hat fiber opt ic connect ions are clean. Check for kinks
or sharp bends in t he fiber opt ic cable; replace fiber opt ic cable if
unable t o correct any problem s found.
Ala r m :
Opt ica l Tr a n sm it t e r Fa u lt
Trap:
fwuRmtSERFOptLaserFault
Alarm Code:
Definition:
Remedy:
AC83
SFP opt ical t ransm it t er failed.
Replace Host SFP.
Major Alarms—PRU or URU Duplexer
The following alarm s apply t o Duplexers, which are inst alled in t he Prism Rem ot e
Unit ( PRU) or t he URH Rem ot e Unit ( URU) .
Ala r m :
D u ple x e r M ism a t ch
Trap:
fwuRmtDuplexerFreqMismatchFault
Alarm Code:
Definition:
Remedy:
AC116
Configured frequency range not support ed by Duplexer.
Change DART passband t o fit wit hin duplexer frequency range ( System
Configuration > Configure DART Links). I f alarm persist s, cont act ADC.
Major Alarms—PRU or URU LNA
The following alarm s apply t o LNAs inst alled in a Prism Rem ot e Unit ( PRU) or URH
Rem ot e Unit ( URU) .
Ala r m :
LN A Pow e r Fa u lt
Trap:
fwuRmtLNAPowerFault
Alarm Code:
Definition:
Remedy:
AC115
PRU/ URU Low Noise Am plifier ( LNA) Power fault .
The low noise am plifier has an int ernal error. I f alarm persist s,
replace t he RF Module.
Page 194
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Alarm s
Major Alarms—PRU or URU LPA
The following alarm s apply t o LPAs inst alled in a Prism Rem ot e Unit ( PRU) or URH
Rem ot e Unit ( URU) .
Ala r m :
LPA D C Fa u lt
Trap:
fwuRmtLPADcFault
Alarm Code:
Definition:
Remedy:
AC109
PRU/ URU Linear Power Am plifier ( LPA) DC fault .
Caused by int ernally det ect ed problem wit h t he LPA. I m pact is loss
of RF service. Reset LPA. I f alarm persist s, replace t he RF Module.
Ala r m :
LPA D isa ble d
Trap:
fwuRmtLPADisableFault
Alarm Code:
Definition:
AC105
PRU/ URU Linear Power Am plifier ( LPA) disabled due t o an int ernally
det ect ed problem .
( VSWR, DC, Loop Fault , Low Power, or
Tem perat ure High alarm ) .
The LPA is disabled because of an int ernally det ect ed problem .
Perform an LPA Reset . I f t he fault persist s replace t he RF Module.
Remedy:
Ala r m :
LPA Loop Fa u lt
Trap:
fwuRmtLPALoopFault
Alarm Code:
Definition:
Remedy:
AC110
PRU/ URU Linear Power Am plifier ( LPA) Loop fault .
Caused by int ernally det ect ed problem wit h t he LPA. I m pact is loss
of RF service. Lower DART( s) gain by 10 dB, reset t he LPA, and ret urn
gain t o previous value. I f alarm persist s, replace RF Module.
Ala r m :
LPA Low Pow e r Fa u lt
Trap:
fwuRmtLPALowPowerFault
Alarm Code:
Definition:
AC111
I nt ernal Linear Power Am plifier ( LPA) Low Power fault . Gain of one
or m ore int ernal am plifiers out side of specificat ion) .
Caused by int ernally det ect ed problem wit h t he LPA. I m pact is loss
of RF service. Reset LPA. I f alarm persist s, replace t he RF Module.
Remedy:
Ala r m :
LPA M issin g
Trap:
fwuRmtLPADetectFault
Alarm Code:
Definition:
Remedy:
AC112
Linear Power Am plifier ( LPA) det ect ion fault . LPA m issing from PRU.
Cause is fault y RF Module. I m pact is loss of RF service. I f alarm
persist s, replace t he RF Module.
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 195
© 2011 ADC Telecom m unicat ions, I nc.
Troubleshoot ing Alarm s
Ala r m :
LPA Ove r Pow e r
Trap:
fwuRmtLPAOverPowerFault
Alarm Code:
Definition:
Threshold:
Remedy:
AC107
PRU/ URU Linear Power Am plifier ( LPA) out put power level above
operat ing lim it .
Variable by LPA band.
Causes include, forward pat h gains are set t oo high or Host RF input
levels are t oo high. I m pact is loss of RF service. Reduce PRU forward
gain ( " Syst em Configurat ion - > Configure Rem ot e Forward Gain" ) .
Reset t he LPA, and t hen m onit or RF out put power levels. Adj ust gain
t o accept able values. I f t he alarm persist s, replace t he RF Module.
Ala r m :
LPA VSW R Fa u lt
Trap:
fwuRmtLPAVswrFault
Alarm Code:
Definition:
Threshold:
Remedy:
AC108
PRU/ URU Linear Power Am plifier ( LPA) VSWR fault .
3: 1
Causes include, fault y RF Module, fault y/ loose RF Module t o bulkhead
cable, fault y/ loose ext ernal light ning arrest or, cable or ant enna.
I m pact is loss of RF service. Reset LPA. I f alarm persist s, replace t he
RF Module.
Major Alarms—PRU or URU Power Detector
Ala r m :
RF Pow e r Low
Trap:
fwuRmtRFPowerFault
Alarm Code:
Definition:
Threshold:
AC114
PRU/ URU RF Out put Power below m inim um t hreshold.
0 dBm ; can be configured by user, see “ Set RF Power Low Threshold”
on page 180.
Check for Host DART underdrive alarm or low RF input from BTS.
Check t he Host and Rem ot e forward gains are set correct ly.
Remedy:
Ala r m :
Syst e m VSW R Fa u lt
Trap:
fwuRmtSystemVswrFault
Alarm Code:
Definition:
Threshold:
Remedy:
AC113
PRU/ URU VSWR m easurem ent above specificat ion.
3: 1
Perform cable sweeps on ext ernal ant enna cable syst em . Put a load
on t he PRU/ URU by disconnect ing t he ext ernal ant enna cable t o
det erm ine if t he source of t he VSWR condit ion is int ernal or ext ernal.
I f int ernal, replace t he RF Module. I f ext ernal, t roubleshoot and
det erm ine source of high VSWR reading.
Page 196
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Alarm s
Minor Alarms—Host Unit DARTs
Ala r m :
D ART ALC Lim it in g
Trap:
fwuHstDARTALCLimitingFault
Alarm Code:
Definition:
Threshold:
Remedy:
AC33
Host DART forward pat h Aut om at ic Level Cont rol act ive.
+ 19 - Fwd Gain
Decrease t he Host DART forward pat h gain ( System Configuration >
Configure Host Forward Gain) , or reduce t he RF signal level from t he
BTS/ BDA.
Ala r m :
D ART Un de r D r ive
Trap:
fwuHstDARTUnderDriveFault
Alarm Code:
Definition:
Threshold:
Remedy:
AC31
DART forward RF input signal below t he norm al operat ing lim it .
+ 5 - Fwd Gain - 20
Check t hat an RF signal is present at t he Host DART forward input . I f
an RF signal is present , t hen increase t he forward gain of t he Host
DART. I f t he alarm does not clear when gain is at m axim um , increase
t he power of t he BTS/ BDA RF signal.
Ala r m :
RLM Upconve r t I n de t e r m ina t e
Trap:
fwuHstRLMUpConIndetFault
Alarm Code:
Definition:
Remedy:
AC49
Unable t o run RLM due t o Host Reverse Gain being set t oo low.
I ncrease Host Reverse Gain ( System Configuration > Configure Host Forward
Gain).
Minor Alarms—Host Unit SeRF Module
Ala r m :
Te m pe r a t u r e Low
Trap:
fwuHstUnderTempFault
Alarm Code:
Definition:
Threshold:
Remedy:
AC5
Tem perat ure below operat ing lim it .
0° C
Verify t hat am bient t em perat ure is great er t han 0° C; fix low
t em perat ure condit ion in t he Host 's locat ion.
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 197
© 2011 ADC Telecom m unicat ions, I nc.
Troubleshoot ing Alarm s
Minor Alarms—Host Unit SFPs
Ala r m :
Opt ica l RX H igh BER
Trap:
fwuHstSERFOptRxBERFault
Alarm Code:
Definition:
Threshold:
Remedy:
AC13
High bit error rat e ( BER) det ect ed by fiber opt ic receiver.
0.00001
Check/ repair opt ical overdrive condit ions ( Unit Information > View Optical
Ports) . Ensure t hat fiber opt ic connect ions are clean. Check for kinks
or sharp bends in t he fiber opt ic cable; replace fiber opt ic cable if
unable t o correct any problem s found.
Ala r m :
Opt ica l Un de r D r ive
Trap:
fwuHstSERFOptUnderDriveFault
Alarm Code:
Definition:
Threshold:
Remedy:
AC17
SFP opt ical receive input power below specificat ion.
Threshold for I R is - 1 dBm , and for LR is - 27 dBm
Check fiber opt ic cable for t oo m uch at t enuat ion and/ or dirt y
connect ions. Check SFP t ype ( wavelengt h or I R/ LR) being used;
replace t he SFP if it is t he wrong t ype.
Minor Alarms—PRU/URU DARTs
The following alarm s apply t o DARTs inst alled in a Prism Rem ot e Unit ( PRU) or in
a URH Rem ot e Unit ( URU) .
Ala r m :
D ART Te m pe r a t u r e H igh
Trap:
fwuRmtDARTOverTempFault
Alarm Code:
Definition:
Threshold:
Remedy:
AC99
DART t em perat ure above operat ing lim it .
85° C
Check t he PRU/ URU fans. Check t he air flow around t he PRU/ URU.
Ensure t hat t he PRU/ URU door is closed and t hat t he am bient
t em perat ure is less t han 50° C. Check t hat t he heat sink m at erial on
t he PRU/ URU DARTs has not been dam aged. I f t he alarm persist s,
replace RF Module.
Page 198
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Alarm s
Ala r m :
D ART Te m pe r a t u r e Low
Trap:
fwuRmtDARTLowTempFault
Alarm Code:
Definition:
Threshold:
Remedy:
AC100
DART t em perat ure below operat ing lim it .
- 40° C
Check am bient condit ions; fix low t em perat ure condit ions in t he
DART's locat ion.
Ala r m :
D e la y Ou t Of Ra n ge
Trap:
fwuRmtRangingFault
Alarm Code:
Definition:
Remedy:
AC96
PRU/ URU delay set t ings out side t he valid range.
Ent er forward and reverse delay values ( System Configuration > Configure
Delay) wit hin t he displayed range.
Minor Alarms—PRU/URU SeRF Modules
The following alarm s apply t o SeRF m odules inst alled in a Prism Rem ot e Unit ( PRU)
or in a URH Rem ot e Unit ( URU) .
Ala r m :
Fa n Ove r Spe e d
Trap:
fwuRmtFanOverSpeedFault
Alarm Code:
Definition:
Remedy:
AC76
Fans operat ing above expect ed RPM.
I f alarm persist s, t hen replace t he Fan Module.
Ala r m :
Te m pe r a t u r e Low
Trap:
fwuRmtUnderTempFault
Alarm Code:
Definition:
Threshold:
Remedy:
AC74
Tem perat ure below operat ing lim it .
Minus 40° C
Verify t hat am bient t em perat ure is great er t han - 40° C; fix low
t em perat ure condit ion at t he locat ion of t he PRU/ URU.
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 199
© 2011 ADC Telecom m unicat ions, I nc.
Troubleshoot ing Alarm s
Minor Alarms—PRU/URU SFPs
The following alarm s apply t o SFPs inst alled in a Prism Rem ot e Unit ( PRU) or in a
URH Rem ot e Unit ( URU) .
Ala r m :
Opt ica l RX H igh BER
Trap:
fwuRmtSERFOptRxBERFault
Alarm Code:
Definition:
Threshold:
Remedy:
AC81
High bit error rat e ( BER) det ect ed by fiber opt ic receiver.
0.00001
Check/ repair opt ical overdrive condit ions ( Unit Information > View Optical
Ports) . Ensure t hat fiber opt ic connect ions are clean. Check for kinks
or sharp bends in t he fiber opt ic cable; replace fiber opt ic cable if
unable t o correct any problem s found.
Ala r m :
Opt ica l Un de r D r ive
Trap:
fwuRmtSERFOptUnderDriveFault
Alarm Code:
Definition:
Threshold:
Remedy:
AC85
SFP opt ical receive input power below specificat ion.
Threshold for I R is - 1 dBm , and for LR is - 27 dBm
Check fiber opt ic cable for t oo m uch at t enuat ion and/ or dirt y
connect ions. Check SFP t ype ( wavelengt h or I R/ LR) being used;
replace t he SFP if it is t he wrong t ype.
Check for any m aj or alarm s ( Alarms > View Current Alarms) . Follow t he
rem edies for t hose alarm s.
Remedy:
Minor Alarms—PRU or URU LPAs
The following alarm s apply t o LPAs inst alled in a Prism Rem ot e Unit ( PRU) or URH
Rem ot e Unit ( URU) .
Ala r m :
LPA Ove r Te m pe r a t u r e
Trap:
fwuRmtLPAHighTempFault
Alarm Code:
Definition:
Threshold:
Remedy:
AC106
PRU/ URU LPA above operat ing lim it .
89° C
Check am bient t em perat ure. Fix any t em perat ure problem s in t he
area of t he PRU/ URU. Check t he PRU/ URU t em perat ure. Replace fan
if it is fault y and correct any air flow problem s around t he PRU/ URU.
Reset LPA. I f t he alarm persist s, replace t he RF Module.
Page 200
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Alarm s
Contact Alarms—Host System Card
Ala r m :
H ost M a j or Con t a ct Ala r m Ou t pu t Act ive
Trap:
fwuHstContactAlarmOutput1
Alarm Code:
Definition:
Remedy:
AC41
User configurable Maj or Cont act Alarm Out put act ive.
Check for any m aj or alarm s ( Alarms > View Current Alarms) . Follow t he
rem edies for t hose alarm s.
Ala r m :
H ost M in or Con t a ct Ala r m Ou t pu t Act ive
Trap:
fwuHstContactAlarmOutput2
Alarm Code:
Definition:
Remedy:
AC42
User configurable Minor Cont act Alarm Out put act ive.
Check for any m inor alarm s ( Alarms > View Current Alarms) . Follow t he
rem edies for t hose alarm s.
Ala r m :
H ost Con t a ct Ala r m I n pu t 1
Trap:
fwuHstContactAlarmInput1
Alarm Code:
Definition:
Remedy:
AC43
Host Cont act Alarm I nput # 1 act ive. Alarm level is user configurable.
Check equipm ent connect ed t o Host Cont act Alarm I nput 1, or check
cont act polarit y ( t hat is, Norm ally Open or Norm ally Closed) .
Ala r m :
H ost Con t a ct Ala r m I n pu t 2
Trap:
fwuHstContactAlarmInput2
Alarm Code:
Definition:
Remedy:
AC44
Host Cont act Alarm I nput # 2 act ive. Alarm level is user configurable.
Check equipm ent connect ed t o Host Cont act Alarm I nput 2, or check
cont act polarit y ( t hat is, Norm ally Open or Norm ally Closed) .
Contact Alarms—Remote Unit
The following alarm s can apply t o t he Prism Rem ot e Unit ( PRU) or t he URH Rem ot e
Unit ( URU) .
Ala r m :
Con t a ct Ala r m I n pu t 1 Act ive
Trap:
fwuRemoteContactAlarmInput1
Alarm Code:
Definition:
Remedy:
AC65
Rem ot e Unit ( PRU/ URU) Cont act Alarm I nput # 1 act ive.
Check equipm ent connect ed t o Rem ot e Unit ( PRU/ URU) Cont act
Alarm I nput 1, or check cont act polarit y ( i.e., Norm ally Open or
Norm ally Closed) .
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 201
© 2011 ADC Telecom m unicat ions, I nc.
Troubleshoot ing Alarm s
Ala r m :
Con t a ct Ala r m I n pu t 2 Act ive
Trap:
fwuRemoteContactAlarmInput2
Alarm Code:
Definition:
Remedy:
AC66
Rem ot e Unit ( PRU/ URU) Cont act Alarm I nput # 2 act ive.
Check equipm ent connect ed t o Rem ot e Unit ( PRU/ URU) Cont act
Alarm I nput 2, or check cont act polarit y ( i.e., Norm ally Open or
Norm ally Closed) .
Page 202
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
USERS
Topics
Page
Underst anding FlexWave EMS User Account s ........................................................................... 204
Manage Users Page .............................................................................................................. 205
Add a New User ............................................................................................................. 205
Change a User’s Access Level ........................................................................................... 207
Change a User Password ................................................................................................. 208
Change Your Personal Password ............................................................................................. 210
Recovering a Password ......................................................................................................... 211
Delet e a User ...................................................................................................................... 212
This sect ion t ells you how t o m anage users, passwords, and user access t o a Prism
syst em .
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 203
© 2011 ADC Telecommunications, Inc.
Underst anding FlexWave EMS User Account s
UNDERSTANDING FLEXWAVE EMS USER ACCOUNTS
The EMS provides securit y, which can be broadly classified as:
•
User Authentication, which defines t he way a user is ident ified prior t o being
allowed t o log on t o t he EMS. User Aut hent icat ion ensures t hat only known
users have access by providing a m et hod of ident ifying each user t hrough a
user I D and password.
•
User Authorization, which involves m anaging t he user’s privileges in t he Prism
net work m anagem ent infrast ruct ure. Aut horizat ion is based on t he concept of
user access syst em configurat ion rest rict ions.
There are t hree user- access account s t hat can be assigned by t he adm in:
•
adm in—t he default user account t hat has unrest rict ed access t o all EMS user
account s and m anagem ent capabilit ies. To prot ect against unaut horized access
t o t he Prism net work, t he user assigned t he adm in role should follow t he
process described in “ Change Your Personal Password” on page 210 t o change
t he password for t he adm in user account .
•
Net work Manager—has read and writ e access t o all syst em funct ions except
user account m anagem ent .
•
Net work User—has read only perm issions int o t he syst em .
There are also t wo default user- access account s for t he Rem ot e t hat cannot be
delet ed or changed:
•
operat or—is only support ed on t he Craft int erface of a Rem ot e, and provides
Read Only access t o m ost of t he Prism Rem ot e funct ions. However, t he operator
login can be only t o change t he Rem ot e Capacit y set t ing ( see “ Set t he Capacit y
for a New Rem ot e Unit RSI Board” on page 162) .
•
viewer—has Read Only right s for Prism and URH Rem ot es.
FlexWave EMS prevent s a login in which t he user ent ers an invalid User I D or
password. Table 24 list s t he default user account s and passwords.
Table 24.
Default User Account Device Access
Port Access
User Name Default Password
Host
Page 204
© 2011 ADC Telecommunications, Inc
Remote
admin
adc123
Network and
N/A
Craft ports
viewer
viewer
N/A
Craft port
operator
operator
N/A
Craft port
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Users
MANAGE USERS PAGE
The Manage Users page allows you t o:
•
“ Add a New User” on page 205
•
“ Change a User’s Access Level” on page 207
•
“ Change a User Password” on page 208.
Add a New User
CAUTION!
If Auto Complete (that is, remember username/password) is turned on in your web
browser, when you add a new user, the browser automatically fills in Prism user names
and passwords with the saved information. To avoid this, disable Auto Complete in your
browser.
To access t he Manage Users page, in t he Syst em Menu bar, click Users > Manage
Users.
I n t he Manage Users page, click Add New User.
Do t he following in t he Add New User page:
I n t he Name box, ent er a user
nam e, which m ust st art wit h
an
alphabet ical
charact er,
cont ain at least 5 charact ers
( alphanum eric or underscore
only) , and cont ain no spaces.
I n t he Password box, ent er a
password specific t o t his user.
The Password m ust cont ain at
least 6 alphanum eric or special
charact ers, and cannot be
em pt y or cont ain spaces.
I n t he Confirm Password box, ent er t he exact sam e password as you ent ered
in t he Password box.
I n t he Access Level m enu, select t he access level for t his user. See
“ Underst anding FlexWave EMS User Account s” on page 204.
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 205
© 2011 ADC Telecom m unicat ions, I nc.
Manage Users Page
Click Add.
The following m essage displays, list ing t he new user by Name. Addit ionally, t he
Add New User fields are cleared so you can add ot her users as needed.
I n t he Syst em Menu bar, click Users > Manage Users t o see an updat ed list of
users.
Page 206
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Users
Change a User’s Access Level
I n t he Syst em Menu bar, click Users > Manage Users t o see a list of users.
To change a user’s access, select t he user in t he Select colum n, which act ivat es
t he operat ional but t ons.
Click Change Access.
Verify t hat t he nam e list ed for Selected User is t he user whose access level you
want t o change.
I n t he Change Access Level page, use t he Access Level m enu t o change t he access
level for t his user. For furt her inform at ion on access levels, see “ Underst anding
FlexWave EMS User Account s” on page 204.
Click Change Access.
The Access Level for  is changed successfully m essage displays.
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 207
© 2011 ADC Telecom m unicat ions, I nc.
Manage Users Page
I n t he Syst em Menu bar, click Users > Manage Users t o see an updat ed list of
users.
At t his t im e t he operat ional but t ons, wit h t he except ion of Add New User and
Refresh, will be disabled, as no user is select ed.
Change a User Password
NOTE:
Only the admin user or a user with the Network Manager access level can change the
password of another user.
I n t he Syst em Menu bar, click Users > Manage Users t o see a list of users.
To change a user’s password, select t he user in t he Select colum n, which
act ivat es t he operat ional but t ons.
Page 208
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Users
Click Change Password.
I n t he Change Password page, do t he following:
Verify t hat t he nam e list ed
for Selected User is for t he user
whose password you want t o
change.
I n t he New Password box,
ent er a new password for
t his user. The Password
m ust cont ain at least 6
alphanum eric
or
special
charact ers, and cannot be
em pt y or cont ain spaces.
I n t he Confirm Password box,
ent er t he exact sam e password as you ent ered in t he New Password box.
Click Change Password.
The Password changed successfully m essage displays.
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 209
© 2011 ADC Telecom m unicat ions, I nc.
Change Your Personal Password
CHANGE YOUR PERSONAL PASSWORD
I n t he Syst em Menu bar, click Users > Change Password.
I n t he Change Password page, do t he following:
I n t he Old Password box, ent er your exist ing password.
I n t he New Password box, ent er a new password for t his user. The Password
m ust cont ain at least 6 alphanum eric or special charact ers, and cannot be
em pt y or cont ain spaces.
I n t he Confirm Password box, ent er t he exact sam e password as you ent ered
in t he New Password box.
Click Change Password.
The Password for  has been changed m essage displays.
Page 210
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Users
RECOVERING A PASSWORD
I f a user changes his or her password and t hen forget s t he new password, t he
adm in user needs t o recreat e an account for t he user.
I f t he password is changed and t hen forgot t en for t he adm in user, t he adm in
should cont act ADC for assist ance.
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 211
© 2011 ADC Telecom m unicat ions, I nc.
Delet e a User
DELETE A USER
I n t he Syst em Menu bar, click Users > Manage Users t o see a list of users.
Select t he user whose account is t o be delet ed in t he Select colum n, which
act ivat es t he operat ional but t ons.
Click Delete.
I n t he confirm at ion dialog, which ident ifies t he user being delet ed, click OK.
The User deleted successfully m essage displays and t he Users t able is updat ed in
t he Manage Users page.
Page 212
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
UPGRADING THE SYSTEM AND UNITS
Topics
Page
Upload t he Upgrade Files ...................................................................................................... 214
Updat ing a Prism Syst em ...................................................................................................... 216
Com m it t he Upgrade ............................................................................................................ 219
Abort an Updat e .................................................................................................................. 220
Updat ing I ndividual Unit s ...................................................................................................... 221
Upgrading a Prism syst em or a unit wit hin a Prism syst em is a t hree- st ep process,
in which you do t he following:
Upload t he upgrade file.
Use t he upgrade file t o updat e t he syst em or unit .
Com m it t he updat e.
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 213
© 2011 ADC Telecommunications, Inc.
Upload t he Upgrade Files
U PLOAD THE U PGRADE F ILES
Use t he Upload page t o t ransfer t he required upgrade files from a com put er or
lapt op t o your Prism syst em or unit .
Each soft ware upgrade requires t he following files t o go from one version t o t he
next :
•
upgrade.x-y.tar.gz.md5
•
upgrade.x-y.tar.gz
where
•
x ident ifies t he version from which t he unit / syst em is being upgraded
•
y ident ifies t he version t o which t he unit / syst em is being upgraded.
NOTE:
Each upgrade file set is designed to upgrade a specific EMS release, which may be
updating the EMS GUI or unit firmware, or both. If you try to apply upgrade files to a
system/unit that is not running the EMS release for which the upgrade files are designed,
the update will abort when it runs its version check.
Do t he following t o upload t he required upgrade files:
Cont act ADC t o obt ain t he appropriat e upgrade files ( see “ Appendix C:
Cont act ing ADC/ TE Connect ivit y” on page 297) .
Verify t hat t here is sufficient space on t he disk drive t o accom m odat e t he
upgrade files t hat you need t o upload.
Save t he upgrade files t o your com put er.
To access t he Upload page, in t he Syst em Menu bar, click Upgrades > Upload.
Click Browse.
I n t he Choose File dialog, navigat e t o where t he upgrade *.tar.gz and *.tar.gz.md5
files are st ored.
Page 214
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Upgrading t he Syst em and Unit s
Select t he *.tar.gz file, and t hen click Open.
The Choose File dialog closes and t he nam e of t he select ed file displays in t he
Upgrades > Upload page File box.
Click Upload.
Wait for t he File has been uploaded m essage t o display.
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 215
© 2011 ADC Telecom m unicat ions, I nc.
Updat ing a Prism Syst em
I n t he Upload page, Click Browse.
1 0 I n t he Choose File dialog, navigat e t o where t he upgrade *.tar.gz and *.tar.gz.md5
files are st ored.
1 1 Select t he *.tar.gz.md5 upgrade file, and t hen click Open.
1 2 The Choose File dialog closes and t he nam e of t he select ed file displays in t he
Upgrades > Upload page File box.
1 3 Click Upload.
Wait for t he File has been uploaded m essage t o display.
UPDATING A PRISM SYSTEM
Follow t his procedure t o updat e a FlexWave Prism syst em , or an individual unit
wit hin a FlexWave Prism syst em .
CAUTION!
Do not make any configuration changes during an update.
CAUTION!
This procedure takes the system selected for update temporarily offline (see estimates in
Table 25). Perform this procedure during normal maintenance window.
Table 25.
Estimated Time a System is Offline During an Upgrade
System Configuration
NOTE:
Approximate Time Offline
(Minutes)
1 Host + 1 Remote Unit
7 - 11
1 Host + 2 Remote Units
10 - 18
1 Host + 3 Remote Units
15 - 27
1 Host + 4 Remote Units
21 - 37
1 Host + 5 Remote Units
28 - 48
1 Host + 6 Remote Units
37 - 61
1 Host + 7 Remote Units
48 - 76
1 Host + 8 Remote Units
60 - 92
To update an individual unit, see “Updating Individual Units” on page 221.
Do t he following t o updat e an FlexWave Prism syst em :
Access t he Soft ware/ Firm ware report t o verify current syst em soft ware.
I n t he Syst em Menu bar, click System Information > Get Information.
The System Information > Get Information page opens.
I n t he Type list , select Software/Firmware. ( This is t he default set t ing.)
Page 216
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Upgrading t he Syst em and Unit s
The Software/Firmware t able provides t he following inform at ion:
•
Module Type—t ype of unit ( Host , PRU, or URU) .
•
Name—user- assigned nam e for t he unit .
•
Unit Id—ident ifies t he unit wit hin t he syst em ( see “ Unit I dent ificat ion” on
page 43) .
•
Version—version of inst alled soft ware/ firm ware.
•
Upgrade Status—t he following st at es can be seen. However, wit h t he
except ion of Normal operation and Upgraded, t he st at es occur very quickly
during t he corresponding act ion and are rarely viewed.
–
Normal operation
–
Upgrading
–
Upgrading reboot
–
Committing
–
Aborting
–
Recovering
–
Upgraded
–
NA ( analog unit s only) .
Follow t he st eps in “ Upload t he Upgrade Files” on page 214 t o upload t he
required upgrade files.
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 217
© 2011 ADC Telecom m unicat ions, I nc.
Updat ing a Prism Syst em
Updat e t he Host and t he Rem ot e Unit ( s) :
I n t he Syst em Menu bar, click Upgrades > Update Units.
I n t he Update Units page, you are not ified t hat t he file t hat you uploaded in
“ Upload t he Upgrade Files” on page 214 is ready for use. I f an upgrade file
is not list ed, repeat t he st eps in “ Upload t he Upgrade Files” on page 214.
NOTE:
I n t he Select Unit Type list , select Host+DRU+PRU+URU.
The IFEU + RAU option pertains to an InterReach Spectrum system only and is not
applicable to a Prism system. As such, do not select the IFEU + RAU option.
Click Update Now. An inform at ion m essage t hat t he updat e has st art ed
appears.
Wit hin four m inut es, t he EMS logs you off and t erm inat es t he EMS session.
Page 218
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Upgrading t he Syst em and Unit s
CAUTION!
At this point, the system goes offline for the approximate time listed in Table 25 on
page 216.
Wait approxim at ely four m inut es, and t hen log back in t o t he EMS t o
com plet e t his procedure.
Com plet e St ep 1 on page 216 t o verify t he st at us of t he Host / Rem ot e Unit ( s)
updat es.
COMMIT THE UPGRADE
NOTE:
If you need to abort an update, go to“Abort an Update” on page 220.
Com plet e t he st eps in “ Updat ing a Prism Syst em ” on page 216.
I n t he Syst em Menu bar, click Upgrades > Commit.
I n t he Upgrades > Commit page, click Commit.
I n t he confirm at ion window, click OK.
The syst em inform s you when t he com m it operat ion has com plet ed.
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 219
© 2011 ADC Telecom m unicat ions, I nc.
Abort an Updat e
ABORT AN UPDATE
An upgrade can be abort ed, if necessary.
NOTE:
If you want to commit an update, go to “Commit the Upgrade” on page 219.
To access t he Upgrades Abort page, in t he Syst em Menu bar, click Upgrades > Abort.
Click Abort.
I n t he confirm at ion window, click OK.
The syst em inform s you when t he abort operat ion has com plet ed.
Page 220
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Upgrading t he Syst em and Unit s
UPDATING INDIVIDUAL UNITS
Only perform a unit updat e on a unit when t he unit is being added t o t he syst em
as a new or replacem ent unit , and t he new unit requires a firm ware updat e t o
m at ch t he firm ware version of t he ot her unit s wit hin t he syst em .
CAUTION!
If this procedure is performed on a Host Unit, the Host is taken offline (see estimates in
Table 25 on page 216). Perform this procedure during normal maintenance time.
CAUTION!
Do not make any configuration changes during an update.
NOTE:
To update a Prism system, follow the steps in “Updating a Prism System” on page 216.
Com plet e t he following st eps t o updat e an individual Host , PRU, or URU:
Access t he Soft ware/ Firm ware report t o verify current syst em soft ware.
I n t he Syst em Menu bar, click System Information > Get Information.
The System Information > Get Information page opens.
I n t he Type list , select Software/Firmware. ( This is t he default set t ing.)
For inform at ion on t he Software/Firmware t able, see “ Updat ing a Prism Syst em ” .
Follow t he st eps in “ Upload t he Upgrade Files” on page 214 t o upload t he
required updat e files.
I n t he Syst em Tree, click on t he icon of t he unit t hat you want t o updat e.
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 221
© 2011 ADC Telecom m unicat ions, I nc.
Updat ing I ndividual Unit s
I n t he Unit Menu bar, click Unit Upgrades, Upgrade.
NOTE:
If you have not uploaded the required update files, the following page opens, and the
Update button is disabled. You cannot continue until the correct update files have been
loaded.
Click Update.
Wit hin four m inut es, t he EMS logs you off and t erm inat es t he EMS session.
CAUTION!
At this point, the system goes offline for the approximate time listed in Table 25 on
page 216.
Wait approxim at ely four m inut es, and t hen log back in t o t he EMS t o com plet e
t his procedure.
Com plet e St ep 1 on page 216 t o verify t he st at us of t he updat e. Do not m ove
forward t o t he next st ep unt il t he UpGrade Status in t he Soft ware/ Firm ware t able
is list ed as Upgraded.
Page 222
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Upgrading t he Syst em and Unit s
Com m it t he updat e t o t he unit . ( I f you need t o abort an updat e, go t o “ Abort
an Updat e” on page 220.)
I n t he Syst em Menu bar, click Upgrades > Commit.
I n t he Upgrades > Commit page, click Commit.
I n t he confirm at ion window, click OK.
The syst em inform s you when t he com m it operat ion has com plet ed.
Com plet e St ep 1 on page 216 t o verify t he st at us of t he updat e.
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 223
© 2011 ADC Telecom m unicat ions, I nc.
Updat ing I ndividual Unit s
I nt ent ionally Blank Page
Page 224
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
SPECIAL FEATURES
Topics
Page
Run Script ........................................................................................................................... 226
Run Com m and ..................................................................................................................... 226
Configure Feat ure ................................................................................................................ 227
This sect ion describes special feat ures of t he Prism EMS.
NOTE:
Some of the features in this section are for use by ADC only.
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 225
© 2011 ADC Telecommunications, Inc.
Run Script
R UN S CRIPT
The Run Script page, accessed via Special Features > Run Script, is not applicable t o a
Prism syst em and should not be used.
R UN C OMMAND
The Run Command page, accessed via Special Features > Run Command, is not applicable
t o a Prism syst em and should not be used.
Page 226
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Special Feat ures
C ONFIGURE F EATURE
CAUTION!
This procedure requires a system reboot. The system configuration is stored on the Host.
Rebooting the Host therefore results in a loss of RF for the Host and connected Remote
Units until the Host comes back up. Depending on the system configuration, it can take 5
to 20 minutes before management communication is restored.
CAUTION!
Host configuration will not persist across a Configure Feature Reboot—all settings will
revert to factory default. You will need to reconfigure the Prism system after the system
reboots.
CAUTION!
The current EMS session will close and you will need to log back in to the EMS after the
Host reboot has completed.
Docum ent all configurat ion dat a, as set t ings will have t o be re- ent ered. To
record t he current configurat ion:
Follow t he procedures in “ Viewing t he All Report ” on page 112 t o access t he
syst em configurat ion report s.
Follow t he procedures in “ Downloading a Report ” on page 113 t o download
t he syst em configurat ion report s t o a hard drive.
To access t he Configure Feature page, in t he Syst em Menu bar, click Special Features
> Configure Feature.
I n t he Feature box, ent er t he
code for t he feat ure.
I n t he Password box, ent er t he
password t hat enables t he
feat ure.
Click Apply.
I n t he confirm at ion dialog, click OK.
Log back in t o t he EMS once t he login window displays.
Follow t he st eps in “ I nit ial FlexWave Prism Syst em Set up” on page 55 t o
reconfigure t he Prism syst em , using t he set t ings recorded in St ep 1 on
page 227.
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 227
© 2011 ADC Telecom m unicat ions, I nc.
Configure Feat ure
I nt ent ionally Blank Page
Page 228
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
USING AN SNMP INTERFACE
Topics
Page
SNMP Overview ................................................................................................................... 230
Working wit h Prism MI B Files................................................................................................. 231
Accessing Prism MI Bs...................................................................................................... 233
Syst em Dat e and Tim e MI B Form at ................................................................................... 234
Band Types ................................................................................................................... 235
Prism MI B Obj ect s................................................................................................................ 236
Param et ers in ADC- FLEXWAVE- URH- MI B ........................................................................... 237
Syst em - Level Param et ers .......................................................................................... 237
Host Unit Param et ers ................................................................................................ 239
Host Param et ers.................................................................................................. 239
Host SeRF Card Param et ers .................................................................................. 240
Host SeRF Opt ics Param et ers ................................................................................ 243
Host SeRF ENET Swit ch Param et ers ....................................................................... 245
Host SeRF FPGA Param et ers ................................................................................. 247
Host List of Rem ot es Param et ers ........................................................................... 247
Host DART Module Param et ers .............................................................................. 248
Host Syst em Card Param et ers ............................................................................... 252
Rem ot e Unit Param et ers ............................................................................................ 254
Rem ot e Param et ers ............................................................................................. 254
Prism Rem ot e Syst em Card................................................................................... 256
Prism Rem ot e SeRF General.................................................................................. 257
Prism Rem ot e SeRF Opt ics.................................................................................... 260
Prism Rem ot e SeRF ENET Swit ch ........................................................................... 262
Prism Rem ot e SeRF FPGA ..................................................................................... 264
Prism Rem ot e DART............................................................................................. 264
Prism Rem ot e LPA ............................................................................................... 270
Prism Rem ot e Power Det ect or ............................................................................... 272
Prism Rem ot e LNA/ Duplexer ................................................................................. 273
Prism Rem ot e RDI Card ........................................................................................ 274
Prism Rem ot e RSI Card ........................................................................................ 275
Com m on Managed Obj ect s ......................................................................................... 276
Prism DART Mapping ............................................................................................ 276
Schedule Syst em Link Test ................................................................................... 278
SNMP Set t ings .................................................................................................... 279
Regist er SNMP Trap Manager ................................................................................ 280
Geographic Locat ions ................................................................................................ 281
GEO Obj ect s ....................................................................................................... 281
GEO Table Obj ect s............................................................................................... 282
Managed Obj ect s for Traps ......................................................................................... 283
Prism I nput Cont act Alarm Managem ent Table......................................................... 283
Syst em Act ive Alarm Table ................................................................................... 284
Alarm Managem ent Table ..................................................................................... 287
Alarm Enable Table .............................................................................................. 288
St at ic Alarm s Table.............................................................................................. 288
Working wit h SNMP Traps ..................................................................................................... 290
View t he Traps ............................................................................................................... 290
Managing Traps.............................................................................................................. 291
Dat e and Tim e St am ps in Traps ........................................................................................ 292
Variable Bindings............................................................................................................ 293
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 229
© 2011 ADC Telecommunications, Inc.
SNMP Overview
SNMP OVERVIEW
SNMP ( Sim ple Net work Managem ent Prot ocol) is an int ernat ional st andard for
rem ot e cont rol of online devices. A t ypical scenario involves t he devices being
cont rolled, rem ot e com put ers ( called m anagers) t hat can cont rol t hem , a net work
connect ion, and SNMP soft ware. The SNMP soft ware includes SNMP m anager
soft ware on cont rolling com put ers, SNMP agent soft ware on m anaged devices,
and one or m ore MI Bs used by t he SNMP m anagers for each cont rolled device. I n
som e cases, SNMP proxy agent soft ware is run on an int erm ediat e device t o
access a m anaged device t hat would not ot herwise be direct ly accessible.
The Prism syst em SNMP int erface, shown schem at ically in Figure 27 allows a
rem ot e user using an SNMP m anager t o access t he sam e dat abase as accessed by
t he st andard EMS int erface.
IP
Web
Windows 2000 or Windows XP
computer running
Internet Explorer or Mozilla
and/or SNMP Manager
IP
TRAP
GET/SET
Network port
EMS
INTERNAL
Database
Host Unit
Figure 27. SNMP and a Prism System
Page 230
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Using an SNMP I nt erface
WORKING WITH PRISM MIB FILES
NOTE:
Examples shown in this chapter use a browser from AdventNet or iReasoning. Procedural
details may vary with another browser, but the basic steps are the same.
NOTE:
In the Prism system, the database accessed through the SNMP interface is the same
database as used by the EMS graphical user interface. There is therefore a similarity
between MIB objects and the parameters displayed in the EMS Web pages.
Figure 28 shows t he feat ures of a t ypical MI B browser.
Figure 28. Typical MIB Browser
As m ent ioned earlier, a MI B is a dat abase specificat ion cont aining definit ions and
organizat ion of inform at ion. The dat abase consist s of t ables of obj ect s used t o
exchange inform at ion bet ween a m anager and agent . Dat abase inform at ion is
exchanged using t he following basic operat ions:
•
GET—obt ains an obj ect value from t he dat abase.
•
SET—set s t he value of an obj ect in t he dat abase.
•
GET-NEXT—get s t he next it em in t he dat abase, be it t he next t ype of obj ect or
t he next obj ect of t he specified t ype. This is especially useful for discovering
t he presence of ent ries in dynam ic t ables.
•
GET-BULK—request s m ult iple it em s in one m essage.
•
TRAP/NOTIFICATION—sends an alarm in which a response can be sent by a
m anager t o an agent confirm ing receipt of t he alarm .
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 231
© 2011 ADC Telecom m unicat ions, I nc.
Working wit h Prism MI B Files
I n a m anager browser, a MI B looks like t he EMS Syst em Tree’s hierarchy of folders
and files, as shown in Figure 29.
Figure 29. Prism MIB Tree
MI B it em s are arranged in a hierarchy of groups, like a hierarchy of folders. Known
OI Ds specify scalars ( obj ect s) . MI B obj ect s are arranged in groups and t ables. To
be specified com plet ely, t able ent ries require one or m ore row indices. Each set of
obj ect s ( wit hin a single folder) represent s one such group or t able. An obj ect
m arked wit h a key sym bol indicat es t hat view is t he key value for t hat t able.
The Prism MI B is defined by t hree files:
•
ADC-FWU-URH-TC-MIB.mib
•
ADC-FWU-IRS-TC-MIB.mib
•
ADC-FLEXWAVE-URH.mib
The MI B can be found on t he SeRF I I card in t he Host in /usr/local/fwu/mibs.
“ Prism MI B Obj ect s” on page 236 list s obj ect s t hat m ay be accessed for GET/ SET
operat ions and t raps/ not ificat ions t hat are sent t o SNMP m anagers regist ered t o
receive t hem whenever t he respect ive fault condit ion occurs.
NOTE:
TRAPS/NOTIFICATIONS are listed with the corresponding EMS alarm in
“Troubleshooting Alarms” on page 185.
Page 232
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Using an SNMP I nt erface
Accessing Prism MIBs
The Prism Agent MI B can be accessed using any SNMP m anager wit h an act ive
net work connect ion. The I P address of t he Host m ust be known and ent ered in t he
MI B browser.
On t he m anager com put er, open t he MI B Browser.
Load t he MI B files in t he following order:
ADC-FWU-URH-TC-MIB.mib
ADC-FWU-IRS-TC-MIB.mib
ADC-FLEXWAVE-URH.mib
Ent er t he I P address of t he Host of t he Prism syst em in t he t ext box provided
next t o Host.
Ent er t he Port number as 161.
NOTE:
If you are upgrading from a previous release, note the change in the SNMP Port number.
In previous releases, the SNMP Port number was 8001. It is now 161.
Ent er t he Read Community as public and Write Community as private.
Set Timeout t o 15 seconds.
For SNMP version v2c and v3, set Maximum Repetitions t o 10 or less.
To see an overview t he MI B cont ent , expand t he MI B t ree, as shown below.
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 233
© 2011 ADC Telecom m unicat ions, I nc.
Working wit h Prism MI B Files
System Date and Time MIB Format
fwuHstSystemDateandTime allows you t o set t he syst em dat e and t im e, where t he
input is as follows:
YYYY-MM-DD,HH:MM:SS.D (24-Hour Time Format)
where fields are required ( none are opt ional) and indicat e t he following in 24- Hour
t im e form at .
•
YYYY—Year
•
MM—Mont h
•
DD—dat e
•
HH—Hour
•
MM—Min ut e
•
SS—Seconds
You can input t he m ont h, dat e, hour, m inut es, seconds, and deci seconds as a
single digit or as a double digit ( t hat is, prefixed wit h 0) .
The support ed dat e and
2037-12-31,23:59:59.
t im e
range
is
from
1970-01-01,00:00:00
to
The out put for m ont h, dat e, hour, m inut es, and seconds will always be in double
digit form at ( prefixed wit h 0) . The out put for deci seconds will always be single
digit .
For exam ple, t he out put of 2009-01-02,03:04:05 can be result ant from eit her of t he
following input s:
•
I nput 1—2009-01-02,03:04:05
•
I nput 2—2009-1-2,3:4:5
Page 234
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Using an SNMP I nt erface
Band Types
Table 26 list s t he band t ypes for Host RF DARTs, and Table 27 on page 236 list s
t he band t ypes for Rem ot e I F DARTs.
Table 26.
MIB Band Types—Host RF DARTS
MID Value Band Type
-1
undefined
Classic850
Classic1900
ClassicSMR800
ClassicSMR900
ClassicAws2100
Classic1800
200
SingleSuperPcs1900
201
SingleSuper1800
202
SingleSuperUmts2100
203
SingleSuperAws2100
SuperPcs1900
10
SuperUmts2100
11
SuperAws2100
12
SuperEgsm900
13
SuperLowerAbc700
14
SuperUpperC700
205
SingleSuperLowerAbc700
206
SingleSuperUpperC700
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 235
© 2011 ADC Telecom m unicat ions, I nc.
Prism MI B Obj ect s
Table 27.
MIB Band Types—Remote IF DARTS
MID Value Band Type
15
SuperIf850
16
SuperIfPcs1900
17
SuperIfSmr800
18
SuperIfSmr900
19
SuperIf1800
21
SuperIfAws2100
23
SuperIfPath1LowerAbc700
24
SuperIfPath1UpperC700
25
SuperIfPath2LowerAbc700
26
SuperIfPath2UpperC700
207
SingleSuperIf850
208
SingleSuperIfPcs1900
209
SingleSuperIfSmr800
210
SingleSuperIfSmr900
211
SingleSuperIf1800
213
SingleSuperIfAws2100
215
SingleSuperIfPath1LowerAbc700
216
SingleSuperIfPath1UpperC700
217
SingleSuperIfPath2LowerAbc700
218
SingleSuperIfPath2UpperC700
PRISM MIB OBJECTS
Obj ect s in t he Prism Agent MI B divide int o t wo t ypes: GET/ SET obj ect s and
Trap/ Not ificat ion obj ect s.
For each GET and SET obj ect , t here is an SNMP synt ax, which is a range of values
defined in t he MI B file. These values are what can be ent ered in a SET com m and
and ret urned in a GET com m and.
The following sect ions list all MI B obj ect s wit hin t he Prism Agent MI B. Obj ect s t hat
are available for SET com m ands are also available for GET com m ands.
Page 236
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Using an SNMP I nt erface
Parameters in ADC-FLEXWAVE-URH-MIB
System-Level Parameters
Syst e m D a t e a n d Tim e
SNMP MIB:
Description:
Values:
fwuHstSystemDateAndTime
The dat e and t im e set t ings on t he syst em
1970- 01- 01,00: 00: 00 t o 2037- 12- 31,23: 59: 59; see “ Syst em Dat e
and Tim e MI B Form at ” on page 234
Default:
Syst em t im e
Syntax:
Dat eAndTim e
Access Level: Oct et St ring
Syst e m Ala r m Ack n ow le dge
SNMP MIB:
Description:
Values:
fwuSystemAlarmAck
Acknowledges all or individual alarm s
0 = Acknowledge all alarm s
Great er t hen 0, I d of t he alarm t o be acknowledged
Syntax:
I nt eger32
Access Level: Read- Writ e
Syst e m Ala r m Le ve l
SNMP MIB:
Description:
Syntax:
Access Level:
fwuAlarmLevel
Alarm level of syst em
Alarm Type
Read- Writ e
Syst e m Te st On Pow e r Up
SNMP MIB:
Description:
Values:
fwuPwrUpLinkTest
Syst em / Link Test on Power Up ( Link Test )
1 = Enable
0 = Disable
Default:
Syntax:
Unsigned32
Access Level: Read- Writ e
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 237
© 2011 ADC Telecom m unicat ions, I nc.
Prism MI B Obj ect s
D ART Ba n d Type for Syst e m Te st Use r Com m a nde d
SNMP MIB:
Description:
Values:
Default:
Syntax:
Access Level:
fwuUserCommLinkTestDartBandType
Band t ype ( t he RF DART t ype) of select ed unit s
See “ Band Types” on page 235.
BandType
Read- Writ e
D ART I D for Syst e m Te st Use r Com m a n de d
SNMP MIB:
Description:
Values:
Syntax:
Access Level:
fwuUserCommLinkTestDartId
I d of a part icular DART
1 - 8
I nt eger32
Read- Writ e
Syst e m Ala r m St a t u s Su m m a r y
SNMP MIB:
Description:
Syntax:
Access Level:
fwuSystemAlarmStatusSummary
Alarm St at us Sum m ary for ent ire syst em
Alarm Type
Read Only
Cle a r Syst e m Con figu r a t ion
SNMP MIB:
Description:
fwuClearSysConfig
Changing t he value from 0 t o 1 clears t he set t ing for t he ent ire
set t ings on t he syst em
Values:
0 = Disable
1= Enable
Default:
Syntax:
I nt eger32
Access Level: Read- Writ e
La st Run Tim e of Syst e m / Lin k Te st
SNMP MIB:
Description:
Syntax:
Access Level:
fwuLinkTestLastRunTime
Tim e when t he Syst em / Link t est was last run
Dat eAndTim e
Read Only
Page 238
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Using an SNMP I nt erface
Host Unit Parameters
Host Parameters
H ost N u m be r
SNMP MIB:
Description:
Values:
Default:
Syntax:
Access Level:
fwuHstNumber
Num ber enum erat ing a Host
A num ber great er t han 0
I nt eger32
Read Only
H ost N a m e
SNMP MIB:
Description:
Values:
fwuHstName
User defined nam e of t he Host
Alphanum eric Charact ers. Except as first charact er, t he underscore
( _) charact er is allowed. Must be 5 t o 40 charact ers in lengt h, wit h
no spaces.
Default:
Unknown_Host Nam e
Syntax:
Display St ring
Access Level: Read- Writ e
H ost Un it Re se t
SNMP MIB:
Description:
Values:
fwuHstUnitReset
Reset s t he Host SeRF card when t he value is changed from 0 t o 1
0= norm al
1 = reset
Default:
Syntax:
I nt eger
Access Level: Read- Writ e
H ost Ba ck Pla ne Re vision
SNMP MIB:
Description:
fwuHstBackPlaneRev
Provides t he back plane revision of t he Host ( Three pin Version
Num ber of t he Chassis back plane)
Values:
SI ZE ( 1…40)
Syntax:
Oct al St ring
Access Level: Read Only
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 239
© 2011 ADC Telecom m unicat ions, I nc.
Prism MI B Obj ect s
H ost Ala r m St a t u s Sum m a r y
SNMP MIB:
Description:
Syntax:
Access Level:
fwuHstAlarmStatusSummary
Alarm St at us Sum m ary for Host
ALARM- TYPE
Read Only
Te m pe r a t u r e M e a su r e m e n t
SNMP MIB:
Description:
Values:
Syntax:
Access Level:
fwuHstTempMeas
Host syst em t em perat ure value in Celsius
SI ZE ( 1…8)
Oct al St ring
Read Only
Lin k in g M ode
SNMP MIB:
Access Level:
Values:
Default:
Syntax:
Access Level:
fwuHstLinkingMode
The DART Linking m ode on t he Syst em
2 = Manual
I nt eger
Read- Writ e
Host SeRF Card Parameters
Lin u x Ke r n e l Ve r sion
SNMP MIB:
Description:
Syntax:
Access Level:
fwuHstSERFLinuxKernelVer
Linux Kernel Version of t he Host syst em
Display St ring
Read Only
Lin u x Boot Loa de r Ve r sion
SNMP MIB:
Description:
Syntax:
Access Level:
fwuHstSERFLinuxBootLoaderVer
Version Num ber of t he second st age boot loader
Display St ring
Read Only
Com pa ct Fla sh SW Ve r sion
SNMP MIB:
Description:
Values:
fwuHstSERFCompactFlashSWVer
Com pact Flash Version of t he Host syst em
Form at of: aa.bb.cc.dd
where each of aa, bb, cc, dd m ust be bet ween 00 and 99
Syntax:
Display St ring
Access Level: Read Only
Page 240
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Using an SNMP I nt erface
PPC H W M on it or SW Ve r sion
SNMP MIB:
Description:
fwuHstSERFPPCHWMonSWVer
Soft ware Version of t he hardware Monit or process running on t he
Host
Syntax:
Display St ring
Access Level: Read Only
PPC Applica t ion M on it or SW Ve r sion
SNMP MIB:
Description:
fwuHstSERFPPCAPPMonSWVer
Soft ware Version of t he Applicat ion Monit or process running on t he
Host
Syntax:
Display St ring
Access Level: Read Only
SN M P Age n t SW Ve r sion
SNMP MIB:
Description:
Syntax:
Access Level:
fwuHstSERFPPCSNMPAgentSWVer
Soft ware Version of t he HTTP/ SNMP agent running on Host
Display St ring
Read Only
PPC M a t e M on it or SW Ve r sion
SNMP MIB:
Description:
fwuHstSERFPPCMATEMonSWVer
Soft ware Version of t he Mat e Monit or process running on t he Host
Unit
Syntax:
Display St ring
Access Level: Read Only
PPC EN ET M on it or SW Ve r sion
SNMP MIB:
Description:
fwuHstSERFPPCENETMonSWVer
Soft ware Version of t he Et hernet Monit or process running on t he Host
Unit
Syntax:
Display St ring
Access Level: Read Only
PPC FPGA M on it or SW Ve r sion
SNMP MIB:
Description:
Syntax:
Access Level:
fwuHstSERFPPCFPGAMonSWVer
Version of FPGA Loaded on SeRF
Display St ring
Read Only
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 241
© 2011 ADC Telecom m unicat ions, I nc.
Prism MI B Obj ect s
Lin u x Fir st St a ge Boot Loa de r Ve r sion
SNMP MIB:
Description:
Syntax:
Access Level:
fwuHstSERFLinuxBootLoaderVer
Boot Loader1 Version of t he Host syst em
Display St ring
Read Only
Se RF FPGA Ve r sion
SNMP MIB:
Description:
Syntax:
Access Level:
fwuHstSERFFPGAVer
Version of FPGA Loaded on SeRF
Display St ring
Read Only
RI AD C Pa r t N u m be r
SNMP MIB:
Description:
Syntax:
Access Level:
fwuHstSERFRIADCPartNumber
Host SeRF I nvent ory - ADC Part Num ber
Display St ring
Read Only
RI Se r ia l N u m be r
SNMP MIB:
Description:
Syntax:
Access Level:
fwuHstSERFRISerialNumber
Host SeRF I nvent ory - Serial Num ber
Display St ring
Read Only
RI D a t e Code
SNMP MIB:
Description:
Syntax:
Access Level:
fwuHstSERFRIDateCode
Host SeRF I nvent ory - Dat e Code
Display St ring
Read Only
Se RF RI H a r dw a r e Ve r sion
SNMP MIB:
Description:
Syntax:
Access Level:
fwuHstSERFRIHWVer
Host SeRF I nvent ory - Hardware Version
Oct al St ring
Read Only
Se RF RI H a r dw a r e Ge n e r a t ion
SNMP MIB:
Description:
Values:
fwuHstSERFRIHWGen
Host SeRF Hardware Generat ion
0 = First Generat ion
1 = Second Generat ion
Syntax:
I nt eger
Access Level: Read Only
Page 242
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Using an SNMP I nt erface
pTh r e a d Soft w a r e Ve r sion
SNMP MIB:
Description:
Syntax:
Access Level:
fwupThreadSoftwareVersion
The version num ber of pThread process
DisplaySt ring
Read Only
Su ba ge n t Soft w a r e Ve r sion
SNMP MIB:
Description:
Syntax:
Access Level:
fwuSubagentSwVersion
The version num ber of t he subagent
DisplaySt ring
Read Only
W e b Se r ve r Soft w a r e Ve r sion
SNMP MIB:
Description:
Syntax:
Access Level:
fwuWebServerSwVersion
The version num ber of web server
DisplaySt ring
Read Only
Host SeRF Optics Parameters
SFP N u m be r
SNMP MIB:
Description:
Values:
Syntax:
Access Level:
fwuHstSERFOptSFPNumber
SFP Num bers used as I ndex for Opt ical Port s
1 - 8
I nt eger32
Read Only
SFP N a m e
SNMP MIB:
Description:
Values:
fwuHstSERFOptSFPName
User defined SFP nam e - Opt ical Port Nam e
Alphanum eric Charact ers. Except as first charact er, t he underscore
( _) charact er is allowed. Must be bet ween 5 and 32 charact ers in
lengt h, wit h no spaces.
Default:
UnknownSFPNam e
Syntax:
Display St ring
Access Level: Read- Writ e
SFP Type
SNMP MIB:
Description:
Syntax:
Access Level:
fwuHstSERFOptSFPType
SFP Type - Opt ical Port Type
Opt icsType
Read Only
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 243
© 2011 ADC Telecom m unicat ions, I nc.
Prism MI B Obj ect s
SFP Tr a n sm ission Color
SNMP MIB:
Description:
Syntax:
Access Level:
fwuHstSERFOptSFPTxColor
SFP wavelengt h in nanom et er ( nm )
I nt eger32
Read Only
FW D La u n ch Pow e r
SNMP MIB:
Description:
Syntax:
Access Level:
fwuHstSERFOptFwdLaunchPowerMeas
Value of Host Transm it m easured opt ical power in dBm
DisplaySt ring
Read Only
REV Re ce ive Pow e r
SNMP MIB:
Description:
Syntax:
Access Level:
fwuHstSERFOptRevLaunchPowerMeas
Value of Host Receive m easured opt ical power in dBm
DisplaySt ring
Read Only
Mate Nam e
SNMP MIB:
Description:
Values:
Default:
Syntax:
Access Level:
fwuHstSERFOptMateName
Nam e of Host Mat es
I nherit s t he valid values from Host Nam e
NA
DisplaySt ring
Read Only
Mate I D
SNMP MIB:
Description:
Values:
Syntax:
Access Level:
fwuHstSERFOptMateId
I D ( num erical) of com panion Rem ot e Unit
See “ Unit I dent ificat ion” on page 43
NodeAddr1
Read Only
M a t e SFP I D
SNMP MIB:
Description:
Values:
Syntax:
Access Level:
fwuHstSERFOptMateSfpId
Slot I D of t he SFP used at rem ot e end
1 - 8
I nt eger32
Read Only
Page 244
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Using an SNMP I nt erface
Host SeRF ENET Switch Parameters
Et h e r n e t Por t N u m be r
SNMP MIB:
Description:
Values:
Syntax:
Access Level:
fwuHstSERFEthPortNumber
An ident ifier for each Et hernet port
1…12
Unsigned32
Read Only
Et h e r n e t Por t Type
SNMP MIB:
Description:
Syntax:
Access Level:
fwuHstSERFEthPortType
An ident ifier for t he t ype of Et hernet port
Enet Type
Read Only
H ost SFP I D
SNMP MIB:
Description:
Values:
Syntax:
Access Level:
fwuHstSERFEthPortSFPId
I dent ifier of SFP t o which t he Et hernet port connect s
1…8
I nt eger32
Read Only
Rx - byt e s
SNMP MIB:
Description:
Syntax:
Access Level:
fwuHstSERFEthPortRxBytes
Receive byt e count er
Count er64
Read Only
Rx - pa ck e t s
SNMP MIB:
Description:
Syntax:
Access Level:
fwuHstSERFEthPortRxPkts
Receive packet count er
Count er64
Read Only
Rx - fsc- e r r or s
SNMP MIB:
Description:
Syntax:
Access Level:
fwuHstSERFEthPortRxFcsErrors
Receive FCS error count er
Count er64
Read Only
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 245
© 2011 ADC Telecom m unicat ions, I nc.
Prism MI B Obj ect s
Re ce ive - m u lt ica st - pa ck e t s
SNMP MIB:
Description:
Syntax:
Access Level:
fwuHstSERFEthPortRxMulticastPkts
Receive m ult icast packet count er
Count er64
Read Only
Re ce ive - br oa dca st - pa ck e t s
SNMP MIB:
Description:
Syntax:
Access Level:
fwuHstSERFEthPortRxBroadcastPkts
Receive broadcast packet count er
Count er64
Read Only
Rx - fr a gm e n t e d- fr a m e s
SNMP MIB:
Description:
Syntax:
Access Level:
fwuHstSERFEthPortRxFragmtdFrames
Receive fragm ent s count er
Count er64
Read Only
Rx - j a bbe r - fr a m e s
SNMP MIB:
Description:
Syntax:
Access Level:
fwuHstSERFEthPortRxJabbersFrames
Receive j abber count er
Count er64
Read Only
Tx - byt e - cou n t e r
SNMP MIB:
Description:
Syntax:
Access Level:
fwuHstSERFEthPortTxByteCounter
Transm it byt e count er
Count er64
Read Only
Tx - pa ck e t s
SNMP MIB:
Description:
Syntax:
Access Level:
fwuHstSERFEthPortTxPkts
Transm it packet count er
Count er64
Read Only
Tx - m u lt ica st - pa ck e t s
SNMP MIB:
Description:
Syntax:
Access Level:
fwuHstSERFEthPortTxMulticastPkts
Transm it m ult icast packet count er
Count er64
Read Only
Page 246
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Using an SNMP I nt erface
Tx - br oa dca st - pa ck e t s
SNMP MIB:
Description:
Syntax:
Access Level:
fwuHstSERFEthPortTxBroadcastPkts
Transm it broadcast packet count er
Count er64
Read Only
Host SeRF FPGA Parameters
St a t u s
SNMP MIB:
Description:
Values:
fwuHstSERFFPGAStatus
Gives t he st at us if FPGA on SeRF Card
0 = PPC can t alk t o FPGA
1 = PPC cannot t alk t o FPGA
Default:
Syntax:
I nt eger
Access Level: Read Only
Host List of Remotes Parameters
M on it or I n de x
SNMP MIB:
Description:
Syntax:
Access Level:
fwuHMmonIndex
I ndex of t he Host m at e m onit or t able
I nt eger32
Read Only
Re m ot e I D
SNMP MIB:
Description:
Values:
Syntax:
Access Level:
fwuHMmonRmtID
I D ( num erical) of com panion Rem ot e Unit
See “ Unit I dent ificat ion” on page 43
NodeAddr1
Read Only
Re m ot e I P Addr e ss
SNMP MIB:
Description:
Syntax:
Access Level:
fwuHMmonRmtIPAddress
List of I P addresses of connect ed Rem ot e Unit ( s)
I pAddress
Read Only
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 247
© 2011 ADC Telecom m unicat ions, I nc.
Prism MI B Obj ect s
Host DART Module Parameters
Ca r d N u m be r
SNMP MIB:
Description:
Values:
Syntax:
Access Level:
fwuHstDARTNumber
A unique ident ifier for each DART Module Obj ect
Range 1 - 8
I nt eger
Read Only
Ca r d N a m e
SNMP MIB:
Description:
Values:
fwuHstDARTName
A user defined nam e for each DART Module
Alphanum eric Charact ers. Except as first charact er, t he underscore
( _) charact er is allowed. Must be bet ween 5 and 32 charact ers in
lengt h, wit h no spaces.
Description:
Unknown_DART
Syntax:
Display St ring
Access Level: Read- Writ e
Ba n d Type
SNMP MIB:
Description:
Values:
Default:
Syntax:
Access Level:
fwuHstDARTBandType
Band t ype of Host DART Module
See “ Band Types” on page 235.
-1
BAND- TYPE
Read Only
Pa ssba n d
SNMP MIB:
Description:
Values:
Default:
Syntax:
Access Level:
fwuHstDARTPassBand
Passband for t he select ed DART
SI ZE ( 0…40)
-1
OCTET STRI NG
Read- Writ e
Ope r a t in g M ode
SNMP MIB:
Description:
Syntax:
Access Level:
fwuHstDARTOperatingMode
Operat ing m ode of t he DART Module
ModeType
Read- Writ e
Page 248
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Using an SNMP I nt erface
D ive r sit y St a t u s
SNMP MIB:
Description:
Values:
fwuHstDARTDiversityStatus
Diversit y St at us of Host DART Module
0 = Non- diversit y
1 = Diversit y
Default:
Syntax:
I nt eger
Access Level: Read Only
For w a r d Ga in
SNMP MIB:
Description:
Default:
Syntax:
Access Level:
fwuHstDARTForwardGain
Prim ary Gain of Host DART Module
GainType
Read- Writ e
Re ve r se Ga in
SNMP MIB:
Description:
Values:
Default:
Syntax:
Access Level:
fwuHstDARTReverseGain
Prim ary Gain of Host DART Module
5…36, Unit s = dB, increm ent s 1dB
GainType
Read- Writ e
FPGA St a t u s
SNMP MIB:
Description:
fwuHstDARTFPGAStatus
Host DART FPGA St at us; indicat es whet her t he SeRF FPGA can t alk
t o t he DART FPGA
Values:
0 = SeRF FPGA can t alk t o DART FPGA
1 = SeRF FPGA cannot t alk t o DART FPGA
Default:
Syntax:
I nt eger
Access Level: Read Only
FPGA Pr ogr a m Ve r sion
SNMP MIB:
Description:
Syntax:
Access Level:
fwuHstDARTFPGAProgramVer
FPGA version on t he DART Module
Display St ring
Read Only
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 249
© 2011 ADC Telecom m unicat ions, I nc.
Prism MI B Obj ect s
RI AD C Pa r t N u m be r
SNMP MIB:
Description:
Syntax:
Access Level:
fwuHstDARTRIADCPartNumber
Host DART I nvent ory Dat a - ADC Part Num ber
Display St ring
Read Only
RI Se r ia l N u m be r
SNMP MIB:
Description:
Syntax:
Access Level:
fwuHstDARTRISerialNumber
Host DART I nvent ory Dat a - Serial Num ber
Display St ring
Read Only
RI D a t e Code
SNMP MIB:
Description:
Syntax:
Access Level:
fwuHstDARTRIDateCode
Host DART I nvent ory Dat a Code
Display St ring
Read Only
D ART RI H W Ve r sion
SNMP MIB:
Description:
Syntax:
Access Level:
fwuHstDARTRIHWVer
Host DART I nvent ory Dat a - HW Version
Display St ring
Read Only
Row St a t us
SNMP MIB:
Description:
Syntax:
Access Level:
fwuHstDARTRowStatus
The st at us of t his concept ual row
RowSt at us
Read- Creat e
Pe a k Ave r a ge I n pu t Pow e r Le ve l 1
SNMP MIB:
Description:
fwuHstDARTPeakInputPwrLvl1
Peak Average input Power Level1. For Diversit y syst em s, t his will be
NA.
Default:
NA
Syntax:
DisplaySt ring
Access Level: Read Only
Page 250
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Using an SNMP I nt erface
Pe a k Ave r a ge I n pu t Pow e r Le ve l 2
SNMP MIB:
Description:
fwuHstDARTPeakInputPwrLvl2
Peak Average input Power level2. For Diversit y syst em s, t his will be
NA.
Default:
NA
Syntax:
DisplaySt ring
Access Level: Read Only
M in Ave r a ge I n pu t Pow e r Le ve l 1
SNMP MIB:
Description:
fwuHstDARTPeakAvgInputPwrLvl1
Minim um Average I nput Power Level1. For Diversit y syst em s, t his
will be NA.
Default:
NA
Syntax:
DisplaySt ring
Access Level: Read Only
M in Ave r a ge I n pu t Pow e r Le ve l 2
SNMP MIB:
Description:
fwuHstDARTPeakAvgInputPwrLvl2
Minim um Average I nput Power Level2. For Diversit y syst em s, t his
will be NA.
Default:
NA
Syntax:
DisplaySt ring
Access Level: Read Only
Pe a k I n pu t Pow e r Le ve l 1
SNMP MIB:
Description:
Default:
Syntax:
Access Level:
fwuHstDARTMinAvgInputPwrLvl1
Peak I nput Power Level2. For Diversit y syst em s, t his will be NA.
NA
DisplaySt ring
Read Only
Pe a k I n pu t Pow e r Le ve l 2
SNMP MIB:
Description:
Default:
Syntax:
Access Level:
fwuHstDARTMinAvgInputPwrLvl2
Peak I nput Power Level2. For Diversit y syst em s, t his will be NA.
NA
DisplaySt ring
Read Only
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 251
© 2011 ADC Telecom m unicat ions, I nc.
Prism MI B Obj ect s
Pow e r Le ve l M ode
SNMP MIB:
Description:
Values:
fwuHstDARTInputPowerMode
DART power level Mode
0 = snapshot 
1 = m axHold
Default:
Syntax:
I nt eger
Access Level: Read- Writ e
Pow e r Le ve l M a x H old Re se t
SNMP MIB:
Description:
Values:
fwuHstDARTPwrLevelMaxHoldReset
Host DART I nput Power Level Max Hold Reset
- 1 = Not Applicable
0 = Norm al
1 = Reset
Default:
-1
Syntax:
I nt eger
Access Level: Read- Writ e
La st M a x H old Re se t Tim e
SNMP MIB:
Description:
Syntax:
Access Level:
fwuHstDARTLastMaxHoldResetTime
Dat e and Tim e of t he last m axHold reset t im e of t he Host DART
Dat eAndTim e
Read Only
I de n t ify RF Sou r ce
SNMP MIB:
Description:
Values:
fwuHstDARTInputSrc
I dent ifies whet her t he connect ion is t o BTS/ BDA
1 = BTS
2 = BDA
Default:
Syntax:
I nt eger
Access Level: Read- Writ e
Host System Card Parameters
RI AD C Pa r t N u m be r
SNMP MIB:
Description:
Syntax:
Access Level:
fwuHstSysCardRIADCPartNumber
Rm t I nvent ory Dat a - ADC Part Num ber
Display St ring
Read Only
Page 252
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Using an SNMP I nt erface
RI Se r ia l N um be r
SNMP MIB:
Description:
Syntax:
Access Level:
fwuHstSysCardRISerialNumber
Rm t I nvent ory Dat a - Serial Num ber
Display St ring
Read Only
RI D a t e Code
SNMP MIB:
Description:
Syntax:
Access Level:
fwuHstSysCardRIDateCode
Rm t I nvent ory Dat a - Dat e Code
Display St ring
Read Only
RI H W Ve r sion
SNMP MIB:
Description:
Syntax:
Access Level:
fwuHstSysCardRIHWVer
Rm t I nvent ory Dat a - Hardware Version
Display St ring
Read Only
1 0 M H z Re fe r e n ce Clock
SNMP MIB:
Description:
Values:
fwuHstSysCard10MhzRefClock
Syst em Card Reference clock
0- I nt ernal
1- ext ernal ref clock
Default:
Syntax:
I nt eger
Access Level: Read- Writ e
Clock Pr ior it y Le ve l
SNMP MIB:
Description:
Values:
Default:
Syntax:
Access Level:
fwuHstSysCardCPLevel
Syst em card m ast er clock priorit y level
1…14
14
I nt eger32
Read- Writ e
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 253
© 2011 ADC Telecom m unicat ions, I nc.
Prism MI B Obj ect s
Ou t pu t Re fe r e n ce Clock
SNMP MIB:
Description:
fwuHstSysCardOutputRefClock
Syst em Card Reference clock. Syst em Module support s only 10 MHz
and Syst em Board I I support s bot h 10 MHz and 30 MHz Clock out put .
Values:
0 = Off
1 = 10 MHz clock
2 = 30 MHz clock
Default:
1 for Host 
2 for I F Rem ot e
Syntax:
I nt eger
Access Level: Read- Writ e
RI H a r dw a r e Ge n e r a t ion
SNMP MIB:
Description:
Values:
fwuHstSysCardRIHWGen
Host Syst em Card Hardware Generat ion
0 = First Generat ion
1 = Second Generat ion
Default:
Syntax:
I nt eger
Access Level: Read Only
Remote Unit Parameters
Remote Parameters
N u m be r
SNMP MIB:
Description:
Values:
Syntax:
Access Level:
fwuRmtNumber
Num ber of t he connect ed Rem ot e Unit .
See “ Unit I dent ificat ion” on page 43
Unit I d2
Read Only
Nam e
SNMP MIB:
Description:
Values:
fwuRmtName
User defined nam e of t he Rem ot e Unit .
Alphanum eric Charact ers. Except as first charact er, t he underscore
( _) charact er is allowed. Must be bet ween 5 and 40 charact ers in
lengt h, wit h no spaces.
Syntax:
Display St ring
Access Level: Read- Writ e
Page 254
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Using an SNMP I nt erface
Ala r m St a t u s Su m m a r y
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtAlarmStatusSummary
Sum m ary of alarm st at us of t he ( connect ed) Rem ot e Unit .
Alarm Type
Read Only
Type
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtType
Type of Rem ot e.
unit Type
Read Only
Te m pe r a t u r e M e a su r e m e n t
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtTempMeasurement
Tem perat ure of each Rem ot e Unit in celsius.
Oct al St ring
Read Only
Pr ism Un it Re se t
SNMP MIB:
Description:
fwuPrismUnitReset
Boolean. Way t o reset t he Rem ot e Unit rem ot ely. Only applicable t o
URH Rem ot e Unit s ( URUs) .
Values:
0 = Norm al
1 = Reset
Default:
Default : 0
Syntax:
I nt eger
Access Level: Read- Writ e
Ca t a log St a t e
SNMP MIB:
Description:
Values:
Syntax:
Access Level:
fwuRmtCatalogState
Cat alog st at e of Rem ot e Unit .
This is used in t he Recovery of t he Rem ot e Unit
Cat alogType
Read Only
Ta ble Row St a t u s
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtGeneralTableRowStatus
The st at us of t his concept ual row.
RowSt at us
Read- Creat e
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 255
© 2011 ADC Telecom m unicat ions, I nc.
Prism MI B Obj ect s
D ART I d
SNMP MIB:
Description:
Values:
Syntax:
Access Level:
fwuUsrCommLinkTestDartId
To ident ify t he DART
1 - 8
Unsigned32
Read- Writ e
Prism Remote System Card
RI AD C Pa r t N u m be r
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtSysCardRIADCPartNumber
Rem ot e Unit I nvent ory Dat a: ADC Part Num ber.
Display St ring
Read Only
RI Se r ia l N u m be r
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtSysCardRISerialNumber
Rem ot e Unit I nvent ory Dat a: Serial Num ber
Display St ring
Read Only
RI D a t e Code
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtSysCardRIDateCode
Rem ot e Unit I nvent ory Dat a: Dat eCode Num ber
Display St ring
Read Only
RI H a r dw a r e Ve r sion
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtSysCardRIHWVersion
Rm t I nvent ory Dat a - Hardware Num ber
Display St ring
Read Only
1 0 M h z Re fe r e n ce Clock
SNMP MIB:
Description:
Values:
fwuRmtSysCard10MhzRefClock
Rem ot e Syst em Card Reference clock. I t can be int ernal or ext ernal.
0- I nt ernal
1- ext ernal ref clock
Description:
Syntax:
I nt eger
Access Level: Read Only
Page 256
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Using an SNMP I nt erface
Ou t pu t Re fe r e n ce Clock
SNMP MIB:
Description:
fwuRmtSysCardOutputRefClock
Rem ot e Syst em Card Reference clock. Syst em Board support s only
10 MHz and Syst em Board I I support s bot h 10 MHz and 30 MHz Clock
out put
Values:
0 - off
1 - clock10m hz
2 - clock30m hz
Default:
Syntax:
I nt eger
Access Level: Read- Writ e
RI H a r dw a r e Ge n
SNMP MIB:
Description:
Values:
fwuRmtSysCardRIHWGen
Rem ot e Syst em Card Hardware Generat ion
First Generat ion = 0
Second Generat ion = 1
Syntax:
I nt eger
Access Level: Read Only
Prism Remote SeRF General
Lin u x Ke r n e l Ve r sion
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtSERFLinuxKernelVer
Linux Kernel Version of t he rem ot e syst em .
Display St ring
Read Only
Linu x Boot Loa de r Ve r sion
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtSERFLinuxBootLoaderVer
Linux Boot loader Version of t he rem ot e syst em .
Display St ring
Read Only
Lin u x Fir st St a ge Boot Loa de r Ve r sion
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtSERFLinuxBootLoaderVer
Boot Loader1 Version of t he host syst em .
Display St ring
Read Only
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 257
© 2011 ADC Telecom m unicat ions, I nc.
Prism MI B Obj ect s
Com pa ct Fla sh SW Ve r sion
SNMP MIB:
Description:
Values:
fwuRmtSERFCompactFlashSWVer
Com pact Flash Soft ware Version of t he rem ot e syst em .
Form at of: aa.bb.cc.dd
where each of aa, bb, cc, dd m ust be bet ween 00 and 99
Syntax:
Display St ring
Access Level: Read Only
PPC H W M on it or SW Ve r sion
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtSERFPPCHWMonSWVer
Hardware m onit or process Soft ware Version of t he rem ot e syst em .
Display St ring
Read Only
PPC Applica t ion M on it or SW Ve r sion
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtSERFPPCAPPMonSWVer
Applicat ion m onit or process Soft ware Version of t he rem ot e syst em .
Display St ring
Read Only
PPC Age n t SW Ve r sion
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtSERFPPCSNMPAgentSWVer
SNMP agent Soft ware Version of t he rem ot e syst em .
Display St ring
Read Only
PPC M a t e M on it or SW Ve r sion
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtSERFPPCMATEMonSWVer
Mat e m onit or process Soft ware Version of t he rem ot e syst em .
Display St ring
Read Only
PPC EN ET M on it or SW Ve r sion
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtSERFPPCENETMonSWVer
ENET m onit or process Soft ware Version of t he rem ot e syst em .
Display St ring
Read Only
PPC FPGA M on it or SW Ve r sion
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtSERFPPCFPGAMonSWVer
FPGA m onit or process Soft ware Version of t he rem ot e syst em .
Display St ring
Read Only
Page 258
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Using an SNMP I nt erface
Se RF FPGA Ve r sion
SNMP MIB:
fwuRmtSERFFPGAVer
Syntax:
Display St ring
Access Level: Read Only
RI AD C Pa r t N u m be r
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtSERFRIADCPartNumber
Rem ot e SeRF I nvent ory - ADC Part Num ber.
Display St ring
Read Only
pTh r e a d Soft w a r e Ve r sion
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtpThreadSoftwareVer
The version num ber of pThread process.
DisplaySt ring
Read Only
W e b Se r ve r Soft w a r e Ve r sion
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtWebServerSwVer
The version num ber of web server.
DisplaySt ring
Read Only
RI H a r dw a r e Ve r sion
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtSERFPPCHWMonSWVer
Hardware m onit or process Soft ware Version of t he rem ot e syst em .
DisplaySt ring
Read Only
RI H a r dw a r e
SNMP MIB:
Description:
Values:
fwuRmtSERFRIHWGen
Rem ot e SeRF Hardware Generat ion.
First Generat ion = 0
Second Generat ion = 1
Syntax:
I nt eger
Access Level: Read Only
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 259
© 2011 ADC Telecom m unicat ions, I nc.
Prism MI B Obj ect s
Prism Remote SeRF Optics
Opt ics N um be r
SNMP MIB:
Description:
Values:
Syntax:
Access Level:
fwuRmtSERFOptSFPNumber
A unique ident ifier of each SFP
1 - 8
I nt eger
Read Only
Opt ics N a m e
SNMP MIB:
Description:
Values:
fwuRmtSERFOptSFPName
User defined nam e of each Rem ot e SFP.
Alphanum eric Charact ers. Except as first charact er, t he underscore
( _) charact er is allowed. Must be bet ween 5 and 32 charact ers wit h
no spaces.
Syntax:
Display St ring
Access Level: Read- Writ e
Opt ics Type
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtSERFOptSFPType
SFP Type - Opt ical Port Type.
Opt icsType
Read Only
Opt ics Color
SNMP MIB:
Description:
Values:
Syntax:
fwuRmtSERFOptSFPColor
SFP wavelengt h in nanom et er.
I nt eger32
Read Only
REV La u n ch Pow e r
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtSERFOptRevLaunchPowerMeas
Value of Rem ot e Receive m easured opt ical power in dbm .
Display St ring
Read Only
For w a r d Re ce ive Pow e r
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtSERFOptFwdLaunchPowerMeas
Value of Rem ot e Transm it m easured opt ical power in dbm .
Display St ring
Read Only
Page 260
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Using an SNMP I nt erface
Mate Nam e
SNMP MIB:
Description:
Values:
Syntax:
Access Level:
fwuRmtSERFOptMateName
Nam e of Rem ot e m at e.
I nherit s valid values from Rem ot e nam e
DisplaySt ring
Read Only
M a t e Un it I D
SNMP MIB:
Description:
Values:
Syntax:
Access Level:
fwuRmtSERFOptMateId
Num erical I D of com panion Rem ot e Unit .
See “ Unit I dent ificat ion” on page 43
NodeAddr1
Read Only
M a t e Un it SFP I D
SNMP MIB:
Description:
Values:
Syntax:
Access Level:
fwuRmtSERFOptMateSfpId
I dent ifier of SFP t o which t he m at e connect s .
1 - 8
I nt eger32
Read Only
M ode
SNMP MIB:
Description:
Values:
fwuRmtSERFIPEnable
Mode of I P enable RF carrier.
1= I PEnable 
2 = I P Disable
Default:
Syntax:
I nt eger
Access Level: Read- Writ e
SFP D ir e ct ion
SNMP MIB:
Description:
Values:
fwuRmtSERFOptMateSfpDir
I ndicat es whet her t he fiber is incom ing or out going on t his SFP port .
- 1 = Unknown
0 = I n
1 = Out
Syntax:
I nt eger
Access Level: Read Only
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 261
© 2011 ADC Telecom m unicat ions, I nc.
Prism MI B Obj ect s
Prism Remote SeRF ENET Switch
Et h e r n e t Por t N u m be r
SNMP MIB:
Description:
Values:
Syntax:
Access Level:
fwuRmtSERFEthPortNumber
A unique ident ifier for each Et hernet port .
Port num ber, which can be bet ween 1 and 12
Unsigned32
Read Only
Et h e r n e t Por t Type
SNMP MIB:
Description:
Values:
fwuRmtSERFEthPortType
An ident ifier for t he t ype of Et hernet port .
Port t ype: 
Net work port 
Craft port 
Managem ent port 
Swit ch port
Syntax:
ENET- TYPE
Access Level: Read Only
Et h e r n e t SFP I d
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtSERFEthSFPID
I dent ifier of SFP t o which t his et hernet port connect s t o.
I nt eger32
Read Only
Rx - byt e s
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtSERFEthPortRxBytes
Receive byt e count er.
Count er64
Read Only
Rx - pa ck e t s
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtSERFEthPortRxPkts
Receive packet count er.
Count er64
Read Only
Rx - fsc- e r r or s
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtSERFEthPortRxFscErrors
Receive FCS error count er.
Count er64
Read Only
Page 262
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Using an SNMP I nt erface
Re ce ive - m u lt ica st - pa ck e t s
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtSERFEthPortRxMulticastPkts
Receive m ult icast packet count er.
Count er64
Read Only
Re ce ive - br oa dca st - pa ck e t s
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtSERFEthPortRxBroadcastPkts
Receive broadcast packet count er.
Count er64
Read Only
Rx - fr a gm e n t e d- fr a m e s
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtSERFEthPortRxFragmtdFrames
Receive fragm ent s count er.
Count er64
Read Only
Rx - j a bbe r - fr a m e s
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtSERFEthPortRxJabbersFrames
Receive j abber count er.
Count er64
Read Only
Tx - byt e - cou n t e r
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtSERFEthPortTxByteCounter
Transm it byt e count er
Count er64
Read Only
Tx - pa ck e t s
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtSERFEthPortTxPkts
Transm it packet count er
Count er64
Read Only
Tx - m u lt ica st - pa ck e t s
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtSERFEthPortTxMulticastPkt
Transm it m ult icast packet count er
Count er64
Read Only
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 263
© 2011 ADC Telecom m unicat ions, I nc.
Prism MI B Obj ect s
Tx - br oa dca st - pa ck e t s
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtSERFEthPortTxBroadcastPkts
Transm it broadcast packet count er
Count er64
Read Only
Prism Remote SeRF FPGA
FPGA St a t u s
SNMP MIB:
Description:
Values:
fwuRmtSERFFPGAStatus
Rem ot e SeRF Card FPGA st at us.
0 = PPC can t alk t o FPGA
1= PPC cannot t alk t o FPGA
Default:
Syntax:
I nt eger
Access Level: Read Only
Prism Remote DART
Ca r d N u m be r
SNMP MIB:
Description:
Values:
Syntax:
Access Level:
fwuRmtDARTNumber
A unique ident ifier for each DART Module Obj ect .
1 - 8
Unsigned32
Read Only
Nam e
SNMP MIB:
Description:
Values:
fwuRmtDARTName
A user defined nam e for each DART Module.
Alphanum eric Charact ers. Except as first charact er, t he underscore
( _) charact er is allowed. Must be bet ween 5 and 32 charact ers in
lengt h, wit h no spaces.
Default:
Unknown_DART
Syntax:
DisplaySt ring
Access Level: Read- Writ e
Ba n d Type
SNMP MIB:
Description:
Values:
Default:
Syntax:
Access Level:
fwuRmtDARTBandType
Band t ype of t he Host DART
See “ Band Types” on page 235.
-1
BandType
Read Only
Page 264
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Using an SNMP I nt erface
Pa ssba n d
SNMP MIB:
Description:
Values:
Default:
Syntax:
Access Level:
fwuRmtDARTPassBand
Passband for t he select ed DART
Size of t he passband, which can be bet ween 0 and 40
-1
Oct et St ring
Read- Writ e
Ope r a t in g M ode
SNMP MIB:
Description:
Default:
Syntax:
Access Level:
fwuRmtDARTOperatingMode
Operat ing m ode of t he DART Module.
ModeType
Read- Writ e
D ive r sit y St a t u s
SNMP MIB:
Description:
Values:
fwuRmtDARTDiversityStatus
Diversit y St at us of Host DART Module.
1 = Diversit y 
0 = Non- diversit y
Default:
Syntax:
I nt eger
Access Level: Read- Writ e
For w a r d Ga in
SNMP MIB:
Description:
Default:
Syntax:
Access Level:
fwuRmtDARTForwardGain
Prim ary Gain in forward pat h of Rem ot e Unit DART Module.
GainType
Read- Writ e
Re ve r se Ga in
SNMP MIB:
Description:
Default:
Syntax:
Access Level:
fwuRmtDARTReverseGain
Prim ary Gain in reverse pat h of Rem ot e Unit DART Module.
GainType
Read Only
For w a r d D e la y
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtDARTForwardDelay
Rem ot e DART Module forward delay in Micro Seconds.
DelayType
Read- Writ e
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 265
© 2011 ADC Telecom m unicat ions, I nc.
Prism MI B Obj ect s
Re ve r se D e la y
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtDARTReverseDelay
Rem ot e DART Module reverse delay in Micro Seconds
DelayType
Read- Writ e
FPGA Pr ogr a m Ve r sion
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtDARTFPGAProgramVer
FPGA Version on t he Rem ot e Unit DART Module.
DisplaySt ring
Read Only
FPGA St a t u s
SNMP MIB:
Description:
fwuRmtDARTFPGAStatus
Rem ot e DART FPGA St at us. I t indicat es if t he SeRF FPGA can t alk t o
DART FPGA or not .
Values:
0 = SeRF FPGA can t alk t o DART FPGA
1 = SeRF FPGA cannot t alk t o DART FPGA
Default:
Syntax:
I nt eger
Access Level: Read Only
Te m pe r a t u r e M e a su r e m e n t
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtDARTTempMeas
Tem perat ure of Rem ot e DART Module.
DisplaySt ring
Read Only
AD C Pa r t N u m be r
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtDARTRIADCPartNumber
Rem ot e DART I nvent ory Dat a - ADC Part Num ber.
Display St ring
Read Only
Se r ia l N u m be r
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtDARTRISerialNumber
Rem ot e DART I nvent ory Dat a - Serial Num ber.
Display St ring
Read Only
Page 266
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Using an SNMP I nt erface
D a t e Code
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtDARTRIDateCode
Rem ot e DART I nvent ory Dat a - Dat eCode.
Display St ring
Read Only
RI H a r dw a r e Ve r sion
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtDARTRIHWVer
Rem ot e DART I nvent ory Dat a - HW Version.
Display St ring
Read Only
Ta ble Row St a t u s
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtDARTGeneralTableRowStatus
The st at us of t his concept ual row.
RowSt at us
Read- Creat e
Act u a l For w a r d D e la y
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtDARTActualForwardDelay
Act ual value of Forward delay for Rem ot e DART.
I nt eger32
Read Only
For w a r d D e la y - Low e r Bou n d
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtDARTForwardLowerboundDelay
Lower bound of Forward delay for Rem ot e DART
I nt eger32
Read Only
For w a r d D e la y - Uppe r Bou n d
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtDARTForwardUpperboundDelay
Upper bound of Forward delay for Rem ot e DART.
I nt eger32
Read Only
Re m ot e D ART Act u a l Re ve r se D e la y
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtDARTActualReverseDelay
Reverse delay for Rem ot e DART.
I nt eger32
Read Only
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 267
© 2011 ADC Telecom m unicat ions, I nc.
Prism MI B Obj ect s
Re ve r se D e la y - Low e r Bou n d
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtDARTReverseLowerboundDelay
Lower bound of Reverse delay for Rem ot e DART
I nt eger32
Read Only
Re ve r se D e la y - Uppe r Bou n d
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtDARTReverseUpperboundDelay
Upper bound of Reverse delay for Rem ot e DART
I nt eger32
Read Only
Pe a k I n pu t Pow e r Le ve l1
SNMP MIB:
Description:
Default:
Syntax:
Access Level:
fwuRmtDARTPeakInputPwrLvl1
Peak I nput Power Level1 t o a Rem ot e DART.
NA
DisplaySt ring
Read Only
Pe a k I n pu t Pow e r Le ve l2
SNMP MIB:
Description:
Default:
Syntax:
Access Level:
fwuRmtDARTPeakInputPwrLvl2
Peak I nput Power Level2 t o a Rem ot e DART.
NA
DisplaySt ring
Read Only
Pe a k Ave r a ge I n pu t Pow e r Le ve l 1
SNMP MIB:
Description:
Default:
Syntax:
Access Level:
fwuRmtDARTPeakAvgInputPwrLvl1
Peak Average I nput Power Level1 t o a Rem ot e DART.
NA
DisplaySt ring
Read Only
Pe a k Ave r a ge I n pu t Pow e r Le ve l 2
SNMP MIB:
Description:
Default:
Syntax:
Access Level:
fwuRmtDARTPeakAvgInputPwrLvl2
Peak Average I nput Power Level2 t o a Rem ot e DART.
NA
DisplaySt ring
Read Only
Page 268
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Using an SNMP I nt erface
M in im u m Ave r a ge I n pu t Pow e r Le ve l 1
SNMP MIB:
Description:
Default:
Syntax:
Access Level:
fwuRmtDARTMinAvgInputPwrLvl1
Minim um Average I nput Power Level1 t o a Rem ot e DART.
NA
DisplaySt ring
Read Only
M in im u m Ave r a ge I n pu t Pow e r Le ve l 2
SNMP MIB:
Description:
Default:
Syntax:
Access Level:
fwuRmtDARTMinAvgInputPwrLvl2
Minim um Average I nput Power Level2 t o a Rem ot e DART.
NA
DisplaySt ring
Read Only
Pow e r Le ve l M ode
SNMP MIB:
Description:
Values:
fwuRmtDARTInputPowerMode
Rem ot e DART I nput Power Level Mode.
0 = Snap Shot 
1 = Max Hold
Default:
Syntax:
I nt eger
Access Level: Read- Writ e
Pow e r Le ve l M a x H old Re se t
SNMP MIB:
Description:
Values:
fwuRmtDARTPwrLevelMaxHoldReset
Reset s t he Power Level Max Hold
- 1 = Not Applicable
0 = norm al
1 = reset
Default:
-1
Syntax:
I nt eger
Access Level: Read- Writ e
La st M a x H old Re se t Tim e
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtDARTLastMaxHoldResetTime
Dat e and Tim e of t he last m axHold reset t im e of Rem ot e.
DisplaySt ring
Read Only
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 269
© 2011 ADC Telecom m unicat ions, I nc.
Prism MI B Obj ect s
Re ve r se Pa t h Ga in M ode
SNMP MIB:
Description:
fwuRmtDARTReverseGainMode
To cont rol gain m ode on t he Reverse Pat h. Applicable t o bot h Classic
and Super DARTs.
Values:
0 - Norm al
1 - High
Default:
Syntax:
I nt eger
Access Level: Read- Writ e
Prism Remote LPA
LPA N u m be r
SNMP MIB:
Description:
Values:
Syntax:
Access Level:
fwuRmtLPANumber
A unique ident ifier for an LPA.
1 - 4
Unsigned32
Read Only
LPA Re se t
SNMP MIB:
Description:
Values:
fwuRmtLPAReset
Set t his obj ect t o a value of 1 t o cause LPA t o reset it self.
0 = norm al
1 = reset
Default:
Syntax:
I nt eger
Access Level: Read- Writ e
Ope r a t in g M ode
SNMP MIB:
Description:
Values:
fwuRmtLPAOpState
The operat ing m odes of Rem ot e Unit LPA
0 = Operat ing
1 = Offline
Default:
Syntax:
I nt eger
Access Level: Read Only
Page 270
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Using an SNMP I nt erface
LPA Cont r ol
SNMP MIB:
Description:
Values:
fwuRmtLPAControl
To cont rol t he operat ing m ode of Rem ot e Unit LPA.
0 = Norm al
1 = St andby
Default:
Syntax:
I nt eger
Access Level: Read- Writ e
M ode l N u m be r
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtLPAPartNum
Rem ot e LPA Part Num ber.
DisplaySt ring
Read Only
Se r ia l N u m be r
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtLPASerialNum
Rem ot e LPA Serial Num ber.
DisplaySt ring
Read Only
H a r dw a r e Ve r sion
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtLPAHWVer
Rem ot e LPA Hardware Version.
DisplaySt ring
Read Only
Soft w a r e Ve r sion
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtLPASWVer
Rem ot e LPA Soft ware Version.
DisplaySt ring
Read Only
D e scr ipt ion
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtLPADescr
Band t ype of Rem ot e LPA
DisplaySt ring
Read Only
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 271
© 2011 ADC Telecom m unicat ions, I nc.
Prism MI B Obj ect s
Prism Remote Power Detector
Pow e r D e t e ct or N u m be r
SNMP MIB:
Description:
Values:
Syntax:
Access Level:
fwuRmtPowerDetectorNumber
I ndex and a unique ident ifier for each power det ect or.
1 - 4
I nt eger32
Read Only
RF Pow e r Out put M e a su r e m e nt
SNMP MIB:
Description:
Values:
Syntax:
Access Level:
fwuRmtRFPowerOutputMeas
The value of Rem ot e RF Power Out put in dBm
Up t o 5 charact ers
Oct et St ring
Read Only
D u ple x e r RI Se r ia l N u m be r
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtPwrDetectorBoardRISerialNum
Power Det ect or I nvent ory - Serial Num ber.
DisplaySt ring
Read Only
D u ple x e r RI D a t e Code
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtPwrDetectorBoardRIDateCode
Power Det ect or I nvent ory - Dat e Code.
DisplaySt ring
Read Only
D u ple x e r RI H a r dw a r e Ve r sion
SNMP MIB:
Description:
Values:
Syntax:
Access Level:
fwuRmtPwrDetectorBoardRIHWVer
Power Det ect or I nvent ory - HW Version.
Up t o 8 Charact ers
Oct et St ring
Read Only
D u ple x e r RI AD C Pa r t N u m be r
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtPwrDetectorBoardRIADCPartNum
Power Det ect or I nvent ory - ADC Part Num ber.
DisplaySt ring
Read Only
Page 272
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Using an SNMP I nt erface
Syst e m VSW R M e a su r e m e n t
SNMP MIB:
Description:
Values:
Syntax:
Access Level:
fwuRmtSystemVswrMeas
Measured VSWR value
Up t o 8 Charact ers
Oct et St ring
Read Only
Prism Remote LNA/Duplexer
LN A N u m be r
SNMP MIB:
Description:
Values:
Syntax:
Access Level:
fwuRmtLNANumber
I ndex and an unique ident ifier for LNA Obj ect s.
Num ber t hat ident ifies an LNA and t hat can be from 1 t o 8
I nt eger32
Read Only
LN A Type
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtLNAType
Rem ot e LNA card t ype.
LnaType
Read Only
RI AD C Pa r t N u m be r
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtLNARIADCPartNumber
LNA I nvent ory Dat a - ADC Part Num ber.
Display St ring
Read Only
RI Se r ia l N um be r
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtLNARISerialNumber
LNA I nvent ory Dat a - Serial Num ber.
Display St ring
Read Only
RI D a t e Code
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtLNARIDateCode
LNA I nvent ory Dat a - Dat e Code.
Display St ring
Read Only
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 273
© 2011 ADC Telecom m unicat ions, I nc.
Prism MI B Obj ect s
RI H a r dw a r e Ve r sion
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtLNARIHWVer
LNA I nvent ory Dat a - HW Version.
DisplaySt ring
Read Only
D uple x e r t ype
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtDuplexerType
Duplexer hardware t ype.
DuplexerType
Read Only
Prism Remote RDI Card
RD I N u m be r
SNMP MIB:
Description:
Values:
Syntax:
Access Level:
fwuRmtRDINumber
I ndex and an ident ifier for each RDI .
Num ber t hat ident ifies an RDI and t hat can be from 1 t o 4
Unsigned32
Read Only
RI AD C Pa r t N u m be r
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtRDIRIADCPartNumber
RDI I nvent ory Dat a - ADC Part Num ber.
Display St ring
Read Only
RI Se r ia l N u m be r
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtRDIRISerialNumber
RDI I nvent ory Dat a - Serial Num ber.
Display St ring
Read Only
RI D a t e Code
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtRDIRIDateCode
RDI I nvent ory Dat a - Dat e Code.
DisplaySt ring
Read Only
Page 274
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Using an SNMP I nt erface
RI H a r dw a r e Ve r sion
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtRDIRIHWVer
RDI I nvent ory Dat a - HW Version.
Display St ring
Read Only
Prism Remote RSI Card
RI AD C Pa r t N u m be r
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtRSIRIADCPartNumber
Rem ot e I nvent ory Dat a - ADC Part Num ber.
Display St ring
Read Only
Se r ia l N u m be r
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtRSIRISerialNumber
Rem ot e I nvent ory Dat a - Serial Num ber.
Display St ring
Read Only
D a t e Code
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtRSIRIDateCode
Rem ot e I nvent ory Dat a - Dat e Code.
DisplaySt ring
Read Only
RI H a r dw a r e Ve r sion
SNMP MIB:
Description:
Syntax:
Access Level:
fwuRmtRSIRIHWVer
Rem ot e I nvent ory Dat a - Hardware Version.
Display St ring
Read Only
Re m ot e Ca pa cit y
SNMP MIB:
Description:
Values:
Default:
Syntax:
Access Level:
fwuRmtCapacity
The num ber of RF m odules t hat m ay be inst alled in t he Rem ot e Unit .
Num ber bet ween 1 and 4
Unsigned32
Read Only
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 275
© 2011 ADC Telecom m unicat ions, I nc.
Prism MI B Obj ect s
Common Managed Objects
Prism DART Mapping
I n de x
SNMP MIB:
Description:
Values:
Syntax:
Access Level:
fwuDARTMappingIndex
I ndex of DART Mapping Table.
Num ber bet ween 0 and 100
Unsigned32
Not Accessible
Un it I d
SNMP MIB:
Description:
Syntax:
Access Level:
fwuUnitID
I dent ifier for t he unit
HOSTNBR- TYPE
Read Only
Un it D ART I d
SNMP MIB:
Description:
Values:
Syntax:
Access Level:
fwuUnitDARTID
I dent ifier of DART on t he unit
Num erical value t hat can be from 1 t o 8
I nt eger32
Read Only
Un it SFP I d
SNMP MIB:
Description:
Values:
Syntax:
Access Level:
fwuUnitSFPID
I dent ifier of unit SFP connect ed t oward t he m at e DART ( out going) .
Num erical value t hat can be from 1 t o 8
I nt eger32
Read Only
Un it D ART Pa ssba n d
SNMP MIB:
Description:
Values:
Syntax:
Access Level:
fwuUnitDartPassBand
Band- Passband inform at ion of t he linked DART on t he Host side.
Num erical value t hat indicat es size, and t hat can be from 0 t o 40
OCTET STRI NG
Read Only
Page 276
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Using an SNMP I nt erface
Mate I d
SNMP MIB:
Description:
Values:
Syntax:
Access Level:
fwuMateID
I dent ifier of ( com panion) m at e unit
See “ Unit I dent ificat ion” on page 43
REMOTENBR- TYPE
Read Only
M a t e D ART I d
SNMP MIB:
Description:
Syntax:
Access Level:
fwuMateDARTId
I dent ifier of ( com panion) DART on m at e unit .
I nt eger32
Read Only
M a t e SFP I d
SNMP MIB:
Description:
fwuMateSFPId
I dent ifier of rem ot e side SFP connect ed t oward t he unit DART
( incom ing)
Syntax:
I nt eger32
Access Level: Read Only
M a t e D ART Pa ssba n d
SNMP MIB:
Description:
Syntax:
Access Level:
fwuMateDartPassbnd
Band- Passband inform at ion of t he linked DART on t he Mat e side.
OCTET STRI NG
Read Only
St a r t Tim e Slot on SFP
SNMP MIB:
Description:
fwuSfpStartTimeSlot
St art ing t im e slot on t he fiber t hat is carrying t he RF t raffic from unit
t o m at e DART Module.
Values:
1- 12
Syntax:
I nt eger32
Access Level: Read Only
En d Tim e Slot on SFP
SNMP MIB:
Description:
fwuSfpEndTimeSlot
Ending t im eslot on t he fiber t hat is carrying t he RF t raffic from unit
t o m at e DART Module.
Values:
1- 12
Syntax:
I nt eger32
Access Level: Read Only
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 277
© 2011 ADC Telecom m unicat ions, I nc.
Prism MI B Obj ect s
M a ppin g St a t u s
SNMP MIB:
Description:
Syntax:
Access Level:
fwuMappingStatus
St at us of DART m apping t able
RowSt at us
Set
Schedule System Link Test
Syst e m Lin k Te st M ode
SNMP MIB:
Description:
Values:
sysLinkTestMode
RLM Test for Syst em .
0 = Disable
1 = Enable
Syntax:
I NTEGER
Access Level: Read- Writ e
St a r t D a t e a n d Tim e
SNMP MIB:
Description:
Syntax:
Access Level:
sysLinkStartTime
The St art dat e and t im e of linking t est execut ion.
Dat eAndTim e
Read- Writ e
Re cu r r e n ce Tim e
SNMP MIB:
Description:
Values:
sysLinkRecurrenceTime
Recurrence of syst em link t est , in t erm s of days.
1 - 365
0 = don't recur
Syntax:
Unsigned32
Access Level: Read- Writ e
D ART Ba n d Type
SNMP MIB:
Description:
Values:
sysLinkDARTBandType
Band t ype ( t he RF DART t ype) of select ed unit s
See “ Band Types” on page 235.
Ent er 0 t o select all unit s.
Syntax:
BandType
Access Level: Read- Writ e
Page 278
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Using an SNMP I nt erface
D ART I d
SNMP MIB:
Description:
Values:
Syntax:
Access Level:
fwuSchLinkTestDartId
I n which slot t he DART resides.
1 - 8
I nt eger
Read- Writ e
SNMP Settings
V1 Tr a p Age n t Addr e ss Ove r r ide M ode
SNMP MIB:
Description:
Values:
fwuV1TrapAgentAddrOverrideMode
V1 t rap agent address override m ode.
0 = Disable
1 = Enable
Default:
Syntax:
I NTEGER
Access Level: Read- Writ e
V1 Tr a p Age n t Addr e ss Ove r r ide I P Addr e ss
SNMP MIB:
Description:
Syntax:
Access Level:
fwuV1TrapAgentAddrOverrideIPAddr
V1 t rap agent address overriding address
DisplaySt ring
Read- Writ e
SN M P Tr a p Re se n d I n t e r va l
SNMP MIB:
Description:
Values:
Syntax:
Access Level:
fwuSnmpTrapResendInterval
I nt erval in m inut es t hat m ust pass before t he t rap is resent
0 t o 1440, where 0 = Disable
I nt eger32
Read- Writ e
M a x im u m for SN M P Tr a p Re se n d
SNMP MIB:
Description:
Values:
Syntax:
Access Level:
fwuSnmpTrapResendMaximum
Maxim um num ber of t im es t rap will be resent wit h
0 t o 360
I nt eger32
Read- Writ e
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Disable = 0
Page 279
© 2011 ADC Telecom m unicat ions, I nc.
Prism MI B Obj ect s
Et h e r n e t M ode m W a k e Up
SNMP MIB:
Description:
Values:
fwuEthernetModemWakeUp
I f an ext ernal m odem is used, sends a “ wake up” m essage
0 = False
1 = True
Syntax:
I nt eger32
Access Level: Read- Writ e
Register SNMP Trap Manager
Row I n de x
SNMP MIB:
Description:
Syntax:
Access Level:
fwuTrapMgrRowId
I ndex for t his t able
I nt eger
Read- Writ e
Tr a p M a n ge r I P Addr e ss
SNMP MIB:
Description:
Values:
Syntax:
Access Level:
fwuTrapMgrIpAddress
I P Address of t he regist ered Trap m anager
Default = 127.0.0.1
I pAddress
Read- Writ e
List e n in g Por t
SNMP MIB:
Description:
fwuTrapMgrListeningPort
Port at which t he m anager list ens for t he t rap. This value m ust be set
by t he user before t he row st at us is m ade act ive. Ot herwise, an error
will be indicat ed.
Values:
162, or any ot her unreserved port
Default:
162
Syntax:
I nt eger
Access Level: Read- Writ e
Com m u n it y
SNMP MIB:
Description:
Values:
fwuTrapCommunity
Trap Com m unit y for t he m anager
Public
Privat e
Default:
Public
Syntax:
DisplaySt ring
Access Level: Read- Writ e
Page 280
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Using an SNMP I nt erface
Tr a p Ve r sion
SNMP MIB:
Description:
Values:
fwuTrapVersion
Version of SNMP used for t his t rap dest inat ion.
0 = V1
1 = V2c
2 = I nform
Default:
Syntax:
I nt eger
Access Level: Read- Writ e
Row St a t us
SNMP MIB:
Description:
Syntax:
Access Level:
fwuTrapMgrRowStatus
The st at us of t his concept ual row.
RowSt at us
Read- Creat e
Geographic Locations
GEO Objects
Ge o H e a r t be a t Tim e r
SNMP MIB:
Description:
Values:
Default:
Syntax:
Access Level:
fwuGeoHeartbeatTimer
Heart beat can be sent at t he t im er specified here in m inut es
Num ber t hat represent s m inut es, t hat can be from 1 t o 30
20
I nt eger32
Read Only
GEO Table Objects
I n de x
SNMP MIB:
Description:
Values:
Syntax:
Access Level:
fwuGeoIndex
I ndex of Geo t able.
Num ber t hat can be from 0 t o 64
Display St ring
Read- Writ e
Ge o La t it ude
SNMP MIB:
Description:
Syntax:
Access Level:
fwuGeoLatitude
I dent ifies t he Lat it ude of a Rem ot e Unit .
Lat AndLong
Read- Writ e
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 281
© 2011 ADC Telecom m unicat ions, I nc.
Prism MI B Obj ect s
Ge o Lon git u de
SNMP MIB:
Description:
Syntax:
Access Level:
fwuGeoLongitude
I dent ifies t he Longit ude of a Rem ot e Unit .
Lat AndLong
Read- Writ e
Ge o Re m ot e N a m e
SNMP MIB:
Description:
Syntax:
Access Level:
fwuGeoRmtName
Derived from fwuRmtName.
Display St ring
Read Only
Ge o St a t u s
SNMP MIB:
Description:
Values:
fwuGeoStatus
St andard SNMP row st at us for t his t able.
0 = not Present 
1 = act ive
2 = inact ive
Syntax:
I nt eger
Access Level: Read Only
Managed Objects for Traps
Prism Input Contact Alarm Management Table
Un it I nde x
SNMP MIB:
Description:
Values:
Syntax:
Access Level:
fwuUnitIndex
The num ber of unit connect ed.
See “ Unit I dent ificat ion” on page 43
NodeAddr1
Read Only
Ala r m Code
SNMP MIB:
Description:
Values:
fwuSYstemAlarmCode
An alphanum eric code t hat uniquely ident ifies an alarm / fault .
Each alarm / fault has a unique alphanum eric code. See
“ Troubleshoot ing Alarm s” on page 185 or use t he “ I ndex of Alarm s”
on page 313 t o find t he page num ber for a specific alarm descript ion,
which includes t he alarm code.
Syntax:
Unsigned32
Access Level: Read Only
Page 282
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Using an SNMP I nt erface
Con t a ct Ala r m
SNMP MIB:
Description:
Syntax:
Access Level:
fwuContactAlarm
Hardware Assigned Nam e
Display St ring
Read Only
Se ve r it y
SNMP MIB:
Description:
Values:
fwuContactAlarmSeverity
Severit y of t he alarm
2= Minor
3 = Maj or
Default:
Minor
Syntax:
Unsigned I nt eger
Access Level: Read- Writ e
M ode
SNMP MIB:
Description:
Values:
fwuContactAlarmMode
Mode of t he Alarm
1= Norm ally Closed
2 = Norm ally Open
Default:
Syntax:
Unsigned I nt eger
Access Level: Read- Writ e
Ala r m N a m e
SNMP MIB:
Description:
Values:
fwuContactAlarmName
User Assigned Nam e
Alphanum eric Charact ers. Except as first charact er, t he underscore
( _) charact er and spaces are allowed. Must be 5 t o 40 charact ers in
lengt h.
Default:
Blank ( em pt y st ring)
Syntax:
Display St ring
Access Level: Read- Writ e
Con t a ct Ala r m En a ble
SNMP MIB:
Description:
Values:
fwuContactAlarmEnable
Enable/ Disable t he cont act alarm
1 = Enabled 
0 = Disabled
Default:
Enabled
Syntax:
Unsigned I nt eger
Access Level: Unsigned I nt eger
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 283
© 2011 ADC Telecom m unicat ions, I nc.
Prism MI B Obj ect s
System Active Alarm Table
Ala r m Se qu e n ce n u m be r
SNMP MIB:
Description:
Values:
Syntax:
Access Level:
fwuSystemAlarmSequenceNumber
I ndex and unique I D for each t rap in Alarm Table.
I ndex of t he Alarm Table
Unsigned32
Not Accessible
Un it N ode Addr e ss
SNMP MIB:
fwuSystemAlarmTrapNodeAddress
Syntax:
Unit I d2
Access Level: Read- Writ e
Syst e m La be l
SNMP MIB:
Description:
Syntax:
Access Level:
fwuSystemlabel
Syst em Nam e or Host nam e
DisplaySt ring
Read Only
Re m ot e N a m e for Ala r m
SNMP MIB:
Description:
Syntax:
Access Level:
fwuSystemAlarmRmtName
Rem ot e nam e, where t he alarm originat ed.
DisplaySt ring
Read Only
Re m ot e Type for Ala r m
SNMP MIB:
Description:
Syntax:
Access Level:
fwuSystemAlarmRmtType
I dent ifies t he t ype of t he Rem ot e ( PRU or URU)
Unit Type
Read Only
M odu le Type for Ala r m
SNMP MIB:
Description:
fwuSystemAlarmModuleType
Hardware m odule t ype, where t he alarm has originat ed like . SeRF,
DART, SFP, LPA, LNA.
Syntax:
ModuleType
Access Level: Read Only
Page 284
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Using an SNMP I nt erface
M odu le N um be r for Ala r m
SNMP MIB:
Description:
Values:
Syntax:
Access Level:
fwuSystemAlarmModuleNumber
Hardware m odule num ber, where t he alarm has originat ed.
Bet ween 1 and 8
Unsigned32
Read Only
M odu le N a m e for Ala r m
SNMP MIB:
Description:
Syntax:
Access Level:
fwuSystemAlarmModuleName
Nam e of hardware m odule where t rap originat ed.
DisplaySt ring
Read Only
Ala r m Se ve r it y
SNMP MIB:
Description:
Syntax:
Access Level:
fwuSystemAlarmSeverity
Severit y of t he alarm
Alarm Type
Read Only
Ala r m Pa ss Ba n d
SNMP MIB:
Description:
fwuSystemAlarmRFBand
Describes t he Band t hat m ay be affect ed due t he raised alarm PCS,
GSM, AWS.
Syntax:
DisplaySt ring
Access Level: Read Only
Ala r m Tim e
SNMP MIB:
Description:
Syntax:
Access Level:
fwuSystemAlarmTimeStamp
Tim e at t rap in raised.
Syst em Dat eand Tim e
Read Only
Ala r m Code
SNMP MIB:
Description:
Values:
fwuSystemAlarmCode
An alphanum eric code t hat uniquely ident ifies an alarm / fault .
Each alarm / fault has a unique alphanum eric code. See
“ Troubleshoot ing Alarm s” on page 185 or use t he “ I ndex of Alarm s”
on page 313 t o find t he page num ber for a specific alarm descript ion,
which includes t he alarm code.
Syntax:
Unsigned32
Access Level: Read Only
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 285
© 2011 ADC Telecom m unicat ions, I nc.
Prism MI B Obj ect s
Ala r m H ost N u m be r
SNMP MIB:
Description:
Syntax:
Access Level:
SystemAlarmHstNbr
Num ber ident ifying t he host in t he syst em
Unsigned32
Read Only
An a log N ode Addr e ss
SNMP MIB:
Description:
Syntax:
Access Level:
fwuSystemAlarmAnalogAddress
Analog Port ion of t he node address
Unit I D3
Read Writ e
Alarm Management Table
Ala r m Code
SNMP MIB:
Description:
Values:
fwuSystemAlarmCode
An alphanum eric code t hat uniquely ident ifies an alarm / fault .
See “ Troubleshoot ing Alarm s” on page 185 or use t he “ I ndex of
Alarm s” on page 313 t o find t he page num ber for a specific alarm
descript ion, which includes t he alarm code.
Syntax:
Unsigned32
Access Level: Read Only
Ala r m Con t r ol
SNMP MIB:
Description:
Values:
fwuSystemAlarmManageable
I ndicat es t he abilit y t o Enable or Disable alarm
Enable = 1
Disable = 0
Syntax:
Updat ed
Access Level: Read Only
Ala r m Th r e sh old
SNMP MIB:
Description:
Values:
fwuSystemAlarmThreshold
The t hreshold at which t he alarm is raised ( Whenever applicable)
See “ Troubleshoot ing Alarm s” on page 185 or use t he “ I ndex of
Alarm s” on page 313 t o find t he page num ber for a specific alarm
descript ion, which includes t he alarm t hreshold, if any.
Syntax:
DisplaySt ring
Access Level: Read Only
Page 286
© 2011 ADC Telecommunications, Inc
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Using an SNMP I nt erface
Ala r m e d M odu le
SNMP MIB:
Description:
Values:
fwuSystemAlarmModType
I dent ifies t he m odule t ype t hat raised t he alarm .
SeRF
DART
LPA
LNA
Power Det ect or
SFP
Syntax:
I nt eger32
Access Level: Read Only
Alarm Enable Table
Ala r m Code
SNMP MIB:
Description:
Values:
fwuSystemModuleAlarmcode
An alphanum eric code t hat uniquely ident ifies an alarm / fault .
See “ Troubleshoot ing Alarm s” on page 185 or use t he “ I ndex of
Alarm s” on page 313 t o find t he page num ber for a specific alarm
descript ion, which includes t he alarm code.
Syntax:
Unsigned32
Access Level: Read Only
N ode Addr e ss
SNMP MIB:
fwuSystemTrapNodeAddress
Syntax:
Unit I d2
Access Level: Read Only
Ala r m e d M odu le N um be r
SNMP MIB:
Description:
Values:
fwuSystemAlarmModuleNo
I dent ifies t he specific m odule t ype t hat raised t he alarm .
SeRF
DART
LPA
LNA
Power Det ect or
SFP
Syntax:
Unsigned32
Access Level: Read Only
FlexWave Prism Elem ent Managem ent Syst em 7.1 User Manual
ADCP- 77- 177 • I ssue 1 • July 2011
Page 287
© 2011 ADC Telecom m unicat ions, I nc.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : TE106558
Create Date                     : 2011:12:06 13:34:35-08:00
Modify Date                     : 2011:12:06 13:37:58-08:00
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2011:12:06 13:37:58-08:00
Creator Tool                    : FrameMaker 7.1
Format                          : application/pdf
Title                           : ADC FlexWave Prism Element Management System 7.1 User Manual
Creator                         : TE106558
Document ID                     : uuid:318179ef-dc61-48d7-876b-d832bb15e73e
Instance ID                     : uuid:64b0ea74-42f3-4740-816b-05149292ecac
Producer                        : Acrobat Distiller 9.4.5 (Windows)
Page Count                      : 178

EXIF Metadata provided by EXIF.tools