ADC Telecommunications RPT080AA ADC's In-Building Wireless Repeater BDA - Cellular User Manual 2

ADC Telecommunications Inc ADC's In-Building Wireless Repeater BDA - Cellular 2

Contents

User manual 2

www.adc.com • +1-952-938-8080 • 1-800-366-3891Spec SheetIn-building Wireless Repeaters850 MHz Cellular and 1900 MHz PCSADC’s new in-building repeater product line offers powerful and cost-effective solutions to enhance indoor coverage for small to medium-size enterprise venues. This simple-to-use device is optimal for augmenting RF coverage in offices buildings, retail stores, warehouses, and other facilities between 50,000 to 100,000 square feet. The repeater features a compact design, blends easily into any facility, and is easy to set up through a simple GUI interface. The device offers the flexibility to program band selection and optimizes alarm and performance settings as desired. The repeater may also be used in conjunction with a distributed antenna system (DAS).Benefits:Low maintenance RF repeater system - set it and forget about it Band selectivity for Cellular & PCS • Choose either a 5MHz block, a 15MHz block or any combination of a 5 & 15MHz block: A, D, B, E, F and C • Choose either Cellular A, A’, A“ or B and B’Excellent selectivity, each band has discrete IF SAW filters to mitigate interferenceEasy installationUser-friendly GUI interfaceProvides product performance status via LED lights & optional enhanced alarm and management through on-board modem••••••
7/07 • 105105AE In-building Wireless RepeatersIn-building Wireless Repeaters850 MHz Cellular and 1900 MHz PCS2www.adc.com • +1-952-938-8080 • 1-800-366-3891System Description The repeater transmits RF in both directions to provide indoor wireless coverage. The device is connected via coax to a donor antenna that is typically located on a rooftop or external wall of a building, directed at the donor cell-site. The repeater is mounting inside the building and distributes the RF over coax to an indoor antenna located in the desired coverage area.Typical InstallationGUI FeaturesAutomatic Level Control (ALC)The system will control the output power to maintain the stability and protect the unit.Sleep ModeMode is activated when the reverse output RF power shows below -65dBm for over 3 minutes. The system re-activates to the wake up mode if the signal reaches over -65dBm. Band SelectionThe BDA offers programmable band selection.Isolation CheckThere is isolation check for the forward path and reverse path when the system is set up and powered on.User-friendly Interface USB connection allows you to control; • sleep mode • band selection • on/off system controlsOver Power Shut DownThe system can detect if there is excessive power and will shut down to protect the unit and will automatically resume operation when normal power levels are reached.FPO
7/07 • 105105AE In-building Wireless RepeatersIn-building Wireless Repeaters850 MHz Cellular and 1900 MHz PCS3www.adc.com • +1-952-938-8080 • 1-800-366-3891Typical SpecificationsRF SPECIFICATION Operating Frequency for the 1900 MHz Down Link: 1930-1990 MHz Up Link: 1850-1910 MHz 5MHz, 15MHz, or a combination of a 5 & 15MHz selectable Operating Frequency for the 850 MHz Down Link: 869-894 MHz Up Link: 824-849 MHz A, A’, A’’ OR B, B’ selectable Output Power: +13dBm Gain: 60dB Flatness: +0dB, -4dB Full Band Out of Band Gain: 45dB Offset 1MHz 35dB Offset 5MHzNOISE FIGURE Up Link: 5dB max VSWR: 1.5 max Frequency Stability: ±0.05ppM max ALC: 20dB min Gain Control Range: 10dB min 1dB StepACPR CDMA 10FA: 45dBc @ 885KHz 50dBc @ 1.98MHz Delay: 5usec max Supply Voltage: 8 V AC 110~220V to DC 8V SMPS AdaptorCurrent Consumption: 3A max DC 8V Current ConsumptionENVIRONMENTAL Operating Temperature: -5°C ~ +45°C Humidity 85%INDICATORS/CONTROLS USB Port: Gain, ALC Level Setting, Alarm Sleep Mode: Up Link non signal (below-65dBm): Off Input over -65dBm: On (in 1 sec) Oscillation Check: Observation Down Link LED: Shut Down +16dBm Sleep Mode: (U/L, D/L) Shutdown: (U/L, D/L) Oscillation: (D/L) Power ALC On/Off: Setting from GUI RF Connector: N Type (Donor ANT): Service ANT: SMA
Website: www.adc.comFrom North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080 Fax: +1-952-917-3237 • For a listing of ADC’s global sales office locations, please refer to our website.ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101Specifications published here are current as of the date of publication of this document. Because we are continuously improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc. views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or features contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer105105AE 7/07 Original © 2007 ADC Telecommunications, Inc. All Rights ReservedSpec Sheet

Navigation menu