ADC Telecommunications S2195-011 InterReach Spectrum Remote Access Unit User Manual 77222p2 Test

Download:
Mirror Download [FCC.gov]
Document ID	2243777
Application ID	c6qdMNpdDPO2LqCLrOhPNw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	154.07kB (1925907 bits)
Date Submitted	2014-04-16 00:00:00
Date Available	2014-05-15 00:00:00
Creation Date	2017-10-23 05:04:13
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-23 05:04:13
Document Title	77222p2_Test.fm
Document Creator	PScript5.dll Version 5.2.2
Document Author:	te106558

InterReach Spectrum™
Remote Access Unit
Installation Guide
TECP-77-222 · Issue 2 · March 2014
This installation guide provides installation instructions for )nterReach Spectrum® Remote Access Units RAUs .
Main Remote Access Unit
Secondary Remote Access Unit
Preliminary - for standards compliance testing only.
Not for distribution to customer.
© 2014 TE Connectivity, Inc. All Rights Reserved. Information contained in this document is company private to TE Connectivity Ltd., and shall not be modified, used,
copied, reproduced or disclosed in whole or in part without the written consent of TE.
FlexWave, FlexWave Prism, InterReach Spectrum, InterReach Unison, Universal Radio Head, TE Connectivity, and TE connectivity (logo) are trademarks. All other logos,
products and/or company names referred to herein might be trademarks of their respective owners.
Contents herein are current as of the date of publication. TE reserves the right to change the contents without prior notice. Should the content of printed user
documentation shipped with product differ from documentation provided on a product CD (inclusive of the associated Help modules), the printed user documentation
supersedes the documentation on the product CD. In no event shall TE be liable for any damages resulting from loss of data, loss of use, or loss of profits, and TE further
disclaims any and all liability for indirect, incidental, special, consequential or other similar damages. This disclaimer of liability applies to all products, publications and
Table lists the standard RAUs that are supported in this document.
Table 1.
Catalog Number
Supported Spectrum Standard Remote Access Units
Description
Standard RAUs
SP T‐ M1‐8519‐ 1
Spectrum, 850‐1900 Main RAU
SP T‐ S1 ‐ 8519‐ 22
Spectrum, 850 Path 2‐1900 Path 2 Secondary RAU
SP T‐ S1 ‐ 8090‐ 1*
Spectrum, 800‐900 SMR Secondary RAU
SP T‐ S1 ‐ 80AWS ‐ 1*
Spectrum, 800‐2100AWS Path 1 Secondary RAU
SP T‐ S1 ‐ 8019‐ 22*
Spectrum, 800 Path 2‐1900 Path 2 Secondary RAU
SP T‐ S2 ‐ 70AWS ‐ 1‐S I S O
Spectrum, 700 SISO‐2100AWS Path 1 SEC RAU, UpperC‐LowerABC
SP T‐ S2 ‐ 70AWS ‐ 22‐ S I S O
Spectrum, 700 Path 2 SISO‐2100AWS Path 2 SEC RAU, UpperC‐LowerABC
SP T‐ S1 ‐ 7070‐ 1‐M IMO
Spectrum, 700 MIMO Secondary RAU, UpperC‐LowerABC
SP T‐ M1‐AWS19‐ 11
Spectrum, 2100AWS Path 1‐1900 Path 1 Main RAU
SP T‐ S1 ‐ AWS19‐ 12
Spectrum, 2100AWS Path 1‐1900 Path 2 Secondary RAU
SP T‐ S1 ‐ 2121‐ 1‐M IMO
Spectrum, 2100AWS MIMO Secondary RAU
High Power RAUs
SP T‐ M3‐8019‐ 31‐ HP *
Spectrum, 800 Path 3 ‐ 1900 HP Path 1 Main RAU
SP T‐ M3‐8519‐ 11‐ HP
Spectrum, 850 Path 1‐1900 HP Path 1 Main RAU
SP T‐ S3 ‐ 2626‐ 12‐H P
Spectrum, 2600HP Path 1 ‐ 2600HP Path 2 Secondary RAU
SP T‐ S3 ‐ 70AWS ‐ 11‐ H P
Spectrum, 700 Path 1 uC/LABC‐AWS HP Path 1 Secondary RAU
SP T‐ S3 ‐ 70AWS ‐ 22‐ H P
Spectrum, 700 Path 2 uC/LABC‐AWS HP Path 2 Secondary RAU
SP T‐ S3 ‐8019‐ 22‐H P*
Spectrum, 800 Path 2‐1900 HP Path 2 Secondary RAU
SP T‐ S3 ‐ 8519‐ 22‐H P SPT‐
Spectrum, 850 Path 2 ‐ 1900 HP Path 2 Secondary RAU
S3‐8019‐22‐HP
* This R A U is C l as s B S i g na l Booster; s ee “Part 90 Signal Boosters” on page 26.
Revision History
Issue
Document Date
Technical Updates
February 2013
Initial release.
March 2014
• Adds support for the 2600HP Path 1 ‐ 2600HP Path 2 Secondary RAU; the 800 Path 3 ‐ 1900 HP
Path 1 Main RAU, and the Path 2‐1900 HP Path 2 Secondary RAU.
• Adds torque information; see “Connect the IFEU to the MRAU” on page 11 and “Connect the
MRAU to SRAUs” on page 12.
Document Cautions and Notes
Two types of messages, identified below, appear in the text:
CAUTION!
Cautions indicate operations or steps that could cause personal injury, induce a safety problem in a managed device,
destroy or corrupt information, or interrupt or stop services.
NOTE:
Notes contain information about special circumstances.
Page 2
©2014
TE Connectivity Ltd.
InterReach Spectrum Remote Access Unit Installation Guide ‐ Preliminary Not for Distribution
TECP‐77‐222 Issue 2 • 300001759666 Rev B • March 2014
PRODUCT OVERVIEW
)nterReach Spectrum supports up to bands in a single system. Each antenna location supports those bands in
modular, group pairings. Each location includes a Main Remote Access Unit MRAU that can power up to three
additional Secondary RAUs SRAUs , each of which support two power amplifier pairs for a total of eight
amplifiers. MRAUs and SRAUs are grouped logically based on common service provider groupings and include:
M)MO,
SMR,
S)SO/AWS, and
/AWS. Adding frequency is as simple as
plugging in an SRAU to the existing MRAU see Table on page
through Table on page
in Specifications .
RAUs are available in two different output power options: Standard and (igh Power. These can be mixed and
matched on a system to meet the specific needs of a venue.
Since Spectrum can be configured to support as many as four cascaded runs of sixteen total Expansion Module
Groups, the system configuration possibilities are seemingly endless and can scale to single systems that include
as many as
MRAU locations, with each of those locations supporting between one and eight RF bands. And
each of those band locations offers
dBm P dB or
dBm P dB of output power based on selecting
standard or (igh Power (P RAUs.
The system may be scaled to add new bands or RAU location sites as‐needed and offers great service flexibility
and performance relative to shared, wide‐band amplifier systems. Each service provider may control their band
of interest and enjoy the predictability in consistent service at each RAU location independent of what other
operators are doing or the length the signal travels to the service area.
The RAUs are typically mounted above ceiling tiles or in out‐of‐sight locations as close as possible to the service
area.
InterReach Spectrum Remote Access Unit Installation Guide ‐ Preliminary Not for Distribution
TECP‐77‐222 Issue 2 • 300001759666 Rev B • March 2014
©2014
Page 3
TE Connectivity Ltd.
Figure illustrates how RF and )F signals are sent between Spectrum units and modules.
NOTE:
All FWD ports on all Modules are color‐coded red and all REV ports are color‐coded blue, which makes the DRU, IFEU,
and RAU cabling process easier to complete.
RF
DART
SMR900
HOST
FWD 935-940
REV 896-901
REV
RF OUT
PWR
STATUS
RF DART
REV
RF OUT
PWR
STATUS
HOST
REV
RF OUT
HOST
SMR900
FWD 935-940
REV 896-901
Host
RF DART
SMR900
FWD 935-940
REV 896-901
FWD
RF IN
FWD NOT TO
EXCEED +5 dBm
PWR
STATUS
FWD
RF IN
FWD NOT TO
EXCEED +5 dBm
RF DART
HOST
SMR900
FWD 935-940
REV 896-901
REV
RF OUT
FWD
RF IN
PWR
STATUS
FWD NOT TO
EXCEED +5 dBm
FWD
RF IN
FWD NOT TO
EXCEED +5 dBm
HOST
SYSTEM II
RF
IF DART
REMOTE
XXXXXXXXXX
BW XX MHz
FWD
IF OUT
PWR
IF
DART
XXXXXXXXXX
REMOTE
FWD
IF OUT
REMOTE
PWR
REV
IF IN
STATUS
IF
DART
XXXXXXXXXX
REMOTE
BW XX MHz
BW XX MHz
FWD
IF OUT
DRU
IF DART
XXXXXXXXXX
BW XX MHz
REV
IF IN
STATUS
PWR
FWD
IF OUT
REV
IF IN
STATUS
PWR
REV
IF IN
STATUS
REMOTE
SYSTEM II
IF
IFEU
Power
Supply
MRAU
REV IF OUT
REV SECONDARY PORTS
LINK
STATUS
FWD SECONDARY PORTS
IF
RF
FWD IF IN
IF
RF
SRAU
SECONDARY
SECONDARY
REV
FWD
LINK
SECONDARY
REV
Omni
Antenna
STATUS
LINK STATUS
SECONDARY
FWD
NOTE: Units shown are not to scale.
Figure 1. REV and FWD Signals for the RAU
NOTE:
Page 4
©2014
This book refers to the Omni Antenna (4214‐0727), which is the antenna that TE Connectivity recommends. Other
antennas may be used. For further information on the Omni Antenna, see “Omni Antenna Specifications” on page 25.
TE Connectivity Ltd.
InterReach Spectrum Remote Access Unit Installation Guide ‐ Preliminary Not for Distribution
TECP‐77‐222 Issue 2 • 300001759666 Rev B • March 2014
Main Remote Access Units
The Main Remote Access Unit MRAU receives FWD )F signals from an )F Expansion Unit )FEU , which is part
of the Spectrum Expansion Module Group, using  CATV cable. The MRAU converts the )F signals to RF and
sends them to a passive RF antenna using  coaxial cable. The MRAU also receives configuration information
and power from and sends its status information to the )FEU.
The MRAU receives REV RF signals from a passive RF antenna using
)F and sends them to the )FEU using  CATV cable.
 coaxial cable. )t converts the signals to
MRAU Ports, Cable, and Connectors
REV IF OUT
REV SECONDARY PORTS
LINK
STATUS
FWD SECONDARY PORTS
FWD IF IN
Ref #
Component
Device
Function
RF SubMiniature version A
(SMA) cable (1)
50 RF SMA‐to‐SMA cable Connects two RF bands together when there is only
one N‐type connector on the RAU.
Antenna port(s)
50 N‐type connector
Connects to an antenna. See Table 2 on page 9.
FWD IF IN connector
F connector port
Connects to the IFEU FWD Module IF OUT connector
via CATV cable.
FWD SECONDARY PORTS (1 ‐ 3)
F connector ports
Connect to a SRAU SECONDARY FWD connector via
CATV cable.
REV SECONDARY PORTS (1 ‐ 3)
F connector ports
Connect to a SRAU SECONDARY REV connector via
CATV cable.
REV IF OUT connector
F connector port
Connects to the IFEU REV Module IF IN connector via
CATV cable.
(1) The AWS/PCS MRAUs do NOT have an RF SMA cable—they have two Antenna ports.
InterReach Spectrum Remote Access Unit Installation Guide ‐ Preliminary Not for Distribution
TECP‐77‐222 Issue 2 • 300001759666 Rev B • March 2014
©2014
Page 5
TE Connectivity Ltd.
MRAU LEDs
REV IF OUT
REV SECONDARY PORTS
LINK
Ref #
LED
STATUS
FWD SECONDARY PORTS
FWD IF IN
LED Color
Description
• Green
• Downstream unit correctly connected; unit has no alarms or a
Minor alarm is active.
• Blinking Green • SRAU or band is set out‐of‐service.
FWD SECONDARY PORT
(1 ‐ 3)
• Yellow
• FWD cable connected to SRAU, no REV cable connected.
• Blinking
yellow
• FWD and REV cables are not connected to the same port
number (incorrectly paired).
• Red
• Major alarm in downstream unit, fault lockout, or SRAU
disconnected.
• Off
• No SRAU previously connected.
• Green
• MRAU receiving communications from the IFEU.
• Red
• MRAU has not received communications from the IFEU for more
than 90 seconds.
• Off
• During initial power up, MRAU is powering up and waiting for
IFEU communications.
• Green
• Unit has no alarms or a Minor alarm is active.
• Blinking green
• Unit or band is set out‐of‐service.
• Red
• Major alarm detected.
• Green
• Downstream unit correctly connected, unit has no alarms or
minor alarm
LINK
STATUS
• Blinking Green • SRAU or band is set out‐of‐service.
Page 6
©2014
REV SECONDARY PORT
(1 ‐ 3)
FWD IF IN
TE Connectivity Ltd.
• Blinking
Yellow
• FWD and REV cables are not connected to the same port
number (incorrectly paired).
• Red
• Major alarm in downstream unit, fault lockout, or SRAU
disconnected.
• Off
• No SRAU previously connected.
• Green
• MRAU is powered on correctly.
• Yellow or
Blinking
Yellow
• There is an IFEU FWD connection, but there is no IFEU REV
connection or the IFEU REV connection is paired incorrectly.
• Off
• Cable is not connected to the IFEU FWD port.
InterReach Spectrum Remote Access Unit Installation Guide ‐ Preliminary Not for Distribution
TECP‐77‐222 Issue 2 • 300001759666 Rev B • March 2014
Secondary Remote Access Units
A Secondary Remote Access Unit SRAU receives FWD )F signals from the MRAU, using  CATV cable. The
SRAU converts the )F signals to RF and sends them to a passive RF antenna using  coaxial cable. The SRAU,
through the MRAU, also receives configuration information and power from and sends its status information to
the )FEU.
The SRAU receives REV RF signals from a passive RF antenna using
)F and sends them to the MRAU using  CATV cable.
 coaxial cable. )t converts the signals to
SRAU Ports, Cable, and Connectors
SECONDARY
SECONDARY
REV
FWD
LINK
SECONDARY
REV
Ref
Component
SECONDARY REV connector
RF SMA cable (1)
STATUS
SECONDARY
FWD
LINK STATUS
Device
Function
F connector port
Connects to one of the MRAU REV SECONDARY ports (1 ‐ 3)
via CATV cable.
Connects two RF bands together when there is only one
N‐type connector on the RAU.
50 RF SMA‐to‐SMA cable For cases when there is an N‐type connector for each RF
band (700MIMO or PCS/AWS), there will not be an SMA
cable.
Antenna port(s)
50 N‐type connector
SECONDARY FWD connector F connector port
Connects to an antenna. See Table 2 on page 9.
Connects to one of the MRAU FWD SECONDARY ports (1 ‐
3) via CATV cable.
(1) The 700 MIMO SRAU does NOT have an RF SMA cable; it has two Antenna ports.
InterReach Spectrum Remote Access Unit Installation Guide ‐ Preliminary Not for Distribution
TECP‐77‐222 Issue 2 • 300001759666 Rev B • March 2014
©2014
Page 7
TE Connectivity Ltd.
SRAU LEDs
SECONDARY
SECONDARY
REV
FWD
LINK
SECONDARY
REV
LINK STATUS
Ref #
Page 8
©2014
LED
SECONDARY FWD
TE Connectivity Ltd.
SECONDARY
FWD
LED Color
Description
• Green
• SRAU receiving communications from the IFEU.
• Red
• SRAU has not received communications from the IFEU for more than 90
seconds.
• Off
• During initial power up, SRAU is powering up and waiting for IFEU
communications.
• Green
• Unit has no alarms or a Minor alarm is active.
LINK
STATUS
STATUS
• Blinking Green • Unit or band is set out‐of‐service.
• Red
• Major alarm detected.
• Green
• SRAU is powered on correctly.
• Yellow or
Blinking
Yellow
• There is an MRAU FWD connection, but there is no MRAU REV connection
or the MRAU REV connection is paired incorrectly.
• Off
• Cable is not connected to the MRAU FWD port.
InterReach Spectrum Remote Access Unit Installation Guide ‐ Preliminary Not for Distribution
TECP‐77‐222 Issue 2 • 300001759666 Rev B • March 2014
RAU N Connectors
Each RAU also has one or two ‐ N‐type connectors that connect to a passive antenna. Table lists the number
of N‐type connectors available on each RAU model.
Table 2.
Catalog Number
Number of N Connectors on RAUs
Description
Number of RF
Connectors*
Standard RAUs
SPT‐ M1‐ 8519‐1
Spectrum, 850‐1900 Main RAU
SPT‐ M1‐ AWS19‐11
Spectrum, 2100AWS Path 1‐1900 Path 1 Main RAU
SPT‐ S 1 ‐ 2121‐ 1‐ MIMO
Spectrum, 2100AWS MIMO Secondary RAU
SPT‐ S 1 ‐ 7070‐ 1‐ MIMO
Spectrum, 700 MIMO Secondary RAU, UpperC‐LowerABC
SPT‐ S 1 ‐ 8019‐22
Spectrum, 800 Path 2‐1900 Path 2 Secondary RAU
SPT‐ S 1 ‐ 8090‐ 1
Spectrum, 800‐900 Path 1 SMR Secondary RAU
SPT‐ S 1 ‐ 80A WS‐ 1
Spectrum, 800‐2100AWS Path 1 Secondary RAU
SPT‐ S 1 ‐ 8519‐ 22
Spectrum, 850 Path 2‐1900 Path 2 Secondary RAU
SPT‐ S 1 ‐ AW S19‐ 12
Spectrum, 2100AWS Path 1‐1900 Path 2 Secondary RAU
SPT‐ S 2 ‐ 70A WS‐ 1‐ S IS O
Spectrum, 700 SISO‐2100AWS Path 1 SEC RAU, UpperC‐LowerABC
SPT‐ S 2 ‐ 70A WS‐ 22‐ S IS O
Spectrum, 700 Path 2 SISO‐2100AWS Path 2 SEC RAU, UpperC‐LowerABC
High Power RAUs
SPT‐ M3‐ 8019‐31‐ H P
Spectrum, 800 Path 3 ‐ 1900 HP Path 1 Main RAU
SPT‐ M3‐ 8519‐11‐ H P
Spectrum, 850 Path 1‐1900 HP Path 1 Main RAU
SPT‐ S 3 ‐ 2626‐ 12‐ HP
Spectrum, 2600HP Path 1 ‐ 2600HP Path 2 Secondary RAU
SPT‐ S 3 ‐ 70A WS‐ 11‐ HP
Spectrum, 700 Path 1 uC/LABC‐AWS HP Path 1 Secondary RAU
SPT‐ S 3 ‐ 70A WS‐ 22‐ HP
Spectrum, 700 Path 2 uC/LABC‐AWS HP Path 2 Secondary RAU
SPT‐ S 3 ‐ 8019‐ 22‐ HP
Spectrum, 800 Path 2‐1900 HP Path 2 Secondary RAU
SPT‐ S 3 ‐ 8519‐ 22‐ HP
Spectrum, 850 Path 2 ‐ 1900 HP Path 2 Secondary RAU
There are two bands per RAU, which results in two N connectors. When there is one N connector, the two bands are
combined internally and both bands use the single N connector.
InterReach Spectrum Remote Access Unit Installation Guide ‐ Preliminary Not for Distribution
TECP‐77‐222 Issue 2 • 300001759666 Rev B • March 2014
©2014
Page 9
TE Connectivity Ltd.
INSTALL THE RAUS AND ANTENNAS
Follow the steps in the order provided to install the RAUs and antennas.
Mount the RAUs and Antennas
CAUTION!
Wet conditions increase the potential for receiving an electrical shock when installing or using electrically powered
equipment. To prevent electrical shock, never install or use electrical equipment in a wet location or during a lightning
storm.
CAUTION!
This system is a RF Transmitter and continuously emits RF energy. Maintain a minimum 8‐inch (20 cm) clearance from
the antenna while the system is operating. Whenever possible, shut down the RAN before servicing the antenna.
NOTE:
RAUs are suitable for use in environmental air space in accordance with Section 300‐22(c) of the National Electrical
Code, and Sections 2‐128, 12‐010(3) and 12‐100 of the Canadian Electrical Code, Part 1, CSA C22.1.
CAUTION!
Install RAUs in indoor locations only. Do not connect an antenna installed in an outdoor location to a RAU, unless it is
in an approved AOC weatherproof NEMA4 housing.
CAUTION!
Attach all RAUs securely to a stationary object (that is, a wall, pole, or ceiling brackets). To mount a RAU securely to a
wall, ceiling bracket, or pole, use #6 diameter fasteners in the four slotted mounting holes.
CAUTION!
Do the following to maintain proper ventilation:
•
•
•
Keep at least 76 mm (3‐inch) clearance around the RAU.
Do not stack RAUs on top of each other.
Always mount the RAU with the solid face (containing the mounting holes) against the mounting surface.
NOTE:
You can place the RAU, without its fastening hardware, on a flat surface, such as a shelf, desk, cabinet, or any other
horizontal surface that allows stable placement, with the mounting base facing down to the mounting surface.
CAUTION!
If installing the RAU on a flat surface, the surface must be able to hold a minimum 7‐pound load securely.
Do the following, in the order presented, to mount the RAUs and antennas:
NOTE:
Mount all MRAU and SRAUs in the locations marked on the floor plans.
)nstall the passive antennas according to the manufacturer’s installation instructions.
It is common practice to install passive antennas below the ceiling. If you install a passive antenna above the ceiling,
when estimating the antenna coverage area, account for additional loss due to the ceiling material.
Page 10
©2014 TE Connectivity Ltd.
InterReach Spectrum Remote Access Unit Installation Guide ‐ Preliminary Not for Distribution
TECP‐77‐222 Issue 2 • 300001759666 Rev B • March 2014
3
Connect a passive multi‐band antenna to the N connector on each RAU using coaxial cable with the least
amount of loss possible. See Omni Antenna Specifications on page
for information on the Omni Antenna
ports.
CAUTION!
Firmly hand‐tighten the N connector. DO NOT over‐tighten the connector.
MRAU
REV IF OUT
SRAU
N1
REV SECONDARY PORTS
LINK
STATUS
FWD SECONDARY PORTS
FWD IF IN
N1
SECONDARY
SECONDARY
FWD
REV
LINK
STATUS
False Ceiling
Coaxial cable
Coaxial cable
Omni Antenna
Connect the IFEU to the MRAU
NOTE:
The IFEU should be powered up before starting this procedure; see the InterReach Spectrum Expansion Module Group
Installation Guide (TECP‐77‐167).
Follow these rules for the CATV cables when connecting the )FEU to the MRAU:
•
•
•
•
The FWD and REV cables should be close to the same length.
The FWD and REV cables should be the same cable type both RG or both RG
A pair of CATV cables connects each MRAU to the )FEU. The )FEU REV Module )F )N port and the )FEU
FWD Module )F OUT port must match. For example, if )FEU REV Module )F )N Port is used, use )FEU
FWD Module )F OUT Port .
‐Ohm CATV Cable Requirements and Specifications on page
Refer to
RG‐ or RG‐ CATV cable lengths.
Test the cable termination for each CATV cable before installing it.
InterReach Spectrum Remote Access Unit Installation Guide ‐ Preliminary Not for Distribution
TECP‐77‐222 Issue 2 • 300001759666 Rev B • March 2014
for information on maximum
©2014
Page 11
TE Connectivity Ltd.
6
Connect F connector CATV cables on the )FEU and MRAU, in the order given below.
)f the LEDs do not perform as described in this procedure, refer to MRAU LEDs on page .
a Connect a CATV cable from one of the )FEU FWD Module )F OUT connectors ‐ to the MRAU FWD )F
)N connector.
b Confirm that the MRAU FWD )F )N LED is yellow, which indicates a correct physical connection.
c Connect a CATV cable from the )FEU REV Module )F )N connector ‐ to the MRAU REV )F OUT
connector, making sure that you pair the port used to the same port number selected in Step a.
)f the connection is correct, the MRAU powers up and the MRAU FWD )F )N LED turns green.
NOTE:
Torque applied to the F connector CATV cables should be 7 ±5% in‐lbs.
IFEU
Step 6a
Step 6c
MRAU
KEY:
To an antenna
REV IF OUT
REV SECONDARY PORTS
LINK
STATUS
FWD SECONDARY PORTS
IFEU FWD Module IF OUT connector to MRAU FWD IF IN connector
FWD IF IN
Step 6b
IFEU REV Module IF IN connector to MRAU REV IF OUT connector
Connect the MRAU to SRAUs
CAUTION!
To prevent interference, do not install an 850/1900 MRAU antenna near an 800/900 SRAU. The 850 MHz band must
be 20 feet away from the 800/1900 SRAU’s passive antenna.
Use one of the following ’ and
connect an MRAU to SRAUs.
’ CATV RG jumpers, available for purchase from TE Connectivity, to
TE Part Number
Description
Note
300469‐0
6’ RG‐6 Cable; F Male to F Male
CATV cable that connects the MRAU to SRAUs. Two cables required per SRAU.
300469‐1
20’ RG‐6 Cable; F Male to F Male CATV cable that connects the MRAU to SRAUs. Two cables required per SRAU.
Test the cable termination for each CATV cable before installing it.
Page 12
©2014 TE Connectivity Ltd.
InterReach Spectrum Remote Access Unit Installation Guide ‐ Preliminary Not for Distribution
TECP‐77‐222 Issue 2 • 300001759666 Rev B • March 2014
9
NOTE:
Connect F connector CATV cables from the MRAU to an SRAU, in the order given below. )f the LEDs do not
perform as described in this procedure, refer to SRAU LEDs on page .
a Connect a CATV cable from an MRAU FWD SECONDARY PORT , , or F connector to the SRAU
SECONDARY FWD F connector.
b Confirm that the SRAU SECONDARY FWD LED is yellow, which indicates a correct physical connection.
c Connect a CATV cable from an MRAU REV SECONDARY PORT , , or F connector to the SRAU
SECONDARY REV F connector, matching the same port number selected in Step a. That is, if in Step a
you connected an F connector to the MRAU FWD SECONDARY PORT 1, the paired CATV cable must
connect to the MRAU REV SECONDARY PORT 1.
)f the connection is correct, the SRAU powers up and the SRAU SECONDARY FWD LED turns green.
Torque applied to the F connector CATV cables should be 7 ±5% in‐lbs.
To an antenna
MRAU
To an IFEU
REV Module
IF IN connector
(1 - 8)
REV IF OUT
REV SECONDARY PORTS
Step 9c
LINK
STATUS
FWD SECONDARY PORTS
FWD IF IN
To an IFEU
FWD Module
IF OUT connector
(1 - 8)
Step 9a
To an antenna
SRAU
SECONDARY
SECONDARY
REV
FWD
LINK
SECONDARY
REV
KEY:
STATUS
LINK STATUS
MRAU FWD Secondary port to SRAU Secondary FWD port
SECONDARY
FWD
Step 9b
MRAU REV Secondary port to SRAU Secondary REV port
InterReach Spectrum Remote Access Unit Installation Guide ‐ Preliminary Not for Distribution
TECP‐77‐222 Issue 2 • 300001759666 Rev B • March 2014
©2014
Page 13
TE Connectivity Ltd.
10
Repeat Step to install up to two more SRAUs, as per system design.
MRAU
To an antenna
REV IF OUT
FWD SECONDARY PORTS
REV SECONDARY PORTS
LINK
FWD IF IN
STATUS
To an IFEU REV Module
IF IN connector (1 - 8)
To an IFEU FWD Module
IF OUT connector (1 - 8)
To an antenna
SECONDARY
SECONDARY
SECONDARY
FWD
REV
REV
LINK
SRAU1
KEY:
SECONDARY
FWD
STATUS
LINK
To an antenna
To an antenna
SECONDARY
FWD
STATUS
SRAU3
SECONDARY
REV
FWD
LINK
STATUS
REV
SRAU2
Configure the MRAUs and SRAUs
Refer to the InterReach Spectrum™ Element Management System 7.3 User Manual TECP‐
on how to configure the MRAUs and SRAUs.
‐
for information
SPECIFICATIONS
Remote Access Unit Specifications
Operating Temp
‐25°C to +50°C
Storage Temperature
‐40°C to +70°C
Humidity
10% to 95% non‐condensing
Dimensions
11.50" W x 3.50" H x 9.00" D
Weight
7.49 Pounds
Power Source
+54Vdc (from IFEU)
Spectrum System Specifications
RF Specification
Supported Frequency Blocks
2 per Remote Antenna Unit; 1‐8 per Host Unit
Bandwidth
1.5 to 75 MHz non‐contiguous
Page 14
©2014 TE Connectivity Ltd.
InterReach Spectrum Remote Access Unit Installation Guide ‐ Preliminary Not for Distribution
TECP‐77‐222 Issue 2 • 300001759666 Rev B • March 2014
Propagation Delay
System Delay
<12 microseconds per DRU link
(For example, in a cascade of 3 DRUs, the overall System Delay could be
up to 36 microseconds. This does not include Fiber Delay, just System
Delay along each segment of the cascade.)
Delay Management Digital
(Manual or Automatic)
Nominal Passband Bandwidths and Gains
Frequency Bands Supported
850 Cellular; 800 iDEN; 900 iDEN; 1900 PCS; 2100 AWS; 2600 LTE; 700
Upper C/ Lower ABC
Table 3.
RF Frequency
TX
RX
869‐894
824‐849
40
30
851‐869
806‐824
40
30
935‐940
896‐901
40
30
1930‐1995
1850‐191
40
30
2110‐2155
1710‐175
40
30
2620‐2690
2500‐257
40
30
746‐756
776‐786
40
30
728‐746
698‐716
40
30
850 Cell
Bandwidth
Gain (dB)
800 SMR
Bandwidth
Gain (dB)
900 SMR
Bandwidth
Gain (dB)
1900 PCS
Bandwidth
Gain (dB)
2100 AWS
Bandwidth
Gain (dB)
2600 LTE
Bandwidth
Gain (dB)
700 Upper C
Bandwidth
Gain (dB)
700 Lower ABC
Bandwidth
Gain (dB)
InterReach Spectrum Remote Access Unit Installation Guide ‐ Preliminary Not for Distribution
TECP‐77‐222 Issue 2 • 300001759666 Rev B • March 2014
©2014
Page 15
TE Connectivity Ltd.
Low/Medium
Power Level
700‐900 MHz
Typical
Low/Medium
Power Level
1900‐2600 MHz
Typical
High
Power Level
1900‐2600 MHz
Typical3
TX
RX
TX
RX
TX
RX
401/432
30
401/432
30
48
30
Ripple with 180 m CATV (dB)
2.5
3.0
3.5
4.0
3.5
4.0
Output IP3 (dBm)
38
Average gain with 180 m CATV
at 25°C (77° F) (dB)
‐8
Input IP3 (dBm)
Output 1 dB Compression Point (dBm)
38
26
43
‐8
26
‐8
31
Noise Figure 1 HU‐1 EMG‐8 RAUs (dB)
17
17
17
Noise Figure 1 HU‐4 EMG‐32 RAUs (dB)
23
23
23
1 Low Power is defined here as a Standard MRAU used with
Standard SRAUs; see Table 4 on page 17.
2 Medium Power is defined here as a High Power MRAU used
with Standard SRAUs; see Table 5 on page 18.
3 High Power is used to define a High Power MRAU used with
High Power SRAUs; see Table 6 on page 19.
Page 16
©2014 TE Connectivity Ltd.
InterReach Spectrum Remote Access Unit Installation Guide ‐ Preliminary Not for Distribution
TECP‐77‐222 Issue 2 • 300001759666 Rev B • March 2014
Composite Power Out of RAU
Table 4.
Low Power Level: Standard MRAU with SRAUs
Power per Carrier (dBm) per Band
RF Frequency
TX
RX
Number of RF Carriers
4 P‐Out
8 P‐out
20.0
14.0
9.0
23.0
17.5
12.0
8.0
EDGE
15.0
12.0
9.0
6.0
CDMA
15.0
12.0
9.0
6.0
WCDMA
Standard SRAUs
15.0
12.0
9.0
6.0
LTE
•
•
•
•
•
•
•
•
•
SPT‐S1‐8090‐1
17.5
14.0
10.0
6.5
iDEN
SPT‐S1‐7070‐1‐MIMO
26.0
19.5
13.5
8.5
APCO 25 C4FM
15.0
12.0
9.0
6.0
CDMA
15.0
12.0
9.0
6.0
LTE
17.5
14.0
10.0
6.5
iDEN
26.0
20.0
13.5
9.0
APCO 25 C4FM
SPT‐S1‐2121‐1‐MIMO
26.0
20.0
14.0
9.0
GSM
SPT‐S1‐8019‐22
23.0
17.5
12.0
8.0
EDGE
Standard MRAUs:
• SPT‐M1‐8519‐1
• SPT‐M1‐AWS19‐11
SPT‐S1‐80AWS‐1
26.0
850 Cell
800 SMR
869‐894
851‐869
824‐849
806‐824
SPT‐S2‐70AWS‐1‐SISO
SPT‐S2‐70AWS‐22‐SISO
SPT‐S1‐AWS19‐12
SPT‐S1‐8519‐22
1 P‐out 2 P‐out
900 SMR
1900 PCS
935‐940
1930‐1995
896‐901
1850‐1915
2100 AWS
2110‐2155
1710‐1755
700 Upper C
746‐756
776‐786
700 Lower ABC 728‐746
698‐716
InterReach Spectrum Remote Access Unit Installation Guide ‐ Preliminary Not for Distribution
TECP‐77‐222 Issue 2 • 300001759666 Rev B • March 2014
GSM
15.0
12.0
9.0
6.0
CDMA
15.0
12.0
9.0
6.0
WCDMA
15.0
12.0
9.0
6.0
LTE
15.0
12.0
9.0
6.0
WCDMA
15.0
12.0
9.0
6.0
LTE
15.0
12.0
9.0
6.0
LTE
©2014
Page 17
TE Connectivity Ltd.
Table 5.
Medium Power Level: High Power MRAUs1 used with Standard SRAUs
Power per Carrier (dBm) per Band
RF Frequency
TX
850 Cell
Number of RF Carriers
RX
869‐894
1 P‐out
824‐849
2 P‐out 4 P‐Out 8 P‐out
26.0
20.0
14.0
9.0
GSM
23.0
17.5
12.0
8.0
EDGE
18.0
15.0
12.0
9.0
CDMA
18.0
15.0
12.0
9.0
WCDMA
Standard SRAUs
18.0
15.0
12.0
9.0
LTE
•
•
•
•
•
•
•
•
•
17.5
14.0
10.0
6.5
iDEN
26.0
19.5
13.5
8.5
APCO 25 C4FM
18.0
15.0
12.0
9.0
CDMA
SPT‐S2‐70AWS‐1‐SISO
18.0
15.0
12.0
9.0
LTE
SPT‐S2‐70AWS‐22‐SISO
17.5
14.0
10.0
6.5
iDEN
26.0
19.5
13.5
8.5
APCO 25 C4FM
26.0
20.0
14.0
9.0
GSM
SPT‐S1‐8090‐1
SPT‐S1‐7070‐1‐MIMO
SPT‐S1‐80AWS‐1
SPT‐S1‐AWS19‐12
800 SMR
900 SMR
851‐869
806‐824
935‐940
896‐901
SPT‐S1‐2121‐1‐MIMO
SPT‐S1‐8019‐22
SPT‐S1‐8519‐22
1900 PCS
1930‐1995
1850‐1915
2100 AWS
2110‐2155
1710‐1755
700 Upper C
746‐756
776‐786
700 Lower ABC 728‐746
698‐716
See power per carrier of (P MRAU from Table on page
Page 18
©2014 TE Connectivity Ltd.
23.0
17.5
12.0
8.0
EDGE
18.0
15.0
12.0
9.0
CDMA
18.0
15.0
12.0
9.0
WCDMA
18.0
15.0
12.0
9.0
LTE
18.0
15.0
12.0
9.0
WCDMA
18.0
15.0
12.0
9.0
LTE
18.0
15.0
12.0
9.0
LTE
InterReach Spectrum Remote Access Unit Installation Guide ‐ Preliminary Not for Distribution
TECP‐77‐222 Issue 2 • 300001759666 Rev B • March 2014
Table 6.
High Power Level: High Power MRAU with High Power SRAUs
Power per Carrier (dBm) per Band
RF Frequency
TX
RX
High Power MRAU
• SPT‐M3‐8519‐11‐HP
• SPT‐M3‐8019‐31‐HP
850 Cell
869‐894
824‐849
High Power SRAUs
•
•
•
•
•
SPT‐S3‐70AWS‐11‐HP
SPT‐S3‐70AWS‐22‐HP
800 SMR
806‐824
1 P‐out 2 P‐out 4 P‐Out 8 P‐out
26.0
20.0
14.0
9.0
GSM
23.0
17.5
12.0
8.0
EDGE
18.0
15.0
12.0
9.0
CDMA
18.0
15.0
12.0
9.0
WCDMA
18.0
15.0
12.0
9.0
LTE
17.5
14.0
10.0
6.5
iDEN
26.0
19.5
13.5
8.5
APCO 25 C4FM
18.0
15.0
12.0
9.0
CDMA
SPT‐S3‐8519‐22‐HP
18.0
15.0
12.0
9.0
LTE
SPT‐S3‐2626‐12‐HP
17.5
14.0
10.0
6.5
iDEN
26.0
19.5
13.5
8.5
APCO 25 C4FM
26.0
23.0
19.0
14.0
GSM
26.0
22.5
17.0
13.0
EDGE
23.0
20.0
17.0
14.0
CDMA
23.0
20.0
17.0
14.0
WCDMA
23.0
20.0
17.0
14.0
LTE
23.0
20.0
17.0
14.0
WCDMA
23.0
20.0
17.0
14.0
LTE
23.0
20.0
17.0
14.0
WCDMA
23.0
20.0
17.0
14.0
LTE
SPT‐S3‐8019‐22‐HP
900 SMR
1900 PCS
NOTE:
851‐869
Number of RF Carriers
935‐940
1930‐1995
896‐901
1850‐1915
2100 AWS
2110‐2155
1710‐1755
2600 LTE
2620‐2690
2500‐2570
700 Upper C
746‐756
776‐786
700 Lower ABC 728‐746
698‐716
18.0
15.0
12.0
9.0
LTE
Models SPT‐M3‐8019‐31‐HP and SPT‐S3‐8019‐22‐HP ‐ Industry Canada Mean Output Power is 24.33 dBm (800 SMR)
and 26.83 dBm (1900 PCS).
InterReach Spectrum Remote Access Unit Installation Guide ‐ Preliminary Not for Distribution
TECP‐77‐222 Issue 2 • 300001759666 Rev B • March 2014
©2014
Page 19
TE Connectivity Ltd.
75‐OHM CATV CABLE REQUIREMENTS AND SPECIFICATIONS
The
•
•
•
•
•
‐Ohm CATV Cable:
connects the )FEU to MRAU s and the MRAU s to the SRAU s
transmits FWD multiband and receives REV )F signals
delivers DC electrical power to the RAUs. The Spectrum )FEU DC voltage output is +
)FEU reaches its current limit, a current‐limiting circuit protects it.
carries configuration and status information
uses
Vdc nominal. )f the
 type‐F connectors with captive center pins.
CATV Cable Requirements
Belden CATV cable or equivalent is required (see Figure ).
•
•
NOTE:
For the RG‐ cable, use a Belden
For the RG‐
cable, use a Belden
A Coax.
A Coax.
TE Connectivity requires solid copper center conductor CATV cable for proper DC voltage to the RAU and maximum
distances.
RG-6
RG-11
Belden 1695A Coax
Belden 7732A Coax
Figure 2. Belden 1695A and 7732A Coax Cables
•
Use RG‐ or RG‐
CATV cable between the )FEU and MRAU, the typical lengths of which are listed below.
Minimum
Length
Cable Type
Page 20
©2014 TE Connectivity Ltd.
Maximum
Length
Meters
Feet
Meters
Feet
RG‐6
125
410
RG‐11
180
590
InterReach Spectrum Remote Access Unit Installation Guide ‐ Preliminary Not for Distribution
TECP‐77‐222 Issue 2 • 300001759666 Rev B • March 2014
•
Use only RG‐ CATV cable between the MRAU and SRAU, the lengths of which are listed below.
RG‐6 Cable
Meters Feet
Typical
6.56
800/900 iDEN to 850 CELL
19.68
800 AWS to 850 CELL
19.68
Belden 1695A Coax Specifications
Description
RG‐ /U type, AWG solid .
‐inch bare copper conductor, plenum, foam Fluorinated Ethylene Propylene (FEP
insulation, Duofoil® + tinned copper braid shield
% coverage , Flamarrest® jacket.
Overall Physical Characteristics
Conductor
One Coax
18 AWG
Solid stranding
Bare Copper (BC) conductor material
0.040‐inch diameter
Insulation
Teflon®
Foam Fluorinated Ethylene Propylene (FFEP)
0.170‐inch diameter
Outer Shield Layer 1
Duofoil®
Tape
Aluminum Foil‐Polyester Tape‐Aluminum Foil
100% coverage
Outer Shield Layer 2
Braid
Tinned Copper (TC)
95% coverage
Outer Jacket
Flamarrest®
Low Smoke Polyvinyl Chloride (LS PVC)
Overall Cabling
0.234‐inch overall nominal diameter
InterReach Spectrum Remote Access Unit Installation Guide ‐ Preliminary Not for Distribution
TECP‐77‐222 Issue 2 • 300001759666 Rev B • March 2014
©2014
Page 21
TE Connectivity Ltd.
Overall Nominal Electrical Characteristics
Characteristic Impedance
75.000
Inductance
0.103 H/ft.
Capacitance Conductor to Shield
16.100 (pF/ft.)
Velocity of Propagation
82 (%)
Delay
1.240 (ns/ft.)
Conductor DC Resistance
6.400 @ 20°C (/1000 ft.)
Outer Shield DC Resistance
2.800 @ 20°C (/1000 ft.)
Attenuation
Freq. (MHz) Attenuation (dB/100 ft.)
Page 22
©2014 TE Connectivity Ltd.
1.000
0.240
3.580
0.450
5.000
0.550
7.000
0.650
10.000
0.750
67.500
1.740
71.500
1.780
88.500
1.940
100.000
2.100
135.000
2.400
143.000
2.500
180.000
2.800
270.000
3.400
360.000
4.000
540.000
5.200
720.000
6.100
750.000
6.200
1000.000
7.300
1500.000
9.200
2000.000
10.900
2250.000
11.600
3000.000
13.700
InterReach Spectrum Remote Access Unit Installation Guide ‐ Preliminary Not for Distribution
TECP‐77‐222 Issue 2 • 300001759666 Rev B • March 2014
Belden 7732A Coax Specifications
Description
RG‐ /U type,
AWG solid .
‐inch bare copper conductor, plenum, foam FEP insulation, Duofoil® + tinned
copper braid shield
% coverage , fluorocopolymer jacket.
Overall Physical Characteristics
Conductor
One Coax
18 AWG
Solid stranding
Bare Copper (BC) conductor material
0.064‐inch diameter
Insulation
Teflon®
Foam Fluorinated Ethylene Propylene (FFEP)
0.274‐inch diameter
Outer Shield Layer 1
Duofoil®
Tape
Aluminum Foil‐Polyester Tape‐Aluminum Foil
100% coverage
Outer Shield Layer 2
Braid
Tinned Copper (TC)
95% coverage
Outer Jacket
Fluorocopolymer (PVDF)
Overall Cabling
0.348‐inch overall nominal diameter
InterReach Spectrum Remote Access Unit Installation Guide ‐ Preliminary Not for Distribution
TECP‐77‐222 Issue 2 • 300001759666 Rev B • March 2014
©2014
Page 23
TE Connectivity Ltd.
Overall Nominal Electrical Characteristics
Characteristic Impedance
75.000
Inductance
0.091 H/ft.
Capacitance Conductor to Shield
16.300 (pF/ft.)
Velocity of Propagation
83 (%)
Delay
1.220 (ns/ft.)
Conductor DC Resistance
2.500 @ 20°C (/1000 ft.)
Outer Shield DC Resistance
1.600 @ 20°C (/1000 ft.)
Attenuation
Freq. (MHz) Attenuation (dB/100 ft.)
Page 24
©2014 TE Connectivity Ltd.
1.000
0.150
3.580
0.260
5.000
0.300
7.000
0.340
10.000
0.400
67.500
1.200
71.500
1.240
88.500
1.400
100.000
1.500
135.000
1.780
143.000
1.840
180.000
2.090
270.000
2.600
360.000
3.100
540.000
3.890
720.000
4.570
750.000
4.680
1000.000
5.500
1500.000
6.910
2000.000
8.130
2250.000
9.200
3000.000
10.200
InterReach Spectrum Remote Access Unit Installation Guide ‐ Preliminary Not for Distribution
TECP‐77‐222 Issue 2 • 300001759666 Rev B • March 2014
OMNI ANTENNA SPECIFICATIONS
The Omni Antenna
‐
, shown in Figure , is a round radome with the following specifications:
Ceiling mount, vertically polarized, omni directional antenna
Figure 3. Omni Antenna
Gain, typical
Port 1
2 dBi @ 698‐960 MHz
Port 2
2 dBi @ 698‐960 MHz
Port 3
3 dBi @1710‐2170 MHz
3 dBi @ 1710‐2170 MHz
3 dBi @ 1710‐2170 MHz
3 dBi @ 2496‐2690 MHz
Nominal impedance
50 Ohm
Polarization
Vertical
VSWR
< 2:1
Port‐to‐port isolation
>15 dB min, 22 dB typical
Power rating
5 Watt
Mechanical
Dimension of Antenna (DxH)
215 x 72 mm
Weight
Less than or equal to 1.65 lbs (0.75kg), including pigtails
Connector
N (male)
Cable (pigtail) length
6 feet, plenum rated cable
Color
White, UV protected plastic for outdoor use
Mounting hardware
Screws, anchor, and butterfly nut for ceiling tile mount
Environmental
Operating temperature
‐ 40°C to + 65°C
Shipping and Handling
ISTA Procedure 1A
Ingress protection
IP‐42
Flammability
UL94V0 (Materials)
Compliance
ROHS compliant
NOTE:
Two antennas per RAU is required for MIMO performance.
CAUTION!
Maximum gain antenna allowed is 3dBi
InterReach Spectrum Remote Access Unit Installation Guide ‐ Preliminary Not for Distribution
TECP‐77‐222 Issue 2 • 300001759666 Rev B • March 2014
©2014
Page 25
TE Connectivity Ltd.
STANDARDS CERTIFICATION
Federal Communications Commission (FCC)
This equipment complies with the applicable sections of Title CFR, Part
Part
‐ SMR , and Part
M(z,
M(z ‐ AWS .
Part 90 Signal Boosters
M(z Cellular , Part
M(z ‐ PCS ,
The following statement is applicable to the following RAUs that are documented in this installation guide:
SPT‐M ‐
‐ ‐(P, SPT‐S ‐
‐ , SPT‐S ‐
‐ , SPT‐S ‐ AWS‐ , SPT‐S ‐
‐ ‐(P.
WARNING. This is NOT a CONSUMER device. )t is designated for installation by FCC L)CENSEES and QUAL)F)ED
)NSTALLERS. You MUST have an FCC L)CENSE or express Consent of an FCC Licensee to operate this device. Unauthorized
use may result in Significant forfeiture penalties, including penalties in excess of $
for each continuing violation.
Industry Canada (IC)
This equipment complies with the applicable sections of RSS‐
‐ Zone Enhancers for the Land Mobile Service. The term
)C: before the radio certification number only signifies that )ndustry Canada Technical Specifications were met.
The Manufacturer's rated output power of this equipment is for single carrier operation. For situations when multiple
carrier signals are present, the rating would have to be reduced by . dB, especially where the output signal is re‐radiated
and can cause interference to adjacent band users. This power reduction is to be by means of input power or gain reduction
and not by an attenuator at the output of the device.
NOTE:
The U. S. Federal Communications Commission (FCC) has developed guidelines for evaluation of human exposure to
RF emissions. The guidelines incorporate limits for Maximum Permissible Exposure (MPE) for power density of
transmitter operating at frequencies between 300 kHz and 100 GHz. Limits have been set for portable, mobile, and
fixed equipment. TE Connectivity products fall in the category of fixed equipment; products intended to be
permanently secured and exposures are evaluated for distances greater than 40cm (15.75”). Portable devices fall into
exposures of less than 20cm, where SAR evaluations are used.
Antenna gain is restricted to 1.5 W ERP (2.49 W EIRP) in order to satisfy RF exposure compliance requirements.
If higher than 1.5 W ERP, routine MPE evaluation is needed. The antennas should be installed to provide at
least 40cm from all persons to satisfy MPE requirements of FCC Part 2, 2.1091.
This device complies with )ndustry Canada licence‐exempt RSS standard s . Operation is subject to the following two
conditions:
this device may not cause interference, and
this device must accept any interference, including
interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’)ndustrie Canada applicables aux appareils radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes:
l’appareil ne doit pas produire de brouillage, et
l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
The device meets the exemption from the routine evaluation limits in section . of RSS
RF exposure, users can obtain Canadian information on RF exposure and compliance.
and compliance with RSS‐
Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section . de RSS
et la conformité à
l'exposition de RSS‐
rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformité de rf.
UL/CUL
This equipment will be installed in a restricted access location. This equipment complies, per UL and CUL
Enclosures for Electrical Equipment.
This equipment complies with UL and CUL
Electrical Business Equipment.
, Standard for
‐ Standard for Safety for )nformation Technology Equipment, including
All )nterReach Spectrum RAUs are Plenum rated and suitable for use in environmental air space in accordance with Section
‐ C of the National Electrical Code, and Sections ‐
, ‐
and ‐
of the Canadian Electrical Code, Part
, CSA C . .
Page 26
©2014 TE Connectivity Ltd.
InterReach Spectrum Remote Access Unit Installation Guide ‐ Preliminary Not for Distribution
TECP‐77‐222 Issue 2 • 300001759666 Rev B • March 2014
This equipment is UL Plenum rated under UL
CAUTION!
Modifications not expressly approved by the party responsible for compliance could void the user's authority to
operate the equipment.
ACCESSING USER DOCUMENTATION ON THE TE CUSTOMER PORTAL
You can access additional user documentation on the TE Customer Portal, as described below.
Click on the following URL link:
https://www.te.com/portal/wireless/
Alternatively, enter the preceding URL into your web browser, and then press ENTER on your keyboard.
Access to the Customer Portal requires a user account and password. On the Sign In page, do one of the
following:
•
•
)f you have an account, in the Already Registered? Sign In Now panel, enter your Email and Password, and
then click Sign In.
)f you don’t have an account, under Create an Account, click Register Now and follow the prompts.
On the Wireless Customer Portal home page in the Knowledge Center panel, click the Manuals and Data Sheets
link.
On the Manuals and Data Sheets page, do the following:
a )n the Document Repository panel, scroll to the section for the product line of the document that you want
to access.
b Click on the title of the manual that you wish to open.
Optional Save the PDF to your computer.
InterReach Spectrum Remote Access Unit Installation Guide ‐ Preliminary Not for Distribution
TECP‐77‐222 Issue 2 • 300001759666 Rev B • March 2014
©2014
Page 27
TE Connectivity Ltd.
CONTACTING TE CONNECTIVITY
Telephone Numbers
Sales
Asia Pacific
+65‐6294‐9948
France
0800 914032
Germany
0180 2232923
Italy
0800 782374
Spain
900 983291
United Kingdom
0800 960236
USA or Canada
1‐800‐366‐3891
Extension
Connectivity Extension
Wireless Extension
73000
73475
73476
Technical Support
USA or Canada
1‐800‐530‐9960
Elsewhere
+1‐952‐917‐0761
Online Access
Customer Portal
https://www.te.com/portal/wireless/
Technical Support for Wireless Products
http://www.te.com/WirelessSupport
www.te.com/wireless
Page 28
©2014 TE Connectivity Ltd.
InterReach Spectrum Remote Access Unit Installation Guide ‐ Preliminary Not for Distribution
TECP‐77‐222 Issue 2 • 300001759666 Rev B • March 2014

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : te106558
Create Date                     : 2014:03:17 17:44:28-07:00
Modify Date                     : 2014:03:28 14:49:21-07:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2014:03:28 14:49:21-07:00
Format                          : application/pdf
Title                           : 77222p2_Test.fm
Creator                         : te106558
Producer                        : Acrobat Distiller 11.0 (Windows)
Document ID                     : uuid:5897a13d-30a6-4326-a3e1-e43b596bd19a
Instance ID                     : uuid:4afafa9b-2f2e-4d4a-b6e8-eb535ac2ad6e
Page Count                      : 28

EXIF Metadata provided by EXIF.tools