ADTRAN 434RG Indoor GPON HGU User Manual

Adtran Indoor GPON HGU

Contents

Users Manual

Download: ADTRAN 434RG Indoor GPON HGU User Manual
Mirror Download [FCC.gov]ADTRAN 434RG Indoor GPON HGU User Manual
Document ID2980768
Application IDRj/xCDOrCdxSYWLMsatnyg==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize139.46kB (1743277 bits)
Date Submitted2016-05-05 00:00:00
Date Available2016-11-01 00:00:00
Creation Date2004-02-06 16:40:53
Producing SoftwareAcrobat Distiller 10.1.16 (Windows)
Document Lastmod2016-03-07 17:23:12
Document Titleuntitled
Document CreatorFrameMaker 10.0.2

ADTRAN 434RG
2 POTS/4 GigE/RF/MoCA
with Dual Band WiFi
CLEI: BVMDV00D_ _
Product P/N: 1287782F1
Documentation for ADTRAN® Carrier Networks products is available
for viewing and download directly from the ADTRAN Support
Community website.
Go to: https://supportforums.adtran.com/welcome
Registration is required.
ADTRAN offers training courses on our products, including customized
training and courses taught at our facilities or at customer sites.
jobAid
Issue Date: December 2015
Document P/N: 61287782F1-22A
The following related online documents and resources provide additional information for this product:
Total Access 5000 GPON OLT User Interface Guide
Total Access 5000 Series CLI Dictionary
Total Access 5000/5006 Engineering Guide
Total Access 5000 Series Fiber to the Premises Deployment Guide
ADTRAN 434RG ONT 2 POTS/4 GigE/RF/MoCA with Dual Band WiFi User Interface Guide
For inquiries, go to: http://adtran.com/training
DESCRIPTION
The ADTRAN 434RG 2POTS/4GigE Indoor ONT with RF (434RG ONT, P/N 1287782F1)
provides Triple Play and WiFi services to a customer premises. The 434RG ONT also supports RF
and Multimedia over Coax Alliance (MoCA 2) with backward compatibility to 1.1. The illustration
at the left displays the front and rear of the 434RG ONT.
RESET
USB
GE 1
GE 2
GE 3
GE 4
2.4
PHONE 1
5.0
PHONE 2
FEATURES
The 434RG ONT supports the following features:
■ Two POTS (PHONE) Ports
■ Four Ethernet Ports
■ 2.4 GHz and 5 GHz WiFi
■ CATV (with Coaxial Connection)
■ MoCA 2.0 (backward compatible with 1.1)
■ USB 2.0 Port
■ 12 VDC Power Adapter
■ UPS Connector
■ Reset Button
Resetting the ONT
A reset button is available if the 434RG ONT needs to be rebooted. The Reset button is located just
above the USB port on the rear of the 434RG ONT. To reset the 434RG ONT, press the RESET
button for 5 seconds or longer.
WARNING
All settings will return to Factory Defaults; registration provisioning will be lost.
RF
WPS
UPS
12V
Voice Processing
POTS uses in-band signaling tones and currents to determine call status (for example, call
request). Because POTS allows for the transfer of audio signals below 3.3 kHz, POTS systems are
also used for modems that allow data transmission (referred to as dial up connections).
Ethernet Interface
The 434RG ONT supports data service through four 10/100/1000Base-T Ethernet interfaces via
RJ-45-style connectors.
Power
Power is provided by a 12 VDC Power Adapter that is included with the 434RG ONT. The Power Adapter operates from a main power source input of
100 to 240 VAC, 50/60 Hz, with a nominal output of 12 VDC. The total power consumption with WiFi enabled, 4 Ethernet Ports running and both POTS
lines off-hook is approximately 15.0 Watts. A connection for an optional un-interruptible power supply (UPS) is also provided.
UPS
The 434RG ONT provides an optional connection for an UPS. An UPS is a battery backup system designed to continue providing power when the
primary power source is lost. Power is supplied to the 434RG ONT by a local power source with battery backup that utilizes the AC power at the
customer premises and keeps the battery charged.
WiFi
The 434RG ONT provides 802.11 a/b/g/n/ac compliant WiFi that support both 2.4 GHz and 5.0 GHz.
CATV
Cable Television (CATV) is television service that provides cable Internet
service with television to customers over the same links - normally coaxial
cable. CATV operates at a frequency of 54-870 MHz.
MoCA 2.0
Multimedia over Coax Alliance (MoCA) is an industry standard
technology for connecting the home to a service provider. MoCA
technology uses existing coaxial cabling for distributing high definition
video with multi-room applications such as DVRs.
The 434RG ONT supports MoCA Version 2.0 and is backward compatible
to MoCA Version 1.1. MoCA 2.0 operates in C4 and D bands with a
frequency range from 1125 to 1500 MHz. Channel bandwidth throughput
increased from > 140 Mb/s (MoCA 1.1) to 400 Mb/s. MoCA 2.0.
INSTALLATION
3. Thread the fiber cable through the opening in the base. If there is
excess fiber, carefully wrap it around the Fiber Tray.
4. Remove the dust cover plug from the SC/APC Connector and
insert the fiber cable. Retain the dust cover and insert it in the fiber
connection when the fiber cable is not connected. This will protect
the optical portion of the connection.
5. Figure 2 illustrates the 434RG ONT after the base has been attached.
Fiber
Opening
Fiber
Tray
Screw
SC/APC
Connector
After unpacking the 434RG ONT, inspect it for damage. If damage is
noted, file a claim with the carrier and then contact ADTRAN. For more
information, refer to the warranty.
Installation consists of positioning the 434RG ONT on a desktop and
connecting POTS (PHONE), Ethernet, Fiber, and Power.
Installation Guidelines
The following are guidelines for this installation.
■ Read all warnings and cautions before installing or servicing the
434RG ONT.
■ Do not locate the 434RG ONT in direct sunlight or next to any
Figure 1. Attach 434RG ONT to Base and Connect Fiber
thermal devices.
Installation Overview
To install the 434RG ONT, you will need to complete the following
steps:
■ “Step 1: Attach the 434RG ONT to the Base and connect Fiber”
■
■
■
■
■
■
“Step 2: Connect POTS (PHONE)”
“Step 3: Connect Ethernet”
“Step 4: Connect Power”
“Step 5: Connect USB”
“Step 6: Connect Coaxial Cable”
“Step 7: Connect UPS (optional)”
2.4
5.0
Required tools
Standard technician tools and those listed below are required for
installing the 434RG ONT.
■ PON power meter with wavelength filtering
■ Fiberscope or videoscope
For fiber optic connections, the following is required:
■ ODC Fiber cleaning tool
Installation Steps
NOTICE
The 434RG ONT must sit upright using the stand provided. DO NOT
lay the ONT flat as it may overheat.
Step 1: Attach the 434RG ONT to the Base and connect
Fiber
Ensure the 434RG ONT is not located in direct sunlight and is not located
next to any thermal obstructions. To attach the 434RG ONT to the base,
refer to Figure 1 and complete the following steps:
RF
WPS
Figure 2. 434RG ONT with Base Attached
Step 2: Connect POTS (PHONE)
If POTS cables are not available, use Figure 3 and the following procedure
to create the POTS cables:
1. Trim the insulation for the subscriber POTS cables.
2. Refer to Figure 3 and connect the twisted-pair Tip (green) and Ring
(Red) to the RJ-11 connector using an RJ-11 crimper.
3. Insert the RJ-11 connector in the appropriate PHONE 1 or PHONE 2
jack.
1. Position the 434RG ONT on the base.
2. Using the screw provided, secure the base to the 434RG ONT.
61287782F1-22A
UPS Connector
1234
Connect the UPS to the 8-pin MOLEX connector labeled “UPS” located on
the rear of the SFU ONT chassis. Figure 4 illustrates the MOLEX connector
on the rear of the ONT.
1 = Not Connected
2 = Tip
3 = Ring
4 = Not connected
44
Figure 3. POTS (PHONE) Connection
Step 3: Connect Ethernet
The 434RG ONT supports four, CAT 6, 1 Gigabit (10/100/1000Base-T)
connections (GE 1 to GE 4).
If Ethernet cables are not available, use the following procedure and table
to create the Ethernet cables:
1. Trim the insulation for the subscriber Ethernet cable.
2. Connect the wires per the following table using an RJ-45 Crimper.
Ethernet RJ-45 Pin-out
Pin
Name
Description
Color Code
TRD0+
Transmit/Receive Positive
White/
Orange
TRD0-
Transmit/Receive Negative
Orange
TRD1+
Transmit/Receive Positive
White/Green
TRD2+
Transmit/Receive Positive
Blue
TRD2-
Transmit/Receive Negative
White/Blue
TRD1-
Transmit/Receive Negative
Green
TRD3+
Transmit/Receive Positive
White/Brown
TRD3-
Transmit/Receive Negative
Brown
3. Insert the CAT 6 rated cable in the appropriate GE 1 through GE 4
ports on the rear of the 434RG ONT.
Step 4: Connect Power
Plug the supplied 12 VDC Power Adapter into the 12V connection on the
rear of the chassis. Connect the AC plug to a standard 120 VAC outlet.
Step 5: Connect USB
There is a USB data connection on the rear of the 434RG ONT that can be
used for connection and communications with other computers and
electronic devices.
Step 6: Connect Coaxial Cable
The coaxial connection is located on the rear of the 434RG ONT. Connect a
standard coaxial cable from this connection to the coaxial connection on
the television where you want Internet capability.
Figure 4. 8-Pin Molex Connector
The UPS Power/Alarm Connections Table below defines each pin on the
connector.
NOTE
ADTRAN offers a UPS Cable assembly (P/N 1287402G1) for this
connector.
UPS Power/Alarm Table
The following table indicates which pin is associated with each alarm
provided through a UPS connection.
Pin-Out
Description
Alarm
Power Input (+12 VDC)
UPS Status - On Battery
UPS Status - Battery Missing
Signal Return
Power 12 V Return
UPS Status - Replace Battery
UPS Status - Low Battery
No Connection
NOTE
If an UPS is being used and is disconnected, the 434RG ONT will not
function and is not protected from power outages. In addition, a “Battery
Missing” alarm will be sent to the OLT.
LED STATUS
The LEDs are located beneath the plastic housing and are only visible
after power has been applied. The following table provides the LED status
during normal operations.
Label
POWER
Step 7: Connect UPS (optional)
CAUTION
DO NOT connect the Power Adapter and an UPS at the same time as this
will cause damage to the 434RG ONT. The ONT can be powered by either
power source, but not both simultaneously.
The 434RG ONT can typically use an un-interruptible power supply
(UPS) if desired. Power is supplied to the 434RG ONT by a local power
source with battery backup that utilizes the AC power at the customer
premises. The UPS powers the 434RG ONT and functions as a battery
backup unit (BBU) supplying continuous 12 VDC. Refer to the installation
material that is provided with the UPS when installing the BBU.
61287782F1-22A
FIBER
Status
Indication

Off
AC or battery off

Green
No Failure

Off
No connection to the OLT,
open fiber, failure at the ONT,
or power is Off

Green
DS signal present and is within
operating range
Green Flashing
Fast
Ranging in Progress or AOE
Auto-upgrade in progress
Label
INTERNET
GE 1-4
USB
2.4GHZ
5GHZ
PHONE 1-2
WPS
RF
Status
Indication
PROVISIONING

Off
No IP address configured on
WAN Interface, or Power is
Off

Green
WAN Interface is configured
with IP address

Off
Link is down or not connected

Green
Link is up
Green Flashing
Fast
Data is being sent or received
SPECIFICATIONS

Off
Power Off or no device
connected

Green
Device connected
Green Flashing
Fast
Data is being sent or received

Off
Power is Off, or Wireless
2.4GHz is Disabled

Green
Wireless 2.4GHz is Enabled
Green Flashing
Fast
Data is being sent or received
on 2.4GHz

Off
Power is Off, or Wireless 5GHz
is Disabled

Green
Wireless 5GHz is Enabled
Green Flashing
Fast
Data is being sent or received
on 5GHz

Off
Unequipped or on-hook and
not ringing

Green
Line is off-hook
Green Flashing
Slow
Line in ringing state

Off
Power Off or WPS is Disabled
Refer to the following for a list of all specifications for the 434RG ONT.
■ Electrical
♦ Voltage: 12 Volts typical
♦ Minimum Voltage: 10 Volts
♦ Maximum Voltage: 13.9 Volts
♦ Power Consumption: Typical 17.0 watts
■ Physical
♦ 10.8 inches high (27.5 centimeters)
♦ 7.4 inches deep (18.8 centimeters)
♦ 3.2 inches wide (8.1 centimeters)
♦ Weight: 1 pounds (0.45 kilograms)
■ Environmental
♦ Operational Temperature: 23°F to +113°F (0°C to +45°C)
♦ Storage Temperature: –40°F to 185°F (–40°C to +85°C)
♦ Relative Humidity: 90%, noncondensing
■ Optical
♦ TX min power: +0.5 dBm
♦ TX max power: +5.0 dBm
♦ RSSI max sensitivity: –27.0 dBm
♦ R.0X overload: –8.0 dBm
♦ TX wavelength: 1310 nm typical
♦ RX wavelength: 1490 nm typical
♦ RF 1550 nm, and no RF return

Green
WPS is Enabled
Green Flashing
Fast
WPS push button pressed and
device is ready to accept
connection

Off
No Video connection

Green
Video is streaming
Green Flashing
TBD
REGISTRATION ID
Registration ID is performed by Serial Number Activation. This occurs
when the 434RG ONT is “Discovered” by the OLT.
NOTE
If AOE Auto Upgrade is active, a new 434RG ONT installation will be
detected and a fast blinking FIBER LED will indicate a new software
download has commenced. This may take 5 - 10 minutes to complete.
When provisioning the 434RG ONT, refer to the ADTRAN 434RG ONT 2
POTS/4 GigE/RF/MoCA with Dual Band WiFi/MoCA2 User Interface Guide.
This guide provides basic information for getting the Internet, video and
data up and running using a web interface.
For complete provisioning information, refer to the Total Access 5000
GPON OLT User Interface Guide. This guide provides all the information
necessary to provision the PON to which the 434RG ONT is connected.
MAINTENANCE
The 434RG ONT does not require routine hardware maintenance for
normal operation. ADTRAN does not recommend that repairs be
attempted in the field. Repair services may be obtained by returning the
defective unit to ADTRAN. Refer to the warranty for further information.
Field support for software is provided through upgrade facilities.
SAFETY AND REGULATORY COMPLIANCE
Refer to the Safety and Regulatory Compliance Notice for this product
(P/N 61287782F1-17) for detailed safety and regulatory information.
Consultez l'avis sur la sécurité et la conformité à la réglementation pour ce
produit (61287782F1-17) pour obtenir des renseignements détaillés sur la
sécurité et la réglementation.
Warranty: ADTRAN will replace or repair this product within the warranty period if it does not
meet its published specifications or fails while in service. Warranty information can be
found online at www.adtran.com/warranty.
Trademarks: Brand names and product names included in this document are trademarks,
registered trademarks, or trade names of their respective holders.
©2015 ADTRAN, Inc. All Rights Reserved.
ADTRAN CUSTOMER CARE:
From within the U.S. 1.800.726.8663
From outside the U.S. +1 256.963.8716
C A U T I O N !
SUBJECT TO ELECTROSTATIC DAMAGE
OR DECREASE IN RELIABILITY.
HANDLING PRECAUTIONS REQUIRED.
PRICING AND AVAILABILITY 1.800.827.0807
*61287782F1-22A*

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Copy, Extract
Page Mode                       : UseNone
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Producer                        : Acrobat Distiller 10.1.16 (Windows)
Creator Tool                    : FrameMaker 10.0.2
Modify Date                     : 2016:03:07 17:23:12+08:00
Create Date                     : 2004:02:06 16:40:53Z
Metadata Date                   : 2016:03:07 17:23:12+08:00
Format                          : application/pdf
Title                           : untitled
Document ID                     : uuid:f4ed6d20-cdc8-4f78-b0cc-9bd8e8ce7a1c
Instance ID                     : uuid:54856958-9c41-4bb6-af02-3326cb7bd178
Has XFA                         : No
Page Count                      : 4
Language                        : en
Creator                         : FrameMaker 10.0.2
EXIF Metadata provided by EXIF.tools
FCC ID Filing: HDC434RG

Navigation menu