AEE Technology AEEP6000001 Action Camcorder User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2473405
Application ID	XuDpgm6DFvMvym5ygmq3vw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	105.53kB (1319141 bits)
Date Submitted	2014-12-15 00:00:00
Date Available	2014-12-16 00:00:00
Creation Date	2014-12-05 14:42:18
Producing Software	Adobe PDF Library 10.0.1
Document Lastmod	2014-12-12 10:33:08
Document Title	Users Manual
Document Creator	Adobe InDesign CS6 (Windows)

>Description of Indicator States
Quick Start Guide
This Guide provides quick-start instructions on how to use this product.
Please read it carefully before use, and keep it handy for future reference.
Appearance
Red light
Blink slowly
Blink once
Startup
Video recording
Photo shooting
Audio recording
WI-FI
the figure below:
Yellow light
Blink slowly
Blue light
Blink once
Blink slowly
Green light
Always on
Always on
Always on
Intercom cable
PTT port
Intercom port
Note: During charging, the green light blinks slowly; after full charging, the
green light is always on.
Preparation before Use
>Component Guide
Front
10
11
Camera
>Charging Mode
Interphone
After connection, this device can be used as a voice transmitter:
Use the Mini USB cable to connect the camera to the power adapter or a PC’s
USB port to charge the battery.
12
13
USB port
on the camera
Mini USB cable
14
15
16
17
Back
21
22
18
23
19
24
20
25
26
>Information on Display Screen:
Date & time
Operating mode

Video resolution
Remaining
recording time
000:01:57
Video length
Wi-Fi mode
+3
Battery level
USB port
on the PC
>Power On/Off
" for about 5s; the camera will start up after two
◆ Power On: Long press "
“beep” sounds are heard;
" for about 5s; the camera will shut down after
◆ Power Off: Long press "
three “beep” sounds are heard;
◆ Standby: When there is no operation within the preset time, the camera will
enter the standby mode after three “beep” sounds are heard; if the standby
function is disabled, it will not enter the standby mode.
◆ Wake up: Press any button on the camera to automatically wake it up.
Operation
>Video Recording
1.Start: Press "
" when "
" is shown at the display screen, the camera
will enter the video recording mode; press "
" again to start video recording.
At this moment, the red indicator at the upper left corner of the camera blinks
slowly, and " ●000:00:00 " is shown at the upper right corner of the screen to
indicate the length of video recorded.
2. End: Press "
are heard.
1.Power button		
2.2.5mm headset jack
3.PTT button		
4.Video recording button
5.Shutter button
6.Audio recording & Label button
7. Wi-Fi button
       8.View file / Back button
          9.Right arrow button
       10.Video recording / Photo indicator
11.Audio recording indicator 12.Wi-Fi indicator
13.Power indicator
14.Display screen
15.Menu button
16.Down arrow button
17.OK button		
18.Mini USB port		
19.PTT port		
20.Micro HDMI port
21.Infrared LED
22.Lens			
          23.Laser
       24.White LED / ultraviolet LED
25.MIC jack		
26.Buzzer
Power adapter
" again; the recording will be ended after two “beep” sounds
Talkback MIC
PTT button
1.Press the " PTT " button to transmit voice;
2.Release the " PTT " button to receive voice;
Connection to PC
Use the Mini USB cable to connect the camera to a PC, and power on the
camera:
Camera USB port
PC USB port
Mini USB cable
Enter " My Computer "; double click " Removable Disk " to find the following
icon:
Double click this icon to open the “Password” dialog box :
>Photo Shooting
In the photo shooting mode, the system will make a " click " sound when "
" is pressed once, indicating successful photo shooting.
>Audio Recording
1.The system will make a " beep " sound when " " is pressed, indicating the
start of audio recording;
2.The system will make two " beep " sounds when " " is pressed again,
indicating the end of audio recording.
>Wi-Fi
Enter the default password “12345678” and click " Connect ". Then, enter "
My Computer " again to view the files recorded by this device.
The system enters Wi-Fi mode when "
" is pressed. Wi-Fi mode is
available only in the video recording preview or photo shooting preview mode,
but not in the audio recording mode.
>PTT Intercom Function
Use the intercom cable to connect this device to the interphone, as shown in
To change the password, click the " Change Password " option in the
password entry interface to open the following dialog box:
6. G-Sensor: Enter “G-Sensor” setting; select " OFF " or " ON " as needed;
7.Language: Users can select among 10 languages including Chinese and
English;
8.Date/time: Users can set the date and time displayed on the camera;
9.Restore factory settings: Restore the camera to factory settings.
> Press the "
" button to enter the "
setting interface:
* Enter the original password in the first box
* Enter the new password in the second box
* Enter the new password again in the third box
▲Notice:
1.The new password entered in the second box must be identical to the one
entered in the third box;
2.Only 8-digit numeric password can be set.
" function
1.Click "
Screen Display
TV output
format
G-sensor
Recover factory
setting
Version
Language
Standby
Display time
View angle
180° photo
rollover
Video Only
Pre-Video
>App Installation
Display time
Please install the app "
" provided by AEE on your mobile device. You
can download " AEE Police " from " Google Play " or " Apple Store ", and then
install it on your device.
Time Lapse
Auto video
PIV
◆ Video - It is the video recording mode under normal conditions;
◆ Pre-video - In this mode, the system will enter the pre-video recording state
when the video recording button is pressed, and timer will start in advance;
and the end time of video recording can also be delayed.
◆ Time Lapse - One picture will be extracted within each preset period, and
the extract pictures will form a video;
◆ Auto Video - The system will automatically enter the video recording state
according to the preset countdown time;
◆ PIV - During video recording, the shutter button can be pressed to take
photos.
2. Resolution: 1080P(16:9)
960P(4:3)
720P(16:9)
Note: Press "
" to switch the menu;Press" " for rightward selection;
press " OK " for confirmation; press " M " to go back to the menu
interface.
3.View angle: here are four view angle options: Wide, Medium, Narrow, Small;
1. Warning tone: There are three options available: " OFF, 50%, and 100% ";
This device provides two bit rate options: High "
" and Normal "
" (When high bit rate is selected, pictures are clearer but the file size
increases.)
2. LED light: Select " LED " to enter the menu:
D&N
Ultraviolet LED
White LED
Laser
◆ Infrared LED mode: If enabled, the camera will have the infrared
function when the ambient light level is low; the system will enter this mode
automatically;
◆ Ultraviolet LED mode: If enabled, the camera can identify invisible
watermarks;
◆ White LED mode: This mode provides light compensation function; if
enabled, the photos taken or videos recorded will look brighter and clearer;
◆ Laser mode: This mode provides laser indication function; if enabled, the
focusing will be faster and more accurate.
3.“TITLE” can be set to " enable/disable " title display on the screen
4.Screen auto standby: Enter "
" setting:
OFF
②
OFF
Enter in 2min
If this function is enabled, when the memory is used up, the latest video
segment (10min long) will automatically overwrite the oldest video segment
(10min long); when this function is disabled, the video length is 15min, and
video recording cannot proceed when the memory is full.
6.180° rotation of picture:
If enabled, normal videos or photos can be taken when the camera is
operated upside down.
>Press the "
" button to enter the "
setting interface:
1.Description of "
Icon
⑤
⑩
Enter in 5min Enter in 10min
5.TV output mode: Enter “TV” setting:
NTSC
PAL
NTSC Format
PAL Format
>Wi-Fi Enabling and Connection
1. Press the Wi-Fi button; wait until the Wi-Fi blue indicator blinks slowly;
Note: When enabling or disabling the Wi-Fi function, please do not operate
any button on the camera.
2. Enable the Wi-Fi search function of the mobile receiving device; after
finding the wireless signal source of “AEE Magicam”, enter the password and
click “Connect” to connect to the camera. (Default password: AEE12345)
3. Click the app icon "
" the interface icon "
" will appear, and the
system will enter the following interface (Wi-Fi connection interface):
4.Bit rate:
5.Loop recording:
Infrared LED
:16M 4608x3456 4:3;
: 8M 3200x2400 4:3;
Wi-Fi Function
Bit rate
" to enter the execution mode setting interface:
Video
LED
:22M 5392x4032 4:3;
:12M 4000x3000 4:3;
The camera supports Wi-Fi function. The camera can be controlled remotely
after connected to a Wi-Fi enabled remote control or mobile device.
Video content
loop
" button to enter the "
Warning tone
Vedio resolution
Vedio
2.Resolution:
3.Time display:When this function is enabled, the camera will automatically
display the date and time of shooting at the lower right corner of each photo.
Angle
System Settings
> I. Press the "
setting interface:
" video recording
continuously at the set time interval; there are five interval options: 2S, 3S,
5S, 10S and 20S;
a photo will be taken 3s after the shutter
◆ Time-lapse shooting mode:
button is pressed;
a photo will be taken 5s after the shutter button is
pressed;
a photo will be taken 10s after the shutter button is pressed.
Icon
Total number of files
Wi-Fi state
Battery level
Remaining recordingtime /
number of photos allowed
Video length
Video recording mode
Photo shooting mode
Maximized preview
Current state icon
Parameter setting
Zoom out
Zoom in
Playback
Snapshot Mode
"photo shooting
Wi-Fi Connection interface
Click the corresponding icon on the main interface to remotely operate the
camera.
"modes:
Function description
Wi-Fi Connection interface
Note: "
" will appear if camera connection error. Select “Yes” to try
connection again; select “No” and click the "
" icon to enter the Wi-Fi
setting interface; click "
" enter camera can only viewing local files.
Function description
Normal
Snapshot
Auto continuous shooting
Time-lapse shooting
◆ Normal mode: Only one photo is taken when the shutter button is pressed;
3 photos per second
6 photos per second
◆ Snapshot mode:
8 photos per second;
◆ Auto continuous shooting mode: Photos will be taken automatically and
Note: camera can be operated up to 100 meters away via a mobile device
under a barrier-free environment.
▲Notice:
1. In case that there are operation commands from the camera and remote
controller at the same time, the one from the camera has higher priority;
2. The pictures above are limited to Android system, and they are for
reference only;
3. The function and operation of different versions of the app released on the
network platform may vary slightly from each other.
FCC Information and Copyright
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1)This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
FCC RF warning statement: the device has been evaluated to meet general RF exposure
requirement , The device can be used in portable exposure condition without restriction.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Tagged PDF                      : No
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Create Date                     : 2014:12:05 14:42:18+08:00
Metadata Date                   : 2014:12:12 10:33:08+08:00
Modify Date                     : 2014:12:12 10:33:08+08:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Instance ID                     : uuid:866d8025-f85d-4b9f-be71-b525301dc055
Original Document ID            : xmp.did:410F5CC78C74E4119C81978DFAE733FD
Document ID                     : xmp.id:601344DB497CE4119194D427C420D7C4
Rendition Class                 : proof:pdf
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Windows)
History Changed                 : /
History When                    : 2014:12:05 14:42:18+08:00
Derived From Instance ID        : xmp.iid:D1C791D4497CE4119194D427C420D7C4
Derived From Document ID        : xmp.did:410F5CC78C74E4119C81978DFAE733FD
Derived From Original Document ID: xmp.did:410F5CC78C74E4119C81978DFAE733FD
Derived From Rendition Class    : default
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 3
Creator                         : Adobe InDesign CS6 (Windows)

EXIF Metadata provided by EXIF.tools