AEE Wireless Technology AT206 Wireless Color Camera Kit User Manual S M206G190011 206AC
Shenzhen AEE Wireless Technology Co., Ltd. Wireless Color Camera Kit S M206G190011 206AC
Users Manual
2.4GHz Wireless Color Camera Kit
Weather-proof & Night Vision
Model: 206AC
Please read this manual carefully and thoroughly before any attempt to
install and operate this product and retain it for your future reference.
User's Manual
English
TABLE OF CONTENTS
INTRODUCTION 1~3
Notice
Restrictions
Maintenance
Approval Information (FCC/CE)
1
3
3
1~2
EU Environmental Protection
Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist.
Check with your Local Authority or retailer for recycling
advice.
PRODUCT 4~6
Package Contents
Feature Locations
Adapter
4
5
6
SPECIFICATIONS 13
TROUBLESHOOTING
INSTALLATION & USAGE 7~12
Installation
Camera Channel Setup
Fix the Camera
7~9
9-10
Night Vision
10
11
Receiver Mode Setup 11~12
14
INTRODUCTION
Thank you for purchasing this wireless camera kit. This product
eel confident that you will be pleased with the
quality and features of this product.
The camera features one CMOS image sensor and a transmitting module
to capture the image and transmit them wirelessly.
works at
ISM-2.4GHz frequency band, which could be legally used worldwide
without permission. We f
It is made of alloyed
shell and special weather-proof enclosure that protect it against powder
and water sprays. It passed the IP 54 testing.
Notice
Product Assurance: This camera will emit electromagnetic wave,
just like other wireless products, however, its transmitting power is
less than other wireless products such as mobile phones. The 2.4GHz
wireless camera meets wireless frequency security standards and
recommended indexes while working. These standards and indexes
are certificated by academic organization and represent the cogitative
research of the scientific workers who continuously explore and
annotate the involved fields. So we believe that our products are safe
for customers.
1
Approval Information
All our products meet the requirements of approval FCC or CE, and are
granted the FCC or CE certification. They are authorized to bear FCC
or CE mark.
Notice: This product may cause interferences with other wireless
equipment that operates at 2.4GHz ISM band. Please turn off one of
the equipments to eliminate the interference.
This product complies with standards including Low Voltage Device
Directive 73/23/EEC; EMC Directive 89/336/EEC and R&TTE
Directive 1999/5/EC. It passed the subject tests by the authority
concerned and is authorized to bear CE mark.
CE
2
FCC
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed or used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and the receiver.
-Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation Changes and
modification not expressly approved by the manufacturer or
registrant of this equipment can void your authority to operate this
equipment under Federal Communications Commissions rules.
1. DO NOT use this product to violate one's privacy. Monitoring one's
activities without consent is illegal and this product is not designed
and manufactured for such purpose;
2. DO NOT put this product near any medical equipment. Radio
waves might potentially cause breakdown of electrical medical
equipment. So this product should be placed at least 1 feet away
from any heart pacemaker. Radio waves might potentially
influence heart pacemaker and lead to respiratory disturbance;
3. DO NOT use this product for any illegal activities. We shall not be
responsible for any consequences of illegal acts committed by the
user.
Restrictions
1. Ensure the sufficient ventilation space is available;
2. Do not shake or strike the product;
3. Keep it dry and dustless and avoid exposing it to direct sunlight;
4. Do not place product near any magnetic objects;
5. Avoid putting the product in places where the constantly changed
temperature or humidity occurs;
6. Keep product away from heat sources such as electric heater;
7. Do not use the camera near aggressive chemicals;
8. Do not use the camera in the places which are enclosed by metal.
The surrounding metal like lifter, cabin, may shield the electromag-
netic wave, and result in failure of signal reception;
9. Please obey the local government's environment protection policy;
10. Please turn off the power when left unused;
11. Do not disassemble or repair the camera; doing so might cause
damages to the product.
Maintenance
3
① 2.4GHz Wireless Camera X1
② Antenna for Camera X1
③ 2.4GHz Wireless Receiver X1
④ Antenna for Receiver X1
⑤ Adapter for Camera X1
⑥ Adapter for Receiver X1
AV Cable X1⑦
⑧ Mounting Hardware X1
⑨ User's Manual X1
This package comes with the following items. Please check whether
they are all included in the packaging box, if one or some is missing,
contact the retailer for replacement.
Package Contents
PRODUCT
Note:
The pictures may vary from the actual objects.
4
① ② ③
⑤ ⑥ ⑦
⑧ ⑨
④
Feature Locations
1. CAMERA
2. RECEIVER
5
Power Jack
Universal
Bracket
Antenna
Hood
Channel Switch
MIC Hole
Lens
IR Lights
Power ON/OFF
Channel Indicator
Channel Select/
Mode Switch Button
Antenna
Mode Control
DC Power Jack
Audio Output
Video Output
6
This product always conforms to the authenticated AC adapter. The
adapter should be marked one of the following:
Note:
When using the power adapter, make sure the rating voltage on it is compatible
with that of the device to avoid potential damages resulting from incorrect usage
of power supply.
UL Mark
American power
supply authentication
SAA Mark
Australia power
supply authentication
GS Mark
German power
supply authentication
BS Mark
British power
supply authentication
European Union power
supply authentication
CE Mark PSE Mark
Japan power
supply authentication
Adapter
Installation
4. Connect the antenna to the receiver.
2. Connect the adapter (DC 12V 500mA) to the camera.
INSTALLATION & USAGE
7
3. Set the camera to the desired channel.
Default Setting
1 2 3 4
1. Connect the antenna to the camera and locate the camera to suitable
position.
7. Press the Channel Select Button "CH" on the receiver until the channel
indicator matches to the channel on the corresponding camera, and
the monitor/TV will display pictures.
8
Channel Select Button "CH”
5. Connect the power jack of adapter (DC 7.5V 300mA) to receiver.
Press the Power ON/OFF button and the channel indicator lights
up green.
" "
Power ON/OFF Button
AV
6. Connect the receiver to a monitor/TV with AV cable (yellow for video
and red for audio). Turn on the monitor/TV and select AV mode.
8. Adjust the brightness, contrast and color of the monitor/TV for the
perfect effect.
Fix the Camera
1.1 Drill holes on the mounting surface according to holes in the
universal bracket; Insert screw anchors into the holes;
1.2 Align holes in bracket, holes in the mounting surface, drive screws
through the bracket into the anchors. Adjust the angle of the
camera for surveillance.
1. Locate the camera
9
The camera can be located on the desk, floor, wall or ceiling. If you want
to fix the camera on the wall or ceiling please follow the steps below.
Note:
When locating the camera on the wall or ceiling you are recommended to adjust
the angle according to the above pictures.
Screw anchors
1.1 1.2
360°
1.2
On the CeilingOn the Wall
360°
Camera Channel Setup
This camera has 4 selectable channels. You could adjust the channel
switch of the camera to set the channel for multi-camera working or
avoiding the interference. Please tune the channel switch on the power
switch to the desired channel as the following diagram.
CH1=2,414MHz;
CH2=2,432MHz;
CH3=2,450MHz;
CH4=2,468MHz
Channel Frequency
Default Setting
1 2 3 4
10
Fastener 1
360°
Fastener 3
360°
Fastener 2
90°
2. Adjust the angle
2.1 Revolve Fastener 1 and adjust the camera to an appropriate angle;
2.2 Revolve Fastener 2 and adjust the camera to an appropriate angle;
2.3 Revolve Fastener 3 and adjust the camera to an appropriate angle.
Tip: Fastener 1 and Fastener 3 can be revolved universally.
The receiver can support up to 4 cameras working at the same time.
You are allowed to set the Mode Control as described below. The
Mode Control has the precedence over other buttons.
Default Setting
Receiver Mode Setup
CHANNEL M
ON
OFF
11
Built-in IR lights for
15m Night Vision
The built-in Infra-red lights in camera provide night vision for 24hours
surveillance. The Infra-red lights will be automatically activated at night
or in dark places. The picture will turn to Black & White (monochrome)
in Night Vision status.
1CH1 Enable (Default)
CH1 Disable
ON:
OFF:
2CH2 Enable (Default)
CH2 Disable
ON:
OFF:
3CH3 Enable (Default)
CH3 Disable
ON:
OFF:
4CH4 Enable (Default)
CH4 Disable
ON:
OFF:
Channel Set
CHANNEL M
ON
OFF
You can confirm which channel is set to receive signal from correspond-
ing camera. With this function, set the unused channels to OFF, so that
Night Vision
Channel-scan Set
Manual Mode (Default)
Channel-scan Mode
M:
L:
Tip:
You could also activate channel-scan function by pressing and holding the
Channel Select Button more than 5s at Manual mode and deactivate
it by pressing the button again.
"CH"
CHANNEL M
ON
OFF
1. Manual mode: Slide Mode Control switch to M to enter Manual
mode. In this mode, the receiver channel won't change until you
press the Channel Select Button ;“CH"
12
they will be skipped during the Manual mode or Channel Scan mode.
Note:
If all channels are on OFF position the default setting is CH1.
2. Channel Scan mode: Slide Mode Control switch to L enter channel
scan mode. In this mode, all the available channels will display one
by one looping in turn per 5s. So you can watch the situations from
4 different cameras via one receiver. Slide the Mode Control switch
to M to exit.
Channel Select Button "CH”
Notes:
Press the Channel Select Button at the channel scan mode, the current
channel will be switched to the next one immediately (less than 5s).
“CH"
Press and hold more than 5s to activate;
Press again to deactivate.
SPECIFICATIONS
* Actual transmission may vary according to the weather, location,
interference and building construction.
* Specifications are subject to minor change without prior notice.
Items Value
Transmission Frequency ISM 2,400MHz~ 2,483MHz
Antenna Type Omni
Power Supply DC 12V 500mA
Storage Humidity ≤85% RH
Storage Temperature
Imaging Sensor CMOS
CMOS Total Pixels 628*582 (PAL)/ 510*492 (NTSC)
S/N Ratio 40dB (AGC OFF)
Horizontal Resolution 380 TV Lines
Minimum Illumination 5 Lux/F1.2 & 0 Lux (IR ON)
Transmission Power 10mW (CE)/2mW (FCC)
Transmission Distance 100m (Without Block)
Consumption Current
300 mA (IR ON)/ 90mA(IR OFF)
Dimensions (W*D*H) Ø53mm*80mm (Main Body)
Weight Approx.249g (Main Body)
Receiving Sensitivity ≤-85dBm
Consumption Current 240mA (Max.)
Video Output Level
Audio Output Level
Dimensions (W*D*H)
Weight Approx.138g (Main Body)
Operating Temperature
115mm*85mm*24mm (Main Body)
er
Cama
Receiver
-20 C~+60 C /-4 ~+140
o o o o
F F
-10 C~+50 C /+14 ~+122
o o o o
F F
Power Supply DC 7.5V 300mA
Night Vision Range 15m
Weather-proof Level
IP54 (Main Body)
1.2±0.4V @10k
p-p Ω
13
1.0±0.2V @75
p-p Ω
TROUBLESHOOTING
When you experience the operation problems, please check and try
the following yourself before claiming that it is the defective product
or consulting the experienced technician.
Possible Reasons/Solutions
Check whether the camera/receiver
is connected to power supply and
powered on.
1. Check if the channel of receiver is
the same as that of camera;
2. Check the distance & blocks.
Mismatching the TV system of PAL
or NTSC.
1. Interfered with other devices;
2. Check the distance & blocks.
Interfered with other devices nearby;
Remove or turn off such devices.
Abnormal Phenomena
No image
Snowflakes
on image
Normal image
No color
Ghost image
No sound
Noisy
Noisy
Normal sound
Normal sound
S-M206G190011