AGAIT Technology AGAIT-WM8X 2.4G Wireless Optical Mouse User Manual manual

AGAIT Technology Corporation 2.4G Wireless Optical Mouse manual

manual

AGAIT Technology Corporation 2.4G Wireless Optical Mouse users manual Basic Brand name: VENTO Package Contents:  1.Product: 2.4G Wireless Optical Mouse Modle: MW-81; MW-80; MW-82  Quick start guide System Requirement:  IBM PC or compatibility machine  Windows 7/Vista/XP/2000  USB port Quick start guide:  Welcome for purchasing this product, we will show you how to use this device in the following steps. Installation:  Take out Nano Receiver  Connect Nano Receiver to PC, until the automatic installation is completed.  Open the battery cover on bottom and insert battery.  Finish above steps, click left or right button, then you can start to use it. Caution:  Please don’t try to disassemble this device by yourself, it may bring danger. Button definition:  “DPI Switch” :Mouse dpi switchable between 800/1600dpi. Note: If you do not move the mouse a long Time (more than 10 minutes), it will enter Power-saving mode, In your PC off, or unplug The receiver, the mouse will enter the same Power-saving mode, then whether you press The mouse button the mouse is not any work, Only if your PC to open, so that the receiver Correctly work by pressing the mouse left/ Middle/right keys at any one of three buttons In order to let your mouse wake-up into the Normal operating mode. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices). This equipment complies with Part 15 of FCC RF Rules. Operation is subject to the following two conditions: 1) This device may not cause interference and 2) This device must accept any interference, including interference that may cause undesired operation of the device. Caution! The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment.

Navigation menu