AGAIT Technology AGAIT-WM8X 2.4G Wireless Optical Mouse User Manual manual
AGAIT Technology Corporation 2.4G Wireless Optical Mouse manual
manual
AGAIT Technology Corporation
2.4G Wireless Optical Mouse users manual
Basic Brand name: VENTO
Package Contents:
1.Product: 2.4G Wireless Optical Mouse
Modle: MW-81; MW-80; MW-82
Quick start guide
System Requirement:
IBM PC or compatibility machine
Windows 7/Vista/XP/2000
USB port
Quick start guide:
Welcome for purchasing this product, we will show you how to use this device in the following steps.
Installation:
Take out Nano Receiver
Connect Nano Receiver to PC, until the automatic installation is completed.
Open the battery cover on bottom and insert battery.
Finish above steps, click left or right button, then you can start to use it.
Caution:
Please don’t try to disassemble this device by yourself, it may bring danger.
Button definition:
“DPI Switch” :Mouse dpi switchable between 800/1600dpi.
Note: If you do not move the mouse a long
Time (more than 10 minutes), it will enter
Power-saving mode, In your PC off, or unplug
The receiver, the mouse will enter the same
Power-saving mode, then whether you press
The mouse button the mouse is not any work,
Only if your PC to open, so that the receiver
Correctly work by pressing the mouse left/
Middle/right keys at any one of three buttons
In order to let your mouse wake-up into the
Normal operating mode.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when
connecting to computer or peripheral devices).
This equipment complies with Part 15 of FCC RF Rules. Operation is subject to the following two conditions:
1) This device may not cause interference and
2) This device must accept any interference, including interference that may cause undesired operation of the device.
Caution!
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this
equipment. Such modifications could void the user authority to operate the equipment.