AIJI System AP-100 Fixed WLL Telephone (CDMA) User Manual
AIJI System Co., Ltd. Fixed WLL Telephone (CDMA) Users Manual
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 529881 |
| Application ID | i3/xae3mKKfDIjxbwLlcRA== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 171.38kB (2142299 bits) |
| Date Submitted | 2005-04-08 00:00:00 |
| Date Available | 2005-04-08 00:00:00 |
| Creation Date | 0000-01-01 00:00:00 |
| Document Lastmod | 2005-04-01 14:50:42 |
| Document Title | Users Manual |
CDMA2000 1X RTT Fixed
Wireless Telephone
Quick Start Guide & User’s Manual
MODEL : AP Series
CDMA2000 1X RTT WLL
CDMA2000 1X RTT WLL
Model : AP Series
REFERENCE & WARNING
REVISED HISTORY
DATE
Feb 28, 2005
CONTENTS OF CHANGES
Initial Release
Model : AP Series
REMARK
Please read this manual before operating the
phone, and keep it for the future reference.
2005 Aiji System Co., Ltd. All rights reserved. No
reproduction in whole or in part is permitted,
without prior written approval.
The information in this user manual is subject to
change without notice and does not represent a
commitment on the part of Aiji System Co., Ltd.
Model Number: AP Series
Version: Initial Release, Feb. 28, 2005
Follow the directions on this page to start using
your phone now. For more information, refer to
the rest of this user manual.
Aiji System Co.,Ltd.
Aiji System Co.,Ltd.
CDMA2000 1X RTT WLL
Model : AP Series
CDMA2000 1X RTT WLL
Model : AP Series
SAFETY INFORMATION
WARNING
• To reduce the risk of fire or electric shock, do not expose this
product to rain or moisture.
•Do not use this product near swimming pools or other bodies of
water.
•Before using your phone, check your output voltage.
Hospitals or health care facilities may be using equipment that
could be sensitive to external RF energy.
• If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
IMPORTANT
Before installing or operating this product read this information.
OPTIMAL PHONE PERFORMANCE
• Do not operate your product when holding the antenna, or when
someone is within four inches (ten centimeters) of the antenna.
Holding the antenna affects call quality and may cause the
telephone to operate at a higher power level than needed.
•For the best call quality, keep the antenna free from obstructions
and point the antenna straight up.
•Do not use the unit with a damaged antenna. Have your antenna
replaced by a qualified technician immediately. Use only a
manufacturer-approved antenna. Non-approved antennas,
modifications, or attachments could impair call quality, damage the
phone.
•RF energy may affect improperly installed or inadequately shielded
personal medical devices such as pace markers, hospital monitor.
Consult the manufacturer of any personal medical devices to
determine if they are adequately shielded from external RF energy.
Turn your terminal OFF in health care facilities when any regulations
posted in the areas instruct you to do so.
Aiji System Co.,Ltd.
▷Reorient or relocate the receiving antenna
▷ Increase the distance between the radio or television and the
telephone.
▷ Connect the equipment into an outlet on a circuit different from
that to which the terminal is connected.
▷ Consult you Authorized AIJI Dealer of an experienced radio/TV
technician for help.
• Use only the battery, antenna and AC power supply provided by
AIJI. Using any other type will invalidate the warranty.
• Only authorized personnel should service the phone and its
accessories. Faulty installation or service may be dangerous and
may invalidate the warranty.
• Do not use the unit in designated "No Cellular Phone Use" area.
• Avoid exposure to high temperature or humidity.
Aiji System Co.,Ltd.
CDMA2000 1X RTT WLL
Model : AP Series
• Avoid wetting the unit with any liquids. If the unit gets wet, turn the
power off immediately and remove the backup battery and AC power
supply. If the unit is inoperable, then return to the service agent for
service.
• Avoid shock or impact.
• We recommend you to charge the backup battery before initial use.
Backup battery may be discharged during delivery.
CDMA2000 1X RTT WLL
Model : AP Series
CDMA2000 Fixed
Wireless Te l e p h o n e
Quick Start Guide
CARE AND SERVICE
MODEL…AP Series
• Unplug the telephone from the wall outlet and remove antenna (or
disconnect antenna cable) before cleaning. Do not use liquid or
aerosol cleaners. Use a damp cloth for cleaning.
• If the unit fails for any reason, do not attempt to disassemble;
contact the telephone service provider for assistance.
• If any of the following conditions exist; unplug the unit at the wall
plug, remove battery, and call the service provider.
▷
▷
▷
▷
▷
The power supply cord is damaged or frayed.
Liquid has been spilled into the unit.
The unit has been exposed to rain or water.
The unit has been dropped or damaged.
The unit does not work normally by following the operating
instructions.
Aiji System Co.,Ltd.
Aiji System Co.,Ltd.
CDMA2000 1X RTT WLL
Model : AP Series
1. Getting to Know Your Phone
1.1 Key Definition
Description
Key
1. Activate MENU state (also MENU state in the call state)
CDMA2000 1X RTT WLL
Model : AP Series
1.3 Icons
1.3.1 Standby Icons
Icon
Description
Icon
Description
Signal strength in the service area.
Lock mode
1. Set the [DND (Do Not Disturb)] function. It prohibits incoming
calls when the phone is in the idle-state
In use
Off-hook mode
1. Send a dialed number when a call is placed and/or to redial
and \ send the last number dialed
1. Sound: 31 Ring tones/Alerts/Volume
2. Volume up (also function as a cursor in the edit state)
No Service
Alarm/Morning Call
New message
Battery status
Voice message
AC Power Mode
1. Activate SMS and Voice Mail state
1. Phone book
2. Volume down (also function as a cursor in the edit state)
1. Store phone numbers and any settings you select in the menu
within the phone's memory.
1. Delete the last digit/dial number (also exit without storing in the
MENU state)
2. Deactivate a state - No store a value
1.3.2 Sub Icons
Description
Icon
Icon
Description
Message sent successfully
Mobile
Message sending fail
Home
Read Message
Office
Locked Message
Other
3-way Calling
Incoming Call
Group
Outgoing Call
1. To make or receive a call using the speakerphone.
1.2 External Features
Features
Description
Antenna
Adjusting direction of antenna improves the voice and
data quality
RF Connector
For connection to basic antenna or external antenna
DC Power Jack
For connection to power adapter
RS-232C port
For connection to PC for Internet
Power Switch
To turn on/off the phone
Aiji System Co.,Ltd.
Missed Call
Aiji System Co.,Ltd.
CDMA2000 1X RTT WLL
Model : AP Series
CDMA2000 1X RTT WLL
Model : AP Series
2. Basic Functions
Turn on
your phone
1. Connect handset to the main set
2. Connect the antenna
3. Open the battery cover at the bottom of the main set
and Insert backup battery.
4. Turn "ON" the battery switch.
5. Close the battery cover and connect the AC power
supply.
Make a Call
1. Pick up the handset or press
2. Enter phone number
CDMA2000 Fixed
Wireless Te l e p h o n e
U s e r ’s Manual
button.
MODEL…AP Series
When the phone rings, pick up the handset or press
Answer a Call button
End a Call
Replace the handset or press
Redial
1. Pick up the handset or press
2. Press
button.
button
button.
1. Pick up the handset or press
button.
2. For the location numbers of one digit, press and hold
(1- touch/2-touch)
the corresponding digit key.
For the other entry numbers, press the first digit key(s)
briefly and hold down the last digit key.
Speed dial
10
Read new
message
Press
-> Inbox -> Select Card or Phone
Phone book
search
Press
button -> Enter the name
Aiji System Co.,Ltd.
Aiji System Co.,Ltd.
11
CDMA2000 1X RTT WLL
Model : AP Series
CDMA2000 1X RTT WLL
CONTENTS
1. Introduction
15
1.1 Highlights
1.2 Check Components
1.3 Installation
15
17
18
1.3.1 Connect Components
1.3.2 Installation Steps
1.3.3 Place the Terminal
1.4 Phone Overview
1.4.1 Key Definition
1.4.2 External Features
1.4.3 Viewing the Display Screen
1.4.4 Check the LCD Display
18
20
21
22
23
23
24
24
2. General Functions
25
2.1 Making a Call
2.2 Correcting Dialing Mistakes
2.3 Receiving Calls
2.4 Lock Mode (Quick)
2.5 Call Waiting / Call Forwarding
2.5.1 Call Waiting
2.5.2 Call Forwarding
2.6 Mute
2.7 Redialing Calls
2.8 Adjusting the Volume
2.9 Signal Strength
2.10 Caller ID Display
2.11 Speed Dialing
2.12 Phone book Features
2.12.1 Personal Phone Book Memory
26
26
26
26
27
12
Aiji System Co.,Ltd.
27
27
27
27
28
28
28
29
29
29
Model : AP Series
29
2.12.1.1 Saving Numbers in Your Personal Phone Book
2.12.1.2 Retrieving Numbers
2.12.2 Making a call from Your Phone Book
2.12.2.1 One-Touch Speed Dialing
2.12.2.2 Two-Touch Speed Dialing
2.12.2.3 Three-Touch Speed Dialing
2.12.2.4 Dialing from a Call History
30
30
30
30
31
31
3. Menu Features
3.1 General Guidelines to MENU Access and Settings
3.2 List of Menu State
3.3 Call History
3.3.1 Recent Calls
3.3.2 Incoming Calls
3.3.3 Outgoing Calls
3.3.4 Missed Calls
3.3.5 Call Timer
3.3.6 Call Memo
3.3.7 Clear History
3.4 Phone Book
3.4.1 Find Entry
3.4.2 New Entry
3.4.2.1 Creating a New Entry in the Phone's Memory
3.4.2.2 Storing Phone Numbers at Call's End
3.4.3 Edit Group
3.4.4 Memory Status
3.4.5 Phone Infomation
3.5 Message
3.5.1 Inbox
3.5.2 Write Message
3.5.2.1 How to write a Text
3.5.3 Outbox
3.5.4 Delete Messages
3.5.5 Message Settings
31
31
31
37
37
37
37
38
38
38
39
39
39
39
39
40
40
40
41
41
41
42
43
43
43
43
Aiji System Co.,Ltd.
13
CDMA2000 1X RTT WLL
Model : AP Series
3.5.5.1 Display Message
3.5.5.2 Auto Save
3.5.5.3 Auto Delete
3.5.5.4 Font Size
3.5.5.5 Delivery Acknowledgement
3.5.5.6 Store Message
3.6 Sound
3.6.1 Ring Tones
3.6.2 Alerts / Tones
3.6.2.1 No Service
3.6.2.2 Minute Minder
3.6.2.3 Connect Tone
3.6.2.4 Disconnect
3.6.3 Volume
CDMA2000 1X RTT WLL
44
44
44
44
44
45
45
45
45
46
46
46
46
46
Model : AP Series
Chapter 1. Introduction
1.1 Highlights and Features of AP series
Thanks for purchase of the AP Fixed Wireless Telephone. This
telephone has been designed to operate on the latest CDMA 2000 1x
RTT technology. This technology has greatly enhanced voice clarity
and can provide various advanced features. Basically this telephone is
designed for the desktop and the use in the office and a house. This
can be easily installed in any place using the wall mount bracket
(Optional Accessory).
3.7 Phone Setting
47
The telephone provides:
3.7.1 Hot Line
3.7.2 Alarm Clock
3.7.3 Language
3.7.4 Font Select
3.7.5 LCD Contrast
47
47
47
48
48
• 4-line LCD display with status indicator.
- 8-line LCD display to view text message easily.
3.8 Security
3.8.1 Lock Phone
3.8.2 Change Code
3.8.3 Restrict
3.8.4 Reset Phone
3.8.4.1 Reset Settings
3.8.4.2 Reset All
3.8.5 PIN
48
• 128 x 64 Graphic LCD display.
• Window UI (Graphic User Interface): Pop-Up Animation Menu.
• Phone book
- 200 memory locations to store names and telephone numbers
in the phone.
- Store name, 4 phone numbers (Mobile/Home/Office/Other),
group and ring sound per location.
- Group editing available.
48
49
49
49
49
49
49
3.9 Data Service
•Brilliant 16-polyphonic midi sound
50
•A choice of 31 rings and melodies.
Appendix A : Specification
51
•Alarm (Morning Call): Various setting options
(Once/Daily/Weekdays only (Mon ~ Fri)/Weekends)
•50 text messages can be stored in the phone.
14
Aiji System Co.,Ltd.
Aiji System Co.,Ltd.
15
CDMA2000 1X RTT WLL
Model : AP Series
• 99 Voice Mail.
• Call History (Record&Time):
Recent_30/Incoming_20/Outgoing_20/Missed_20
•
•
•
•
•
Speed dialing (1- touch, 2-touch and 3-touch) with a 200 number memory.
Call Forwarding/Call Waiting/Caller ID/Last Number Re-Dial
Alert (No Service / Minute Minder / Connect Tone / Disconnect Tone)
Emergency Call
Hot Line
•
•
•
•
•
Restrict Call
Security
Internet connection up to 153Kbps through RS-232C serial data port.
Support the Authentication Key (A-Key)
Various supplementary services such as Last Number Redial, Dial
Tone and On Hook etc.
• Optional Functions: R-UIM, Speaker phone, LCD backlight, Button backlight
CDMA2000 1X RTT WLL
1.2 Check Components
•Your package contains the following items. The illustrations below may look
different from your phone and accessories;
[ Main Unit with handset ]
[ User’s Manual ]
16
Aiji System Co.,Ltd.
Model : AP Series
[ Dipole Antenna ]
[ AC/DC power Adapter ]
[ Backup Battery ]
[ Power Cord ]
Aiji System Co.,Ltd.
17
CDMA2000 1X RTT WLL
Model : AP Series
• In addition, you can obtain the following accessories for your phone
from our local dealer in your country.
1) RS-232C Data Cable
CDMA2000 1X RTT WLL
Model : AP Series
•Connect curl cord of handset assembly to the RJ-11C port located at
the left side of the terminal.
2) Wall Mount Bracket
• Please make sure that these components are present before you
begin the unit installation. And then compare the following figures and
components. If components are missing or damage is found, contact
the store where you purchased the unit immediately.
1.3 Installation
You should follow each step carefully as shown below in order to
guarantee proper operation of CDMA Fixed Wireless Telephone.
•Open the battery case, securely connect the battery cord, place the
backup battery pack and close the case.
1.3.1 Connect Components (See the figures in "Installation Steps")
•Connect the antenna to the TNC antenna connector
located at the top side of the terminal. If you placed the
terminal on the flat surface, bend the antenna up right.
18
Aiji System Co.,Ltd.
Aiji System Co.,Ltd.
19
CDMA2000 1X RTT WLL
Model : AP Series
• Check output voltage.
• Connect the AC/DC Adapter cable to the DC input port located at the
topside of the terminal.
CDMA2000 1X RTT WLL
Model : AP Series
4) Open the battery cover at the bottom of the main unit.
5) Insert back-up battery in the bottom of the main unit. (Give care to polarity)
6) When you use terminal first, please turn "on" the battery switch.
7) Replace the Battery cover.
8) Connect the AC power supply.
Notice
Before using the terminal,please check battery
switch is on, after switching on it, use the phone.
▷If it is good, beep tone is heard.
▷it is not good (Booting is fail or beep tone is not heard), you have to
connect the adapter or backup battery, again.
•Please follow the below to get better voice quality;
1) Keep away from electrical appliances such as TV, computer, radio
and so on.
2) Keep terminal in a high and central location with no obstructions,
such as metal walls.
3) Raise the integral antenna of terminal to get maximum strength of
receive signal as shown figure at the next page.
1.3.3 Place the Terminal
•Place the terminal on the stable flat secure surface area (desk, table,
etc.). Serious damage may result if the unit falls. Do not place the
unit on, or within 1 meter of heaters or radiators. This unit is designed
for desktop usage. Avoid direct exposure to the sunlights and damp
area.
•Read the SAFETY INFORMATION located at the first part of this
document before you place the terminal.
1.3.2 Installation Steps
Please follow the below procedure to install the unit properly.
1) Connect Base handset to the handset connector.
2) Connect the antenna to the TNC connector (Turn right).
3) Bend the antenna up right.
20
Aiji System Co.,Ltd.
Aiji System Co.,Ltd.
21
CDMA2000 1X RTT WLL
Model : AP Series
CDMA2000 1X RTT WLL
Model : AP Series
1.4.1 Key Definition
1.4 Phone Overview
Key
The following shows key components of
your mobile phone.
Description
1. Activate MENU state (also MENU state in the call state)
1. Activate SMS and Voice Mail state
5.TNC Antenna
1.Handset
6.LCD Screen
2.Menu Key
3.Mute Key
7.OK Key
9.Clear Key
4.Curl Cord
8.Navigation Key
10.Alphanumeric
Keypad
1. Set the [DND (Do Not Disturb)] function. It prohibits incoming
calls when the phone is in the idle-state
1. Send a dialed number when a call is placed and/or to redial
and \ send the last number dialed
1. Sound: 31 Ring tones/Alerts/Volume
2. Volume up (also function as a cursor in the edit state)
1. Phone book
2. Volume down (also function as a cursor in the edit state)
1. Store phone numbers and any settings you select in the menu
within the phone's memory.
1. Delete the last digit/dial number (also exit without storing in the
MENU state)
2. Deactivate a state - No store a value
3. Press this key once in a menu, to go back one level.
1. Off Hook mode
2. To make or receive a call using the speakerphone.
11.Lock mode Key
12.OHD Key
1.4.2 External Features
Features
22
Aiji System Co.,Ltd.
Description
Antenna
Adjusting direction of antenna improves the voice and
data quality
RF Connector
For connection to basic antenna or external antenna
DC Power Jack
For connection to power adapter
RS-232C port
For connection to PC for Internet
Power Switch
To turn on/off the phone
Aiji System Co.,Ltd.
23
CDMA2000 1X RTT WLL
Model : AP Series
CDMA2000 1X RTT WLL
1.4.3 Viewing the Display Screen
Chapter 2. General Functions
The LCD shows icons on the top of the LCD screen. The icons indicate
the setting status and operating status of the phone.
Icon
Description
Icon
Description
Signal strength in the service area.
Lock mode
In use
Off-hook mode
No Service
Alarm/Morning Call
New message
Battery status
Voice message
AC Power Mode
1.4.4 Check the LCD Display
•After you follow the installation instruction 1.3.1 to 1.3.3, please
check the LCD for normal operation.
•If you may not see status of service, please repeat the 5th
instruction of 1.3.2. And conform Fixed Wireless Telephone to get
the proper signal strength from service operator system.
※The adapter type(with power cord) may be different by country
adaptation.
24
Aiji System Co.,Ltd.
Model : AP Series
2.1 Making a Call
When you make a call, follow these simple steps:
1) Make sure your phone is turned on.
2) Pick up the handset or press
button.
3) Listen for dial tone. If the service is not available, you hear a no
service tone.
4) Enter the phone number, with area code (if needed).
5) Wait for the Auto Time-out or press
• If the phone is locked, take the following step.
→ 6. Security Enter Password → 1Lock Phone Select ◉ Unlock
•Call Failed indicates that the call did not go through. Please
check Antenna Icon and call again a few minutes later.
6) The call is connected and you can start conversation.
7) To end the call, replace the handset or press
button.
Tip 1: To redial your latest outgoing call, press
to dial.
Tip 2: Your phone offers many different ways to make calls, including
Speed Dialing ("Using One / Two / Three Speed Dialing" on page
30) and using Call History ("Viewing Call History (Incoming,
Outgoing and Missed)" on page 37).
Tip 3: This phone has been restricted If this message displays on
your screen, then outgoing calls are in restricted mode. You can
only dial phone numbers saved in Emergency.
•If you want to turn off this function, take the following step.
→ 6. Security → Enter Password → 3 Restrict
→ 2 Outgoing Call → Select ▣No
Tip 4: When speed dialing is enabled, type in the phone book entry
number and hold the last digit until the call is made.
Aiji System Co.,Ltd.
25
CDMA2000 1X RTT WLL
Model : AP Series
2.2 Correcting Dialing Mistakes
If you make mistakes while dialing a number, press
once to erase
the last digit entered or hold down
for at least two seconds to delete
all digits.
2.3 Receiving Calls
1) Make sure your phone is on. If your phone is off, incoming calls go to
voicemail.
2) When phone rings, pick up the handset (or press
(Optional
function)).
3) Start conversation.
4) To disconnect the call, replace the handset (or press
(Optional
function)).
2.4 Lock Mode (Quick)
Use to prevent others from using your phone.
1) In standby mode, to activate the Lock Mode quickly, press the #
for 3 seconds. Lock mode Setting! will be displayed.
The lock code (password) is commonly the last 4 digits of your phone number.
Note To cancel the Lock Mode, Press
→ 6. Security Enter Password
1 Lock Phone Select Unlock
CDMA2000 1X RTT WLL
Model : AP Series
2.5.1 Call Waiting
Your WLL service may offer a call waiting function. While a call is in
progress, you may hear two beeps indicating another incoming call.
When call waiting is enabled, you may put three active calls on hold while
you answer the other incoming call.
1) Press
to receive a waiting call.
2) Press
again to switch between calls.
2.5.2 Call Forwarding
This feature enables incoming calls to be rerouted to a number that you
specify. For example, you may wish to forward your business calls to
your mobile phone while you are not in the office.
2.6 Mute
The mute function prevents the other party from hearing your voice, but
allows you to hear the other party.
1) Press
during a call.
2) To cancel Mute, press
again.
2.7 Redialing Calls
2.5 Call Waiting / Call Forwarding
This menu contains network services, which allow you to forward
incoming calls when you can't answer a call, to receive a second call.
Please contact your service provider to check their availability and
details.
26
Aiji System Co.,Ltd.
1) Press
to redial the last number in call history (Recent Calls).
•You can also redial any of the last 60 numbers you have dialed,
received and missed. The last 30 numbers are stored in the call
history (Recent Calls) list. (See the Call History List on page 37.)
Aiji System Co.,Ltd.
27
CDMA2000 1X RTT WLL
Model : AP Series
2.8 Adjusting the Volume
The volume keys on the top side of the phone can be used to adjust the
earpiece, ringer, and keypad beep volumes. The upper key (
) is
used to increase and the lower key (
) is used to decrease the
volume.
•You may adjust the earpiece volume during a call.
CDMA2000 1X RTT WLL
Model : AP Series
2.11 Speed Dialing
Speed dialing is a convenient feature, which allows you to make phone
calls quickly and easily. Your phone recalls the phone number from your
personal directory, displays it briefly and then dials it.
1) From off-hook stage, press the memory number (1 through 200)
corresponding to the appropriate entry, and hold for a few seconds.
Tip 1: You should check with your service provider to ensure they
offer this feature.
2.9 Signal Strength
The call quality depends on the signal strength in your area. The current
signal strength is displayed on the screen as the number of bars next to
the signal strength icon: The more bars, the better the signal strength. If
the signal quality is poor, move to an open area. If you are in a building,
the reception may be better near a window. For maximum reception,
make sure that the antenna is fully extended.
2.10 Caller ID Display
Caller ID lets you know who is calling by displaying the number of the
person calling when your phone rings. If the caller's name and number
are already stored in your phone book, the corresponding name appears
with the number.
Tip 1: The LCD of the phone displays information such as:
•Date and Time
•Caller ID (caller's information [name and/or number])
•Number of missed calls
•Number of new messages
•No service status and Power Save Mode.
The phone will display most recent information.
28
Aiji System Co.,Ltd.
2.12 Phone Book Features
You can store up to 200 entries in your phone book with easy access to
your most frequently dialed phone numbers and make a call by pressing
entry number in off-hook state.
2.12.1 Personal Phone Book Memory
The phone has 200 personal phone book entry numbers where you can
store up 4 phone numbers with 16 digits for each phone number
2.12.1.1 Saving Numbers in Your Personal Phone Book
1) Input the phone number that you want to save (up to 16 digits).
2) Press
→ Select '1.Save' → Press
3) Select your desired label types Mobile, Home, Office, Other
using the upper key (
) and the lower key (
).
4) Enter a name for the phone number (up to 16 characters)Press
If you do not want to enter a name, go to the next step.
5) You may select the desired ID ring type and group
No Group, Family, Friend, Office, Other.
Aiji System Co.,Ltd.
29
CDMA2000 1X RTT WLL
6) Press
Model : AP Series
CDMA2000 1X RTT WLL
. A confirmation prompt "Saved" displays on the phone.
2.12.1.2 Retrieving Numbers
1) Press
, the sub-menu appears.
2) Enter the character(s) that you want to search for
(such as the few letters of the name.) → Press
3) You will see a list of matches. → Select the one using the upper
key (
) and the lower key (
).
4) Press
to see specifics in that memory location, or press
place the call.
to
You can place a call from any memory location either by using speed
dialing or by entering the phone number and pressing
in
off-hook state.
2.12.2.1 One-Touch Speed Dialing
This feature enables you to store your 9 (nine) most frequently used
numbers in your phone book in memory locations (1 through 9).
1) For entries 1 through 9, you can use one-touch dialing by pressing
and holding the corresponding key to the memory location to be dialed.
OR
1) Press a digit, then press
This feature enables you to dial numbers in your phone book through
three keys (for entries 100 to 200.)
1) Press the first and second digits.
2) Press and hold the key of the third digit.
OR
1) Press the first, second and third digits, then press
2.12.2.4 Dialing from a Call History
1) From a call history list, press the scroll keys to go to the number you
want to call.
2) Press
Chapter 3. Menu Features
3.1 General Guidelines to MENU Access and Settings
1) Press
. '1. Call History' menu will appear on the display screen.
2) Press
to go other menu features.
3) Press the corresponding number to the menu item that you want to
select. Then the sub-menu list will appear on the screen.
4) Press the appropriate key to select the sub-menu you want to access.
5) Select preferred settings, using the
This feature enables you to dial numbers in your phone book through
two keys (for entries 10 to 99.)
30
Aiji System Co.,Ltd.
2.12.2.3 Three-Touch Speed Dialing
2.12.2 Making a call from Your Phone Book
2.12.2.2 Two-Touch Speed Dialing
1) Press the first digit.
2) Press and hold the key of the second digit.
OR
1) Press the first and second digit, then press
Model : AP Series
. Press
to go one
step backward while accessing menu or selecting settings.
Aiji System Co.,Ltd.
31
CDMA2000 1X RTT WLL
Model : AP Series
3.2 List of Menu State
Main Menu Sub-Menu
Call
History
1.Recent
Calls
Main Menu Sub-Menu
Setting Value
1. Display the latest 30 calls incoming,
outgoing and missed calls.
- No. and caller's name or phone number are listed
2. Check talk time
- Select one among listed calls and press [OK]
2.Incoming 1. Latest 20 incoming calls are listed
Calls
- No., Caller's Name or Phone Number and
Call Time are listed
2. Check talk time
- Select one among listed calls and press [OK].
3.Outgoing 1. Latest 20 outgoing calls are listed
Calls
- No., Caller's Name or Phone Number and
Call Time are listed
2. Check talk time
- Select one among listed calls and press [OK].
4.Missed
Calls
1. Latest 20 missed calls are listed
- No., Caller's Name or Phone Number and
Call Time are listed
2. Check incoming time
- Select one among listed calls and press [OK].
5.Call Timer Last call / Incoming calls / Outgoing calls
/ Total calls
6.Call Memo During a call, used to save a phone number
the other party tells you during a call without
writing it down. The phone number is saved in
Call Memo up to 10.
32
Aiji System Co.,Ltd.
CDMA2000 1X RTT WLL
Call
History
Phone
book
7.Clear
History
Model : AP Series
Setting Value
1. Clear the call history in a sub-menu
- Recent Calls / Incoming Calls / Outgoing
Calls / Missed Calls
2. All History
- Clear all calls listed in Recent Calls,
Incoming Calls, Outgoing Calls / Missed
Calls and Missed Calls
1. By Name
- When the box appears, enter the name
and press [OK]
1.Find Entry
- You can just enter the first few letters of the
name, then press [OK]. Your phone shows
the closest matching name.
2. By Location
- Entry Number 001 ~ 200 in the phone
3. By Number
- When the box appears, enter the phone
number and press [OK]
- You can just enter the few digits of the full
number, then press [OK].
Your phone shows the closest matching
phone number.
4. By Group
- No Group / Family / Friend / Office / No
Group / No Group
- You can change Group name of 'No Group
1' and 'No Group 2'
2.New Entry Name (16chr) / Location (001~200) / Mobile
(16chr) / Home (16chr) / Office (16chr) /
Group(16chr) / Ring
Aiji System Co.,Ltd.
33
CDMA2000 1X RTT WLL
Model : AP Series
Main Menu Sub-Menu
Phone
book
3.Edit Group 1. No Group
2. Family
3. Friend
4. Office
5. Other
6. No Group
7. No Group
4.Memory
Status
5.Phone Info
Message
1.Inbox
2.Write
Message
34
Setting Value
Aiji System Co.,Ltd.
CDMA2000 1X RTT WLL
Main Menu Sub-Menu
Message
Phone 001/200
Card 01/200(*Max)
1. My Phone #
2. S/W Version
Setting Value
2.Write
Message
3. Call Back #
- Display own number
- Write a phone number you want to receive
a call to.
3.Outbox
20 messages are listed
4.Delete
Message
1. Inbox
2. Outbox
3. All
5.Message 1. Display Message
- Notify: Notify when the message is arrived.
Settings
- Direct View: Display message including
message information.
2. Auto Save
- Prompt: Save or not
- Auto Save: The latest 50 messages are
automatically saved.
- Do not Save: Delete message
3. Auto Delete
- On/Off
4. Font Size
- Font 8_16 / Font 8_8
5. Delivery Acknowledgement
- On / Off
1. Card 00/20
2. Phone 00/50
3. Voice Message 00 ~
* Message Listed 01~50 with Caller ID or
Phone No.
- Select by Up/Down Key or Numeric Key
- [OK]: View message. Date and time of
received message, caller's phone number or
name and message are displayed.
- [Clear]: Move to message list
- [Menu]: Delete / Delete All / Lock
1. Send to
- Write phone number.
- Send a message to 10 persons at the same
time.
2. Write Message
- Write a message up to 160 characters
Model : AP Series
Sound
1.RingTones 31 ring tones and melodies
2.Alerts
/Tones
1. No Service
- On / Off
Aiji System Co.,Ltd.
35
CDMA2000 1X RTT WLL
Model : AP Series
Main Menu Sub-Menu
Sound
2.Alerts
/Tones
3.Volume
Phone
Setting
Setting Value
2. Minute Minder
- Off / 1 Minute
3. Connect Tone
- Off / Tone 1 ~ Tone 4
4. Disconnect
- Off / Tone 1 ~ Tone 4
1. Earpiece Volume: 1 ~ 4 Level
2. Ring Volume: 1 ~ 4 Level
3. Keypad Volume: 0 ~ 4 Level
Yes / No
1.Hot Line You can make a phone call with picking up the
handset in a few second you set
2.Alarm
Clock
Alarm 1 ~ Alarm3: Time / On or Off / Repeat
(Once / Daily / Weekdays only / Weekens) /
Ring
CDMA2000 1X RTT WLL
Main Menu Sub-Menu
4.Reset
Phone
5.PIN
Model : AP Series
Setting Value
1. Reset Settings (Yes / No)
2. Reset All (Yes / No)
Please Insert RUIM Card
1.Data Rate 19200bps/115200bps/230400bps
Data
Service
2.Incoming Voice only / Modem only / FAX only
Mode
3.3 Call History
3.3.1 Recent Calls
This menu allows you to view the 30 most recent outgoing, incoming
and missed phone calls.
•Press
→ 1. Call History → 1. Recent Calls
•You may place a call by pressing
3.Language Support English and one more language
4.Font
Select
5.LCD
Contrast
Security
1.Lock
Phone
2.Change
Code
3.Restrict
36
Aiji System Co.,Ltd.
3.3.2 Incoming Calls
Font 1 / Font 2 / Font 3
Level 1 ~ Level 30
Lock / Unlock
4 digit
1. Incoming Call (Yes / No)
2. Outgoing Call (Yes / No)
3. Messages (Yes / No)
4. Phone Book (Yes / No)
This menu allows you to view the last 20 calls received if you are
subscribed to the Caller Line Identification service.
•Press
→ 1. Call History → 2 . Incoming Calls
•You may place a call by pressing
3.3.3 Outgoing Calls
This menu allows you to view the last 20 calls dialed.
•Press
→ 1. Call History → 3 . Outgoing Calls
•You may place a call by pressing
Aiji System Co.,Ltd.
37
CDMA2000 1X RTT WLL
Model : AP Series
3.3.4 Missed Calls
• You may place a call by pressing
Tip 1 : Once you exceed the (total) 30-numbers or 20-numbers storage
limit, the oldest call history record is overwritten.
Tip 2 : Speed dialing a number in the Call History List is available.
to place a call.
• Select the number you want to call. Press
Tip 3 : To see the details of the call, select the number you want to see.
→ Press
Stored Name Display
Phone number
The time of call connection
Call time used.
Tip 4 : To save the call from the list to a phone book, press
→
Select '1.Save' → Press OK.
(If you need further information please refer to 2.12.1.1 Saving
Numbers in Your Personal Phone Book on page 29 )
Tip 5 : To delete the call from the list, select the call you want to delete.
→ Press
→ Press
→ Select ▣Yes
3.3.5 Call Timer
This menu allows you to view call time you use.
3.3.6 Call Memo
Used to save a phone number the other party tells you during a call,
without writing it down. The phone number saved in [Menu] → 1. Call
History → 6 Call Memo
38
Aiji System Co.,Ltd.
Model : AP Series
3.3.7 Clear History
This menu allows you to view the last 20 incoming calls that you failed
to answer if you are subscribed to the Caller Line Identification service.
• Press
→ 1. Call History → 4. Missed Calls
*No Name
*01491335593
*05:23P Feb 01
*00:01:11
CDMA2000 1X RTT WLL
This menu enables you to erase all lists or part of Call History
/Recent Calls / Incoming Calls / Outgoing Calls / Missed Calls
/ All History
3.4 Phone Book
You can store frequently used phone numbers and the corresponding
names in the memory of your phone and R-UIM. Although, they are
physically separate, used as if they were a single entity, called Phone
Book. Phone Book makes it easy for you to make a call without having
to remember or entering the phone number.
You can store up to 800numbers. (200 persons x 4 numbers)
3.4.1 Find Entry
This option allows you to search phone number you have stored in the
Phone Book by name, location (entry), number and group.
•Press
→ 2. Phone Book → 1 Find Entry
Note You can access this menu by pressing the
standby mode.
key in
3.4.2 New Entry
This menu allows you to store a number with a name in your Phone
Book. You can save all the person's numbers, such as office number,
mobile number and home number, into one entry. In the phone's
memory, you can save 200 entries and each entry can contain up to 4
numbers.
3.4.2.1 Creating a New Entry in the Phone's Memory
•Press
→ 2. Phone Book → 2 New Entry
Aiji System Co.,Ltd.
39
CDMA2000 1X RTT WLL
Model : AP Series
CDMA2000 1X RTT WLL
1) Enter Name (16 characters) → Press
→ Enter mobile phone
number (16chr) → Press
→ Enter home phone number → Press
→ Enter office phone number → Press
→ Enter other phone
number → Press
2) You may select group and the desired ID ring type using
and
key.
and then select the primary number
among the numbers you enter
To store a phone number at the end of your call:
•Press
→ 1. Call History → 1 Recent Calls → Save / Delete
3.4.3 Edit Group
This menu allows you to edit the settings (Phone numbers, ring type
and group) for the caller group.
•Press
→ 2. Phone Book → 3 Edit Group
1) Select the group you want to edit → Press
→ Display name of
group → If correct, press
. If not, press
to go back group
Select [1. Edit / 2. Delete / 3. Cancel] with
→ Press
key.
3.4.4 Memory Status
This option allows you to view your own phone number and software
version of your phone.
•Press
→ 2. Phone Book → 5 Phone Info
<< Phone Info >>
1 My Phone #
2 S/W Version
3.4.2.2 Storing Phone Numbers at Call History
selection status.
2) Select the entry you want to edit and press
The number of memory in the phone
The number of memory in RUIM card
3.4.5 Phone Information
Note 1 Group : No Group/ Family/ Friend/ Office/ Other/ No Group
Note 2 Ring type : 31 ring tones and melodies
3) To save new entry, press
Memory Statu
Pho 004/200
Card 000/200
Model : AP Series
→
3.5 Message
Text message and voice message become available as soon as the
power is on. You can also send text and voice messages.
When the phone receives a new message, an alert sounds and a text
notification displays along with the name and the phone number of the
caller, if available. The New Message icon (
) remains on the screen
until the new messages have been read or the new voice messages have
been listened.
You can access this menu by pressing the
key in standby mode. In
addition, you can make a call to the call back number by pressing the
key during message check.
The phone can store up to 50 text messages at Inbox with 160
characters per message.
3.5.1 Inbox
This menu shows you how many Phone Book entries are empty.
•Press
40
→ 2. Phone Book → 4 Memory Status.
Aiji System Co.,Ltd.
Your phone can store up to 50 messages in the Inbox. If the memory is
Aiji System Co.,Ltd.
41
CDMA2000 1X RTT WLL
Model : AP Series
CDMA2000 1X RTT WLL
Model : AP Series
3.5.2.1 How to write a Text
full, a warning message displays and the phone deletes the old
messages to receive new ones.
Note 1 If your phone support R-UIM, you can store more messages into
your phone. The number of messages is depended on the
capability of R-UIM card.
Note 2 Store capacity of voice message depends on your carrier's service
capability. Please check how many voice messages can be stored
before using.
•Press
< Inbox >
1 Card
00/00
2 Phone 01/03
3 Voice Msg
→ 3. Message → 1 Inbox or Press
→ 1 Inbox
Ex) 01/03: '01' means the number of new messages.
'03' means the number of total messages stored.
3.5.2 Write Message
You can create short text messages and send it to other (mobile)
phones.
1) Enter a destination number by using the numeric keys up to 10
multiple destinations.
Press
key allows you to search your Phone Book for a number.
2) When you are finished entering the destinations, press the
key.
3) Write the message.
4) When you have finished, press
5) Call back number is displayed. You can edit call back number using
key and numeric keys.
42
Aiji System Co.,Ltd.
1) Press
2) Press
key to change the input method, abc / 123 / Symbol
to change input method, ab / AB.
3.5.3 Outbox
This message box is used to store the messages that you have already
sent or you failed to send. Up to 20 sent messages can be stored in the
Outbox. Users may view lists and contents of sent messages or
failed messages in this menu.
•Press
•If you want it to view the details of stored message, select one of
messages listed and press
At many times when you using your phone, you will need to enter text;
such as when storing a name in Phone Book, sending Text Message.
You can enter alphanumeric characters into your phone using your
phone's keys.
→ 3. Message → 3 Outbox or Press
→ 3 Outbox
•If you want it to view the details of stored message, select one of
messages listed and press
3.5.4 Delete Messages
Using this menu, you can delete all of the messages in each message
box; 1 Inbox and 2 Outbox. You can also delete all of the messages at
one time by selecting 3 All. Locked messages are not erased.
•Press
→ 3. Message → 4 Delete Msg or Press
→4
Delete Msg
3.5.5 Message Settings
Using this menu, you can set up various options for using the messaging
features.
Aiji System Co.,Ltd.
43
CDMA2000 1X RTT WLL
Model : AP Series
•Press
→ 3. Message → 5 Msg Settings or Press
Msg Settings
CDMA2000 1X RTT WLL
→5
3.5.5.1 Display Message
This menu allows you to select the display type for a new message.
Notify: Notify when the message is arrived.
Direct View: Display received message including message
information.
3.5.5.2 Auto Save
This menu allows you to select save method for transmitted messages
in the Outbox.
Prompt: The phone asks whether or not you want to save the
message.
Auto Save: The phone automatically saves the message.
Do not Save: The phone does not save the message.
3.5.5.3 Auto Delete
With this feature on, old messages are automatically deleted when you
exceed storage limit.
3.5.5.4 Font Size
This option allows you to select font size for your convenience when you
read and write message.
Font 8_16: 4-line display
Font 8_8: 8-line display
3.5.5.5 Delivery Acknowledgement
44
Aiji System Co.,Ltd.
Model : AP Series
This option allows you to be certain the message transmission has gone
through.
3.5.5.6 Store Message
This option is used for phone using R-UIM.
R-UIM phone : Card Only / Phone Only /
No R-UIM phone : "Insert uim card please"
Card->Phone
3.6 Sound
You can use the sounds menu to customize various sound settings,
such as the:
•Ringer type, volume and tone.
•Alert and tones
•Volume for earpiece, ring and keypad.
3.6.1 Ring Tones
This menu allows you to set unique ring and melody tones. When you
make a new entry in a Phone Book menu, you can select one of these
ring tones.
•Press
→ 4. Sound →1 Ring Tones or Press
→ 1 Ring
Tones
• You may select 31 ring tones.
3.6.2 Alerts/Tones
Your phone gives audible alerts (beeps) at specified times to inform you
that certain things have happened. Any of the four Alert options could
be turned on or off.
•Press
→ 4. Sound → 2 Alerts/Tones or Press
→2
Alerts/Tones
Aiji System Co.,Ltd.
45
CDMA2000 1X RTT WLL
Model : AP Series
CDMA2000 1X RTT WLL
3.6.2.1 No Service
Model : AP Series
3.7 Phone Setting
When this option is set to on, the phone sounds an alert when you are
not in or leave a service area.
•Off / On
Many different features of your phone can be customized to suit your
preferences.
3.7.1 Hot Line
3.6.2.2 Minute Minder
•Press
When this option is set to on, the phone sounds an alert before the end
of every minute during a call.
→ 5. Phone Setting → 1 Hot Line → Yes / No
•You can set number and delay time.
Examples) "911", "100", or your home telephone number
•Off / 1 Minute
3.7.2 Alarm Clock
3.6.2.3 Connect Tone
This option allows you to set an alarm to ring at a specific time.
When this option is set to on, the phone sounds a connect tone when
your call is connected to the system.
•Off / Tone 1 ~ Tone 4
•Press
→ 5. Phone Setting → 2 Alarm Clock
To set an alarm:
1) Select an alarm, Alarm 1 through Alarm 3, and press the
2) Enter the time for the alarm to ring by using the numeric keys
3.6.2.4 Disconnect
and press
When this option is set to on, the phone sounds a disconnect tone when
a call is disconnected.
•Off / Tone 1 ~ Tone 4
3) Select On by pressing the
or
4) Select an alarm type by pressing the
key and press
or
key.
key and press
•Alarm type: Once / Daily / Weekdays only / Weekends
5) Select an alarm melody by pressing
This menu allows you to adjust the ring volume.
→ 4. Sound → 3 Volume or Press
•Earpiece Volume: Level 1 ~ Level 4
•Ring Volume: Level 1 ~ Level 4
•Keypad Volume: Level 0 ~ Level 4
Aiji System Co.,Ltd.
. You may select 5 types
alarm bells.
→ 3 Volume
3.7.3 Language
This phone support English and one another language.
•Press
46
key.
key.
3.6.3 Volume
•Press
key.
→ 5. Phone Setting → 3 Language
Aiji System Co.,Ltd.
47
CDMA2000 1X RTT WLL
Model : AP Series
CDMA2000 1X RTT WLL
--3.8.2 Change Code
3.7.4 Font Select
This menu allows you to select one among three font options (English
and 4-line display only).
•Press
→ 5. Phone Setting → 4 Font Select
•Font 1 / Font 2 / Font 3
This menu allows you to adjust the brightness of the LCD screen to see
them better in different lighting conditions.
To adjust the contrast:
1) Press
→5. Phone Setting → 5 LCD Contrast → Press the
or
key.
3.8 Security
3.8.1 Lock Phone
With this feature on, keeps your phone from unauthorized use. Once
the phone is locked, it is in restricted mode, until the lock code is
entered. This will allow you to receive phone calls and still make
emergency calls.
→ 6. Security → 1 Lock Phone
•Lock / Unlock
48
3.8.3 Restrict
•Incoming Call / Outgoing Call / Messages / Phone Book
•Press
→ 6. Security → 3 Restrict
3.8.4 Reset Phone
This feature has two options.
•Press
→ 6. Security → 4 Reset Phone
3.8.4.1 Reset Settings.
Your phone provides you with many security options, including a userprogrammable lock code and call restriction features.
To access the Security menu, you must enter the lock code. The lock
code is preset to "0000" at the factory.
•Press
This menu allows you to enter a new four-digit lock code number.
•Press
→ 6. Security → 2 Change Code
This menu allows you to restrict the following items.
3.7.5 LCD Contrast
key.
2) Adjust the contrast value by pressing
Model : AP Series
Aiji System Co.,Ltd.
This option allows you to reset preference settings.
3.8.4.2 Reset All
This option allows you to reset all settings and savings.
3.8.5 PIN (RUIM support model only)
•PIN Check
When this feature is enabled, you must enter the PIN assigned to your
R-UIM each time you switch the phone on. Consequently, any person
who does not have your PIN cannot use your phone without your
approval. But emergency calls are available by pressing the key
without the PIN code.
Aiji System Co.,Ltd.
49
CDMA2000 1X RTT WLL
Model : AP Series
Note : After enabling or disabling the PIN Check feature, you must
enter your PIN.
CDMA2000 1X RTT WLL
Model : AP Series
Appendix A. Specification
•Change PIN
AP-100/110
Frequency Range
This feature allows you to change the PIN of the R-UIM to a new one,
provided that the PIN Check feature is enabled. You must enter the
current PIN before you can specify a new one.
AP-200/210
Tx : 824~849MHz
Rx : 869~894MHz
Tx : 1850~1910MHz
Rx : 1930~1990MHz
External Dimension
168(W)X189(L)X56(H)mm
Weight
750g (With Back-up battery)
Adaptor
Input : AC 100~240V, 50/60Hz
Output : DC 5/12V, 1A
* You must check your output voltage!
Battery
Normal : 3.6V , 1,500 mAh
Standby Time
72hours (-83dBm/slot#2)
Talk Time
180Min (10dBm, Half Rate)
• R-UIM Lock
When this feature is enabled, your phone only works with the current
R-UIM. To use a different card, you need to enter the R-UIM lock code.
Once you have entered the lock code, you are asked to confirm it by
entering it again.
To unlock the R-UIM, you must enter the R-UIM lock code.
3.9 Data Service
Your phone provides Data and PC Fax service. It is capable of
transmitting and receiving Data through a wireless path by being
connected to a laptop or desktop PC.
The following services are available.
• Packet Data Service
- FTP, Internet, Intranet, LAN, E-Mail etc.
• PC Fax Service
- Wireless Fax transmit/receive using the Winfax or Hotfax.
*Specifications are subject to change without Notice.
Note : In case of using USB to serial cable to connet the data
service,you may not connect with Internet service without DC
adaptor.
50
Aiji System Co.,Ltd.
Aiji System Co.,Ltd.
51
Safety Information
1 . SAFETY INFORMATION FOR FIXED WIRELESS TERMINALS
.POTE NTIALLY EXPLOSIVE ATMOSPHERES
Turn your phone OFF when in any area with a potentially explosive atmosphere
and obey all signs and instructions. Sparks in such areas could cauls e an
explosion or fire resulting in bodily injury or even death.
INTERFERENCE TO MEDICAL DIVICES
Certain electronic equipment may be shielded against RF signal from you wireless
phone. (pacemakers, Hearing Aids, and so on) Turn your phone OFF in health care
facilities when any regulations posted in these areas instruct you to do so.
RF signals may affect improperly installed or inadequately shielded electronic
system in motor vehicles.
.EXPOSURE TO RF ENERGY
Use only the supplied or an approved replacement antenna.
Do not touch the antenna unnecessarily when the phone is in use.
Do not move the antenna close to, or touching any exposed part of the body when
making a call.
SAR INFORMATION
THIS MODEL PHONE MEETS THE GOVERNMENT’S
REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.
Your wireless modem is a radio transmitter and receiver. It is designed and manufactured not to
exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal
Communications Commission of the U.S. Government. These limits are part of comprehensive
guidelines and establish permitted levels of RF energy for the general population. The
guidelines are based on standards that were developed by independent scientific organizations
through periodic and thorough evaluation of scientific studies. The standards include a
substantial safety margin designed to assure the safety of all persons, regardless of age and
health. The exposure standard for wireless mobile phones employs a unit of measurement
known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. *
Tests for SAR are conducted with the phone transmitting at its highest certified power level in all
tested frequency bands. Although the SAR is determined at the highest certified power level,
the actual SAR level of the phone while operating can be well below the maximum value. This is
because the phone is designed to operate at multiple power levels so as to use only the power
required to reach the network. In general, the closer you are to a wireless base station antenna,
the lower the power output. Before a phone model is available for sale to the public, it must be
tested and certified to the FCC that it does not exceed the limit established by the government
adopted requirement for safe exposure. The tests are performed in positions and locations (e.g.,
at the ear and worn on the body) as required by the FCC for each model. The highest SAR
value for this model when tested for use at the when worn on the body, as described in this user
guide, is 1.15 W/Kg . (Body-worn measurements differ among models, depending upon
available accessories and FCC requirements). While there may be differences between the
SAR levels of various and at various positions, they all meet the government requirement for
safe exposure. The FCC has granted an Equipment Authorization for this model with all
reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR
information on this model is on file with the FCC and can be found under the Display Grant
section of http://www.fcc.gov/ oet/fccid after searching on FCC ID: S3FAP-100 .
Additional information on Specific Absorption Rates (SAR) can be found on the Cellular
Telecommunications Industry Association (CTIA) web-site at http://www.wow-com.com.
* In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6
watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a sub-stantial
margin of safety to give additional protection for the public and to account for any variations in
measurements.
SAFETY INFORMATION FOR RF EXPOSURE
Body worn operation
This device was tested for typical body-worn operations with the back of the phone
kept 25 mm. from the body. To maintain compliance with FCC RF exposure
requirements, use only belt-clips, holsters or similar accessories that maintain a 25 mm.
separation distance between the user’s body and the back of the phone, including the
antenna. The use of belt-clips, holsters and similar accessories should not contain
metallic components in its assembly. The use of accessories that do not satisfy these
requirements may not comply with FCC RF exposure requirements, and should be
avoided.
FCC Compliance Information
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received.
Including interference that may cause undesired operation.
U.S.A.
U.S.FEDERAL COMMUNICATIONS COMMISSION
RADIO FREQUENCY INTERFERENCE STATEMENT
INFORMATION TO THE USER
NOTE : This equipment has been tested and found to comply with the limits for a
digital device pursuant to Part 15 of the FCC Rules.
Class B
These limits are designed to provide reasonable protection against harmful Interference in
a residential installation This equipment generates, uses, and can radiate radio frequency
energy and, if Not installed and used in accordance with the instructions, may cause
harmful Interference to radio communications. However, there is no guarantee that
interference will not occur in a particular Installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet of a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for assistance.
Changes or modification not expressly approved by the party responsible for Compliance
could void the user’s authority to operate the equipment. Connecting of peripherals requires
the use of grounded shielded signal cables.
“Licensed by QUALCOMM Incorporated under one or more of following Patents :
4,901,307
5,506,865
5,267,261
5,600,754
5,490,165
5,109,390
5,544,196
5,414,796
5,056,109
5,511,073
5,267,262
5,657,420
5,504,779
5,101,501
5,228,054
5,535,239
5,568,483
5,337,338
5,416,797 ”
CDMA2000 1X RTT Fixed Wireless Telephone
Quick Start Guide & User’s Manual
Made in KOREA
AIJI SYSTEM CO., LTD.
5,778,338
5,710,784
5,659,569
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Modify Date : 2005:04:01 14:50:42+09:00 Create Date : 0000:01:01 00:00:00Z Creation Date--Text : .j˘˘@ˇ|G` %.˘Qpˇ|FP˘+Pˇ|.jˇ|F8ˇ|F` Page Count : 31 Mod Date : 2005:04:01 14:50:42+09:00 Creation Date : 0-01-01T00:00:00Z Author : Producer : Metadata Date : 2005:04:01 14:50:42+09:00 Title : Creator :EXIF Metadata provided by EXIF.tools