AIRTAME APS AT-DG1 HDMI Dongle, model AT-DG1 User Manual

AIRTAME APS HDMI Dongle, model AT-DG1

User Manual

AIRTAME How to use, Safety, Regulatory and Warranty informationFor more information visitairtame.com/support
WHAT’S IN THE BOX?AIRTAME: The AIRTAME Dongle plugs into the HDMI port on your TVMicro USB Cable: To provide power for AIRTAME you need to connect the Micro USB cable between AIRTAME and the AC AdapterHDMI Extension Cord: The HDMI extender can be used if AIRTAME not fit behind the TV because of limited space.Power supply: The provided power supply should be used to power AIRTAME
AC power adapterMicro USB cableHDMI extension cableEU power adapterUK power adapter
SET UP PROCESSMore help can be found at: setup.airtame.comStep 1Plug AIRTAME into an HDMI port in the back of your TV. Take the included USB cable and plug the smaller end into AIRTAME and the other end into the included power adapter. Power it up. Step 2On your TV, select the HDMI input source you just plugged AIRTAME in to. You should see an AIRTAME setup screen now.Step 3Go to setup.airtame.com from your browser on your phone, tablet or computer - and follow further instructions.
SAFETY PRECAUTIONSAIRTAME has been designed with high attention to the safety for the user. However if used improperly, AIRTAME have the potential for causing fire, electrical shock or personal injury. To avoid any accident please pay attention to these guidelines:• Use only the power supply and Micro USB cable provided by AIRTAME. Using other cables and power supplies can potentially damage or influence the functionalities during use.• AIRTAME generates heat during use that increases the temperature of the outside of AIRTAME. It should be powered o and cooled before removing from your monitor.• Stop use of AIRTAME imidiately if the device funtions in an abnormal manner, produces unusual sounds or smell and/or becomes to hot to touch.• Do not expose AIRTAME including the Micro USB cable, HDMI extender or power supply
to water or extreme conditions (moisture, heat, cold, dust) as it potentially could result in malfunction when exposed to such elements.• Do not attempt to disassemble or repair AIRTAME yourself. Doing so voids the limited warranty and could harm you, your television, and/or the device.• Be careful when using the Power supply and only use in combination with AIRTAME in dry locations to avoid the risk of electric shock.LICENSE AGREEMENTSoftware license terms related to AIRTAME can be found at airtame.com/support/license When using AIRTAME you accept the agreement to those terms.WARRANTY INFORMATIONWarranty information applicable for your country can be found at airtame.com/support/warranty
LEGAL NOTICESModel AT-DG1FCC ID: 2ADEFAT-DG1IC: 12460A-ATDG1Federal Communication Commissions Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one of the following measures:
• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. IEEE 802.11b or 802.11g operation of this product in the U.S.A. is firmware-limited to channels 1 through 11. Wireless Radio Use: This device is restricted to indoor use when operating in the 5.15 to 5.25 GHz frequency band.
IMPORTANT NOTE:FCC Radiation Exposure Statement:To satisfy FCC and IC exposure requirements, a separation distance of at least 20 cm should be maintained between the antenna of this device and persons during device operation. Operations at closer than this distance are not recommended.The antenna used for this transmitter must not be co-located in conjunction with any other antenna or transmitter.Note to US model owner:To comply with US FCC regulation, the country selection function has been completely removed from all US models.The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user.
INDUSTRY CANADA (IC) NOTICESEnglish“Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada.To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.”“This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.”
French“Conformément à la réglementation d’Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d’un type et d’un gain maximal (ou inférieur) approuvé pour l’émetteur par Industrie Canada.Dans le but de réduire les risques de brouillage radioélectrique à l’intention des autres utilisateurs, il faut choisir le type d’antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l’intensité nécessaire à l’établissement d’une communication satisfaisante.”“Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.”
EUROPEAN UNIONAIRTAME ApS declares that this equipment is in compliance with the essential requirements and other provisions of Directive 1999/5/EC. The full Decleration of Conformity can be found at airtame.com/support/cemarkingWaste management of AIRTAME follows the WEEE Directive 2012/19/EU and the RoHS recasst Directive 2011/65/EU. More information can be found at airtame.com/support/wasteAIRTAME was designed by:AIRTAME ApS, Vestergade 20C 2nd, Copenhagen K 1456, Denmark.airtame.com

Navigation menu