AISIN AW NA08A02 Car Navigation System with BT User Manual
AISIN AW CO., LTD. Car Navigation System with BT
AISIN AW >
Contents
- 1. User Manual Part 1
- 2. User Manual Part 2
- 3. User Manual Part 3
User Manual Part 2
V573_E ROUTE GUIDANCE — Route overview z To set a POI as a destination You can select one of the Points of Interest icons on the map screen as a destination and use it for route guidance. 1. Touch “Map View”. 2. Touch “Route Overview”. 1. Directly touch the Point of Interest icon that you want to set as a destination. The map will shift so that the icon is centered on the screen and overlaps . At this time, the with the cursor distance from the current position is displayed on the screen. The distance shown is measured as a straight line from the current vehicle position to the POI. 2. When the desired Point of Interest overlaps with the cursor, touch “Enter ”. The screen changes and displays the map location of the selected destination and route preference. (See “Starting route guidance” on page 61.) The entire route from the current position to the destination is displayed. “Guide”: To start guidance. “Route”: To change the route. (See pages 72 and 75.) “Turn List”: The following screen displays the list of the roads up to the destination. 81 V573_E ROUTE GUIDANCE — Route preview You can scroll through the list of roads by touching or . However, not all road names in the route may appear on the list. If a road changes its name without requiring a turn (such as on a street that runs through two or more cities), the name change will not appear on the list. The street names will be displayed in order from the starting point, along with the distance to the next turn. These marks indicate the direction in which you should turn at an intersection. Touch “Map” of the “Turn List” screen. The point which you choose is displayed on the map screen. 82 1. Touch “Map View”. 2. Touch “Route Preview”. V573_E ROUTE GUIDANCE — Route trace It is possible to store the traveled route up to 124 miles (200 km) and retrace the route on the display. INFORMATION This feature is available on the map with more detailed map scale than 30 miles (50 km). To indicate the next destination. To preview the route to the next destination. To preview the route to the next destination in fast-forward mode. To pause preview. To review the route to the previous destination or starting point. To review the route to the previous destination or starting point in fast-forward mode. To indicate the previous destination or starting point. Touch “Map View”. 83 V573_E ROUTE GUIDANCE “Record”: To start recording the route trace. “Stop”: To stop recording the route trace. If you touch “Stop”, the following screen will be displayed. Touching “Yes” stops recording and the route trace remains displayed on the screen. Touching “No” stops recording and the route trace is erased. 84 V573_E ADVANCED FUNCTIONS SECTION ADVANCED FUNCTIONS Descriptions of functions for more effective use z z z z z Suspending and resuming guidance ·················································· 86 Volume································································································ 87 User selection ····················································································· 88 ® XM NavTraffic ·················································································· XX My Places ·························································································· 90 Registering memory points ······························································ 91 Editing memory points ····································································· 92 Deleting memory points ··································································· 96 Registering home············································································· 97 Deleting home·················································································· 98 Registering area to avoid ································································· 98 Editing area to avoid ········································································ 99 Deleting area to avoid ···································································· 102 Deleting previous points································································· 102 z Setup ································································································ 103 85 V573_E ADVANCED FUNCTIONS Suspending and resuming guidance z To suspend guidance z To resume guidance 1. Push the “NAVI” button. 1. Push the “NAVI” button. 2. Touch “Suspend Guidance”. 2. Touch “Resume Guidance”. INFORMATION Without route guidance, the “Suspend Guidance” cannot be used. The screen will change to the current position map with route guidance. The screen will return to the current position map without route guidance. 86 V573_E ADVANCED FUNCTIONS Volume The voice guidance volume can be adjusted or switched off. 1. Push the “NAVI” button. INFORMATION During route guidance, the voice guidance continues even if the navigation screen is changed to other screens. “Adaptive Volume Control”: By turning “Adaptive Volume Control” on, the volume is turned up automatically when the vehicle speed exceeds 50 mph (80 km/h). 2. Touch “Volume”. To turn the “Adaptive Volume Control” system on, touch the button. The indicator will be highlighted. To adjust the volume, select the desired level by touching the appropriate number. If voice guidance is not needed, touch “OFF” to disable the feature. When selected the number or “OFF” will be highlighted. 3. Touch “OK” to confirm your selection. 87 V573_E ADVANCED FUNCTIONS User selection The system can memorize the following settings for up to three users. z To register z Map direction z Map scale z Map configuration z Guidance mode z Setup z Volume z Language z Route trace 1. z Travel time/arrival time The confirmation screen will be displayed. z Right screen of dual map Touch “Memorize”. z Route preference z Maintenance notification ® z XM NavTraffic 1. Push the “NAVI” button. 2. To register, touch “Yes”. To return to the previous screen, touch “No” or 2. Touch “Select User”. When a touch screen button that is already registered is touched, the following screen appears. To replace, touch “Yes”. To cancel the replacement, touch “No” or 88 V573_E ADVANCED FUNCTIONS z To change user z To delete user Touch “User number”. 1. Touch “Delete”. The confirmation screen will be displayed. The above message appears, then the map screen will be displayed. 2. To delete, touch “Yes”. To return to the previous screen, touch “No” or 89 V573_E ADVANCED FUNCTIONS XM® NavTraffic ® The XM NavTraffic service that allows the navigation system to display traffic information on the map is available if your satellite radio tuner can receive traffic information. ® (a) Show XM NavTraffic information 1. Push the “NAVI” button to display the “Menu” screen and touch the “XM Traffic”. ® To receive the XM NavTraffic service, a ® subscription to the XM Satellite Radio with NavTraffic is necessary. ® The XM NavTraffic is available in the contiguous 48 U.S. states and some Canadian cities. For details about the ® XM NavTraffic service coverage area, refer to www.xmradio.com (U.S.A.) or www.xmradio.ca (CANADA). ® zHow to activate the XM NavTraffic service 2. Touch “Show Traffic Events”. ® To receive the XM NavTraffic service, it is necessary to activate the service. To activate the service, an extra fee is required in addition to ® subscription fees for the XM Satellite Radio. For details about service ® and activation, call XM Listener Care Center at 1-800-967-2346 (U.S.A.) or 1-877-438-9677 (CANADA). Customers should have their radio ID ready; the radio ID can be found by selecting “channel 000” on the radio. For details, see “z Displaying the radio ID” on page 155. ® XM Satellite Radio has the responsibility for all fees and service, they are subject to change. 90 3. Select the desired item by touching the touch screen button (while the vehicle is not moving). To select all the icons or reset, touch “All ON” or “All OFF” and then touch “OK”. V573_E ADVANCED FUNCTIONS ® XM NavTraffic icon When any traffic information has been ® received, the XM NavTraffic icon will appear on the map screen. ® Ź On map screen XM NavTraffic flow information A color coded bar appears on the map to ® represent traffic flow when XM NavTraffic information is available. The color of the bar changes according to traffic conditions. “Red”: Heavy congestion “Yellow”: Moderate traffic “Green”: Freely flowing traffic “Orange”: Controlled traffic “Black”: Closed road ® Ź On Freeway information screen XM NavTraffic indicator ® When any XM NavTraffic information ® has been received, the XM NavTraffic indicator will appear on the screen. The color of the indicator changes depending on the traffic information received. “White”: Traffic information has been received. “Blue”: Other traffic information on the guidance route has been received (touch switch*). “Yellow”: Traffic restriction information on the guidance route has been received (touch switch*). “Red”: Congestion information on the guidance route has been received (touch switch*). ® *: Touching the XM NavTraffic indicator will start voice guidance. 91 V573_E ADVANCED FUNCTIONS (b) Auto avoid traffic ® Using XM NavTraffic information, the system automatically calculates a new route. (c) Traffic voice guidance When there are some traffic events on the guidance route, the system will notify you via voice. 1. Push the “NAVI” button to display the “Menu” screen and touch “XM Traffic”. When the system calculates a new route, a confirmation to accept the new route is displayed on the screen. If you touch “Yes”, the system changes the guidance route to the new route. Touch “No” to keep the current route. 1. Push the “NAVI” button to display the “Menu” screen and touch “XM Traffic”. 2. Touch “Auto Avoid Traffic”. INFORMATION When the “Traffic Information” indicator is dimmed, “Auto Avoid Traffic” and “Voice Guidance” will not operate. 92 2. Touch “Voice Guidance”. INFORMATION When the “Traffic Information” indicator is dimmed, “Auto Avoid Traffic” and “Voice Guidance” will not operate. V573_E ADVANCED FUNCTIONS ® (d) XM NavTraffic text information ® (e) Traffic on route When you touch the XM NavTraffic icon on the map, the “Traffic info.” bar appears on the top of the screen. 1. Push the “NAVI” button to display the “Menu” screen and touch “XM Traffic”. 1. Touch “Info.” on the bar to display the“Traffic information” screen. 2. Touch “Traffic On Route” to display the “Traffic On Route” screen. 2. Touch “Detail” to display detailed traffic event information. Guidance route traffic information is displayed on the screen. This “Detail” function is not available while driving. To show the map or detailed information, touch “Map” or “Detail”. This “Detail” function is not available while driving. 93 V573_E ADVANCED FUNCTIONS MAP DETAILED INFORMATION The map around the traffic event is displayed. The type of traffic event is displayed at the top of the screen. Detailed traffic event information is displayed. 94 This “Detail” function is not available while driving. V573_E ADVANCED FUNCTIONS (f) All traffic events 1. Push the “NAVI” button to display the “Menu” screen and touch “XM Traffic”. 5. Touch “Map” or “Detail”. (See “(e) Traffic on route” on page XX.) This “Detail” function is not available while driving. 2. Touch “All Traffic Events” to display the “All Traffic Events” screen. This “All Traffic Events” function is not available while driving. 3. Touch the desired road name from the list. ® 4. All XM NavTraffic information is displayed, regardless of the guidance route. 95 V573_E ADVANCED FUNCTIONS My Places — Points or areas on the map can be registered. The registered points can be used on the “Destination” screen. (See “ — Destination search by Home” on page 45 or “ — Destination search by Quick access” on page 45 and “ — Destination search by Memory” on page 56.) Registered areas are avoided at the time of route search. 1. Push the “NAVI” button. On this screen, the following operations can be performed. Registers memory points (See “ — Registering memory points” on page 91.) Edits memory points (See “ — Editing memory points” on page 92.) Deletes memory points (See “ — Deleting memory points” on page 96.) 2. Touch “My Places”. Registers or deletes home (See “ — Registering home” on page 97 or “ — Deleting home” on page 98.) Registers areas to avoid (See “ — Registering area to avoid” on page 98.) Edits areas to avoid (See “ — Editing area to avoid” on page 99.) Deletes areas to avoid (See “ — Deleting area to avoid” on page 102.) Deletes previous points (See “ — Deleting previous points” on page 102.) Number of remaining memory points Number of remaining areas to avoid 96 V573_E ADVANCED FUNCTIONS — Registering memory points 1. Push the “NAVI” button. 2. Touch “My Places” on the “Menu” screen. 5. Touch “OK”. To edit registered information, see “ — Editing memory points” on page 92. 3. Touch “Register”. INFORMATION Up to 106 memory points can be registered. 4. Enter the location in the same way as for a destination search. (See “Destination search” on page 42.) After memory point registration is completed, the “Memory Point” screen will be displayed. 97 V573_E ADVANCED FUNCTIONS — Editing memory points The icon, attribute, name, location and/or telephone number of a registered memory point can be edited. 1. Push the “NAVI” button. 2. Touch “My Places” on the “Menu” screen. 5. Touch the touch screen button to be edited. “Icon”: To select icons to be displayed on the map. (See page 93.) 3. Touch “Edit”. “Quick Access”: To set an attribute. Memory points with a set attribute can be used as a “Quick Access” or “Home” touch screen button. (See page 94.) “Name”: To edit memory point names. The names can be displayed on the map. (See page 95.) “Location”: To edit location information. (See page 95.) “Phone #”: To edit telephone numbers. (See page 96.) 6. 4. Touch the desired memory point button. 98 Touch “OK”. V573_E ADVANCED FUNCTIONS z To change “Icon” SOUND ICONS 1. Touch “Icon” on the “Memory Point” screen. When the vehicle approaches the memory point, the selected sound will be heard. 1. Touch “with Sound” “Change Icon” screen. 2. on the Touch the desired icon. Turn the page by touching “Page 1”, “Page 2” or “with Sound”. 2. Touch the desired sound icon. The next screen appears when “Bell (with Direction)” is touched. Touch either or to adjust the direction. Touch “Enter”. The bell sounds only when the vehicle approaches this point in the direction that has been set. 99 V573_E ADVANCED FUNCTIONS z To change “Quick Access” DELETING “Quick Access” It is possible to change attributes of the quick access points. Memory points with a set attribute can be used as a “Quick Access” or “Home” touch screen button. (See “ — Destination search by Home” on page 45 and “ — Destination search by Quick access” on page 45.) 1. Touch “Quick Access” on the “Memory Point” screen. 1. 2. Touch the desired attribute. It is possible to replace a registered attribute. 3. To replace the attribute, touch “Yes”. To return to the previous screen, touch “No” or INFORMATION One “Home” and five “Quick Access” can be set. 100 Touch “Del.”. 2. To delete an attribute, touch “Yes”. To return to the previous screen, touch “No” or V573_E ADVANCED FUNCTIONS z To change “Name” z To change “Location” 1. Touch “Name” on the “Memory Point” screen. 1. Touch “Location” on the “Memory Point” screen. 2. Enter the name using the alphanumeric keys. Up to 24 letters can be entered. 2. Touch the eight directional touch screen button to move the cursor to the desired point on the map. 3. 3. Touch “OK”. The previous screen will be displayed. DISPLAYING MEMORY POINT NAMES Touch “Enter”. The previous screen will be displayed. The name of a memory point that may be displayed on the map can be set. To show the name, touch “ON” on the “Memory Point” screen. To not show it, touch “OFF”. 101 V573_E ADVANCED FUNCTIONS — Deleting memory points z To change “Phone #” (telephone number) 1. Touch “Phone #” on the “Memory Point” screen. 1. Push the “NAVI” button. 2. Touch “My Places” on the “Menu” screen. 3. Touch “Delete”. 2. Enter the number using numeral keys. 3. Touch “OK”. The previous screen will be displayed. 4. Touch the touch screen button to be deleted. “Delete All”: To delete all memory points in the system. 5. To delete the memory point, touch “Yes”. To cancel the deletion, touch “No”. 102 V573_E ADVANCED FUNCTIONS — Registering home If home has been registered, that information can be recalled by using the “Home” touch screen button on the “Destination” screen. (See “ — Destination search by Home” on page 45.) 1. When registration of home is completed, the “Memory Point” screen will be displayed. Push the “NAVI” button. 2. Touch “My Places” on the “Menu” screen. 5. Touch “OK”. To edit registered information, see “ — Editing memory points” on page 92. 3. Touch “Register”. 4. Enter the location in the same way as for a destination search. (See “Destination search” on page 42.) 103 V573_E ADVANCED FUNCTIONS — Deleting home — Registering area to avoid 1. Areas you want to avoid because of traffic jams, construction work or other reasons can be registered as areas to avoid. Push the “NAVI” button. 2. Touch “My Places” on the “Menu” screen. 1. Push the “NAVI” button. 2. Touch “My Places” on the “Menu” screen. 3. Touch “Delete”. 4. To delete home, touch “Yes”. cancel the deletion, touch “No”. To 3. Touch “Register”. 4. Enter the location in the same way as for a destination search, or display the map of the area to be avoided. (See “Destination search” on page 42.) 104 V573_E ADVANCED FUNCTIONS — Editing area to avoid The name, location and/or area size of a registered area can be edited. 1. Push the “NAVI” button. 2. Touch “My Places” on the “Menu” screen. 5. Touch the eight directional touch screen button to move the cursor to the desired point on the map. 6. Touch “Enter”. 3. Touch “Edit”. 4. Touch the desired area button. 7. Touch either or to change the size of the area to be avoided. 8. Touch “OK”. INFORMATION zIf a destination is input in the area to avoid or the route calculation cannot be made without running through the area to avoid, a route passing through the area to be avoided may be shown. z Up to 10 locations can be registered as points/areas to avoid. If there are 10 locations already registered, the following message will be displayed: “Unable to register additional points. Please try again after deleting unnecessary points.”. 105 V573_E ADVANCED FUNCTIONS z To change “Name” 1. Touch “Name” on the “Edit Area to Avoid” screen. 5. Touch the touch screen button to be edited. “Name”: To edit the name of the area to avoid. The names can be displayed on the map. (See page 100.) “Location”: To edit area location. (See page 101.) “Area Size”: To edit area size. (See page 101.) “Active”: To turn on or off the area to avoid feature. To turn on the feature touch “ON” on the “Edit Area to Avoid” screen. To turn off the feature touch “OFF” on the “Edit Area to Avoid” screen. 6. 2. Enter the name using alphanumeric keys. Up to 24 letters can be entered. 3. Touch “OK”. The previous screen will be displayed. DISPLAYING NAMES OF AREAS TO BE AVOIDED The name of an area to be avoided that may be displayed on the map can be set. Touch “OK”. To show the name, touch “ON” on the “Edit Area to Avoid” screen. To not show it, touch “OFF”. 106 V573_E ADVANCED FUNCTIONS z To change “Location” z To change “Area Size” 1. Touch “Location” on the “Edit Area to Avoid” screen. 1. Touch “Area Size” on the “Edit Area to Avoid” screen. 2. Touch the eight directional touch screen button to move the cursor to the desired point on the map. 2. Touch either or to change the size of the area to be avoided. 3. 3. Touch “Enter”. The previous screen will be displayed. Touch “OK”. The previous screen will be displayed. 107 V573_E ADVANCED FUNCTIONS — Deleting area to avoid — Deleting previous points 1. The previous destination can be deleted. Push the “NAVI” button. 2. Touch “My Places” on the “Menu” screen. 3. 1. Push the “NAVI” button. 2. Touch “My Places” on the “Menu” screen. Touch “Delete”. 3. 4. Touch the touch screen button to be deleted. “Delete All”: To delete all registered areas to avoid in the system. 5. To delete the area, touch “Yes”. To cancel the deletion, touch “No”. Touch “Delete Previous Points”. 4. Touch the touch screen button to be deleted. “Delete All”: To delete all previous points in the system. 5. To delete the point, touch “Yes”. To cancel the deletion, touch “No”. 108 V573_E ADVANCED FUNCTIONS Setup Setting the items shown on the “Setup” screen can be done. z Distance unit 1. 1. Push the “NAVI” button. Distance unit can be changed. Push the “NAVI” button. 2. Touch “Setup” on the “Menu” screen. 2. Touch “Setup”. 3. Touch “km” or “miles” of “Distance” to choose the distance unit. The selected button is highlighted. 4. Touch “OK”. INFORMATION 3. Touch the items to be set. 4. Touch “OK” on the screen. This function is available only in English or Spanish. To switch language, see “Select language” on page 172. The previous screen will be displayed. INFORMATION To reset all setup items, touch “Default”. 109 V573_E ADVANCED FUNCTIONS z Estimated travel time The speed that is used for the calculation of the estimated travel time and the estimated arrival time can be set. 1. Push the “NAVI” button. 2. Touch “Setup” on the “Menu” screen. INFORMATION z The displayed time to the destination is the approximate driving time that is calculated based on the selected speeds and the actual position along the guidance route. z The time shown on the screen may vary greatly depending on progress along the route, which may be affected by road conditions such as traffic jams and, construction work. z It is possible to display up to 99 hours 59 minutes. 3. Touch “Set Speed” of the “Estimated Travel Time”. 4. Touch or to set the average vehicle speeds for “Residential”, “Main street”, and “Freeway”. To set the default speeds, touch “Default”. 5. After setting of the desired speeds is completed, touch “OK”. 110 V573_E ADVANCED FUNCTIONS z Input keyboard layout LAYOUT TYPE Keyboard layout can be changed. 1. Push the “NAVI” button. 2. Touch “Setup” on the “Menu” screen. Ź “ABC” type 3. Touch “ABC” or “QWE” of “Keyboard Layout” to choose the keyboard layout. Ź “QWE” type The selected button is highlighted. 4. Touch “OK”. 111 V573_E ADVANCED FUNCTIONS z Time zone Time zone can be changed. 1. Push the “NAVI” button. 2. Touch “Setup” on the “Menu” screen. z Screen layout Function) function Each touch screen button and current street name on the map screen can be displayed or hidden. 1. Push the “NAVI” button. 2. Touch “Setup” on the “Menu” screen. 3. Touch “Change” of “Time Zone”. The “Adjust Time Zone” screen will be displayed on the display. 4. 112 Func- Touch the desired time zone. The selected button is highlighted. “Daylight Saving Time”: Daylight saving time can be set or cancelled. To set daylight saving time, touch “ON”, and to cancel it, touch “OFF”. 5. 3. Touch “Change” of “ tion”. Touch “OK”. 4. Touch the touch screen button to be turned off. The button becomes dimmed. To set the default, touch “Default”. 5. Touch “OK”. V573_E ADVANCED FUNCTIONS z POI category change (Display POI Icons) Select from among the 6 icons displayed on the “Display POI Icons” top screen, so that setting of the icons to be displayed on the map screen can be done easily. 1. Push the “NAVI” button. 2. Touch “Setup” on the “Menu” screen. to display page 2 of the Then touch “Setup” screen. 3. Touch “Change” of “Display POI Icons”. 4. Touch the category button to be changed. 5. Touch the category button to be displayed on the “Display POI Icons” top screen. 6. Touch “OK”. 113 V573_E ADVANCED FUNCTIONS z 3D landmark z Notifying traffic restriction When the “3D landmark” feature is turned on, the system will display the 3D landmark on the map. When the “Traffic Restrict. Notification” feature is turned on, the system notifies you of traffic or seasonal restrictions. To turn the “3D landmark” mode on: To turn the “Traffic Restrict. Notification” on: 1. Push the “NAVI” button. 2. Touch “Setup” on the “Menu” screen. to display page 2 of the Then touch “Setup” screen. 3. to display page 2 of the Then touch “Setup” screen. Touch “OK”. 3. Touch “ON” of “Traffic Restrict. Notification”. The selected button is highlighted. 4. 114 Push the “NAVI” button. 2. Touch “Setup” on the “Menu” screen. Touch “ON” of “3D landmark”. The selected button is highlighted. 4. 1. Touch “OK”. V573_E ADVANCED FUNCTIONS z Voice guidance in all modes z Auto voice guidance When the “Voice Guidance in All Modes” feature is turned on, the voice guidance in all modes can be heard. When the “Auto Voice Guidance” feature is turned on, the voice guidance can be heard automatically. When the “Voice Guidance in All Modes” feature is turned off, the voice guidance cannot be heard when using the audio/video system. When the “Auto Voice Guidance” feature is turned off, the voice guidance can be heard only if the “MAP” button is pushed. To turn the “Voice Guidance in All Modes” on: To turn the “Auto Voice Guidance” mode on: 1. 1. Push the “NAVI” button. Push the “NAVI” button. 2. Touch “Setup” on the “Menu” screen. 2. Touch “Setup” on the “Menu” screen. to display page 2 of the Then touch “Setup” screen. twice to display page 3 Then touch of the “Setup” screen. 3. Touch “ON” of “Voice Guidance in All Modes”. 3. Touch “ON” of “Auto Voice Guidance”. The selected button is highlighted. The selected button is highlighted. 4. 4. Touch “OK”. Touch “OK”. 115 V573_E ADVANCED FUNCTIONS z Pop-up message When the “Pop-up Message” is turned on, the pop-up message will be displayed. When the “Pop-up Message” is turned off, the following messages will not be displayed. To turn the “Pop-up Message” on: 1. Push the “NAVI” button. 2. Touch “Setup” on the “Menu” screen. twice to display page 3 Then touch of the “Setup” screen. This message appears when the system is in the POI mode and the map scale is over 0.5 mile (800 m) or greater. 3. Touch “ON” of “Pop-up Message”. The selected button is highlighted. 4. 116 Touch “OK”. The message appears when the map is switched to the dual map screen mode. V573_E ADVANCED FUNCTIONS z Current position/tire change calibration The current vehicle position mark can be adjusted manually. Miscalculation of the distance caused by tire replacement can also be adjusted. 1. POSITION/DIRECTION CALIBRATION When driving, the current vehicle position mark will be automatically corrected by GPS signals. If GPS reception is poor due to location, you can manually adjust the current vehicle position mark. Push the “NAVI” button. 2. Touch “Setup” on the “Menu” screen. twice to display page 3 Then touch of the “Setup” screen. 1. 3. Touch “Position / Direction”. Touch “Adjust” of “Calibration”. 2. Touch the eight directional touch screen button to move the cursor to the desired point on the map. 3. Touch “Enter”. 4. Touch the desired touch screen button. INFORMATION For additional information on the accuracy of a current vehicle position, see “Limitations of the navigation system” on page 246. 117 V573_E ADVANCED FUNCTIONS TIRE CHANGE CALIBRATION The tire change calibration function will be used when replacing the tires. This function will adjust the miscalculation caused by the circumference difference between the old and new tires. If this procedure is not performed when the tires are replaced, the current vehicle position mark may be incorrectly displayed. 4. Touch either the or to adjust the direction of the current vehicle position mark. 5. Touch “Enter”. The map screen will be displayed. To perform a distance calibration procedure, touch “Tire Change” on the “Calibration” screen. The message appears and the quick distance calibration is automatically started. A few seconds later, a map screen will be displayed. 118 V573_E OTHER FUNCTIONS SECTION OTHER FUNCTIONS z Maintenance information ······························································· 114 Maintenance information setting···················································· 114 Dealer setting················································································· 116 z Calendar with memo ······································································ 118 Adding a memo·············································································· 120 Editing a memo ·············································································· 121 Memo list························································································ 121 z Hands-free system (for cellular phone)········································ 123 ® Enter a Bluetooth phone ······························································ 128 ® Call on the Bluetooth phone························································· 131 ® Receive on the Bluetooth phone ·················································· 135 ® Talk on the Bluetooth phone ························································ 136 ® Change the settings of the Bluetooth phone································ 138 ® Set a Bluetooth phone·································································· 162 z Screen adjustment············································································ 168 z Settings····························································································· 169 z Select language················································································ 172 z Rear view camera system ································································· XX 119 V573_E OTHER FUNCTIONS Maintenance information — —Maintenance information setting When the navigation system is turned on, the “Information” screen displays when it is time to replace a part or certain components. (See page 22.) 1. Push the “INFO” button. 3. Touch the desired touch screen button. 2. Touch “Maintenance”. For details of each touch screen button, see “INFORMATION ITEMS” on page 115. “Delete All”: To cancel all conditions which have been inputted. “Reset All”: To reset the item which has satisfied a condition. “Set Dealer”: To register or edit dealer information. (See “ — Dealer setting” on page 116.) If “ON” is selected, the system gives maintenance information with the “Information” screen when the system is turned on. (See page 22.) If “OFF” is selected, the “Information” screen is disabled. When the vehicle needs to be serviced, the touch screen button color will change to orange. 120 V573_E OTHER FUNCTIONS INFORMATION ITEMS “ENGINE OIL”: Replace engine oil “OIL FILTER”: Replace engine oil filter “ROTATION”: Rotate tires “TIRES”: Replace tires “BATTERY”: Replace battery “BRAKE PAD”: Replace brake linings “WIPERS”: Replace wiper blades “LLC”: Replace engine coolant 4. “BRAKE OIL”: Replace brake fluid Notice of “Date”: The next maintenance date can be input. “ATF”: Replace ATF (Automatic Transmission Fluid) “SERVICE”: Scheduled maintenance “AIR FILTER”: Replace air filter “PERSONAL”: New information items can be created separately from provided ones Input the conditions. Notice of “Distance”: The driving distance until the next maintenance check can be input. “Delete”: To cancel the date and distance conditions. “Reset”: To reset the date and distance conditions. 5. Touch “OK”. The screen then returns to the “Maintenance” screen. INFORMATION z For scheduled maintenance information, please refer to the “Scheduled Maintenance Guide” or “Owner’s Manual Supplement”. z Depending on driving or road conditions, the actual date and distance may differ from the stored date and distance in the system. 121 V573_E OTHER FUNCTIONS — Dealer setting It is possible to register a dealer in the system. With dealer information registered, route guidance to the dealer is available. 1. Push the “INFO” button. 2. Touch “Maintenance” on the “Information” screen. 3. Touch “Set Dealer” on the “Maintenance” screen. 5. Touch the touch screen button to be edited. “Dealer”: To enter the name of a dealer. (See page 117.) “Contact”: To enter the name of a dealer member. (See page 117.) “Location”: To set a location. page 117.) 4. If the dealer has not been registered, enter the location of the dealer in the same way as for a destination search. (See “Destination search” on page 42.) When “Set Dealer” registration is finished, the “Edit Dealer” screen will be displayed. 122 (See “Phone #”: To set a telephone number. (See page 118.) “Delete Dealer”: To delete the dealer information displayed on the screen. “Enter ”: To set the displayed dealer as a destination. (See “Starting route guidance” on page 61.) V573_E OTHER FUNCTIONS z To edit “Dealer” or “Contact” z To edit “Location” 1. Touch “Dealer” or “Contact” on the “Edit Dealer” screen. 1. Touch “Location” on the “Edit Dealer” screen. 2. Enter the name using the alphanumeric keys. Up to 24 letters can be entered. 2. Touch the eight directional touch screen button to move the cursor to the desired point on the map. 3. 3. Touch “OK”. The previous screen will be displayed. Touch “Enter”. The previous screen will be displayed. 123 V573_E OTHER FUNCTIONS Calendar with memo — z To edit “Phone #” 1. Touch “Phone #” on the “Edit Dealer” screen. It is possible to enter memos for particular dates on the calendar. The system informs you of the memo entry when the system is turned on. (See page 23.) Memos can also be used for route guidance if the memo has been registered with location information. 1. Push the “INFO” button. 2. Touch “Calendar”. 2. Enter the number using numeral keys. 3. Touch “OK”. The previous screen will be displayed. 124 V573_E OTHER FUNCTIONS On this screen, the current date is highlighted in yellow. or : To change month. or : To change year. “Today”: To display the current month calendar (if another month will be displayed). “List”: To display the list of registered memos. (See “ — Memo list” on page 121.) Touching a date button on the “Calendar” screen displays the “Memo” screen. Memos can be edited by touching the list button. (See “ — Editing a memo” on page 121.) “Add Memo”: To add a memo. (See “ — Adding a memo” on page 120.) ”: To change the color of the “Mark mark displayed next to the date. To default the mark color, touch “Delete” on the “Mark Color” screen. “Date ”: To change the color of the date. To default the date color, touch “Delete” on the “Date Color” screen. “Prev. Day”: To go to the “Memo” screen of the previous date. “Today”: To go to the “Memo” screen for the current day. “Next Day”: To go to the “Memo” screen of the next date. 125 V573_E OTHER FUNCTIONS — Adding a memo If a memo is added, the system informs of the memo entry when the system is started on the memo date. (See page 23.) 1. Push the “INFO” button. 2. Touch “Calendar” on the “Information” screen. 3. Touch the date you want to add a memo on the “Calendar” screen. 6. Enter text using the keys. Up to 24 letters can be entered. After entering the text, touch “OK” at the bottom right of the screen. 4. Touch “Add Memo”. Up to 100 memos can be added. 7. When registering information on the memo, touch “Location”. A screen similar to the destination search screen appears. Search the same way as searching a destination. (See “Destination search” on page 42.) 5. 126 Touch “Memo”. V573_E OTHER FUNCTIONS — Editing a memo — Memo list The registered memo can be edited. It is possible to display a memo list by setting a condition. 1. Push the “INFO” button. 2. Touch “Calendar” on the “Information” screen. 3. Touch the day you want to edit a memo on the “Calendar” screen. 4. 1. Push the “INFO” button. 2. Touch “Calendar” on the “Information” screen. 3. Touch “List” on the “Calendar” screen. Touch the memo to be edited. 4. Touch the desired search condition to list the memos. “This Week”: To display the list of memos for the current week. “This Month”: To display the list of memos for the current month. “Future”: To display a list of future memos. 5. Touch the item to be edited. “Memo”: To edit a memo. (See “ — Adding a memo” on page 120.) “Location”: To change a registered location. (See “ — Adding a memo” on page 120.) “Past”: To display the list of past memos. “All”: To display the list of all memos. “Period”: To display the list of memos for a specified period. (See page 122.) “Enter ”: To set the registered location as a destination. (See “Starting route guidance” on page 61.) “Delete”: To delete the memo. 127 V573_E OTHER FUNCTIONS z To display memos for a specified period of time 1. Touch “Period” on the “Memo Search” screen. 5. To delete and/or edit the memo, touch the desired memo button. “Delete All”: To delete all the displayed memos. A message will be displayed. 6. To delete, touch “Yes”. To cancel the deletion, touch “No”. 2. Enter the period using the numeral keys. The period from January 1, 2009 through December 31, 2028 can be set for searching. 3. After setting the period, touch “OK”. The “Memo List” screen will be displayed. 128 V573_E OTHER FUNCTIONS Handsífree system (for cellular phone) — Hands-free system allows you to make or receive a call without taking your hands off the steering wheel by connecting your cellular phone. ® This system supports Bluetooth . Blue® tooth is a wireless data system by which you can call without your cellular phone being connected with a cable or placed on a cradle. If your cellular phone does not support ® Bluetooth , this system can not function. CAUTION Use a cellular phone or connect the ® Bluetooth phone only when safe and legal to do so. INFORMATION z In the following conditions, the system may not function. z The cellular phone is turned off. z The current position is outside the communication area. z The cellular phone is not connected. z The cellular phone has a low battery. ® z If Bluetooth devices are used for ® hands-free phone and Bluetooth audio connections at the same time, the following may occur. ® NOTICE Do not leave your cellular phone in the car. The temperature indoor may be high and damage the phone. z The Bluetooth connection may be cut off. z Noise may occur in the audio played from the portable player. z Even if using a cellular phone that is capable of both hands-free ® audio phone and Bluetooth connections, simultaneous connection may not be possible in some cases. 129 V573_E OTHER FUNCTIONS Indicates the condition of the ® Bluetooth connection. Ź Microphone You can use the microphone above when talking on the phone. The other party’s voice outputs from the driver’s speaker. When the received calls or received voice outputs, the audio from the Audio/video system or voice guidance from the navigation system will be muted. INFORMATION z Keep the volume of receiving voice down. Otherwise, echo is coming up. When you talk on the phone, speak clearly towards the microphone. z In the following situations, your voice may not reach the other party. (Mak- z Driving at the high speed. z The window is open. z Turning the air-conditioning vents towards the microphone. z The sound of the air-conditioning fan is loud. z The cellular phone network has a problem. 130 ® : No connection to Bluetooth . Indicates the amount of battery charge left. Empty z Talk alternately with the other party on the phone. If you talk at the same time, the voice may not reach each other. (It is not a malfunction.) z Driving on unpaved road. ing a traffic noise.) “Blue” indicates an excellent connection ® to Bluetooth . “Yellow” indicates a bad connection to ® Bluetooth , resulting in possible deterioration of voice quality. Full It is not displayed while the Bluetooth is not connected. ® The amount left does not always correspond with the one of your cellular phone. This system doesn’t have a charging function. Indicates the receiving area. “Rm” is displayed when receiving in Roaming area. “Ho” is displayed when receiving in Home area. V573_E OTHER FUNCTIONS Indicates the level of reception. Too bad Excellent The level of reception does not always correspond with the one of your cellular phone. ® The Bluetooth connection utilizes ® the Bluetooth antenna. The indica® tion of the Bluetooth connection may turn yellow and the system may not ® function when you use the Bluetooth phone in the following conditions: INFORMATION z Your cellular phone is hidden behind the display (behind the seat or in the glove box or console box). This system supports the following service. z Your cellular phone touches or is covered with metal materials. z HFP (Hands Free Profile) Ver. 1.0 z Your cellular phone is in the trunk. z OPP (Object Push Profile) Ver. 1.1 If your cellular phone does not support HFP, you cannot enter the ® Bluetooth phone, and take OPP service individually. Leave the Bluetooth phone in a place where the “Blue” indication is displayed. ® Bluetooth is a trademark owned by Bluetooth SIG, Inc. When you change ownership of your car: Personal information is stored when using Hands-free system. To protect your privacy, it is recommended to initialize the system before changing ownership of your car. (See “(c) Delete personal data” on page 170.) If you initialize the system, previously stored data will be deleted permanently. Please be aware that once initialize the system, deleted personal data can not be restored. You can initialize the following data in the system. z Phone book data z Dialed numbers and received calls z Speed dial ® z Bluetooth phone data z Security code 131 V573_E OTHER FUNCTIONS FCC ID: XEMNA08A02 IC ID: 8192A-NA08A02 MADE IN JAPAN This device complies with Part 15 of the FCC Rules and RSSí210 of industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. CAUTION FCC Warning: Changes or modifications not expressly approved by AISIN AW Co., Ltd for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: íReorient or relocate the receiving antenna. íIncrease the separation between the equipment and receiver. íConnect the equipment into an outlet on a circuit different from that to which the receiver is connected. íConsult the dealer or an experienced radio/TV technician for help. 132 V573_E OTHER FUNCTIONS — Register a Bluetooth® phone CAUTION: Radio Frequency Radiation Exposure This equipment complies with FCC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated with at least 20 cm and more between the radiator and person’s body (excluding extremities: hands, wrists, feet and legs). To use the hands-free system, you need to enter your phone into the system. Once you have registered it, you can make a hands-free call. Coílocation: This transmitter must not be coílocated or operated in conjunction with any other antenna or transmitter. 2. Touch “Telephone” to display the “Telephone” screen. 1. Push the “INFO” button. 3. Touch “Settings” to display the “Settings” screen. 4. Touch “Bluetooth ” to display the “Bluetooth Settings” screen. : Bluetooth is a registered trademark of Bluetooth SIG. Inc. 133 V573_E OTHER FUNCTIONS 5. Touch “Register” to connect your cellular phone to the system. 7. When the connection is completed, this screen is displayed. You do not need to enter the phone in case of using the same one. 6. When this screen is displayed, input the passcode displayed on the screen into the phone. For the operation of the phone, see the manual that comes with your cellular phone. If you want to cancel it, touch “Cancel”. 134 When this screen is displayed, follow the instructions on the screen and start again from step 5. V573_E OTHER FUNCTIONS ® z Connecting a Bluetooth phone AUTOMATICALLY Vehicles without smart entry and start system— When the engine switch is in ACC or ® ON position, the selected Bluetooth phone will be automatically connected and the connection result is displayed. This screen appears when the Blue® tooth phone is first connected after the engine switch is in ACC or ON position. When you register your phone, auto connection will be turned on. Always set it to this mode and leave the ® phone in a condition Bluetooth where connection can be established. Each time you touch “Auto Connect”, auto connection will be switched on or off. Vehicles with smart entry and start system— When the “ENGINE START STOP” switch is in the ACCESSORY or IGNITION ON mode, the selected ® Bluetooth phone will be automatically connected and the connection result is displayed. This screen appears when the Blue® tooth phone is first connected after the “ENGINE START STOP” switch is turned to the ACCESSORY or IGNITION ON mode. 135 V573_E OTHER FUNCTIONS MANUALLY When the auto connection failed or turned off, you have to connect Blue® tooth manually. z Reconnecting phone the Bluetooth ® Vehicles with smart entry and start system— ® If the Bluetooth phone is disconnected with a poor reception from the ® network when the Bluetooth “ENGINE START STOP” switch is in the ACCESSORY or IGNITION ON mode, the system automatically re® connects the Bluetooth phone. In this case, the connection result is not displayed. ® Touch “Connect” after having en® abled the Bluetooth connection on the phone. If the Bluetooth is disconnected on purpose such as you turned your cellular phone off, this does not happen. Reconnect it by the following methods. ® z Select the Bluetooth phone again. ® z Enter the Bluetooth phone. Vehicles without smart entry and start system— ® When the connection is completed, this screen is displayed. ® Now you can use the Bluetooth phone. If the Bluetooth phone is disconnected with a poor reception from the ® Bluetooth network when the engine switch is in ACC or ON position, the system automatically reconnects the ® Bluetooth phone. In this case, the connection result is not displayed. ® If the Bluetooth is disconnected on purpose such as you turned your cellular phone off, this does not happen. Reconnect it by the following methods. ® z Select the Bluetooth phone again. ® z Enter the Bluetooth phone. 136 V573_E OTHER FUNCTIONS — Call on the Bluetooth® phone After you enter the Bluetooth phone, you can call by using hands-free system. You can call using the 6 methods described below. z By phone book z By key pad The system has one phone book. You can register up to 1000 numbers. ® You can call by inputting the telephone number. You can call by phone book data which is transferred from your cellular phone. This cannot be operated while driving. This cannot be operated while driving. Touch the desired key to input the telephone number. 1. Touch “Phone Book” to display the “Phone Book” screen. Each time you touch Ż, an inputted digit is deleted. , the number When you touch you called last is inputted. Touch the on-hook button ( screen. ) on the 2. Select the desired number from the list. Touch the on-hook button ( screen. ) on the 137 V573_E OTHER FUNCTIONS z By dialed numbers You can call by dialed number. The system memorizes up to 5 dialed numbers. If it is more than 5, the oldest number is deleted. This cannot be operated while driving. z When you call by phone book, the name (if registered) is displayed. z When you call the same number continuously, only the newest number is registered. 1. Touch “Call Log” to display the “Outgoing Calls” screen. 2. Select the desired number from the list. Touch the on-hook button ( screen. 138 ) on the V573_E OTHER FUNCTIONS z By received calls You can call by received calls. When a call is received, the system memorizes up to 5 numbers. If it is more than 5, the oldest number is deleted. This cannot be operated while driving. z When a telephone number registered in the phone book is received, the name and the number are displayed. 1. Touch “Call Log” to display the “Outgoing Calls” screen. z Received calls which you did not answer are also memorized in the system and “Abs.” is displayed on the left side of the number. z Received calls which you refused are also memorized in the system and “ ” is displayed on the left side of the number. z Unnoticed telephone number such as a public telephone is not memorized in the system. 3. Select the desired number from the list. 2. Touch “Incoming Calls” to display the “Incoming Calls” screen. Touch the on-hook button ( screen. ) on the z An international phone call may not be made depending on the cellular phone which you have. 139 V573_E OTHER FUNCTIONS z By speed dial z By POI call You can call by registered telephone number which you selected from a phone book, dialed numbers and received calls. (See “(a) Registering the speed dial” on page 138 for registering the speed dial.) You can call by touching when it is displayed on the screen from navigation system. (See page 31 for details.) 1. Touch “Speed Dial” to display the “Speed Dial” screen. 2. Touch the desired number to call. You can change the page by touching “Speed Dial 2” or “Speed Dial 3”. When you push the telephone button while driving, the screen above appears. Touch the desired name to call. (The telephone number is not displayed.) 140 V573_E OTHER FUNCTIONS — Receive on the Bluetooth® phone — Talk on the Bluetooth® phone When a call is received, this screen is displayed with a sound. Touch to talk on the phone. While you are talking on the phone, this screen is displayed. You can do the operation below on the screen. To hang up the phone: To adjust the volume of the other party’s voice: Touch the off-hook button ( the screen. ) on To refuse to receive the call: Touch and hold it. To adjust the volume of received call: Touch “–” or “+” or use the volume switch of the steering wheel. On the international phone call, the other party’s name may not be displayed correctly depending on the cellular phone which you have. Touch “–” or “+” or use the volume switch of the steering wheel. To hang up the phone: Touch the off-hook button ( the screen. ) on To mute your voice: Touch “Mute”. To input a Key: Touch “0-9”. To transfer the call: Touch “Transfer Call”. You cannot change from Handsífree call to cellular phone call while driving. When you change from cellular phone call to Hands-free call, the Hands-free screen will be displayed and you can operate it on the screen. Transferring method and behavior are different depending on the cellular phone which you have. For the operation of the phone, see the manual that comes with your cellular phone. 141 V573_E OTHER FUNCTIONS Touch the desired number to input the key. To hang up the phone: Touch the off-hook button ( the screen. ) on This cannot be operated while driving. If the continuous tone signal is registered in a phone book, this screen appears. (If not registered, “Send” and “Exit” are not displayed.) Confirm the number displayed on the screen and touch “Send”. The number before marked sign will be sent. When you touch “Exit”, this function will be finished and normal tone screen appears. To hang up the phone: Touch the off-hook button ( the screen. ) on The continuous tone signal is the marked sign (p or w) and the number following telephone number. (ex. 056133w0123p#1 ) You can do this operation when you want to operate an answering machine or use a telephone service in bank for example. You can register the phone number and the code number in the phone book. 142 V573_E OTHER FUNCTIONS — Change the settings of the Bluetooth® phone z Sending a tone by the speed tone You can send a tone by the speed tone. (For registering the speed tone, see “(b) Registering the speed tone” on page 140.) Touch “Settings” to display the “Settings” screen. 1. Touch “Speed Tone”. You can change the settings of the phone. 2. Touch the desired touch screen button to send a tone. 143 V573_E OTHER FUNCTIONS (a) Registering the speed dial You can register the desired telephone number from phone book, dialed numbers and received calls. Up to 17 speed dial numbers can be registered. The 6th entry is the speed dial for redialing. 4. Touch number. the desired telephone 1. Touch “Speed Dial” to display the “Speed Dial Settings” screen. 5. Touch the touch screen button you want to register in. The latest dialed number is registered in the 6th item (speed redial). 2. Touch “Register” of “Speed Dial”. If you select a touch screen button you registered before, this screen is displayed. 6. Touch “Yes” if you want to overwrite it. 3. Select the data you want to register. 144 V573_E OTHER FUNCTIONS z Deleting the speed dial individually z Deleting all of the speed dial You can delete “01” - “17” of the speed dial individually. If you delete them all at once, all of 17 numbers are deleted. 1. Touch “Delete All” of “Speed Dial”. 1. Touch “Delete” of “Speed Dial”. 2. Touch “Yes”. 2. Touch the touch screen button you want to delete. 3. Touch “Yes”. 145 V573_E OTHER FUNCTIONS (b) Registering the speed tone You can register the desired tone number. Up to 6 speed tone numbers can be registered. 3. 1. Touch Tone”. “Register” of Input the number and touch “OK”. “Speed 4. Touch the desired touch screen button you want to register in. 2. Use the software keyboard to input the name. If you select a touch screen button you registered before, this screen is displayed. 5. Touch “Yes” if you want to overwrite it. 146 V573_E OTHER FUNCTIONS z Editing the speed tone You can edit the speed tone. 3. Use the software keyboard to input the name. 1. Touch “Edit” of “Speed Tone”. 4. Input the number and touch “OK”. 2. Touch the touch screen button you want to edit. 147 V573_E OTHER FUNCTIONS z Deleting the speed tone individually z Deleting all the speed tone You can delete “1” to “6” of the speed tone. If you delete them all at once, all of 6 numbers are deleted. 1. Touch “Delete All” of “Speed Tone”. 1. Touch “Delete” of “Speed Tone”. 2. 2. Touch the touch screen button you want to delete. 3. 148 Touch “Yes”. Touch “Yes”. V573_E OTHER FUNCTIONS z Automatic volume settings for high speed (c) Setting the volume You can set the volume one step up when the speed is over 50 mph (80 km/h). (When it is under 43 mph (70 km/h), previous volume is back.) Each time you touch “Adaptive Volume Control”, you can switch on or off. 1. Touch “Volume” to display the “Volume Settings” screen. 2. Touch “-” or “+” to adjust the “Voice Volume” or “Ring Volume”. “Voice Volume” ..... Adjusting the other party’s voice. “Ring Volume” ....... Adjusting volume. the ring 149 V573_E OTHER FUNCTIONS z Initializing the settings (d) Setting the screen You can initialize the settings. Touch “Default”. Touch “Yes”. 150 1. Touch “Screen” to display the “Screen Settings” screen. 2. Do the detail settings of the screen and touch “OK”. V573_E OTHER FUNCTIONS z Receiving call display z Auto answer You can select the method of the receiving call display. When a call is received, the display automatically changes to the talking screen and you can start to talk on the phone (without touching any button) after the preset time. Touch “Full” or “Icon”. “Full” mode.......When a call is received, the Hands-free screen is displayed and you can operate it on the screen. “Icon” mode......The message is displayed on the screen. Touch “ON” of “Auto Answer” and “-” or “+” to adjust the waiting time of auto answer within 1 - 60 seconds. 151 V573_E OTHER FUNCTIONS ® z The Bluetooth connection status at startup z Initializing the settings Vehicles with smart entry and start system— When the “ENGINE START STOP” switch is in the ACCESSORY or IGNITION ON mode and the Blue® tooth is automatically connected, the connection check is displayed. Touch “Default”. You can initialize the settings. Vehicles without smart entry and start system— When the engine switch is in ACC or ® ON position and the Bluetooth is automatically connected, the connection check is displayed. Touch “ON” or “OFF” of “Show Bluetooth connection status at startup”. : Bluetooth is a registered trademark of Bluetooth SIG. Inc. 152 Touch “Yes”. V573_E OTHER FUNCTIONS (e) Setting the phone book z Transferring a telephone number You can register phone numbers in the phone book. You can transfer the telephone num® bers in your Bluetooth phone to the system. Up to 1000 person’s data (up to 2 numbers a person) can be registered in the phone book. Transfer it while the engine is running. Touch “Phone Book” to display the “Phone Book Management” screen. 1. Touch “Transfer Data” to display the “Select Group” screen. You can do the detail settings of phone book. 2. Select the group you want to transfer to. 3. Touch “Overwrite” or “Add to”. 153 V573_E OTHER FUNCTIONS z Registering the phone book data You can register the phone book data. 4. Transfer the phone book data to ® the system using the Bluetooth phone. This screen appears while transferring. To cancel it, touch “Cancel”. If the transferring is interrupted on the way, the phone book data transferred until then can be memorized in the system. 1. Touch Book”. “Register” of “Phone 2. Touch the desired touch screen button to edit the phone book. 5. When this screen is displayed, the transfer is completed. 3. When you complete the edit, touch “OK”. When this screen is displayed, try the transfer operation again. 154 V573_E OTHER FUNCTIONS z Editing the name z Editing the phone number When you don’t input the name, the number is displayed. You can register the phone number in “TEL1” and “TEL2” separately. Up to 2 numbers a person can be registered. 1. Touch “Name”. 1. Touch “TEL1” or “TEL2”. 2. Input the number and touch “OK”. 3. Select the desired icon. 2. Use the software keyboard to input the name. 155 V573_E OTHER FUNCTIONS z Selecting the group You can set a group for a contact (for example: “Family”, “Friends”, “Office”...). It will then be easier for you to find this contact when needed, by using the group display. z Adding the data to the phone book You can add data to the phone book. You can select “No group” or “Group 01” to “Group 19”. “No group” is displayed if you don’t set the group. 1. 1. Touch “Add to”. Touch “Group”. 2. Select the data you want to add log data to. 2. Select the desired group. 3. Confirm the added data on the screen and touch “OK”. 156 V573_E OTHER FUNCTIONS z Editing the data You can edit the registered data. 3. Touch the desired touch screen button. 1. Touch “Edit”. When you edit the data, touch “OK”. 2. Select the data you want to edit. When you also touch “Edit” on this screen, you can edit it. 157 V573_E OTHER FUNCTIONS z Deleting the data You can delete the data. You can also delete it in the following way. When you release your car, delete all your data on the system. 1. 1. Touch “Phone Book”. 2. Select the desired data. 3. Touch “Delete”. Touch “Delete” of “Phone Book”. 2. Touch the desired touch screen button. 3. 158 Touch “Yes”. V573_E OTHER FUNCTIONS z Deleting all the phone data 4. Touch “Yes”. 1. Touch “Delete All” of “Phone Book”. 2. Select the deleting method. “Group Data” ....... Deleting all the phone data in group. “All Contact Data” ....... Deleting all the phone data. 3. When you select “Group Data”, the “Select Group” screen is displayed. 159 V573_E OTHER FUNCTIONS You can also delete it in the following way. 4. 5. 160 Select the desired group. 1. Touch “Phone Book”. 2. Touch “Delete All”. 3. Touch “Yes”. Touch “Yes”.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Author : Karsten Koller Create Date : 2009:11:11 15:56:23+09:00 Modify Date : 2009:11:11 15:56:31+09:00 XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Metadata Date : 2009:11:11 15:56:31+09:00 Creator Tool : PScript5.dll Version 5.2.2 Format : application/pdf Title : User Manual.pdf Creator : Karsten Koller Document ID : uuid:5f6f1d9f-1291-449a-89aa-b163e3b02cf0 Instance ID : uuid:970234ea-2b55-4e64-a138-e3fba1893011 Producer : Acrobat Distiller 9.0.0 (Windows) Page Count : 80EXIF Metadata provided by EXIF.tools