AISOLUTION KDC100 Barcode Reader User Manual KDC100 User Manual English

AISOLUTION CO., LTD. Barcode Reader KDC100 User Manual English

User Manual

KDC100USERMANUALRev0.9
오류! 스타일이 정의되어 있지 않습니다. KDC100 Introduction The AISOLUTION data collector KDC100 is a compact, light and powerful reader with a rechargeable battery, OLED display, large memory and connections to PC, PDA and cellphone using serial and USB cable. KDC100 is well suited for a variety of portable applications. It can be used as an accessory to a PDA or cellphone as well as an independent data collector. The key features of KDC100 are • Bright OLED display • Built in swing-out USB connector • Rechargeable Li-Poly battery with separate installation space for easy replacement • Top of the line laser scan engine • Auto uploading scanned data to the host device upon connecting either USB or serial port • Large data memory The KDC100 also provides seamless integration of barcode capability into your application by providing a user friendly software development kit.
Installation and Operation Installation Prior to installing the included software on your PC, verify that your system meets the minimum system requirements. 1. Microsoft Windows operating system: 2000 or XP 2. Free space on hard drive of 512 MB. 3. Accessible USB port for connecting the KDC100 to your computer 4. 256M byte memory or larger. Locationofbuttons OLED Display USB & Serial port Scan Button Upper Menu Button Lower Menu Button Swing-out USB LED
오류! 스타일이 정의되어 있지 않습니다. BasicOperation Readingbarcodes Point the KDC100 to the barcode and press the trigger key. A High beeper tone will be heard upon a successful scan. The front panel LED will illuminate in green. The scanned barcode will be displayed, along with barcode type and time stamp. When the barcode cannot be read, try the following: z Check that the width of barcode label does not exceed the width of the light beam. z Change the angle between the barcode and KDC100. z Change the distance between the barcode and KDC100. z Check option settings. UploadbarcodedatatoPC. Use the included Synchronization program to upload barcode data from KDC100 to your PC. Start KTSync program Configure Synchronization options Execute Sync. Operation KDC100Menus The user can access menu selection mode by pushing both buttons on the right side of the KDC100 simultaneously. The table below summarizes the KDC 100 menus. 0123456789012Code3920061231:235959
Level 1 Level 2 Note View Data Delete Review and delete stored data EAN13 Enable/Disable Symbology EAN8 Enable/Disable Symbology UPCA Enable/Disable Symbology UPCE Enable/Disable Symbology CODE39 Enable/Disable Symbology ITF14 Enable/Disable Symbology CODE128 Enable/Disable Symbology I2of5 Enable/Disable Symbology CODABAR Enable/Disable Symbology EAN128 Enable/Disable Symbology CODE93 Enable/Disable Symbology CODE35 Enable/Disable Symbology BooklandEAN Enable/Disable Symbology EAN13withAddon Enable/Disable Symbology EAN8withAddon Enable/Disable Symbology UPCAwithAddon Enable/Disable Symbology Set Barcodes UPCEwithAddon Enable/Disable Symbology CodaBar_NoStartStopChars ReverseDirection UPCE_as_UPCA EAN8_as_EAN13 UPCE_as_EAN13 ReturnCheckDigit VerifyCheckDigit UPCA_as_EAN13 I2of5_VerifyCheckDigit Code39_VerifyCheckDigit I2of5_ReturnCheckDigit Code39_ReturnCheckDigit UPCE_ReturnCheckDigit UPCA_ReturnCheckDigit Barcode Options EAN8_ReturnCheckDigit
오류! 스타일이 정의되어 있지 않습니다. EAN13_ReturnCheckDigit Scan Angle Narrow/Wide Filter Normal/High Time Out 100..10000msec Minimum Barcode Length 2..36 Scan Options Security Level 1..4 Memory Status # of stored barcode, amount of remaining memory Sleep Timeout 1sec..10sec Date & Time YYYY:MM:DD, HH:MM:SS Battery % left System Version FW version. Serial Number LEDStatus LED Color Status Green z Successful Reading z USB is connected and battery is fully charged Yellow z Low battery Red z No reading z Empty battery
Synchronization KTSync has two major functions – Synchronization and Keyboard Emulation. AISOLUTION Synchronization provides data upload functions to any Windows XP application. Keyboard Emulator enters scanned data directly into any XP application programs as if it was manually typed on the keyboard. KTSync also provides the following additional functions: z Prefixes, suffixes add function which further eliminates the need for manual data entry z Symbology and Scan Option selector z Barcode Wedging. You will see the following screen when launching KTSync application. ConnectionSettings The user can manually configure the connection with the PC by using the ”Connection Settings” option. Please check the “Try to connect automatically” option if you desire to set up the connection between your KDC100 and Windows XP automatically.
오류! 스타일이 정의되어 있지 않습니다. Synchronization The AISOLUTION KDC100 provides several synchronization options with hosts such as PC, PDA and Cellphone. The standard package includes the software for Windows XP synchronization. If you need cellphone or PDA integration, please contact your local representative. The user can configure various Synchronization and Keyboard Emulation function in the “Synchronization Settings” option.
BarcodeSelection The user can configure barcode options in the Scan Module Settings menu.
CAUTION: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment WAR NING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. INFORMATION TO USER: This equipment has been tested and found to comply with the limit of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation; if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1. Reorient / Relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on a circuit difference from that to which the receiver is connected. 4. Consult the dealer or an experienced radio/TV technician for help

Navigation menu