ALPS ALPINE 9ZUA130 Bluetooth Module User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1221340
Application ID	E+E8Ba/7qqdoozQOoGzAig==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	13.64kB (170445 bits)
Date Submitted	2009-12-31 00:00:00
Date Available	2010-02-14 00:00:00
Creation Date	2009-12-10 15:11:20
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2009-12-10 15:11:20
Document Title	Microsoft Word - IAM2.1 BT module…C…fi…X…g…„†[…V…⁄…fi…}…j…–…A…‰.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	18628

Installation Manual
This module board is to be installed only by the professional line operator and used only for
car audio produced by ALPINE ELECTRONICS, INC.. When this Bluetooth Module
Board is installed in the Car Audio, we shall consider the following points;
1. Since “IAM2.1 BT PWB US”owns its FCC ID/IC Number, we shall affix an exterior label on
the outside of the product if the FCC ID is not visible. The exterior label shall use wording such
as either ”Contains Transmitter Module Board FCC ID: A269ZUA130 / IC: 700B-IAM2101” or
“Contains FCC ID: A269ZUA130 / IC: 700B-IAM2101”.
2. “IAM2.1 BT PWB US” complies with requirements of sub-sections 15.19(a)(3) in FCC Rules
Part 15 Subpart C. The manual statement 15.19 (a)(3) is included User Guide of the product.
3. “IAM2.1 BT PWB US” is to be installed only by the professional line operator as shown in
following pictures. (Fig 1 and 2)
Fig 1. Front side of “IAM2.1 BT PWB US”
BT Part
Installation Manual
Fig 2. Front view of “IAM2.1 BT PWB US” to be equipped for a Car Audio (example)
IAM2.1 BT PWB US
There isn’t an official user manual for this Bluetooth Module Board “IAM2.1 BT PWB US”.
However, user manuals of final product, which have Bluetooth module board, must contain
notification corresponding to the following description.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This device complies with Part 15 of FCC Rules and RSS-Gen of IC Rules. Operation is subject
to the following two conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired operation of
this device.
This transmitter must not be co-located or operated in conjunction with any other antenna
or transmitter.
This equipment complies with FCC/IC radiation exposure limits set forth for uncontrolled
equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to
OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very
low levels of RF energy that it deemed to comply without maximum permissive exposure
evaluation (MPE). But it is desirable that it should be installed and operated with at least 20cm
and more between the radiator and person’s body (excluding extremities: hands, wrists, feet
and ankles).

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Create Date                     : 2009:12:10 15:11:20+09:00
Modify Date                     : 2009:12:10 15:11:20+09:00
Page Count                      : 2
Creation Date                   : 2009:12:10 06:11:20Z
Mod Date                        : 2009:12:10 06:11:20Z
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : 18628
Metadata Date                   : 2009:12:10 06:11:20Z
Creator                         : 18628
Title                           : Microsoft Word - IAM2.1 BT module.C...X.g...[.V.....}.j...A...doc

EXIF Metadata provided by EXIF.tools