ALPS ALPINE UGPZ6 Bluetooth Module User Manual

Download:
Mirror Download [FCC.gov]
Document ID	550756
Application ID	3Io1NpBLX7DUNP70/DNF2w==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	6.27kB (78385 bits)
Date Submitted	2005-06-13 00:00:00
Date Available	2005-06-13 00:00:00
Creation Date	2005-05-24 21:16:17
Producing Software	Acrobat Distiller 6.0.1 (Windows)
Document Lastmod	2005-05-24 21:16:17
Document Title	untitled

-1-
BluetoothTM Module Design Application
Model number
UGPZ6-####
Digit
Digit 0~3
Digit 4
Function
Output Power class2 compliant
SMD (Physical connection)
Flash Memory(8M),
Reference oscillator built in
USB and SPI interfaces
Definition
Bluetooth™ Module
Including Base Band
Mechanical form
Features
Digit 5
Status of products
Digit 6
Digit 7~8
Digit 9
Interface dependent
Serial number
Revision
¾
‹
‹
‹
‹
‹
‹
‹
Document revision
V1.0
Contents
UGPZ (Board to board)
6: 25x12x2.6mm / Class2
/ RF connector / VCC=3.3 V
X: Engineering Sample
-: Mass production
C: USB with RF connector
Customer dependent
Starting from A
Features
BluetoothTM Specification V2.0 + EDR support
Compact package size (13.5x10.0x2.1mm) can be fit to any type of product
RF connector accompanied
Built-in Link controller, Link Manager Protocol
HCI interface over USB
Class 2 support
Built-in Flash Memory (8Mbit), system clock
¾ Application
„ Mobile Phones, PCs, PDA, Terminal Adapters, Digital Cameras, Printers, Automotive, Other
Peripheral Devices
X2
PLL
Bluetooth
Link
controller
Bluetooth
Protocol
Managemen
S-RAM
Flash
ROM
SPI
Demod
USB
Ref
OSC
ALPS ELECTRIC CO., LTD.
page1
-2-
¾
FEATURES LIST
Features
Power level
Program memory
RAM
Reference oscillator
Sub clock oscillator
Serial data interface
Physical connector
¾
Contents
+4 dBm Max.
8M bit Flash Memory
32k bytes x 16 bits
Built in
Built in
USB
B to B Connector
MECHANICAL CHARACTERISTICS
Aspect
Dimensions
Weight
No contamination / No scratches / No strains
25x12x2.6mm
2.4g Typ.
¾
COMMON PHYSICAL LAYER SPECIFICATIONS
Operating Frequency
2402 MHz to 2480 MHz
Carrier Spacing
1.0 MHz
Channel
79
Duplexing
TDD
Symbol Rate
1 Mbps / 2Mbps / 3Mbps
Modulation Method
GFSK BbT = 0.5
π/4 DQPSK
8 DPSK
¾
PHYSICAL INTERFACE (HCI transport layer)
The BluetoothTM Module contains USB interfaces. Detail of each interface is described on the following
sub-sections.
¾
USB
USB interface is compliant with Universal Serial Bus Specification 1.1 & 2.0 and supports 12 Mbps “Full
Speed” And this USB interface support single ended data interface. And also USB interface according to
Bluetooth™ Specification 2.0 + EDR “USB transport layer” as well, including interface suggested by Intel
for further power management.
Summary of supported features
Items
Application
Speed
USB Windows Class
USB Sub class
USB Protocol code
OHCI/UHCI
SCO support
Transfer mode
USB data packets length
Description
BluetoothTM Module works as a "device" and answer on "requests" from a
"master host controller" as for example a PC.
"High speed mode" only
Wireless Controller (bDeviceClass=0xE0h)
RF Controller (bDeviceSubClass=0x01h)
Bluetooth™ Programming (bDeviceProtocol=0x01)
Supported
SCO supported as Isochronous transfer mode
Bulk, Control and Isochronous supported
All packet size supported according to Bluetooth™ Spec 2.0 + EDR
ALPS ELECTRIC CO., LTD.
page2
-3-
Number of endpoints
USB manufacture code
HCI extended commands
6 end points
Unless specified, persistent storage saving "ALPS" as manufacture
All private commands will be encapsulated to payload and de-encapsulated in
Module Stack
Description of each hardware interface
Module Pin
Name
I/O
Requirement
USB_D+
USB_D-
D+
D-
bi-dir
bi-dir
Mandatory
Mandatory
VBUS_IN
VBUS
input
in proposal
Description
Defined in USB spec 1.1,2.0
Defined in USB spec 1.1,2.0
To protect to be drawn current from D+ when Host
(Hub or root) in power down but BT Module exiting
it is used for self-powered mode
Reset Control
Reset mode
Requirement
Description
HCI reset commands
Mandatory
Software reset. Supported by ALPS Bluetooth™ Driver
Drive D+ D- low simultaneously
Mandatory
USB defined reset
¾ Software interface
BluetoothTM Module contains link controller, link manager & HCI transport layer which can interface to standard
H4.
Also single PCM interface allows you to transcode CVSD, A-Law, µ-LAW codec switched by standard HCI
command. The architecture of Module listed as below.
SDP
Audio Driver
SCO
IrMCDLL
OBEX DLL
VCOMM
RFCOMM
L2CAP
USB
IP
PPP
WinSock
NDIS
Ethernet
Driver
HCI HAL
ACL
HCI Firmware
Link Manager
Base Band Link Controller
Radio Interface driver
RF Radio
BluetoothTM Module
UGXZ5-####
ALPS ELECTRIC CO., LTD.
page3

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 3
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:c53063a3-d827-4b46-b150-0aac3e86d2b7
Producer                        : Acrobat Distiller 6.0.1 (Windows)
Modify Date                     : 2005:05:24 21:16:17+09:00
Create Date                     : 2005:05:24 21:16:17+09:00
Document ID                     : uuid:0cbaad83-b399-4865-b035-84660b01fea2
Format                          : application/pdf
Title                           : untitled

EXIF Metadata provided by EXIF.tools