ALPS ALPINE WB1U243 Jaguar remote keyless entry transmitter User Manual ch2

Download:
Mirror Download [FCC.gov]
Document ID	429218
Application ID	TCO/V8drdCkpq3ew14xRgg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	3.13kB (39131 bits)
Date Submitted	2004-06-09 00:00:00
Date Available	2004-06-09 00:00:00
Creation Date	2001-07-24 11:15:38
Producing Software	Acrobat Distiller 4.05 for Windows
Document Lastmod	2001-07-24 11:27:53
Document Title	ch2.fm
Document Creator	ADOBEPS4.DRV Version 4.31
Document Author:	nigel

Security and locks
Security features
Panic alarm
The security system has been designed
for:
• Prevention of theft of the vehicle.
• Prevention of theft of items from the
vehicle.
• Personal security.
The security system is integrated with the
vehicle electronics and engine
management systems making it far more
difficult for a thief to penetrate and steal
the vehicle.
When in or near the vehicle, the alarm
can be set off to deter a possible offender.
For this feature to operate, the key must
not be in the ignition switch.
Pressing the headlamp convenience/panic
button on the key transmitter three times
within three seconds will activate the
‘Panic Alarm’.
The alarm is stopped by:
• Putting the key into the ignition
switch and turning to position ‘II’ or,
• Pressing either the transmitter panic
button three times or one press of the
unlock button, or,
• Unlock the vehicle from the driver’s
door with a key.
Battery reconnection
If the battery has been disconnected and
is subsequently reconnected, the alarm
system will resume the same state as
before the battery was disconnected.
If the alarm was sounding when the
battery was disconnected it will sound
again when the battery is reconnected
and will need:
• The transmitter unlock button to be
pressed or,
• Key placed in the ignition switch and
turned to position ‘I’ to disarm it or,
• Unlock the vehicle from the driver’s
door with a key.
Radio frequency
The radio frequency remote system
operates on a frequency subject to USA
Federal Communications Commission
(FCC) rules.
The device complies with Part 15 of the
FCC rules and RSS-210 of the Industry
Canada. Operation is subject to the two
following conditions:
1. The device may not cause harmful
interference, and,
2-11
2. This device must accept any
interference received, including
interference that may cause undesired
operation.
The key transmitter radio frequency
approval numbers for the USA and
Canada are as shown below.
USA – NHVWB1U241
Canada – 3495 103 2304.
Note: The manufacturer is not
responsible for any radio interference or
TV interference caused by unauthorised
modifications to this equipment. Changes
or modifications not expressly approved
by the party responsible for compliance
could void the user’s authority to operate
the equipment.
Caution: The key-ring transmitter
may suffer interference from other
legal users of this radio frequency
band, such as radio amateurs,
medical equipment, remote controls
or alarm systems.To lock or unlock
the vehicle either use a key or
operate the key-ring transmitter as
close to the security antenna as
possible.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2001:07:24 11:15:38
Producer                        : Acrobat Distiller 4.05 for Windows
Author                          : nigel
Creator                         : ADOBEPS4.DRV Version 4.31
Title                           : ch2.fm
Modify Date                     : 2001:07:24 11:27:53+01:00
Page Count                      : 1

EXIF Metadata provided by EXIF.tools