ALPS ALPINE WK1A001 Switch Assy Immobilizer Antenna User Manual ADVERTISING LITERATURE BROCHURE

Alps Electric Co., Ltd. Switch Assy Immobilizer Antenna ADVERTISING LITERATURE BROCHURE

User Manual

User’s Manual Switch Assy Immobilizer Antenna Model No.: TWK1A001 There is no User’s Manual because this equipment will not be sold to end-user directly.
　The connector is arranged as shown in the figure below.■CAUTION■DC6.5V～16VAC/DC SupplyOperating voltageDC6.5～16V(Inner:DC 5V)DC12VRange of voltageConsumption currentUnder 0.7mA（Standby current）W45xL72xH45（mm）FCC WARNINGChanges or modifications not expressly approved by the party responsiblefor compliance could void the user’s authority to operate the equipment.Size・Give a shock.・Get it wet. If it got wet, wipe and dry up.・Disassembly and modification. This device complies with Part 15 of FCC Rules and RSS-Gen of ICRules. Operation is subject to the following two conditions: (1) this devicemay not cause interference, and (2) this device must accept anyinterference, including interference that may cause undesired operation ofthis device.Operation of frequency125kHzUser's Manual　It communicates with IC used both as Transponder and Passive RKEthrough LF ANT(Z axis) of I-key H/U, and operates as ANT to exchangecommunication data depending on community signal with BCM.　The immobilizer antenna communicates with the transponder in thehand unit when the hand unit is brought close, and receives the code ofthe key. The immobilizer is used by bringing the hand unit close as shownin figure.Product name : Switch Assy Immobilizer AntennaType : TWK1A001 Please DO NOT the following. Engine is not started by failure ofelectronic parts. (Product can not receive the signal correctly) Pay attention to the following.(The operation range might be changed by the environment. )・Do not contact and bring metals close to the engine SW and thekey.・It may not be operated when using the equipment of the samefrequency band in the vicinity.Operating temperaturerange-40~＋85　degree CMAX 0.7mA(@12.5V 25℃) at standbyWeight 0.04kgConsumption currentspecMAX 150mA(@12.5V 25℃) at operationHUND UNIT SWITCH ASSY IMMOBILIZER

Navigation menu