ALPS ALPINE WK1A002 Immobilizer Antenna User Manual user manual

Alps Electric Co., Ltd. Immobilizer Antenna user manual

User Manual

　The connector is arranged as shown in the figure below.Terminal No. I/O1-2I3 I/O4-■CAUTION■Operating temperaturerange-40~＋85　degree CMAX 0.5mA(@12.5V 25℃) at standbyWeight Please DO NOT the following. Engine is not started by failure ofelectronic parts. (Product can not receive the signal correctly) Pay attention to the following.(The operation range might be changed by the environment. )・Do not contact and bring metals close to the engine SW and thekey.・It may not be operated when using the equipment of the samefrequency band in the vicinity.0.03kgConsumption currentspecMAX 100mA(@12.5V 25℃) at operationUser's Manual+BCLOCKDATA　It communicates with IC used both as Transponder and Passive RKEthrough LF ANT(Z axis) of I-key H/U, and operates as ANT to exchangecommunication data depending on community signal with BCM.　The immobilizer antenna communicates with the transponder in thehand unit when the hand unit is brought close, and receives the code ofthe key. The immobilizer is used by bringing the hand unit close asshown in figure.Product name : IMMOBILIZER ANTType : TWK1A002Terminal NameFCC WARNINGChanges or modifications not expressly approved by the partyresponsible for compliance could void the user’s authority to operate theequipment.Size・Give a shock.・Get it wet. If it got wet, wipe and dry up.・Disassembly and modification. This device complies with Part 15 of FCC Rules and RSS-Gen of ICRules. Operation is subject to the following two conditions: (1) thisdevice may not cause interference, and (2) this device must accept anyinterference, including interference that may cause undesired operationof this device.Operation of frequency 125kHzDC8～16VGNDAC/DC SupplyOperating voltage DC8～16V(Inner:DC 5V)DC12VRange of voltageConsumption current Under 0.5mA（Standby current）W40xL62xH49（mm）HUND UNIT IMMOBILIZER

Navigation menu