ALPS ALPINE WK1A004 Ant Assy-Immobiliser User Manual ADVERTISING LITERATURE BROCHURE

Alps Electric Co., Ltd. Ant Assy-Immobiliser ADVERTISING LITERATURE BROCHURE

User Manual

User’s Manual ANT ASSY-IMMOBILISER Model No.: TWK1A004 There is no User’s Manual because this equipment will not be sold to end-user directly.
　The connector is arranged as shown in the figure below.Terminal No. I/O1-2I3 I/O4-User's Manual+BCLOCKDATA　It communicates with IC used both as Transponder and Passive RKEthrough LF ANT(Z axis) of I-key H/U, and operates as ANT to exchangecommunication data depending on community signal with BCM.　The ANT ASSY-IMMOBILISER communicates with the transponder inthe hand unit when the hand unit is brought close, and receives the codeof the key. The immobiliser is used by bringing the hand unit close asshown in figure.Product name : ANT ASSY-IMMOBILISERType : TWK1A004Terminal NameGNDHAND UNIT IMMOBILISER
■CAUTION■Approved by TRA Pay attention to the following.(The operation range might be changed by the environment. )・Do not contact and bring metals close to the engine SW and thekey.・It may not be operated when using the equipment of the samefrequency band in the vicinity.Operating temperaturerange-40~＋85　degree CMAX 0.5mA(@12.5V 25℃) at standbyWeight 0.03kgConsumption currentspecMAX 150mA(@12.5V 25℃) at operationAC/DC SupplyOperating voltage DC8～16V(Inner:DC 5V)DC12VRange of voltageConsumption current Under 0.5mA（Standby current）W40xL62xH49（mm）SizeDC8～16V・Disassembly and modification.This device complies with Part 15 of FCC Rules and RSS-Gen of ICRules. Operation is subject to the following two conditions: (1) this devicemay not cause interference, and (2) this device must accept anyinterference, including interference that may cause undesired operationof this device.FCC WARNINGChanges or modifications not expressly approved by the partyresponsible for compliance could void the user’s authority to operate theequipment.Operation of frequency・Give a shock.・Get it wet. If it got wet, wipe and dry up.125kHz Please DO NOT the following. Engine is not started by failure ofelectronic parts. (Product can not receive the signal correctly)
INQUIRIESNAME OF COMPANY: ALPS ELECTRIC CO., LTD.Phone: +81(03)3726-1211WEBSITE: http://www.alps.com/index.html

Navigation menu