AMX ACBVIBE Sound Bar User Manual AcendoVibe SafetyInstructions REV A10 ENGLISH

AMX LLC Sound Bar AcendoVibe SafetyInstructions REV A10 ENGLISH

Contents

User Manual Safety Instruction

ACV-5100 (ACENDO VIBE™ CONFERENCING SOUND BAR WITH CAMERA)ACV-2100 (ACENDO VIBE™ CONFERENCING SOUND BAR)ACV-REM-100 (ACENDO VIBE™ REMOTE CONTROL)IMPORTANT SAFETY NOTES/COMPLIANCE INFORMATIONPRODUCTS COVERED:IMPORTANT SAFETY INSTRUCTIONS      ESD WARNING  Warning: Batteries shall not be exposed to excess of heat such as sunshine, fire, etc.1) READ these instructions.2) KEEP these instructions.3) HEED all warnings.4) FOLLOW all instructions.5) DO NOT use this apparatus near water.6) CLEAN ONLY with dry cloth.7) DO NOT block any ventilation openings. Install in accordance with the manufacturer's instructions.8) DO NOT install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.9) DO NOT defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a thirdgrounding prong. The wider blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsoleteoutlet.10) PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.11) ONLY USE attachments/accessories specified by the manufacturer.12) UNPLUG this apparatus during lightning storms or when unused for long periods of time.13) REFER all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has beenspilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.14) DO NOT expose this apparatus to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on the apparatus.15) To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug from the AC receptacle.16) Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. 17) DO NOT overload wall outlets or extension cords beyond their rated capacity as this can cause electric shock or fire. The exclamation point, within an equilateral triangle, is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of suff icient magnitude to constitute a risk of electrical shock to persons.ESD Warning: The icon to the left indicates text regarding potential danger associated with the discharge of static electricity from an outside source (such as human hands) into an integrated circuit, often resulting in damage to the circuit.WARNING:  To reduce the risk of fire or electrical shock, do not expose this apparatus to rain or moisture.WARNING:  No naked flame sources - such as lighted candles - should be placed on the product.WARNING:  Equipment shall be connected to a MAINS socket outlet with a protective earthing connection.WARNING:  This product is intended to be operated ONLY from the voltages listed on the back panel or the recommended, or included, power supply of the product. Operation from other voltages other than those indicated may cause irreversible damage to the product and void the products warranty. The use of AC Plug Adapters is cautioned because it can allow the product to be plugged into voltages in which the product was not designed to operate. If the product is equipped with a detachable power cord, use only the type provided with your product or by your local distributor and/or retailer. If you are unsure of the correct operational voltage, please contact your local distributor and/or retailer. If the product is equipped with a detachable power cord, use only the type provided, or specified, by the manufacturer or your local distributor. WARNING: To avoid ESD (Electrostatic Discharge) damage to sensitive components, make sure you are properly grounded before touching any internal materials. When working with any equipment manufactured with electronic devices, proper ESD grounding procedures must be followed to make sure people, products, and tools are asfree of static charges as possible. Grounding straps, conductive smocks, and conductive work mats are specifically designed for this purpose.Anyone performing field maintenance on AMX equipment should use an appropriate ESD field service kit complete with at least a dissipative work mat with a ground cord and aUL listed adjustable wrist strap with another ground cordWARNING: Do Not Open! Risk of Electrical Shock. Voltages in this equipment are hazardous to life. No user-serviceable partsinside. Refer all servicing to qualified service personnel. Place the equipment near a main power supply outlet and make sure that you can easily access the power breaker switch.
3000 RESEARCH DRIVE, RICHARDSON, TX 75082 AMX.com | 800.222.0193 | 469.624.8000 | +1.469.624.7400 | fax 469.624.7153AMX (UK) LTD, AMX by HARMAN - Unit C, Auster Road, Clifton Moor, York, YO30 4GD United Kingdom • +44 1904-343-100 • www.amx.com/eu/ LAST REVISED:12/18/2017FCC AND CANADA EMC COMPLIANCE INFORMATION: This device complies with part 15 of the FCC Rules.  Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received,including interference that may cause undesired operation.NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmfulinterference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy, and if it is not installed and used in accordance with the instructionmanual, it may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct theinterference at his own expense.WARNING: This equipment is compliant with Class A of CISPR 32.  In a residential environment this equipment may cause radio interference. WARNING: This product must not be used in residential areas. NOTE: For interference purposes, the residential and domestic environments are defined as an environment within 10meters of radio or broadcast receiving equipment or home use. CAN ICES-3 (A)/NMB-3(A) Note: This unit was tested with shielded cables on the peripheral devices. Shielded cables must be used with the unit to ensure compliance.CAUTION: Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate this device.WIRELESS TRANSMITTER COMPLIANCE INFORMATION:The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met.Le terme "IC:" avant le numéro de certification radio signif ie seulement que les spécifications techniques d'Industrie Canada ont été respectées.This device complies with part 15 of the FCC Rules and the applicable Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmfulinterference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire debrouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator andyour body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.Cet appareil est conforme à FCC et IC l'exposition aux rayonnements limites f ixées pour un environnement non contrôlé. Cet appareil doit être installé et utilisé avec une distance minimale de 0 cm entre le radiateur etvotre corps. Cet transmetteur ne doit pas être co-situé ou opérant en liaison avec toute autre antenne ou transmetteur.EU COMPLIANCE INFORMATION:Hereby, AMX LLC declares that the equipment type ACV-5100GR / ACV-5100BL is in compliance with the following: European Union Restriction of Hazardous Substances Recast (RoHS2) Directive 2011/65/EU; European Union WEEE (recast) Directive 2012/19/EU; European Union Registration, Evaluation, Authorization and Restriction of Chemicals (REACH) Directive 1907/2006 European Radio Equipment Directive (RED) 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:  http://www.amx.com/techcenter/certifications.asp. This product contains batteries that are covered under the 2006/66/EC European Directive, which cannot be disposed of with normal household waste. Please follow local regulations.WIRELESS FREQUENCY RANGE AND WIRELESS OUTPUT POWER:2402-2480 MHz5.2 mWWEEE NOTICE:   This appliance is labeled in accordance with European Directive 2012/19/EU concerning waste of electrical and electronic equipment (WEEE). This label indicates that thisproduct should not be disposed of with household waste. It should be deposited at an appropriate facility to enable recovery and recycling.

Navigation menu