AMX MVP9I The MVP-9000i is a touch panel for automation controls User Manual
AMX LLC The MVP-9000i is a touch panel for automation controls
AMX >
user manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1509971 |
| Application ID | SGi5FFiIKfvVzvv0E+weGQ== |
| Document Description | user manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 265.85kB (3323138 bits) |
| Date Submitted | 2011-07-27 00:00:00 |
| Date Available | 2011-07-27 00:00:00 |
| Creation Date | 2011-05-18 13:00:14 |
| Producing Software | Acrobat Distiller 9.4.2 (Windows) |
| Document Lastmod | 2011-05-18 17:25:48 |
| Document Title | untitled |
| Document Creator | FrameMaker 10.0 |
Operation/Reference Guide MVP-9000i 9" Modero® ViewPoint® Touch Panel with Intercom Touch Panels Last Revised: 5/18/2011 AMX Limited Warranty and Disclaimer This Limited Warranty and Disclaimer extends only to products purchased directly from AMX or an AMX Authorized Partner which include AMX Dealers, Distributors, VIP’s or other AMX authorized entity. AMX warrants its products to be free of defects in material and workmanship under normal use for three (3) years from the date of purchase, with the following exceptions: • Electroluminescent and LCD Control Panels are warranted for three (3) years, except for the display and touch overlay components are warranted for a period of one (1) year. • Disk drive mechanisms, pan/tilt heads, power supplies, and MX Series products are warranted for a period of one (1) year. • AMX lighting products are guaranteed to switch on and off any load that is properly connected to our lighting products, as long as the AMX lighting products are under warranty. AMX also guarantees the control of dimmable loads that are properly connected to our lighting products. The dimming performance or quality there of is not guaranteed, impart due to the random combinations of dimmers, lamps and ballasts or transformers. • AMX software is warranted for a period of ninety (90) days. • Batteries and incandescent lamps are not covered under the warranty. • AMX AutoPatch Epica, Modula, Modula Series4, Modula CatPro Series and 8Y-3000 product models will be free of defects in materials and manufacture at the time of sale and will remain in good working order for a period of three (3) years following the date of the original sales invoice from AMX. The three-year warranty period will be extended to the life of the product (Limited Lifetime Warranty) if the warranty card is filled out by the dealer and/or end user and returned to AMX so that AMX receives it within thirty (30) days of the installation of equipment but no later than six (6) months from original AMX sales invoice date. The life of the product extends until five (5) years after AMX ceases manufacturing the product model. The Limited Lifetime Warranty applies to products in their original installation only. If a product is moved to a different installation, the Limited Lifetime Warranty will no longer apply, and the product warranty will instead be the three (3) year Limited Warranty. All products returned to AMX require a Return Material Authorization (RMA) number. The RMA number is obtained from the AMX RMA Department. The RMA number must be clearly marked on the outside of each box. The RMA is valid for a 30-day period. After the 30-day period the RMA will be cancelled. Any shipments received not consistent with the RMA, or after the RMA is cancelled, will be refused. AMX is not responsible for products returned without a valid RMA number. AMX is not liable for any damages caused by its products or for the failure of its products to perform. This includes any lost profits, lost savings, incidental damages, or consequential damages. AMX is not liable for any claim made by a third party or by an AMX Authorized Partner for a third party. This Limited Warranty does not apply to (a) any AMX product that has been modified, altered or repaired by an unauthorized agent or improperly transported, stored, installed, used, or maintained; (b) damage caused by acts of nature, including flood, erosion, or earthquake; (c) damage caused by a sustained low or high voltage situation or by a low or high voltage disturbance, including brownouts, sags, spikes, or power outages; or (d) damage caused by war, vandalism, theft, depletion, or obsolescence. This limitation of liability applies whether damages are sought, or a claim is made, under this warranty or as a tort claim (including negligence and strict product liability), a contract claim, or any other claim. This limitation of liability cannot be waived or amended by any person. This limitation of liability will be effective even if AMX or an authorized representative of AMX has been advised of the possibility of any such damages. This limitation of liability, however, will not apply to claims for personal injury. Some states do not allow a limitation of how long an implied warranty last. Some states do not allow the limitation or exclusion of incidental or consequential damages for consumer products. In such states, the limitation or exclusion of the Limited Warranty may not apply. This Limited Warranty gives the owner specific legal rights. The owner may also have other rights that vary from state to state. The owner is advised to consult applicable state laws for full determination of rights. EXCEPT AS EXPRESSLY SET FORTH IN THIS WARRANTY, AMX MAKES NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. AMX EXPRESSLY DISCLAIMS ALL WARRANTIES NOT STATED IN THIS LIMITED WARRANTY. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW ARE LIMITED TO THE TERMS OF THIS LIMITED WARRANTY. EXCEPT AS OTHERWISE LIMITED BY APPLICABLE LAW, AMX RESERVES THE RIGHT TO MODIFY OR DISCONTINUE DESIGNS, SPECIFICATIONS, WARRANTIES, PRICES, AND POLICIES WITHOUT NOTICE. AMX Software License and Warranty Agreement • LICENSE GRANT. AMX grants to Licensee the non-exclusive right to use the AMX Software in the manner described in this License. The AMX Software is licensed, not sold. This license does not grant Licensee the right to create derivative works of the AMX Software. The AMX Software consists of generally available programming and development software, product documentation, sample applications, tools and utilities, and miscellaneous technical information. Please refer to the README.TXT file on the compact disc or download for further information regarding the components of the AMX Software. The AMX Software is subject to restrictions on distribution described in this License Agreement. AMX Dealer, Distributor, VIP or other AMX authorized entity shall not, and shall not permit any other person to, disclose, display, loan, publish, transfer (whether by sale, assignment, exchange, gift, operation of law or otherwise), license, sublicense, copy, or otherwise disseminate the AMX Software. Licensee may not reverse engineer, decompile, or disassemble the AMX Software. • ACKNOWLEDGEMENT. You hereby acknowledge that you are an authorized AMX dealer, distributor, VIP or other AMX authorized entity in good standing and have the right to enter into and be bound by the terms of this Agreement. • INTELLECTUAL PROPERTY. The AMX Software is owned by AMX and is protected by United States copyright laws, patent laws, international treaty provisions, and/or state of Texas trade secret laws. Licensee may make copies of the AMX Software solely for backup or archival purposes. Licensee may not copy the written materials accompanying the AMX Software. • TERMINATION. AMX RESERVES THE RIGHT, IN ITS SOLE DISCRETION, TO TERMINATE THIS LICENSE FOR ANY REASON UPON WRITTEN NOTICE TO LICENSEE. In the event that AMX terminates this License, the Licensee shall return or destroy all originals and copies of the AMX Software to AMX and certify in writing that all originals and copies have been returned or destroyed. • PRE-RELEASE CODE. Portions of the AMX Software may, from time to time, as identified in the AMX Software, include PRERELEASE CODE and such code may not be at the level of performance, compatibility and functionality of the GA code. The PRE-RELEASE CODE may not operate correctly and may be substantially modified prior to final release or certain features may not be generally released. AMX is not obligated to make or support any PRE-RELEASE CODE. ALL PRE-RELEASE CODE IS PROVIDED "AS IS" WITH NO WARRANTIES. • LIMITED WARRANTY. AMX warrants that the AMX Software (other than pre-release code) will perform substantially in accordance with the accompanying written materials for a period of ninety (90) days from the date of receipt. AMX DISCLAIMS ALL OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WITH REGARD TO THE AMX SOFTWARE. THIS LIMITED WARRANTY GIVES LICENSEE SPECIFIC LEGAL RIGHTS. Any supplements or updates to the AMX SOFTWARE, including without limitation, any (if any) service packs or hot fixes provided to Licensee after the expiration of the ninety (90) day Limited Warranty period are not covered by any warranty or condition, express, implied or statutory. • LICENSEE REMEDIES. AMX's entire liability and Licensee's exclusive remedy shall be repair or replacement of the AMX Software that does not meet AMX's Limited Warranty and which is returned to AMX in accordance with AMX's current return policy. This Limited Warranty is void if failure of the AMX Software has resulted from accident, abuse, or misapplication. Any replacement AMX Software will be warranted for the remainder of the original warranty period or thirty (30) days, whichever is longer. Outside the United States, these remedies may not available. NO LIABILITY FOR CONSEQUENTIAL DAMAGES. IN NO EVENT SHALL AMX BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR ANY OTHER PECUNIARY LOSS) ARISING OUT OF THE USE OF OR INABILITY TO USE THIS AMX SOFTWARE, EVEN IF AMX HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. BECAUSE SOME STATES/COUNTRIES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE LIMITATION MAY NOT APPLY TO LICENSEE. • U.S. GOVERNMENT RESTRICTED RIGHTS. The AMX Software is provided with RESTRICTED RIGHTS. Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph ©(1)(ii) of The Rights in Technical Data and Computer Software clause at DFARS 252.227-7013 or subparagraphs ©(1) and (2) of the Commercial Computer Software Restricted Rights at 48 CFR 52.227-19, as applicable. • SOFTWARE AND OTHER MATERIALS FROM AMX.COM MAY BE SUBJECT TO EXPORT CONTROL. The United States Export Control laws prohibit the export of certain technical data and software to certain territories. No software from this Site may be downloaded or exported (i) into (or to a national or resident of) Cuba, Iraq, Libya, North Korea, Iran, Syria, or any other country to which the United States has embargoed goods; or (ii) anyone on the United States Treasury Department's list of Specially Designated Nationals or the U.S. Commerce Department's Table of Deny Orders. AMX does not authorize the downloading or exporting of any software or technical data from this site to any jurisdiction prohibited by the United States Export Laws. This Agreement replaces and supersedes all previous AMX Software License Agreements and is governed by the laws of the State of Texas, and all disputes will be resolved in the courts in Collin County, Texas, USA. For any questions concerning this Agreement, or to contact AMX for any reason, please write: AMX License and Warranty Department, 3000 Research Drive, Richardson, TX 75082. FCC and IC Information This device complies with Part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received; including interference that may cause undesired operation. Modifications to this product, unless expressly approved by AMX, could void the user’s authority to operate the equipment. Cet appareil est conforme avec Industrie Canada RSS standard exempts de licence (s). Son utilisation est soumise à Les deux conditions suivantes: (1) cet appareil ne peut pas provoquer d'interférences et (2) cet appareil doit accepter Toute interférence, y compris les interférences qui peuvent causer un mauvais fonctionnement du dispositif. This device complies with Health Canada's Safety Code 6 / IC RSS-210. The installer of this device should ensure that RF radiation is not emitted in excess of the Health Canada's requirement. Information can be obtained at: http://www.hc-sc.gc.ca/ewh-semt/pubs/radiation/radio_guidelignes_direct-eng.php Cet appareil est conforme avec Santé Canada Code de sécurité 6 / IC RSS-210. Le programme d'installation de cet appareil doit s'assurer que les rayonnements RF n'est pas émis au-delà de l'exigence de Santé Canada. Les informations peuvent être obtenues: http://www.hc-sc.gc.ca/ewhsemt/ pubs/radiation/radio_guide-lignes_direct-eng.php Federal Communications Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. FCC RF Radiation Exposure Statement This product has been evaluated and found to comply with the limits established by the FCC, Industry Canada and other international standards for radio frequency exposure when used as described in this manual. The use of accessories not described may not ensure compliance with these limits. Indoor Use This device is intended for indoor use only. WiFi operation in the 5150-5250 MHz range is only for indoor usage to reduce potential for harmful interference to co-channel mobile satellite systems. Dans la gamme de fréquences 5150 - 5250MHz, cet appareil est exclusivement destiné à un usage en intérieur afin de réduire les risques potentiels d'interférences avec les systèmes de communications satellites partageant les mêmes canaux. Table of Contents Introduction ........................................................................................................1 Overview .................................................................................................................. 1 Common Application....................................................................................................... 1 Features .......................................................................................................................... 1 Memory .................................................................................................................... 4 Connector Locations ................................................................................................. 4 Basic Operation ........................................................................................................ 4 Powering on the MVP-9000i ..................................................................................... 5 Intercom Microphone ............................................................................................... 5 Stylus ........................................................................................................................ 5 Kick Stand................................................................................................................. 5 Audio/Video Capabilities .......................................................................................... 5 Power Management.................................................................................................. 5 Cleaning the Touch Overlay and Case ...................................................................... 6 Picture View.............................................................................................................. 6 Preview Mode and Normal Mode ................................................................................... 7 Picture View Send Command .......................................................................................... 7 Seamless Wireless to Wired Swap ............................................................................ 8 Accessories .......................................................................................................11 Table Docking Station............................................................................................. 11 Powering the MVP-TDS-9.............................................................................................. 12 Recharging .................................................................................................................... 13 Using the USB ports ...................................................................................................... 13 Undocking the Touch Panel........................................................................................... 13 Cleaning the MVP-TDS-9 ............................................................................................... 13 Wall Docking Station .............................................................................................. 14 Unlocking the Touch Panel ..................................................................................... 15 Recharging.............................................................................................................. 16 Installing the MVP-WDS-9....................................................................................... 17 Installing the Wall Docking Station and Plastic Back Box .............................................. 17 Installing the Optional Metal Rough-In Box ............................................................ 20 Pre-Wall Installation of the CB-MVP-WDS9 ................................................................... 20 Other MVP-WDS-9 installations .................................................................................... 21 Undocking from the MVP-TDS-9 or MVP-WDS-9 .................................................... 22 Configuring Communication .............................................................................25 Overview ................................................................................................................ 25 MVP-9000i Modero® Wireless Touch Panel with Intercom IR Communication ................................................................................................... 26 Modero Setup and System Settings ....................................................................... 26 Accessing the Setup and Protected Setup Pages.......................................................... 26 Setting the Panel’s Device Number............................................................................... 27 Wireless Settings - Wireless Access Overview ........................................................ 28 DHCP............................................................................................................................. 28 Configuring Wireless Network Access .................................................................... 28 Step 1: Configure the Device’s WiFi Settings ......................................................... 28 Wireless communication using a DHCP Address ........................................................... 28 Wireless Communication Using a Static IP Address....................................................... 29 Using the Wireless Site Survey Tool .............................................................................. 30 Step 2: Configure the Card’s Wireless Security Settings ........................................ 32 Configuring the Device’s Wireless Card for Secured access to a WPA-PSK-Secured AP 32 Step 3: Choose a Master Connection Mode ........................................................... 33 Ethernet Over USB ................................................................................................. 34 Touch Panel Setup......................................................................................................... 34 Configure a Virtual NetLinx Master using NetLinx Studio ............................................. 37 Ethernet ........................................................................................................................ 38 Master Connection to a Virtual Master via Ethernet ..................................................... 39 Using G4 Web Control to Interact with a G4 Panel ................................................ 42 Using the NetLinx Master To Control the G4 Panel................................................ 43 Setup Pages ......................................................................................................47 Overview ................................................................................................................ 47 Accessing the Setup pages ..................................................................................... 47 Landscape and Portrait Mode Setup Pages ............................................................ 47 Setup Page ............................................................................................................. 48 Navigation Buttons........................................................................................................ 49 Display Page ........................................................................................................... 50 Audio Page ............................................................................................................. 51 WAV files - Supported Sample Rates ............................................................................ 52 Power Management Page....................................................................................... 53 Date/Time Page ...................................................................................................... 55 Panel Information Page........................................................................................... 57 Panel Information Page - Info ........................................................................................ 57 Panel Information Page - Config.................................................................................... 58 Panel Information Page - File ........................................................................................ 59 Panel Information Page - Project ................................................................................... 60 Protected Setup Pages .....................................................................................63 Zero-Configuration Networking.............................................................................. 64 MVP-9000i Modero® Wireless Touch Panel with Intercom Zero-Configuration Client ............................................................................................. 64 Accessing the MVP-9000i via Zero-Configuration ......................................................... 65 Enabling and Disabling Zero-Configuration Capability ................................................. 65 System & Panel Options page ................................................................................ 66 Function Show Example ................................................................................................ 67 Security Settings ........................................................................................................... 68 Installing Firmware ........................................................................................................ 69 System Settings Page ............................................................................................. 70 System Settings - Master .............................................................................................. 70 System Settings - Wired ................................................................................................ 72 System Settings - WiFi .................................................................................................. 73 Security Modes ....................................................................................................... 76 Open ............................................................................................................................. 76 WEP .............................................................................................................................. 77 WPA-PSK....................................................................................................................... 79 EAP Security & Server Certificates - Overview ....................................................... 81 EAP-LEAP ...................................................................................................................... 82 EAP-FAST ...................................................................................................................... 84 EAP-PEAP...................................................................................................................... 86 EAP-TTLS....................................................................................................................... 88 EAP-TLS......................................................................................................................... 90 Client Certificate Configuration .................................................................................... 92 System Settings - USB ................................................................................................... 93 Calibrate Page ........................................................................................................ 94 G4 Web Control Settings Page............................................................................... 95 Passwords ............................................................................................................... 97 Panel Logs Page ..................................................................................................... 99 Cache Settings Page ............................................................................................. 100 Panel Statistics Page ............................................................................................. 102 Panel Statistics - ICSP .................................................................................................. 102 Panel Statistics - Blinks Tab ......................................................................................... 103 Panel Statistics - IP Tab ............................................................................................... 104 Panel Statistics - Wireless Tab ..................................................................................... 104 Connection Utility Page .............................................................................................. 105 SIP Settings Page.................................................................................................. 106 Upgrading Firmware ......................................................................................109 Overview .............................................................................................................. 109 Upgrading Firmware via USB stick or MicroSD card ............................................. 109 Upgrading from Previous Firmware...................................................................... 112 MVP-9000i Modero® Wireless Touch Panel with Intercom Upgrading Firmware Via NetLinx Studio .............................................................. 113 Step 3: Confirm and Upgrade the firmware via the USB port ..................................... 114 A Special Note for Network Interface Connections .............................................. 118 Reverting the MVP-9000i to Factory Default Firmware ........................................ 121 Programming ..................................................................................................125 Overview .............................................................................................................. 125 Animated Transitions ............................................................................................ 125 ^AFP 126 Touch Gesture Recognition................................................................................... 127 Gesture Velocity.......................................................................................................... 127 Gesture Prioritization .................................................................................................. 127 Gesture VNC/Mouse Support...................................................................................... 128 Gesture Custom Event ................................................................................................ 128 Enabling or Disabling the Gesture Custom Event ....................................................... 128 ^GCE 128 .............................................................................................................................. 128 Page Commands ................................................................................................... 129 @APG...................................................................................................................................... @CPG ...................................................................................................................................... @DPG...................................................................................................................................... @PDR ...................................................................................................................................... @PHE ...................................................................................................................................... @PHP ...................................................................................................................................... @PHT ...................................................................................................................................... @PPA ...................................................................................................................................... @PPF....................................................................................................................................... @PPG ...................................................................................................................................... @PPK ...................................................................................................................................... @PPM...................................................................................................................................... @PPN ...................................................................................................................................... @PPT....................................................................................................................................... @PPX ...................................................................................................................................... @PSE ....................................................................................................................................... @PSP ....................................................................................................................................... @PST ....................................................................................................................................... PAGE ...................................................................................................................................... PPOF....................................................................................................................................... PPOG ...................................................................................................................................... PPON ...................................................................................................................................... 129 129 129 129 129 130 130 130 130 131 131 131 131 132 132 132 132 132 132 133 133 133 Programming Numbers......................................................................................... 134 RGB Triplets and Names For Basic 88 Colors ............................................................. 134 Font Styles And Id Numbers ....................................................................................... 136 Border Styles And Programming Numbers ................................................................. 136 "^" Button Commands ......................................................................................... 138 MVP-9000i Modero® Wireless Touch Panel with Intercom ^ANI........................................................................................................................................ ^APF ....................................................................................................................................... ^BAT ....................................................................................................................................... ^BAU....................................................................................................................................... ^BCB ....................................................................................................................................... ^BCF ....................................................................................................................................... ^BCT ....................................................................................................................................... ^BDO ...................................................................................................................................... ^BFB........................................................................................................................................ ^BIM........................................................................................................................................ ^BLN ....................................................................................................................................... ^BMC ...................................................................................................................................... ^BMF....................................................................................................................................... ^BMI........................................................................................................................................ ^BML....................................................................................................................................... ^BMP ...................................................................................................................................... ^BNC....................................................................................................................................... ^BNN ...................................................................................................................................... ^BNT ....................................................................................................................................... ^BOP....................................................................................................................................... ^BOR....................................................................................................................................... ^BOS ....................................................................................................................................... ^BPP........................................................................................................................................ ^BRD ....................................................................................................................................... ^BSF........................................................................................................................................ ^BSM....................................................................................................................................... ^BSO ....................................................................................................................................... ^BVL........................................................................................................................................ ^BVN....................................................................................................................................... ^BVP ....................................................................................................................................... ^BVT ....................................................................................................................................... ^BWW ..................................................................................................................................... ^CPF........................................................................................................................................ ^DLD ....................................................................................................................................... ^DPF ....................................................................................................................................... ^ENA....................................................................................................................................... ^FON ...................................................................................................................................... ^GDI........................................................................................................................................ ^GIV ........................................................................................................................................ ^GLH ....................................................................................................................................... ^GLL........................................................................................................................................ ^GRD....................................................................................................................................... ^GRU....................................................................................................................................... ^GSC ....................................................................................................................................... ^GSN....................................................................................................................................... ^ICO........................................................................................................................................ ^IRM........................................................................................................................................ ^JSB ........................................................................................................................................ ^JSI ......................................................................................................................................... ^JST ........................................................................................................................................ MVP-9000i Modero® Wireless Touch Panel with Intercom 138 138 139 139 139 140 140 140 141 141 141 142 143 144 144 145 145 145 145 145 146 146 146 146 147 147 147 147 147 148 148 148 148 148 149 149 149 150 150 150 150 150 151 151 151 151 152 152 152 153 ^MBT ...................................................................................................................................... ^MDC ..................................................................................................................................... ^PIC ........................................................................................................................................ ^SHO ...................................................................................................................................... ^TEC ....................................................................................................................................... ^TEF ....................................................................................................................................... ^TXT ....................................................................................................................................... ^UNI ....................................................................................................................................... ^WLD...................................................................................................................................... 153 153 153 153 154 154 154 155 155 Miscellaneous MVP Strings.......................................................................................... 156 undock-........................................................................................................................ UNDOCKED ............................................................................................................................ SWAP ...................................................................................................................................... dock ........................................................................................................................................ 156 156 156 156 MVP Panel Lock Passcode Commands ........................................................................ 157 ^LPC ....................................................................................................................................... 157 ^LPR ....................................................................................................................................... 157 ^LPS........................................................................................................................................ 157 Text Effects Names ............................................................................................... 158 Button Query Commands ..................................................................................... 158 ?BCB ....................................................................................................................................... ?BCF ....................................................................................................................................... ?BCT ....................................................................................................................................... ?BMP ...................................................................................................................................... ?BOP....................................................................................................................................... ?BRD ....................................................................................................................................... ?BWW ..................................................................................................................................... ?FON ...................................................................................................................................... ?ICO........................................................................................................................................ ?JSB ........................................................................................................................................ ?JSI ......................................................................................................................................... ?JST ........................................................................................................................................ ?TEC........................................................................................................................................ ?TEF ........................................................................................................................................ ?TXT........................................................................................................................................ 159 160 160 161 161 162 162 163 163 164 164 165 165 166 166 Panel Runtime Operations .................................................................................... 167 ABEEP..................................................................................................................................... ADBEEP .................................................................................................................................. @AKB ...................................................................................................................................... AKEYB .................................................................................................................................... AKEYP..................................................................................................................................... AKEYR..................................................................................................................................... @AKP ...................................................................................................................................... @AKR ...................................................................................................................................... BEEP ....................................................................................................................................... BRIT ........................................................................................................................................ @BRT....................................................................................................................................... DBEEP..................................................................................................................................... 167 167 167 167 167 167 168 168 168 168 168 168 MVP-9000i Modero® Wireless Touch Panel with Intercom @EKP ....................................................................................................................................... PKEYP ..................................................................................................................................... @PKP ....................................................................................................................................... SETUP...................................................................................................................................... SHUTDOWN ............................................................................................................................ SLEEP ...................................................................................................................................... @SOU ...................................................................................................................................... @TKP ....................................................................................................................................... TPAGEON ............................................................................................................................... TPAGEOFF .............................................................................................................................. @VKB....................................................................................................................................... WAKE ...................................................................................................................................... 168 169 169 169 169 169 169 170 170 170 170 170 Input Commands................................................................................................... 171 ^CAL ....................................................................................................................................... 171 ^KPS........................................................................................................................................ 171 ^VKS ....................................................................................................................................... 171 Embedded codes .................................................................................................. 172 Panel Setup Commands ........................................................................................ 173 @PWD ..................................................................................................................................... 173 ^PWD ...................................................................................................................................... 173 Dynamic Image Commands................................................................................... 174 ^BBR ....................................................................................................................................... 174 ^RAF ....................................................................................................................................... 174 ^RFR 174 ^RAF, ^RMF - Embedded Codes ................................................................................ 175 ^RMF 175 ^RSR 175 Escape Sequences ....................................................................................................... 176 $DV ......................................................................................................................................... $SY .......................................................................................................................................... $IP ........................................................................................................................................... $HN ......................................................................................................................................... $MC......................................................................................................................................... $ID........................................................................................................................................... $PX.......................................................................................................................................... $PY .......................................................................................................................................... $ST .......................................................................................................................................... $AC ......................................................................................................................................... $AP.......................................................................................................................................... $CC ......................................................................................................................................... $CP.......................................................................................................................................... $LC .......................................................................................................................................... $LP .......................................................................................................................................... $BX.......................................................................................................................................... $BY.......................................................................................................................................... $BN ......................................................................................................................................... 176 176 176 176 176 176 176 176 176 176 176 176 176 176 176 176 176 176 Intercom Commands............................................................................................. 177 ^MODEL?................................................................................................................................ 177 MVP-9000i Modero® Wireless Touch Panel with Intercom ^ICS- ....................................................................................................................................... ^ICE' ....................................................................................................................................... ^ICM-TALK ............................................................................................................................. ^ICM-LISTEN........................................................................................................................... ^ICM-MICLEVEL...................................................................................................................... ^ICM-MUTEMIC ...................................................................................................................... ^ICM-SPEAKERLEVEL ............................................................................................................. 177 177 178 178 178 178 178 SIP Commands ...................................................................................................... 179 ^PHN-AUTOANSWER ............................................................................................................. ^PHN-CALL............................................................................................................................. ^PHN-DECLINE....................................................................................................................... ^PHN-INCOMING ................................................................................................................... ^PHN-LINESTATE ................................................................................................................... ^PHN-ANSWER ...................................................................................................................... ^PHN-AUTOANSWER ............................................................................................................. ^PHN-MSGWAITING .............................................................................................................. ^PHN-PRIVACY....................................................................................................................... ^PHN-REDIAL ......................................................................................................................... ^PHN-TRANSFERRED ............................................................................................................. ?PHN-AUTOANSWER ............................................................................................................. ^PHN-CALL............................................................................................................................. ^PHN-DTMF ........................................................................................................................... ^PHN-HANGUP ...................................................................................................................... ^PHN-HOLD ........................................................................................................................... ?PHN-LINESTATE.................................................................................................................... ^PHN-PRIVACY....................................................................................................................... ?PHN-PRIVACY ....................................................................................................................... ^PHN-REDIAL ......................................................................................................................... ^PHN-SETUP-DOMAIN ........................................................................................................... ^PHN-SETUP-ENABLE ............................................................................................................ ^PHN-SETUP-PASSWORD ...................................................................................................... ^PHN-SETUP-PORT................................................................................................................. ^PHN-SETUP-PROXYADDR .................................................................................................... ^PHN-SETUP-STUNADDR....................................................................................................... ^PHN-SETUP-USERNAME....................................................................................................... ^PHN-TRANSFER.................................................................................................................... 179 179 179 179 179 180 180 180 180 180 180 181 181 181 181 181 181 181 181 181 182 182 182 182 182 182 182 182 Battery Life and Replacement ........................................................................183 Overview .............................................................................................................. 183 IMPORTANT NOTES! ............................................................................................ 184 Power Management.............................................................................................. 185 Proper Battery Maintenance ................................................................................. 185 Battery Replacement ............................................................................................ 186 READ THESE INSTRUCTIONS FIRST!........................................................................... 186 Replacing the Battery ........................................................................................... 186 Remove the old battery .............................................................................................. 188 Installing the new battery............................................................................................ 188 MVP-9000i Modero® Wireless Touch Panel with Intercom Reconnecting the battery to the device ...................................................................... 188 Appendix A: Text Formatting .........................................................................191 Text Formatting Codes for Bargraphs/Joysticks................................................... 191 Text Area Input Masking....................................................................................... 192 Input mask character types ......................................................................................... 192 Input Mask Ranges ...................................................................................................... 193 Input mask next field characters ................................................................................. 193 Input mask operations................................................................................................. 193 Input mask literals ....................................................................................................... 193 Input mask output examples ....................................................................................... 194 URL Resources ...................................................................................................... 194 Special Escape Sequences........................................................................................... 194 Appendix B: Wireless Technology ..................................................................197 Overview of Wireless Technology......................................................................... 197 Terminology.......................................................................................................... 198 802.1x ......................................................................................................................... 198 AES ............................................................................................................................. 198 CERTIFICATES (CA) ..................................................................................................... 198 MIC.............................................................................................................................. 198 TKIP............................................................................................................................. 198 WEP ............................................................................................................................ 198 WPA ............................................................................................................................ 198 WPA2 .......................................................................................................................... 199 EAP Authentication............................................................................................... 200 EAP Characteristics ..................................................................................................... 200 EAP Communication Overview.................................................................................... 201 Configuring Modero Firmware via the USB Port .................................................. 202 Step 1: Configure The Panel For a USB Connection Type ........................................... 202 Step 2: Prepare NetLinx Studio For Communication Via the USB Port ....................... 202 AMX Certificate Upload Utility ............................................................................. 203 Uploading a Certificate File .................................................................................. 203 Appendix C: Troubleshooting ........................................................................205 Overview .............................................................................................................. 205 Panel Doesn’t Respond To Touches ............................................................................ 205 Battery Will Not Hold Or Take A Charge .................................................................... 205 MVP-9000i Isn’t Appearing In The Online Tree Tab .................................................... 205 MVP Can’t Obtain a DHCP Address ............................................................................ 206 My AP Doesn’t Seem To Be Working .......................................................................... 206 NetLinx Studio Only Detects One Of My Connected Masters .................................... 206 MVP-9000i Modero® Wireless Touch Panel with Intercom Can’t Connect To a NetLinx Master ............................................................................ 206 Only One Modero Panel In My System Shows Up ....................................................... 206 Panel Behaves Strangely After Downloading A Panel File Or Firmware ..................... 207 10 MVP-9000i Modero® Wireless Touch Panel with Intercom Introduction Introduction Overview The MVP-9000i redefines touch panel control offering both wireless and wired functionality, new user interface capabilities like gestures and animated page transitions, a stunning 9" widescreen 24-bit color display, full digital duplex VoIP telephone or intercom interface and built-in 802.11a/b/g WiFi card with antenna diversity. The MVP-9000i switches seamlessly to wireless mode when removed from either the MVPTDS-9 Table Docking Station or the MVP-WDS-9 Wall Docking Station. Transfer touch panel pages, upgrade the firmware or display photo files using the USB or micro-SD card slot. Available in black (FG5967-01) and white (FG5967-02), the MVP-9000i also features a capacitive touch directional pad, 4 programmable buttons, and over 1 GB of usable flash memory. The MVP-9000i also supports 5 hours of continuous use to three days of standby time. Microphone Touch screen Status LED Speaker grille FIG. 1 MVP-9000i-GB touch panel Common Application The MVP-9000i is ideal for a wide variety of residential and commercial control and automation applications where flexibility of docked with wired Ethernet or undocked with 802.11a/b/g functionality is desired. This is an option for extremely noisy wireless environments such as multiple dwelling units, as well as applications that require telephone/intercom functionality. Features Available in your choice of black or white Capacitive touch buttons provide simple (up/down) or sophisticated control (up/down, right/left, select) VoIP Intercom and SIP Telephone (requires AMX SIP Gateway) Ready 802.11a/b/g WiFi for two-way network communications Wireless communications remain secure using WPA, WPA2, EAP-PEAP, EAP-FAST, EAP-LEAP, EAP-TLS, and EAP-TTLS network security standards Enhanced usability with microphone and speakers Versatile placement options, including an integrated kickstand and the optional MVP-TDS-9 Table Docking Station and MVP-WDS-9 Wall Docking Station MVP-9000i Modero® Wireless Touch Panel with Intercom Introduction The MVP-9000i comes with an integrated rear “kickstand”, allowing it to be used and displayed away from a Docking Station (FIG. 2). It also comes with a pre-installed 802.11a/b/g wireless card. Stylus Capacitive touch directional pad Capacitive touch buttons (4) Kickstand MicroSD memory card slot Speaker Mini-USB port Docking Station interface connector DC power jack FIG. 2 MVP-9000i side view (with kickstand) MVP-9000i Specifications Models Available: • MVP-9000i-GB (Black - FG5967-01) Dimensions: • 7.62” x 10.98” x 1.06" (19.35 cm x 27.89 cm x 2.69 cm) Weight: • 3.60 lbs (1.63 kg) • MVP-9000i-GW (White - FG5967-02) Enclosure: MVP-9000i-GB: Black plastic with brushed metal retaining ring. MVP-9000i-GW: White plastic with brushed metal retaining ring. Memory: • 2GB internal microSD (1.1GB accessible to user) Power Requirements (Without Charging): • Constant current draw: 1.1 A @ 12 VDC • Startup current draw: 1.2 A @ 12 VDC • If panel is mounted onto a TDS or WDS, add 0.1 A to the above figures. Power Requirements (While Charging): Panel while charging battery: • Constant current draw: 2.0 A @ 12VDC • If panel is mounted onto a TDS or WDS, add 0.1 A to the above figures. Minimum Power Supply Required: • PS3.0 Power Supply (FG423-30) (included) Power Modes: • ON: All necessary modules are powered up and device remains online with the NetLinx Master. • PS-POE-AT High Power PoE Injector (FG423-81) through the Table Docking Station and Wall Docking Station • SLEEP: Only the backlight will be turned off after the user selectable time of inactivity has elapsed. Panel resumes the ON mode immediately after being touched. • STANDBY: Power to all components other than the touch screen is turned off after the user selectable time of inactivity has elapsed. Device will turn back on by touching the screen. Re-acquiring an AP connection may require up to 25 seconds. (Standby Mode does not apply if a USB or microSD card is connected to the device. For more information, please refer to the Picture View section on page 6.) • SHUTDOWN: Power to all peripherals and components is turned off. The system remains in this mode until it is restarted by applying power or touching the screen. Battery Duration: • On (continuous use): 5 hours; Standby: 3 days • 10 hours of normal use, in a combination of On, Sleep, Standby, and Shutdown. • 3 days of standby use MVP-9000i Modero® Wireless Touch Panel with Intercom Introduction MVP-9000i Specifications (Cont.) Panel LCD Parameters: • Screen resolution: 800 x 480 pixels (HV) @ 60 Hz refresh rate • Aspect ratio: 16 x 9 • Brightness (luminance): 400 cd/m2 • Channel transparency: 8-bit Alpha blending • Contrast ratio: 900:1 max. • Display colors: 16.7M colors (24-bit color depth) • Dot/pixel pitch: 0.246 mm • Panel type: TFT Color Active-Matrix (IPS technology) • Viewing angles: Vertical: + 85° (up from center) and - 85° (down from center) Horizontal: + 85° (left from center) and - 85° (right from center) External Components Stylus Slot: Slot where the included stylus is stored, located on the left side of the device. MicroSD Card Slot: Slot for insertion of standard MicroSD memory cards. Mini-USB Connector: 5-pin Mini-USB connector used for audio output to USB headphones, programming, firmware updates, and touch panel file transfer between the PC and the target panel. Note: When connecting the panel to PC using a CC-USB (or compatible) cable, be sure to power the panel On before attempting to connect the USB cable from the PC to the mini-USB port on the panel. DC power port: 2.5 mm port to power the panel away from a Docking Station. Microphone: For use with the intercom feature and for calls using SIP. • Frequency: 20 to 160,000 Hz • S/N Ratio: More than 58 dB Speaker: • 4 Ohm Audio Standards: • G.711 sound standard • 2 Watts 300Hz cutoff frequency • 75dB SPL@1m IR Emitters: Transmit IR (transmit only) over 20 feet (6.10 m) from the panel. • IR emitters on G4 panels share the device address number of the panel. • Transmits AMX fixed frequencies at 38KHz and 455KHz and third-party user-programmable frequencies from 20KHz to 1.5MHz Certifications: • FCC Class B • CE • IC • VCCI • C-Tick Operating/Storage Environment • Operating Temperature: 0° C (32° F) to 40° C (104° F) • Battery Charging Temperature: 0° C (32° F) to 30° C (86° F) • Operating & Battery Charging Humidity: 20% to 85% RH • Storage Temperature: -10° C (-14° F) to 60° C (140° F) • Storage Humidity: 5% - 85% RH Included Accessories: • MVP-9000i Installation Guide (93-5967-01) • PS3.0 Power Supply (FG423-30) • Stylus (pre-installed onto the left side of the unit) MVP-9000i Modero® Wireless Touch Panel with Intercom Introduction MVP-9000i Specifications (Cont.) Other AMX Equipment: • MVP-TDS-9-GB Black Table Docking Station (FG5967-10) • MVP-TDS-9-GW White Table Docking Station (FG5967-11) • MVP-WDS-9-GB Black Wall Docking Station (FG5967-12) • MVP-WDS-9-GW White Wall Docking Station (FG5967-13) • CC-MINIUSB Mini USB to PC Cable Adapter (FG5967-20) • MicroSD card - 2GB (FG2116-80) • MicroSD card - 4GB (FG2116-81) • MVP-BP-9 Replacement Battery Pack (FG5967-21) • PS-POE-AT High Power PoE Injector (FG423-81) • MVP-STYLUS-52-XX Replacement Stylus, pack of 3 (Black: FG5966-21; White: FG5966-22) This device complies with FCC Part 15 and Industry Canada RSS 210 subject to the following conditions: 1. This device must not cause harmful interference and 2. This device must accept all interference, including interference that interferes with the operation of this device. Memory The MVP-9000i comes with 2GB internal MicroSD memory,1.1GB of which is accessible to the user. This memory may not be upgraded. Connector Locations With the unit facing you, the mini-USB port (for programming and downloading firmware and the DC power port are located on the lower left side of the device (FIG. 2). The connector for the Table Docking Station (please refer to the Table Docking Station section on page 11) is located on the bottom of the device. Although firmware upgrades can be conducted over a wireless Ethernet connection, transferring firmware KIT files over a wired LAN, USB data stick, or USB flash card is recommended, and only when the panel is connected to a power supply. If battery power is below 30 percent, and the touch panel is not connected to a power supply, the download will not be completed. In addition to its speaker, the MVP-9000i also utilizes its mini-USB port as a connector for standard headphones or headsets. These headphones must use a mini-USB plug or adaptor in order to utilize this feature. While standard input/output headsets may be used in lieu of headphones, the headset may only be used for output. While you may receive sound from the headset, its microphone will not function. Always use the MVP-9000i’s microphone for receiving sound. Basic Operation The MVP-9000i is operated using its integral touchscreen, as well as the capacitive touch buttons on the left and the directional pad on the right side of the device (FIG. 1). If the device has gone into its Sleep or Standby Modes, a button press will awaken the device from Sleep Mode, but touching the screen is the only way to wake it from Standby Mode. The MVP-9000i device’s power use allows up to 72 hours of use between rechargings of its internal battery, but its battery charge lasts up to one month if the device goes into Shutdown Mode during that time. The device may be placed in its charging cradle at any time and operated within its cradle, making a wired Ethernet connection in the process. If shut down, the device will power up when placed in a Table Docking Station or Wall Docking Station, or when external power is applied via the PS3.0 Power Supply. If the device is in Standby Mode, the device will not turn on if its side buttons or directional pad are touched or the device is docked. Touching the screen is the only way to wake an MVP-9000i from Standby Mode. MVP-9000i Modero® Wireless Touch Panel with Intercom Introduction Any wired connection intended for the device will be reconnected within approximately twenty seconds after the device is placed in a Table Docking Station or Wall Docking Station. Depending upon its settings, the device may be set to go into On Mode as soon as it is placed in the Docking Station. Powering on the MVP-9000i The MVP-9000i may be powered on by touching and holding the touchscreen. If the device was in Sleep Mode, it will automatically turn on when put into a Table or Wall Docking Station. Intercom Microphone The MVP-9000i contains a built-in microphone above the upper lefthand corner of the touch screen for video and audio conferencing capabilities. This microphone is concealed by the casing. Stylus The MVP-9000i comes with a unique touchscreen stylus that slides into a storage groove on the left side of the device when not in use. Replacement styluses may be ordered in a 3-pack (black, FG5966-21; white, FG596622) from www.amx.com. Kick Stand Since the MVP-9000i device is designed to be a unit used away from its docking station, it has an extendable “kickstand” on the back of the unit (FIG. 2). This may be opened by physically lifting the free end of the kick stand away from the device. The device may then be propped up on a flat surface and accessed in a normal fashion. Audio/Video Capabilities The MVP-9000i has the capability of displaying multiple JPEG and PNG files at one time. The device also supports streaming motion JPEG video (of the sort used by many IP and Web cameras) and hardware acceleration of Motion JPEG (previously configured in TPDesign4), as well as MP3 and WAV audio files. Power Management The MVP-9000i utilizes a dual voltage external power supply. It may be recharged through the supplied PS3.0 Power Supply (FG423-30), as well as through the MVP-TDS-9 Table Docking Station (FG5967-1X) or the MVP-WDS-9 Wall Docking Station (FG5967-1X). For more information, see the Accessories section on page 11 for details. Charging Lithium Polymer batteries at high temperature will reduce the battery life. Industry guidelines dictate that batteries should not be charged at temperatures above 45° C (113° F). The temperature is determined by a combination of the ambient temperature where the panel is located, plus temperature increases normally occurring inside electronic devices containing batteries. AMX has implemented battery temperature monitoring features to maximize the rate of battery charging, while staying within industry temperature guidelines. Battery charge times will increase in installations where the room temperature is above 25° C (77° F), and may be temporarily suspended at room temperatures above 30° C (86° F). Battery charging will automatically resume once the temperature has fallen to appropriate levels. Minimizing the display backlight intensity and turning off the backlight during periods of non-use will also yield faster charge times. Although the MVP-9000i unit is equipped with a mini-USB port, the device cannot be powered through the USB port. The port is only used for uploading firmware. When not in active use, the MVP-9000i conserves battery life between chargings. Pressing the touch screen will return the device to its On Mode. For more information on the battery, see the Battery Life and Replacement section on page 183. MVP-9000i Modero® Wireless Touch Panel with Intercom Introduction Cleaning the Touch Overlay and Case Always use a clean cotton cloth and a spray bottle containing water or any standard ammonia-free glass cleaner can be used to clean the touch screen. Do NOT use alcohol-based cleaners, as alcohol-based cleaners can damage the device’s touch screen overlay. Do not directly spray the device: instead, spray the cloth to clean the touch screen overlay. Do NOT use an abrasive of any type to clean the MVP-9000i, as this may permanently damage or remove the device’s finish. Picture View Picture View is a new feature debuting with the MVP-9000i. Inserting a microSD memory card into the slot on the left side of the device, or connecting a USB drive via the mini-USB port (FIG. 2), allows the MVP-9000i to access JPEG images on that card and display them on the touchscreen (FIG. 3). Individual images may be accessed at any time, or the entire collection may be displayed for predetermined times. Picture View may be stopped at any time by removing the memory card or USB drive, and the MVP-9000i will return to its default display page. FIG. 3 Picture View display To start Picture View: 1. Connect a USB drive to the device or insert a microSD memory card into the microSD memory card slot. Picture View will automatically recognize all available images on the drive or memory card and start displaying them on the touchscreen. MVP-9000i Modero® Wireless Touch Panel with Intercom Introduction 2. When the images begin to display, touch any place on the touchscreen to open the configuration popup menu (FIG. 4). If no selection is made, this menu will remain in place for 15 seconds and then disappear. It may be accessed again by touching anywhere on the touchscreen. Stop Random/ A-Z Previous Pause/ Counter Resume Next Timer FIG. 4 Picture View configuration popup menu 3. On the leftmost red button, select between Rand (images display at random) and A-Z (images display in alphabetical order based on the name of the file). 4. The four blue buttons allow scrolling through saved images and the rate of display: The Previous button returns the display to the previously displayed image. The Stop button stops Page View and returns to the default panel page. The Pause/Resume button allows the display to stop on one particular image. Press it again to resume the display procession. The Next button moves the display to the next stored image. If the MPVP-9000i has not accessed all of the images available on a USB drive or memory card, Page View will display the last one uploaded to date. 5. On the rightmost red button, select the number of seconds a selected image will be displayed in Picture View. This may be selected between 5, 10, 15, 30, and 60 seconds. 6. The counter beneath the buttons displays the number of images currently uploaded by the MVP-9000i versus the number detected on the USB drive or microSD card. Preview Mode and Normal Mode Picture View has two modes: Preview Mode and Normal Mode. Preview Mode allows the user to configure Picture View. Once an SD card or a USB drive containing images is inserted into the panel, the images will begin to display. Touching any place on the display will result in the configuration popup to slide from the bottom of the display. Picture View goes into its Normal Mode when the MVP-9000i goes into idle timeout while connected to a USB drive or memory card. Normal Mode displays images until the touchscreen or capacitive touch buttons are touched, or some other wakeup event is detected. When the device goes back into timeout, Normal Mode will return to displaying images until the USB drive or memory card are removed from the device. Picture View Send Command Picture View may be enabled or disabled with the ^PIC Send Command. For more information, please refer to the ^PIC section on page 153. MVP-9000i Modero® Wireless Touch Panel with Intercom Introduction All images must be in JPEG format. PNG and other image formats cannot be viewed through Picture View. Seamless Wireless to Wired Swap The MVP-9000i's unique design allows for wireless as well as wired connectivity with the appropriate Table Docking Station or Wall Docking Station. To prevent offline events when transitioning between wired and wireless connectivity, the MVP-9000i allows for seamless swapping. For swapping to work correctly, the Wired (page 72) and WiFi (page 73) network settings must be configured properly. The current connection mode to the master is indicated by the connection icon in the upper right hand corner of the setup pages as well as in the Current Connection field in the System Settings page under the Master tab. FIG. 5 “Attempting to Undock” popup window Refer to the Miscellaneous MVP Strings section on page 156 for strings that are sent to the master when the panel is docked and undocked. Swapping between wired and wireless connections is only supported when the Master Mode is set to URL. For more information, please refer to the System Settings Page section on page 70. To swap from a wireless connection to a wired one, simply place the panel in a Table Docking Station or Wall Docking Station. To swap from a wired connection to a wireless connection, you must first initiate an undock request. This can be done with the undock button on the Docking Station, or with the Undock Panel button in the System & Panel Options page (please refer to the System & Panel Options page section on page 66). The swap will happen once a valid password is entered (if enabled). If the panel does not swap to the master immediately, a Confirmation Dialog popup will notify the user (FIG. 5). The user has the option to force an undock which will cause an offline event, or to cancel the undocking and remain in the dock. If the swap is completed sometime after the popup is displayed, the popup will disappear automatically. The popup will also disappear after a 15-second countdown. If an undock is initiated during a VoIP call or Dynamo session, pressing the Yes button ends all VoIP calls in progress and Dynamo sessions. After a successful swap from wired to wireless communication, if the panel is not removed from a Table Docking Station after 30 seconds, the dock will automatically lock the latch and swap back to wired communication. MVP-9000i Modero® Wireless Touch Panel with Intercom Introduction The firmware version of the Master controller must support swapping. If the user does not want to use the mechanical latch on the TDS or utilize the swapping feature, the Table Dock Latch button may be disabled or set to Off in the System & Panel Options page. If an undock is initiated during a VoIP call or a Dynamo session, a warning popup will be displayed (FIG. 6), allowing the user to proceed with the undock and disconnect sessions or calls, or cancel the undock FIG. 6 Confirmation Dialog popup window for undocking MVP-9000i Modero® Wireless Touch Panel with Intercom Introduction 10 MVP-9000i Modero® Wireless Touch Panel with Intercom Accessories Accessories Table Docking Station The Power-over-Ethernet MVP-TDS-9 Table Docking Station (FIG. 7) charges the MVP-9000i and provides a wired Ethernet connection when the panel is docked. The MVP-TDS-9's sleek design allows the panel to slide into perfect placement in the docking station and includes password protection support for panel removal. When the MVP-9000i is placed into the PoE docking station, it automatically switches from wireless to wired Ethernet communication. The Docking Station is available in either black (MVP-TDS-9-GB, FG5967-10) or white (MVP-TDS-9-GW, FG5967-11). Docking Station cradle Release button FIG. 7 MVP-TDS-9-GB Table Docking Station - Front MVP-TDS-9 Specifications Dimensions (HWD): • 6.25” x 11.50” x 5.50” (15.88cm x 29.21cm x 13.97cm) Weight: • 1.25 lbs (.57 kg) Power Requirements: • 30 W (Class II listed power supplemented), supplied via the PS-POE-AT High-Power PoE Injector. Startup Power Requirements: • Cradle and panel (not charging): 16 W Front Components: • Docking Station cradle: for supporting the device while connected or charging. • Cradle and panel (charging): 23 W • Ejection: 23 W • Release button: before removing the MVP touch panel, press this button to switch the panel from a wired to a wireless Ethernet connection to its network. • 12-pin charging connector on bottom of device cradle. Rear Components: • 2 USB ports on the left side of the device, for firmware or file download to a docked touch panel. These ports may also be used for using a keyboard and/or mouse with the touch panel. Operating/Storage Environments: • Operating Temperature: 0° C (32° F) to 40° C (104° F) • Battery Charging Temperature: 0° C (32° F) to 30° C (86° F) • Operating & Battery Charging Humidity: 20% to 85% RH • Storage Temperature: -10° C (-14° F) to 60° C (140° F) • Storage Humidity: 5% - 85% RH Included Accessories • MVP-TDS-9 Table Docking Station Installation Guide (93-5967-10) • PS-POE-AT High Power PoE Injector (FG423-81) • Ethernet cable - black (ECA5967-22BL) (for MVP-TDS-9-GB) • Ethernet cable - white (ECA5967-22WH) (for MVP-TDS-9-GW) Other AMX Equipment: • MVP-9000i Modero Viewpoint Widescreen Touch Panel with Intercom - Black (FG5967-01) • MVP-9000i Modero Viewpoint Widescreen Touch Panel with Intercom - White (FG5967-02) MVP-9000i Modero® Wireless Touch Panel with Intercom 11 Accessories Powering the MVP-TDS-9 The MVP-TDS-9 uses the PS-POE-AT High-Power PoE Injector (FG423-81) to provide direct power for the MVP panel via a standard Ethernet connection, both for standard function and for charging its internal battery. This also allows a wired Ethernet connection for the panel, and the panel may be used normally while docked in the MVP-TDS-9 without the need for a wireless connection. Use only the RJ45 plug on the included Ethernet cable with the MVP-TDS-9. Other RJ45 plugs will not fit in the device’s jack, and attempting to use another plug may damage the jack. If necessary, the cable may be spliced and shortened for special installations. For both Ethernet connection and for power for the MVP-9000i, the MVP-TDS-9 uses a special Ethernet cable (FIG. 8) in order to connect to the PS-POE-AT. To Ethernet cable connected to PS-POE-AT To input port on the MVP-TDS-9 FIG. 8 MVP-TDS-9 cable To connect the MVP-TDS-9 to the PS-POE-AT via the special Ethernet cable: 1. Connect the terminal end of the cable to the PWR connector on the bottom of the MVP-TDS-9. 2. To prevent wear on the power supply cord and assure that the device’s base is in full contact with the table surface, press the cord into the locking groove running across the bottom of the device (FIG. 9). 3. The other end of the included Ethernet cable has an input port, intended for a standard RJ45 jack. Use a standard Ethernet cable to connect the Ethernet/PoE port to the PS-POE-AT plugging the other end of the Ethernet cable into the Data & Power Out RJ45 port on the PS-POE-AT. Make sure that the PS-POE-AT’s power cable is connected to the device and to an available power source, and that the incoming Ethernet cable accessing the Data In RJ45 jack is connected to the desired network. 4. Place the touch panel in the Docking Station cradle, guiding it into place with the locking grooves on each side of the cradle (FIG. 9). When fully seated, the touch panel’s Docking Station connector should be in contact with the Docking Station’s charger pins. 12 MVP-9000i Modero® Wireless Touch Panel with Intercom Accessories Recharging To recharge the MVP-9000i, slide the device into the Table Docking Station cradle bottom-first and make sure the device is fully seated in the Docking Station. The charger pins in the bottom of the cradle (FIG. 9) must be in contact with the connector on the bottom of the MVP-9000i for it to start recharging. The MVP panel will stop recharging automatically once the battery has achieved its maximum charge. Docking Station cradle Charger pins USB ports (2) Locking groove FIG. 9 MVP-TDS-9-GW Table Docking Station - Rear Using the USB ports The MVP-TDS-9 has two USB ports on the left of the device behind the Docking Station cradle (FIG. 9). These ports may be used for transferring files to the MVP-9000i, as well as ports for USB-powered accessories. Undocking the Touch Panel For information on removing a touch panel locked into the MVP-TDS-9, please refer to the Undocking from the MVP-TDS-9 or MVP-WDS-9 section on page 22. Cleaning the MVP-TDS-9 You should clean the MVP-TDS-9 Table Docking Station after each day’s use to maintain the device’s appearance. Always use a clean cotton cloth and a spray bottle containing water or a non-ammonia-based cleaner, as alcohol-based cleaners can damage the device. Do not directly spray the device: instead, spray the cloth to prevent moisture from collecting on the charger pins. Do NOT use an abrasive of any type to clean the Table Docking Station, as this may permanently damage or remove the device’s finish. MVP-9000i Modero® Wireless Touch Panel with Intercom 13 Accessories Wall Docking Station While charging the MVP-9000i, the Power-over-Ethernet MVP-WDS-9 Wall/Flush Mount Docking Station provides fast, reliable wired Ethernet communication to the touch panel. In addition, the MVP-WDS-9 employs a unique, anti-theft locking mechanism to keep the touch panel safe and secure. With a push of a button, the panel glides forward for simple removal and transport. The Wall Docking Station is available in either white (FG5967-13) or black (FG5967-12). MVP-WDS-9 MVP-9000i Security Release button FIG. 10 MVP-WDS-9-GB Wall Docking Station - Front The features of the MVP-WDS-9 include: Touch panel password feature for security Integrated docking alignment guides for easy docking. MVP-WDS-9 Specifications Dimensions (HWD): • 9.75" x 12.50" x 2.13" (24.77cm x 31.75cm x 5.40cm) Note: Always use the cutout/installation dimensions for the MVP-WDS-9 when installing this unit into various surfaces. This SP engineering drawing is available online at www.amx.com. Power Requirements: • 30 W (Class II listed power supplemented), supplied via the PS-POE-AT HighPower PoE Injector. Startup Power Requirements • Cradle and panel (not charging): 16 W Weight: • Without back box: 1.50 lbs (0.68 kg) • Cradle and panel (charging): 23 W • Ejection: 23 W • With back box: 2.40 lbs (1.09 kg) Front Panel Components: • Securing Magnets: Secures MVP touch panel during ejection. • Security Latch: Adds the primary layer of security when mounting an MVP touch panel. When the device is inserted, this latch grabs onto the rear of the touch panel and secures it to prevent it from inadvertently being removed. • Interface Connector: A set of contacts that connect to the underside MVP connector strip. This connection provides both communication and power between the touch panel and the MVP-WDS-9. • Support Cradle: This retractable mechanism supports a resting MVP panel and allows a user to either insert or remove a connected MVP panel. • Security Release pushbutton: Located on the front of the unit, this pushbutton toggles an on-screen security keypad if security is enabled. - Entering the correct release code allows the MVP-WDS-9 to release the touch panel from the security latch. 14 MVP-9000i Modero® Wireless Touch Panel with Intercom Accessories MVP-WDS-9 Specifications (Cont.) Operating/Storage Environments: • Operating Temperature: 0° C (32° F) to 40° C (104° F) • Battery Charging Temperature: 0° C (32° F) to 30° C (86° F) • Operating & Battery Charging Humidity: 20% to 85% RH • Storage Temperature: -10° C (-14° F) to 60° C (140° F) • Storage Humidity: 5% - 85% RH Included Accessories • MVP-WDS-9 Wall Docking Station Installation Guide (93-5967-12) • Snap-On Ferrite (04-0007) • MVP-WDS-9 Wall Docking Station Template (68-5967-01) • PS-POE-AT High Power PoE Injector (FG423-81) Other AMX Equipment: • MVP-9000i-GB Modero Wireless Touch Panel, Black (FG5967-01) • MVP-9000i-GW Modero Wireless Touch Panel, White (FG5967-02) • MVP-TDS-9-GB Black Table Docking Station (FG5967-10) • MVP-TDS-9-GW White Table Docking Station (FG5967-11) • CB-MVP-WDS9 Rough-In Box (FG038-13) The MVP-9000i touch panel remains locked in the MVP-WDS-9 until unlocked by the user. This may be done by entering an appropriate password (please refer to the Passwords section on page 97 for more information), or by pressing the Security Release button on the front of the device in emergencies. The station ejects the device top first. The device uses two neodymium rare-earth magnets to keep the MVP-9000i from falling out of its cradle when the touch panel is angled forward. Wall Docking Station MVP-9000i Security Release button FIG. 11 MVP-WDS-9-GB Wall Docking Station - Side view Unlocking the Touch Panel For information on removing a touch panel locked into the MVP-WDS-9, please refer to the Undocking from the MVP-TDS-9 or MVP-WDS-9 section on page 22. MVP-9000i Modero® Wireless Touch Panel with Intercom 15 Accessories Recharging To recharge the MVP-9000i: 1. Slide the device into the Wall Docking Station cradle bottom-first and make sure the device is fully seated in the Docking Station (FIG. 12). MVP-9000i MVP-WDS-9 FIG. 12 Inserting the MVP-9000i into the MVP-WDS-9 2. Press the top of the MVP-9000i back until it clicks. The touch panel is now locked into the Docking Station, and the station will automatically charge the device’s battery. (Please refer to the Power Management Page section on page 53 to check on the battery charge status.) 3. To release the touch panel, unlock the touch panel and wait for the Wall Docking Station to pivot the touch panel away from the wall (FIG. 18). 16 MVP-9000i Modero® Wireless Touch Panel with Intercom Accessories Installing the MVP-WDS-9 Since the Wall Docking Station is intended to be affixed to a wall or other permanent structure, care must be taken to ensure its proper installation to prevent potential damage to the MVP-9000i placed within. Other than wall installation tools, the only tool required for this installation is a #2 Phillips screwdriver. Installing the Wall Docking Station and Plastic Back Box The Plastic Back Box has two pairs of knockouts at the top of the box and four (4) lockdown wings attached to the box with Phillips-head screws. For ease of installation, the interior of the box contains an “UP” arrow pointing to the knockouts. The optional CB-MVP-WDS9 Metal Rough-In Box is not required for installation of the supplied Plastic Back Box, but it offers an extra level of support. To install the Plastic Back Box: 1. Cut a hole into the wall or surface intended to hold the back box. The back box is sized 12 1/16 inches (30.64 cm) long and 8 11/16 inches (22.07 cm) high, so the hole should be at least 1/4” (6.4mm) smaller in each dimension (FIG. 13). Use the included MVP-WDS-9 Wall Docking Station Template (68-596701) as an aid for hole placement and measurement. 12.06" 8.25"cm) (30.64 (212.7mm 8.69" 5.56"cm) (22.07 (141.29mm) 8.69" 5.56"cm) (22.07 (141.29mm) 12.06" 8.25" (30.64 cm) (212 7mm) FIG. 13 Recommended cutout for the MVP-WDS-9 plastic back box Make sure to measure the size of the intended hole before starting to cut it. Cutting the hole slightly smaller than the dimensions to allow for adjustments is highly recommended. 2. Select the knockout to be removed from the top of the box. The box has two knockouts, at the top left and the top right. To assist with wiring, and to avoid mechanical stresses on the wire and the mechanism of the Wall Docking Station, the top left knockout, when viewing the device from the rear, is preferred for use for Ethernet installation. Use the top right knockout for USB cable connection. MVP-9000i Modero® Wireless Touch Panel with Intercom 17 Accessories 3. Connect the PS-POE-AT High-Power PoE Injector to a power source. Connect the PS-POE-AT to an Ethernet switch on the network via one length of Ethernet cable and insert one length of Ethernet cable for connection to the Wall Docking Station. 4. Run the Ethernet cable through the knockout into the back box. Pull out about six inches (15.25cm) of cable into the back box to facilitate installation of the MVP-WDS-9. 5. Slide the plastic back box into the hole, being careful not to twist or pinch the cable, and set it flush with the wall. Make sure that all of the lockdown wings are folded into their slots before attempting to insert the box. For ease of installation, the inside of the box has the direction “UP” labeled for reference. 6. Extend the wings on the sides of the box by tightening the screws inside the box. Not all of the wings must be extended to lock the box in place, but extending a minimum of the top and bottom wings is highly recommended. Apply enough pressure to the screw head to keep the box flush with the wall: this ensures that the wing will tighten up against the inside of the wall. Make absolutely certain that the box is in its intended position. Once the box lockdown wings are extended within the box’s hole within the wall, removing the box will be extremely difficult without damaging the wall in the process. The maximum recommended torque to screw in the wings on the plastic back box is 5 IN-IBS [5(NI-CM)]. Applying excessive torque while tightening the wing screws, such as with powered screwdrivers, can strip out the wings or damage the plastic back box. 7. Attach the included snap-on ferrite to the Ethernet cable, as close to the RJ-45 connector as possible. Attach the cable to the Ethernet Port (FIG. 14). Recommended USB installation Recommended Ethernet installation Knockout placement in back box Ethernet port Ferrite installation position Recommended Ethernet cable path FIG. 14 MVP-WDS-9 - Ethernet cable path 8. Firmly seat the device against the back box. Make sure that the tab connector at the bottom of the device is locked into the back box. 9. Insert the two installation screws from the MVP-WDS-9 Installation Kit into the screw holes in the interior compartment of the device and tighten them to anchor the device to the back box. For ease of installation, put each screw on a neodymium magnet in the device’s interior compartment to keep them on hand until they are needed. 18 MVP-9000i Modero® Wireless Touch Panel with Intercom Accessories 10. After fully seating the screws, wipe down the area around the screw holes with the alcohol prep pad from the Installation Kit. Take a rubber foot and remove its adhesive backing. Put the foot, adhesive-side down, in the slot surrounding the screw hole in the Wall Docking Station. Press down firmly to remove any air bubbles from underneath the foot. 11. Install an MVP-9000i device by placing it into the interior compartment bottom-first. Press the top of the touch panel until it is flush with the Wall Docking Station. The neodymium magnets will hold it in place. 12. To remove the MVP-9000i, unlock the touch panel (see the Unlocking the Touch Panel section on page 15 for more information) and wait for the touch panel to pull away from the Wall Docking Station. Once it has been released, grip it by the top of the device, and pull it free from the Docking Station. MVP-9000i Modero® Wireless Touch Panel with Intercom 19 Accessories Installing the Optional Metal Rough-In Box The optional metal rough-in box (FG038-13) is 11.97 inches (30.40cm) wide at its widest dimension (wider than the bezel of the Wall Docking Station), and is only intended for pre construction installations (FIG. 15). The Metal Rough-In Box is used in conjunction with the Wall Docking Station’s plastic back box. In order to guarantee a stable installation of the MVP-WDS-9, the distance between the CB-MVP-WDS9 and the outer wall surface must be a minimum of .50 inches (1.27cm) and a maximum of .1.50 inches (3.81cm). Dry Wall Clips Screws for Dry Wall Clips Front Cover Mounting Screws FIG. 15 CB-MVP-WDS9 Rough-In Box - with front cover Pre-Wall Installation of the CB-MVP-WDS9 1. Remove the rough-in box cover (A in FIG. 15) before installation of the Rough-In Box (B). The cover MUST be removed before drywall installation. The cover may be reinstalled after drywall installation using 4-40 screws (not included). 2. Fasten the CB-MVP-WDS9 rough-in box to the stud through the holes on the Stud Mounting Tabs, using either nails or screws (not provided). Ensure that the metal rough-in box is flush with the 2x4 studs. Any overhang will affect the installation of the covering sheetrock, as well as affect the placement of the Plastic Back Box. 3. Remove the appropriate wiring knockouts from the rough-in box to accommodate the cables being threaded through to the MVP-WDS-9. Make sure that the power cable has been pulled through the metal rough-in box by the resident electrician before continuing the installation. 4. Thread the incoming Ethernet and USB wiring through the knockouts. Using the left wiring knockouts for USB connector cables and the right wiring knockouts for the LAN/PoE In cable is very highly recommended with this installation. Leave enough slack in the wiring to accommodate installation of the docking station. 5. Install the drywall/sheetrock before inserting the back box for the CB-MVP-WDS9. 20 MVP-9000i Modero® Wireless Touch Panel with Intercom Accessories 6. Cut out the opening for the MVP-WDS-9 where the wall has been placed over the Rough-In Box. Cutting out the surface slightly smaller than what is outlined in the installation drawings, so that you can make any necessary cutout adjustments, is very highly recommended. Other MVP-WDS-9 installations The Wall-Mounted Docking Station is designed to be installed in various different locations, such as into the face of a wooden podium or the top of a table. Depending upon the ability to wire it to a power source, WallMounted Docking Stations may be installed on vertical or horizontal surfaces composed of such materials as wood, brick, and glass. Installing a Wall-Mounted Docking Station into a solid wall thicker than a standard thickness of sheetrock is possible, but requires special preparation. If installing into a solid wall of concrete or rock, a recess must be chiselled or cut out to match the size of the device. The box is sized 8.375 inches (21.27cm) long and 5.75 inches (14.60cm) high, so the hole should be at least 1/4” (0.64cm) smaller in these dimensions. To facilitate the full range of movement of the device’s components, the recess must be at least 2.69 inches (6.83cm) deep. Ensure that the power cable has been installed in the wall and is accessible by the installer before chiseling out the recess. Instead of using the lockdown wings to secure the Plastic Back Box, standard concrete screws may be inserted through the screw holes after removing the lockdown wings. However, drill the concrete screw holes into the wall before setting the screws into the box, as excessive torque applied to the screws will damage the box. To avoid this, the box may be installed with adhesive. Test an unobtrusive spot on the back of the box with a sample of the adhesive to check for any adverse reactions before installing the device. MVP-9000i Modero® Wireless Touch Panel with Intercom 21 Accessories Undocking from the MVP-TDS-9 or MVP-WDS-9 Once placed within either the Table Docking Station or the Wall Docking Station, the MVP-9000i remains secured until the user unlocks it. A ten-second lag between the touch panel being placed in either Docking Station and the security feature enabling allows the user to remove the touch panel if it is accidentally put into the device. To release the touch panel from either Docking Station: 1. Press the Release button (see FIG. 7 for the Table Docking Station or FIG. 11 for the Wall Docking Station). 2. A password keypad will pop up on the MVP-9000i screen. Enter a password in the password keypad and press Enter. Unique passwords may be entered for up to four unique users as well as the administrator. For more information on setting passwords, please refer to the Passwords section on page 97. 3. If the MVP-9000i was conducting a SIP call or Dynamo session at this time, a confirmation dialog window appears to warn that any open sessions or calls will end (FIG. 16). Click Yes to undock the panel and disconnect the call/session, or No to keep the panel in the Docking Station and continue the call/ session. FIG. 16 Undocking confirmation dialog window 22 MVP-9000i Modero® Wireless Touch Panel with Intercom Accessories 4. When disconnecting from a Docking Station, the MVP-9000i will attempt to switch from a Wired to Wireless connection. If the touch panel is unable to connect to a wireless network, a confirmation window appears warning that the panel will lose its network connection (FIG. 17). Press Undock if you still wish to remove the touch panel, or Cancel to keep the panel in the Docking Station. If you do not choose either option, the undocking attempt will automatically cancel within 15 seconds. FIG. 17 “Attempting to Undock” confirmation window 5. When disconnecting from a Wall Docking Station, wait for the Wall Docking Station to pivot the touch panel away from the wall (FIG. 18). MVP-WDS-9 MVP-9000i FIG. 18 Ejected position for the MVP-9000i 6. Remove the device. The device will remain in the ejected position in the MVP-WDS-9 until the MVP9000i is removed. Wait until the MVP-WDS-9’s ejection door has completely withdrawn before reinstalling the MVP-9000i. MVP-9000i Modero® Wireless Touch Panel with Intercom 23 Accessories 24 MVP-9000i Modero® Wireless Touch Panel with Intercom Configuring Communication Configuring Communication Overview All control for a MVP-9000i touch panel is established through a NetLinx Master. Communication between the MVP and the Master consists of using wired LAN, Wireless Ethernet (DHCP, Static IP) or USB. References to Ethernet in this manual focus on the use of Wireless Ethernet via the MVP’s WiFi Card. Before commencing, verify you are using the latest NetLinx Master and Modero panel-specific firmware. Verify you are using the latest versions of AMX’s NetLinx Studio and TPDesign4 programs. In the example below (FIG. 19), three MVP-9000i devices are shown at varying distances from an AP gateway. As with any other AP network, the gateway is spaced so as to allow a maximum wireless coverage for the three devices. Panel 1 Network Master IP Network Panel 2 802.11a/b/g AP Panel 3 FIG. 19 System Deployment Diagram When initially installing the MVP-9000i, some basic configuration items, including network settings and NetLinx settings, will need to be set. For more information, refer to the Protected Setup Pages section on page 63. The MVP-9000i defaults to Ethernet and Auto mode for its Master connection. MVP-9000i Modero® Wireless Touch Panel with Intercom 25 Configuring Communication IR Communication In certain situations, the MVP-9000i may be used as an infrared remote device for other AMX controllers. The device can transmit IR over 20 feet (6.10 m) from the panel at AMX frequencies of 38KHz and 455KHz, and third-party device frequencies between 20KHz and 120KHz. IR receivers and transmitters on G4 panels share the device address number of the panel. The MVP-9000i includes an IR transmitter for communication between the device and the NetLinx Master and between separate devices. The transmitter is located behind the IR Emitter Panel on the rear of the device (FIG. 20). IR Emitter Panel FIG. 20 IR transmitter window on the MVP-9000i-GB Modero Setup and System Settings All AMX Modero panels, including the MVP-9000i, feature on-board Setup pages. Use the options in the Setup pages to access panel information and make various configuration changes. Accessing the Setup and Protected Setup Pages 1. At any time, hold the bottom left capacitive touch button and the bottom of the directional pad for 3 seconds. Alternately, press the Reset button on the left side of the device and hold it for 6 seconds. (For more information, please refer to the Accessing the Setup pages section on page 47.) This opens the Status page (FIG. 21). FIG. 21 Status page 26 MVP-9000i Modero® Wireless Touch Panel with Intercom Configuring Communication 2. Press the Protected button. This opens a popup keypad for password entry(FIG. 22). Enter the device’s password and press Done to proceed to the Protected Setup page (FIG. 23). FIG. 22 Protected Setup password popup window The default password for the Protected Setup page is 1988, but this may be changed at any time. FIG. 23 Protected Setup page For more information on the Setup and Protected Setup pages, refer to the Setup Pages section on page 47 and the Protected Setup Pages section on page 63. Setting the Panel’s Device Number In the Protected Setup page: 1. Press the Device Number field in the Device Information section to open the Device Number keypad. 2. Enter a unique Device Number assignment for the device, and press Done to return to the Protected Setup page. The Device Number default is 0. 3. From the Setup page, press Reboot to reboot the device and apply the new Device Number. MVP-9000i Modero® Wireless Touch Panel with Intercom 27 Configuring Communication Wireless Settings - Wireless Access Overview DHCP When choosing DHCP, a DHCP server must be accessible before the IP, subnet, and gateway fields are populated. The parameters of the wireless card must be set before selecting Ethernet as the Master Connection Type. The Wireless Access Point communication parameters must match those of the pre-installed wireless CF card inside the device. MVP touch panels connect to a wireless network through the use of a pre-installed AMX 802.11a/b/g wireless interface card. This allows users to communicate via a wireless LAN. For a more detailed explanation of the new security and encryption technology, refer to the Appendix B: Wireless Technology section on page 197. For more information on utilizing the AMX Certificate Upload Utility in conjunction with the EAP security, refer to the AMX Certificate Upload Utility section on page 203. Configuring Wireless Network Access The first step in connecting the MVP-9000i to a wireless network is to configure the wireless communication parameters within the device’s System Settings page. This is done via the System Settings page, which allows configuration of the IP Address, System Number and Username/Password information assigned to the target Master. Step 1: Configure the Device’s WiFi Settings The first step to a successful setup of the internal wireless card is to configure the WiFi tab on the System Settings page. This section configures the communication parameters from the MVP panel to the web. Wireless communication using a DHCP Address In the Protected Setup page: 1. Touch the Network button to open the System Settings page. 2. Select the WiFi tab (FIG. 24). FIG. 24 System Settings page - WiFi tab 3. Toggle the DHCP/Static field until the choice cycles to DHCP. This action causes all fields in the IP Settings section, other than Host Name, to be greyed-out. 28 MVP-9000i Modero® Wireless Touch Panel with Intercom Configuring Communication 4. Press the optional Host Name field to open the Host Name keyboard (FIG. 25) and enter the host name information. The default name is "localhost". FIG. 25 Host Name keyboard 5. Press OK after assigning the alpha-numeric string of the host name. 6. The remaining greyed-out fields in the IP Settings section cannot be altered. Once the panel is rebooted, these values are obtained by the unit and displayed in the DNS fields after power-up. This information can be found in either the Workspace - System name > Define Device section of the code that defines the properties for the panel, or in the Device Addressing/Network Addresses section of the Tools > NetLinx Diagnostics dialog. 7. Set up the security and communication parameters between the wireless card and the target AP by configuring the Wireless Settings section on this page. Refer to Step 2: Configure the Card’s Wireless Security Settings section on page 32 for detailed procedures to setup either a secure or insecure connection. Wireless Communication Using a Static IP Address 1. From the Protected Setup page, press the Network button to open the System Settings page. Wireless communication is set within the WiFi tab of this page (FIG. 24). Check with your System Administrator for a pre-reserved Static IP Address to be assigned to the panel. This address must be obtained before continuing with the Static assignment of the panel. 2. Toggle the DHCP/Static field until the choice cycles to Static. The IP Address, Subnet Mask, and Gateway fields then turn red, noting that they are now user-editable. 3. Press the IP Address field to open a keyboard and enter the Static IP Address provided by the System Administrator. Press OK after entering the IP address information and repeat the same process for the Subnet Mask and Gateway fields. 4. Press the optional Host Name field to open the keyboard and enter the Host Name information. Press OK after assigning the alpha-numeric string of the host name. 5. Press the Primary DNS field to open a Keyboard, enter the Primary DNS Address (provided by the System Administrator) and press OK when compete. Repeat this process for the Secondary DNS field. 6. Press the Domain field to open a Keyboard, enter the resolvable domain Address (this is provided by the System Administrator and equates to a unique Internet name for the panel), and press OK when complete. MVP-9000i Modero® Wireless Touch Panel with Intercom 29 Configuring Communication 7. Set up the security and communication parameters between the wireless card and the target AP by configuring the information on the second page of the WiFi tab. Refer to the following section for detailed procedures to set up either a secure or unsecure connection. Using the Wireless Site Survey Tool This tool allows a user to “sniff out” all transmitting Wireless Access Points within the detection range of the internal wireless card (FIG. 26). Once the Site Survey button is pressed, the device displays the Wireless Site Survey page, which contains the following categories: Network Name (SSID) - Wireless Access Point names Channel (RF) - Channel currently being used by the AP (Access Point) Security (if undetectable - N/A) - Security protocol enabled on the AP Signal - Displays the signal strength MAC Address - Unique identification of the transmitting Access Point FIG. 26 Wireless Site Survey page To access the Wireless Site Survey page: 1. From the System Settings page, touch the WiFi tab. 2. At the bottom of the page, press the Next button to move to the second WiFi tab page. 3. Press the Site Survey button. This action launches the Wireless Site Survey page, which displays a listing of all detected APs in the communication range of the internal card. The card scans its environment every four seconds and adds any new APs found to the list. Every scan cycle updates the signal strength fields. Access points are tracked by MAC Address. If the AP’s SSID is set as a blank, then N/A is displayed within the SSID field. If the AP’s SSID is not broadcast, it will not show up on the Wireless Networks screen. If an AP is displayed in the list is not detected for 10 scans in a row, it is then removed from the screen. In this way, a user can walk around a building and track access points as they move in and out of range. 4. Sort the information provided on this page by pressing on a column name. This moves the sorting arrow to that column, where it may be toggled up or down. Up arrow - indicates that the information is being sorted in an ascending order. Down arrow - indicates that the information is being sorted in a descending order. If the panel detects more than 10 APs, the Up/Down arrows at the far right side of the page become active (blue) and allow the user to scroll through the list of entries. 30 MVP-9000i Modero® Wireless Touch Panel with Intercom Configuring Communication 5. Select a desired Access Point by touching the corresponding row. The up arrow and down arrow will be grayed out if ten or fewer access points are detected. If more are detected, then they will be enabled as appropriate so that the user can scroll through the list. 6. With the desired AP selected and highlighted, click the Connect button to be directed to the selected security mode’s popup window with the SSID field filled in. From there, either Cancel the operation or fill in any necessary information fields and then click Save. Selecting an Open, WEP, or WPA-PSK Access Point and then clicking Connect will open the corresponding Simple Mode popup window (FIG. 27). For any other security mode, clicking Connect will open the Enterprise Mode popup window (FIG. 28). Different EAP methods are selectable from the Security Type button. FIG. 27 Wireless Security: Simple Mode popup window FIG. 28 Wireless Security: Enterprise Mode popup window MVP-9000i Modero® Wireless Touch Panel with Intercom 31 Configuring Communication Step 2: Configure the Card’s Wireless Security Settings The second step in setting up the wireless card is to configure the Wireless Settings section of the WiFi Settings tab. This section configures both the communication and security parameters from the internal wireless card to an access point (AP). The procedures outlined within the following sections for an 802.11a/b/g card facilitate a common security configuration to a target access point. Refer to the Appendix B: Wireless Technology section on page 197 for more information on other security methods. After setting up the wireless card parameters, configure the communication parameters for the target Master; see Step 3: Choose a Master Connection Mode section on page 33. Configuring the Device’s Wireless Card for Secured access to a WPA-PSK-Secured AP In the System Settings page: 1. Select the WiFi tab. 2. Press the Next button to move to the second WiFi tab page. 3. Enter the SSID information by: Automatically filling it by pressing the Site Survey button. From the Site Survey page, choosing an AP from within the Site Survey page and then pressing the Connect button at the bottom of the page (FIG. 26). The selected AP should be preconfigured with an WPA-PSK password. Manually entering the SSID information into the appropriate fields by following steps 7 through 9. 4. From the two Security Mode selections, press the Simple button to open the Wireless Security: Simple Mode popup window. Press the Security Type field to select WPA-PSK. 5. Press the red SSID field to display an on-screen Network Name (SSID) keyboard. 6. In this keyboard, enter the SSID name of the access point (case sensitive). 7. Click OK when complete or Abort to return to the popup window without saving any changes. 8. Enter the pre-configured WPA-PSK password. 9. From the Wireless Security: Simple Mode popup window (FIG. 27), press the Save button to incorporate the new information into the device and begin the communication process. 10. Verify the proper configuration in the fields in the WiFi tab. Refer to Step 1: Configure the Device’s WiFi Settings section on page 28 for detailed information. 11. Press the Back button twice to return to the Status page. Remember that the connection must be configured to a target Master from the System Settings page. 12. Monitor the WiFi Settings tab to verify that the IP address was obtained. This is confirmation of a successful connection to the AP. The signal level field should provide some value indicating the strength of the signal from the Access Point. If no signal or no IP Address is displayed, configuration of the network may be required. 32 MVP-9000i Modero® Wireless Touch Panel with Intercom Configuring Communication Step 3: Choose a Master Connection Mode The MVP-9000i requires a decision on the type of connection to be made between it and the Master. To establish a Master connection: 1. From the System Settings page, select the Master tab if it is not already selected. 2. The Current Connection field displays the current connection availability (FIG. 29). If this field reads “Any”, then connections may be made via Ethernet, wireless Ethernet, or USB. FIG. 29 System Settings page - Master Tab A Wired connection involves communication from the panel to a Master via a wired Ethernet connection to the network. This is available through the Wired tab on the System Settings page. A WiFi connection involves communication from the panel to a Master via a wireless connection to the network. This is available through the WiFi tab on the System Settings page. A USB connection is a direct connection from the panel’s mini-USB port to a corresponding USB port on the PC (acting as a Virtual Master). This is available through the USB tab on the System Settings page. 3. Select the Mode field to choose the master connection mode. The connection modes are Auto, URL, and Listen. For more information on the Connection Modes, please refer to the System Settings Master section on page 70. Although firmware upgrades can be conducted over a wireless Ethernet connection, transferring firmware KIT files over a wired LAN, USB data stick, or USB flash card is recommended, and only when the panel is connected to a power supply. If battery power is below 30 percent, and the touch panel is not connected to a power supply, the download will not be completed. MVP-9000i Modero® Wireless Touch Panel with Intercom 33 Configuring Communication Ethernet Over USB The MVP-9000i device supports an Ethernet over USB driver for panel downloads and firmware updates. This means that the device can connect to a host computer for updates through its Mini USB port instead of through a standard Ethernet port (FIG. 30). Mini USB port FIG. 30 USB Port on the MVP-9000i Firmware downloads require use of the USB Programming Cable (FG10-5965) and a computer running Windows XP. Touch Panel Setup To prepare the MVP-9000i for Ethernet for USB communication: 1. Turn on the MVP-9000i and wait for the device to finish booting up. 2. Insert the mini-USB end of the USB Programming Cable into the mini-USB port on the device. Insert the other end into the appropriate USB port on the computer containing the files to be downloaded. 3. When the connection is made, the Windows XP machine will detect the device as an unsupported USB device. It then presents a dialog that prompts the user for a suitable driver (FIG. 31): FIG. 31 Found New Hardware Wizard dialog 4. Select Yes, this time only and click on Next. 34 MVP-9000i Modero® Wireless Touch Panel with Intercom Configuring Communication 5. In the new window: - Select Use the following IP Address. Under IP address, provide an IP address. The USB interface IP address of the panel can be found in the System Settings page under the USB tab. The default USB IP of panel is 172.16.0.2, so the IP address for the USB interface on the PC must be 172.16.0.xx. Ensure that it is in the same subnet as the IP address given to the usb0 interface on the MVP-9000i, but make sure that it has a different node number. The IP address cannot be the same as the panel`s USB IP address. Under Subnet mask, set the suitable subnet mask. Make sure that the host machine has the same subnet mask. (The subnet mask for USB connection is 255.255.0.0, which is not userconfigurable.) Click OK. 6. In the next box (FIG. 32), make sure to: Select Search for the best driver in these locations Select Include this location in the search Click on Browse Select the folder that contains the 'linux.inf' file FIG. 32 Found New Hardware Wizard Installation Options dialog 7. Click on Next. 8. The Windows XP machine now searches for the suitable driver (FIG. 33). FIG. 33 Found New Hardware Wizard while searching for the driver MVP-9000i Modero® Wireless Touch Panel with Intercom 35 Configuring Communication 9. Once the system finds the driver, it displays its choice (FIG. 34). Click Finish to complete the driver installation. FIG. 34 Completing the Found New Hardware Wizard When an IP address is assigned to the usb0 interface on the device, Windows XP will make an attempt to assign an IP address to the corresponding interface on the Windows side. Usually, this IP address is a random value and in a totally different subnet. The user may set the Windows network properties for the Ethernet over USB interface to have a specific address whenever the Windows XP system detects an MVP-9000i with an assigned IP address. In Windows XP: 1. From the Windows XP desktop, click on Start > Settings > Network Connections. This opens a window listing the currently active network connections. 2. Select the connection that is specific to AMX USB Device Link. 3. Right click and select Properties. 4. In the Local Area Connection 3 Properties window (FIG. 35) under the General tab, select Internet Protocol (TCP/IP) and click on Properties. FIG. 35 Local Area Connection 3 Properties 36 MVP-9000i Modero® Wireless Touch Panel with Intercom Configuring Communication 5. In the new window: Select Use the following IP Address. Under IP address, provide an IP address (ensure that it is in the same subnet as the IP address given to the usb0 interface on the MVP-9000i). Under Subnet mask, set the suitable subnet mask. Make sure that the host machine has the same subnet mask. (The subnet mask for USB connection is 255.255.0.0, which is not userconfigurable.) Click on OK' 6. In the Local Area Connection 3 Properties window, click on OK. The user should now be able to run any TCP/IP application between the two systems. Configure a Virtual NetLinx Master using NetLinx Studio A Virtual NetLinx Master (VNM) is used when the target panel is not actually connected to a physical NetLinx Master. In this situation, the PC takes on the functions of a Master via a Virtual NetLinx Master. This connection is made by either using the PC’s Ethernet Address (via TCP/IP using a known PC’s IP Address as the Master) or using a direct mini-USB connection to communicate directly to the panel. Before beginning: 1. If using the mini-USB connection, verify the panel has been configured to communicate via USB within the System Settings page and that the USB driver has been properly configured. Changing the Master Connection type requires a reboot before the change takes effect. 2. In NetLinx Studio, select Settings > Master Communication Settings, from the Main menu to open the Master Communication Settings dialog (FIG. 36). FIG. 36 Master Communications Settings dialog 3. Click the Communications Settings button to open the Communications Settings dialog (FIG. 37). FIG. 37 Communications Settings dialog 4. Click the NetLinx Master radio button in the Platform Selection section. MVP-9000i Modero® Wireless Touch Panel with Intercom 37 Configuring Communication 5. Click the Virtual NetLinx Master radio button in the Transport Connection Option section. 6. Click the Edit Settings button to open the Virtual NetLinx Master Settings dialog (FIG. 38). FIG. 38 Virtual NetLinx Master Settings dialog 7. Enter the System number; the default is 1. 8. Click OK on all open dialogs to save your settings. 9. Click the OnLine Tree tab in the Workspace window to view the devices on the Virtual System. 10. Right-click on Empty Device Tree/System and select Refresh System to re-populate the list. The panel will not appear as a device below the virtual system number (in the Online Tree tab) until both the system number (default = 1) is entered into the Master Connection section of the System Settings page and the panel is restarted. The System Connection status button turns green after a few seconds to indicate an active USB connection to the PC via the Virtual Master. If the System Connection icon does not turn green, check the USB connection and communication settings and refresh the system. Ethernet 1. When using Wireless Ethernet, press the listed Mode in the Master tab to toggle through the available connection modes: Connection Modes Mode Description Procedures None No connection None Auto The device connects to the first master that responds. This setting requires setting the System Number. Setting the System Number: The device connects to the specific IP of a Master via a TCP connection. This setting requires setting the Master’s IP. Setting the Master IP: The device "listens" for the Master to initiate contact. This setting requires providing the Master with the device’s IP. Confirm that the device IP is on the Master URL list. Set the Host Name on the device and use it to locate the device on the Master. Host Name is particularly useful in the DHCP scenario, where the IP address can change. URL Listen 1. Select the System Number to open the keypad. 2. Set your System Number and select Done. 1. Select the Master IP number to the keyboard. 2. Set the Master IP and select Done. 2. Select the Master Port Num. field to open the keypad and change this value. The default setting for the port is 1319. 3. Set the Master Port and select OK. 4. If you enabled password security on your Master, set the username and password within the device. 5. Select the blank field Username to open the keyboard. 38 MVP-9000i Modero® Wireless Touch Panel with Intercom Configuring Communication 6. Set the Username and select OK. 7. Select the blank field Password to open the keyboard. 8. Set the Password and select OK. 9. Press the Back button twice to return to the Status page. Master Connection to a Virtual Master via Ethernet When configuring the panel to communicate with a Virtual Master on your PC via wireless Ethernet, the Master IP/URL field must be configured to match the IP Address of the PC. Make sure to use the Virtual System value assigned to the Virtual Master within NetLinx Studio. Before beginning: 1. Verify that the panel has been configured to communicate with the Wireless Access Point and confirm that the signal strength quality bargraph is On. 2. In NetLinx Studio, select Settings > Master Communication Settings from the Main menu to open the Master Communication Settings dialog (FIG. 39). FIG. 39 Master Communications Settings dialog 3. Click the Communications Settings button to open the Communications Settings dialog (FIG. 40). FIG. 40 Communications Settings dialog 4. Click on the Virtual NetLinx Master radio button (from the Platform Selection section) to indicate that you are working as a NetLinx Master. 5. Click on the Virtual NetLinx Master radio box from the Transport Connection Option section to indicate wanting to configure the PC to communicate with a panel. Everything else, such as the Authentication, is greyed out because the procedure is not being made through the Master’s UI. MVP-9000i Modero® Wireless Touch Panel with Intercom 39 Configuring Communication 6. Click the Edit Settings button in the Communications Settings dialog to open the Virtual NetLinx Master Settings dialog (FIG. 41). IP Addresses of computer (also obtained by using the Start > Run > cmd command FIG. 41 Virtual NetLinx Master Settings dialog 7. From within this dialog, enter the System number (default is 1) and note the IP Address of the target PC being used as the Virtual Master. This IP Address can also be obtained by following these procedures: On the PC, click Start > Run to open the Run dialog. Enter cmd into the Open field and click OK to open the command DOS prompt. From the C:\> command line, enter ipconfig to display the IP Address of the PC. This information is entered into the Master IP/URL field on the panel. 8. Click OK to close the open dialogs, save the settings, and return to the main NetLinx Studio application. 9. Click the OnLine Tree tab in the Workspace window to view the devices on the Virtual System. The default System value is one. 10. Right-click on the Empty Device Tree/System entry and select Refresh System to re-populate the list. 11. Place the panel in the Table Docking Station or in the Wall Docking Station and turn the panel On. 12. After the panel powers up, press and hold down the Reset button for 6 seconds to continue with the setup process and proceed to the Setup page. 13. Select Protected Setup > Network to open the System Settings page and Master tab (FIG. 42). The System number is assigned to the Master within the AMX software application (these MUST match) When using a Virtual Master, there is no need to enter a username and/or password. Enter the IP Address information of the PC used as a Virtual Master. FIG. 42 Sample System Settings page (for Virtual Master communication) 14. Press the Mode field until the choice cycles to the word URL. By selecting URL, the System Number field becomes read-only (grey) because the panel pulls this value directly from the communicating target Master, virtual or not. A Virtual Master system value can be set within the active AMX software applications such as NetLinx Studio, TPD4, or IREdit. 15. Press the Master IP/URL field to open a Keyboard and enter the IP Address of the PC used as the Virtual Master. 40 MVP-9000i Modero® Wireless Touch Panel with Intercom Configuring Communication 16. Click OK to accept the new value and return to the System Settings page. 17. Do not alter the Master Port Number value, as this is the default value used by NetLinx. 18. Press the Back button twice to open the Status page and save your changes. MVP-9000i Modero® Wireless Touch Panel with Intercom 41 Configuring Communication Using G4 Web Control to Interact with a G4 Panel The G4 Web Control feature allows you to use a PC to interact with a G4-enabled panel via the Web. This feature works in tandem with the browser-capable NetLinx Security firmware update (build 300 or higher). Refer to the G4 Web Control Settings Page section on page 95 for more detailed field information. G4 Web Control cannot display page transitions or Dynamo images that are accelerated in hardware. Verify your NetLinx Master (ME260/64 or NI-Series) has been installed with the latest firmware KIT file from www.amx.com. Refer to the NetLinx Master instruction manual for more detailed information on the use of the new Web-based NetLinx Security. 1. From the Setup page, press the Protected button (located on the lower-left of the panel page) to open the Protected Setup page and display an on-screen keypad. 2. Press the G4 WebControl button to open the G4 Web Control Settings page (FIG. 43). FIG. 43 G4 Web Control Settings page 3. Press the G4 Web Control button until it toggles to On and turns green. 4. The Control Name field is exactly the same as the Device Name field in the Protected Setup page. 5. Press the Control Password field to open the Web Password keyboard. 6. From the Web Password keyboard, enter a unique alpha-numeric string to be assigned as the G4 Authentication session password associated with VNC web access of this panel. 7. Press OK to save all changes and return to the G4 Web Control Settings page or Abort to return to the page without saving any changes. 8. Press the Control Port field to open the Web Port Number keypad. 9. Within the keypad, enter a unique numeric value to be assigned to the port on which the VNC Web Server is running. The default value is 5900. Press OK after entering the value. 10. Press the Up/Down arrows in the Timeout section to increase or decrease the amount of time the device can remain idle with no cursor movements before the session is closed and the user is disconnected. The options are Off; 3, 5, 10, 15, and 30 minutes; and 1, 2, 3, and 4 hours. 11. Press the Back button twice to return to the Status page and save any changes. 42 MVP-9000i Modero® Wireless Touch Panel with Intercom Configuring Communication Verify that the NetLinx Master’s IP Address and System Number have been properly entered into the Master tab of the System Settings page. Using the NetLinx Master To Control the G4 Panel Refer to the particular NetLinx Master’s instruction manual for detailed information on how to download the latest firmware from www.amx.com. This firmware build enables SSL certificate identification and encryption, HTTPS communication, ICSP data encryption, and disables the ability to alter the Master security properties via a TELNET session. In order to make full use of the SSL encryption, the web browser used should incorporate an encryption feature. This encryption level is displayed as a Cipher strength. Once the Master’s IP Address has been set through NetLinx Studio version 2.x or higher: 1. Launch your web browser. 2. Enter the IP Address of the target Master (example: http://198.198.99.99) into the web browser’s Address field. 3. Press the Enter key on your keyboard to begin the communication process between the target Master and your computer. Initially, the Master Security option is disabled from within the System Security page, and no username and password is required for access or configuration. Both HTTP and HTTPS Ports are enabled by default via the Manage System > Server page. If the Master has been previously configured for secured communication, click OK to accept the AMX SSL certificate, if SSL is enabled, and then enter a valid username and password into the fields within the Login dialog. 4. Click OK to enter the information and proceed to the Master’s Manage WebControl Connections window. This page (FIG. 44) is accessed by clicking on the Manage connections link (within the Web Control section within the Navigation frame). Once activated, this page displays links to G4 panels running the latest G4 Web Control feature that were previously set up and activated on the device. Compatible devices field (showing G4 WebControl links) G4 panels Compression Options FIG. 44 Manage WebControl Connections page (populated with compatible panels) 5. Click on the G4 panel name link associated with the target panel. A secondary web browser window appears on the screen (FIG. 45). MVP-9000i Modero® Wireless Touch Panel with Intercom 43 Configuring Communication FIG. 45 Web Control VNC installation and Password entry screens 6. Click Yes from the Security Alert popup window to agree to the installation of the G4 WebControl application on your computer. This application contains the necessary Active X and VNC client applications necessary to properly view and control the panel pages from your computer. The G4 Web Control application is sent by the panel to the computer that is used for communication. Once the application is installed, this popup will no longer appear. This popup will only appear if you are connecting to the target panel using a different computer. 7. Some situations might display a Connection Details dialog (FIG. 46) requesting a VNC Server IP Address. This is the IP Address not of the Master but of the target touch panel. Depending on which method of communication is being used, it can be found in either: Wired Ethernet - System Settings > IP Settings section within the IP Address field. Wireless - Wireless Settings > IP Settings section within the IP Address field. If this field does not appear, continue to step 9. IP Address of touch panel - obtained from WiFi tab of the System Settings page (MVP-9000i) FIG. 46 Connection Details dialog 8. If a WebControl password was set up on the G4 WebControl page, a G4 Authentication Session password dialog box appears on the screen within the secondary browser window. 9. Enter the Web Control session password into the Session Password field (FIG. 46). This password was previously entered into the Control Password field within the G4 Web Control Settings page on the panel. 10. Click OK to send the password to the panel and begin the session. A confirmation message appears stating "Please wait, Initial screen loading.". 44 MVP-9000i Modero® Wireless Touch Panel with Intercom Configuring Communication The secondary window is then populated with the same G4 page being displayed on the target G4 panel. A small circle appears within the on-screen G4 panel page and corresponds to the location of the mouse cursor. A left-mouse click on the computer-displayed panel page equates to an actual touch on the target G4 panel page. MVP-9000i Modero® Wireless Touch Panel with Intercom 45 Configuring Communication 46 MVP-9000i Modero® Wireless Touch Panel with Intercom Setup Pages Setup Pages Overview The MVP-9000i features on-board Setup pages. Use the options in the Setup pages to access panel information and make various configuration changes. Accessing the Setup pages To access the Setup pages, hold the bottom left capacitive touch button and the bottom of the directional pad (FIG. 1) for 3 seconds. Release the buttons as soon as the green popup window appears. Alternately, press the Reset button on the left side of the MVP-9000i with the stylus for 6 seconds (FIG. 47). Stylus Reset button FIG. 47 Setup Page Access on the MVP-9000i The Reset button allows access to three different modes. Pressing and holding for 6 seconds opens the Setup page. Continuing to hold for a total of 9 seconds opens the Calibrate page (page 94). Holding the Reset button for 12 seconds will put the device into Shutdown Mode. Landscape and Portrait Mode Setup Pages If desired, the MVP-9000i may be switched between landscape and portrait orientation modes via the System & Panel Options page in the Protected Setup pages (page 66). Separate TPDesign4 files must be downloaded for each mode. These files are available at www.amx.com. To switch between Landscape and Portrait Mode, please refer to the System & Panel Options page section on page 66. MVP-9000i Modero® Wireless Touch Panel with Intercom 47 Setup Pages Setup Page The Setup page (FIG. 48) allows quick access to several essential panel properties: FIG. 48 MVP-9000i Setup page Features on this page include: Setup Page Back icon: The icon in the upper-left corner of each Setup page allows the user to return to the previously selected page. WiFi/Wired icon: The icon to the left of the Connection Status Icon displays whether the current connection to the Master is Wireless (image of a radio antenna) or Wired (image of three networked computers). Connection Status icon: The icon in the upper-right corner of each Setup page provides a constant visual indication of current connection status. Note: a Lock appears on the icon if the panel is connected to a secured NetLinx Master. Navigation Buttons: The buttons along on the left half of the page provide access to secondary Setup pages (see following sections). Connection Status: Displays whether the panel is has external communication, as well as the encryption status of the Master, the connection type (Ethernet or USB), and to which System the panel is connected. • The Connection Status field always displays the device number. If the device has not been established on a network, the device number will read “0”. • Until a connection is established, the message displayed is: “Attempting connection.”. • When a connection is established, the message displayed is either: “Connected via Ethernet “or “Connected via USB “. • The word “Encrypted” appears when an encrypted connection is established with a NetLinx Master. Reboot button: Press this button to reboot the panel. Shutdown button: Press this button to shut off the panel. If the panel is docked in a docking station or otherwise connected to external power, this button will be greyed out. To shut down the panel: 1. Access the Setup page. 2. Press the Shutdown button. 3. Disconnect any power source plugs or USB connections, if necessary. 48 MVP-9000i Modero® Wireless Touch Panel with Intercom Setup Pages Navigation Buttons The following Navigation buttons (FIG. 49) appear on the left side of the Setup page: FIG. 49 Navigation buttons on the Status page The six buttons include: Display: this button opens the Display page (page 50) Audio: this button opens the Audio page (page 51) Battery: this button opens the Power Management page (page 53) Time: this button opens the Date/Time page (page 55) Panel Info: this button opens the Panel Information page (page 60) Protected: this button opens the Protected Setup page (page 63) MVP-9000i Modero® Wireless Touch Panel with Intercom 49 Setup Pages Display Page The Display page controls the basic functions of the touch panel display, including the panel brightness. FIG. 50 Display page The features on this page include: Display Page Back icon: The icon in the upper-left corner of each Setup page allows the user to return to the previously selected page. WiFi/Wired icon: The icon to the left of the Connection Status Icon displays whether the current connection to the Master is Wireless (image of a radio antenna) or Wired (image of three networked computers). Connection Status icon: The icon in the upper-right corner of each Setup page provides a constant visual indication of current connection status. Note: a Lock appears on the icon if the panel is connected to a secured NetLinx Master. Panel Brightness: Sets the display brightness and contrast levels of the panel. • Press the Brightness Up/Down buttons to adjust the brightness level. Range = 0 - 100. Note: Be careful not to turn down the brightness too low to be able to see the Setup page. Inactivity Page: Indicates the length of time that the panel can remain idle before automatically flipping to a pre-selected page. • Press the Up/Down buttons to increase/decrease the Inactivity Page Flip Timeout setting. Range = 1, 2, 5, 10, 15, 30 minutes, 1, 2, 3, 4 hours. • Set the timeout value to 0 to disable Inactivity Page mode. Note: The touch panel page used for the Inactivity page flip is named within a small Inactivity Page field below the buttons. The default reading is “MAIN”. Flyout Menu: 50 This switch controls the flyout menus on the capacitive touch buttons on the left of the screen. “On” allows use of any flyout menus connected to the buttons, and “OFF” disables them. MVP-9000i Modero® Wireless Touch Panel with Intercom Setup Pages Audio Page The Audio page allows adjustment of volume levels and panel sounds settings (FIG. 51). FIG. 51 Audio pages Features on this page include: Audio Page Back: Saves all changes and returns to the previous page. WiFi/Wired icon: The icon to the left of the Connection Status Icon displays whether the current connection to the Master is Wireless (image of a radio antenna) or Wired (image of three networked computers). Connection Status icon: The icon in the upper-right corner of each Setup page provides a constant visual indication of current connection status. Note: a Lock appears on the icon if the panel is connected to a secured NetLinx Master. Button Sounds: • Activating the Hit On button plays a default sound when you touch an active button. Touch the field a second time to switch the button to Hit Off, which disables the sound. • Activating Miss On button plays a default sound when you touch a non-active button or any area outside of the active button. Touch the field a second time to switch the button to Miss Off, which disables the sound. • The Test button plays a test WAV/MP3 file over the panel’s internal speakers. Intercom Mic Level: Adjusts the volume level on the intercom’s microphone: • Use the Up/Down buttons to adjust the microphone level (range = 0 - 100%). Press the Mute On button to mute the microphone and press it again (switching the button to Mute Off) to enable it. Volume: Adjusts the volume level on the touch panel’s speaker: • Use the Up/Down buttons to adjust the speaker level (range = 0 - 100%). Press the Mute On button to mute the speaker and press it again (switching the button to Mute Off) to enable it. Master Volume: This section allows you to alter the current master volume level: • Use the Up/Down buttons to adjust the volume level in one-percent increments (range = 0 - 100%). • The Master Volume readout indicates the current volume level. Press the Up/ Down buttons to adjust the volume level in one-percent increments (range = 0 100%). • The Mute On button toggles the Mute feature. Press it again to switch it to Mute Off. MVP-9000i Modero® Wireless Touch Panel with Intercom 51 Setup Pages WAV files - Supported Sample Rates The following sample rates for WAV files are supported by MVP-9000i panels: Supported WAV Sample Rates • 48000 Hz • 16000 Hz • 44100 Hz • 12000 Hz • 32000 Hz • 11025 Hz • 24000 Hz • 8000 Hz • 22050 Hz 52 MVP-9000i Modero® Wireless Touch Panel with Intercom Setup Pages Power Management Page The options on the Power Management page allow setting of power warning preferences and battery status information, and adjustment of the display times for battery warnings (FIG. 52) FIG. 52 Power Management page Features on this page include: Power Management Page Back: Saves all changes and returns to the previous page. WiFi/Wired icon: The icon to the left of the Connection Status Icon displays whether the current connection to the Master is Wireless (image of a radio antenna) or Wired (image of three networked computers). Connection Status icon: The icon in the upper-right corner of each Setup page provides a constant visual indication of current connection status. Note: a Lock appears on the icon if the panel is connected to a secured NetLinx Master. Power Settings: Sleep The three settings in the Power Settings section may be selected by touching either the arrow to the left of each setting or by touching the entry itself. Each is highlighted with a green arrow to the left when selected. This value determines the number of seconds or minutes that need to pass before the panel automatically goes into Sleep Mode. Once asleep, the device may be awakened by touching the buttons on either side of the screen or the screen itself. Use the Up/Down arrows to change the settings; the setting bar will change from blue to green to display the percentage of minimum versus maximum. Range = 10, 15, 20, 25, 30 seconds; 5, 15, 30 minutes; 1, 2 hours Default = 2 hours Stand By This value determines the number of seconds or minutes that need to pass before the panel automatically goes into Standby Mode. Once in standby, the device may be awakened by touching the screen. Use the Up/Down arrows to change the settings; the setting bar will change from blue to yellow to display the percentage of minimum versus maximum. A value of Off disables this feature. Range = 15, 30 minutes; 1, 2, 3, 4 hours Default = Off MVP-9000i Modero® Wireless Touch Panel with Intercom 53 Setup Pages Power Management Page (Cont.) Shutdown This value determines the number of seconds or minutes that need to pass before the panel automatically shuts down. Once shut down, the device will have to be restarted. The Up/Down buttons alter the timeout value (in minutes). Use the Up/Down arrows to change the settings; the setting bar will change from blue to orange to display the percentage of minimum versus maximum. A value of Off disables this feature. Note: Shutdown mode turns the unit completely off, including communication circuits, and preserves battery life, unlike Sleep or Standby mode, which only turn off the display. From Shutdown mode, a unit may be turned on by touching the screen or applying power. Range = 3, 5, 10, 15, 30 minutes; 1, 2, 3, 4 hours Default = Off. Charge Status: The Charge Status field indicates the power charge currently available on the battery. When fully charged, the field is green and reads “Charged”. Battery Type: The Battery Type field indicates the type of battery currently installed in the MVP-9000i. The value listed is 1. Docking Station Version: The Docking Station Version field indicates the version of firmware used for the currently used Table or Wall Docking Station. This field is blank if the panel is not docked in a Docking Station. Dock Status: The Dock Status icon turns green when connected to an active Table or Wall Docking Station, and turns red when disconnected. NOTE: when using the panel’s included power source, this icon will still appear red, even if the panel is drawing power from the power source. Auto Dim: The DISABLE/DISABLED button acts as a power save feature with two options: • On - Clicking on this button activates the brightness limit set on the panel, conserving battery power. Activating this feature causes the panel to function at 10% of full brightness and overrides the Panel Brightness value set on the Setup page. • Off - Clicking on this button deactivates this power save feature. The panel will use the Panel Brightness level. When enabled, Auto Dim will engage at half the time set under the Sleep setting or after five minutes, whichever is sooner. 54 MVP-9000i Modero® Wireless Touch Panel with Intercom Setup Pages Date/Time Page The options on the Date/Time page (FIG. 53) allows setting and adjusting of time and date information on the MVP-9000i. If the time and/or date on the Master is modified, all connected devices will be updated to reflect the new information. FIG. 53 Date/Time page Features on this page include: Date/Time Page Back: Saves all changes and returns to the previous page. WiFi/Wired icon: The icon to the left of the Connection Status Icon displays whether the current connection to the Master is Wireless (image of a radio antenna) or Wired (image of three networked computers). Connection Status icon: The icon in the upper-right corner of each Setup page provides a constant visual indication of current connection status. Note: a Lock appears on the icon if the panel is connected to a secured NetLinx Master. Current Date/Time: These fields display the calendar date information in several different formats. Get Time: The Get Time button retrieves Time and Date information from the Master. Set Time: The Set Time button retains and saves any time/date modifications made on the panel. The current date and time may be retrieved from the NetLinx Master, or it may be updated manually. To retrieve the date and time from the Master: 1. From the Date/Time page, press the Get Time button. 2. The new time and date will be added. 3. Press the Back button to save the changes. If the panel is not connected to a Master, the Get Time function will not work. MVP-9000i Modero® Wireless Touch Panel with Intercom 55 Setup Pages To set the date and time manually on an MVP-9000i: 1. From the Date/Time page, press the Set Time button to open the Set Date/Time popup window (FIG. 54). 2. Touch the field to be changed to highlight it. 3. Use the Up/Down arrows to change the information in the field. 4. To return to the Date/Time page without saving any changes, press Cancel. 5. To save all changes and return to the Date/Time page, press Save. FIG. 54 Set Date/Time popup window Set Date/Time Popup Window Set Date/Time: Use the Up/Down arrow buttons to adjust the MVP-9000i’s calendar date and time. A white outline around the field indicates which field is currently selected. • Year range = 2000 - 2199 • Month range = 1 - 12 • Day range = 1 - 31 • Hour = 24-hour military • Minute range = 0 - 59 • Second range = 0 - 59 56 Cancel: Touch this button to return to the Date/Time page without saving any changes. Save: Touch this button to save all changes and return to the Date/Time page. MVP-9000i Modero® Wireless Touch Panel with Intercom Setup Pages Panel Information Page The Panel Information page includes four tabs: Info (page 57), Config (page 58), File (page 59), and Project (page 60). Panel Information Page - Info The Info tab of the Panel Information page provides detailed panel information (FIG. 55). FIG. 55 Panel Information page - Info Features on this page include: Panel Information Page - Info Back: Saves all changes and returns to the previous page. WiFi/Wired icon: The icon to the left of the Connection Status Icon displays whether the current connection to the Master is Wireless (image of a radio antenna) or Wired (image of three networked computers). Connection Status icon: The icon in the upper-right corner of each Setup page provides a constant visual indication of current connection status. Note: a Lock appears on the icon if the panel is connected to a secured NetLinx Master. Panel Type: Displays the model of the panel being used. Firmware Version: Displays the version number of the G4 firmware loaded on the panel. Serial Number: Displays the specific serial number value assigned to the panel. Setup Pages: Displays the type and version of the Setup pages being used by the panel. Panel Start Time: Displays the time taken by the panel to wake up from sleep mode. Screen Width: Displays the screen width (in pixels). MVP-9000i = 800 pixels. Screen Height: Displays the screen height (in pixels). MVP-9000i = 480 pixels. File System: Displays the amount of Compact Flash memory available on the panel. RAM: Displays the available RAM (or Extended Memory module) on the panel. Bulb Hours: Displays the number of hours elapsed with the display. MVP-9000i Modero® Wireless Touch Panel with Intercom 57 Setup Pages Panel Information Page - Config The Config tab provides information on the panel’s configuration (FIG. 56). FIG. 56 Panel Information Page - Config Features on this page include: Panel Information Page - Config Back: Saves all changes and returns to the previous page. WiFi/Wired icon: The icon to the left of the Connection Status Icon displays whether the current connection to the Master is Wireless (image of a radio antenna) or Wired (image of three networked computers). Connection Status icon: The icon in the upper-right corner of each Setup page provides a constant visual indication of current connection status. Note: a Lock appears on the icon if the panel is connected to a secured NetLinx Master. 58 Start Up String: Displays the start-up string. Wake Up String: Displays the wake up string used after an activation from a timeout. Sleep String: Displays the sleep string used during a panel’s Sleep mode. Standby String: Displays the standby string used during a panel’s Standby mode. Shutdown String: Displays the shutdown string used during a panel’s Shutdown mode. High Port: Displays the high port (port count) value for the panel. High Address: Displays the high address (address count) value for the panel. High Channel: Displays the high channel (channel count) value for the panel. High Level: Displays the high level (level count) value being used by the panel. Cradle Channel: Displays the cradle channel (channel count) value being used by the panel. Cradle Port: Displays the cradle port (port count) value for the panel. Battery Level: Displays the battery level (level count) value for the panel. Battery Port: Displays the battery port (port count) value for the panel. Power Up Page: Displays the page assigned to display after the panel is powered-up. MVP-9000i Modero® Wireless Touch Panel with Intercom Setup Pages Panel Information Page - File The File tab displays information on the particular TPDesign4 file used by the panel. FIG. 57 Panel Information page - File Features on this page include: Panel Information Page - File Back: Saves all changes and returns to the previous page. WiFi/Wired icon: The icon to the left of the Connection Status Icon displays whether the current connection to the Master is Wireless (image of a radio antenna) or Wired (image of three networked computers). Connection Status icon: The icon in the upper-right corner of each Setup page provides a constant visual indication of current connection status. Note: a Lock appears on the icon if the panel is connected to a secured NetLinx Master. File Name: The name of the TPDesign4 file currently being used for the panel. File Revision: The revision number of the TPDesign4 file, if applicable. Last Save: The last save date on the project. Creation Date: The creation date of the project. Revision Date: Displays the last revision date for the project. Build Number Displays the build number information of the TPD4 software used to create the project file. Blink Rate: Displays the feedback blink rate, in 5-second increments. MVP-9000i Modero® Wireless Touch Panel with Intercom 59 Setup Pages Panel Information Page - Project The Project tab displays the project properties of the TPDesign4 project file currently loaded on the panel (FIG. 58). FIG. 58 Panel Information page - Project Features on this page include: Panel Information Page - Project Back: Saves all changes and returns to the previous page. WiFi/Wired icon: The icon to the left of the Connection Status Icon displays whether the current connection to the Master is Wireless (image of a radio antenna) or Wired (image of three networked computers). Connection Status icon: The icon in the upper-right corner of each Setup page provides a constant visual indication of current connection status. Note: a Lock appears on the icon if the panel is connected to a secured NetLinx Master. Designer ID: Displays the designer information. Dealer ID: Displays the dealer ID number (unique to every dealer and entered in TPD4). Job Name: Displays the job name. Sales Order: Displays the sales order information. Purchase Order: Displays the purchase order information. Job Comments: Displays any comments associated to the job (from the TPD4 project file). File Name: Displays the name of the TPDesign4 project file downloaded to the panel. AMX IR Ports: Displays the AMX 38 kHz and 455 kHz IR channel port used by the IR Emitter on the panel. • This information is specified in TPD4 (Project Properties > IR Emitters & Receivers tab). • For example, if you set the AMX IR 38K Port to 7 and then put a button on the panel with a channel code of 5 and a port of 7, it will trigger the IR code in slot 5 of the AMX IR 38K Port. User IR Ports: Displays the primary channel ports used by the IR receiver on the panel. This field may display up to eight ports being used at one time. IR receivers and transmitters on G4 panels share the device address number of the panel. 60 MVP-9000i Modero® Wireless Touch Panel with Intercom Protected Setup Pages Protected Setup Pages The Protected Setup page (FIG. 59) provides secured access to advanced panel configuration options, including communication and security settings. The Protected Setup page is accessed through the Setup page (please refer to the Setup Pages section on page 47). FIG. 59 Protected Setup page showing default values To access the Protected Setup pages: 6. From the Setup page, select the Protected button on the left side of the screen. This opens the password keypad (FIG. 60). 7. Enter the factory default password (1988) into the password keypad to access the page. FIG. 60 Protected Settings page password keypad This password may be changed later through the Passwords section on page 97. MVP-9000i Modero® Wireless Touch Panel with Intercom 63 Protected Setup Pages Features on the Protected Setup page include: Protected Setup Page Back: Saves all changes and returns to the previous page. WiFi/Wired icon: The icon to the left of the Connection Status Icon displays whether the current connection to the Master is Wireless (image of a radio antenna) or Wired (image of three networked computers). Connection Status icon: The icon in the upper-right corner of each Protected Setup page provides a constant visual indication of current connection status. Note: a Lock appears on the icon if the panel is connected to a secured NetLinx Master. Navigation Buttons: The buttons along on the left side of the page provide access to secondary Protected Setup pages (see following sections). Device Number: Opens a keypad used to view or change the device number of the panel. Device Name Opens a keypad used to view or change the device name used for the panel. Options: Opens the System & Panel Options page (page 66). The nine buttons include: Network: this button opens the System Settings page (page 70) Calibration: this button opens the Calibrate page (page 94) G4 Web Control: this button opens the G4 Web Control Settings page (page 95) Passwords: this button opens the Passwords page (page 101) Logs: this button opens the Panel Logs page (page 99) Cache: this button opens the Cache Settings page (page 100) Statistics: this button opens the Panel Statistics page (page 102) Connection Test: this button opens the Connection Utility page (page 105) SIP: this button opens the SIP Settings page (page 106) Zero-Configuration Networking The MVP-9000i features a built-in zero-configuration networking client that allows you to determine the device’s IP address via a client that uses the Zero-Configuration Networking Standard. Zero-Configuration (or Zeroconf) technology provides a general method to discover services on a local area network. In essence, it allows you to set up a network without any configuration, as described below. Zero-Configuration Client You will need a Zero-Configuration client to determine the IP address of the MVP-9000i within the network. Many Zero-Configuration clients are currently available. However, for the purposes of this document, we will refer to Bonjour for Windows, which is Apple’s implementation of the Zero-Configuration Networking Standard. It is free and widely available for download. Bonjour and Bonjour for Windows are trademarks of Apple Inc., registered in the US and other countries. If you don’t already have it installed on your PC, download and install Bonjour for Windows before you begin. 1. With Bonjour for Windows running on a PC with access to the MVP-9000i’s LAN, connect the MVP9000i to the network. 2. Select the MVP-9000i from the Bonjour list of devices on the browser. 3. The browser will bring up the main touch panel page. 4. Access the Protected Setup pages, using your password if necessary. The unit’s IP address is displayed in the System Settings - Wired page in the Protected Setup pages. (For more information, please refer to System Settings - Wired section on page 72.) 5. If necessary, assign a static IP address to the panel. 64 MVP-9000i Modero® Wireless Touch Panel with Intercom Protected Setup Pages Bonjour for Windows operates as a plug-in for Microsoft Internet Explorer, and is displayed in the IE Explorer Bar. If you have installed Bonjour for Windows, but don’t see the Bonjour toolbar icon, you may need to “unlock” and expand the toolbars to see it. Accessing the MVP-9000i via Zero-Configuration From any computer or Netbook that has access to the MVP-9000i’s LAN, open a Web browser and type the IP address of the target device in the Address Bar. The default state of the MVP-9000i allows any one user with the device’s IP address to access the device. This access status may be changed by setting a password through the G4 Web Control Settings page (please refer to the G4 Web Control Settings Page section on page 95 for more information), which then prompts the user to enter the password when accessing the device. Enabling and Disabling Zero-Configuration Capability Zero-Configuration capability may also be shut off on the NMVP-9000i at any time. To enable or disable Zero-Configuration networking for the device: 1. From the Setup pages, press the Protected button and enter the Protected Setup password (page 66). 2. In the Protected Setup page, press the Options button. 3. In the System & Panel Options page, press the Zero Config toggle. This will switch back and forth between On and Off. 4. When finished, press the Back button to return to the Protected Setup page and save your change. MVP-9000i Modero® Wireless Touch Panel with Intercom 65 Protected Setup Pages System & Panel Options page Touch the Options button at the bottom of the Protected Setup page to open the System & Panel Options page (FIG. 61). FIG. 61 Protected Setup Navigation Buttons Features on the System & Panel Options page include: System & Panel Options Page Back: Saves all changes and returns to the previous page. WiFi/Wired icon: The icon to the left of the Connection Status Icon displays whether the current connection to the Master is Wireless (image of a radio antenna) or Wired (image of three networked computers). Connection Status icon: The icon in the upper-right corner of each Protected Setup page provides a constant visual indication of current connection status. Note: a Lock appears on the icon if the panel is connected to a secured NetLinx Master. Panel Options: 66 Front Btn Access • Enables or disables access to the Setup pages by holding the bottom left capacitive touch button and the bottom of the directional pad. When set to Off, the Setup pages may only be accessed through the Reset button (FIG. 2) Page Tracking: • Enables or disables the G4 page tracking feature that sends page flips to the Master via strings. Function Show: • When the Function Show feature is displayed, the Channel Port and Code will appear in yellow, the Address Port and Code in green, and the Level Port and Channel Code in purple. (Please refer to the Function Show Example section on page 67 for more information.) Telnet: • Controls access via Telnet. Zero Config: • Controls Zero Configuration access. (For more information, please refer to Setup Page section on page 48.) Table Dock Latch: • Enables and disables the docking latch on the Table Docking Station (page 11). If User Access is Enabled in the Passwords page (page 97), this switch will be greyed out. Security: • Displays one of three security settings: Standard, Secure, and DoD. Pressing this button opens a popup window allowing changes to the Security Profile. NOTE: Refer to the Security Settings section on page 68 for very important information on using this feature. MVP-9000i Modero® Wireless Touch Panel with Intercom Protected Setup Pages System & Panel Options Page (Cont.) Orientation: • Selects the orientation by which the panel pages are presented: 0° Landscape, 90° - Portrait, and 270° - Portrait. System Options: Reset Settings: • Deletes all of the current configuration parameters on the panel (including IP Addresses, Device Number assignments, Passwords, and other presets). This option invokes a Confirmation dialog, prompting you to confirm your selection before resetting the panel. Install Firmware: • This button allows you to revert the current firmware to factory default, revert to the previously installed firmware version, or to install firmware from a properly formatted USB thumb drive or microSD card. Undock Panel: • Releases the panel from the Table Docking Station (page 11) or the Wall Docking Station (page 14). Remove Pages: • Removes all TPD4 touch panel pages currently on the panel, including the pre-installed AMX Demo pages. This option invokes a Confirmation dialog, prompting you to confirm your selection before removing the panel pages. • Note that the YES button on the Confirmation dialog is disabled for 5 seconds as additional protection against accidentally resetting the panel or removing the panel pages. Install Pages: • Allows uploading of touch panel pages via USB thumb drive or microSD card. If the panel is not connected to a thumb drive or microSD card, this button will be blacked out. USB Ready: • Notes that the panel is ready to accept files via a USB device. Function Show Example When the Function Show feature is displayed, the Channel Port and Code will appear in yellow, the Address Port and Code in green, and the Level Port and Channel Code in purple. Channel Code Channel Port 0.20 BUTTON 0,8 0,50 Level Port Channel Code Address Port Address Code FIG. 62 Function Show example MVP-9000i Modero® Wireless Touch Panel with Intercom 67 Protected Setup Pages Security Settings The Security button on the System & Options page has three settings: Standard, Secure, and DoD. Pressing the button opens the Panel Security Setting popup window (FIG. 63): FIG. 63 Panel Security Setting popup window Each of the settings has different features for touch panel security: Security Profile Features Standard: • Factory default, shipped in this configuration. • Default Protected Setup Password is “1988”. • Remote login uses Telnet. Secure: • Default Protected Setup Password is “Amx1234!”. • Minimum password requirement is 8 characters with at least one numeric character. • Remote login uses SSH. • Remote login user name is “amx”. • Login failure attempt pauses 4 seconds before another login attempt is allowed. • After 3 consecutive unsuccessful SSH login attempts, login lockout is enabled for 15 minutes. • Login and logout audit logging is enabled. DoD: • Default Protected Setup Password is “Amx1234!”. • Minimum password requirement is 8 characters with at least one numeric character, one uppercase character, one lower case character, and one special character, with no duplicate adjacent characters. • Remote login uses SSH. • Remote login user name is “amx”. • Login failure attempt pauses 4 seconds before another login attempt is allowed. • After 3 consecutive unsuccessful SSH login attempts, login lockout is enabled for 15 minutes. • Login and logout audit logging is enabled. • DoD login banner is enabled. A transition from one security mode to another will reset the Protected/Web Control/ remote login password to the default value for the current security mode (please refer to the default passwords above). A transition to Secure or DoD mode will disable G4 Web Control and ZeroConf. Although the security password features are immediate, a reboot must occur for all the new security mode features to fully take effect. 68 MVP-9000i Modero® Wireless Touch Panel with Intercom Protected Setup Pages For more information on configuring AMX devices for a secure environment, please refer to the guide Security Profiles: Configuring AMX Devices For Installation Into a Secure Environment, available at www.amx.com. Installing Firmware Pressing the Install Firmware button opens a popup window that gives three options for updates and resets (FIG. 64): FIG. 64 Firmware Installation popup window If the MVP-9000i needs to be returned to its factory default firmware, press the Factory button. If you have already installed the latest available firmware version and wish to reinstall a previous version, press the Previous button. If you wish to install new firmware from a connected microSD card or external USB stick, press the New button. The MVP-9000i automatically detects connected microSD cards and USB thumb drives. If a microSD card or USB thumb drive containing firmware is not connected to the device, the New button will be greyed out. It will only be enabled if it detects a USB drive or microSD card with a .kit file in the correct directory. For more information on installing firmware upgrades, please refer to the Upgrading Firmware section on page 109. MVP-9000i Modero® Wireless Touch Panel with Intercom 69 Protected Setup Pages System Settings Page The System Settings page (FIG. 65) displays the NetLinx Master’s communication settings. This page contains four tabs: Master, Wired, WiFi, and USB. Each of these tabs is covered in a separate section. System Settings - Master The Master tab controls the method of connection to a NetLinx Master. FIG. 65 System Settings - Master Tab The elements of this page include: System Settings - Master Tab Back: Saves all changes and returns to the previous page. WiFi/Wired icon: The icon to the left of the Connection Status Icon displays whether the current connection to the Master is Wireless (image of a radio antenna) or Wired (image of three networked computers). Connection Status icon: The icon in the upper-right corner of each Protected Setup page provides a constant visual indication of current connection status. Note: a Lock appears on the icon if the panel is connected to a secured NetLinx Master. Current Connection: Displays the current connection status. Mode: Cycles between the connection modes: URL, Listen, and Auto. • URL - In this mode, enter the IP/URL, Master Port Number, and username/ password (if used) on the Master. The System Number field is read-only - the panel obtains this information from the Master. • Listen - In this mode, add the panel address into the URL List in NetLinx Studio and set the connection mode to Listen. This mode allows the Modero touch panel to “listen” for the Master’s communication signals. The System Number and Master IP/URL fields are read-only. • Auto - In this mode, enter the System Number and a username/password (if applicable). Use this mode when both the panel and the NetLinx Master are on the same Subnet and the Master has its UDP feature enabled. The Master IP/URL field is read-only. System Number: Allows entry of a system number. Default value is 0 (zero). (Available in Auto Mode Only - disabled when URL or Auto is selected) Master IP/URL Sets the Master IP or URL of the NetLinx Master. Master Port Num.: Allows entry of the port number used with the NetLinx Master. Default = 1319. (Available in URL Only - disabled when Listen or Auto is selected) 70 MVP-9000i Modero® Wireless Touch Panel with Intercom Protected Setup Pages System Settings - Master Tab (Cont.) Username: If the target Master has been previously secured, enter the alpha-numeric string (into each field) assigned to a pre-configured user profile on the Master. This profile should have the pre-defined level of access/configuration rights. Password: If the target Master has been previously secured, enter the alpha-numeric string (into each field) assigned to a pre-configured user profile on the Master. This profile should have the pre-defined level of access/configuration rights. NDP Name: Displays the name of the device connecting to the Master. MVP-9000i Modero® Wireless Touch Panel with Intercom 71 Protected Setup Pages System Settings - Wired Use the options on the Wired Tab (FIG. 66) to configure communication settings for Ethernet communication with the MVP-9000i. FIG. 66 System Settings - Wired Tab Features on this page include: System Settings - Wired Tab Back: Saves all changes and returns to the previous page. WiFi/Wired icon: The icon to the left of the Connection Status Icon displays whether the current connection to the Master is Wireless (image of a radio antenna) or Wired (image of three networked computers). Connection Status icon: The icon in the upper-right corner of each Protected Setup page provides a constant visual indication of current connection status. Note: a Lock appears on the icon if the panel is connected to a secured NetLinx Master. DHCP/STATIC: Sets the panel to either DHCP or Static communication modes. • DHCP - a temporary IP Addresses is assigned to the panel by a DHCP server. If DHCP is selected, the other IP Settings fields are disabled (see below). • Static IP is a permanent IP Address assigned to the panel. If Static IP is selected, the other IP Settings fields are enabled (see below). IP Address: This is the IP address for this panel. Subnet Mask: This is the subnet mask for this panel. Gateway: This is the gateway address for this panel. Host Name: This is the host name for this panel. Primary DNS: This is the address of the primary DNS server used by this panel for host name lookups. Secondary DNS: This is the secondary DNS address for this panel. Domain: This is a domain name to the panel for DNS look-up. MAC Address This unique address identifies the wireless Ethernet card in the panel (readonly). If the touch panel will not be used in a docking station, or if the docking station will not have network connectivity (i.e., if the docking station is being used only to charge the device), using the default DHCP setting for the wired interface is highly recommended. Configuring a static IP address on the Wired Settings page without network connectivity may lead to a loss of connection. 72 MVP-9000i Modero® Wireless Touch Panel with Intercom Protected Setup Pages System Settings - WiFi The options on the Systems Settings - WiFi tab (FIG. 67) include the wireless security methods supported by the WiFi card. These security methods incorporate WPA, WPA2, and EAP technology, some of which require the upload of unique certificate files to a target panel. Refer to the Appendix B: Wireless Technology section on page 180 for further information. FIG. 67 System Settings - WiFi Tab Features on this tab include: System Settings - WiFi Tab Back: Saves all changes and returns to the previous page. WiFi/Wired icon: The icon to the left of the Connection Status Icon displays whether the current connection to the Master is Wireless (image of a radio antenna) or Wired (image of three networked computers). Connection Status icon: The icon in the upper-right corner of each Protected Setup page provides a constant visual indication of current connection status. Note: a Lock appears on the icon if the panel is connected to a secured NetLinx Master. DHCP/STATIC: Sets the panel to either DHCP or Static communication modes. • DHCP - a temporary IP Addresses is assigned to the panel by a DHCP server. If DHCP is selected, the other IP Settings fields are disabled (see below). • Static IP is a permanent IP Address assigned to the panel. If Static IP is selected, the other IP Settings fields are enabled (see below). IP Address: This is the IP address for this panel. Subnet Mask: This is the subnetwork address for this panel. Gateway: This is the gateway address for this panel. Host Name: This is the host name for this panel. Primary DNS: This is the address of the primary DNS server used by this panel for host name lookups. Secondary DNS: This is the secondary DNS address for this panel. Domain: This is a domain name to the panel for DNS look-up. MAC Address: This unique address identifies the wireless Ethernet card in the panel (readonly). Next: Touch this button to move to the second page of the WiFi tab (page 74) MVP-9000i Modero® Wireless Touch Panel with Intercom 73 Protected Setup Pages FIG. 68 System Settings - WiFi Tab (page 2) Features on the second page of this tab include: System Settings - WiFi Tab - Page 2 Back: Saves all changes and returns to the previous page. WiFi/Wired icon: The icon to the left of the Connection Status Icon displays whether the current connection to the Master is Wireless (image of a radio antenna) or Wired (image of three networked computers). Connection Status icon: The icon in the upper-right corner of each Protected Setup page provides a constant visual indication of current connection status. Note: a Lock appears on the icon if the panel is connected to a secured NetLinx Master. 74 SSID: Displays the currently used SSID of the target AP. Mode: Displays the currently selected security mode within the Simple or Enterprise security modes. This may be changed within the Simple or Enterprise Security mode popup windows (for more information, please refer to the Security Modes section on page 76). Security Type: Displays the currently selected Security Mode: Simple or Enterprise. AP MAC: This unique address identifies the Access Point (AP) used by this panel for wireless communication (read-only). Active Roaming: The Active Roaming setting may be changed from Disabled to Enabled for 802.11b/g (1,6,11) or Enabled for 802.11a. When enabled, this allows roaming between channels 1, 6, and 11 in the "b/g" band or all available channels in the "a" band, depending on the Regulatory Domain. Channel: The RF channel being used for connection to the AP (read -only). Signal Level Value: This indicator displays a description of the signal strength of the Access Point signal. Signal Level: Provides a graphical representation of the Signal Level Value. Prev. Touch this button to return to the first page of the WiFi tab. Site Survey: Touching this button launches the Wireless Site Survey page. The options on this page allow you to detect (“sniff-out”) all APs transmitting within range of the panel’s WiFi card. Security Modes: Security for WiFi connections is available in Simple Mode or Enterprise Mode. Touch the appropriate button to open the pop-up window for each mode. MVP-9000i Modero® Wireless Touch Panel with Intercom Protected Setup Pages Some encryption and security features may or may not be supported: Wireless Security Support 802.11a/b/g WiFi card: • Open (Clear Text) • Static WEP (64-bit and 128-bit key lengths) • WPA-PSK • EAP security (with and without certificates) • AP SIte Survey Refer to the Configuring Wireless Network Access section on page 28 for more information on configuring the panel for wireless network access using the various security options. MVP-9000i Modero® Wireless Touch Panel with Intercom 75 Protected Setup Pages Security Modes The Security Modes section on the second page of the WiFi tab has two buttons: Simple and Enterprise. Pressing the Simple button opens the Wireless Security: Simple Mode popup window, which offers wireless security options suitable for most home and office environments such as Open (page 76), WEP (page 77), and WPA-PSK (page 79). For more secure options, such as for corporate environments, the Wireless Security: Enterprise Mode popup window offers EAP-LEAP (page 82), EAP-FAST (page 84), EAP-PEAP (page 86), EAP-TTLS (page 88), and EAP-TLS (page 90). Open From the Security Modes options, press the Simple button to open the Wireless Security: Simple Mode page. Scroll through the Security Type options to select Open (FIG. 69). FIG. 69 Wireless Security: Simple Mode - Open Open security does not utilize any encryption methodology, but requires an SSID (alpha-numeric) entry. This entry must match the Network Name (SSID) entry of the target AP so the panel knows what device it is using to communicate with the network. Open Settings SSID (Service Set Identifier): Opens an on-screen keyboard to enter the SSID name used on the target AP. The SSID is a unique name used by the AP, and is assigned to all panels on that network. An SSID is required by the AP before the panel is permitted to join the network. • The SSID is case sensitive and must not exceed 32 characters. • Make sure this setting is the same for all points in your wireless network. • If this field is left blank, the panel will attempt to connect to the first available AP. Save/Cancel: • Save - store the new security information, apply changes, and return to the previous page. • Cancel - discard changes and return to the previous page. Refer to the Configuring Wireless Network Access section on page 28 and the Using the Wireless Site Survey Tool section on page 30 for further details on these security options. 76 MVP-9000i Modero® Wireless Touch Panel with Intercom Protected Setup Pages WEP From the Security Modes options, press the Simple button to open the Wireless Security: Simple Mode page. Scroll through the Security Type options to select WEP (FIG. 70). FIG. 70 Wireless Security: Simple Mode - WEP WEP security requires that both a target AP be identified and an encryption method be implemented prior to establishing communication. In addition to providing Open Authentication capabilities, this page also supports Hexadecimal and ASCII keys. WEP SSID (Service Set Identifier): Opens an on-screen keyboard to enter the SSID name used on the target AP. The SSID is a unique name used by the AP, and is assigned to all panels on that network. An SSID is required by the AP before the panel is permitted to join the network. • The SSID is case sensitive and must not exceed 32 characters. • Make sure this setting is the same for all points in your wireless network. 64 /128: Cycles through the available encryption options: 64 or 128 Bit Key Size. “WEP” (Wired Equivalent Privacy) is an 802.11 security protocol designed to provide wireless security. • 64 enables WEP encryption using a 64 Bit Key Size. All packets are transmitted with their contents encrypted using the Default WEP Key. • 128 enables WEP encryption using a 128 Bit Key Size. All packets are transmitted with their contents encrypted using the Default WEP Key. • If the key is not the correct size, the system will resize it to match the number of bits required for the WEP encryption mode selected. WEP Keys: This feature provides another level of security by selecting up to four WEP Keys. Push any of the four buttons to open an on-screen keyboard. Both ASCII and HEX keys are supported. Up to four keys can be configured for both. • An ASCII key utilizes either 5 or 13 ASCII characters • A HEX key utilizes either 10 or 26 Hexidecimal characters Press Done to accept any changes and save the new value. Note: A 64-bit key will be 10 characters in length while a 128-bit key will be 26 characters in length. The length of the key entered determines the level of WEP encryption employed (64 or 128-bit). 128-bit keys may be used if supported by the internal wireless card. MVP-9000i Modero® Wireless Touch Panel with Intercom 77 Protected Setup Pages WEP (Cont.) Default Key: Cycles through the four available WEP key identifiers to select a WEP key to use. As the Default Key value is altered (through selection) the corresponding “Current Key” is displayed. Each Current Key corresponds to a WEP key. This feature is useful for accessing different networks without having to re-enter that networks’ WEP key. It is also sometimes used to set up a rotating key schedule to provide an extra layer of security. Current Key: Displays the current WEP key in use. • When working with a single panel and a single AP, manually entering the Current Key from the AP into the selected WEP Key is recommended. • When working with a single AP and multiple panels, generating a Current Key using the same passphrase on all panels and then entering the panel-produced WEP key manually into the Wireless Access Point is recommended. • Keys may also be examined by touching the key buttons and noting the keyboard initialization text. • Use the on-screen keyboard’s Clear button to erase stored key information. Authentication: Allows only one authentication mode: Open (broadcast publicly). • An Open network allows connections from any client without authentication. If WEP encryption has been enabled, the client will require the WEP key to encrypt and decrypt packets in order to communicate with the network. Save/Cancel: • Save - store the new security information, apply changes, and return to the previous page. • Cancel - discard changes and return to the previous page. Refer to the Configuring Wireless Network Access section on page 28 and the Using the Wireless Site Survey Tool section on page 30 for further details on these security options. 78 MVP-9000i Modero® Wireless Touch Panel with Intercom Protected Setup Pages WPA-PSK From the Security Modes options, press the Simple button to open the Wireless Security: Simple Mode page. Scroll through the Security Type options to select WPA-PSK (FIG. 71). FIG. 71 Wireless Security: Simple Mode - WPA-PSK WPA-PSK security is designed for environments where using WPA or WPA2 is desirable, but an 802.1x authentication server is not available. PSK connections are more secure than WEP and are simpler to configure, since they implement dynamic keys but share a key between the AP and the panel (client). Using WPA-PSK, the encryption on the AP could either be WPA or WPA2. The firmware in the panel will automatically connect to the AP using the correct encryption. The WPA encryption type is configured on the AP, not in the firmware. APs do not display “WPA” or “WPA2” on their configuration screens: WPA is normally displayed as TKIP. WPA2 is normally displayed as AES CCMP. The following fields are required: SSID and Password/Pass Phrase. Enter the SSID of the AP. Enter a pass phrase with a minimum of 8 characters and a maximum of 63. The exact same pass phrase (including capitalization) must be entered in the access point. WPA-PSK Settings SSID (Service Set Identifier): Opens an on-screen keyboard to enter the SSID name used on the target AP. The SSID is a unique name used by the AP, and is assigned to all panels on that network. An SSID is required by the AP before the panel is permitted to join the network. • The SSID is case sensitive and must not exceed 32 characters. • Make sure this setting is the same for all points in your wireless network. Password: Opens an on-screen keyboard to enter a passphrase (password). • This alpha-numeric string must use a minimum of 8 characters and a maximum of 63. • The exact pass phrase string (including capitalization) must be entered on the target AP. Save/Cancel: • Save - store the new security information, apply changes, and return to the previous page. • Cancel - discard changes and return to the previous page. Refer to the Configuring Wireless Network Access section on page 28 for details on these security options. MVP-9000i Modero® Wireless Touch Panel with Intercom 79 Protected Setup Pages Refer to the Using the Wireless Site Survey Tool section on page 30 for more information on using this tool. 80 MVP-9000i Modero® Wireless Touch Panel with Intercom Protected Setup Pages EAP Security & Server Certificates - Overview The following EAP types all support a server certificate: EAP-PEAP EAP-TTLS EAP-TLS All three of these certificate-using security methods are documented in the following sections. EAP Authentication goes a step beyond simply encrypting data transfers, but also requires that a set of credentials be validated before the client (panel) is allowed to connect to the rest of the network (FIG. 72). Please note that no user intervention is necessary during this process, as it proceeds automatically based on the configuration parameters entered into the panel. LAN 802.1x (EAP over Wireless) Client - Panel (supplicant) Authenticator (Wireless Access Point) Authentication Server (RADIUS Server) FIG. 72 EAP security method in process A server certificate file uses a certificate installed in a panel so that the RADIUS server can be validated before the panel tries to connect to it. The field name associated with this file is Certificate Authority. If a server certificate is used, it should first be downloaded into the panel and the Certificate Authority field should then be set to the name of that certificate file. No file path should be used for this setting, as all certificates are stored in a specific directory that the user cannot control or change. The most secure connection method uses a server certificate. If no server certificate will be used, this field should be left blank. If the field contains a file name, then a valid certificate file with the same file name must be previously installed on the panel. Otherwise the authentication process will fail. MVP-9000i Modero® Wireless Touch Panel with Intercom 81 Protected Setup Pages EAP-LEAP From the Security Modes options, press the Enterprise button to open the Wireless Security: Enterprise Mode page. Scroll through the Security Type options to select EAP-LEAP (FIG. 73). FIG. 73 Wireless Security: Enterprise Mode - EAP-LEAP EAP (Extensible Authentication Protocol) is an Enterprise authentication protocol that can be used in both wired and wireless network environments. EAP requires the use of an 802.1x Authentication Server, also known as a Radius server. The configuration fields described below take variable length strings as inputs. An on-screen keyboard is opened when these fields are selected. LEAP (Lightweight Extensible Authentication Protocol) was developed to transmit authentication information securely in a wireless network environment. LEAP does not use client (panel) or server (RADIUS) certificates, and is therefore one of the least secure EAP security methods. However, it can be utilized successfully by implementing sufficiently complex passwords. EAP-LEAP security is designed for wireless environments where having a client or server certificate validation scheme in place is not required, yet necessary to transmit data securely over a wireless network. EAP-LEAP SSID (Service Set Identifier): Opens an on-screen keyboard to enter the SSID name used on the target AP. The SSID is a unique name used by the AP, and is assigned to all panels on that network. An SSID is required by the AP before the panel is permitted to join the network. • The SSID is case sensitive and must not exceed 32 characters. • Make sure this setting is the same for all points in the wireless network. • With EAP security, the SSID of the AP must be entered. If it is left blank, the panel will try to connect to the first access point detected that supports EAP. However, a successful connection is not guaranteed because the detected AP may be connected to a RADIUS server, which may not support this EAP type and/or have the proper user identities configured. Identity: Opens an on-screen keyboard. Enter an EAP Identity string (used by the panel to identify itself to an Authentication (RADIUS) Server). Note: This information is similar to a username used to login to a secured server or workstation. This works in tandem with the Password string which is similar to the password entered to gain access to a secured workstation. Typically, this is in the form of a username such as jdoe@amx.com. 82 MVP-9000i Modero® Wireless Touch Panel with Intercom Protected Setup Pages Password: Opens an on-screen keyboard. Enter the network password string specified for the user entered within the Identity field (used by the panel to identify itself to an Authentication (RADIUS) Server) Note: This information is similar to the password entered to gain access to a secured workstation. EAP-LEAP (Cont.) Save/Cancel: • Save - store the new security information, apply changes, and return to the previous page. • Cancel - discard changes and return to the previous page. Refer to the EAP Authentication section on page 200 for further details on these security options. Refer to FIG. 74 for an example of how a typical EAP-LEAP system configuration page should appear. FIG. 74 EAP-LEAP sample Cisco System Security page MVP-9000i Modero® Wireless Touch Panel with Intercom 83 Protected Setup Pages EAP-FAST From the Security Modes options, press the Enterprise button to open the Wireless Security: Enterprise Mode page. Scroll through the Security Type options to select EAP-FAST (FIG. 75). FIG. 75 Wireless Security: Enterprise Mode - EAP-FAST EAP-FAST (Flexible Authentication via Secure Tunneling) security was designed for wireless environments where security and ease of setup are equally desirable. EAP-FAST uses a certificate file, however it can be configured to download the certificate automatically the first time the panel attempts to authenticate itself. Automatic certificate downloading is convenient but slightly less secure, since its the certificate is transferred wirelessly and could theoretically be “sniffed-out”. EAP-FAST SSID (Service Set Identifier): Opens an on-screen keyboard to enter the SSID name used on the target AP. The SSID is a unique name used by the AP, and is assigned to all panels on that network. An SSID is required by the AP before the panel is permitted to join the network. • The SSID is case sensitive and must not exceed 32 characters. • Make sure this setting is the same for all points in the wireless network. • With EAP security, the SSID of the AP must be entered. If it is left blank, the panel will try to connect to the first access point detected that supports EAP. However, a successful connection is not guaranteed because the detected AP may be connected to a RADIUS server, which may not support this EAP type and/or have the proper user identities configured. Identity: Opens an on-screen keyboard to enter an EAP Identity string (used by the panel to identify itself to an Authentication (RADIUS) Server). Note: This information is similar to a username used to login to a secured server or workstation. This works in tandem with the Password string which is similar to the password entered to gain access to a secured workstation. Typically, this is in the form of a username such as: jdoe@amx.com. Anonymous Identity: Opens an on-screen keyboard to enter an IT provided alphanumeric string which (similar to the username) is used as the identity, but that does not represent a real user. This information is used as a fictitious name which might be seen by sniffer programs during the initial connection and setup process between the panel and the Radius server. In this way the real identity (username) is protected. Typically, this is in the form of a fictitious username, such as anonymous@amx.com 84 MVP-9000i Modero® Wireless Touch Panel with Intercom Protected Setup Pages Password: Opens an on-screen keyboard. Enter the network password string specified for the user entered within the Identity field (used by the panel to identify itself to an Authentication (RADIUS) Server) Note: This information is similar to the password entered to gain access to a secured workstation. EAP-FAST (Cont.) Automatic PAC Provisioning: This selection toggles PAC (Protected Access Credential) Provisioning Enabled (automatic) or Disabled (manual). • If Enabled is selected, the following PAC File Location field is disabled, because the search for the PAC file is done automatically. • If Disabled is selected, the user is required to manually locate a file containing the PAC shared secret credentials for use in authentication. In this case, the IT department must create a PAC file and then transfer it into the panel using the AMX Certificate Upload application. Note: Even when automatic provisioning is enabled, the PAC certificate is only downloaded the first time that the panel connects to the RADIUS server. This file is then saved into the panel's file system and is then reused from then on. It is possible for the user to change a setting, such as a new Identity, that would invalidate this certificate. In that case, the panel must be forced to download a new PAC file. To do this, set Automatic PAC Provisioning to Disabled and then back to Enabled. This forces the firmware to delete the old file and request a new one. PAC File Location: This field is used when the previous Automatic PAC Provisioning option has been Disabled. • When pressed, the panel displays an on-screen PAC File Location keyboard which allows you to enter the name of the file containing the PAC shared secret credentials for use in authentication. • This field is only valid when the automatic PAC provisioning feature has been enabled via the previous field. Auto Key Renewal: • Select between NEVER, 1 Day, 3 Days, 7 Days, 14 Days, and 30 Days. Save/Cancel: • Save - store the new security information, apply changes, and return to the previous page. • Cancel - discard changes and return to the previous page. Refer to the EAP Authentication section on page 200 and the Using the Wireless Site Survey Tool section on page 30 for further details on these security options. MVP-9000i Modero® Wireless Touch Panel with Intercom 85 Protected Setup Pages EAP-PEAP From the Security Modes options, press the Enterprise button to open the Wireless Security: Enterprise Mode page. Scroll through the Security Type options to select EAP-PEAP (FIG. 76). FIG. 76 Wireless Security: Enterprise Mode - EAP-PEAP PEAP (Protected Extensible Authentication Protocol) was developed as a way to securely transmit authentication information, such as passwords, over a wireless network environment. PEAP uses only serverside public key certificates and therefore does not need a client (panel) certificate which makes the configuration and setup easier. There are two main versions of the PEAP protocol supported by panel’s DeviceScape Wireless Client: PEAPv0 PEAPv1 PEAP uses inner authentication mechanisms supported by the DeviceScape Wireless Client, the most common of which are: MSCHAPv2 with PEAPv0 GTC with PEAPv1 EAP-PEAP security is designed for wireless environments where it is necessary to transmit data securely over a wireless network. EAP-PEAP SSID (Service Set Identifier): Opens an on-screen keyboard to enter the SSID name used on the target AP. The SSID is a unique name used by the AP, and is assigned to all panels on that network. An SSID is required by the AP before the panel is permitted to join the network. • The SSID is case sensitive and must not exceed 32 characters. • Make sure this setting is the same for all points in the wireless network. • With EAP security, the SSID of the AP must be entered. If it is left blank, the panel will try to connect to the first access point detected that supports EAP. However, a successful connection is not guaranteed because the detected AP may be connected to a RADIUS server, which may not support this EAP type and/or have the proper user identities configured. 86 MVP-9000i Modero® Wireless Touch Panel with Intercom Protected Setup Pages Identity: Opens an on-screen keyboard to enter an EAP Identity string (used by the panel to identify itself to an Authentication (RADIUS) Server). Note: This information is similar to a username used to login to a secured server or workstation. This works in tandem with the Password string, which is similar to the password entered to gain access to a secured workstation. Typically, this is in the form of a username such as jdoe@amx.com. EAP-PEAP Settings (Cont.) Password: Opens an on-screen keyboard to enter the network password string specified for the user entered within the Identity field (used by the panel to identify itself to an Authentication (RADIUS) Server) Note: This information is similar to the password entered to gain access to a secured workstation. Certificate Authority: When pressed, the panel displays an on-screen Certificate Authority (CA) File Location keyboard, which allows you to enter the name of the certificate authority file which is used to validate the server certificate.This field is optional. If a server certificate is used, it should first be downloaded into the panel and the Certificate Authority field should then be set to the name of that certificate file. No file path should be used for this setting as all certificates are stored in a specific directory that the user cannot control or change. Use the on-screen keyboard’s Clear button to erase completely any previously stored network path information. PEAP Version: When pressed, this field cycles through the choices of available PEAP: PEAPv0, PEAPv1, or PEAPv1 w/peaplabel=1. Inner Authentication Type: When pressed, this field cycles through the choices of available Inner Authentication mechanisms supported by the Devicescape Secure Wireless Client. The most commonly used are: MSCHAPv2 and GTC. • MSCHAPv2 (used with PEAPv0) • GTC (used with PEAPv1) • OTP • MD5 Save/Cancel: • Save - store the new security information, apply changes, and return to the previous page. • Cancel - discard changes and return to the previous page. Refer to the EAP Authentication section on page 200 and the Using the Wireless Site Survey Tool section on page 30 for further details on these security options. MVP-9000i Modero® Wireless Touch Panel with Intercom 87 Protected Setup Pages EAP-TTLS From the Security Modes options, press the Enterprise button to open the Wireless Security: Enterprise Mode page. Scroll through the Security Type options to select EAP-TTLS (FIG. 77). FIG. 77 Wireless Security: Enterprise Mode - EAP-TTLS TTLS (EAP Tunneled Transport Layer Security) is an authentication method that does not use a client certificate to authenticate the panel. However. this method is more secure than PEAP because it does not broadcast the identity of the user. Setup is similar to PEAP, but differs in the following areas: An anonymous identity must be specified until the secure tunnel between the panel and the Radius server is setup to transfer the real identity of the user. There is no end-user ability to select from the different types of PEAP. Additional Inner Authentication choices are available to the end-user. EAP-TTLS security is designed for wireless environments where the Radius server needs to validate directly the identity of the client (panel) before allowing it access to the network. This validation is done by tunneling a connection through the AP and directly between the panel and the Radius server. Once the client is identified and then validated, the Radius server disconnects the tunnel and allows the panel to access the network directly via the target AP. EAP-TTLS SSID (Service Set Identifier): Opens an on-screen keyboard to enter the SSID name used on the target AP. The SSID is a unique name used by the AP, and is assigned to all panels on that network. An SSID is required by the AP before the panel is permitted to join the network. • The SSID is case sensitive and must not exceed 32 characters. • Make sure this setting is the same for all points in the wireless network. • With EAP security, the SSID of the AP must be entered. If it is left blank, the panel will try to connect to the first access point detected that supports EAP. However, a successful connection is not guaranteed because the detected AP may be connected to a RADIUS server, which may not support this EAP type and/or have the proper user identities configured. 88 MVP-9000i Modero® Wireless Touch Panel with Intercom Protected Setup Pages Identity: Opens an on-screen keyboard. Enter an EAP Identity string (used by the panel to identify itself to an Authentication (RADIUS) Server). Note: This information is similar to a username used to login to a secured server or workstation. This works in tandem with the Password string which is similar to the password entered to gain access to a secured workstation. Typically, this is in the form of a username such as: jdoe@amx.com. EAP-TTLS (Cont.) Anonymous Identity: Opens an on-screen keyboard. Enter an IT provided alpha-numeric string which (similar to the username) used as the identity, but that does not represent a real user. This information is used as a fictitious name which might be seen by sniffer programs during the initial connection and setup process between the panel and the Radius server. In this way the real identity (username) is protected. Typically, this is in the form of a fictitious username such as: anonymous@amx.com Password: Opens an on-screen keyboard. Enter the network password string specified for the user entered within the Identity field (used by the panel to identify itself to an Authentication (RADIUS) Server) Note: This information is similar to the password entered to gain access to a secured workstation. Certificate Authority: When pressed, the panel displays an on-screen Certificate Authority (CA) File Location keyboard which allows you to enter the name of the certificate authority file which is used to validate the server certificate. This field is optional. If a server certificate is used, it should first be downloaded into the panel and the Certificate Authority field should then be set to the name of that certificate file. No file path should be used for this setting as all certificates are stored in a specific directory that the user cannot control or change. Use the on-screen keyboard’s Clear button to completely erase any previously stored network path information. Inner Authentication Type: When pressed, this field cycles through the choices of available Inner Authentication mechanism supported by the Devicescape Secure Wireless Client: • EAP-MSCHAPv2 • EAP-GTC • EAP-OTP • EAP-MD5 • MSCHAPv2 • MSCHAP • PAP • CHAP Save/Cancel: • Save - store the new security information, apply changes, and return to the previous page. • Cancel - discard changes and return to the previous page. Refer to the EAP Authentication section on page 200 and the Using the Wireless Site Survey Tool section on page 30 for further details on these security options. MVP-9000i Modero® Wireless Touch Panel with Intercom 89 Protected Setup Pages EAP-TLS From the Security Modes options, press the Enterprise button to open the Wireless Security: Enterprise Mode page. Scroll through the Security Type options to select EAP-TLS (FIG. 78). FIG. 78 Wireless Security: Enterprise Mode - EAP-TLS TLS (Transport Layer Security) was the original standard wireless LAN EAP authentication protocol. TLS requires additional work during the deployment phase, but provides additional security since even a compromised password is not enough to break into an EAP-TLS protected wireless network environment. EAP-TLS security is designed for wireless environments where it is necessary to securely transmit data over a wireless network by adding an additional level of security protocol via the use of a private key. EAP-TLS SSID (Service Set Identifier): Opens an on-screen keyboard for entering the SSID name used on the target AP. The SSID is a unique name used by the AP, and is assigned to all panels on that network. An SSID is required by the AP before the panel is permitted to join the network. • The SSID is case sensitive and must not exceed 32 characters. • Make sure this setting is the same for all points in the wireless network. • With EAP security, the SSID of the AP must be entered. If it is left blank, the panel will try to connect to the first access point detected that supports EAP. However, a successful connection is not guaranteed because the detected AP may be connected to a RADIUS server, which may not support this EAP type and/or have the proper user identities configured. Identity: Opens an on-screen keyboard for entering an EAP Identity string (used by the panel to identify itself to an Authentication (RADIUS) Server). Note: This information is similar to a username used to login to a secured server or workstation. This works in tandem with the Password string, which is similar to the password entered to gain access to a secured workstation. Typically, this is in the form of a username such as: jdoe@amx.com. 90 MVP-9000i Modero® Wireless Touch Panel with Intercom Protected Setup Pages Certificate Authority: When pressed, the panel displays an on-screen Certificate Authority (CA) File Location keyboard, for entering the name of the certificate authority file which is used to validate the server certificate. This field is optional. If a server certificate is used, it should first be downloaded into the panel and the Certificate Authority field should then be set to the name of that certificate file. No file path should be used for this setting, as all certificates are stored in a specific directory that the user cannot control or change. • Use the on-screen keyboard’s Clear button to completely erase any previously stored network path information. EAP-TLS (Cont.) Client Certificate: Opens an on-screen keyboard for entering the name of the file containing the client (panel) certificate for use in certifying the identity of the client (panel). • Refer to the Client Certificate Configuration section on page 92 for information regarding Client Certificates and their parameters. Private Key: When pressed, the panel displays an on-screen Client Private Key File Location keyboard for entering the name of the file containing the private key. • Use the on-screen keyboard’s Clear button to completely erase any previously stored network path information. Private Key password: This field should only be used if the Private Key is protected with a password. If no password protection is associated with the Private Key, then this field should be left blank. • When pressed, the panel displays an on-screen Private Key Password keyboard which allows you to enter an alpha-numeric password string. • Use the on-screen keyboard’s Clear button to completely erase any previously stored network path information. Save/Cancel: • Save - store the new security information, apply changes, and return to the previous page. • Cancel - discard changes and return to the previous page. Refer to the EAP Authentication section on page 200 for further details on these security options. Refer to the Using the Wireless Site Survey Tool section on page 30 for more information on using this feature. MVP-9000i Modero® Wireless Touch Panel with Intercom 91 Protected Setup Pages Client Certificate Configuration A client certificate can be configured by an IT department in several ways. The client certificate and private key can both be incorporated into one file or split into two separate files. In addition, the file format used by these files could be PEM, DER, or PKCS12. These formats are described later in this section. The following table describes how to fill in the fields for each possible case. Client Certificate Configuration Certificate Configuration Client Certificate Field Private Key Field Single file contains both the client certificate and the private key. Format is: PEM or DER. Enter the file name Enter the same file name First file contains the client certificate, second file contains the private key. Format is: PEM or DER. Enter the first file name Enter the second file name Single file contains both the client certificate and the private key. Format is: PKCS12 Leave this field blank Enter the file name First file contains the client certificate, second file contains the private key. Format is: PKCS12 Not supported Not supported AMX supports the following security certificates PEM (Privacy Enhanced Mail) DER (Distinguished Encoding Rules) PKCS12 (Public Key Cryptography Standard #12) PKCS12 files are frequently generated by Microsoft certificate applications. Otherwise, PEM is more common. Certificate files frequently use 5 file extensions. It can be confusing because there is not a one to one correspondence. The following table shows the possible file extension used for each certificate type: Certificates and their Extensions Certificate Type PEM Possible File Extensions .cer .pem .pvk DER .cer .der PKCS12 .pfx Please note which certificate types are supported by the different certificate fields used on the configuration screens (PEAP, TTLS, and TLS). The following table outlines the firmware fields and their supported certificate types. Certificate Types Supported by the Modero Firmware Configuration Field Name Certificate File Type Supported Certificate Authority field 92 PEM and DER MVP-9000i Modero® Wireless Touch Panel with Intercom Protected Setup Pages Client Certificate field PEM and DER Private Key field .PEM, DER, and PKCS12 System Settings - USB This tab controls the ability for the MVP-9000i to connect to a network via a USB connection. FIG. 79 System Settings page - USB tab The features on the USB tab include: System Settings - USB Tab Back: Saves all changes and returns to the previous page. WiFi/Wired icon: The icon to the left of the Connection Status Icon displays whether the current connection to the Master is Wireless (image of a radio antenna) or Wired (image of three networked computers). Connection Status icon: The icon in the upper-right corner of each Protected Setup page provides a constant visual indication of current connection status. Note: a Lock appears on the icon if the panel is connected to a secured NetLinx Master. IP Address: Displays the secondary IP address for the panel. The last series of digits may be edited, with a host number added between 2 and 254. Subnet Mask Displays the subnet mask address for the panel. MVP-9000i Modero® Wireless Touch Panel with Intercom 93 Protected Setup Pages Calibrate Page The Calibrate page (FIG. 80) allows you to calibrate the touch panel for accurate button selection. FIG. 80 Calibrate page 1. From the Protected Setup page, touch the Calibration button to open the Calibrate page. The Calibrate page may also be accessed by holding the lower left capacitive touch button and the directional pad for 6 seconds, or by pressing the Reset button on the left side of the device for 9 seconds. 2. Press the crosshairs in turn. If the crosshairs are not touched within ten seconds, the MVP-9000i will return to the Protected Setup page. 3. The page will read "Calibration Successful. Touch to continue." Touch anywhere on the screen to return to the Protected Setup page. If the screen is not touched at that point, the device will automatically return to the Protected Setup page within 10 seconds. Always calibrate the panel before its initial use, and after downloading new firmware. The Calibrate page may also be accessed by pressing down and holding the Reset button on the side of the panel for 9 seconds. For more information, please refer to the Accessing the Setup pages section on page 47. 94 MVP-9000i Modero® Wireless Touch Panel with Intercom Protected Setup Pages G4 Web Control Settings Page An on-board VNC (Virtual Network Computing) server allows the panel to connect to any remote PC running a VNC client. Once connected, the client can view and control the panel remotely. The options on this page allow you to enable/disable G4 Web Control functionality(FIG. 81). FIG. 81 G4 Web Control Settings page Features on this page include: G4 Web Control Settings Page Back: Saves all changes and returns to the previous page. WiFi/Wired icon: The icon to the left of the Connection Status Icon displays whether the current connection to the Master is Wireless (image of a radio antenna) or Wired (image of three networked computers). Connection Status icon: The icon in the upper-right corner of each Protected Setup page provides a constant visual indication of current connection status. Note: a Lock appears on the icon if the panel is connected to a secured NetLinx Master. G4 Web Control: The G4 Web Control button toggles between the two G4 activation settings: • Off - deactivates G4 Web Control on the panel. • On - activates G4 Web Control on the panel. Timeout: Sets the length of time (in minutes) that the panel can remain idle, detecting no cursor movements, before the G4 Web Control session is terminated. • Minimum value = Off (panel never times out) • Maximum value = 4 h (panel times out after 4 hours) Control Name: Use this field to enter a unique alpha-numeric string to be used as the panel’s display name within the Manage WebControl Connections window of the NetLinx Security browser window. MVP-9000i Modero® Wireless Touch Panel with Intercom 95 Protected Setup Pages Control Password: Use this field to enter the G4 Authentication session password required for VNC access to the panel. Control Port: Use this field to enter the number of the port used by the VNC Web Server. Default = 5900. Max Connects: Displays the maximum number of users that can be simultaneously connected to this panel via VNC. Default = 1. Connect Count: Displays the number of users currently connected to this panel via VNC. Default = 1. Refer to the Using G4 Web Control to Interact with a G4 Panel section on page 42 for instructions on using the G4 Web Control page with the web-based NetLinx Security application. The panel MUST be rebooted to save changes made on this page. 96 MVP-9000i Modero® Wireless Touch Panel with Intercom Protected Setup Pages Passwords The options on the Passwords page (FIG. 82) allow assignment of passwords required for users to access the Protected Setup page, and to release the device from a Table or Wall Docking Station. FIG. 82 Passwords page Features on this page include: Passwords Page Back: Saves all changes and returns to the previous page. WiFi/Wired icon: The icon to the left of the Connection Status Icon displays whether the current connection to the Master is Wireless (image of a radio antenna) or Wired (image of three networked computers). Connection Status icon: The icon in the upper-right corner of each Protected Setup page provides a constant visual indication of current connection status. Note: a Lock appears on the icon if the panel is connected to a secured NetLinx Master. In Panel Password Change: Accesses the alphanumeric values associated to particular password sets. • The PASSWORD 1, 2, 3, 4 and 5 (protected) buttons open a keyboard to enter alphanumeric values associated to the selected password group. Note: Clearing Password #5 removes the need to enter a password before accessing the Protected Setup page. User Access: Use these buttons to access and modify the user name/password combinations required for removing the panel from a docking station. The number of user access passwords on the panel is limited only by the amount of storage memory available. Use the UP/DN buttons to scroll through the list of saved User Access user names and passwords. NOTE: Enabling User Access disables and greys out the Table Dock Latch option on the System & Panel Options page (page 66). MVP-9000i Modero® Wireless Touch Panel with Intercom 97 Protected Setup Pages Enable/Enabled: The Enable button allows you to toggle between activating or deactivating the MVP panel requirement of a user to enter a pre-defined password before removing the panel from a connected docking station: • Off - does not prompt the user for a password, the docking station just releases the panel when the security release pushbutton is pressed. • On - requires that a valid password from the User Access list be entered before removing a panel from a docking station. Report: The Report button enables/disables reporting the panel’s docking status to the Master. To change a previously established password: 1. In the Password Settings page, press the button in the In Panel Password Change section for the particular password to be changed. Password 5 is protected, and can only be changed by the Administrator. 2. In the Password keyboard, enter the new alphanumeric password. 3. Press Done when complete. Only one of the main passwords may be used to access the Protected Settings page. An individual user password may not be used to access the Protected Settings page unless it matches one of the main passwords. To list a new user within the User Access section: 1. Press a blank button in the User Access section. 2. In the Name keyboard, enter the user’s name or nickname and press Done when finished. 3. In the Password keyboard, enter the selected alphanumeric password and press Done when finished. 4. The new user’s name will appear in the left column of User Access section. The password will also appear in the right column, but its characters will be replaced with asterisks. No matter how many characters are in an actual password, the Password column in the User Access section will always show five asterisks. To change a User Access password: 1. Press the button corresponding to the user’s name in the User Access section. 2. In the Password keyboard, enter the user’s password and press Done. 3. Press the password button in the right column of the User Access section. 4. Enter the new password into the Password keyboard and press Done. To send undocking reports to the Master: 1. From the Password Settings page, press the Report button to enable it. The MVP-9000i will send a report to the Master of undockings in the form of an "undock- " string. For more information on removing an MVP-9000i from a MVP-WDS-9 Docking Station, please refer to the Unlocking the Touch Panel section on page 15. 98 MVP-9000i Modero® Wireless Touch Panel with Intercom Protected Setup Pages Panel Logs Page The Panel Logs page (FIG. 83) chronicles all previous connections between the device and the network FIG. 83 Panel Logs Page The features on this page include: Panel Logs Page Back: Saves all changes and returns to the previous page. WiFi/Wired icon: The icon to the left of the Connection Status Icon displays whether the current connection to the Master is Wireless (image of a radio antenna) or Wired (image of three networked computers). Connection Status icon: The icon in the upper-right corner of each Protected Setup page provides a constant visual indication of current connection status. Note: a Lock appears on the icon if the panel is connected to a secured NetLinx Master. Clear: Clears all connection logs. Refresh: Refreshes displayed log information. Page: Displays the current log page number. Use the Up/Down arrows to select log pages. MVP-9000i Modero® Wireless Touch Panel with Intercom 99 Protected Setup Pages Cache Settings Page The options on the Cache Settings page (FIG. 84) allow setting and clearing of the flash memory cache, as well as viewing the status of the current cache settings. The G4 graphics engine caches images to decrease load time of previously viewed images. RAM caching is always enabled, and both static and dynamic images are stored in the RAM cache as they are viewed. The size of RAM cache is automatically configured to take into account available memory versus memory that may be needed by the panel later. As the RAM cache approaches its maximum size, the oldest items in the cache may be discarded to make room for newer items. If Flash caching is enabled, dynamic images that would have been discarded will actually be moved to Flash, since retrieving images on Flash is typically faster than across a network, although it is slower than using a RAM cache. Note that since static images are already stored on Flash, they are never moved to the Flash cache, so Flash caching applies only to dynamic images. Images in Flash cache are moved back to RAM cache the next time they are viewed. As the Flash cache approaches its maximum size, the least recently used items may be discarded to make room for new items. FIG. 84 Cache Settings Page The features on this page include: Cache Settings Page Back: Saves all changes and returns to the previous page. WiFi/Wired icon: The icon to the left of the Connection Status Icon displays whether the current connection to the Master is Wireless (image of a radio antenna) or Wired (image of three networked computers). Connection Status icon: The icon in the upper-right corner of each Protected Setup page provides a constant visual indication of current connection status. Note: a Lock appears on the icon if the panel is connected to a secured NetLinx Master. Image Cache Status 100 RAM Max Size: The maximum size allocated to the RAM cache. RAM Size: The size of the current RAM cache contents. MVP-9000i Modero® Wireless Touch Panel with Intercom Protected Setup Pages RAM Hit Rate: The percentage of recent image requests satisfied by accessing the RAM cache. RAM Items: The total number of cached images in the RAM cache. Flash Size: The size of the current Flash cache contents. Flash Hit Rate: The percentage of dynamic image requests not satisfied by accessing the RAM cache, but satisfied by accessing the Flash cache. Flash Items: The total number of cached images in the Flash cache. Image Cache Settings Flash Cache Size: Use the Up/Down buttons to increase or decrease the total size of the flash memory cache. The maximum varies based on free Flash space. Cache Settings Page (Cont.) Cache Expires: Use the Up/Down buttons to control the amount of time elapsed before the panel automatically deletes its cache, with increments of 2 hours, 8 hours, 1 day, 2 days, 5 days, and "NEVER". Clear Cache: Clears the contents of both the RAM and Flash caches. On/Off: Saves any changes made to the Flash Cache Size or Cache Expires fields. MVP-9000i Modero® Wireless Touch Panel with Intercom 101 Protected Setup Pages Panel Statistics Page The Panel Statistics page (FIG. 85) displays activity between the device and the network. The page contains four tabs: ICSP, Blink, IP, and Wireless. in proportions of ICSP messages, blink messages, and Ethernet versus wireless use. Panel Statistics - ICSP The ICSP tab collects the number of ICSP messages received by the device. FIG. 85 Panel Statistics - ICSP Tab The features on this tab include: Panel Statistics - ICSP Tab Back: Saves all changes and returns to the previous page. WiFi/Wired icon: The icon to the left of the Connection Status Icon displays whether the current connection to the Master is Wireless (image of a radio antenna) or Wired (image of three networked computers). Connection Status icon: The icon in the upper-right corner of each Protected Setup page provides a constant visual indication of current connection status. Note: a Lock appears on the icon if the panel is connected to a secured NetLinx Master. Total: Received: Lists the number of ICSP messages received since the last time the page was cleared. Processed: Lists the number of ICSP messages processed since the last time the page was cleared. Dropped: Lists the number of ICSP messages dropped since the last time the page was cleared. Last 15 minutes: Received: 102 Lists the number of ICSP messages received within the previous 15 minutes. MVP-9000i Modero® Wireless Touch Panel with Intercom Protected Setup Pages Processed: Lists the number of ICSP messages processed within the previous 15 minutes. Dropped: Lists the number of ICSP messages dropped within the previous 15 minutes. Clear: Clears all fields on the ICSP tab. Refresh: Refreshes all data on the ICSP tab. Panel Statistics - Blinks Tab The Blinks tab (FIG. 86) collects the number of blink messages received by the device. FIG. 86 Panel Statistics - Blinks Tab Features on this tab include: Panel Statistics - Blinks Tab Back: Saves all changes and returns to the previous page. WiFi/Wired icon: The icon to the left of the Connection Status Icon displays whether the current connection to the Master is Wireless (image of a radio antenna) or Wired (image of three networked computers). Connection Status icon: The icon in the upper-right corner of each Protected Setup page provides a constant visual indication of current connection status. Note: a Lock appears on the icon if the panel is connected to a secured NetLinx Master. Total: Received: Lists the number of blink messages received since the last time the page was cleared. Missed: Lists the number of blink messages missed since the last time the page was cleared. Last 15 Minutes: Received: Lists the number of blink messages missed within the last 15 minutes. Missed: Lists the number of blink messages missed within the last 15 minutes. Clear: Clears all fields on the Blinks tab. Refresh: Refreshes all data on the Blinks tab. MVP-9000i Modero® Wireless Touch Panel with Intercom 103 Protected Setup Pages Panel Statistics - IP Tab The IP tab (FIG. 87) displays received and transmitted IP packets. Touch the Refresh button to refresh the page with its current values. FIG. 87 Panel Statistics - IP Tab Panel Statistics - Wireless Tab The Wireless tab (FIG. 87) displays the MVP-9000i’s wireless access statistics, including the wireless mode, the frequency used, and the latest used access point. Touch the Refresh button to return the counters to their placement before the latest update. FIG. 88 Panel Statistics - Wireless Tab 104 MVP-9000i Modero® Wireless Touch Panel with Intercom Protected Setup Pages Connection Utility Page The Connection Utility page (FIG. 89) displays the current wired and wireless connection information, including the latest link quality and signal strength information. FIG. 89 Connection Utility Page Connection Utility Page Back: Saves all changes and returns to the previous page. WiFi/Wired icon: The icon to the left of the Connection Status Icon displays whether the current connection to the Master is Wireless (image of a radio antenna) or Wired (image of three networked computers). Connection Status icon: The icon in the upper-right corner of each Protected Setup page provides a constant visual indication of current connection status. Note: a Lock appears on the icon if the panel is connected to a secured NetLinx Master. Master IP: The IP address for the network’s Master. Wired IP: The IP address used by the device for wired connections. Wireless IP: The IP address used by the device for wireless connections. WAP MAC: The AP’s MAC address. SSID: Displays the currently used SSID of the target AP. Channel: The channel being used for the current connection. Signal Level Value: Displays the current value of the target AP signal. Signal Level: Displays the current strength of the target AP signal. Messages Sent: Lists the number of queries sent to the AP. Responses Received: Lists the number of responses received from the AP. Responses Missed: Lists the number of responses missed by the AP. MVP-9000i Modero® Wireless Touch Panel with Intercom 105 Protected Setup Pages SIP Settings Page The options on the SIP Settings page (FIG. 90) enable you to establish network settings for using your touch panel as an IP phone. With a CSG SIP Communications Gateway (FG2182-01, -02, -03), you can use your touch panel to make and receive local, long distance, and international phone calls, and have access to phone features like call waiting, caller ID, call forwarding, call queuing, and voice mail. Setting up your touch panel as a telephone requires that you set it up as one in the CSG SIP Communications Gateway. Refer to the CSG SIP Communications Gateway Operation/Reference Guide for information on setting up your touch panel to work as a telephone. FIG. 90 SIP Settings page You may need to load a Duet module to enable the touch panel to receive SIP calls. The Duet module translates between the standard interface and the device protocol. It parses the buffer for responses from the device, sends strings to control the device, and receives commands from the UI module or telnet sessions. Refer to the documentation supplied with the Duet Module for more details. A sample UI module is provided in the module package. It is not intended to cover every possible application, but can be expanded as needed by a dealer to meet the requirements of a particular installation. Features on this page include: SIP Settings Page 106 Back: Saves all changes and returns to the previous page. WiFi/Wired icon: The icon to the left of the Connection Status Icon displays whether the current connection to the Master is Wireless (image of a radio antenna) or Wired (image of three networked computers). MVP-9000i Modero® Wireless Touch Panel with Intercom Protected Setup Pages Connection Status icon: The icon in the upper-right corner of each Setup page shows online/offline state of the panel to the master. • Bright red - disconnected • Bright green - connected. Blinks when a blink message is received to dark green every 5 seconds for half a second then go back to bright green. • Bright yellow - panel missed a blink message from the master. It will remain yellow for 3 missed blink messages and then turn red. It will return to green when a blink message is received. Note: A lock appears on the icon if the panel is connected to a secured NetLinx Master. Enable: This option enables the SIP Stack on startup. If you disable this option, the panel will not attempt to read the rest of the configuration and will not register with a proxy server. However, point-to-point SIP will still be enabled allowing for existing intercom functionality. Status: This option displays whether you are connected to the proxy server. SIP Settings Page (Cont.) Gateway Address: This option enables you to enter the IP address or DNS name of the proxy server that you want to use to register. Port Number: The option displays the port you use to connect to the proxy server. The standard SIP port is 5060, but some providers use different ports. STUN Address: This option enables you to enter the IP address or DNS name of the Simple Traversal of UDP through NATs (STUN) server. This field is optional. Local Domain: This is the realm used for authentication. This field is optional. User Name: This option enables you to enter the user name used for authentication to the proxy server. Normally, the user name is the same as the phone number assigned to the extension you are using. This field is optional. Password: This option enables you to enter the password for the user at the proxy server. This field is optional. Cancel/Save: Touch the Cancel button to return to the Protected Setup page without saving any changes made on the SIP Settings page. Touch the Save button to save the changes and return to the Protected Setup page. MVP-9000i Modero® Wireless Touch Panel with Intercom 107 Protected Setup Pages 108 MVP-9000i Modero® Wireless Touch Panel with Intercom Upgrading Firmware Upgrading Firmware Overview Programming the MVP-9000i requires the use of the latest versions of NetLinx Studio and TPDesign 4, both available from www.amx.com. The MVP-9000i uses a native RNDIS USB driver for USB-over-Ethernet communication. When the device is connected to the downloading computer (see instructions below for more details), it creates a new LAN connection, and the user will need to supply a static IP address for this to be enabled. To enter a static IP address, the user must edit the properties of the TCP/IP interface of the connection itself. This driver is included in the installation of the latest version of NetLinx Studio, available from www.amx.com. Upgrading Firmware via USB stick or MicroSD card Firmware and TPDesign 4 file downloads may be made via microSD card, using the microSD port on the left side of the device, or they may be made via USB stick. The MVP-9000i uses the CC-MINIUSB Mini USB to PC Cable Adapter (FG5967-20) for programming, firmware updates, and touch panel file transfer between a PC and the target device (FIG. 91). If a programming cable is not available, it may be purchased from www.amx.com. The Mini-USB port for the connector is located on the left side of the device as viewed from the front. FIG. 91 CC-MINIUSB MiniUSB to PC Cable Adapter To upgrade the firmware on the MVP-9000i to the latest version: 1. Download the latest MVP-9000i firmware from www.amx.com and save it to a microSD card or USB stick. The firmware must be in a directory called “MVP-9000i,” saved at the root of the microSD card or USB stick directory, to be recognized by the touch panel. 2. If using a USB stick for uploading, connect the male plug of CC-MINIUSB Cable Adapter to the miniUSB port on the MVP-9000i, and then connect the USB stick to the female USB port. If using a microSD card, insert the card into the slot on the left of the device. 3. Turn on the MVP-9000i and allow it to boot up. For best results, connect the panel to its power source or place it in a Table or Wall Docking Station. MVP-9000i Modero® Wireless Touch Panel with Intercom 109 Upgrading Firmware 4. If the panel boots up and detects a KIT file in the “MVP-9000i” directory on the microSD card or USB stick, the panel will request that you press the screen to upgrade or wait to continue booting (FIG. 92). Touch the screen to start the firmware update process. FIG. 92 “Firmware upgrade file detected” notice screen 5. If you do not touch the screen to initiate a firmware update within 5 seconds, the touch panel will continue to reboot (FIG. 93). FIG. 93 “Firmware upgrade not initiated” notice screen 110 MVP-9000i Modero® Wireless Touch Panel with Intercom Upgrading Firmware 6. If you touched the screen to upgrade firmware, the Upgrade In Progress splash screen will appear (FIG. 94). FIG. 94 “Upgrade in Progress” splash screen 7. If the panel does not detect the KIT file in the directory, access the Setup Pages (page 47), go to the Protected Settings page (page 63), and access the System & Panel Options page (page 66). If the panel detects the appropriate KIT file, either or both of the Install Firmware or Install Pages buttons will be enabled. Press either to go through the automatic upload procedure. MVP-9000i Modero® Wireless Touch Panel with Intercom 111 Upgrading Firmware Upgrading from Previous Firmware The MVP-9000i allows the option to revert the device to the previous firmware run before an upgrade. To upgrade the device from previously loaded firmware: 1. From the Protected Setup page, press the Options button to open the System & Panel Options page. 2. In the System Options section, press the Install Firmware button. 3. In the Firmware Installation popup window (FIG. 64), press the Previous button. 4. The Confirmation Dialog box (FIG. 95) will ask “Are you sure you want to install the following firmware?” The option to choose Yes will be enabled after five seconds. Press Yes to load the firmware listed, and No to return to the Firmware Installation popup window. FIG. 95 Previous Firmware installation confirmation dialog box 5. If you choose Yes, the device will retrieve the files and then reboot (FIG. 96). FIG. 96 Upgrading from Previous Firmware System Message 112 MVP-9000i Modero® Wireless Touch Panel with Intercom Upgrading Firmware Upgrading Firmware Via NetLinx Studio The MVP-9000i uses a 5-pin CC-USB (Type A) to Mini-B 5-Wire programming cable (FG10-5965) for programming, firmware updates, and touch panel file transfer between a PC and the target device. If a programming cable is not available, it may be purchased from www.amx.com. The Mini-USB port for the connector is located on the left side of the device as viewed from the front. Before beginning with this section, verify that the device is powered and the Type-A end of the USB connector is inserted and secure in the PC’s USB port. The panel must be powered On before connecting the miniUSB connector to the panel. To guarantee that the upgrade is not interrupted by power loss, connecting the device to a power source, such as inserting it into a Table Docking Station, before beginning the upgrade is highly recommended. If the MVP-9000i battery is at less than a 30 percent charge, the firmware upload will automatically fail. For best results, before uploading the firmware, connect the panel to its power source or place it in a Table or Wall Docking Station. Establishing a USB connection between the PC and the panel, prior to installing the USB Driver, will cause a failure in the USB driver installation. 1. Launch NetLinx Studio 2.x and select Settings > Master Communication Settings from the Main menu to open the Master Communication Settings dialog (FIG. 97). If this is the first time the device needs to be configured, refer to the Configuring Modero Firmware via the USB Port section on page 186. FIG. 97 Master Communications Settings dialog box 2. Click the Communications Settings... button to open the Communications Settings dialog box (FIG. 98). FIG. 98 Communications Settings dialog box MVP-9000i Modero® Wireless Touch Panel with Intercom 113 Upgrading Firmware 3. Click on the NetLinx Master radio button from the Platform Selection section. 4. Click on the Virtual Master radio box from the Transport Connection Option section to configure the PC to communicate directly with a panel. Everything else, such as the Authentication, is greyed-out because this connection is not going through the Master’s UI. 5. Click the Edit Settings button on the Communications Settings dialog to open the Virtual NetLinx Master Settings dialog (FIG. 99). FIG. 99 Virtual NetLinx Master Settings 6. Within this dialog, enter the Master System number. The default is 1. 7. In the Available Connections section, click on the IP address for the touch panel to select it. 8. In the Virtual NetLinx Master Settings dialog box, click OK to close the box. 9. In the Communications Settings dialog box, click OK to close the box. 10. In the Master Communications Settings dialog box, click OK to save your settings and return to the main NetLinx Studio application. 11. Click the OnLine Tree tab in the Workspace window to view the devices on the Virtual System. The default System value is 1. 12. Right-click on the Empty Device Tree/System entry and select Refresh System to re-populate the list. The panel will not appear as a device below the virtual system number, in the Online Tree tab, until both the system number used in step 14 for the Virtual NetLinx Master is entered into the Master Connection section of the System Settings page and the panel is restarted. 13. The OnLine Tree should now display the connection to the device. The Connection Status Icon on the device may take up to five seconds to register the connection. Step 3: Confirm and Upgrade the firmware via the USB port Use the CC-USB Type-A to Mini-B 5-wire programming cable to provide communication between the miniUSB Program port on the touch panel and the PC. This method of communication is used to transfer firmware Kit files and TPD4 touch panel files. A mini-USB connection is only detected after it is installed onto an active panel. 1. Verify that the direct USB connection (Type-A on the panel to mini-USB on the panel) is configured properly, using the steps outlined in the previous two sections. 2. With the panel already configured for USB communication and the Virtual Master setup within NetLinx Studio, refresh the Online Tree pane. 3. After the Communication Verification dialog window verifies active communication between the Virtual Master and the panel, click the OnLine Tree tab in the Workspace window (FIG. 100) to view the devices on the Virtual System. The default System value is 1. 114 MVP-9000i Modero® Wireless Touch Panel with Intercom Upgrading Firmware 4. Right-click on the System entry (FIG. 100) and select Refresh System to re-populate the list. Verify the panel appears in the OnLine Tree tab of the Workspace window. Virtual Master firmware version and device number MVP panel firmware version and device number FIG. 100 NetLinx Workspace window (showing panel connection via a Virtual NetLinx Master) The panel-specific firmware is shown on the right of the listed panel. Download the latest firmware file from www.amx.com and then save the Kit file to your computer. Note that each Kit file is intended for download to its corresponding panel. In some cases, several Kit files may be included in a .zip file; extract the .zip file to access the required Kit file. 5. If the panel firmware version is not the latest available; locate the latest firmware file from the www.amx.com > Tech Center > Firmware Files > Modero Panels section of the website. 6. Click on the desired Kit file link and after accepting the Licensing Agreement, verify download of the Modero Kit file to a known location. MVP-9000i Modero® Wireless Touch Panel with Intercom 115 Upgrading Firmware 7. Select Tools > Firmware Transfers > Send to NetLinx Device from the main menu to open the Send to NetLinx Device dialog (FIG. 101). Verify that the panel’s System and Device number values match those values listed within the System folder in the OnLine Tree tab of the Workspace window. FIG. 101 Send to NetLinx Device dialog window 8. Select the appropriate Kit file from within the Browse for Folder window (FIG. 102). FIG. 102 Browse for Folder window 9. Select the panel’s Kit file from the Files section. 10. Enter the Device value associated with the panel and the System number associated with the Master (listed in the OnLine Tree tab of the Workspace window). The Port field is greyed-out. 11. Click the Reboot Device checkbox if it is not already checked. This causes the touch panel to reboot after the firmware update process is complete. 12. Click Send to begin the transfer. The file transfer progress is indicated on the bottom-right of the dialog. 13. After the file transfer is complete, the panel will automatically reboot. As the panel is rebooting, temporarily unplug the USB connector on the panel until the panel has completely restarted. 14. Once the first panel page has been displayed, reconnect the USB connector to the panel. 15. Right-click the associated System number and select Refresh System. This causes a refresh of all project systems, establishes a new connection to the Master, and populates the System list with devices on your particular system. 16. Confirm that the panel has been properly updated to the correct firmware version. 116 MVP-9000i Modero® Wireless Touch Panel with Intercom Upgrading Firmware Verify you have downloaded the latest firmware file from www.amx.com and then save the Kit file to your computer. MVP-9000i Modero® Wireless Touch Panel with Intercom 117 Upgrading Firmware A Special Note for Network Interface Connections Due to any USB connection to your PC being made through a Network Interface Connection (NIC), Windows will automatically make any new NIC connection the Primary connection. If this happens, the USB address of 12.0.0.x will show up across the PC’s network switches as the PC’s source address. In some cases, network administrators will notice the NIC connection and reconfigure any PC that has connected to the MVP-9000i. Business, college, and government installations are the type of installations that would be most affected, and most home installations would not be affected. To prevent the NIC connection from becoming the primary connection: 1. From the Windows Start menu, select Settings > Control Panel to open the Control Panel window. 2. In the Control Panel window, click on the Network Connections icon to open the Network Connections window (FIG. 103) FIG. 103 Network Connections window 118 MVP-9000i Modero® Wireless Touch Panel with Intercom Upgrading Firmware 3. From the Advanced menu, select Advanced Settings... to open the Advanced Settings window (FIG. 104). FIG. 104 Advanced Settings window 4. Under the Adapters And Bindings tab, the user needs to make sure the Local Area Connection is not at the top of the Connections list. If it is at the top of the list (FIG. 104), select it and use the down arrow to the right of the list to move it to the bottom of the list (FIG. 105). FIG. 105 Moving the Local Area Connection 5. In the lower Bindings for Local Area Connection field, unselect ALL bindings by clicking on the checkboxes by each binding to remove the checks from each box (FIG. 106). MVP-9000i Modero® Wireless Touch Panel with Intercom 119 Upgrading Firmware FIG. 106 Bindings for Local area list detail 6. When finished, click OK to close the Advanced Settings window and save all changes. 120 MVP-9000i Modero® Wireless Touch Panel with Intercom Upgrading Firmware Reverting the MVP-9000i to Factory Default Firmware In certain circumstances, it may be necessary to return the MVP-9000i to its original factory firmware and settings. To do so, the procedure may be started either from the touch screen during rebooting, or by accessing the Protected Setup pages. To revert the MVP-9000i to factory default settings via a reboot: 1. Reboot the device, either from the Setup page (page 48) or via the Reset button on the left side of the device (FIG. 2). Touch and hold the touch panel while the device is rebooting, until the “Request for Factory Reset” confirmation screen (FIG. 107) appears. The Status LED on the right front of the device (FIG. 1) will also change color from blue to red. FIG. 107 “Request for factory reset detected” confirmation screen MVP-9000i Modero® Wireless Touch Panel with Intercom 121 Upgrading Firmware 2. Release the touch screen to start the factory reset. The factory reset confirmation screen appears, warning that continuing with the reset will result in a loss of data (FIG. 108), and the red Status LED will blink on and off. Press Yes within 10 seconds to continue with the factory reset, or No to continue the reboot with the current settings and firmware. If neither button is pressed within 10 seconds, the Status LED will change back from red to blue and the reboot will continue. Returning the MVP-9000i to its factory defaults will remove all previous configuration settings and user pages. FIG. 108 Factory reset confirmation screen 3. The MVP-9000i will now reload its factory default settings and firmware and then reboot. To revert the MVP-9000i to factory default settings via the Protected Setup pages: 1. From the Protected Setup page, press the Options button to open the System & Panel Options page (page 66). 2. In the System Options section, press the Install Firmware button. 3. In the Firmware Installation popup window, press the Factory button. 122 MVP-9000i Modero® Wireless Touch Panel with Intercom Upgrading Firmware 4. The Confirmation Dialog box (FIG. 109) will ask “Are you sure you want to install the following firmware?” The option to choose Yes will be enabled after five seconds. Press Yes to load the firmware listed, and No to return to the Firmware Installation popup window. FIG. 109 Factory Firmware reset confirmation dialog box 5. If you choose Yes, the device will retrieve the files and then reboot (FIG. 110). FIG. 110 Factory Firmware Reset system message MVP-9000i Modero® Wireless Touch Panel with Intercom 123 Upgrading Firmware 124 MVP-9000i Modero® Wireless Touch Panel with Intercom Programming Programming Overview You can program the MVP-9000i, using the commands in this section, to perform a wide variety of operations using Send_Commands and variable text commands. A device must first be defined in the NetLinx programming language with values for the Device: Port: System (in all programming examples - Panel is used in place of these values and represents all Modero panels). Verify you are using the latest NetLinx Master and Modero firmware, as well as the latest version of NetLinx Studio and TPD4. Animated Transitions Animated transitions are used to add motion and effects to the transition from one page to another on a panel. With existing panel firmware, page flip transitions occur with the new page immediately drawing over the existing page on the screen. With animated transitions, the old page is moved, faded, or overdrawn from the screen while the new page is drawn. These operations use the OpenGL hardware accelerator to ensure smooth transitions. Current panel firmware also supports animated buttons and popup page effects. This functionality is unchanged. In all cases, once the transition is triggered, the old page is frozen. For example, if the old page had an animated button, the motion on that button would stop as soon as the transition is triggered. If there is motion on the new page such as an animated button or even a popup effect, this motion will operate even while the overall page itself is in motion as part of the transition. Seven different classes of transitions are supported. Each transition class is described below. All of the transition classes, with the exception of Page Curl, are commanded transitions. Once the transition is triggered, it proceeds to completion. Page Curl can be interrupted and directed by the person touching the LCD as described below. Transition Classes Slide The current page slides off of the screen and the new page slides in until it completely covers the screen and stops. There is no gap between pages, so if the page backgrounds match, this effect can give the appearance of moving around on a canvas that is larger than the physical screen size. Slide with bounce This is the same as a slide transition, but with a bounce effect added when the new page reaches the edge of the screen across from where it originated. Black glass The existing page appears to move away from the viewer and off to the side. As soon as it is completely off the screen, the new page moves in and toward the viewer from the opposite edge of the screen. Both the old and new pages have a reflection on the bottom that makes it appear that the page is sliding along black reflective glass. Fade The current page fades out while the new page fades in. Page curl The existing page appears to be peeled away like a sheet of paper, revealing the new page underneath. The new page has a shadow effect, and a faint reversed impression of the old page can be seen through the back of the paper being flipped. This transition can be interrupted by the user by holding a finger on the LCD and moving it around. The corner of the paper will follow the user's finger until released, causing the transition to proceed to completion. For the best effect, the button that triggers the page curl effect should be placed near the corner of the screen from which the page curl will originate. Door with fade The new page moves over the existing page like a door with a hinge at the edge of the LCD. In addition, the new page is semi-transparent, allowing the old page to be seen through until the transition is finished, at which point the old page has faded away. MVP-9000i Modero® Wireless Touch Panel with Intercom 125 Programming Transition Classes (Cont.) Center door with fade This transition operates as above, except that the hinge point is at the center of the LCD rather than the edge. The origin of the transition is the point on the LCD where the motion originates. In most cases, these locations are the top, bottom, left and right of the screen. For example, a slide transition with a left origin will appear to slide in from the left towards the right of the screen. Slide, slide with bounce, door with fade and center door with fade can originate from the top, bottom, left and right sides of the screen. Black glass can originate from the left or right. Fade does not need an origin since the entire screen fades together. Page curl originates from the four corners of the screen: upper left, lower left, upper right and lower right. The transition time is the amount of time required for the transition to operate from start to finish. This value can be specified from 0.3 seconds to 3.0 seconds in tenths of a second. If not specified, the default is 1.5 seconds. Transition times are based on real world clock time and do not vary based on the speed of the processor or the frame rate at which the display system is running. Since the transitions require OpenGL hardware acceleration, they are not seen by the user on a VNC connection. When a transition is triggered, the user will see a normal page flip to the new page on the VNC connection, while the animated transition occurs as expected on the panel. Transition Commands ^AFP Flips to a page with the specified page name using an animated transition. Flips to a page with the specified page name using an animated transition. If the page is active, do not redraw the current page. If the page name is blank, flips to the previous page. Syntax: "'^AFP- , , ,