ANG Technology R1 Multi-function Rollable Bluetooth Keyboard User Manual User s manual

Shenzhen ANG Technology Co., Ltd. Multi-function Rollable Bluetooth Keyboard User s manual

User Manual

1 R1 User manual Multi-function Rolly Bluetooth Keyboard and Multi-function Bluetooth Speaker Bluetooth Keyboard Function Operation LED indicator Power on Press the Power button for 2 seconds Blue LED blink Power off Press the Power button for 2 seconds, and release it Red off until the Red LED is quickly blinking twice pairing mode Make sure the keyboard is off. Press and hold FN Blue LED blink key and press C key Blue LEDs blinking. Caps lock Short press Caps Lock key Blue LED lights
2 Bluetooth Speaker Function Operation LED indicator Voice Prompt Power on Press the MFB button for 2 seconds, and release Blue LED blink power on it till the blue LED is quickly blinking twice. Power off Press the MFB button for 2 seconds LED off power off pairing mode Make sure the speaker is off. Press and hold MFB Blue & Red LEDs blink Pairing button for4 seconds, and release it until the blue & alternatively. red LEDs blinking. Answer calling Short press MFB button Pause music Short press MFB button Play music Short press MFB button Recalling Double click MFB button Charging Use charging cable speaker red lights finish charging blue lights How to use R1 1. Speakers and keyboard separately, press to the speaker MFB BUTTON for 2 seconds, boot into the pair mode. 2. Open the SETTINGS entry for the device to be connected, The Bluetooth for ON. 3. When the search to R1, select R1, when the display has been connected, The earphone LED into only blue in the blink. 4. Pick up the keyboard to press the power button for 2 seconds, the blue light slow flash, and then press the FN button, do not loose, press the “C” key, the blue light flashes slowly, that is into the pair mode. 5. Open the SETTINGS entry for the device to be connected, The Bluetooth for ON. when the search to” R1 keyborad”, select R1 keyboard, when the display has been connected,the blue LED stop blink。 6. Start to enjoy R1 Power button Keyboard LED MFB button Speaker LED Charging dot
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Navigation menu