AOC U107 Tablet PC User Manual

AOC Tablet PC Users Manual

UserManual.wiki >

AOC >

U107 User Manual

User Manual

zPlease keep MID far away from magnetic equipment, radiation from MID will erase information stored on the magnetic equipment.zPlease don’t use MID in places with high temperature and inflammable gas (such as nearby gas station).zPlease put MID and its accessories in places beyond children’s touch, please don’t let children use MID without supervision.zDuring using of this MID, please observe related laws and regulations, respect privacy and legitimate rights of others.zPlease strictly abide by relevant explanations in this manual when using USB data line, otherwise, MID or personal computer may be damaged.zPlease don’t use the MID in humid environment such as bathroom, etc., and the MID being soaked or rinsed by liquid must be avoided.1.3 Abbreviation/termAbbreviation/term Full name ExplanationsMID Mobile Internet Device Mobile internet terminalWIFI Wireless FidelityWireless Local Area Network based on IEEE 802.1/b/g/n or a/b/g/nTF TransFlash Alternate name Micro SD, superminiature storage cardHDMI HighDefinition Multimedia InterfaceHigh definition multi-media interface

2Brief introduction for MID product2.1 Diagram for MID complete machineFigure 2-1Front cameraRear cameraMenu key

Figure 2-2Figure 2-3Figure 2-42.2 Introduction to accessories of MIDPacking listThe following articles are included in your packing box of MID:zComplete machine of MIDzPower adaptorzUSB connecting linezQuick Start GuidezWarranty cardPower on/offSound+/sound-DCTF Micro USBFull Size USBLoudspeaker HeadphoneHDMI

2.3 MID state and noticeIconograph for notificationWhen a prompt message shows on your notice panel, please click the column box and slide on the screen with your finger to open the notice list. Click options needing to check to see detailed information. Then you may click the message box and slide upwards to close the message window. The following are iconography for icons in status bar:Mail notice MuteGmail notice Without SD cardComputer and MID are connected through USB line Uploading/DownloadingEvents waiting to be done Downloading finishedAlarm clock opening General notice (for example: synchronous error)Playing music In data synchronismInsufficient space of SD card MoreWIFI service is connected, netwrk is available Battery symbolAirplane mode ChargingBluetooth is already connected

3Quick start3.1 Key functionDescriptions for key function:Power key zPress this key for a long time to start upzUnder starting up state, press this key for a long time to pop up shutdown optionzUnder starting up state, press this key to close the screenzUnder starting up state or when breakdown appears, press the power key for 7 seconds to make your device enter into shutdown stateMenu key zPress this key to open menu of the current interfaceReturn key zPress this key to return the last operating step or the previous operating interfaceHomepage keyzPress this key to return back main function interface from any interface3.2 Starting up and turning offStarting upPress the power key for 3 seconds, you can see the starting up picture. After the system is started, the machine enters into screen lock state, please unlock according to direction indication of sliding icon on the interface.Turning offˊ After pressing the power key for a long time, the shutdown option will pop up.ˊ Click OK.3.3 Unlocking and closing of the screenThe machine will close automatically when the screen is left unusedˊAfter the screen being left unused for a period of time, the machine will close screen automatically, so as to save battery power.ˊUnder screen on state, press the power key, the screen will close immediatey.

Prompt: if you want to inquire how to set turn-off time of screen, please refer to chapter 9.1. Turninng on under screen off stateIf the screen is in off state, you can unlock the screen by pressing power key for a short time or the return key for a long time. After opening, the screen will enter lock state, press “lock” icon by your finger and slide rightwards, the screen will be unlocked, press “lock” icon and slide leftwards, you can enter the camera function.Figure 3-13.4 Use of touch screenOperating mode in MIDThere are various ways to skim the main screen, menu and application program, etc. on your MID.Click to selectWhen you want to use screen keyboard entry, and you want to select items on the homepage interface such as aplication program, you only use your finger to click.Press onIf you want to unlock the available option of a certain item (such as textbox or interlinkage in the webpage), or move shortcut on the homepage interface and menu of main program, only press the item.Slide quickly or slideQuick sliding or sliding means doing rapid vertical or horizontal drag movement by using 

finger on the picture.DragBefore you starting to drag, you must press it with your finger and impose a certain pressure, and don’t loosen the finger before draging to the wanted position.RotateAiming at most of pictures, only turn the MID in side direction, the screen direction can be shifted from cross direction to vertical direction. For example, when you input characters, watch cinema, etc.3.5 Homepage interfaceAll application programs on the machine will be displayed on the main menu screen. You may use application program, shortcut and user-defined mode to set wallpape of your homepage interfaceFigure 3-2Skill: in any application programs, you can press homepage key to return homepage interface.Custom homepage interfaceNotice barApplication programWallpaperGoogle Search

Change desktop wallpaper1. Press blank region on the homepage interface to pop up the menu.2. When the menu popping up, choose source of homepage interface wallpaper you want to change.3. After clicking source of wallpaper, click picture you want, and then select “setting wallpaper”.Figure 3-3Figure 3-4

3.6 USB connectionStorage setting of MIDBefore transmitting document, you must set storage mode for your MID firstly:1. Connect MID with computer by using USB transmission line. Notice bar will show the notice prompt. 2. Click status bar, options of status bar show.3. Among options of status, click to choose USB connected, then click to open USB storage device.4. At this time, USB has already been connected.Figure 3-5Copy the document to storage card1. Connect MID and computer together with USB cable.2. After setting according to storage of MID, connect with computer successfully.3. Open your computer, in my computer, examine content in “removable disk (x)”.4. Find the document you want to copy, copy it to “removable disk(x)”.5. After completion of copying, click “safely remove hardware” in taskbar of your computer to unload.Content of MID storage device1. NAND FLASH storage device, space for MID to store document itself.2. TF removable memory card.3. The two above-mentioned storage devices both can be visited through connection with 

your computer with USB.Attention: when your MID is connected with USB cable, if you start up USB storagedevice, you will cannot visit the memory card through MID, if you want to visit memory card in MID, only disconnect USB cable.3.7 Memory cardCopy the document to storage cardYou can transmit document between MID and computer, such as music and picture, etc. If you want to see documents in MID, only click the file browser to look through content in the SD card.Delete documents on the storage card of MID1. Find document you want to delete.2. Press the document name you need to delete, a file menu will pop up.3. Click delete.Removing storage card when the MID is in starting up stateIf need to remove storage card under starting up state of MID, you must unload the storage card firstly, for fear of failure or damage of the storage card.1. In the homepage interface, press the mennu key, then click setting.2. Pull the setting menu downwards, then click storage.3. Click SD card setting.4. Click touninstall the SD card.

4Connection Establishment4.1 WIFI ConnectionYour MID can be connected onto Wi-Fi network to connect the operation: 1. On the homepage interface, click and select the meun key and pop up the meun setting; 2. Click and select the System Setting;3. Click Wi-Fi and open wi-fi switch; 4. After openingWi-Fi, the searched Wi-Fi network can be scanned automatically from the equipment in the windows on the right. 5. Select the Wi-Fi network required to be connected, if the password is added, pop up the password input windows and input the corresponding password.6. Click the ConnectionFigure 4-1Advanced Wifi setting optionClick here and select WIFI network

4.2 Bluetooth ConnectionFunctions of bluetooth:1. You can exchange the files betwwen two blueteeth. You can exchange the files with other computers, mobile phones and pda. 2. You can synchronously exchange pims data with mobile phones, pda and laptop to support the bluetooth ( data of outlook E-mail address).3. You can You can exchange the electronic name card with mobile phones, pda and laptop to support the bluetooth.4. You can connect the keyboard, mouse and joystick to support the bluetooth.Application of bluetooth (Figure 4-3)1. Setting procedure of entering into bluetooth: set -> bluetooth set, open the bluetooth equipment 2. Name of equipment: you can randomly change the name of bluetooth for your MID by pressing Menu key.3. Detectability: open this function by clicking the place for name of bluetooth, which indicates that your MID bluetooth can be searched by other bluetooth equipments, this default time for this opening is of 120 seconds. 4. Scan and look for equipment: you can detect the equipment desired to be connected by utilizing this function. 5. Bluetooth: after employing the scan to look for the equipment, all bluetooth equipments searched by your MID can display under this function. 

Figure 4-35Communication5.1 CameraCamera functions 1. Click and select the camera;2. The system enters into the camera interface; 3. Click and select the Photo button and easily take the photos; 4. Set such functions as photo sixe, storage location, white balance and focal length regulating; 5. After completion of taking photo, there is the display for previewed minimap. Click this scan to search for the equipmentClick this and open the detectability function 

Figure 6-2Videotape function1. Click the videotape icon and convert it as video recorder mode; 2. Click and select the red videotape button to take video ; 3. Set such setting functions as color effect, white balance and video quality; 4. Switch 720P and 480P high-definition videorecording.5. Click and select the videorecording button, end the videorecording, and observe the previewed video. Photo functionstart/stop keyVideotape function Cut Front or Rear 

Figure 6-35.2 HDMIHDMI High-definition video interfaceThe MID and the high-definition television are connected by a standard HDMI cable. This interface supports the picture with highest quality of 1080p resolution ratio.1. MID is in the boot status.2. The MID and the high-definition television are connected by a standard HDMI cable.3. The system interface on MID is automatically synchronized with the high-definition TV screen.4. Click Display in the settings menu.5. Click Output Select to switch HDMI mode.6. Click Resolution to set the resolution ratio of HD TV.6Other Applications6.1 File ManagementBrowse filesSlide the desktop to locate the File browser.You can use the file browser to manage, edit and delete the files and folders, or to create sharing and FTP server to achieve resource sharing.

Fig. 8-4Cut and copy files1. In the file browser, press and select the file you want to operate.2. Pop up operating menus, including Cut, Copy, Delete, Rename, Move to, Copy to, Play music, Select all, Set home directory and Attributes, etc. 3. Click Cut or Copy file or folder. 4. Click into the folder you want to paste, and pop up menu by pressing the Menu key.5. Click Operate and then click Paste.Delete files1. In the file browser, press the file you want to delete.2. ClickDelete.3. Click OKto delete file.Folder setup1. In the file browser, pop up menu by pressing the Menu key.2. Click Create.3. Click Folder.4. Click pop-up window and input the name of the new folder in the text box.5. Click OK to create the folder.Quick search1. In the toolbar of the file browser2. Click Search icon.3. Pop up the search panel and enter the keywords you need to find.4. ClickOKand the search progress bar will appear in the notification bar.

5. When the search is completed, pop up the dialog box to confirm whether to show the results.6. Click OK to show the search results.Create sharing1. Load ES file browser. (Fig. 8-5)2. Click ‘Local’ at the upper left corner and select ‘Share’ in the pop-up window.3. Click the menu bar ‘Create’, and select ‘Search’ in the pop-up window .4. The system will automatically search all the computers within the LAN, and each drive of your computer can be seen by clicking OK.5. You can Copy, Delete, Rename here.Fig. 8-5

$Product Parameter7\SH'HWDLOV'HVFULSWLRQVBasical parameterMID modelU107CPU typeIntel Baytrail-T, Quad-Core Z3735GCPU speed1.33-1.83GHzDDR 1GB NANDFLASH32GB Operating system versionAndriod 4.4Network connectionsWIFI 802.1/b/g/n or a/b/g/n+BT+(NFC optional)USB interfaceMINI USB*1 OTGHDMI interfaceHDMI 1.4abatteryLithium-ion polymer battery, 3.7V/7800mAHPower adapterInput: AC 100V-240V; output: DC 5V, 2AExternal memory cardSupport SDHC/SDXC3URGXFWDSSHDUDQFHProduct form2in1LCD10.1” inch (16:10),800*1280/1290*1200 IPSDimensions257.9*173*17.5mmWeightTablet:600g keyboard:550g$SSOLFDWLRQVedioSupport MEPG,H.263/H.264,RMVB,MVC,etc. (UP TO 1080P)AudioSupport MP3,WMA,WAV,OGG,APE,DTS,etc. (need license)GamesSupport to the third party programsInput methodAndriod keyboardphotosSupport browsing BMP, JPG, GIF, PNG,etc.Office softwareSupport reading and editing office files;Support browsing PDF WIFI 802.1/b/g/n +BT+(NFC optional)$

AOC U107 Tablet PC User Manual

AOC Tablet PC Users Manual

User Manual

Navigation menu

Namespaces

Views

Navigation