User Manual
User Operating Manual U107 1 Introduction 1.1 Acknowledgements Many thanks for you choosing this product. The product belongs to MID(Mobile Internet Device), which is a kind of mobile internet device, delicate, small and exquisite, and also portable. It is also equipped with a piece of touch LCD of high definition, which can be used to watch vedios and pictures of high definition. It supports installation of multiple application programs on office and entertainment. The fantastic operation interface will give you a brand-new user experience. This manual systematically introduces diversified functions, using skills and matters needing attention of this MID, please read this manual carefully before using it. 1.2 Safety Notice Before using MID, please read information in this section, and make your children learn about the information. About more detailed information, please refer to safety instructions and matters needing attention. Please donât use MID when you are driving, for fear of hindering safe driving. In medical places, please observe relevant stipulations and regulations. And in regions near the medical devices, please shut down MID. Please shut down MID or enable the airplane mode when boarding, so that the wireless signals will not interfere control signal of the airplane. Please shut down MID neighboring electronic equipments with high accuracy, otherwise, breakdown of electronic equipments may be brought about. Please donât dismantle the MID and its accessories on yourself, and only the authorized agency can maintain this MID. z Please keep MID far away from magnetic equipment, radiation from MID will erase information stored on the magnetic equipment. Please donât use MID in places with high temperature and inflammable gas (such as nearby gas station). Please put MID and its accessories in places beyond childrenâs touch, please donât let children use MID without supervision. During using of this MID, please observe related laws and regulations, respect privacy and legitimate rights of others. Please strictly abide by relevant explanations in this manual when using USB data line, otherwise, MID or personal computer may be damaged. Please donât use the MID in humid environment such as bathroom, etc., and the MID being soaked or rinsed by liquid must be avoided. 1.3 Abbreviation/term Abbreviation/term Full name Explanations MID Mobile Internet Device Mobile internet terminal Wireless Local Area Network WIFI Wireless Fidelity based on IEEE 802.1/b/g/n or a/b/g/n TF TransFlash HDMI HighDefinition Multimedia Interface Alternate name Micro SD, superminiature storage card High definition multi-media interface 2 Brief introduction for MID product 2.1 Diagram for MID complete machine Front camera Menu key Figure 2-1 Rear camera Figure 2-2 Power on/off Sound+/sound- Figure 2-3 TF Full Size USB Loudspeaker DC Micro USB HDMI Headphone Figure 2-4 2.2 Introduction to accessories of MID Packing list The following articles are included in your packing box of MID: Complete machine of MID Power adaptor USB connecting line Quick Start Guide Warranty card 2.3 MID state and notice Iconograph for notification When a prompt message shows on your notice panel, please click the column box and slide on the screen with your finger to open the notice list. Click options needing to check to see detailed information. Then you may click the message box and slide upwards to close the message window. The following are iconography for icons in status bar: Mute Mail notice Gmail notice Without SD card Computer and MID are connected through USB line Uploading/Downloading Events waiting to be done Downloading finished Alarm clock opening General notice (for example: synchronous error) Playing music In data synchronism Insufficient space of SD card More WIFI service is connected, netwrk is available Battery symbol Airplane mode Charging Bluetooth is already connected 3 Quick start 3.1 Key function Descriptions for key function: Power key Press this key for a long time to start up Under starting up state, press this key for a long time to pop up shutdown option Under starting up state, press this key to close the screen Under starting up state or when breakdown appears, press the power key for 7 seconds to make your device enter into shutdown state Menu key Press this key to open menu of the current interface Return key Press this key to return the last operating step or the previous operating interface Homepage key Press this key to return back main function interface from any interface 3.2 Starting up and turning off Starting up Press the power key for 3 seconds, you can see the starting up picture. After the system is started, the machine enters into screen lock state, please unlock according to direction indication of sliding icon on the interface. Turning off Ë After pressing the power key for a long time, the shutdown option will pop up. Ë Click OK. 3.3 Unlocking and closing of the screen The machine will close automatically when the screen is left unused ËAfter the screen being left unused for a period of time, the machine will close screen automatically, so as to save battery power. ËUnder screen on state, press the power key, the screen will close immediatey. Prompt: if you want to inquire how to set turn-off time of screen, please refer to chapter 9.1. Turninng on under screen off state If the screen is in off state, you can unlock the screen by pressing power key for a short time or the return key for a long time. After opening, the screen will enter lock state, press âlockâ icon by your finger and slide rightwards, the screen will be unlocked, press âlockâ icon and slide leftwards, you can enter the camera function. Figure 3-1 3.4 Use of touch screen Operating mode in MID There are various ways to skim the main screen, menu and application program, etc. on your MID. Click to select When you want to use screen keyboard entry, and you want to select items on the homepage interface such as aplication program, you only use your finger to click. Press on If you want to unlock the available option of a certain item (such as textbox or interlinkage in the webpage), or move shortcut on the homepage interface and menu of main program, only press the item. Slide quickly or slide Quick sliding or sliding means doing rapid vertical or horizontal drag movement by using finger on the picture. Drag Before you starting to drag, you must press it with your finger and impose a certain pressure, and donât loosen the finger before draging to the wanted position. Rotate Aiming at most of pictures, only turn the MID in side direction, the screen direction can be shifted from cross direction to vertical direction. For example, when you input characters, watch cinema, etc. 3.5 Homepage interface All application programs on the machine will be displayed on the main menu screen. You may use application program, shortcut and user-defined mode to set wallpape of your homepage interface Notice bar Google Search Wallpaper Application program Figure 3-2 Skill: in any application programs, you can press homepage key to return homepage interface. Custom homepage interface Change desktop wallpaper 1. Press blank region on the homepage interface to pop up the menu. 2. When the menu popping up, choose source of homepage interface wallpaper you want to change. 3. After clicking source of wallpaper, click picture you want, and then select âsetting wallpaperâ. Figure 3-3 Figure 3-4 3.6 USB connection Storage setting of MID Before transmitting document, you must set storage mode for your MID firstly: 1. Connect MID with computer by using USB transmission line. Notice bar will show the notice prompt. 2. Click status bar, options of status bar show. 3. Among options of status, click to choose USB connected, then click to open USB storage device. 4. At this time, USB has already been connected. Figure 3-5 Copy the document to storage card 1. Connect MID and computer together with USB cable. 2. After setting according to storage of MID, connect with computer successfully. 3. Open your computer, in my computer, examine content in âremovable disk (x)â. 4. Find the document you want to copy, copy it to âremovable disk(x)â. 5. After completion of copying, click âsafely remove hardwareâ in taskbar of your computer to unload. Content of MID storage device 1. NAND FLASH storage device, space for MID to store document itself. 2. TF removable memory card. 3. The two above-mentioned storage devices both can be visited through connection with your computer with USB. Attention: when your MID is connected with USB cable, if you start up USB storage device, you will cannot visit the memory card through MID, if you want to visit memory card in MID, only disconnect USB cable. 3.7 Memory card Copy the document to storage card You can transmit document between MID and computer, such as music and picture, etc. If you want to see documents in MID, only click the file browser to look through content in the SD card. Delete documents on the storage card of MID 1. Find document you want to delete. 2. Press the document name you need to delete, a file menu will pop up. 3. Click delete. Removing storage card when the MID is in starting up state If need to remove storage card under starting up state of MID, you must unload the storage card firstly, for fear of failure or damage of the storage card. 1. In the homepage interface, press the mennu key, then click setting. 2. Pull the setting menu downwards, then click storage. 3. Click SD card setting. 4. Click touninstall the SD card. 4 Connection Establishment 4.1 WIFI Connection Your MID can be connected onto Wi-Fi network to connect the operation: 1. On the homepage interface, click and select the meun key and pop up the meun setting; 2. Click and select the System Setting; 3. Click Wi-Fi and open wi-fi switch; 4. After openingWi-Fi, the searched Wi-Fi network can be scanned automatically from the equipment in the windows on the right. 5. Select the Wi-Fi network required to be connected, if the password is added, pop up the password input windows and input the corresponding password. 6. Click the Connection Click here and select WIFI network Advanced Wifi setting option Figure 4-1 4.2 Bluetooth Connection Functions of bluetooth: 1. You can exchange the files betwwen two blueteeth. You can exchange other computers, mobile phones and pda. the files with 2. You can synchronously exchange pims data with mobile phones, pda and laptop to support the bluetooth ( data of outlook E-mail address). 3. You can You can exchange the electronic name card with mobile phones, pda and laptop to support the bluetooth. 4. You can connect the keyboard, mouse and joystick to support the bluetooth. Application of bluetooth (Figure 4-3) 1. Setting procedure of entering into bluetooth: set -> bluetooth set, open the bluetooth equipment 2. Name of equipment: you can randomly change the name of bluetooth for your MID by pressing Menu key. 3. Detectability: open this function by clicking the place for name of bluetooth, which indicates that your MID bluetooth can be searched by other bluetooth equipments, this default time for this opening is of 120 seconds. 4. Scan and look for equipment: you can detect the equipment desired to be connected by utilizing this function. 5. Bluetooth: after employing the scan to look for the equipment, all bluetooth equipments searched by your MID can display under this function. Click this and open the Click this scan to search detectability function for the equipment Figure 4-3 5 Communication 5.1 Camera Camera functions 1. Click and select the camera; 2. The system enters into the camera interface; 3. Click and select the Photo button and easily take the photos; 4. Set such functions as photo sixe, storage location, white balance and focal length regulating; 5. After completion of taking photo, there is the display for previewed minimap. Photo function Figure 6-2 Videotape function 1. Click the videotape icon and convert it as video recorder mode; 2. Click and select the red videotape button to take video ; 3. Set such setting functions as color effect, white balance and video quality; 4. Switch 720P and 480P high-definition videorecording. 5. Click and select the videorecording button, end the videorecording, and observe the previewed video. start/stop key Cut Front or Rear Videotape function Figure 6-3 5.2 HDMI HDMI High-definition video interface The MID and the high-definition television are connected by a standard HDMI cable. This interface supports the picture with highest quality of 1080p resolution ratio. 1. MID is in the boot status. 2. The MID and the high-definition television are connected by a standard HDMI cable. 3. The system interface on MID is automatically synchronized with the high-definition TV screen. 4. Click Display in the settings menu. 5. Click Output Select to switch HDMI mode. 6. Click Resolution to set the resolution ratio of HD TV. 6 Other Applications 6.1 File Management Browse files Slide the desktop to locate the File browser. You can use the file browser to manage, edit and delete the files and folders, or to create sharing and FTP server to achieve resource sharing. Fig. 8-4 Cut and copy files 1. In the file browser, press and select the file you want to operate. 2. Pop up operating menus, including Cut, Copy, Delete, Rename, Move to, Copy to, Play music, Select all, Set home directory and Attributes, etc. 3. Click Cut or Copy file or folder. 4. Click into the folder you want to paste, and pop up menu by pressing the Menu key. 5. Click Operate and then click Paste. Delete files 1. In the file browser, press the file you want to delete. 2. ClickDelete. 3. Click OKto delete file. Folder setup 1. In the file browser, pop up menu by pressing the Menu key. 2. Click Create. 3. Click Folder. 4. Click pop-up window and input the name of the new folder in the text box. 5. Click OK to create the folder. Quick search 1. In the toolbar of the file browser 2. Click Search icon. 3. Pop up the search panel and enter the keywords you need to find. 4. ClickOKand the search progress bar will appear in the notification bar. 5. When the search is completed, pop up the dialog box to confirm whether to show the results. 6. Click OK to show the search results. Create sharing 1. Load ES file browser. (Fig. 8-5) 2. Click âLocalâ at the upper left corner and select âShareâ in the pop-up window. 3. Click the menu bar âCreateâ, and select âSearchâ in the pop-up window . 4. The system will automatically search all the computers within the LAN, and each drive of your computer can be seen by clicking OK. 5. You can Copy, Delete, Rename here. Fig. 8-5 Product Parameter 7\SH 'HWDLOV 'HVFULSWLRQV MID model U107 CPU type Intel Baytrail-T, Quad-Core Z3735G CPU speed 1.33-1.83GHz DDR 1GB NAND FLASH 32GB Operating system version Basical parameter 3URGXFW DSSHDUDQFH Network connections Andriod 4.4 WIFI optional) optional) WIFI 802.1/b/g/n 802.1/b/g/n +BT+(NFC or a/b/g/n+BT+(NFC USB interface MINI USB*1 OTG HDMI interface HDMI 1.4a battery Lithium-ion polymer battery, 3.7V/7800mAH Power adapter Input: AC 100V-240V; output: DC 5V, 2A External memory card Support SDHC/SDXC Product form 2in1 LCD 10.1â inch (16:10),800*1280/1290*1200 IPS Dimensions 257.9*173*17.5mm Weight Tablet:600g keyboard:550g Vedio Support MEPG,H.263/H.264,RMVB,MVC,etc. (UP TO 1080P) Audio Support MP3,WMA,WAV,OGG,APE,DTS,etc. (need license) Games Support to the third party programs $SSOLFDWLRQ Input method Andriod keyboard photos Support browsing BMP, JPG, GIF, PNG,etc. Office software Support reading and editing office files;Support browsing PDF FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : emdoor Create Date : 2015:06:17 14:38:26+08:00 Modify Date : 2015:06:17 14:38:26+08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Metadata Date : 2015:06:17 14:33:48+08:00 Creator Tool : Acrobat PDFMaker 11 Word 版 Document ID : uuid:882aed35-d1ac-4b54-b752-2150daa10a11 Instance ID : uuid:ce65565b-c270-4768-9f66-ec90390bdbab Subject : 2 Format : application/pdf Title : 深圳亿道电子有限公司 Creator : emdoor Producer : Acrobat Distiller 9.0.0 (Windows) Source Modified : D:20150610025900 Company : emdoor KSO Product Build Ver : 2052-9.1.0.4993 Page Count : 21EXIF Metadata provided by EXIF.tools