APICAL TECHNOLOGY A4301 GPS Portable Navigation with FM Transmitter User Manual

APICAL TECHNOLOGY (HK) CO., LTD. GPS Portable Navigation with FM Transmitter

User Manual

V43H01GPS PortableNavigation DeviceUser Manual
23Please read this manual before you start using this deviceThanks for purchasing our product. Please read this manual carefullybefore starting to use this device. When you use this device, you aresupposed to learn well of this product.The information in this manual has been verified for its accuracy. Butno liability will be applied for the correctness of mapping data ofnavigation, technical and/or editorial interpretation or illustration, or the printing and translation of this manual, nor liable for anyconsequence or incidental damages caused by using this manual.This device is a complicated technical product consisting of OS andthird party software. The manufacturer has paid sufficient attention toand fulfill its duty in its hardware manufacture processing and indevelopment and/or application of the software so as to ensure thedevice work properly. If there is any malfunction or defective of thedevice, the manufacturer will provide a warranty for the congenitalquality problem, but not covering for any loss or damage of property,or any consequence caused by or related to using this device.The navigation software and mapping data is provided by a third party.Its copyright is protected by laws. A User can only use on this device,any copying or application of the software for other purpose is notallowed.No explicit and/or implicit guarantee or assurance will be applicablefor the validity, integrity, correctness, accuracy of mapping data fornavigation used on this device, nor liability for any loss, damage,and/or any consequence caused by or related to defective mappingdata or software used on this device.The copyright of this manual is owned by the company and protectedby laws. Any copy or translation of whole or part of its content,including words, figures, signs, phonetic index, etc., is only allowedfor the individual customer's reference, but not for public circulation,or other legal and/or commercial purpose. The company reserves theright for final interpretation of this manual.This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:(1) this device may not cause harmful interference,and (2) this device must accept any interferencereceived, including interference that may causeundesired operation.FCC ID:XXXYYYYChanges or modifications not expressly approved by the partyresponsible for compliance could void the user's authority to operatethe equipment.NOTE: This equipment has been tested and found to comply with thelimits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection againstharmful interference in a residential installation.This equipment generates, uses and can radiate radio frequencyenergy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or televisionreception, which can be determined by turning the equipment off andon, the user is encouraged to try to correct the interference by one ormore of the followingmeasures:-- Reorient or relocate the receiving antenna.-- Increase the separation between the equipment and receiver.-- Connect the equipment into an outlet on a circuit differentfrom that to which the receiver is connected.-- Consult the dealer or an experienced radio/TV technician for help.
67GPS CMMB BluetoothMed ia Player00:0045Warnings:Please install the device in a right way to avoid driver's sight andairbag to be hindered. Any loss or damage of product, passengers, orother property caused by mistakes of mounting or installing of thedevice will be not covered within the warranty and not be theresponsibility of the manufacturer.Please not put on earphone and operate the device when you drive orride a bike to ensure your safety.Please consult with airline crew for application of the device if youwant to use it during flight.Please keep the device far away from strong magnetic field which maycause damage or malfunction to the devicePlease protect the device from being dropped, shocked or scratchedon or by hard objects to avoid possible damages (scratches on thedevice face, loose contact of the battery, data loss or other hardwarepart broken) to the devicePlease not use earphone with a continuous and large volume for longtime, set the volume at a moderate loudness and use it not for a longtime to avoid possible damage to your ear audibilityPlease not use chemical solution or cleaner to clean the device toavoid possible damage to the paint and polish of its surfaceWhen the device is used as a mobile storage device, please followright procedures of file management operation to copy or transfer files.The warranty does not cover any mistake, or damage, or loss of filesIt will be better for you to make a backup copy of your personal files inthe device into your PC or laptop in timeIt is prohibited to use higher voltage power supply, to bent or squeezethe power cord with big force so as to avoid possible damage andoverheat resulting in fireNever use wet hands to pull out or plug in the power plug to avoidpossible electric shockNot use the device in an environment over 60?, or below -10?,andwith high humidity as wellThe content of this manual is subject to definition, or interpretation, ormodification from time to time for improvement on features andfunction without prior notice.Function DescriptionFunction DescriptionFeatures:Most popular Windows OS, World class CPUSD card of extensible capacity for mapping data, MP4 video, MP3music, Photo, and personal filesMap for major large and medium scale cities, detailed mapping data,real voice guidance, automatic smooth switchingBuilt-in high sensitive GPS receiving module and antenna, FasterGPS signal receiving and More accurate positioningPrompt and accurate positioning applicable for GPS data collection,e.g. Area measuringPrompt response for both cold and warm start; Re-capture of GPSsignal just in 1 second on average, Accuracy of positioning: no morethan 10 meters; Accuracy of timing: no more than 1 microsecondEmbedded Organizer/Calendar, personalized friendly touch panelhandwriting control, record and plan personal scheduleMultimedia entertainment: Flash display, MP3 music, MP4 video,Photo viewingScientific calculation: embedded calculator, a good business assistantPersonalized function setting˖Language selection, Backlightbrightness adjustment; Power management, Coordination calibrationThe FM transmitter designed for use in a car with car stereo is notcontrolled with volume of the device.A user friendly feature is GPS "hold On". With this feature, you mayuse the device for other applications, like music, e-Book, except forFalsh, by pressing Return button on the device to switch GPSapplication to background and keep it running without exiting fromGPS application during the same time.Ultra large, high-definition, and true color display, touch screenoperations with handwriting input.Professional portable navigation system, interface design of car electronicproducts, changeable theme interface, and convenient operations.Illustrations on screen display:In this interface, click the icons on the screen to enter the correspondingfunctions; and click the arrow on the right bottom to turn the page. Therewill be an animation effect when turning the page.Function Description Function DescriptionSystem UI(Projector Screen)Under this UI, click icon down the screen to enter the function page.Then there will be Looped playback of cartoon, click it to entry thisfunction. If you click the icons beside the function icon you can enjoythe cartoons. If you click the arrow up the corner you can turn pages toview, which accompanies the cartoon at the same time.Secondary UI(Projector Screen)eBook AlarmLanguage Backlight Power SoundTime System Co.adjustThe following content is tips for GPS device application andoperation. Please read it before starting use of the GPS device,so that you may make a better use of the GPS device.While the GPS device is working, it receives sig al from satellites forpositioning. The signal from satellite may not be received, or beweakened in room, nearby some big buildings, or under overheadbridges.nWhen the GPS device is receiving satellite signals, you will get sig alsfrom different satellites when you are in different places, this is called"Satellite Path", a "Satellite Path" only covers a range of 300 KM. If a "Satellite Path" is defined at place A, then turn off the device and moveto another place beyond 300 KM away from A, the device is underanother "Satellite Path", At this moment, the device needs to searchfor satellite signal again. To track the new "Satellite Path", this willtake quite a long time. To save time for this searching, you may click"GPS Reset" button in menu of "GPS Testing" to clear the previous“Satellite Path".nIt will be difficult and taking more time to catch positioning sig al fromsatellite during high speed driving. It is suggested to search thepositioning signal by stoping your car for a better and safer effect.nWhile charging the device, please only use the travel charger or carcharger equipped by the manufacturer in its original package. Otherchargers may cause damage to this device, and this damage is notcovered by our warranty. Bluetooth is optional.
8910 1120Battery Status Icon:Full DrainedWhen the battery is at low power level, please charge itimmediately to ensure the device work normallyCharging:Warnings for charging:1. A new battery may be empty and not charged before you get the device.2. To achieve the best performance of the battery, it is better to charge it up to 8 hours in the first three times, but not over 16 hours.3. In normal charging with DC charger, please make sure to charge it for 2 – 2.5 hours to get it fully charged.A new battery will reach its best performance after a numbercycles of charging and discharging.If the device is not used for long time, it is better to chargeit to full capacity every 2 or 3 months during storage.If not using the device for a long time, it is wise to take outthe battery.Charger Application:DC Charger:Take out the DC charger, plug it into the wall outlet with AC 220V(100V~240V), then plug in the DC jack into the device DC-in jack.(see theillustration below).Car Lighter Charger:Please insert the car charger into car cigarette lighter jack, then pluginto the USB jack(see the illustration below).Inserting into carcigarette lighter jackUSB jackWhen you use car charger, please start car engine first, thenconnect it to the device to avoid possible damage to thedevice due to overloaded pulse current during ignition.Please pull it out when you stop the engine, and plug it inagain after next ignition.Power On the deviceIn power off status, slide the power switch to "ON" position to turn onthe device, then the OSD will be displayed on screen.BatteryPower On/Off the device Function & OperationSleeping & Power –offIn power-on mode, press the power button on the device for 3-5 secondsthen the sleeping mode or confirmation for power-off screen will displayas follows:In this UI click the button will be in sleeping mode, click the buttonwill power off ; click the button to exit the UI and back tonormal operation.Waking -up from the sleepingWhen in sleeping mode, a short press on the power-on button of thedevice will wake up the system.When in sleeping mode, all the procedure in operation willpause but will back to normal status after waking up.The clevice will be power off in sIn this interface, click the small icon to switch to the corresponding page.Then, an animation is played circularly on the screen. Touch the screenor the small icon on the bottom to enter the function, and click the arrowon the right bottom to turn the page. There will be an animation effectwhen turning the page.In this interface, click the icons on the screen to enter the correspondingfunctions; and click the arrow on the right bottom to turn the page. Therewill be an animation effect when turning the page.Two kind s of the me interf ac es are avail able. To ch ange the the me,change it in the language setup under the system se tup .Secondary UI (Green background)System UI (Green background)Language Backlight Power SoundTime System Co.adjustFunction Description
12 1314 1501 CMMB-60102 CMMB-60203 CMMB-6032238/4875Preset channel listIn the preset channel list, click or button to turn the pageto view the saved channels, and click the channel below directly to startplaying.Exit the mobile TV playClick the button on the right top of the screen when playing CMMBmobile TV to close the playing.In the following interface:Click button to search the channels again and save them in thepreset channel list for convenient watching. Click or to adjustthe volume, and click button to turn the device to the mute mode,then, the button is changed to ; click the button to resume thevolume. Click button to play the video in full height screen, andbutton to play in full width screen. In full screen playing, click the nextprogram to return to normal play.Progress:FLASHOperation:FLASH PlayThis is for Flash file playing.On system main menu, click icon, to get into Flash playingmode,then file selection UI will be shown on screen:on this UI, click button to search Flash files not in selected folder;click button to close this window and exit Flash palying mode;double click, or select then click button to open thie selected file.Flash file 1.wmvFlash file 2.wmvFlash file 3.wmvFlash file 4.wmvFunction & OperationFunction & OperationFunction & OperationFunction & OperationPicture-in-Picture (Optional Function)Under normal playing status, click the button to fulfill “Picture-in-Picture ’’ function. At this moment, only the present screen will appear,the other icons will be hindered. The display is as follow:In this UI, the playing screen will show the video picture at the proportionof 3:4. Pressing the right corner of the video picture then drag it to minifyof magnify the proportion of the picture. If you press other places of thepicture, you can drag it on the screen as you wish. Under Picture-in-Picture state, you can watch mobile TV while playing game or setting upother functions. Since the size of the video can be changed and moved,functions will not interfere with each other.GPS CMMB Video Music BluetoothFlashChannel ListIn the saved channel list, click the button to view the savedchannels, and the button will change to , click it to exit thechannel list .CMMB Mobile TVCMMB, short for China Mobile Multimedia Broadcasting, is specializedin the small screen handheld terminals including MP4, mobile phone,GPS, USB receiver, and standalone receiver, providing services of DVB-T programs, integrated information, and emergency broadcasting,which realizes the overall coverage of satellite transmission and theground network. Use the self-intellectual mobile multimedia broadcastingtechnology, the system can be operated, maintained, and managed.Broadcasting and double-direction services are available. The CMMBsupports the operating system of combining the central and localoperations, and with the encrypted entitled control and managementsystem. Besides, it also supports the united standards and operation,and the countrywide roaming.Operating method:Click icon in the system main interface to enter the CMMB player.A dialogue box appears when entering, which indicates “All other programswill be closed when CMMB is used”. Click "OK" to enter the player. Thescreen is shown as follows:The system searches the channel automatically when it enters the player,and saves the searched radio channels in the preset channel list on theright side.FunctionbuttonPresetchannel list
16 1718 19Video PlaybackOperation:On system main menu, click icon to enter into Video Playbackapplication.Display of UI for file selection:This feature is for video file playing, with the formats: AVI, MPEG,MPG, ASX, DAT,ASF and WMV.video file 1.wmvvideo file 2.wmvvideo file 3.wmvvideo file 4.wmvVideoOn this UI, click button to search video files not listed in theappointed video file folder; Click button to close and exit from VideoPlayback application; Double click or select and click button toopen and play this file.UI and button definition:PlayPauseStopCloseNextPreviousFull screen displayPlay Progression, drag to a point to start playVolume tune, click anterior to set into mutestatus, click it again to resumeIn full screen display, the tool bar at screen bottom will behidden, you can slightly tap on screen to get it.It will take a few minutes to search fies when video playmode starts if this application has not been used for a long time.Function & OperationFunction & OperationFunction & OperationFunction & OperationVideo_01rmVideo_02rmVideo_03rmVideo_04rmvb16:9RMVB PlayerThis function is special for RM and RMVB files.Operation:In the system UI, click the to entry the function of Mediaplayer, then click the "RM" to enter into the Video Player. And thescreen will display as follows: iconIn the present UI, click the button to search the video files whichyou have saved beforetime. Click the button to exit the rmvb player,double-click the file you select or click the button you can openthe file.RMVB PlayerIn full screen, tool bar will be hidden at screen bottom,you may get it by tapping on the screen.Control buttons in playing mode::Play, in Pause or Stop mode, press this button to play;:Pause, in Play mode, pressing this button to pause;:Stop, in Play mode, pressing this button to stop;:Fast Forward, in Play mode, pressing this button to get fast forward once;:Fast Retreat, in Play mode, pressing this button to fast retreat once;:Full Screen, pressing this button for full screen paly;:Return, pressing this button to return back to system main menu from playing mode;:status the sound icon will change to Click the mute icon toback to its normal status and the sound icon will back to atthe same time.Sound Settings, Click the button to change into mute, in which
20 2122 23Function & OperationFunction & OperationFunction & OperationFunction & OperationMusicmusic 01music 02music 03music 04music 05This is for Music Playback with format of MP3, WMA, WAV.Music PlaybackOperation˖On system main menu, click icon to play music. Screen display is shown as the illustration below:On this UI, click button to search for music files not in selectedfolder; click button to close this window and exit musi play mode;double click, or select then click button to play this music file.Music play mode is displayed as following diagrams:In music play mode, click button to pause, then it becomes PlayButton ; At this time click button, music play mode willreturn again; click button to stop; click button to jump tothe next one,click button to jump to the previous one;clickbutton to switch Repeat mode; click button to set mute, then thisbutton will become , click again to recover.Button and control in Play Mode:Exit from Music playClick button at the upper right corner to exit.image 01jpgimage 02bmpimagegifPhoto DisplayThis is for Photo Display with format JPG stored in an SD card.Operation:On system main menu, click icon to enter into Photo Displayfunction. Display of UI for file selection:On this UI, click button to search photo files not listed in theappointed photo file folder; click button to close current UI and exitPhoto Display function; double click or select then click button toopen or play this file. Display shown as the right illustration:⬠䴶ᣝ䪂ࡳ㛑˖16:9:Play:Pause:Stop:Close:Next File:Former File:Full Screen Display (the suitable screen size):Full screen Display (Stretch to the whole screen)Player Progress,Drag the line to change the playerprogress.Volume Regulating Click the button to change toMute, click it again to its normal status.Warning: when it plays in full screen, the tool bar down the screen will be hidden. If you tap the screen, the tool bar will show.
28 2930 31Function & OperationFunction & OperationFunction & OperationFunction & Operation7763OD\eBook ReadingThis if for eBook Reading with format .txt stored in an SD card.Operation:On system main menu, click button to enter into eBook Readingapplication. Display of UI for file selection:Click or button to turn page up or down; “Manual/Automatic” is set for selecting Manual or Automatic page turning; Font is forselecting letter size of display.Close buttonBookmark buttonJump buttonSearch buttonPrevious buttonNext buttonOn this menu, click button to search for txt files not in selectedfolder; click button to close this window and exit file reading mode;double click button, or select then click button to open this file.The screen display is shown as follows:E-BookeBook 01txteBook 02txteBook 03txteBook 04txteBook 05txteBook 06txteBook 07txtAuto Manu Big font Small fontThis software is the property of Corel Corporationand its licensors and is protected by copyright.Any reproduction in whole or in part is strictlyprohibited.Corel, CorelDRAW, Corel R.A.V.E., CorelPHOTO-PAINT, CorelTRACE, and Corel CAPTURE aretrademarks or registered trademarks of CorelCorporation and/or its subsidiaries in Canada,the U.S. and/or other countries.Imaging Technology provided under License byTTS Settingℸᯊ⚍ߏᣝ䪂ˈৃҹЎᔧࠡⱘ义䴶ֱᄬϔϾкㅒDŽⳈ᥹೼ᇍ䆱⚍Ḛݙৃ⚍ߏ䗝ᢽᏆֱᄬⱘкㅒˈ䗝Ёৢ⚍ߏᣝ䪂ৃߴ䰸䖭Ͼкㅒ˗⚍ߏᣝ䪂ৃ䏇䕀ࠄ䖭Ͼкㅒ᠔೼ⱘ义䴶DŽ⚍ߏᣝ䪂䗔ߎкㅒ䆒㕂䖨ಲℷᐌ䯙䇏⢊ᗕDŽBookmarkThis is for bookmark in reading a voluminous article, marking orjumping to the last time marked page, a humanized design forconvenience while reading.Operation:In eBook Reading mode, click rightbutton to enter into bookmark setting,display of dialogueblock is shown as in theillustration below:Jump to the appointed pageThis is for jumping to the appointed page when reading a voluminousarticle and no bookmark is set.Operation: In eBook Reading mode, click right button to enter intoJump function, display of dialogue block is shown as in the illustrationbelow:Click the number key on screen to input the page number to jump to,when inputting, click button to backspace for deleting; clickbutton to clear input block, after inputting page number click buttonto jump to the page of selected number.5678901234Search for specific word or phrase in eBookThis is for searching a specific word or phrase in the current readingarticle. In eBook Reading mode, click right button on screen to jump out from the dialogue block shown as in the illustration below:CheckExitChe ck cu rren t pageCheck allSearchqwertyuiop-asdfghj k lzxc vbn'm[,].\/;-Bspc<EnterCtrlShift CapsEnterSpaceüClick on the input field on the screen, and a soft keyboard appears asfollows:As shown in the picture, you can choose the input method from the lastbutton at the bottom; click "Handwrite" to change to the handwritinginput state; and click "Hide" to close the small keyboard. Thehandwriting input state is shown as follows:English PinYin WuBi NumHandWriteHide MoveAssn.ChinesePunct. Num.KeyboardMove HideEnglishAs shown in the picture, the middle empty area is the handwriting area.Click the button on the right side to change the input method, and click"Hide" to close the handwriting input panel; click "keyboard" to returnto keyboard input state.Enter the desired characters and click "Next" to start searching. Clickthis button again to search for the next one if the result is not up to thedemand.Then, click or button to select previous or next photos; click or button to zoom in or zoom out photo; click button forfull screen display. In full screen display, tap the screen again to exitfull screen display; click button to select display of differentpercentage;Click the button you can Ctrl-Shift-R or Ctrl-R thephoto. is for selecting to set automatic or manual mode to turnpage of display.Click the button on upper right corner to exit.Exit Photo DisplayOperation under photo view
32 3334 35Function & OperationFunction & OperationFunction & OperationFunction & OperationSchedule OrganizerThis is to Add, Edit, Delete schedule, and display the schedule in week,month, enable the user to find the scheduled agenda conveniently.Operation:January 2007Sun Mon Tue Wed Thu Fri SatSchedulerClick to seeprevious monthClick to seenext month“Add” button “Week” button “Delete” buttonThe screen display is in month display mode. The date to be completedfor the matters on screen show in red color. Click the date to enter intoday display mode; click “Week” to enter into week display mode.Search by DateSelect and click a date on the screen to enter into Date display mode.Screen display is shown as in the illustration below:In the system UI,click the icon to open Tools, under which youcan entry the Schedule by clicking the icon The illustration willshow like below:∝㣅ᄫᑧBACKEDFNEDFNDOOH\%DFN%D\EDFNEHQFKHUEDFNEXVWLQJEDFNFDOOEDFNFKHFNEDFNFUDZOEDFNHQGbackadj.ৢ䴶ⱘ ೼ৢ䴶 ᮽ䖛এⱘ ࠡ⃴ⱘ䪅adv৥ৢഄn㚠䚼 ৢ䴶vৢ䗔 ᬃᣕAt this time, enter the word to be queried. After that, click thebutton and the screen will pop up the query result.EnterSpaceüAs shown in the picture, you can choose the input method from the lastbutton at the bottom; click "Handwrite" to change to the handwritinginput state; and click "Hide" to close the small keyboard. Thehandwriting input state is shown as follows:Assn.ChinesePunct. Num.KeyboardMove HideEnglishAs shown in the picture, the middle empty area is the handwriting area.Click the button on the right side to change the input method, and click"Hide" to close the handwriting input panel; click "keyboard" to returnto keyboard input state.Related wordSmartIn this state, double-click the word in the intelligent input field on theleft directly to view the query result.Exiting Dictionary TranslationOn the main interface of the Dictionary Translation function, click the button on the upper right corner to exit the Dictionary Translationfunction and return to the system main interface.∝㣅ᄫᑧDictionaryThe device provides built-in English-Chinese and Chinese-Englishdictionaries. The vocabulary is large. Intelligent text input is supported.DictionaryRelated wordSmartAfter you enter the Dictionary Translation function, click the drop-downbutton behind the dictionaries, as shown in the diagram above. Selectand change the Chinese-English or English-Chinese dictionary savedon the SD card and load it onto the program, facilitating the Chinese-English translation function. During text input, the list of words withthe same initial as the inputted letter in the intelligent input field. Clickthe word directly in the intelligent input field to view the translationresult.Input/Searchqwertyuiop-asdfghj k lzxc vbn'm[,].\/;-Bspc<EnterCtrlShift CapsClick on the input field on the screen, and a soft keyboard appears asfollows:English PinYin WuBi NumHandWriteHide MoveOperation:In the system UI, click the icon to open the "Tools”, then clickthe icon to enter the Dictionary function.TTS speech broadcastingTTS speech broadcasting function is able to read the article you arebrowsing. Click button to set the parameter of speech broadcastingas follows:TTS speech speed, tone, and volume are available to be adjusted. Click"OK" to save the setup and close the window when everything is set.Click button to read the articles; the page will be turned automaticallywhen reading.SpeedToneVolume
Sun Mon Tue Wed Thu Fri SatDec36 3738 39Function & OperationFunction & OperationFunction & OperationFunction & Operation12-27-2006Click to seethe previous dayClick to see the next dayClick time tag on date screen to check and revise a stored schedule oragenda. If the time tag is blank, then click it to set up a new scheduleor agenda.To create a new schedule, please refer to “Create New Schedule” inthe following text for detailed procedure. Click button on upper rightcorn to exit and return back to Search by MonthClick “Week” button to enter into display mode.Screen displayis shown as in the illustration below:weekSearch by WeekClick to see theprevious weekClick to seethe next weekAs shown in the illustration above, there will be a icon if an agendais set on the date and timing. Click on screen to check or edit thisagenda; Click the corresponding spot of date and time on which youwant to add a new agenda to set it.To create a new schedule, please refer to “Create New Schedule” inthe following text for detailed procedure. Click button on upper rightcorn to exit and return back to Search by Month.Create New ScheduleOperation: In mode of Search by Month, click “Add”, or click timing tagunder mode of Search by Date, or click dating and timing tag undermode of Search by Week to enter into Create New Schedule UI,screen display is shown as in the illustration below:Topic:Date:Tim e:form toPlace:Import:Type:qwertyuiop-asdfghj k lzxc vbn'm[,].\/;-Bspc<EnterCtrlShift CapsClick on the input field on the screen, and a soft keyboard appears asfollows:As shown in the picture, you can choose the input method from the lastbutton at the bottom; click "Handwrite" to change to the handwritinginput state; and click "Hide" to close the small keyboard. Thehandwriting input state is shown as follows:English PinYin WuBi NumHandWriteHide MoveWhen finished, click “Save” to save the revised schedule, then returnback to mode of Search by Month.Delete ScheduleIn mode of Search by Month, click “Delete” button at bottom of thescreen to enter into delete mode, all schedule saved in the systemwill be listed out, screen display is shown as in the illustration below:Input “Subject, Place, Content” you want to set; “Date, Time” can beinput directly, or use adjustment buttons to set; “Priority, Type” can beselected in drag menu underneath them respectively.EnterSpaceüAssn.ChinesePunct. Num.KeyboardMove HideEnglishAs shown in the picture, the middle empty area is the handwriting area.Click the button on the right side to change the input method, and click"Hide" to close the handwriting input panel; click "keyboard" to returnto keyboard input state.conference2006-12-27 from 14:45:36 to 15:30:30Time AllIn this mode, click drag menu after “Time, All” to choose other list,select an agenda to be deleted, Then click button, a dialogueblock will pop up, select “OK” to delete this agenda. Click button atupper right corner to exit Delete mode, then return to mode of Searchby Month.Exit mode of Schedule OrganizerIn mode of Search by Month, click “ ” button at upper right corner ofthe screen to return to main menu of system.
40 4142 43FM60-50-40-30-20-10-0 -X:Satellite ID Y:C/NO[dB-HZ ]87.8MHzReset7894561230AC1/X Function & OperationFunction & OperationFunction & OperationFunction & OperationOperation:FM Transmission (optional)This feature is designed for transmitting the sound of this device at a set frequency to your car FM radio receiver, then you can hear fromyour car stereo system, and get it at volume set by the car stereosystem.Then you may select"Open Channel" or"Close Channel", whenselect "Open Channel",you may also selectdevice speaker on or off.It is suggested to closethe device speaker when"Open Channel" isselected.Open ChannelClose ChannelOpening FM without loudspeakerPress or button, or directly drag the slide bar to set FMtransmission frequency, then turn on car radio FM receiver and tuneit to the same frequency as the transmission, then you may get thesound from the device.Staus Display:When FM transmission is on, you may see an icon on the main menuscreen:FM transmission is on,the device speaker is offFM transmission is on,the device speaker is onFM transmission is off,the device speaker is onIn addition, on main menu, click these icon you may enter into FMtransmission mode directly.GPS TestIt is to check some data, such as the strength of receiving signal, andthe numbers of satellites.Operating method:Baud rate : 4800Sate llite s: 1 pcsLongitude:Time:Orie nta tio n-S tate:Latitu de:Elevatio n:invalidAll information in this interface are instant information. For details, pleaserefer to those of the device.GPS reset:There will be different satellites in different places correspondinglywhen the GPS navigation equipment is receiving the geosynchronoussatellite signal. This is called “Ephemeris”. An ephemeris covers arange of 300KM. When you have set the “Ephemeris” in place A andshut down the equipment to take it beyond 300KM, the equipment willbe in another ephemeris, and start searching for the satellite toascertain the ephemeris. This may cost a lot of time. Clicking "Reset"button before searching would save much time.CalculatorThis device has two calculators: Ordinary and Scientific calculator,able to be switched at any time, a good assistant for your work andstudy.Operation:As shown in the above illustration, the calculators can be used likenormal others. Click “Scientific/Ordinary” on the right to switchbetween Scientific Calculator and Ordinary Calculator; The unit ofcalculation of the right can be taken according to actual demand.Exit Calculator ModeIn Calculator mode, click button at the upper right corner of thescreen to exit and return to system main menu.Title ContentTitleB001 Content_001Notepad FunctionWith the Notepad function, you can record some instantaneous simple information as memo. It is a highly practical function.Operation Procedure:As shown in the above diagram, the pane on the left of the interfaceshows the titles of the saved notes. Click a note title to display the fullcontent on the content pane on the right.Creating a NoteOperation Procedure: On the main interface of the Notepad function,click the button to enter the state of adding notes. The screendisplay is shown in the following diagram:In the system UI open the Tools then find the icon to activate FM.It will be illustrated like below:Warning: Remember to get the device charged to enhance its performance when you activate FM.In the system UI, click the icon to open workbox, then find theicon and click it to entry the function of GPS Testing.It will display as follows:In the system UI, click the icon to open Tools, then find the iconand click it to activate the function of Calculator.In the system UI, click the icon to open Tools, then find the iconand click it to entry Notepad Function. It will show like below:
44 4546 47ݙᆍFunction & OperationFunction & OperationFunction & OperationFunction & Operation㣅᭛ ᣐ䷇ Ѩヨ ᭄ᄫヺো ᠟ݭ 䱤㮣 ⿏ࡼqwertyuiop-asdfghj k lzxc vbn'm[,].\/;-Bspc<EnterCtrlShift CapsThe screen shows the soft keyboard when it is in input state.EnterSpaceüAs shown in the picture, you can choose the input method from the lastbutton at the bottom; click "Handwrite" to change to the handwritinginput state; and click "Hide" to close the small keyboard. Thehandwriting input state is shown as follows:Assn.ChinesePunct. Num.KeyboardMove HideEnglishAs shown in the picture, the middle empty area is the handwriting area.Click the button on the right side to change the input method, and click"Hide" to close the handwriting input panel; click "keyboard" to returnto keyboard input state.Enter the contents, hide the soft keyboard, and click the buttonon the bottom of screen to save the contents, and return to the notepadinterface.Edit/modify Notes SavedOn the main interface of the Notepad function, select the note to bemodified, and then click the button in the lower part of the screento enter the note editing state. The screen display and operation areall the same as “Creating a Note”. After the modification, click the button to save it, and return to the main interface of the Notepadfunction.Deleting a NoteOn the main interface of the Notepad function, select the note to bedeleted, and then click the button in the lower part of the screen.The screen pops up the dialog box to confirm the deletion. Click OK todelete the note.Exiting Notepad FunctionOn the main interface of the Notepad function, click the button onthe upper right corner to exit the Notepad function and return to thesystem main interface.800m300m20m20Km/hAlarm (Optional)The system can give warning of the relevant monitoring devices on roadto alert the safety drive.Operating method:In the system main interface, click button to enter the early warningsystem. The screen is shown as follows:AlarmSetting Style Simulator DataManagerSettingThere are hour modules: Setting, Style, Data manager, and Simulator.Click the icons on the interface to enter the corresponding functions.SettingIt is to enable the early warning function and to set some warningparameters, such as warning distance and mode. As follows:Start Alarm Sound1 Sound2Distance(H)Distance(L)Alarm ModeHave SoundClick “ ” on the left bottom. The tick in the square frame meansthe electronic warning system is enabled; “Distance(H)”: Set the warningdistance in high-speed drive; “Distance(L)”: Set the warning distance inlow speed drive; “Have Sound”: Cancel the warning when there is acertain distance away from the alarm point.Start AlarmStyleThis is to set the type of warning of the warning system, as shown below:StyleRedlightFixationDetectMobileRadarRadonYou can enable different types of warning as required in this interface.SimulatorThis is to simulate the alarm state of all kinds of warning items, asshown below:Radar Fixation Redlight DetectRadon MobileClick the icon on the screen to experience the corresponding alarm.
48 4950 51NandFlash\SDMMC\Function & OperationFunction & OperationFunction & OperationFunction & OperationDataManagerThis function is to add the type of warning and the coordinate manuallyto perfect the warning data. It is a convenient and user-friendly function.The screen is shown as follows:RedlightFixationDetectRadar40Km/hLimitLatitudeLongitudeAdd ResetIf you find the traffic monitoring facilities that the device does not containwhen you are driving, you can add them to the database manually.Operations: First, the device should be in the place of monitoring facility,set the warning system to the above interface, and choose a type ofwarning; then, click “Add” to add it to the database. The warning systemwill give you an alarm next time you pass by this place.Language Backlight Power SoundTime System PentixSystem SettingThis is for system setting to change default setting of the system toyour personal preference.Operation:On system main menu, click icon to enter into system setting.Screen display is shown as the illustration below:In system setting, there 9 items for setting, click directly each item tochange setting for it. Details will be described one by one below.Language SettingThis is for setting of system language, screen display is shown as theillustration below:System SetLanguageClick the icons of thecorresponding languagein this interface orchoose the interfaceproject, the system willsave the setupautomatically when thesetup is closed, and return to the previous menu. (The system will berequired to restart after the interface project is changed.)NOBacklight settingThis is for changing backlight brightness of the device screen display,and time to start screen saver when no operation on the device.Screen display is shown as the illustration below:Then, drag the slide block to set. Select No Screen Saver, then the screensaver will be disabled. After setting, close the current window to save.Power ManagementThis is for setting auto power off and/or power saving mode, and time tostart power off and/or power saving when no operation on the device.In drag menu to select time, select “No” for disabling this feature. Aftersetting, close the current window to save.BacklightPowerBrightness:Screen Time:0Min10SecondCurrent Power:Auto Sleep sleep automaticallySound SettingSoundScreen SoundV lume SoundoSound 01Sound 02Sound 03cus tomi ze SoundNo Soundlick “Screen sound” inthis interface to enableor disable the sound ofscreen operations,“Open TTS” is to enablethe speech broadcastingfunction. TTS speechengine gives a clearbroadcasting of thefunction name everytime you enter into a function. English and Chinese speeches are supported for the moment.You can listen to the sound by clicking the start-up sound directly; andthe general volume can be adjusted by dragging the slide directly.Open TTSThe current customize music is :Project 1 Project 2This function is for setting start-up music, clicking volume and the wholevolume. After entering the screen shows like below:User-defined start-up musicIn the present interface, click " then its dialog windowwill show up, illustrated as below:customize Sound""Nand Flash" is the inside memory of the device, "SDMMC" is the SD card.So the start-up music can be selected from both of them. Select one,clickthe button to confirm, then back to the upper-level interface.
52 5354 55GPSPathcomset\DICT\EBOOK\GPS\MP3\MP4\PICTURE\Function & OperationFunction & OperationFunction & OperationFunction & OperationTime SettingThis is for setting time of the system. After entering into this UI, screendisplay is shown as the illustration below:On this UI, click button on the screen to set. After setting, close thecurrent window to save.TimeYear Mon DayHour Min Second64MB31MBSystem ResourcesThis is for checking system resources:On this UI, click directly at the item on the right to check.SystemInformation ListTotal SDRAMUsable SDRAMDetailsSDRAMStore MemVersionSNCoordinates CalibrationThis is for calibrating the stylus coordinates on touch screen. Afterentering into this UI, screen display is shown as the illustration below:On this UI, use stylus to tap at the center of the cross, then tap onother crosses which will move after each tapping until finish and“Touch Screen Calibration Completed” is shown.Please point the image’s center area correctlyRefre shStartIf there is no logo file in the current SD card, please copy the logo fileinto it or change another SD card having upgrade file, then clickbutton, you may see this upgrade file. During upgrade operation, click button, then a dialogue frame will pop up, shown as theillustration below:Are you sure toupgrade?Then clickbutton to cancel upgrade, or click  to proceedwith the upgrade processing. WINCE_GPS.exeWINCE_GPS.exeSelect GPS SoftwareIf there are two or more maps from different companies on an SD card,then this feature can help you select each of them easily.The way to Select: In SD card directory, open the file folder to find themap to be used, select navigation software of .exe.The selected pate of navigation at present is:Are you sure to change the path into this path?Note: The extension of the GPS file must be “.exe”.OK Cancel(which has different names from each different company, please referto details from each company of these navigation software. e.g.Careland has WINCE_GPS.exe), then select and click button, a dialogue frame will pop up on screen, as it shown below:WINCE_GPS.exeThe selected path of navigation at present is:Then click "Cancel" button to abort; click "Cornfirm" to accept, thendisplay on screen will be:Click button on the upper right corner to return to GPS path UI.BackGPSpathFlashOpen GPS recordUpdate LogoThe function is for updating start-up logo of the device. Please be surethat you have stored the Logo pictures into the SD card. After enteringinto this UI you will see the interface shown below :Using this function is to set GPS path for your navigation. Screen displaywill show as follows:Files listed on the present screen belong to the saved ones in SD card,so click them can read the file.Warning: please be sure that the battery is being full when you are updating. If not, please get the device charged.
56 5758 59Qxios Hibernate 1.40 OKXi30848 ݙᄬぎ䯈 䞞ᬒࠡ31032 ݙᄬぎ䯈 䞞ᬒৢ184 KB Ꮖ䞞ᬒFunction & OperationFunction & OperationReturning to Win CE DesktopThe device can return to the Win CE by pressing one key and implementthe PDA functions.Operation Procedure:On the system main interface, click the icon and the screen popsup the confirmation dialog box. Click OK to return to the Win CEdesktop. At this time, you can perform relevant operations.Return to the navigation system from the Win CE desktop:On the Win CE desktop, click the icon to start the navigationsystem.Car-backing Rear View FunctionThis function is a fully automatic function. No manual operation is needed.Equipment Installation:The receiving device of car-backing rear view is installed on the seat ofthe navigator. In that regard, before the use of the device, it should beinstalled on the vehicle mount bracket. The rear view camera should beinstalled in the professional vehicle refit shop.This function needs the navigator as monitor. In that regard, when thecar-backing rear view function is enabled, do not turn off the navigator.Once the vehicle is engaged in the backing gear, the navigator receivesthe signals, and automatically switches to the display image of the rearview camera. When the vehicle is not engaged in the backing gear, thenavigator will switch to the previous work mode automatically.Video Input FunctionThe device supports the video input function. The video signals outputtedby another device are transmitted to the device through a video cable. Thedevice can work as monitor. Without any operation, the device will detectautomatically the input of the vide signals, and will automatically switchthe current function to the video display state. After the connecting cableis disconnected, the system will return automatically to the previous workmode.ServicesServicesOperation procedure may interfere files in SD card , causing irrationality,due to long operation of the device, and the whole efficiency is likely to beinfluenced. In that case , we can apply the function“ Allocating files in SDcard ’’ to optimize configuration of files in SD card, in order to enhance thewhole running efficiency .Operation:In the main system interface, click the button up on the screen, thenit will automatically show the window of allocating files in SD card, and theresult of the optimization will show as follows:GPS CMMB Video Music BluetoothFlashAt this moment, click button "OK" to close the present window.USBUSBACTIVESYNCThis is to set the mode when the USB interface of the device is connectedto the computer, in which “U disk” is to set the device as the portablememory, and “ACTIVESYNC” is to use the device for program debug.Pictures are shown as below:Click the desired connection mode and close the window to save thechosen mode.MASS STORAGEOn system main menu, click icon to enter into Game.Screen display is shown as the illustration below:GameInthisstateclickthegameicononthescreentoenterthegameFordetailsonhowtoplaythegameseethehelpinformationthatwillbeavailableafteryouenterthegameGameMinegame CHChess DouDiZhuGobangAV-IN SetEffect of videoNormalHorizontal mirrorVertical mirrorRotate in 180PocketLianMah-johng Military Chess Jump ChessAV-IN (Need to be equipped with camera)You can adjust the direction of the image displayed in the camera underAV-IN, it will illustrate as follows:Under this interface you can select the items below the Effect of videodirectly, and then click it to exit the function.Allocating files in SD card
60 6162How to save and allocate files in SD card:Usually, the files used by the device are saved in the appointed foldersto ensure the access for embedded program of the device. You maysave files into other folders or under root directory of the SD card. If the files are saved in the appointed folders, when opening thecorresponding application, these files can be seen directly; If not in thefolders, then you can not see them for the application, so that you needto click “Search” button, the system will search in all files inun-appointed folders until find it and display the result of search. Forthe sake of convenience, it is strongly suggested to save the files intothe corresponding folders. The function and application of folders inSD card is listed below:eBook FileNavigation FileMusic FileVideo FilePhoto FileAttention: Navigation software must be saved into GPS directory!ServicesServices ServicesSpecificationsCPUMemoryChipAntennaMemory CardScreen TypeScreen SizeScreen ColorDot Matrix DisplayExtension SlotBattery TypeBattery CapacitySiRF$tlas,9* %* %* %GRF3iBuilt-in folded antennaApplicable for a Maximum up to 8GBSD cardTFT Touch Screen4.3"/4.8"/5.0"65K colors480*272SDRemoveable Li-ploymer batter950mAhTrouble Shooter No. Fault Possible Cause SolutionsNo power onDead UnitError in upgradeImpossible torechargeBattery drained (The screenhas no further display after a blink when pressing power onbutton.)The start interface stays onthe screen for long timewithout changing.No display of the screen, ordisplay on screen is frozen asany button is pressed.Dead or frozen duringupgrade, display on thescreen is frozen and nobutton works.During charging, the greenLED indicator of the devicehas no light or no chargingsign displayed on the screen.Please refer to the description of batterycharging in this manual, only use theenclosed charger to charge the device.Take out the battery, then put it back, startthe device again.Press and hold the power on button for 5 seconds, then release it to power on.This fault can only be fixed by themanufacturer. Please return for repair.If the charger is connected properly andpowered.Charger is damaged.Battery is damaged or full charged.It is normal when the green LED is lit on butthe charging sign is not on the screen at thesame time during charging.Take out the battery, then put it back, startthe device again.

Navigation menu