APICAL TECHNOLOGY A4301 GPS Portable Navigation with FM Transmitter User Manual

APICAL TECHNOLOGY (HK) CO., LTD. GPS Portable Navigation with FM Transmitter

UserManual.wiki >

APICAL TECHNOLOGY >

A4301 User Manual HTML Version

User Manual

V43H01

GPS Portable

Navigation Device

User Manual

Please read this manual before you start using this device

Thanks for purchasing our product. Please read this manual carefully

before starting to use this device. When you use this device, you are

supposed to learn well of this product.

The information in this manual has been verified for its accuracy. But

no liability will be applied for the correctness of mapping data of

navigation, technical and/or editorial interpretation or illustration, or

the printing and translation of this manual, nor liable for any

consequence or incidental damages caused by using this manual.

This device is a complicated technical product consisting of OS and

third party software. The manufacturer has paid sufficient attention to

and fulfill its duty in its hardware manufacture processing and in

development and/or application of the software so as to ensure the

device work properly. If there is any malfunction or defective of the

device, the manufacturer will provide a warranty for the congenital

quality problem, but not covering for any loss or damage of property,

or any consequence caused by or related to using this device.

The navigation software and mapping data is provided by a third party.

Its copyright is protected by laws. A User can only use on this device,

any copying or application of the software for other purpose is not

allowed.

No explicit and/or implicit guarantee or assurance will be applicable

for the validity, integrity, correctness, accuracy of mapping data for

navigation used on this device, nor liability for any loss, damage,

and/or any consequence caused by or related to defective mapping

data or software used on this device.

The copyright of this manual is owned by the company and protected

by laws. Any copy or translation of whole or part of its content,

including words, figures, signs, phonetic index, etc., is only allowed

for the individual customer's reference, but not for public circulation,

or other legal and/or commercial purpose. The company reserves the

right for final interpretation of this manual.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference,

and (2) this device must accept any interference

received, including interference that may cause

undesired operation.

FCC ID:XXXYYYY

Changes or modifications not expressly approved by the party

responsible for compliance could void the user's authority to operate

the equipment.

NOTE: This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a

particular installation.

If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or

more of the following

measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help.

GPS CMMB Bluetooth

Med ia Player

00:00

Warnings:

Please install the device in a right way to avoid driver's sight and

airbag to be hindered. Any loss or damage of product, passengers, or

other property caused by mistakes of mounting or installing of the

device will be not covered within the warranty and not be the

responsibility of the manufacturer.

Please not put on earphone and operate the device when you drive or

ride a bike to ensure your safety.

Please consult with airline crew for application of the device if you

want to use it during flight.

Please keep the device far away from strong magnetic field which may

cause damage or malfunction to the device

Please protect the device from being dropped, shocked or scratched

on or by hard objects to avoid possible damages (scratches on the

device face, loose contact of the battery, data loss or other hardware

part broken) to the device

Please not use earphone with a continuous and large volume for long

time, set the volume at a moderate loudness and use it not for a long

time to avoid possible damage to your ear audibility

Please not use chemical solution or cleaner to clean the device to

avoid possible damage to the paint and polish of its surface

When the device is used as a mobile storage device, please follow

right procedures of file management operation to copy or transfer files.

The warranty does not cover any mistake, or damage, or loss of files

It will be better for you to make a backup copy of your personal files in

the device into your PC or laptop in time

It is prohibited to use higher voltage power supply, to bent or squeeze

the power cord with big force so as to avoid possible damage and

overheat resulting in fire

Never use wet hands to pull out or plug in the power plug to avoid

possible electric shock

Not use the device in an environment over 60?, or below -10?,and

with high humidity as well

The content of this manual is subject to definition, or interpretation, or

modification from time to time for improvement on features and

function without prior notice.

Function DescriptionFunction Description

Features:

Most popular Windows OS, World class CPU

SD card of extensible capacity for mapping data, MP4 video, MP3

music, Photo, and personal files

Map for major large and medium scale cities, detailed mapping data,

real voice guidance, automatic smooth switching

Built-in high sensitive GPS receiving module and antenna, Faster

GPS signal receiving and More accurate positioning

Prompt and accurate positioning applicable for GPS data collection,

e.g. Area measuring

Prompt response for both cold and warm start; Re-capture of GPS

signal just in 1 second on average, Accuracy of positioning: no more

than 10 meters; Accuracy of timing: no more than 1 microsecond

Embedded Organizer/Calendar, personalized friendly touch panel

handwriting control, record and plan personal schedule

Multimedia entertainment: Flash display, MP3 music, MP4 video,

Photo viewing

Scientific calculation: embedded calculator, a good business assistant

Personalized function setting˖Language selection, Backlight

brightness adjustment; Power management, Coordination calibration

The FM transmitter designed for use in a car with car stereo is not

controlled with volume of the device.

A user friendly feature is GPS "hold On". With this feature, you may

use the device for other applications, like music, e-Book, except for

Falsh, by pressing Return button on the device to switch GPS

application to background and keep it running without exiting from

GPS application during the same time.

Ultra large, high-definition, and true color display, touch screen

operations with handwriting input.

Professional portable navigation system, interface design of car electronic

products, changeable theme interface, and convenient operations.

Illustrations on screen display:

In this interface, click the icons on the screen to enter the corresponding

functions; and click the arrow on the right bottom to turn the page. There

will be an animation effect when turning the page.

Function Description Function Description

System UI(Projector Screen)

Under this UI, click icon down the screen to enter the function page.

Then there will be Looped playback of cartoon, click it to entry this

function. If you click the icons beside the function icon you can enjoy

the cartoons. If you click the arrow up the corner you can turn pages to

view, which accompanies the cartoon at the same time.

Secondary UI(Projector Screen)

eBook Alarm

Language Backlight Power Sound

Time System Co.adjust

The following content is tips for GPS device application and

operation. Please read it before starting use of the GPS device,

so that you may make a better use of the GPS device.

While the GPS device is working, it receives sig al from satellites for

positioning. The signal from satellite may not be received, or be

weakened in room, nearby some big buildings, or under overhead

bridges.

When the GPS device is receiving satellite signals, you will get sig als

from different satellites when you are in different places, this is called

"Satellite Path", a "Satellite Path" only covers a range of 300 KM. If a

"Satellite Path" is defined at place A, then turn off the device and move

to another place beyond 300 KM away from A, the device is under

another "Satellite Path", At this moment, the device needs to search

for satellite signal again. To track the new "Satellite Path", this will

take quite a long time. To save time for this searching, you may click

"GPS Reset" button in menu of "GPS Testing" to clear the previous

“Satellite Path".

It will be difficult and taking more time to catch positioning sig al from

satellite during high speed driving. It is suggested to search the

positioning signal by stoping your car for a better and safer effect.

While charging the device, please only use the travel charger or car

charger equipped by the manufacturer in its original package. Other

chargers may cause damage to this device, and this damage is not

covered by our warranty.

Bluetooth is optional.

10 11

Battery Status Icon:

Full Drained

When the battery is at low power level, please charge it

immediately to ensure the device work normally

Charging:

Warnings for charging:

1. A new battery may be empty and not charged before you get the

device.

2. To achieve the best performance of the battery, it is better to charge

it up to 8 hours in the first three times, but not over 16 hours.

3. In normal charging with DC charger, please make sure to charge it

for 2 – 2.5 hours to get it fully charged.

A new battery will reach its best performance after a number

cycles of charging and discharging.

If the device is not used for long time, it is better to charge

it to full capacity every 2 or 3 months during storage.

If not using the device for a long time, it is wise to take out

the battery.

Charger Application:

DC Charger:

Take out the DC charger, plug it into the wall outlet with AC 220V(100V

~240V), then plug in the DC jack into the device DC-in jack.(see the

illustration below).

Car Lighter Charger:

Please insert the car charger into car cigarette lighter jack, then plug

into the USB jack(see the illustration below).

Inserting into car

cigarette lighter jack

USB jack

When you use car charger, please start car engine first, then

connect it to the device to avoid possible damage to the

device due to overloaded pulse current during ignition.

Please pull it out when you stop the engine, and plug it in

again after next ignition.

Power On the device

In power off status, slide the power switch to "ON" position to turn on

the device, then the OSD will be displayed on screen.

Battery

Power On/Off the device Function & Operation

Sleeping & Power –off

In power-on mode, press the power button on the device for 3-5 seconds

then the sleeping mode or confirmation for power-off screen will display

as follows:

In this UI click the button will be in sleeping mode, click the button

will power off ; click the button to exit the UI and back to

normal operation.

Waking -up from the sleeping

When in sleeping mode, a short press on the power-on button of the

device will wake up the system.

When in sleeping mode, all the procedure in operation will

pause but will back to normal status after waking up.

The clevice will be power off in

In this interface, click the small icon to switch to the corresponding page.

Then, an animation is played circularly on the screen. Touch the screen

or the small icon on the bottom to enter the function, and click the arrow

on the right bottom to turn the page. There will be an animation effect

when turning the page.

In this interface, click the icons on the screen to enter the corresponding

functions; and click the arrow on the right bottom to turn the page. There

will be an animation effect when turning the page.

Two kind s of the me interf ac es are avail able. To ch ange the the me,

change it in the language setup under the system se tup .

Secondary UI (Green background)

System UI (Green background)

Language Backlight Power Sound

Time System Co.adjust

Function Description

12 13

14 15

01 CMMB-601

02 CMMB-602

03 CMMB-603

2238/4875

Preset channel list

In the preset channel list, click or button to turn the page

to view the saved channels, and click the channel below directly to start

playing.

Exit the mobile TV play

Click the button on the right top of the screen when playing CMMB

mobile TV to close the playing.

In the following interface:

Click button to search the channels again and save them in the

preset channel list for convenient watching. Click or to adjust

the volume, and click button to turn the device to the mute mode,

then, the button is changed to ; click the button to resume the

volume. Click button to play the video in full height screen, and

button to play in full width screen. In full screen playing, click the next

program to return to normal play.

Progress:

FLASH

Operation:

FLASH Play

This is for Flash file playing.

On system main menu, click icon, to get into Flash playing

mode,then file selection UI will be shown on screen:

on this UI, click button to search Flash files not in selected folder;

click button to close this window and exit Flash palying mode;

double click, or select then click button to open thie selected file.

Flash file 1.wmv

Flash file 2.wmv

Flash file 3.wmv

Flash file 4.wmv

Function & OperationFunction & Operation

Picture-in-Picture (Optional Function)

Under normal playing status, click the button to fulfill “Picture-in-

Picture ’’ function. At this moment, only the present screen will appear,

the other icons will be hindered. The display is as follow:

In this UI, the playing screen will show the video picture at the proportion

of 3:4. Pressing the right corner of the video picture then drag it to minify

of magnify the proportion of the picture. If you press other places of the

picture, you can drag it on the screen as you wish. Under Picture-in-

Picture state, you can watch mobile TV while playing game or setting up

other functions. Since the size of the video can be changed and moved,

functions will not interfere with each other.

GPS CMMB Video Music Bluetooth

Flash

Channel List

In the saved channel list, click the button to view the saved

channels, and the button will change to , click it to exit the

channel list .

CMMB Mobile TV

CMMB, short for China Mobile Multimedia Broadcasting, is specialized

in the small screen handheld terminals including MP4, mobile phone,

GPS, USB receiver, and standalone receiver, providing services of DVB

-T programs, integrated information, and emergency broadcasting,

which realizes the overall coverage of satellite transmission and the

ground network. Use the self-intellectual mobile multimedia broadcasting

technology, the system can be operated, maintained, and managed.

Broadcasting and double-direction services are available. The CMMB

supports the operating system of combining the central and local

operations, and with the encrypted entitled control and management

system. Besides, it also supports the united standards and operation,

and the countrywide roaming.

Operating method:

Click icon in the system main interface to enter the CMMB player.

A dialogue box appears when entering, which indicates “All other programs

will be closed when CMMB is used”. Click "OK" to enter the player. The

screen is shown as follows:

The system searches the channel automatically when it enters the player,

and saves the searched radio channels in the preset channel list on the

right side.

Function

button

Preset

channel list

16 17

18 19

Video Playback

Operation:

On system main menu, click icon to enter into Video Playback

application.Display of UI for file selection:

This feature is for video file playing, with the formats: AVI, MPEG,

MPG, ASX, DAT,ASF and WMV.

video file 1.wmv

video file 2.wmv

video file 3.wmv

video file 4.wmv

Video

On this UI, click button to search video files not listed in the

appointed video file folder; Click button to close and exit from Video

Playback application; Double click or select and click button to

open and play this file.

UI and button definition:

Play

Pause

Stop

Full screen display

Play Progression, drag to a point to start play

Volume tune, click anterior to set into mute

status, click it again to resume

In full screen display, the tool bar at screen bottom will be

hidden, you can slightly tap on screen to get it.

It will take a few minutes to search fies when video play

mode starts if this application has not been used for a

long time.

Function & OperationFunction & Operation

Video_01rm

Video_02rm

Video_03rm

Video_04rmvb

16:9

RMVB Player

This function is special for RM and RMVB files.

Operation:

In the system UI, click the to entry the function of Media

player, then click the "RM" to enter into the Video Player. And the

screen will display as follows:

icon

In the present UI, click the button to search the video files which

you have saved beforetime. Click the button to exit the rmvb player,

double-click the file you select or click the button you can open

the file.

RMVB Player

In full screen, tool bar will be hidden at screen bottom,

you may get it by tapping on the screen.

Control buttons in playing mode:

:Play, in Pause or Stop mode, press this button to play;

:Pause, in Play mode, pressing this button to pause;

:Stop, in Play mode, pressing this button to stop;

:Fast Forward, in Play mode, pressing this button to get fast forward once;

:Fast Retreat, in Play mode, pressing this button to fast retreat once;

:Full Screen, pressing this button for full screen paly;

:Return, pressing this button to return back to system main menu from playing

mode;

status the sound icon will change to Click the mute icon to

back to its normal status and the sound icon will back to at

the same time.

Sound Settings, Click the button to change into mute, in which

20 21

22 23

Function & OperationFunction & Operation

Music

music 01

music 02

music 03

music 04

music 05

This is for Music Playback with format of MP3, WMA, WAV.

Music Playback

Operation˖

On system main menu, click icon to play music. Screen display

is shown as the illustration below:

On this UI, click button to search for music files not in selected

folder; click button to close this window and exit musi play mode;

double click, or select then click button to play this music file.

Music play mode is displayed as following diagrams:

In music play mode, click button to pause, then it becomes Play

Button ; At this time click button, music play mode will

return again; click button to stop; click button to jump to

the next one,click button to jump to the previous one;click

button to switch Repeat mode; click button to set mute, then this

button will become , click again to recover.

Button and control in Play Mode:

Exit from Music play

Click button at the upper right corner to exit.

image 01jpg

image 02bmp

imagegif

Photo Display

This is for Photo Display with format JPG stored in an SD card.

Operation:

On system main menu, click icon to enter into Photo Display

function. Display of UI for file selection:

On this UI, click button to search photo files not listed in the

appointed photo file folder; click button to close current UI and exit

Photo Display function; double click or select then click button to

open or play this file. Display shown as the right illustration:

⬠䴶ᣝ䪂ࡳ㛑˖

16:9

:Play

:Pause

:Stop

:Close

:Next File

:Former File

:Full Screen Display (the suitable screen size)

:Full screen Display (Stretch to the whole screen)

Player Progress,Drag the line to change the player

progress.

Volume Regulating Click the button to change to

Mute, click it again to its normal status.

Warning: when it plays in full screen, the tool bar down

the screen will be hidden. If you tap the screen,

the tool bar will show.

28 29

30 31

Function & OperationFunction & Operation

7763OD\

eBook Reading

This if for eBook Reading with format .txt stored in an SD card.

Operation:

On system main menu, click button to enter into eBook Reading

application. Display of UI for file selection:

Click or button to turn page up or down; “Manual/Automatic”

is set for selecting Manual or Automatic page turning; Font is for

selecting letter size of display.

Close button

Bookmark button

Jump button

Search button

Previous button

Next button

On this menu, click button to search for txt files not in selected

folder; click button to close this window and exit file reading mode;

double click button, or select then click button to open this file.

The screen display is shown as follows:

E-Book

eBook 01txt

eBook 02txt

eBook 03txt

eBook 04txt

eBook 05txt

eBook 06txt

eBook 07txt

Auto Manu Big font Small font

This software is the property of Corel Corporation

and its licensors and is protected by copyright.

Any reproduction in whole or in part is strictly

prohibited.

Corel, CorelDRAW, Corel R.A.V.E., CorelPHOTO-

PAINT, CorelTRACE, and Corel CAPTURE are

trademarks or registered trademarks of Corel

Corporation and/or its subsidiaries in Canada,

the U.S. and/or other countries.

Imaging Technology provided under License by

TTS Setting

ℸᯊ⚍ߏᣝ䪂ˈৃҹЎᔧࠡⱘ义䴶ֱᄬϔϾкㅒǄⳈ᥹೼

ᇍ䆱⚍Ḛݙৃ⚍ߏ䗝ᢽᏆֱᄬⱘкㅒˈ䗝Ёৢ⚍ߏᣝ䪂ৃ

ߴ䰸䖭Ͼкㅒ˗⚍ߏᣝ䪂ৃ䏇䕀ࠄ䖭Ͼкㅒ᠔೼ⱘ义䴶Ǆ

⚍ߏᣝ䪂䗔ߎкㅒ䆒㕂䖨ಲℷᐌ䯙䇏⢊ᗕǄ

Bookmark

This is for bookmark in reading a voluminous article, marking or

jumping to the last time marked page, a humanized design for

convenience while reading.

Operation:

In eBook Reading mode, click right

button to enter into bookmark setting,

display of dialogueblock is shown as in the

illustration below:

Jump to the appointed page

This is for jumping to the appointed page when reading a voluminous

article and no bookmark is set.

Operation: In eBook Reading mode, click right button to enter into

Jump function, display of dialogue block is shown as in the illustration

below:

Click the number key on screen to input the page number to jump to,

when inputting, click button to backspace for deleting; click

button to clear input block, after inputting page number click button

to jump to the page of selected number.

56789

01234

Search for specific word or phrase in eBook

This is for searching a specific word or phrase in the current reading

article. In eBook Reading mode, click right button on screen to

jump out from the dialogue block shown as in the illustration below:

Check

Exit

Che ck cu rren t page

Check all

qwertyuiop

-asdfghj k l

zxc vbn

[

]

;

-Bspc

Enter

Ctrl

Shift Caps

Enter

Space

ü

Click on the input field on the screen, and a soft keyboard appears as

follows:

As shown in the picture, you can choose the input method from the last

button at the bottom; click "Handwrite" to change to the handwriting

input state; and click "Hide" to close the small keyboard. The

handwriting input state is shown as follows:

English PinYin WuBi Num

HandWrite

Hide Move

Assn.

Chinese

Punct. Num.

Keyboard

Move Hide

English

As shown in the picture, the middle empty area is the handwriting area.

Click the button on the right side to change the input method, and click

"Hide" to close the handwriting input panel; click "keyboard" to return

to keyboard input state.

Enter the desired characters and click "Next" to start searching. Click

this button again to search for the next one if the result is not up to the

demand.

Then, click or button to select previous or next photos; click

or button to zoom in or zoom out photo; click button for

full screen display. In full screen display, tap the screen again to exit

full screen display; click button to select display of different

percentage;Click the button you can Ctrl-Shift-R or Ctrl-R the

photo. is for selecting to set automatic or manual mode to turn

page of display.

Click the button on upper right corner to exit.

Exit Photo Display

Operation under photo view

32 33

34 35

Function & OperationFunction & Operation

Schedule Organizer

This is to Add, Edit, Delete schedule, and display the schedule in week,

month, enable the user to find the scheduled agenda conveniently.

Operation:

January 2007

Sun Mon Tue Wed Thu Fri Sat

Scheduler

Click to see

previous month

Click to see

next month

“Add” button

“Week” button “Delete” button

The screen display is in month display mode. The date to be completed

for the matters on screen show in red color. Click the date to enter into

day display mode; click “Week” to enter into week display mode.

Search by Date

Select and click a date on the screen to enter into Date display mode.

Screen display is shown as in the illustration below:

In the system UI,click the icon to open Tools, under which you

can entry the Schedule by clicking the icon The illustration will

show like below:

∝㣅ᄫᑧ

BACK

EDFN

EDFNDOOH\

%DFN%D\

EDFNEHQFKHU

EDFNEXVWLQJ

EDFNFDOO

EDFNFKHFN

EDFNFUDZO

EDFNHQG

back

adj.

ৢ䴶ⱘ ೼ৢ䴶 ᮽ䖛এⱘ ࠡ

⃴ⱘ䪅

adv

৥ৢഄ

n

㚠䚼 ৢ䴶

v

ৢ䗔 ᬃᣕ

At this time, enter the word to be queried. After that, click the

button and the screen will pop up the query result.

Enter

Space

ü

As shown in the picture, you can choose the input method from the last

button at the bottom; click "Handwrite" to change to the handwriting

input state; and click "Hide" to close the small keyboard. The

handwriting input state is shown as follows:

Assn.

Chinese

Punct. Num.

Keyboard

Move Hide

English

As shown in the picture, the middle empty area is the handwriting area.

Click the button on the right side to change the input method, and click

"Hide" to close the handwriting input panel; click "keyboard" to return

to keyboard input state.

Related word

Smart

In this state, double-click the word in the intelligent input field on the

left directly to view the query result.

Exiting Dictionary Translation

On the main interface of the Dictionary Translation function, click the

button on the upper right corner to exit the Dictionary Translation

function and return to the system main interface.

∝㣅ᄫᑧ

Dictionary

The device provides built-in English-Chinese and Chinese-English

dictionaries. The vocabulary is large. Intelligent text input is supported.

Dictionary

Related word

Smart

After you enter the Dictionary Translation function, click the drop-down

button behind the dictionaries, as shown in the diagram above. Select

and change the Chinese-English or English-Chinese dictionary saved

on the SD card and load it onto the program, facilitating the Chinese

-English translation function. During text input, the list of words with

the same initial as the inputted letter in the intelligent input field. Click

the word directly in the intelligent input field to view the translation

result.

Input/Search

qwertyuiop

-asdfghj k l

zxc vbn

[

]

;

-Bspc

Enter

Ctrl

Shift Caps

Click on the input field on the screen, and a soft keyboard appears as

follows:

English PinYin WuBi Num

HandWrite

Hide Move

Operation:

In the system UI, click the icon to open the "Tools”, then click

the icon to enter the Dictionary function.

TTS speech broadcasting

TTS speech broadcasting function is able to read the article you are

browsing. Click button to set the parameter of speech broadcasting

as follows:

TTS speech speed, tone, and volume are available to be adjusted. Click

"OK" to save the setup and close the window when everything is set.

Click button to read the articles; the page will be turned automatically

when reading.

Speed

Tone

Volume

Sun Mon Tue Wed Thu Fri Sat

Dec

36 37

38 39

Function & OperationFunction & Operation

12-27-2006

Click to see

the previous day

Click to see

the next day

Click time tag on date screen to check and revise a stored schedule or

agenda. If the time tag is blank, then click it to set up a new schedule

or agenda.

To create a new schedule, please refer to “Create New Schedule” in

the following text for detailed procedure. Click button on upper right

corn to exit and return back to Search by Month

Click “Week” button to enter into display mode.Screen display

is shown as in the illustration below:

week

Search by Week

Click to see the

previous week

Click to see

the next week

As shown in the illustration above, there will be a icon if an agenda

is set on the date and timing. Click on screen to check or edit this

agenda; Click the corresponding spot of date and time on which you

want to add a new agenda to set it.

To create a new schedule, please refer to “Create New Schedule” in

the following text for detailed procedure. Click button on upper right

corn to exit and return back to Search by Month.

Create New Schedule

Operation: In mode of Search by Month, click “Add”, or click timing tag

under mode of Search by Date, or click dating and timing tag under

mode of Search by Week to enter into Create New Schedule UI,

screen display is shown as in the illustration below:

Topic:

Date:

Tim e:form

Place:

Import:

Type:

qwertyuiop

-asdfghj k l

zxc vbn

[

]

;

-Bspc

Enter

Ctrl

Shift Caps

Click on the input field on the screen, and a soft keyboard appears as

follows:

As shown in the picture, you can choose the input method from the last

button at the bottom; click "Handwrite" to change to the handwriting

input state; and click "Hide" to close the small keyboard. The

handwriting input state is shown as follows:

English PinYin WuBi Num

HandWrite

Hide Move

When finished, click “Save” to save the revised schedule, then return

back to mode of Search by Month.

Delete Schedule

In mode of Search by Month, click “Delete” button at bottom of the

screen to enter into delete mode, all schedule saved in the system

will be listed out, screen display is shown as in the illustration below:

Input “Subject, Place, Content” you want to set; “Date, Time” can be

input directly, or use adjustment buttons to set; “Priority, Type” can be

selected in drag menu underneath them respectively.

Enter

Space

ü

Assn.

Chinese

Punct. Num.

Keyboard

Move Hide

English

As shown in the picture, the middle empty area is the handwriting area.

Click the button on the right side to change the input method, and click

"Hide" to close the handwriting input panel; click "keyboard" to return

to keyboard input state.

conference

2006-12-27 from 14:45:36 to 15:30:30

Time All

In this mode, click drag menu after “Time, All” to choose other list,

select an agenda to be deleted, Then click button, a dialogue

block will pop up, select “OK” to delete this agenda. Click button at

upper right corner to exit Delete mode, then return to mode of Search

by Month.

Exit mode of Schedule Organizer

In mode of Search by Month, click “ ” button at upper right corner of

the screen to return to main menu of system.

40 41

42 43

60-

50-

40-

30-

20-

10-

0 -

X:Satellite ID Y:C/NO[dB-HZ ]

87.8MHz

Reset

789

456

123

1/X



Function & OperationFunction & Operation

Operation:

FM Transmission (optional)

This feature is designed for transmitting the sound of this device at a

set frequency to your car FM radio receiver, then you can hear from

your car stereo system, and get it at volume set by the car stereo

system.

Then you may select

"Open Channel" or

"Close Channel", when

select "Open Channel",

you may also select

device speaker on or off.

It is suggested to close

the device speaker when

"Open Channel" is

selected.

Open Channel

Close Channel

Opening FM without loudspeaker

Press or button, or directly drag the slide bar to set FM

transmission frequency, then turn on car radio FM receiver and tune

it to the same frequency as the transmission, then you may get the

sound from the device.

Staus Display:

When FM transmission is on, you may see an icon on the main menu

screen:

FM transmission is on,

the device speaker is off

FM transmission is on,

the device speaker is on

FM transmission is off,

the device speaker is on

In addition, on main menu, click these icon you may enter into FM

transmission mode directly.

GPS Test

It is to check some data, such as the strength of receiving signal, and

the numbers of satellites.

Operating method:

Baud rate : 4800

Sate llite s: 1 pcs

Longitude:

Time:

Orie nta tio n-S tate:

Latitu de:

Elevatio n:

invalid

All information in this interface are instant information. For details, please

refer to those of the device.

GPS reset:

There will be different satellites in different places correspondingly

when the GPS navigation equipment is receiving the geosynchronous

satellite signal. This is called “Ephemeris”. An ephemeris covers a

range of 300KM. When you have set the “Ephemeris” in place A and

shut down the equipment to take it beyond 300KM, the equipment will

be in another ephemeris, and start searching for the satellite to

ascertain the ephemeris. This may cost a lot of time. Clicking "Reset"

button before searching would save much time.

Calculator

This device has two calculators: Ordinary and Scientific calculator,

able to be switched at any time, a good assistant for your work and

study.

Operation:

As shown in the above illustration, the calculators can be used like

normal others. Click “Scientific/Ordinary” on the right to switch

between Scientific Calculator and Ordinary Calculator; The unit of

calculation of the right can be taken according to actual demand.

Exit Calculator Mode

In Calculator mode, click button at the upper right corner of the

screen to exit and return to system main menu.

Title Content

TitleB001 Content_001

Notepad Function

With the Notepad function, you can record some instantaneous simple

information as memo. It is a highly practical function.

Operation Procedure:

As shown in the above diagram, the pane on the left of the interface

shows the titles of the saved notes. Click a note title to display the full

content on the content pane on the right.

Creating a Note

Operation Procedure: On the main interface of the Notepad function,

click the button to enter the state of adding notes. The screen

display is shown in the following diagram:

In the system UI open the Tools then find the icon to activate FM.

It will be illustrated like below:

Warning: Remember to get the device charged to enhance

its performance when you activate FM.

In the system UI, click the icon to open workbox, then find the

icon and click it to entry the function of GPS Testing.

It will display as follows:

In the system UI, click the icon to open Tools, then find the icon

and click it to activate the function of Calculator.

In the system UI, click the icon to open Tools, then find the icon

and click it to entry Notepad Function. It will show like below:

44 45

46 47

ݙᆍ

Function & OperationFunction & Operation

㣅᭛ ᣐ䷇ Ѩヨ ᭄ᄫヺো ᠟ݭ 䱤㮣 ⿏ࡼ

qwertyuiop

-asdfghj k l

zxc vbn

[

]

;

-Bspc

Enter

Ctrl

Shift Caps

The screen shows the soft keyboard when it is in input state.

Enter

Space

ü

As shown in the picture, you can choose the input method from the last

button at the bottom; click "Handwrite" to change to the handwriting

input state; and click "Hide" to close the small keyboard. The

handwriting input state is shown as follows:

Assn.

Chinese

Punct. Num.

Keyboard

Move Hide

English

As shown in the picture, the middle empty area is the handwriting area.

Click the button on the right side to change the input method, and click

"Hide" to close the handwriting input panel; click "keyboard" to return

to keyboard input state.

Enter the contents, hide the soft keyboard, and click the button

on the bottom of screen to save the contents, and return to the notepad

interface.

Edit/modify Notes Saved

On the main interface of the Notepad function, select the note to be

modified, and then click the button in the lower part of the screen

to enter the note editing state. The screen display and operation are

all the same as “Creating a Note”. After the modification, click the

button to save it, and return to the main interface of the Notepad

function.

Deleting a Note

On the main interface of the Notepad function, select the note to be

deleted, and then click the button in the lower part of the screen.

The screen pops up the dialog box to confirm the deletion. Click OK to

delete the note.

Exiting Notepad Function

On the main interface of the Notepad function, click the button on

the upper right corner to exit the Notepad function and return to the

system main interface.

800m

300m

20m

20Km/h

Alarm (Optional)

The system can give warning of the relevant monitoring devices on road

to alert the safety drive.

Operating method:

In the system main interface, click button to enter the early warning

system. The screen is shown as follows:

Alarm

Setting Style Simulator DataManager

Setting

There are hour modules: Setting, Style, Data manager, and Simulator.

Click the icons on the interface to enter the corresponding functions.

Setting

It is to enable the early warning function and to set some warning

parameters, such as warning distance and mode. As follows:

Start Alarm Sound1 Sound2

Distance(H)

Distance(L)

Alarm Mode

Have Sound

Click “ ” on the left bottom. The tick in the square frame means

the electronic warning system is enabled; “Distance(H)”: Set the warning

distance in high-speed drive; “Distance(L)”: Set the warning distance in

low speed drive; “Have Sound”: Cancel the warning when there is a

certain distance away from the alarm point.

Start Alarm

Style

This is to set the type of warning of the warning system, as shown below:

Style

Redlight

Fixation

Detect

Mobile

Radar

Radon

You can enable different types of warning as required in this interface.

Simulator

This is to simulate the alarm state of all kinds of warning items, as

shown below:

Radar Fixation Redlight Detect

Radon Mobile

Click the icon on the screen to experience the corresponding alarm.

48 49

50 51

NandFlash\

SDMMC\

Function & OperationFunction & Operation

DataManager

This function is to add the type of warning and the coordinate manually

to perfect the warning data. It is a convenient and user-friendly function.

The screen is shown as follows:

Redlight

Fixation

Detect

Radar

40Km/h

Limit

Latitude

Longitude

Add Reset

If you find the traffic monitoring facilities that the device does not contain

when you are driving, you can add them to the database manually.

Operations: First, the device should be in the place of monitoring facility,

set the warning system to the above interface, and choose a type of

warning; then, click “Add” to add it to the database. The warning system

will give you an alarm next time you pass by this place.

Language Backlight Power Sound

Time System Pentix

System Setting

This is for system setting to change default setting of the system to

your personal preference.

Operation:

On system main menu, click icon to enter into system setting.

Screen display is shown as the illustration below:

In system setting, there 9 items for setting, click directly each item to

change setting for it. Details will be described one by one below.

Language Setting

This is for setting of system language, screen display is shown as the

illustration below:

System Set

Language

Click the icons of the

corresponding language

in this interface or

choose the interface

project, the system will

save the setup

automatically when the

setup is closed, and return to the previous menu. (The system will be

required to restart after the interface project is changed.)

Backlight setting

This is for changing backlight brightness of the device screen display,

and time to start screen saver when no operation on the device.

Screen display is shown as the illustration below:

Then, drag the slide block to set. Select No Screen Saver, then the screen

saver will be disabled. After setting, close the current window to save.

Power Management

This is for setting auto power off and/or power saving mode, and time to

start power off and/or power saving when no operation on the device.

In drag menu to select time, select “No” for disabling this feature. After

setting, close the current window to save.

Backlight

Power

Brightness:

Screen Time:

0Min10Second

Current Power:

Auto Sleep sleep automatically

Sound Setting

Sound

Screen Sound

V lume Soundo

Sound 01

Sound 02

Sound 03

cus tomi ze Sound

No Sound

lick “Screen sound” in

this interface to enable

or disable the sound of

screen operations,

“Open TTS” is to enable

the speech broadcasting

function. TTS speech

engine gives a clear

broadcasting of the

function name every

time you enter into a

function. English and Chinese speeches are supported for the moment.

You can listen to the sound by clicking the start-up sound directly; and

the general volume can be adjusted by dragging the slide directly.

Open TTS

The current customize music is :

Project 1 Project 2

This function is for setting start-up music, clicking volume and the whole

volume. After entering the screen shows like below:

User-defined start-up music

In the present interface, click " then its dialog window

will show up, illustrated as below:

customize Sound"

"Nand Flash" is the inside memory of the device, "SDMMC" is the SD card.

So the start-up music can be selected from both of them. Select one,click

the button to confirm, then back to the upper-level interface.

52 53

54 55

GPSPath

comset\

DICT\

EBOOK\

GPS\

MP3\

MP4\

PICTURE\

Function & OperationFunction & Operation

Time Setting

This is for setting time of the system. After entering into this UI, screen

display is shown as the illustration below:

On this UI, click button on the screen to set. After setting, close the

current window to save.

Time

Year Mon Day

Hour Min Second

64MB

31MB

System Resources

This is for checking system resources:

On this UI, click directly at the item on the right to check.

System

Information List

Total SDRAM

Usable SDRAM

Details

SDRAM

Store MemVersion

Coordinates Calibration

This is for calibrating the stylus coordinates on touch screen. After

entering into this UI, screen display is shown as the illustration below:

On this UI, use stylus to tap at the center of the cross, then tap on

other crosses which will move after each tapping until finish and

“Touch Screen Calibration Completed” is shown.

Please point the image’s center area correctly

Refre sh

Start

If there is no logo file in the current SD card, please copy the logo file

into it or change another SD card having upgrade file, then click

button, you may see this upgrade file. During upgrade operation, click

button, then a dialogue frame will pop up, shown as the

illustration below:

Are you sure to

upgrade?

Then click

button to cancel upgrade, or click 

to proceed

with the upgrade processing. WINCE_GPS.exe

WINCE_GPS.exe

Select GPS Software

If there are two or more maps from different companies on an SD card,

then this feature can help you select each of them easily.

The way to Select: In SD card directory, open the file folder to find the

map to be used, select navigation software of .exe.

The selected pate of navigation at present is:

Are you sure to change the path into this path?

Note: The extension of the GPS file must be “.exe”.

OK Cancel

(which has different names from each different company, please refer

to details from each company of these navigation software. e.g.

Careland has WINCE_GPS.exe), then select and click button, a

dialogue frame will pop up on screen, as it shown below:

WINCE_GPS.exe

The selected path of navigation at present is:

Then click "Cancel" button to abort; click "Cornfirm" to accept, then

display on screen will be:

Click button on the upper right corner to return to GPS path UI.

Back

GPSpath

Flash

Open GPS record

Update Logo

The function is for updating start-up logo of the device. Please be sure

that you have stored the Logo pictures into the SD card. After entering

into this UI you will see the interface shown below :

Using this function is to set GPS path for your navigation. Screen display

will show as follows:

Files listed on the present screen belong to the saved ones in SD card,

so click them can read the file.

Warning: please be sure that the battery is being full when

you are updating. If not, please get the device

charged.

56 57

58 59

Qxios Hibernate 1.40 OK

i30848 ݙᄬぎ䯈 䞞ᬒࠡ

31032 ݙᄬぎ䯈 䞞ᬒৢ

184 KB Ꮖ䞞ᬒ

Function & OperationFunction & Operation

Returning to Win CE Desktop

The device can return to the Win CE by pressing one key and implement

the PDA functions.

Operation Procedure:

On the system main interface, click the icon and the screen pops

up the confirmation dialog box. Click OK to return to the Win CE

desktop. At this time, you can perform relevant operations.

Return to the navigation system from the Win CE desktop:

On the Win CE desktop, click the icon to start the navigation

system.

Car-backing Rear View Function

This function is a fully automatic function. No manual operation is needed.

Equipment Installation:

The receiving device of car-backing rear view is installed on the seat of

the navigator. In that regard, before the use of the device, it should be

installed on the vehicle mount bracket. The rear view camera should be

installed in the professional vehicle refit shop.

This function needs the navigator as monitor. In that regard, when the

car-backing rear view function is enabled, do not turn off the navigator.

Once the vehicle is engaged in the backing gear, the navigator receives

the signals, and automatically switches to the display image of the rear

view camera. When the vehicle is not engaged in the backing gear, the

navigator will switch to the previous work mode automatically.

Video Input Function

The device supports the video input function. The video signals outputted

by another device are transmitted to the device through a video cable. The

device can work as monitor. Without any operation, the device will detect

automatically the input of the vide signals, and will automatically switch

the current function to the video display state. After the connecting cable

is disconnected, the system will return automatically to the previous work

mode.

ServicesServices

Operation procedure may interfere files in SD card , causing irrationality,

due to long operation of the device, and the whole efficiency is likely to be

influenced. In that case , we can apply the function“ Allocating files in SD

card ’’ to optimize configuration of files in SD card, in order to enhance the

whole running efficiency .

Operation:

In the main system interface, click the button up on the screen, then

it will automatically show the window of allocating files in SD card, and the

result of the optimization will show as follows:

GPS CMMB Video Music Bluetooth

Flash

At this moment, click button "OK" to close the present window.

USB

ACTIVESYNC

This is to set the mode when the USB interface of the device is connected

to the computer, in which “U disk” is to set the device as the portable

memory, and “ACTIVESYNC” is to use the device for program debug.

Pictures are shown as below:

Click the desired connection mode and close the window to save the

chosen mode.

MASS STORAGE

On system main menu, click icon to enter into Game.

Screen display is shown as the illustration below:

Game

Inthisstate

clickthegameicononthescreentoenterthegame

Fordetailsonhowtoplaythegame

seethehelpinformationthat

willbeavailableafteryouenterthegame

Game

Minegame CHChess DouDiZhu

Gobang

AV-IN Set

Effect of video

Normal

Horizontal mirror

Vertical mirror

Rotate in 180

PocketLian

Mah-johng Military Chess Jump Chess

AV-IN (Need to be equipped with camera)

You can adjust the direction of the image displayed in the camera under

AV-IN, it will illustrate as follows:

Under this interface you can select the items below the Effect of video

directly, and then click it to exit the function.

Allocating files in SD card

60 61

How to save and allocate files in SD card:

Usually, the files used by the device are saved in the appointed folders

to ensure the access for embedded program of the device. You may

save files into other folders or under root directory of the SD card. If the

files are saved in the appointed folders, when opening the

corresponding application, these files can be seen directly; If not in the

folders, then you can not see them for the application, so that you need

to click “Search” button, the system will search in all files in

un-appointed folders until find it and display the result of search. For

the sake of convenience, it is strongly suggested to save the files into

the corresponding folders. The function and application of folders in

SD card is listed below:

eBook File

Navigation File

Music File

Video File

Photo File

Attention: Navigation software must be saved into GPS

directory!

Services

Services Services

Specifications

CPU

Memory

Chip

Antenna

Memory Card

Screen Type

Screen Size

Screen Color

Dot Matrix Display

Extension Slot

Battery Type

Battery Capacity

SiRF$

tlas,9

* %* %* %

GRF3i

Built-in folded antenna

Applicable for a Maximum up to 8GBSD card

TFT Touch Screen

4.3"/4.8"/5.0"

65K colors

480*272

Removeable Li-ploymer batter

950mAh

Trouble Shooter

No. Fault Possible Cause Solutions

No power on

Dead Unit

Error in upgrade

Impossible to

recharge

Battery drained (The screen

has no further display after a

blink when pressing power on

button.)

The start interface stays on

the screen for long time

without changing.

No display of the screen, or

display on screen is frozen as

any button is pressed.

Dead or frozen during

upgrade, display on the

screen is frozen and no

button works.

During charging, the green

LED indicator of the device

has no light or no charging

sign displayed on the screen.

Please refer to the description of battery

charging in this manual, only use the

enclosed charger to charge the device.

Take out the battery, then put it back, start

the device again.

Press and hold the power on button for 5

seconds, then release it to power on.

This fault can only be fixed by the

manufacturer. Please return for repair.

If the charger is connected properly and

powered.

Charger is damaged.

Battery is damaged or full charged.

It is normal when the green LED is lit on but

the charging sign is not on the screen at the

same time during charging.

Take out the battery, then put it back, start

the device again.

APICAL TECHNOLOGY A4301 GPS Portable Navigation with FM Transmitter User Manual

APICAL TECHNOLOGY (HK) CO., LTD. GPS Portable Navigation with FM Transmitter

User Manual

Navigation menu

Namespaces

Views

Navigation