AQUATIC AV AQPAVRFMPIR Water/Dust Proof MP3 / iPodTM Digital Media LockerTM User Manual IB STI IDK2 15 080702

AQUATIC AV Water/Dust Proof MP3 / iPodTM Digital Media LockerTM IB STI IDK2 15 080702

User Manual

Model AQ-DM-2RTM TMWater/Dust Proof MP3/iPod Digital Media Locker With Floating RF LCD Wireless Remote ControlINSTRUCTION MANUAL Please read this Instruction Manual before installation and operationMODEL: AQ-DM-1RFILE NAME: IB-STI-IDK2-14, 080517.cdrMHzEXTTMiPod + MP3 iPod classic80G, 160GiPod nano 3G4G, 8GiPod touch8G, 16GiPod 5G30G, 60G, 80GTMTMTMTMTMAQ-DM-1RAQ-RFDM-1Keep DryR
13456789110TM TMMP3/iPod Water/Dust Proof Digital Media LockerLOCATION OF CONTROLS2AQ-DM-1RKeep Dry12345678910Digital Media Locker Knob and Protective DoorON/Off Power ButtonWater/Dust Protection Inner Gasket3.5mm Aux Input Jack for MP3 DevicesWater Retarding and Drainage Groove ON/Off Power LEDTMSecurity Strap for Digital Media Devices (MP3/iPod )TMiPod Connector TM iPod Cradle (totally 5 iPod Cradle adaptors) Part DescriptionAuxillary Locker KnobsTM
INSTALLATIONCable ConnectionCONTENTS:Please make sure the following items are included. TMa) AQ-DM-1R Digital Media Lockerb) Water/Dust Proof RF Wireless Remote Controlc) Six (6) Finishing Covers for Stainless Mounting ScrewsTMd) Five (5) iPod Cradlese) One (1) CR-2032 batteries 3GETTING STARTED12 pin Harness CableRCA Output JackFM RadioAntennaLeft AudioRight AudioFM Radio: The AQ-DM-1R has U.S. and Euro FM Frequency capability. In both applications, make sure the FM Antenna is fully extended at the highest possible level (Height) for best performance. 2. Plug and Play Connector: The AQ-DM-1R incorporates a 12 pin "plug and play" connector harness. Owner product application options may require an "optional" connector option. Contact your dealer for details. 1. 3. RCA Inputs: The AQ-DM-1R was developed with flexibility to use RCA based Audio Media. The AQ-DM-1R has 1 set of RCA Audio Auxiliary Inputs so you can connect other RCA based devices. For non-OEM use, wiring harness must be ordered separatelyPart number AQ-UNH-1 or AQ-UNH-2AQ-DM-1RKeep Dry
ABABCRemote Control LCD Remote Control ButtonsBattery Door.Part DescriptionC2RF LCD Wireless Remote ControlLOCATION OF CONTROLSTMif your music player is not an IPod,You will only be able to use the volume and power control on the remote MHzEXTMusic Mode FM Radio ModePress once: Change from Operation mode to Standby mode.Press and hold: Change from Standby mode to Operation mode.Press once: Volume DOWN 3 decibelsPress and hold: Fast volume down Press once: Volume UP 3 decibelsPress and hold: Fast volume upPress once: Toggle external powerPress and hold: No changePress once: Change to FM Radio ModePress and hold: No change Press once: No change to Ipod/ MP3Press and hold: No change to Ipod/ MP3Press once: No change to memoryPress and hold: No change to memoryPress once: No change to memoryPress and hold: No change to memoryPress once: No change to memoryPress and hold: No change to memoryPress once: Last trackPress and hold: Fast RewindPress once: Toggle Play/PauseTMPress and hold: Turn iPod OFF Press once: Next trackPress and hold: Fast ForwardPress once: No change Press and hold: No changePress once: Toggle to ipod/ Music ModePress and hold: No changePress once: Decrease Memory Location Press and hold: No changePress once: Toggle to Memory ModePress and hold: No changePress once: Increase Memory Location Press and hold: No changePress once: -50kHzPress and hold: Scan backward Press once: MutePress and hold: No changePress once: +50kHzPress and hold: Scan forward Press once: Volume DOWN 3 decibelsPress and hold: Fast volume down Press once: Volume UP 3 decibelsPress and hold: Fast volume upPress once: Toggle external powerPress and hold: No changeButtonsPower12V triggerVolume upVolumedownFM RadioMemory +MemoryMemory -MusicFastRewindPause/PlayFastForward ControlAQ-RFDM-1In order to prolong remote battery life the LCD will shut off in 10 seconds if noother button is pressed. To turn remote back on press power once and then press the command desired. OpenCloseII
5Remove the Water/Dust Proof RF Wireless Remote control from the Digital TMMedia Locker . Unscrew the waterproof cap on the back of the remote control , place the CR-2032 in the RF Remote control and replace the waterproof cap. Always activate the on-off button when operating the Digital Media TMLocker . By doing so, your battery life will be extended. The remote control LCD will display " - -" whenever it is turned ON. TMThis display will remain until Radio mode or iPod mode is selected. The LCD will also display " - -" if it is out of its 20ft range. This remote control use state-of-art technology and will inform you if thedock is receiving the command from the remote control. In any case, if the LCD display "- -" again in either mode, this means that your remote control is out of range of reception. Please try the feature again. Important Notes on the Use of Remote ControlGETTING STARTEDPower ON ButtonTMTo activate the Digital Media Locker , press the on/off button. On will be indicated by a RED LED.TMFor applications where normal Digital Media Locker operation requires an independent 12V battery (Boat, RV), power down the AQ-DM-1R via the RF remote control. This will insure against independent battery drain. Other applications using 12V power converters are compatible with the AQ-DM-1R. RF Wireless Remote Control Synchronizing If you loose your remote control and buy another new remote control, please follow the above to start pairing before normal usage. Always ensure to connect and disconnect your media playerwith dry hands. MHzEXTTMEach Digital Media Locker comes with a matching RF Wireless LCD Remote control to maximize wireless performance. For all newly purchased remote controls, you will need to activate/Synchroize those remote controls to the AQ-DM-1R by following the steps below: a. Press and hold the button (Memory) on the remote control and then press the Power button simultaneously for 2 seconds. The LCD will display "Pair". TMb. Turn on the Digital Media Locker by pressing the power button on the AQ-DM-1R within 10 seconds after the remote is paired. (A Red LED light will turn on under the power button to indicate the unit is turned on.)c. Once synchronizing is complete, the LCD will return to the original screen setting. MHzEXT
Once the mounting hole is complete, make sure the outside surface is clear of debris. The AQ-DM-1R has an external water/dust proof gasket, but it needs a clean surface for best performance. 2. Mounting templates are included. Aquatic Av recommends to utilize the "measure twice, cut once" Method. 1. Review all outside surfaces of the AQ-DM-1R to insure proper water/dust seal. This is important for the long term environmental protection performance for iPod or MP3 devices. 4. The AQ-DM-1R has six (6) front loading mounting points with "smart locking" Media Locker clamps. Each will deploy as you begin the installation. During final mounting, apply equal pressure to all points for best water/dust outer seal performance. 3. After the installation is complete, install the finishing covers over thestainless screws with silicone. We recommend a marine grade silicone as an adhesive.5. Mounting the UnitExternal Trigger +12VDC (7)DC Ground (10)LR-(2) +12VDC(1)LR+(3)LF-(5)LF+(6)RF-(8)RF+(9)Not connected (4)RR-(11)RR+(12)FUS E BOXLeft Rear Speaker+-Left Front Speaker+-+-+-Right Front SpeakerRight Rear SpeakerPlease put a fuse into the box4(Red color)(Blue color)(Green/Black color)(Green color)(White/Black color)(White color)(Gray/Black color)(Gray color)(Purple color)(Purple/Black color)(Black color)12 Pin Harness Cable ConnectionGETTING STARTEDAquatic AV recommends the use of a optional "plug and play" connector for bestperforma nce (AQ-UNH-1). This connector is not included. For detailed information, please call the re-seller. If you choose not to use the "plug and play" option, you can use the wiring schema tic below. All open wire connections should be soldered, and protected against Water/Dust for best long term performance. 8 ohm8 ohm8 ohm8 ohmMust use 8 ohm speaker or damage may occur to the AQ-DM-1R(Yellow color)AQ-DM-1RKeep Dry
6TMPower up the Digital Media Locker .TMSecure the iPod device with the anchor straps provided. 1. 4. Press and hold (POWER) on the remote control to turn it ON. The LCD will show "--" as shown on the right. 6. TM TMAttach your iPod device to the iPod 30 pin connector. 3. Press (MUSIC) on the remote control to change to Music Mode. Use below buttons for the features. 7. SOURCELast TrackPress onceButton Press and HoldFast RewindToggle Play and PauseTMTurn iPod Sleep Next TrackFast ForwardingListening to MP3Adjusting Volume LevelPress (VOLUME UP) once to increase the volume by 3 decibels. 1. Press (VOLUME DOWN) once to reduce the volume by 3 decibels. 2. TMPress and hold either UP or DOWN and the Digital Media Locker will increase or decrease audio volume continuously. 3. TMListening to iPod :LISTENING TO PLAYERSTM TMIf you are listening iPod and you change your mode to Radio or standby mode, the iPod will automatically turned OFF. The Charging screen will appear. TMSecure the digital media locker water/dust protective door. 5. TM1. Power up the Digital Media Locker . 2. Attach the MP3 device to the 3.5mm connector. 3. Secure the MP3 with anchor straps provided. TM4. Secure the Digital Media Locker water/dust protective door. 5. RF Wireless remote Control of Volume only. 2. Take Plastic cover off 30 pin connector and replace when not in use. .MHzEXTMHzEXT
7M+M+ M-M-Saving Radio Channel to MemoryPress (MEMORY) once to toggle to memory mode. MEMMEMPress (MEMORY +) or (MEMORY-) to change the location of memory. 1. Press and hold (MEMORY) to save the previous shown frequency to the location. 2. MEMMEMPress (MEMORY) once to toggle to manual mode. 3. MEMMEMIf you want to save ths current frequency into memory. MHz4. Press (FM RADIO) on remote control to change to FM radio mode. If this is the first time you listento FM radio, the frequency will be 88.1MHz as a defualt as shown on the remote LCD. 1. FMFMMHzEXTPress (FAST REWIND) or (FAST FORWARD) change channel in increments of 50kHz. 1. M+M+ M-M-MHzListening Saved Radio MemoryPress (MEMORY) once to toggle to memory mode. 1. MEMMEMPress (MEMORY+) or (MEMORY-) to change the location of memory. 2. Press (MEMORY) once to toggle to manual mode. 3. MEMMEMMHzMHzPress and hold either (FAST REWIND) or (FAST FORWARD) will scan forward or back for the next station. A "Scan" will appear on the LCD. 2. Radio ModeLISTENING TO FM RADIOFM radio is only available when you are in the FM Radio Mode. MHzMHzMHzMHzFM radio is only available when you are in the FM Radio Mode. FM radio is only available when you are in the FM Radio Mode. To Enter FM Radio Mode: To Scan or Navigate Channels:
TMiPod ChargingTMWhen specified iPod devices are connected to the AQ-DM-1R 30 pin TMconnector, iPod battery will charge. 8Amplifier Sleep ModeTMThe Digital Media Locker's power amplifier will automatically go into "Sleep"mode in about 5 minutes of no audio sensing. For applications with the 12Vindependent battery operation, this will extend the battery life. Maximumpower drain during "Sleep Mode" is 10mA. In any operational mode, press the lightning bolt (12VTRIGGER) key to activate. Press again to deactivate. We strongly recommend you to speak with our tech service staff or your dealer if you're are considering to activate this feature. 2. External Trigger1. MHzEXTOTHER FEATURESAquatic AV understands the need for more flexible remote applications. With the Digital Media Locker, Aquatic AV has provided an independent 12V "accessory" trigger, activated by the RF Wireless Remote that provides userto activate non-iPod, MP3 related devices. This could include any 12V based devices like 12V lights or surveillance camera. Remote Control LCD Auto OFF To maximize battery life of the RF Wireless Remote Control, the LCD of the RF Wireless Control remote will be OFF if no key is pressed in 10 seconds. Tore-activate the LCD display, press (POWER) once to bring the remote control to normal operation. Load on External Trigger should not exceed 300mA.
9TMiPod CradlesTMiPod Cradles and Replacing iPod 30pin ConnectorsTMThere are 5 cradles included for docking below iPods : TMiPod classic 80GB;TMiPod 5G 30GBTMiPod classic 160GB;TMiPod 5G 60GB, 80GBTMiPod touch 8GB, 16GBTMiPod nano 3G, 4GB, 8GBTMiPod 30 pin Connector Replacement122345512354iPhoneTMUnder harsh operation conditions, the iPod 30pin Connector may deteriorate. TMTo ensure best performance, you can buy a new iPod 30pin Connector for replacing the deteriorated 30pin connector. TMInspect the 30pin iPod connector for deterioration, water, rust, or damaged terminals before each use frequently to avoid operational problems or TMdamage to the iPod . Check the connector each time before inserting the TMiPod . Always Replace the 30 pin connector cover after every use. TMOrder iPod connectors(408) 559-1668 or alocal dealerFollow below steps to change for the 30pin connector. 1. Pull out the cradle. 2. Unscrew the two (2) mounting screws. TM3. Pull out the iPod 30pin connector. 4. Replace the new one. 5. Replace the cradle. Keep DryKeep DryKeep Dry Keep DryKeep Dry
Technical SpecificationPower Supply Digital Amplifier OutputFM Radio Sensitivity FM antenna Remote Control Frequency Remote Control Battery External Trigger 12V 5A min. 50W rms per channel at 4Ohm Speaker8uVPigtail antenna2.4GHz 3.0V (1 pc CR3123) 12.0V, 300mA max.:::::::TMiPo d is a trademark of Ap ple Computer, Inc., registered in the U.S. and other countries. SPECIFICATIONAuto Amplifier Standby Mode 5 minutes +/- 10 seconds:Current drain when OFF <1mA:Current drain in Standby Mode <10mA:FM RadioDigital AmplifierGeneralDistortion <0.1% THD at 1kHz:Frequency Response 20Hz - 20kHz:FM Radio Reception Stereo:Number of Preset 6:IP Rating IP66:UV 500 hours of UV without degradation:Remote Water/Dust Rating IP66:
10FCC STATEMENT10This device complies with Part 15 of the FCC Rules. Operation is subjectto the following two conditions: (1) this device may not cause harmfulinterference, and (2) this device must accept any interference received,including interference that may cause undesired operation.NOTE:This equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to Part 15 of the FCC Rules. These limitsare designed to provide reasonable protection against harmfulinterference in a residential installation. This equipment generates, usesand can radiate radio frequency energy and, if not installed and used inaccordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will notoccur in a particular installation.If this equipment does cause harmful interference to radio or televisionreception, which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more ofthe following measures:-- Reorient or relocate the receiving antenna.-- Increase the separation between the equipment and receiver.-- Connect the equipment into an outlet on a circuit different from that towhich the receiver is connected.-- Consult the dealer or an experienced radio/TV technician for help.The manufacturer is not responsible for any radio or TV interferencecaused by unauthorized modifications to this equipment. Suchmodifications could void the user authority to operate the equipment.FCC ID: WBQAQPAVRFMPIPMADE IN CHINA

Navigation menu