AQUATIC AV AQRFDM4R Water/Dust Proof MP3/iPod Digital Media Locker with Floating RF LCD 2-way Remote Control User Manual Instruction manual DM 4U 103012A

AQUATIC AV Water/Dust Proof MP3/iPod Digital Media Locker with Floating RF LCD 2-way Remote Control Instruction manual DM 4U 103012A

user manual

Model AQ-DM-4UBTTM TMWater/Dust Proof MP3/iPod Digital Media Locker With Floating RF LCD Wireless Remote ControlINSTRUCTION MANUAL Please read this Instruction Manual before installation and operationMODEL: AQ-DM-4UBTFILE NAME: IB-DM-4UBT_manual_103012TMiPod + MP3 TMRAQ-DM-4MODEAUDIO123
1TM TMMP3/iPod Water/Dust Proof Digital Media LockerLOCATION OF CONTROLS1234567Digital Media Locker Knob and Protective DoorPart DescriptionON/Off Power ButtonWater/Dust Protection Inner Gasket3.5mm Aux Input Jack for DevicesAudio playerON/Off Power LEDTMSecurity Strap for Digital Media Devices (MP3/iPod )TMUSB Connector (for music Play back only, cannot be connected with PC and palm function devices) 2346715MODEL: AQ-DM-4UBTFILE NAME: IB-DM-4UBT_manual_103012
INSTALLATIONCable Connection2GETTING STARTEDFM Radio: make sure the FM Antenna is fully extended at the highest possible level (Height) for best performance. 2. Plug and Play Connector: The AQ-DM-4UBT incorporates a 12 pin "plug and play" connector harness. Owner product application options may require an "optional" connector option. Contact your dealer for details. 1. 3. Aux Inputs: The AQ-DM-4UBT has a 3.5mm jack Audio Auxiliary Inputs so you can connect other RCA based devices. CONTENTS:Please make sure the following items are included. TMa) AQ-DM-4UBT Digital Media Lockerb) Water/Dust Proof RF Wireless Remote Controlc) Six (6) Stainless Steel Wood Screwsd) One (1) CR-2430 Batterye) Mounting template12 pin Harness CableRCA Output JackFM RadioAntenna jackLeft AudioRight AudioFor non-OEM use, wiring harness must be ordered separatelyPart number AQ-UNH-1 or AQ-UNH-2AQ-DM-3External 12V Trigger (Brown)MODEL: AQ-DM-4UBTFILE NAME: IB-DM-4UBT_manual_103012
External Trigger +12VDC (7)DC Ground (10)LR-(2) +12VDC(1)LR+(3)LF-(5)LF+(6)RF-(8)RF+(9)Not connected (4)RR-(11)RR+(12)FUSE BOXLeft Rear Speaker+-Left Front Speaker+-+-+-Right Front SpeakerRight Rear SpeakerPlease put a fuse into the box3(Red color)(Blue color)(Green/strip)(Green color)(White/strip)(White color)(Gray/strip)(Gray color)(Purple color)(Purple/strip)(Black color)12 Pin Harness Cable ConnectionGETTING STARTEDAquatic AV recommends the use of a optional "plug and play" connector for bestperformance (AQ-UNH-1). This connector is not included. For detailed information, please call the re-seller. If you choose not to use the "plug and play" option, you can use the wiring schematic below. All open wire connections should be soldered, and protected against Water/Dust for best long term performance. 4 ohm4 ohm4 ohm4 ohmMust use 4 ohm load or damage may occur to the AQ-DM-2Bx(Yellow color)Once the mounting hole is complete, make sure the outside surface is clear of debris. The AQ-DM-4 has an external water/dust proof UBTgasket, but it needs a clean surface for best performance. 2. Mounting templates are included. Aquatic AV recommends to utilize the "measure twice, cut once" Method. 1. Review all outside surfaces of the AQ-DM-4UBT to insure proper water/dust Useal. This is important for the long term environmental protection performance for iPod or MP3 devices. 4. The AQ-DM-4 has Six (6) front screwsUBTDrive the pcs of screws with a screw driver. 6During final mounting, apply equal pressure to all points for best water/dust outer seal performance. 3. Mounting the UnitMake sure the polarity of speakersare connected correctly. AQ-DM-4MODEL: AQ-DM-4UBTFILE NAME: IB-DM-4UBT_manual_103012
4Remove the Water/Dust Proof RF Wireless Remote control from the Digital Media TM Locker . place the Unscrew the waterproof cap on the back of the remote control. CR-2430 battery in the RF Remote control and replace the water/dust proof cap. The remote control uses state-of-the-art technology and will inform you if the dock isreceiving the command from the remote control. In any case, if the LCD display "NO LINK" this means that your Locker is off or remote control is out of reception range.GETTING STARTEDTMTo activate the Digital Media Locker , press the on/off button, standby mode will be indicated by a red LED. ON mode will be indicated by a blue LED.When the unit is in the standby position the red LED will be litIf you loose your remote control and buy another new remote control, please follow the above to start pairing before normal usage. TMEach Digital Media Locker comes with a matching RF (Radio Frequency) Wireless LCD Remote control. This remote is required use any functions on the unit.For anyadditional remote controls, you will need to activate/Synchronize those remote controlsto the S1 by following the steps above. REMOTE BATTERY INSTALLREMOTE SYNCHRONIZINGPOWER ON Press and hold MODE button on the remote. Then it will show “pair”. Keep pressing this key. Then press the power button of the locker from off(no light) to standby (red light) If the pairing is successful it will show “welcome”. LED will turn blue. If pair is not successful. Please repeat the step above. to pair with the locker.MODEL: AQ-DM-4UBTFILE NAME: IB-DM-4UBT_manual_103012
DIR- REPEAT DIR+ RANDOMABABCRemote Control LCD Remote Control ButtonsBattery Door.ltem DescriptionC5LOCATION OF CONTROLSMusic Mode FM Radio ModePress once: toggle from Operation mode to Standby mode or vise versa.Press once: Volume DOWN a valuePress and hold: Fast volume down Press once: Volume UP a valuePress and hold: Fast volume upPress once: random function Press once: function.No Press and hold: Toggle external power Press and hold: Toggle external powerPress once: Change the source.Press and hold: PairPress once: Enter BAL- DSP-LOUD-VOLFAD-Press once: to next folder.Press and hold: to next folder.Press once: repeat function.Press and hold: repeat function.Press and hold: back to previous folder.Press once: Last trackPress and hold: Fast RewindPress once:Play/PausePress and hold: Play/Pause Press once: Next trackPress and hold: Fast ForwardPress once: Change the source. Press and hold: PairPress once: Listen to the station which in the No.2 Press once: Listen to the station which in the No.3 Press once: back to previous folder.Press once: Listen to the station which in the No.1 Press and hold: stored a station into No.1.Press and hold: stored a station into No.2.Press and hold: stored a station into No.3.Press once: seek downPress and hold: change to manual scanning Press once: toggle mutePress and hold: toggle mutePress once: seek up.Press and hold: change to manual scanning Press once: Volume DOWN a valuePress and hold: Fast volume down Press once: Volume UP a valuePress and hold: Fast volume upButtonsPower12V trigger/RandomVolume upVolumedownMode1/DIR- 12/Repeat 23/DIR+ 3AudioFastRewindPause/PlayFastForwardIf your music player is not an ipod, you will not be able to control track or recieve track In order to prolong remote battery life the LCD will shut off in 20 seconds if noother button is pressed. To turn remote back on press once and then any keypress the command desired. MODEMODEAUDIOAUDIO123+-RF LCD WIRELESS REMOTE CONTROL Press once: Enter BAS-TRE-BAL-FAD-DSPinformation-AREA-LOUD-DX-STEREO-VOL.Shut off DSP to access control of Bass and Treble controlMODEL: AQ-DM-4UBTFILE NAME: IB-DM-4UBT_manual_103012
6TMPower up the Digital Media Locker .1. Press (VOLUME UP) once to increase the volume by 3 decibels. 1. Press (VOLUME DOWN) once to reduce the volume by 3 decibels. 2. TMPress and hold either UP or DOWN and the Digital Media Locker will increase or decrease audio volume continuously. 3. LISTENING TO PLAYERSIf you are listening to iPod and you change your mode to Radio or standby mode, the iPodwill automatically pause playing and the Charging screen will appear. 3. Press(POWER) on the remote control or Power button on the locker to turn it ON. Attach your USB/iPod device to the Digital Media Locker.2. Press (Mode) on the remote control to select ipod mode. Use the USB/Press (Mode) on the remote control to select AUX mode. buttons as shown in the remote function chart.3. MODEMODE4. TM1. Power up the Digital Media Locker . 2. Attach your MP3 device to the 3.5mm connector. +-LISTENING TO USB/IPOD LISTENING TO MP3ADJUSTING VOLUME LEVELAlways ensure to connect and disconnect your media player with dry hands.MODEL: AQ-DM-4UBTFILE NAME: IB-DM-4UBT_manual_103012
7222333If you want to save the current frequency into memory. MODEPress or (FAST REWIND) (FAST REWIND) to seek another station. 1. Press key or button once to listen to the station stored in button.1. 111Press and hold either (FAST REWIND) or (FAST FORWARD) for manual tuning back or forward. 2. LISTENING TO FM RADIOBT mode.1. Pair with the BT mobile phone.Switch on your mobile phone BT device scan program to scan the BT device. You will find the ‘AQUATIC AV’ device. Select it to pair. The password is “0000”. 2. Play mobile's song.BT mode will be activated once a blue tooth device is linked. Then play the song in your mobile.The sound will come from the speaker of the unit. Press I<< / >>I button for previous/next file. Press >I for play/pause. ENTER FM RADIO MODE1. If you want to save the current frequency into memory, press and hold or or for more than 2 seconds.The station will be stored the to relevant button or orSAVING RADIO CHANNEL TO MEMORYLISTENING TO SAVED RADIO MEMORYTO SCAN OR NAVIGATE CHANNELS 1. Press (MODE) on remote control to switch to FM radio model.If this is the first time you listen to FM radio, the default frequency will be 87.5MHz, as shown on the remote LCD.FM radio is only available when you are in the FM Radio Mode.MODEL: AQ-DM-4UBTFILE NAME: IB-DM-4UBT_manual_103012
When specified iPod devices are connected to the USB connectorthe iPod battery will charge.8In any operational mode, press and hold the (12V TRIGGER) key to activate.Press again to deactivate. and hold We strongly recommend you to speak our technical service staff or your dealer if you are cons dering using this feature. 2. 1. OTHER FEATURESWe understands the need for more flexible remote applications. With the Digital Media Locker, We have provided an independent 12V"accessory" trigger, activated from the RF Wireless Remote that allows the userto activate non-iPod, MP3 related devices. This could include any 12V based devices like 12V lights or surveillance camera. To maximize battery life of the RF Wireless Remote Control, the LCD of the Control remote will be OFF if no key is pressed in 20 seconds. To re-activatethe LCD display, press any key once to bring the remote control to normal operation. Load on External Trigger should not exceed 350mA. To avoid rusting as a result of electrical potential in the connector, the battery of your iPod devices must not be totally drained. If your iPod is not charged at all then the will not charge it. Digital Media LockerEXTERNAL TRIGGERIPOD CHARGINGREMOTE CONTROL LCD AUTO OFF MODEL: AQ-DM-4UBTFILE NAME: IB-DM-4UBT_manual_103012
Power Supply FM Radio Sensitivity FM Antenna Remote Control Frequency Remote Control Battery External Trigger10.7V-14.4V DC, A min. 58uVDipole Antenna (not included)2.4GHz 3V (1 x Cr2430 battery) 12V DV, 350mA max.::::::SPECIFICATIONCurrent drain when Standby 10 mA:FM RadioGeneralFM Radio Reception Stereo:Number of Preset Radio 3:9TECHNICAL SPECIFICATIONMODEL: AQ-DM-4UBTFILE NAME: IB-DM-4UBT_manual_103012
10FCC STATEMENT10This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.NOTE:The equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-- Reorient or relocate the receiving antenna.-- Increase the separation between the equipment and receiver. -- Consult the dealer or an experienced radio/TV technician for help. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment. FCC ID: MADE IN CHINAMODEL: AQ-DM-4UBTFILE NAME: IB-DM-4UBT_manual_103012

Navigation menu