AQUATIC AV AQRFDM4R Water/Dust Proof MP3/iPod Digital Media Locker with Floating RF LCD 2-way Remote Control User Manual Instruction manual DM 4U 103012A
AQUATIC AV Water/Dust Proof MP3/iPod Digital Media Locker with Floating RF LCD 2-way Remote Control Instruction manual DM 4U 103012A
user manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1873650 |
| Application ID | kcFy6xUNvN2KIMpklU7EVg== |
| Document Description | user manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 58.47kB (730842 bits) |
| Date Submitted | 2013-01-04 00:00:00 |
| Date Available | 2013-01-04 00:00:00 |
| Creation Date | 2012-10-30 19:00:58 |
| Producing Software | Corel PDF Engine Version 15.0.0.486 |
| Document Lastmod | 2013-01-02 14:30:53 |
| Document Title | Instruction_manual_DM-4U_103012A.cdr |
| Document Creator | CorelDRAW X5 |
| Document Author: | ks |
MODEL: AQ-DM-4UBT FILE NAME: IB-DM-4UBT_manual_103012 iPod TM + MP3 TM INSTRUCTION MANUAL AUDIO MODE AQ-DM-4 Model AQ-DM-4UBT Water/Dust Proof MP3/iPod TM Digital Media Locker With Floating RF LCD Wireless Remote Control Please read this Instruction Manual before installation and operation TM MODEL: AQ-DM-4UBT FILE NAME: IB-DM-4UBT_manual_103012 LOCATION OF CONTROLS MP3/iPod TM Water/Dust Proof Digital Media Locker TM Part Description Digital Media Locker Knob and Protective Door ON/Off Power Button Water/Dust Protection Inner Gasket 3.5mm Aux Input Jack for Audio player Devices ON/Off Power LED TM Security Strap for Digital Media Devices (MP3/iPod ) TM USB Connector (for music Play back only, cannot be connected with PC and palm function devices) MODEL: AQ-DM-4UBT FILE NAME: IB-DM-4UBT_manual_103012 GETTING STARTED CONTENTS: Please make sure the following items are included. TM a) AQ-DM-4UBT Digital Media Locker b) Water/Dust Proof RF Wireless Remote Control c) Six (6) Stainless Steel Wood Screws d) One (1) CR-2430 Battery e) Mounting template INSTALLATION Cable Connection 1. Plug and Play Connector: The AQ-DM-4UBT incorporates a 12 pin "plug and play" connector harness. Owner product application options may require an "optional" connector option. Contact your dealer for details. 2. FM Radio: make sure the FM Antenna is fully extended at the highest possible level (Height) for best performance. 3. Aux Inputs: The AQ-DM-4UBT has a 3.5mm jack Audio Auxiliary Inputs so you can connect other RCA based devices. FM Radio Antenna jack 12 pin Harness Cable Left Audio Right Audio RCA Output Jack AQ-DM-3 External 12V Trigger (Brown) For non-OEM use, wiring harness must be ordered separately Part number AQ-UNH-1 or AQ-UNH-2 MODEL: AQ-DM-4UBT FILE NAME: IB-DM-4UBT_manual_103012 GETTING STARTED 12 Pin Harness Cable Connection Aquatic AV recommends the use of a optional "plug and play" connector for best performance (AQ-UNH-1). This connector is not included. For detailed information, please call the re-seller. If you choose not to use the "plug and play" option, you can use the wiring schematic below. All open wire connections should be soldered, and protected against Water/Dust for best long term performance. 4 ohm 4 ohm Please put a fuse into the box Left Rear Speaker LR-(2) (Green/strip) LR+(3) (Green color) Front Speaker - Left LF-(5) (White/strip) + LF+(6) (White color) FUSE BOX +12VDC(1) (Red color) Not connected (4) (Yellow color) External Trigger +12VDC (7) (Blue color) DC Ground (10) (Black color) Right Front Speaker 4 ohm RF-(8) (Gray/strip) RF+(9) (Gray color) Must use 4 ohm load or damage may occur to the AQ-DM-2Bx Make sure the polarity of speakers are connected correctly. Right Rear Speaker 4 ohm RR-(11) RR+(12) (Purple/strip) (Purple color) Mounting the Unit 1. Mounting templates are included. Aquatic AV recommends to utilize the "measure twice, cut once" Method. 2. Once the mounting hole is complete, make sure the outside surface is clear of debris. The AQ-DM-4UBT has an external water/dust proof gasket, but it needs a clean surface for best performance. 3. The AQ-DM-4UBT has Six (6) front screws Drive the 6 pcs of screws with a screw driver. During final mounting, apply equal pressure to all points for best water/dust outer seal performance. AQ-DM-4 4. Review all outside surfaces of the AQ-DM-4UBT to insure proper water/dust seal. This is important for the long term environmental protection performance for iPod or MP3 devices. MODEL: AQ-DM-4UBT FILE NAME: IB-DM-4UBT_manual_103012 GETTING STARTED REMOTE BATTERY INSTALL Remove the Water/Dust Proof RF Wireless Remote control from the Digital Media Locker TM . Unscrew the waterproof cap on the back of the remote control. place the CR-2430 battery in the RF Remote control and replace the water/dust proof cap. POWER ON TM To activate the Digital Media Locker , press the on/off button, standby mode will be indicated by a red LED. ON mode will be indicated by a blue LED. When the unit is in the standby position the red LED will be lit REMOTE SYNCHRONIZING Press and hold MODE button on the remote. Then it will show “pair”. Keep pressing this key. Then press the power button of the locker from off(no light) to standby (red light) to pair with the locker. If the pairing is successful it will show “welcome”. LED will turn blue. If pair is not successful. Please repeat the step above. The remote control uses state-of-the-art technology and will inform you if the dock is receiving the command from the remote control. In any case,if the LCD display "NO LINK" this means that your Locker is off or remote control is out of reception range. Each Digital Media Locker TM comes with a matching RF (Radio Frequency) Wireless LCD Remote control. This remote is required use any functions on the unit.For any additional remote controls, you will need to activate/Synchronize those remote controls to the S1 by following the steps above. If you loose your remote control and buy another new remote control, please follow the above to start pairing before normal usage. MODEL: AQ-DM-4UBT FILE NAME: IB-DM-4UBT_manual_103012 LOCATION OF CONTROLS RF LCD WIRELESS REMOTE CONTROL AUDIO MODE DIR- REPEAT DIR+ RANDOM Buttons Music Mode ltem Description Remote Control LCD Remote Control Buttons Battery Door. FM Radio Mode Power Press once: toggle from Operation mode to Standby mode or vise versa. 12V trigger /Random Press once: random function Press and hold: Toggle external power Press once: No function. Press and hold: Toggle external power Volume up Press once: Volume UP a value Press and hold: Fast volume up Press once: Volume UP a value Press and hold: Fast volume up Volume down Press once: Volume DOWN a value Press and hold: Fast volume down Press once: Volume DOWN a value Press and hold: Fast volume down Press once: Change the source. Press and hold: Pair Press once: Change the source. Press and hold: Pair Press once: Enter BAL-FAD-DSP-LOUD-VOL Press once: Enter BAS-TRE-BAL-FAD-DSP -AREA-LOUD-DX-STEREO-VOL. Mode MODE Audio AUDIO 1/DIR- Press once: back to previous folder. Press and hold: back to previous folder. Press once: Listen to the station which in the No.1 Press and hold: stored a station into No.1. 2/Repeat Press once: repeat function. Press and hold: repeat function. Press once: Listen to the station which in the No.2 Press and hold: stored a station into No.2. 3/DIR+ Press once: to next folder. Press and hold: to next folder. Press once: Listen to the station which in the No.3 Press and hold: stored a station into No.3. Fast Rewind Press once: Last track Press and hold: Fast Rewind Press once: seek down Press and hold: change to manual scanning Pause/ Play Press once:Play/Pause Press and hold:Play/Pause Press once: toggle mute Press and hold: toggle mute Fast Forward Press once: Next track Press and hold: Fast Forward Press once: seek up. Press and hold: change to manual scanning If your music player is not an ipod, you will not be able to control track or recieve track information In order to prolong remote battery life the LCD will shut off in 20 seconds if no other button is pressed. To turn remote back on press any key once and then press the command desired. Shut off DSP to access control of Bass and Treble control MODEL: AQ-DM-4UBT FILE NAME: IB-DM-4UBT_manual_103012 LISTENING TO PLAYERS LISTENING TO USB/IPOD TM 1. Power up the Digital Media Locker . 2. Attach your USB/iPod device to the Digital Media Locker. 3. Press(POWER) on the remote control or Power button on the locker to turn it ON. 4. Press MODE (Mode) on the remote control to select USB/ipod mode. Use the buttons as shown in the remote function chart. If you are listening to iPod and you change your mode to Radio or standby mode, the iPod will automatically pause playing and the Charging screen will appear. Always ensure to connect and disconnect your media player with dry hands. LISTENING TO MP3 1. Power up the Digital Media Locker TM . 2. Attach your MP3 device to the 3.5mm connector. 3. Press MODE (Mode) on the remote control to select AUX mode. ADJUSTING VOLUME LEVEL 1. Press + (VOLUME UP) once to increase the volume by 3 decibels. 2. Press (VOLUME DOWN) once to reduce the volume by 3 decibels. TM 3. Press and hold either UP or DOWN and the Digital Media Locker will increase or decrease audio volume continuously. MODEL: AQ-DM-4UBT FILE NAME: IB-DM-4UBT_manual_103012 LISTENING TO FM RADIO ENTER FM RADIO MODE 1. Press MODE (MODE) on remote control to switch to FM radio model. If this is the first time you listen to FM radio, the default frequency will be 87.5MHz, as shown on the remote LCD. FM radio is only available when you are in the FM Radio Mode. TO SCAN OR NAVIGATE CHANNELS 1. Press (FAST REWIND) or (FAST REWIND) to seek another station. 2. Press and hold either (FAST REWIND) or manual tuning back or forward. (FAST FORWARD) for SAVING RADIO CHANNEL TO MEMORY If you want to save the current frequency into memory. 1. If you want to save the current frequency into memory, press and hold 1 or 2 or 3 for more than 2 seconds.The station will be stored the to relevant button 1 or 2 or LISTENING TO SAVED RADIO MEMORY 1.Press 1 key or button once to listen to the station stored in button. BT mode. 1. Pair with the BT mobile phone. Switch on your mobile phone BT device scan program to scan the BT device. You will find the ‘AQUATIC AV’ device. Select it to pair. The password is “0000”. 2. Play mobile's song. BT mode will be activated once a blue tooth device is linked. Then play the song in your mobile.The sound will come from the speaker of the unit. Press I<< / >>I button for previous/next file. Press >I for play/pause. MODEL: AQ-DM-4UBT FILE NAME: IB-DM-4UBT_manual_103012 OTHER FEATURES EXTERNAL TRIGGER We understands the need for more flexible remote applications. With the Digital Media Locker, We have provided an independent 12V "accessory" trigger, activated from the RF Wireless Remote that allows the user to activate non-iPod, MP3 related devices. This could include any 12V based devices like 12V lights or surveillance camera. 1. In any operational mode, press and hold the (12V TRIGGER) key to activate. Press and hold again to deactivate. 2. We strongly recommend you to speak our technical service staff or your dealer if you are cons dering using this feature. Load on External Trigger should not exceed 350mA. IPOD CHARGING When specified iPod devices are connected to the USB connector the iPod battery will charge. To avoid rusting as a result of electrical potential in the connector, the battery of your iPod devices must not be totally drained. If your iPod is not charged at all then the Digital Media Locker will not charge it. REMOTE CONTROL LCD AUTO OFF To maximize battery life of the RF Wireless Remote Control, the LCD of the Control remote will be OFF if no key is pressed in 20 seconds. To re-activate the LCD display, press any key once to bring the remote control to normal operation. MODEL: AQ-DM-4UBT FILE NAME: IB-DM-4UBT_manual_103012 SPECIFICATION TECHNICAL SPECIFICATION General Power Supply Current drain when Standby Remote Control Frequency Remote Control Battery External Trigger FM Radio FM Radio Sensitivity FM Antenna FM Radio Reception Number of Radio Preset : 10.7V-14.4V DC,5A min. : 10 mA : 2.4GHz : 3V (1 x Cr2430 battery) : 12V DV, 350mA max. : 8uV : Dipole Antenna (not included) : Stereo : 3 MODEL: AQ-DM-4UBT FILE NAME: IB-DM-4UBT_manual_103012 FCC STATEMENT FCC ID: MADE IN CHINA This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Consult the dealer or an experienced radio/TV technician for help. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment. 10
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Create Date : 2012:10:30 19:00:58+08:00 Modify Date : 2013:01:02 14:30:53+08:00 Producer : Corel PDF Engine Version 15.0.0.486 Author : ks Creator : CorelDRAW X5 Title : Instruction_manual_DM-4U_103012A.cdr Page Count : 11EXIF Metadata provided by EXIF.tools