ARESON Technology BB0003 Wireless Mouse User Manual B110 02

ARESON Technology Corp. Wireless Mouse B110 02

users manual

RecevierID reset buttonLed1. Insert the batteriesa. Remove the battery compartment cover on the top case of the mouse by pressing theboth side's battery cover button.b. Fit in the batteries accordingly to the diagram indicated in the battery cabinet.c. Close the battery compartments cover properly.Wheel buttonBattery coverBattery cover buttonID reset button/MouseLow power Led /Charging LedIntroductionCongratulations on your purchase of the most innovative wireless mini mouse. With anincredible sensitivity to surface details and high tracking speed than other mice, the mousecan track reliably even on tricky polished or wood-grain surfaces. It offers even moreadvance that will make you more productive and more comfortable.A. Hardware Installation27 MHz RF (distance 1.0m)Using state-of-art technology. High tracking speed and sensitivity.One Channel/256 ID ( for 27Mhz models)Storable mini receiverPlug and Play! No need to set the channel ID.Power on/off switch2*AAA Alkaline batteries included .800 dpi.Power on/offswitchFeatures+-Move forwardA wrong battery placementmay cause batteries overheat.12Battery compartmentBattery compartment cover2 AAA batteriesPress thebattery cover button1Battery compartment coverbuckle the cover2. Connect the receivera. Turn off your PC.b. Connect the receivere to USB port on PCc. Turn on your PCThe unit offers a strong power saving management. Once the mouse accesses the sleeping mode, " to click anybutton of the mouse" is compulsory to wake it up.Power on/off:There is a Power on/off switch designed to save the batteries power while non-usage of a longer period.PC USB port
3. Establish communication between the mouse and receiver A. Auto-link mode: The mouse default has auto-link function, no need to reset ID when first time use. B. Manual mode: 1. Please reset the ID when necessary. (step 1) 2. Press the ID reset button on the receiver, and note the red LED will blink slowly. (step 2) 3. Press the ID reset button on the bottom of the mouse to set a new ID. (step 3) The red LED indicator will blink at a faster rate when an identical ID is located. (step 4) 4. Press any button of the mouse to confirm the ID matching. The red LED indicator on the receiver will blink any time the mouse sends it a signal. Mini Wireless Optical Mouse 1 2 3 4 5 ID links OK! Press ID reset button Red Led indicator blinks slowly Press ID reset button Red Led indicator blinks faster 4-2. Replace the new batteries Please replace a pair of new batteries and follow the previous instructions. (2, 3) Note The red LED on the top cover of the mouse is a low batteries power indicator. It indicates that batteries inside the mouse need to be replaced. Trouble Shooting a. Make sure you have connected the receiver correctly to the computer's USB port. b. For the best performance, we suggest you to locate the receiver with a distance from other electrical devices, such as the computer, the computer monitor or external storage drives. c. Make sure you have set the communication between the receiver and the mouse. Refer to the channel setting instruction (refer to No.3) in your manual. d. Some system devices might conflict with the mouse. Confirm the IRQ/address settings of these devices for conflicts, and change the settings as required. e. Make sure that you are not working the mouse on glossy or reflective surfaces. f. Try unplugging then reconnecting the receiver cable to your computer. Battery use reminders 1. Remove worn-out batteries from equipment immediately and dispose of promptly. 2. Keep all batteries (used or new) out of the reach of children. 3. To have the batteries with a regular check and replace new batteries if not used for a long time. 4. Never dispose of batteries in fire, as they could explode. 5. Always replace all the batteries at the same time. Mixing old and new batteries or mining types (such as alkaline with zinc carbon) will reduce overall performance and could cause leakage or rupture. 6. Do not mix different types of batteries (e.g. Ni MH, NiCd, alkaline, and etc) in the mouse. 7. Remove batteries from the electrical device if the device is not going to be used for a long time. 8. If the performance of the batteries decreases substantially, it is time to replace the batteries. FCC NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. User's Guide

Navigation menu