ARESON Technology CL0006 Wireless Mouse User Manual Manual

Download:
Mirror Download [FCC.gov]
Document ID	964552
Application ID	ld+1rpr2OqErh5ppnkxfdA==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	151.76kB (1897027 bits)
Date Submitted	2008-07-03 00:00:00
Date Available	2008-07-03 00:00:00
Creation Date	2008-01-29 17:57:50
Producing Software	Adobe PDF library 5.00
Document Lastmod	2008-07-01 16:45:38
Document Title	Manual
Document Creator	Adobe Illustrator 10.0

Introduction
A. Hardware Installation
Congratulations on your purchase of the most innovative wireless mouse. With an
incredible sensitivity to surface details and high tracking speed than other mice, the mouse
can track reliably even on tricky polished or wood-grain surfaces. It offers even more
advance that will make you more productive and more comfortable.
1. Insert the batteries
Safety Notice
This product complies with IEC 60825-1, Class I laser product.
The product complies with FCC and CE rules.
a. Press the battery cover release button on the bottom of the mouse.
b. Remove the battery compartment cover on the top case of the mouse.
c. Fit in the batteries accordingly to the diagram indicated in the battery cabinet.
d. Close the battery compartments cover properly.
e. Make sure the Power on-off swich on the bottom of the mouse is ON.
f. The Low Power LED in the wheel bar will blink 3 seconds if the mouse power is on.
Battery compartment cover
Please DO NOT direct the
laser beam at anyone's eyes.
Battery cover
release button
2 * AA batteries
A wrong battery placement
may cause batteries overheat.
Features
2.4GHz (distance 6~8m), 16 Channels/4096 ID
Using state-of-art technology. High tracking speed and sensitivity.
4-way scrolling.
Rubber side grips.
One year battery life. (*Optional for specific laser long-life models)
Auto-Link, Plug and Play! No need to set the channel ID.
Internet Forward & Backward button
Power on/off switch.
800/1600 dpi switchable button.
2*AA Alkaline batteries included.
Mouse
Wheel button
The unit offers a strong power saving management. Once the mouse accesses the sleeping mode, " to click any
button of the mouse" is compulsory to wake it up.
Power on/off:
There is a Power on/off switch designed to save the batteries power while non-usage of a longer period.
User can push DPI button to change the resolution. The low power LED will be flashed when dpi has been
sucessfully swithced.
2. Connect the receiver
a. Turn on your PC.
b. Connect the receivere to USB port on PC
Receiver
Low power indicator
Dpi button
Power on/off switch
Battery cover
ID reset button
Battery cover
release button
ID reset button / LED
PC
USB port
3. Communication : The mouse & the receiver
Note
The 2.4Ghz RF mouse features a dual-way transmission technology which enables the
mouse and the receiver auto-communication.
A. Auto-link mode
1. Make sure the Power On-Off Switch on the bottom of the mouse is ON.
2. Operate the mouse, and the LED in the receiver will blink fast. Now the mouse and the
receiver is auto-linked successfully.
B. Manual mode
If you find the communication channel does not connect well, you can use following steps
to reset a new channel ID.
ID links OK!
Press ID reset button
Red Led indicator
blinks slowly
Red Led indicator
blinks faster
Press ID reset button
Note
While the mouse is working, if encountering any interference, the mouse and the receiver will
automatically source out and transfer to another free channel. During the transferring, the
cursor movement may have a second delay.
4. Replace the new batteries
Please replace a pair of new batteries and follow the previous instructions. (2, 3)
Note
The 4-Way scrolling function is only effective under successful installation of the
original mouse driver. The driver is an optional item included in the package or it can
be downloaded from the website of your local brand vendor.
To function the 4-way scrolling in some applications in Window VISTA such as Word,
Excel, Powerpoint and etc., the driver should be installed.
B. Driver Installation
The mouse features plug & play. It is not necessary to install the driver to operate the
mouse. The driver is an optional item included. However if the model purchased is with 4Way Scrolling function, you may require the mouse software driver to make the 4-Way
scrolling function effective.
1. Un-install or removing the current mouse driver
Before installing the driver of the mouse, we suggest that you check if any other mouse
driver installed in your system. If yes, in order not to make conflict, please un-install or
remove that driver before installing the mouse.
2. Install the mouse 4-Way Scrolling driver
a.Select setup.exe to install the driver from the CD.
b.or you can download the 4-Way Scrolling driver from vendor's website.
Trouble Shooting
a. Make sure you have connected the receiver correctly to the computer's USB port.
b. For the best performance, we suggest you to locate the receiver with a distance from other electrical devices, such as the
computer, the computer monitor or external storage drives.
c. Make sure you have set the communication between the receiver and the mouse. Refer to the channel setting instruction
(refer to No. 3) in your manual.
d. Some system devices might conflict with the mouse. Confirm the IRQ/address settings of these devices for conflicts, and
change the settings as required.
e. Make sure that you are not working the mouse on glossy or reflective surfaces.
f. Try unplugging then reconnecting the receiver cable to your computer.
The red LED on the scroll wheel is a low batteries power indicator. It indicates that
batteries inside the mouse need to be replaced.
Battery use reminders
5. Operation
4-Way Scrolling:
a. Vertical Scrolling
Roll wheel up to scroll up; roll wheel down to scroll down.
b. Horizontal Scrolling
Hold the wheel to left to scroll left; hold the wheel to right to scroll
right. Release wheel to stop scrolling function.
1. Remove worn-out batteries from equipment immediately and dispose of promptly.
2. Keep all batteries (used or new) out of the reach of children.
3. To have the batteries with a regular check and replace new batteries if not used for a long time.
4. Never dispose of batteries in fire, as they could explode.
5. Always replace all the batteries at the same time. Mixing old and new batteries or mining types (such as alkaline with
zinc carbon) will reduce overall performance and could cause leakage or rupture.
6. If the lower power indicator is blinking, please change the battery immediately. Otherwise, you may need to reset ID after
replacing the battery.
7. Do not mix different types of batteries (e.g. Ni-MH, NiCd, alkaline, and etc) in the mouse.
8. Remove batteries from the electrical device if the device is not going to be used for a long time.
9. If the performance of the batteries decreases substantially, it is time to replace the batteries.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Adobe PDF library 5.00
Create Date                     : 2008:01:29 17:57:50+09:00
Modify Date                     : 2008:07:01 16:45:38+08:00
Creator Tool                    : Adobe Illustrator 10.0
Metadata Date                   : 2008:07:01 16:45:38+08:00
Format                          : application/pdf
Document ID                     : uuid:7113907f-af4e-4ba5-b960-8fb513920450
Instance ID                     : uuid:7fb8fccb-a8c9-4a9e-b2b8-1e1f744dc259
Page Count                      : 3
Creator                         : Adobe Illustrator(R) 10.0
For                             : PM, RD
Title                           : F:\»¡©ú®Ñ\L187\L187-manual01.ai
Bounding Box                    : -36 -632 878 36
Container Version               : 9
Creator Version                 : 10

EXIF Metadata provided by EXIF.tools