ARRIS 2W2701HGV 802.11 BG Access Point User Manual Gateway 2701HGV IG

Download:
Mirror Download [FCC.gov]
Document ID	787272
Application ID	tsFXOzwiRlxvlVNzdBPJZQ==
Document Description	Install Guide
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	307.25kB (3840657 bits)
Date Submitted	2007-05-01 00:00:00
Date Available	2007-05-02 00:00:00
Creation Date	2007-03-20 17:12:40
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2007-04-10 07:55:02
Document Title	Gateway_2701HGV_IG.book
Document Creator	FrameMaker 7.1
Document Author:	jrindegard

2Wire Gateway
Installation Guide
For 2701HGV
DRAFT ONLY
al
2Wire Confidenti
Contents
Contents .......................................................................................................................................... 1
Getting Started .............................................................................................................................. 1
Remove or Disable Conflicting Applications ................................................................1
Check Your Computer’s Browser and System Requirements ........................................1
Browser Requirements ........................................................................................1
System Requirements .........................................................................................1
Connect the First Computer to the Gateway ............................................................................. 2
Choose a Computer and Connection Type ..................................................................2
Install the DSL Filter .................................................................................................2
For Wall-Mounted Phones .....................................................................................3
Ethernet Connection .................................................................................................4
Check Your Connections ......................................................................................4
Wireless Connection .................................................................................................5
Non-2Wire Wireless Adapter Configuration .............................................................6
USB Connection .......................................................................................................7
Install the 2Wire Gateway USB Driver - Windows ....................................................8
Install the 2Wire Gateway USB Driver - Macintosh .................................................8
Check Your Connections ......................................................................................8
Run the 2Wire Setup Wizard ....................................................................................................... 9
Windows XP/2K/ME/98SE .....................................................................................9
Macintosh OS 10.1.4/10.1.5/10.2.0 - 10.2.8/10.3.3 - 10.3.8 .................................9
Add Computers to the Network ................................................................................................. 10
Ethernet Connection ...............................................................................................11
USB Connection .....................................................................................................12
Wireless Connection ...............................................................................................13
Appendix A: Install the Gateway on Other Operating Systems ............................................. 14
Ethernet Connection ...............................................................................................14
USB Connection .....................................................................................................15
Configuring the Internet Connection ....................................................................16
Regulatory Information ............................................................................................................... 17
DRAFT ONLY
al
2Wire Confidenti
Notice to Users
©2006 2Wire, Inc. All rights reserved. This manual in whole or in part, may not be reproduced, translated, or reduced to any machinereadable form without prior written approval.
2WIRE PROVIDES NO WARRANTY WITH REGARD TO THIS MANUAL, THE SOFTWARE, OR OTHER INFORMATION CONTAINED HEREIN AND
HEREBY EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE WITH
REGARD TO THIS MANUAL, THE SOFTWARE, OR SUCH OTHER INFORMATION, IN NO EVENT SHALL 2WIRE, INC. BE LIABLE FOR ANY
INCIDENTAL, CONSEQUENTIAL, OR SPECIAL DAMAGES, WHETHER BASED ON TORT, CONTRACT, OR OTHERWISE, ARISING OUT OF OR
IN CONNECTION WITH THIS MANUAL, THE SOFTWARE, OR OTHER INFORMATION CONTAINED HEREIN OR THE USE THEREOF.
2Wire, Inc. reserves the right to make any modification to this manual or the information contained herein at any time without notice.
The software described herein is governed by the terms of a separate user license agreement.
Updates and additions to software may require an additional charge. Subscriptions to online service providers may require a fee and
credit card information. Financial services may require prior arrangements with participating financial institutions.
2Wire, the 2Wire logo, and HomePortal are registered trademarks, and HyperG, Greenlight, FullPass, and GuestPass are trademarks
of 2Wire, Inc. All other trademarks are trademarks of their respective owners.
5100-000457-000 Rev B 03/2007
DRAFT ONLY
al
2Wire Confidenti
Getting Started
Remove or Disable Conflicting Applications
Internet sharing software and PC based firewall applications typically interfere with the 2Wire gateway, and
should be removed or disabled before you install the gateway. The 2Wire gateway provides the same
features as the products listed below.
If you have any of the following (or similar) applications installed on your computers, remove or disable
them according to the manufacturer’s instructions before proceeding.
Internet Sharing Applications
Proxy Software
Security Software
Microsoft Internet Connection Sharing
Wingate
Norton Internet Security
Intel Anypoint ISS
Sygate
Black Ice
3Com HomeClick
Zone Alarm
Check Your Computer’s Browser and System Requirements
Verify that your computers meet the following minimum requirements:
Browser Requirements
Windows: Microsoft Internet Explorer 5.5 or higher (included on the 2Wire CD), Netscape Navigator 4.7 or
higher, or Firefox 1.0 or higher.
Macintosh: Safari 1.0, Microsoft Internet Explorer 5.0, or Netscape 4.74 or higher.
System Requirements
•
5 MB of available hard disk space for 2Wire gateway software.
•
Windows XP, Windows 2000, Windows NT 4.0 with Service Pack 6, Windows ME, Windows 98/98SE,
or Mac OS 8.6 or higher.
•
Network adapter (such as Ethernet, USB, or 802.11b/g wireless).
DRAFT ONLY
al
2Wire Confidenti
Connect the First Computer to the Gateway
Congratulations on the purchase of your 2Wire gateway. To install your gateway and configure your network,
follow these steps.
Note: Features for different models may vary. Product details will be specified for each
particular model.
Choose a Computer and Connection Type
There are many ways to set up your network, but typically the first computer is located in the same room as
the gateway and your DSL connection. Ethernet is the preferred connection method for your first computer,
although instructions for connecting via wireless and USB are also provided.
The first computer you connect to the network is used to configure the 2Wire gateway for proper operation.
Choose one of the following methods to connect your first computer to the gateway. Save and close all open
programs before you begin connecting your gateway.
Connection Type
Page
Ethernet
page 4
Wireless
page 5
USB
page 7
Install the DSL Filter
Note: New DSL customers only. Existing DSL customers with filters already installed should
proceed to Ethernet Connection on page 4, Wireless Connection on page 5, or USB
Connection on page 7.
Regular telephone and Digital Subscriber Line (DSL) signals are carried over the same line. Converting your
regular telephone line to DSL can cause high-pitched tones and static when using the phone.
Installing a filter on every telephone or telephone device sharing the same telephone number as your DSL1
separates these signals and eliminates the noise.
DRAFT ONLY
al
2Wire Confidenti
1. Do not install DSL filters if your telephone line is only carrying a DSL signal.
Connect the First Computer to the Gateway
To install the DSL filter:
1.
Locate the phone jack where you want to connect your 2Wire
gateway.
2.
Insert the DSL filter into the jack.
3.
If you have a phone, answering machine, fax machine, satellite TV
equipment, or other phone device in this jack location, plug it into
the filter port labeled PHONE.
4.
Install a DSL filter on all other phone devices in your house (such as dial-up modems, fax machines,
caller ID devices, and set top boxes). Plug each of these devices into the filter port labeled PHONE.
For Wall-Mounted Phones
If you have a wall-mounted telephone, install a wall-mount DSL filter following these steps.
1.
Lift the telephone from the wall pegs and disconnect the phone cord from the wall jack.
2.
Connect the telephone cord from the back
of the DSL filter into the wall jack. Align the
keyhole slots on the filter with the wall plate
pegs and press down gently to secure.
3.
Connect the telephone cord to the phone
jack located on the front of the mounted
filter.
4.
Attach the telephone to the mounting pegs on the DSL filter and your installation is complete.
Note: The extra phone jack located at the bottom of the filter (labeled LINE) is provided
should you wish to connect your gateway at this phone connection.
DRAFT ONLY
al
2Wire Confidenti
Connect the First Computer to the Gateway
Ethernet Connection
Telephone wall jack
with DSL
Computer
AC power
POWER
RESET
PHONE LINES
DSL
2Wire
DSL filter
Gateway
Figure 1. Gateway Connected Via Ethernet
1.
Connect the provided power adapter from the gateway’s POWER port to an electrical outlet. The POWER
light on the front of the gateway should be green.
2.
Connect the provided gray phone cable from the gateway’s PHONE LINE port to the DSL filter jack labeled
DSL/HPNA.
3.
Connect the yellow Ethernet cable provided with the gateway from any available LOCAL ETHERNET port on
the gateway to your computer’s Ethernet port.
Check Your Connections
With your computer completely started, verify the POWER and ETHERNET indicator lights on the front of the
2Wire gateway are green. If they are not, see “Understanding the Indicator Lights” on page 18. The
INTERNET indicator light will not turn green until the gateway software has been installed and an Internet
connection has been established.
DRAFT ONLY
al
2Wire Confidenti
Connect the First Computer to the Gateway
Wireless Connection
Requires wireless-enabled notebook or a computer with an 802.11b/g wireless network adapter installed.
Wireless adapters can be purchased from your service provider.
Telephone wall jack
with DSL
AC power
Gateway 2701
2Wire
DSL filter
Computer
(with 802.11g wireless
adapter installed)
POWER
RESET
PHONE LINES
DSL
Figure 2. Gateway Connected Via Wireless
1.
Connect the provided AC power adapter from the 2Wire gateway’s POWER port to an electrical outlet.
The POWER light on the front of the gateway should be green.
2.
Connect the provided gray telephone cable from the gateway’s PHONE LINE port to a telephone jack with
DSL service.
3.
Install your wireless adapter according to the manufacturer’s instructions (see note below).
Note: If you use a 2Wire wireless adapter (PCI, PC card, or USB adapter) for wireless
networking, the 2Wire CD automatically configures it to communicate with the gateway
during setup. If you are NOT using a 2Wire wireless adapter, you must manually configure
your adapter to communicate with the gateway using the information on page 6.
DRAFT ONLY
al
2Wire Confidenti
Connect the First Computer to the Gateway
Non-2Wire Wireless Adapter Configuration
Locating the Serial Number and Wireless
Encryption Key
The serial number of your 2Wire gateway is used as the network name (SSID). Beneath the serial number is
a ten-digit number which is used as the encryption key. These are located on the bottom of your gateway
(shown in vertical orientation). You will need this information to configure your wireless adapter.
POWER
ETHERNET
WIRELESS
2Wire® Gateway
www.2Wire.com
SN: 145511100110
FLX
Assembly Number 4200-000428-000
PHONE 1
PHONE 2
[ 4119627022 ]
Made in Malaysia
Patent No. Des. 437,289
5,1V 3A
RG2701HGV-00
Tested To Comply With
FCC Standards
FCC ID: PGR2W2701
2701HGV
Concentrador Inalambrico
para Red (ADSL)
Marca: 2Wire
Modelo: RG2701HGV-00
Complies with Part 68, FCC Rules
FCC Reg: 66KRDL01BTW2701
REN=0.1
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired operation.
USB-PC
DSL
INTERNET
2701HGV
Configuring the Adapter
1. Install and configure your wireless adapter according to the manufacturer’s instructions.
2.
Use the network adapter configuration software or Windows network connection wizard to set the
network name (SSID) and encryption key (WEP).
a. The network name is the word “2WIRE” (in all capital letters), followed by the last three digits of the
gateway serial number (for example, 2WIRE110).
b. The encryption key is a 64-bit hex value, located beneath the bar code on the bottom of the 2Wire
gateway. In the example, it is 4119627022.
c.
For Mac OS X users, you may need to enter the “$” character at the beginning of the encryption key
(for example, $4119627022).
DRAFT ONLY
al
2Wire Confidenti
Connect the First Computer to the Gateway
USB Connection
Telephone wall jack
Computer
AC power
POWER
RESET
TELEPHONE
USB - PC
PHONE LINE
DSL filter
USB cable
Gateway 2701
Figure 3. Gateway Connected Via USB
1.
Connect the provided AC power adapter from the 2Wire gateway’s POWER port to an electrical outlet.
The POWER light on the front of the gateway should be green.
2.
Connect the provided blue USB cable from the gateway’s USB port to the USB port on your computer.
3.
Connect the provided gray telephone cable from the gateway’s PHONE LINE port to a telephone jack with
DSL service.
DRAFT ONLY
al
2Wire Confidenti
Connect the First Computer to the Gateway
Install the 2Wire Gateway USB Driver - Windows
1.
Power on your computer and place the 2Wire CD in your computer’s CD-ROM drive.
2.
If the Add Hardware Wizard displays, follow the on-screen instructions. If prompted to identify where to
search for drivers, deselect Floppy Disk drive and check CD-ROM drive.
3.
After the driver installs click Finish to complete the driver installation. The Setup Wizard will resume
when your PC has rebooted.
Note: Microsoft Windows 98 users may be prompted to insert the Windows 98 installation
CD-ROM after installing the 2Wire gateway USB drivers. After the Windows 98 updates are
complete, remove the Windows 98 CD and reinsert the 2Wire CD into your CD-ROM prior to
rebooting your PC.
Install the 2Wire Gateway USB Driver - Macintosh
Note: The 2Wire gateway supports USB for Macintosh OS 8.6, 9.2, 10.1.4, 10.1.5, 10.2.0,
10.2.1 to 10.2.6, 10.3.3 to 10.3.9, 10.4.0, and 10.4.1.
Before making your USB connection to the gateway, you must install the 2Wire gateway USB driver on your
computer. The following instructions are for USB installation on Macintosh computers running OS 10.2.
1.
Power on your computer and place the 2Wire CD in your computer’s CD-ROM drive.
2.
Double-click the 2Wire CD icon on your desktop.
3.
Double-click 2Wire USB to begin the driver installation.
4.
If you have set up an administrator name and password, the Authenticate screen opens. Enter your
administrator name and password and click OK.
5.
Follow the on-screen instructions. When the driver installation is complete, you will be prompted to
restart your computer.
6.
After your computer restarts, connect the provided blue USB cable from the USB-PC port on the 2Wire
gateway to your computer’s USB port.
Check Your Connections
With your computer completely started, verify the POWER and USB-PC indicator lights on the front of the
2Wire gateway are green. If they are not, see “Understanding the Indicator Lights” on page 18. The
INTERNET indicator light will not turn green until the gateway software has been installed and an Internet
connection has been established.
DRAFT ONLY
al
2Wire Confidenti
Run the 2Wire Setup Wizard
Windows XP/2K/ME/98SE
1.
2.
Insert the 2Wire CD and follow the on-screen instructions. If the 2Wire Setup Wizard does not
automatically start:
−
Double-click the My Computer icon located on the desktop.
−
Double-click the icon that corresponds to your CD-ROM drive.
−
Double-click Setup.exe and follow the on-screen instructions.
If prompted by the Setup Wizard, enter the 20-digit key code you received from your service provider.
If you were not provided with a key code, contact your service provider.
Macintosh OS 10.1.4/10.1.5/10.2.0 - 10.2.8/10.3.3 - 10.3.8
Note: MAC OS 9.X AND OTHER OPERATING SYSTEM USERS: Users running Mac OS 9.X and
operating systems other than those stated above must perform a manual configuration of
the gateway. Refer to “Appendix A: Install the Gateway on Other Operating Systems” on
page 14 for step-by-step instructions.
1.
Insert the 2Wire CD.
2.
Double-click the 2Wire icon.
3.
Double-click the 2Wire Setup Wizard icon.
4.
If prompted by the Setup Wizard, enter the 20-digit key code you received from your service provider.
If you were not provided with a key code, contact your service provider.
DRAFT ONLY
al
2Wire Confidenti
Add Computers to the Network
After your first computer is connected to the 2Wire gateway and your Internet connection has been
established, you can connect other computers to the network.
Use any of the following methods to connect additional computers to your network.
Connection Type
Page
Ethernet
page 11
USB
page 12
Wireless
page 13
DRAFT ONLY
al
2Wire Confidenti
10
Add Computers to the Network
Ethernet Connection
Telephone wall jack
with DSL
DSL filter
AC Power
Additional computer
with Ethernet card
POWER
RESET
PHONE LINES
DSL
First computer
with Ethernet connection
Figure 4. Gateway Connected to Second Computer Via Ethernet
1.
Connect an Ethernet cable from any available LOCAL ETHERNET1 port on the gateway to your computer’s
Ethernet port.
1. The number of Ethernet ports vary by model (from one to four). If your gateway has four Ethernet ports, you
can connect up to four computers to your network via Ethernet.
DRAFT ONLY
al
2Wire Confidenti
11
Add Computers to the Network
USB Connection
Telephone wall jack
with DSL
DSL filter
AC Power
First computer
with Ethernet card
POWER
RESET
TELEPHONE
USB - PC
PHONE LINE
Additional computer
with available USB port
Figure 5. Gateway Connected to Second Computer Via USB
1.
Connect the provided blue USB cable from the gateway’s USB-PC port to the USB port on your computer.
2.
Install the USB driver (refer to page 8 for instructions).
3.
Repeat “Run the 2Wire Setup Wizard” on page 9.
DRAFT ONLY
al
2Wire Confidenti
12
Add Computers to the Network
Wireless Connection
Requires a computer with an 802.11b/g wireless network adapter installed. Wireless adapters are
purchased separately from the 2Wire gateway.
Telephone wall jack
with DSL
AC power
Gateway 2701
2Wire
DSL filter
Computer
(with 802.11g wireless
adapter installed)
POWER
RESET
PHONE LINES
DSL
Figure 6. Gateway Connected to Second Computer Via Wireless
Note: If you use a 2Wire wireless adapter (PCI, PC card, or USB adapter) for wireless
networking, the gateway installation software automatically configures it to communicate
with the gateway during setup.
If you are NOT using a 2Wire wireless adapter, you must manually configure your adapter to
communicate with the gateway using the information on page 6.
1.
Install your wireless adapter according to the manufacturer’s instructions (see note above).
2.
Repeat “Run the 2Wire Setup Wizard” on page 9.
DRAFT ONLY
al
2Wire Confidenti
13
Appendix A: Install the Gateway on Other
Operating Systems
Follow these instructions if you are using an operating system that is not supported by the 2Wire CD (such
as any Macintosh OS prior to 10.2, UNIX, or Linux).
There are many ways to set up your network, but typically the first computer is located in the same room as
the gateway and your DSL connection. Ethernet is the preferred connection method for your first computer,
although instructions for connecting via USB are also provided.
Ethernet Connection
Computer
POWER
RESET
PHONE LINES
DSL
DSL filter
Gateway 2701
Figure 7. Gateway Connected Via Ethernet (Macintosh)
1.
Install DSL phone filters according to the instructions on page 2.
2.
Connect the provided power adapter from the gateway’s POWER port to an electrical outlet.
3.
Connect the provided gray phone cable from the gateway’s PHONE LINE port to the DSL filter jack
labeled DSL/HPNA.
4.
Connect the yellow Ethernet cable provided with the gateway from a LOCAL ETHERNET port on the gateway
to your computer’s Ethernet port.
DRAFT ONLY
al
2Wire Confidenti
14
Appendix A: Install the Gateway on Other Operating Systems
5.
Proceed to “Configuring the Internet Connection” on page 16.
USB Connection
Note: Connecting your computer to the gateway using USB requires an available USB port.
Only one Windows or Macintosh computer can be directly connected to the 2Wire gateway
using the USB connection. The following instructions are for Macintosh computers running
OS 9.x.
Computer
POWER
RESET
TELEPHONE
USB - PC
PHONE LINE
DSL filter
USB cable
Gateway 2701
Figure 8. Gateway Connected Via USB (Macintosh)
1.
Install DSL phone filters according to the instructions on page 2.
2.
Insert the 2Wire CD in the computer’s CD-ROM drive.
3.
Double-click the 2Wire CD icon on your desktop.
4.
Double-click 2Wire USB to begin the driver installation.
5.
If you have set up an administrator name and password, the Authenticate screen opens. Enter your
administrator name and password and click OK.
6.
Follow the on-screen instructions. When the driver installation is complete, you will be prompted to
restart your computer.
7.
After your computer restarts, connect the provided blue USB cable from the USB-PC port on the 2Wire
gateway to your computer’s USB port.
DRAFT ONLY
al
2Wire Confidenti
15
Appendix A: Install the Gateway on Other Operating Systems
8.
Open the network Control Panel by selecting the Apple icon > Control Panel > TCP/IP.
9.
Verify that “Connect Via: 2Wire USB Remote NDIS…” is selected to set the network adapter as active.
10. Click Save to complete your installation.
11. Proceed to “Configuring the Internet Connection” on page 16.
Configuring the Internet Connection
Now that your first computer is connected to the gateway, you need to configure your gateway to
communicate with your Internet service provider.
To activate your Internet account:
1.
Open your Internet browser.
2.
Type http://gateway.2wire.net/setup into the browser’s address line.
3.
When prompted to enter a key code, enter the key code provided by your Internet service in the key
code field, and click NEXT.
4.
Select your Local Time Zone and click NEXT.
5.
You may be prompted to enter service provider information such as username and password. Enter any
required service provider information and click NEXT.
6.
The connection process will begin. During this process the INTERNET light on the front of the gateway
will first blink green then turn solid green. This step could take up to five minutes as the gateway
searches for your broadband service.
7.
The gateway will now connect to the Internet. This process may take several minutes. If the registration
screen opens, click the REGISTER button and complete the 2Wire registration process.
DRAFT ONLY
al
2Wire Confidenti
16
Regulatory Information
Declaration of Conformity
Trade Name:
2700 Series Gateway
Responsible Party:
2Wire, Inc.
Address:
1704 Automation Parkway
San Jose, CA
Telephone:
408.856.1600
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and the receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to
operate this equipment.
Only peripherals (computer input/output devices, terminals, printers, and so forth) that comply with FCC Class B limits
may be attached to this computer product.
Operation with noncompliant peripherals is likely to result in interference to radio and television reception.
WARNING: While this device is in operation, a separation distance of at least 20 cm (8 inches) must be maintained
between the radiating antenna inside the ERU and the bodies of all persons exposed to the transmitter in order to meet
the FCC RF exposure guidelines. Making changes to the antenna or the device is not permitted. Doing so may result in
the installed system exceeding RF exposure requirements. This device must not be co-located or operated in
conjunction with any other antenna or radio transmitter. Installers and end users must follow the installation
instructions provided in this guide.
FCC Part 68
This equipment complies with Part 68 of the FCC rules. On the bottom of this equipment is a label that contains,
among other information, the FCC equivalence number (REN) for this equipment. If requested, this information must be
provided to the telephone company.
The REN is used to determine the quantity of devices that may be connected to the telephone line. Excessive RENs on
the telephone line may result in the devices not ringing in response to an incoming call. In most, but not all areas, the
sum of the RENs should not exceed five. To be certain of the number of devices that may be connected to the line, as
determined by the total RENs, contact the telephone company to determine the maximum REN for the calling area.
DRAFT ONLY
al
2Wire Confidenti
17
Regulatory Information
If the terminal equipment causes harm to the telephone network, the telephone company will notify you in advance that
temporary discontinuance of service may be required. But if advance notice is not practical, the telephone company will
notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you
believe it is necessary.
The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the
operations of the equipment. If this happens, the telephone company will provide advance notice in order for you to
make the necessary modifications in order to maintain uninterrupted service.
If trouble is experienced with this equipment, please contact the store, reseller, or agent from whom the product was
purchased.
Repair of this equipment should be made only by the 2Wire Service Center or a 2Wire authorized agent.
18
DRAFT ONLY
al
2Wire Confidenti

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Page Mode                       : UseOutlines
XMP Toolkit                     : 3.1-702
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Create Date                     : 2007:03:20 17:12:40Z
Creator Tool                    : FrameMaker 7.1
Modify Date                     : 2007:04:10 07:55:02-07:00
Metadata Date                   : 2007:04:10 07:55:02-07:00
Format                          : application/pdf
Title                           : Gateway_2701HGV_IG.book
Creator                         : jrindegard
Document ID                     : uuid:d1ffe3ab-cbf7-47b1-a201-f514877ceed0
Instance ID                     : uuid:609cd090-e516-4dee-b3ff-a43eceb4386b
Page Count                      : 21
Author                          : jrindegard

EXIF Metadata provided by EXIF.tools