ARRIS WECB460 Wireless Ethernet-Coaxial Bridge User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2141550
Application ID	f2MpIRkeGatIDgaFfie5Ww==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	51.49kB (643607 bits)
Date Submitted	2013-12-13 00:00:00
Date Available	2013-12-13 00:00:00
Creation Date	2017-10-31 22:17:19
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-31 22:17:19
Document Title	Microsoft Word - ARRIS WECB guide-WEB GUI_FCC_IC-ok.docx
Document Creator	PScript5.dll Version 5.2.2
Document Author:	VeraHsu

WECB460 WEB GUI Guide
FCC Statement:
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the
following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
● Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate this
equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
For product available in the USA/Canada market, only channel 1~11 can be
operated. Selection of other channels is not possible.
This device and it's antennas(s) must not be co-located or operating in conjunction
with any other antenna or transmitter except in accordance with FCC multi-transmitter
product procedures.
This device is going to be operated in 5.15~5.25GHz frequency range, it is
restricted in indoor environment only.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be
installed and operated with minimum distance 20cm between the radiator &
your body.
IC Statement:
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may
not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil
ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout
brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
For product available in the USA/Canada market, only channel 1~11 can be
operated. Selection of other channels is not possible.
Pour les produits disponibles aux États‐Unis / Canada du marché, seul le canal 1 à 11 peuvent
être exploités. Sélection d'autres canaux n'est pas possible.
This device and it's antennas(s) must not be co-located or operating in conjunction
with any other antenna or transmitter except in accordance with IC multi-transmitter
product procedures.
Cet appareil et son antenne (s) ne doit pas être co‐localisés ou fonctionnement en association
avec une autre antenne ou transmetteur.
The device for the band 5150-5250 MHz is only for indoor usage to reduce
potential for harmful interference to co-channel mobile satellite systems.
les dispositifs fonctionnant dans la bande 5150‐5250 MHz sont réservés uniquement pour
une
utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de
satellites mobiles utilisant les mêmes canaux;
IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limits set forth
for an uncontrolled environment. This equipment should be
installed and operated with minimum distance 20cm between the radiator &
your body.
Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies
pour un environnement non contrôlé. Cet équipement doit être installé et utilisé
avec un minimum de 20 cm de distance entre la source de rayonnement et
votre corps.
1. Basic WEB GUI
a. Connect to WECB (http://www.myarrismocarepeater.net) via web browser
b. Login with admin/password, the web page will be automatically redirected to
device summary page. The read‐only field display in grey out font style.
2. 2.4G WiFi
a. Click “Wireless” tag on the top, the wireless basic setup page will be displayed.
User may modify the wireless setting here.
b. In wireless advanced page, user may change the wireless mode in 11b/g/n mode
and then bridge transmission signals, the SSID also can be updated here.
c. In wireless statistic page, it will display current wireless interface counting
information.
d. In MAC address control page, user may add MAC filter list to block specific device
which connected to WECB.
e. In wireless connected device page, it will display all connected device for current
wireless network.
3. 5G WiFi
a. Click “5GHz Radio” tag on the middle top, the 5G wireless basic setup page will
be displayed. User may modify the wireless setting here.
b. In wireless advanced page, user may change the wireless mode in 11b/g/n mode
and then bridge transmission signals, the SSID also can be updated here.
c. In wireless statistic page, it will display current wireless interface information.
d. In MAC address control page, user may add MAC filter list to block specific device
which connected to WECB.
e. In wireless connected device page, it will display all connected device for current
wireless network.
4. MoCA
a. Click “MoCA” tag on the top, it will show current settings of MoCA interface,
including some extra information, for example, current MoCA version.
b. In MoCA statistic page, it will display current translate information.
c. In MoCA connected device page list, it will show all MoCA devices in the network
and use bold font as local MoCA device MAC address.


---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : VeraHsu
Create Date                     : 2013:12:09 14:29:52+08:00
Modify Date                     : 2013:12:09 16:25:34+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Producer                        : Acrobat Distiller 9.5.3 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2013:12:09 16:25:34+08:00
Format                          : application/pdf
Title                           : Microsoft Word - ARRIS WECB guide-WEB GUI_FCC_IC-ok.docx
Creator                         : VeraHsu
Document ID                     : uuid:1afb36fc-6589-4242-8114-21e792f9d1da
Instance ID                     : uuid:af6ca2e7-5899-4ef8-8b51-ce80f0ae87dc
Page Count                      : 14

EXIF Metadata provided by EXIF.tools