ARRIS XBB1 Battery Backup User Manual Reference Guide
ARRIS Group, Inc. Battery Backup Reference Guide
ARRIS >
User manual
Touchstone XBB1-A Battery Backup Device Reference Guide Release 2.5 DRAFT 1.4 October 2016 October 2016 Touchstone XBB1-A Battery Backup Device Reference Guide Release 2.5 DRAFT 1.4 ARRIS Copyrights and Trademarks © 2016 ARRIS Enterprises LLC. All Rights Reserved. No part of this publication may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation, or adaptation) without written permission from ARRIS Enterprises LLC. (“ARRIS”). ARRIS reserves the right to revise this publication and to make changes in content from time to time without obligation on the part of ARRIS to provide notification of such revision or change. ARRIS and the ARRIS logo are all trademarks of ARRIS Enterprises LLC. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks or the names of their products. ARRIS disclaims proprietary interest in the marks and names of others. ARRIS provides this guide without warranty of any kind, implied or expressed, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. ARRIS may make improvements or changes in the product(s) described in this manual at any time. The capabilities, system requirements and/or compatibility with third-party products described herein are subject to change without notice. Patent Notice Protected under one or more of the following U.S. patents: http://www.arris.com/legal Other patents pending. Table of Contents 1. Safety Requirements ............................................................................................... 4 2. Battery Disposal Guidelines ..................................................................................... 5 3. Product Overview ................................................................................................... 6 4. Installing the XBB1-A Battery Backup Device ........................................................... 7 If Your TG3482 Was Shipped With a Standard Power Cable .................................... 7 If Your TG3482 Was Shipped With a XBB1-A Battery Backup Device....................... 8 5. Index .................................................................................................................... 11 Release 2.5 DRAFT 1.4 October 2016 © 2016 ARRIS Enterprises LLC. All Rights Reserved. Touchstone XBB1-A Battery Backup Device Reference Guide Chapter 1 Safety Requirements The ARRIS Battery Backup Device complies with the applicable requirements for performance, construction, labeling, and information when used as outlined below: CAUTION Risk of shock Mains voltages inside this unit. No user serviceable parts inside. Refer service to qualified personnel only! CAUTION Risk of explosion Replacing the battery with an incorrect type, heating a battery above 75°C, or incinerating a battery, can cause product failure and a risk of fire or battery explosion. Do not dispose of in fire. Recycle or dispose of used batteries responsibly and in accordance with local ordinances. Do not use product near water (i.e. wet basement, bathtub, sink or near a swimming pool, etc.), to avoid risk of electrocution. The product shall be cleaned using only a damp, lint-free, cloth. No solvents or cleaning agents shall be used. Do not use spray cleaners or aerosols on the device. Do not locate the equipment within 6 feet (1.9 m) of a flame or ignition source (i.e. heat registers, space heaters, fireplaces, etc.). Equipment should be installed near the power outlet and should be easily accessible. In areas of high surge events or poor grounding situations and areas prone to lightning strikes, additional surge protection may be required (i.e. PF11VNT3 from American Power Conversion). Ensure proper ventilation. Position the Battery Backup Device so that air flows freely around it. Do not mount the Battery Backup Device on surfaces that are sensitive to heat and/or which may be damaged by the heat generated by the device or other accessories. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. Release 2.5 DRAFT 1.4 October 2016 © 2016 ARRIS Enterprises LLC. All Rights Reserved. Touchstone XBB1-A Battery Backup Device Reference Guide Chapter 1: Battery Disposal Guidelines Battery Disposal Guidelines To ensure compliance with current and future rechargeable battery take-back laws, ARRIS has joined Call2Recycle, a collection program for rechargeable batteries throughout North America. US and Canadian customers should visit http://www.call2recycle.org to properly recycle your lithium-ion battery backup units (BBUs). Release 2.5 DRAFT 1.4 October 2016 © 2016 ARRIS Enterprises LLC. All Rights Reserved. Touchstone XBB1-A Battery Backup Device Reference Guide Chapter 2 Product Overview The XBB1-A Battery Backup Device is a backup battery unit that is capable of providing secondary DC voltage to a TG3482 Telephony Gateway through the use of an internal rechargeable lithium-ion battery. The battery can provide at least eight hours of on-hook backup time to the TG3482. The XBB1-A charges its internal battery by using DC power from the connected TG3482. In addition, the XBB1-A will notify you if any significant events occur (for example, if the battery is removed or is no longer operational). Release 2.5 DRAFT 1.4 October 2016 © 2016 ARRIS Enterprises LLC. All Rights Reserved. Touchstone XBB1-A Battery Backup Device Reference Guide Chapter 3 Installing the XBB1-A Battery Backup Device Your TG3482 Telephony Gateway may be shipped with a standard power cable, or it may be shipped with a XBB1-A Battery Backup Device. If Your TG3482 Was Shipped With a Standard Power Cable If your TG3482 Telephony Gateway was shipped with a standard power cable, follow these steps to install the XBB1-A Battery Backup Device: 1. Disconnect the standard power cable from the power cord connector on the back of the TG3482. Release 2.5 DRAFT 1.4 October 2016 © 2016 ARRIS Enterprises LLC. All Rights Reserved. Touchstone XBB1-A Battery Backup Device Reference Guide Chapter 3: Installing the XBB1-A Battery Backup Device 2. Insert the custom end of the standard power cable into the appropriate connector on the XBB1-A's internal battery. The custom end of the cable looks like the following photo and is designed to fit either into either the power cord connector on the back of the TG3482 or into the XBB1-A's internal battery. 3. Insert the custom end of the XBB1-A into the power cord connector on the back of the TG3482. 4. Insert the polarized AC plug into a standard power outlet. 5. Double-check that the AC power cord is securely connected to the body of the battery unit. As long as all of the connections for the XBB1-A are securely made, the XBB1-A will provide power to your TG3482, and the battery unit will charge. If the power supply is interrupted after the battery is fully charged, then the battery will provide DC power to the TG3482. Once AC power is restored, the battery unit will begin to charge again. If Your TG3482 Was Shipped With a XBB1-A Battery Backup Device If your TG3482 Telephony Gateway was shipped with a XBB1-A Battery Backup Device, follow these steps to install the XBB1-A Battery Backup Device: Release 2.5 DRAFT 1.4 October 2016 © 2016 ARRIS Enterprises LLC. All Rights Reserved. Touchstone XBB1-A Battery Backup Device Reference Guide Chapter 3: Installing the XBB1-A Battery Backup Device 1. Insert the custom end of the XBB1-A into the power cord connector on the back of the TG3482. The custom end of the XBB1-A Battery Backup Device looks like the following photo and is designed to fit into the power cord connector on the back of the TG3482. 2. Insert the polarized AC plug into a standard power outlet. 3. Double-check that the AC power cord is securely connected to the body of the battery unit. As long as all of the connections for the XBB1-A are securely made, the XBB1-A will provide power to your TG3482, and the battery unit will charge. If the power supply is interrupted after the battery is fully charged, then the battery will provide DC power to the TG3482. Once AC power is restored, the battery unit will begin to charge again. Release 2.5 DRAFT 1.4 October 2016 © 2016 ARRIS Enterprises LLC. All Rights Reserved. Touchstone XBB1-A Battery Backup Device Reference Guide Index Battery Disposal Guidelines • 5 Installing the XBB1-A Battery Backup Device • 7 Product Overview • 6 Safety Requirements • 4 Release 2.5 DRAFT 1.4 October 2016 © 2016 ARRIS Enterprises LLC. All Rights Reserved. Touchstone XBB1-A Battery Backup Device Reference Guide 11 Corporate Headquarters ARRIS · Suwanee · Georgia · 30024 · USA T: 1-678-473-2000 F: 1-678-473-8470 www.arris.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 1 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:9ab3abb9-a9e4-11f2-0000-02c7314339d4 Producer : GPL Ghostscript 9.18 Modify Date : 2017:07:26 06:02:50Z Create Date : 2017:07:26 06:02:50Z Creator Tool : UnknownApplication Document ID : uuid:9ab3abb9-a9e4-11f2-0000-02c7314339d4 Format : application/pdf Title : UntitledEXIF Metadata provided by EXIF.tools