ASA Electronics JRV9000 Car Multimedia Player User Manual

ASA Electronics Shenzhen Limited Car Multimedia Player

UserManual.wiki >

ASA Electronics >

JRV9000 User Manual HTML Version

User Manual

JRV9000

Operation Manual

6.2” Double DIN Multimedia Receiver

DVD / NAV / SiriusXM Ready™ / Built-In BT

/ doPi - enohPi / ygolonhceT MHL / HDMI / USB / AV In

JRV9000

Android is a trademark of Google Inc.

microSD is a trademark or registered trademark of SD-3C, LLC in the United States,

other countries or both.

Sirius, XM and all related marks and logos are registered trademarks of Sirius XM

JRV9000

CONTENTS

Features ...�� 5

Controls and Indicators ..........�� 8

Remote Control ..... ��10

External Devices ......�.��13

Quick Start ................�.��14

Audio Equalizer .....................�.��17

System Settings ....�.��19

Disc Operation �.��.....��28

AM-FM Radio ......................�.��.��40

USB / MicroSD card...............�.��........��45

iPod®/ iPhone® Connectivity�.��.��50

AV-In1 / AV-In2 .....................�.��53

BT / Hands Free Calling...........�.��.57

Camera Operation .........................�.��.�65

Steering Wheel Controls (SWC) ..............................�.��.��67

SiriusXM® Radio .......................�.��.��.69

Care and Maintenance .......�.��.��85

Specifications �.��.....��.��86

Notes �.��...��.��88

Common Replacement Parts��..Back Cover

HDMI / MHL Connectivity .....�.��54

Troubleshooting ......................�.��.��.81

JRV9000

FCC Statement

1. This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that

may cause undesired operation.

2. Changes or modications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if

not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined

by turning the equipmen and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an

uncontrolled environment. This equipment should be installed and operated with

minimum distance of 20 centimeters between the radiator and your body.

“Made for iPod,” and “Made for iPhone” mean that an electronic accessory (This head unit) has

been designed to connect specically to iPod®/, or iPhone® , respectively, and has been certied by

the developer to meet Apple performance standards.

Apple is not responsible for the operation of this device or its compliance with safety and regulatory

standards. Please note that the use of this head unit with iPod® or iPhone® may aect mobile

phone performance.

iPod®/ iPhone® are trademarks of Apple Inc., registered in the U.S. and other countries.

Connect the equipment into an outlet on a circuit dierent from that to which the

receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

JRV9000

Thank you for choosing a Jensen product. We hope you will find the instructions

in this owner’s manual clear and easy to follow. If you take a few minutes to look

through it, you’ll learn how to use all the features of your new Jensen JRV9000

Multimedia Receiver for maximum enjoyment. Please save this manual for future

reference.

We recommend having your Jensen JRV9000 Multimedia Receiver installed by a

reputable installation shop.

FEATURES

DVD

• Audio Equalizer

• Next Chapter and Previous Chapter

• Play/Pause

• Track Direct Entry

• Disc Menu

• Selection Repeat / Track Repeat

• Disc Audio

• Disc Language

• Pic Control

CD / MP3 / WMA

• CD-Text Compatible

•ID3 Tag Compatible

• Directory Search (MP3 / WMA Only)

• MP3 and WMA Files on a DVD+R / RW

• Audible Forward / Reverse Track Search (CD-DA Only)

• Random, Repeat and Intro

• Play, Pause, Stop, Next Track and Previous Track

AM-FM

• USA / European Frequency Spacing

• 30 Station Presets (18 FM / 12 AM)

• Auto Stereo / Mono

• Local / Distance

• Auto Store / Preview Scan

iPod®/iPhone®

• iPod®/ iPhone® via USB

•High Speed Direct Connect Interface to Access iPhone® and iPod® Playlists,

Artists, Albums

• Power Management Charges iPhone® / iPod® while Connected

JRV9000

SiriusXM Ready®

• Satellite Channel Name, Artist, Song, and Categories Displayed on Monitor

(Vehicle Tuner and Subscription required and sold separately)

Chassis

• 2.0 DIN (Import / ISO-DIN Mountable)

• Fixed Front Panel

• 6.2” High Definition TFT LCD

• 800h x 480w x RGB WVGA

General

• Beep Tone Confirmation (ON-OFF Option)

•BT Hands-Free operation for safety and convenience and A2DP for streaming

music from your smartphone.

• One Composite Video Output for Additional Screens

• Front Panel Audio/Video Input

• Front Panel USB - Playback Music / Video Files via Portable Hard Drives / USB

flash drives

•Ten-Band Graphic Equalizer

• 6VRMS Front / Rear / Subwoofer RCA Line Output

• Touch Screen Calibration Mode

• Rotary Encoder Audio Control

Camera

•The JRV9000 can connect with 3 cameras: CAM1, CAM2, CAM3. Each camera

can be triggered separately and can be set in different trigger priority.

•HDMI / MHL Connectivity - See and control smartphone apps on the larger

TFT screen. *Some apps may not be supported.

Built-In Navigation

• USA and Canada Map Data (Tele Atlas)

• >10 Million Points of Interest

• 8GB SD Card w/ Navigation Software

• Latest Map Guarantee (Must be redeemed within 30 days of initial activation)

• 13 Natural Voice Languages for Navigation Guidance

• iGo Primo Next Gen Navigation Engine

•USB Charging Current - 2.1 Amp Support

JRV9000

WARNING! Never install this unit where operation and viewing could

interfere with safe driving conditions.

WARNING! To reduce the risk of a traffic accident (except when using for

rear view video camera) never use the video display function while driving

the vehicle. This is a violation of federal law.

WARNING! Never disassemble or adjust the unit.

WARNING! To prevent injury from shock or fire, never expose this unit to

moisture or water.

WARNING! Never use irregular discs.

WARNING! Using an improper fuse may cause damage to the unit and

result in fire.

JRV9000

CONTROLS AND INDICATORS

AV AUX

USB

MUTE

OPEN

JRV9000 Controls and Indicators

1. Disc Slot:

Accepts DVD/CD/MP3 discs. If the unit is turned on, playback begins when a

disc is inserted.

2. LCD Screen and Touch Screen:

Touch icons on this screen to access menus or control functions.

3. Remote Sensor:

Used to receive command signals from the remote control.

4. 3.5mm AV IN Jack:

This connector accepts a 3.5 mm jack through which signals from various

audio/video devices can be applied to the unit.

5. MicroSD Card Slot:

Used to insert microSD cards containing navigation software. Do not delete

or modify SD card contents.

JRV9000

6. USB Slot:

Used to connect an iPhone/iPod®, MP3 player or USB flash drive for

playback of music/video files.

7. Interface Cover:

Covers the 3.5mm AV In, MicroSD card and USB slot.

8. Reset Button:

Press this button to reset the system settings (except password and parental

lock settings) and to correct a system halt or other illegal operation. Use the

tip of a pen to press the Reset button.

9. Power On/Off ( ) Button / Rotary Volume ( ) Knob / Mute Button

Press to turn the unit ON. Press and hold to turn the unit OFF.

Rotate the knob to adjust the volume.

Press the knob momentarily to mute the audio. Press the knob again to

restore the audio.

10. Menu Button:

Press this button to access the Main Source Menu.

11. Eject ( ) Button:

Press this button to eject a DVD/CD/MP3 disc. Disc play is stopped, the disc is

ejected and the unit will change to radio operation. If the disc is not removed

from the unit and the button is pressed again, the disc will be re-loaded. If the

disc is not removed from the disc slot within 10 seconds of being ejected, it

will be automatically reloaded to prevent it from being accidentally damaged.

JRV9000

NOTES ON REMOTE CONTROL USAGE

• Aim the remote control at the TFT/screen.

•Remove the battery from the remote control or insert a battery insulator if

the remote control will not be used for a month or longer.

•DO NOT store the remote control in direct sunlight or in a high

temperature environment, or it may not function properly.

•The battery will last for 6 months under normal conditions. If the remote

control does not work, please change the battery.

• Use lithium battery type CR2025 (3V) only.

• DO NOT recharge, disassemble, heat or expose the battery to fire.

• Insert the battery in the proper direction according to the ( + ) and ( - ) polarity

marks.

•Store the battery in a place where children cannot reach it to avoid the risk

of an accident.

JRV9000

Remote Control Function Description

1.SOURCE (SRC) Button: Press this button to switch between and select

available sources. (Radio/Disc/Phone/USB/Phone-Audio/SWC/AUX-1/AUX-2/

Camera)

2. EJECT Button ( ): Press this button to eject a DVD/CD/MP3 disc. Disc play is

stopped, the disc is ejected and the unit will change to radio operation. If the

disc is not removed from the unit and the button is pressed again, the disc will

be re-loaded. If the disc is not removed from the disc slot within 10 seconds

of being ejected, it will be automatically reloaded to prevent it from being

accidentally damaged.

3. AUDIO Button: Press to display and select the audio language in DVD mode.

Each time the button is pressed, the language changes. NOTE: The languages

for audio vary from disc to disc.

4. EMULOV Button (VOL + and -): Press these buttons to increase or decrease

the playback volume.

7. MUTE Button: Press this button to turn the audio output ON and OFF.

8. POWER Button ( ): Press this button to turn the unit ON and OFF.

9. SUBTITLE (SUB-T) Button: Press to display and select the subtitle language in

DVD mode. Each time the button is pressed, the subtitle language changes.

NOTE:

The type and number of languages for subtitles vary from disc to disc.

10. MENU Button: Press this button to access the root menu of a DVD or CD

during playback. The disc will return to normal playback and the root menu

will disappear if no selection is made within 10 seconds.

11. FAST FORWARD [ ] Button: Press this button to forward Disc play 2x, 4x, 8x

or 20x normal speed. Press this button while in Radio mode to search available

radio station by increasing tuning frequency.

5. BAND Button: Press this button to scroll though preset stations or when in

disc mode, this button is used for Fast playback / Slow playback. Press this

button to answer an incoming BT phone call.

6. REPEAT (RPT) Button: Repeat playback

JRV9000

15. FAST REVERSE [ ] Button: Press this button to reverse Disc play 2x, 4x, 8x

or 20x normal speed. Press this button while in Radio mode to search available

radio station by decreasing tuning frequency.

16. NUMBER Buttons (1-6): Press these buttons to directly access chapters and

tracks, dialing phone numbers, or entering passwords.

17. RANDOM (RDM) Button: Press this button to play tracks or chapters in

random order while playing a disc.

12. NEXT (l) Button: Press this button to skip to the next chapter, track or

song during playback of a disc. Press this button while in Radio mode to

search available radio station by increasing tuning frequency.

13. PLAY / PAUSE ( ) Button: Press this button to pause the playback of a

disc. Press this button again to resume normal playback.

14. PREVIOUS (l) Button :: Press this button to go back to the previous

chapter, track or song during playback of a disc. Press this button while in

Radio mode to search available radio station by decreasing tuning frequency.

JRV9000

EXTERNAL DEVICES

Connecting External Devices

External devices, including a game console, video camera, etc. can be connected

to this unit using its front A/V In 3.5mm connector (AV In1), the rear RCA inputs

(AV In 2) or the USB port.

You cannot directly control external devices connected to the A/V inputs using

the front panel controls or this unit’s remote control.

AV In 1

AV In1 is used for playback of audio/video from an external device connected to

the unit through a 3.5mm connector. The unit can increase or decrease the

volume of the connected device. All other controls are done on the connected

device. Select AV In1 to playback audio/video from the front panel 3.5mm AV In.

AV In 2

AV In2 is used for playback of audio/video from an external device connected to

the RCA connectors located on the back of the unit (see the JRV 9000 Installation

Guide). The unit can increase or decrease the volume of the connected device. All

other controls are done on the connected device. Select AV In 2 to playback audio/

video from the rear RCA AV In

AV INPUT

OPEN

3.5mm A/V Cable (not included)

Video

Left Audio

Right Audio

Ground

USB Cable (not included)

Connecting External Devices

MicroSD card slot

AV AUX

USB

MUTE

JRV9000

QUICK START GUIDE

Turning the Unit ON or OFF

Press the front panel volume knob to turn the unit ON. Press and hold the volume

knob > 1 second to turn the unit OFF.

Selecting an Audio/Video Source, Phone, Steering

Wheel Controls, Backup Camera

To select a source:

1. Press the front panel MENU button or touch the Source icon to view the Main

Source Menu

JRV9000 Front Panel

2. Touch the desired source icon on one of the two main menu screens. Screen

1 of 2: Disc, Radio, USB, AV-IN1, SXM, BT, Navigation, or HDMI / MHL. Touch

Next at the bottom of the screen to access Screen 2 of 2: Steering Wheel

Controls (SWC), AV-IN2, Settings, or camera.

Button

AV AUX

USB

JRV9000

System Settings Adjustment

To access and adjust system settings:

1. Touch the Settings ( ) icon on the Main Menu screen to enter the SETTINGS

MENU. Sub-menus where adjustments can be made will be highlighted.

Volume Adjustment / Turn On Volume

To increase or decrease the volume level, rotate the rotary encoder knob. The

unit’s front panel screen will display the volume level for 2 seconds. The

volume level ranges from 0 to 50. To set the Turn-On volume, press and hold

the rotary encoder knob 1 second while the volume bar is displayed

after setting the desired volume level. You will hear 2 beeps to confirm the

new Turn-On volume level.

Audible Beep Conrmation

An audible beep tone confirms each function selection. The beep tone can be

disabled through the Setup menu.

Muting the Audio

Press the front panel volume knob ( ) to mute the audio from the unit. Mute

icon is displayed on the LCD screen. Press the front panel volume knob again to

restore the audio volume to its previous level. Adjusting the volume or using any

of the audio setup features cancels the mute function.

Equalizer Controls

Equalizer (EQ): Adjustment can be made after entering one of the audio/video

sources (Disc, Radio, USB, AV-IN or SXM).

Touch the Equalizer (EQ) icon to view the Equalizer Control Screen to select a

desired preset setting (Optimal, Classic, Rock, Jazz, Techno or Pop), Flat setting,

custom User setting, make adjustments to the audio Balance and Fader levels or

to turn the Loudness option ON or OFF. Touch the Source icon to return to the

current source.

JRV9000

Playing a Disc

To begin playback of an Audio/Video Disc:

1. Press the front panel Power On/Off ( ) button / Rotary Volume ( ) knob /

Mute button to turn the unit ON.

2. Insert a disc with the label side facing up. Playback will begin automatically.

To eject a disc:

1. Press the front panel Eject ( ) button.

Resetting the System

Soft Reset - To correct a system halt or other illegal operation, use the tip of a pen

to press and release the reset button located just below the front panel interface

cover.

Reset

System Reset Button

After a system reset, the unit restores all factory default settings.

Note: If the unit is reset while a DVD is playing, the unit will return to Main Menu

once the reset is complete.

Parking Brake Inhibit

When the pink “Parking” wire is connected to the vehicle Parking Brake circuit, the

front LCD monitor will display video when the Parking Brake is engaged.

Note: If the pink "parking" wire is not connected to the vehicle Parking Brake

circuit, video will not be displayed on the LCD monitor for safety.

JRV9000

EQUALIZER CONTROL MENU

Adjusting Equalizer Controls

The Equalizer adjustment screen allows the user to easily adjust the audio system

to meet the acoustical characteristics of the vehicle. The acoustical characteristics

vary depending on the type of vehicle and measurements.

The Balance/Fader levels and Loudness ON/OFF option of a selected audio/video

source (Disc, Radio, USB/iPod®, AV-IN1, AV-IN2 or SXM) is also adjusted through

the Equalizer adjustment screen.

Equalizer (EQ) (10 Band)

Touch the Equalizer (EQ) icon to view and select a desired preset setting

(Optimal, Classic, Rock, Jazz, Techno or Pop) or Flat setting.

Note: Presets are locked and cannot be adjusted.

Equalizer Adjustment Screen

1. Select a desired frequency range to be adjusted (31.5, 62.5, 125, 250, 500, 1K,

2K, 4K, 8K or 16K).

2. Touch and move the slide bar Up / Down to adjust the amount of boost/cut

from +10/-10dB.

User Setting

Touch the User icon to customize each of the equalizers 10 frequency bands.

Flat Setting

Touch the Flat icon to set the equalizers frequencies to the midpoint (0dB).

JRV9000

Reset

Touch the Reset icon to reset the 10 equalizer band frequencies to the mid point.

Loudness

Touch the Loud icon to turn the loud option ON or OFF. The loud option

automatically alters the frequency response curve of audio to make it sound more

natural when played at a lower volume level.

Exiting the Equalizer

To exit the Equalizer menu touch the Source icon to return to the current source.

Fader-Balance

Balance - Touch the FAD-BAL icon on the left side of the equalizer screen to

display the balance/fader screen.

Fade-Balance Adjustment Screen

Balance - This feature is used to balance the audio output levels between the

left and right side of the vehicle. Touch the  or  icons to change the balance

control settings -20 (Left) to +20 (Right). The setting can also be changed by

touching screen within the grid to move the sphere.

Fader - This feature is used to fade the audio output levels between the front and

rear of the vehicle. Touch the  or  icons to change the fade control settings -20

(Rear) to +20 (Front). The setting can also be changed by touching screen within

the grid to move the sphere.

Sub (Subwoofer) - This feature is used to reduce or increase the subwoofer sound

level. Touch the slide bar  or  icons to adjust the settings.

Exiting the Balance-Fader

To exit the balance-fader touch the Source icon on the top left corner of the screen.

JRV9000

SYSTEM SETTINGS

To access System Settings, touch the icon on the Main Menu screen. There are

seven System Settings Sub-Menus (General, Audio, Time, Language, BT,

DVD or Volume) that are used to adjust the performance of each option of

the JRV9000. The Version Sub-Menu is for information only. Touch a desired

Sub-Menu and the Sub-Menu will appear highlighted. The features available

for adjustment will appear on the screen.

System Settings Screens

Adjusting a Sub-Menu Feature

1. Touch the Sub-Menu feature to be adjusted.

2. Touch the  or  icon to view the previous or next feature page, if

applicable. An options list appears on the right.

3. Touch the desired feature option once to make selection then touch again to

conrm the selection.

General Sub-Menu Features - Radio Region/Frequency Spacing

USA -

China

Japan

Europe

Europe (LW)

OIRT

FM - 200kHz / AM - 10kHz

Radio Lo/Dx - Touch the Distance or Local to increase or decrease radio tuning

sensitivity to receive local or distant stations.

TFT Standby - Touch OFF, 10s or 20s to set the unit’s front panel TFT LCD screen

to stay ON continuously or to turn o the screen after 10 or 20 seconds.

Display Adjust - Touch Night, Dark, Normal or Bright to set the unit’s front panel

TFT LCD screen to be adjusted for day and night conditions.

- FM - 50kHz / AM - 9kHz

- FM - 100kHz / AM - 9kHz

- FM - 50kHz / AM - 9kHz

- FM - 50kHz / AM - 9kHz / LW - 30kHz

- FM - 50kHz / AM - 9kHz / OIRT - 30kHz

JRV9000

Beep - Touch ON or OFF to turn the selection confirmation beep ON or OFF.

Calibration- The Touch Screen Calibration adjustment is used to set the

parameters of the touch screen to ensure that when the screen is touched, it

corresponds to the feature desired.

Note: Never use a pen or sharp object to calibrate the touch screen as this will

damage the panel.

1. Touch the Calibrate icon and the first screen will appear with instructions.

2. Follow the instructions on the screen touching and momentarily holding

finger or a stylus to the center of the target for 2 seconds. Repeat as the target

moves to each corner of the screen and finally to the center.

Calibration Screen

3. The second screen will appear:

Calibration Screen Confirmation

4. If the screen is touched, the new calibration parameters will be accepted. If

the screen is not touched within thirty seconds, the new parameters will be

disregarded.

JRV9000

Illumination - Customize the front panel illumination. Touch to change the

illumination color. Select a color or touch Custom > Adjust to select the color

palette.

Custom Color - Select Custom1, Custom2, or Custom3 and then adjust to

adjust your custom color. Select desired color on color gradient or by pressing

- and + for RGB values. After desire color is selected press Enter key to save.

UI Color - Touch green, red, amber, blue or purple to select the user

Demo - Touch ON or OFF to turn the demonstration mode ON or OFF. The factory

default setting is ON.

Touch More to set camera conguration settings. See

“Camera Operation” on page 66.

Audio Sub-Menu Features

The Audio Sub-Menu is used to turn the Subwoofer output ON or OFF and

to select a Subwoofer crossover frequency.

Audio Sub-Menu Screen

Subwoofer - Touch ON or OFF to turn the subwoofer output ON or OFF.

Subwoofer Filter - Touch a crossover frequency (80Hz, 120Hz or 160Hz)

to set a cut-o frequency for the subwoofer’s low-pass lter (LPF).

JRV9000

Time Sub-Menu Features

The clock appears in the top right corner of the screen during certain operations.

Note: The AM/PM indication will change as you continue to adjust the hour

past 12.

Time Sub-Menu Screen

Date - Touch the Date icon and use the  or  icons to set the day, month, and

year. After setting the date, touch Save. The date will appear to the right of the

Date option.

Clock Mode - Touch 12Hr to set the clock display to 12 hour time intervals using

AM and PM. Touch 24Hr to set the clock display to a 24 hour time interval (or

military time).

Time - Touch the Time icon and use the  or  icons to set the hour, minute, and

either AM or PM. After setting the time, touch Save. The time will appear to the

right of the Date option.

Date Settings Time Settings

Date and Time Setting Screens

JRV9000

Language Sub-Menu Features

If a DVD supports more than one Subtitle or Audio language, all the languages are

available for selection during playback. If the selected language is not supported

by the DVD, then the default language is used.

Language Sub-Menu Screen

On Screen Display (OSD) - Touch English, Spanish or French to select the

language for the OSD Display.

DVD Audio - If available, this feature allows the user to select one of the

languages contained on the disc for the DVD audio.

DVD Subtitle - If available, this feature allows the user to select one of the

languages contained on the disc for the DVD subtitles.

Disc Menu - Allows the user to select one of the languages contained on the disc

menu.

JRV9000

BT Sub-Menu Features

The BT audio capabilities can be used for hands free applications. Before

attempting to use the BT functions on this unit, please make sure the mobile

phone to be connected supports BT functions.

BT Pairing Code Screen 2

BT - Touch ON or OFF to turn the BT function ON or OFF.

Auto-Connect - Touch ON or OFF to turn the BT Auto-Connect function ON or

OFF.

Auto-Answer - Touch ON or OFF to turn the BT Auto-Answer function ON or

OFF.

Pairing - This feature allows the user to create a unique 4 digit code for

pairing BT devices to the unit. The factory default pairing code is “1234”.

1. Touch the Paring Code icon and the Pairing Code entry screen will appear.

2. Use the keyboard to enter a unique 4-digit Pairing Code.

Touch OK to conrm 4 digit pairing code.

Note: If a wrong digit is entered touching the arrow will remove the

number.

Pairing Code Entry Screen Pairing Code Conrm tion Screen

Pairing Code Screens

JRV9000

DVD Sub-Menu Features

The DVD system has a built-in parental lock feature to prevent unauthorized

persons from viewing restricted disc content. By default, the rating system is

unlocked. Once set up, the parental lock is released only by entering the correct

password. Once the password is entered, rating is available for setup.

DVD Sub-Menu Screen

Set Password - This feature allows the user to create a unique 4-digit password to

activate or deactivate the “Rating” option.

1. Touch the Set Password Code icon and the password entry screen will appear.

2. Use the keyboard enter a unique 4 digit Password.

NOTE: If a wrong digit is entered touching the green arrow will remove the

number.

3. Touch OK to conrm 4 digit Password.

Password Entry Screen Password Conrm tion Screen

DVD Password Screens

Rating Level - Select the appropriate rating level for the intended viewing

audience (Kid Safe, G, PG, PG-13, PG-R, R, NC-17, and Adult). The user may override

higher ratings by using the password.

DRC - This feature allows the user to turn the Dynamic Range Control ON for

better playback for low volumes or OFF.

JRV9000

Load Factory - This feature allows the user to “Reset” the factory default settings

(Rating system only).

To reset the password, access the “RATING” menu and enter the current password.

Once the correct password is entered, you can access the “Password” eld and

enter a new one.

Note: Record the password and keep it in a safe place for future reference. The

rating for each disc is marked on the disc, disc package, or

documentation. If the rating is not available on the disc, the parental

lock feature is unavailable. Some discs restrict only portions of the disc,

allowing the appropriate content will play. For details, please refer to

the disc description.

Loading factory settings will clear the parental contol password of SXM.

Volume Sub-Menu Features

The Volume Sub-Menu allows the user to increase or decrease the relative

volume (+/- 6dB) of the audio output of each source individually.

Volume Sub-Menu Screen 1 Volume Sub-Menu Screen 2

Volume Sub-Menu Screens

DVD - Touch the DVD icon to enter the setting, then use the  or  icons

increase or decrease the relative volume level between -6 to +6.

USB - Touch the USB icon to enter the setting of the connected device, then use

the  or  icons to increase or decrease the relative volume level

between -6 to +6.

Radio - Touch the Radio icon to enter the setting, then use the  or  icons

increase or decrease the relative volume level between -6 to +6.

BT - Touch the BT icon to enter the setting of the connected device, then use

the  or  icons to increase or decrease the relative volume level between

-6 to +6.

JRV9000

AV In 1 - Touch the AV In 1 icon to enter the setting of the connected device

then use the  or  icons to increase or decrease the relative volume level

between -6 to +6.

AV In 2 - Touch the AV In 2 icon to enter the setting of the connected device

then use the  or  icons to increase or decrease the relative volume level

between -6 to +6.

iPod - Touch the iPod icon to enter the setting then use the  or  icons to increase

or decrease the relative volume level between -6 to +6.

SXM - Touch the SXM icon to enter the setting then use the  or  icons to increase

or decrease the relative volume level between -6 to +6.

The default relative volume level setting for all available sources is “0”.

Version Sub-Menu Features

The Version Sub-Menu is used to identify the model and resident

operating system as well as the hardware and software versions.

Version Sub-Menu Screen 1 Version Sub-Menu Screen 2

Exiting the System Setup Menu

To exit setup mode and resume normal playback, touch the Source icon on the

screen.

Navigation - Touch the Navigation icon to enter the setting of the connected

device then use the  or  icons to increase or decrease the relative volume level

between -6 to +6.

JRV9000

DISC OPERATION

Compatible Audio Discs Types

This system will play the following types of discs:

• DVD - DVDs that contain audio and/or video.

• Audio discs - Audio CDs that contain audio files.

• MP3 discs - A disc that contains audio, video and image files (for example, a

CD-R with downloaded MP3 files).

Note: This unit is designed to play pre-recorded (original) CD/DVDs. Some

burned CD/DVD's may not play due to different recording formats/speeds.

DVD Operation

Note: When properly installed, DVD video cannot be displayed on the

main TFT screen unless the parking brake is applied. If you attempt to

play a DVD while the vehicle is moving, the TFT screen displays:

Warning: It is illegal to view

video while driving or

operating a motor vehicle.

Set parking brake to view

video.

From the Main Menu Screen touch the DISC Icon or insert a disc into the disc slot,

label side up. Playback begins when a disc is inserted correctly.

DVD Main Menu

When a DVD is playing, touch the TFT LCD screen to view the DVD main menu. The

on-screen icons and touch key areas are outlined below.

DVD Main Menu

Source Icon - Touch this icon to return to the Main Menu Screen.

DVD - Displays the current source.

JRV9000

Title/Chapter Information - The title/chapter information displayed is the current

number of the track playing, the total number of tracks on the disc, the current

chapter playing and the total number of chapters on the disc.

Time Display - This indicator displays the time as entered by the user in the

Settings Menu.

Chapter Elapsed Playback Time - The elapsed playback time of chapter is

displayed on the screen.

Total Playback Time - The total playback time of disc is displayed on the screen.

More ( / ) - Touch the / icons to display the next or previous page of the

Disc menu.

( EQ ) Equalizer - Touch this icon to access the Equalizer Control Menu.

(See “Adjusting Equalizer Controls”)

( ) Previous - Touch this icon to play the previous track.

( ) Play/Pause - Touch this icon to begin disc playback. Touch this icon again to

pause disc playback.

( ) Next - Touch this icon to play the next track.

Direct Entry - Touch this icon to the display the Direct Entry Screen.

Menu - Touch this icon to view the DVD root menu.

A-B - Touch to repeat a specific portion from point A to point B of the disc.

During playback touch A-B to set the starting point A. Touch A-B a second time

to set the ending point B. The player will repeatedly play the part between Point

A and Point B. Touch A-B a third time to cancel A-B repeat and resume playback.

Audio - Touch this icon to select an audio language for DVD playback. The audio

language selection depends on the languages contained on the disc.

Language - Touch this icon to select a subtitle language for DVD playback. The

subtitle language selection depends on the languages contained on the disc.

JRV9000

( ) Repeat - Touch this icon during playback to repeat the current chapter.

The icon on the screen will light and small letter C will appear below the icon and

the chapter will repeat. Touch this icon a second time to repeat the current title.

The icon on the TFT LCD screen will light and small letter T will appear below the

icon and the title track will repeat. Touch the icon a third time to repeat the title

and chapter. The icon on the main TFT LCD screen will light and small letter A will

appear below the icon and the title and chapter will repeat. Touch the icon again

the repeat function will be cancelled. The icon on the main TFT LCD screen will

dim and playback of the remainder of the disc will resume.

PIC - When the PIC icon is touched the picture adjust screen appears. Touch this

icon during playback to adjust the color brightness, contrast, saturation and hue.

The levels can be adjusted to suit the users preferences. The adjustments are

accomplished by touching the + or - icons to decrease or increase the desired

setting. The settings have range of 1 to 20.

Note: The Picture Adjustment Screen will turn OFF automatically if no

adjustment is made within ve seconds or any other part of the screen is

touched.

DVD Picture Adjustment Screen

JRV9000

Direct Entry

When the Direct Entry icon is touched the Direct Entry Screen appears. The user

can manually select a title or a chapter. By touching  icon, the user can select a

chapter or title. The title or chapter can be selected by touching the corresponding

number for a title or chapter. After entering the numbers, touch the OK icon. If a

wrong digit is entered, touching the arrow will remove the number. After touching

OK, playback will begin.

DVD Chapter and Title Direct Entry Screen

Inserting a Disc

Upon inserting a DVD disc, DVD mode is entered and disc play begins. A disc

cannot be inserted if there is already a disc in the unit or if the power is o.

Note: If Parental Lock (Rating) is activated and the disc inserted is not

authorized, the 4-digit code must be entered and/or the disc must be

authorized.

Note: DVD-R and DVD-RW will not play unless the recording session is

finalized and the DVD is closed.

Ejecting a Disc- Press the Eject ( ) button on the front of the unit to eject the

disc. The unit automatically reverts to Tuner mode. You may eject a disc with

the unit powered o. The unit will remain off after the disc is ejected.

Resetting the Loading Mechanism - If the disc loads abnormally or an abnormal

core mechanism operation occurs, press and hold the Eject ( ) button on the

front of the unit to reset the loading mechanism. Normal operation resumes.

Accessing DVD Mode - To switch to DVD mode when a disc is already inserted,

touch source on the TFT LCD screen to access the source menu. Touch the disc icon.

JRV9000

Multi-Language Discs (DVD Only)

Changing Audio Language - If you are watching a disc recorded in multiple

languages, touch the TFT LCD screen, then touch AUDIO to choose a language.

Each time the icon is touched the language will change.

Changing Subtitle Language - If you are watching a disc recorded in multiple

languages with subtitles, touch the TFT LCD, then touch Language screen to

choose the language that you would like the subtitles to appear.

Playback Information

During DVD and VCD playback, touch the TFT LCD screen to display playback

information on the screen, including the current playback time.

DVD Playback Information

• DVD Video – Format of current disc.

• Time 00:01:30/00:36:10 – Indicates the playback time of the current track.

• Title 5/08 – Indicates the fifth of 8 titles on the DVD is currently playing.

• Chapter 2/16 – Indicates that the second of 16 chapters on the DVD is currently

playing.

VCD Playback Information

• VCD2.0 – Format of current disc.

• Time 00:01:30/00:36:10 – Indicates the playback time of the current track.

JRV9000

General Disc Information

Disc Properties

Symbol 12cm Disc Properties Max Play Time

Single side single layer (DVD-5)

Single side double layer (DVD-9)

Double side single layer (DVD-10)

Double side double layer (DVD-18)

(MPEG 2 Method)

133 minutes

242 minutes

266 minutes

484 minutes

Single side single layer (VCD) (MPEG 1 Method)

74 minutes

Single side single layer 74 minutes

Disc Symbols

Symbol Meaning

Number of voice languages recorded. The number inside the icon

indicates the number languages on the disc (maximum of 8).

Number of subtitle languages available on the disc (maximum of 32).

Number of angles provided (maximum of 9).

Aspect ratios available. “LB” stands for Letter Box and “PS” stands for

Pan/Scan. In the example on the left, the 16:9 video can be converted

to Letter Box video.

Indicates the region code where the disc can be played.

•Region 1: USA, Canada, East Pacific Ocean Islands

• Region 2: Japan, Western Europe, Northern Europe, Egypt, South

Africa, Middle East

• Region 3: Taiwan, Hong Kong, South Korea, Thailand, Indonesia,

South-East Asia

• Region 4: Australia, New Zealand, Middle and South America,

South Pacific Ocean Islands/Oceania

• Region 5: Russia, Mongolia, India, Middle Asia, Eastern Europe,

North Korea, North Africa, North-West Asia

• Region 6: Mainland China

•ALL: All Regions

JRV9000

CD Operation

From the Main Menu Screen touch the DISC icon or insert a CD into the disc slot,

label side up. Playback begins in CD mode when a disc is inserted correctly.

CD Main Menu

The on-screen icons and touch key areas are outlined below.

CD Main Menu

Source Icon - Touch this icon to return to the Main Menu Screen.

DISC - Displays the current source.

Track Number- Lists the current track playing and the total number of tracks

contained on the disc.

Time Display - This indicator displays the time as entered by the user in the

Settings Menu.

CD Disc Information Display - Displays the artist, the title of the track and the

title of the album.

More ( / ) - Touch the / icons to display the next or previous page of the

Disc menu.

( ) Previous - Touch this icon to play the previous track.

( ) Play/Pause - Touch this icon to begin disc playback. Touch this icon again to

pause disc playback.

( ) Next - Touch this icon to play the next track.

JRV9000

List - Touch this icon to access the list of tracks contained on the disc. Touch a

desired track icon twice and the track will begin playing.

( ) Shuffle - Touch this icon to play tracks in the directory in a random

order. The icon will light on the main CD screen.

( ) Repeat - Touch this icon to repeat playback of the current track. The icon

on the TFT LCD screen will light and small number 1 will appear below the icon

and the track will repeat. Touch this icon a second time and the album will repeat.

The icon on the TFT LCD screen will light and small letter a will appear below the

icon and the album will repeat. Touch the icon again the repeat function will be

cancelled. The icon on the TFT LCD screen will dim and playback of the remainder

of the disc will resume.

( EQ ) Equalizer - Touch this icon to access the Equalizer Control Menu.

(See “Adjusting Equalizer Controls” )

Direct Entry - Touch this icon to the display the Direct Entry Screen.

Track Elapsed Playback Time - The elapsed playback time of track is displayed on

the on the TFT LCD screen.

Track Total Playback Time - The total playback time of track is displayed on the

main CD screen.

JRV9000

CD List

Touching the List icon will display the CD List Screen. The CD List Screen illustrates

the contents of a CD disc. The contents are divided into folders and various file

types. Touching the icon will display the files present on the disc.

CD List Screen

( ) Audio Files - Touch the audio file icon to display the audio file. Touch the

audio file icon to select a track. Touch the audio file icon again to confirm and

playback will begin.

( ) Video Files - Touch the video file icon to display the video file. Touch the

video file icon to select a video file. Touch the video file icon again to confirm

and playback will begin.

( ) Image Files (JPEG etc) - Touch the image icon to display a folder or

individual JPEG file. Touch the image icon to select a folder or an individual JPEG

file. In the case of a JPEG folder touch the folder icon twice and the contents of

the folder will be displayed. Touch the JPEG image icon to select and view an

individual JPEG file.

( ) Folders - Touch the icon to display the folder/file hiearchy. Touch the folder

icon twice and the contents of the folder will be displayed. Touch the file icon to

select a file. Touch the icon again to confirm and open the file.

JRV9000

Track Direct Entry

When the Direct Entry icon is touched the Direct Entry Screen appears. The

user can manually select a track by touching the corresponding number. After

entering the track numbers touch the OK icon. If a wrong digit is entered touching

the arrow will remove the number. After touching OK playback will begin.

CD Track Direct Entry Screen

Controlling Playback

Inserting a Disc - Upon inserting a CD, disc play begins. You cannot insert a disc if

there is already a disc in the unit or if the power is o.

Ejecting a Disc - Press the Eject ( ) button on the front of the unit to eject the

disc. The unit automatically reverts to Tuner mode. You may eject a disc with

the unit powered o. The unit will remain off after the disc is ejected.

Resetting the Loading Mechanism - If the disc loads abnormally or an abnormal

core mechanism operation occurs, press and hold the Eject ( ) button on the

front of the unit to reset the loading mechanism. Normal operation resumes.

Pausing Playback - Touch the Play/Pause ( ) icon to suspend or resume disc

play.

Moving Through Tracks - Touch the Next ( ) icon to advance to the next track

on the disc. Touch the Previous ( ) icon to move to the previous track.

Repeat Playback - Touch the icon to alter repeat mode according to the

following:

• CD-DA: Repeat Track > Repeat Album > Repeat O

• CD-R/RW: Repeat Track > Repeat Album > Repeat O

Random Play Select - Touch the Random ( ) icon to play the tracks on the disc

in a random, shuffled order. Touch the Random ( ) icon again to cancel Random

Play mode.

Note: CD-R and CD-RW will not play unless the recording session is finalized.

JRV9000

MP3/WMA Operation

MP3 is a format for storing digital audio. An audio CD-quality song can be

compressed into the MP3 format with very little loss of quality, while taking up

much less space. Insert a MP3 Disc into the disc slot, label side up. Playback begins

in MP3 mode when a disc is inserted correctly. The unit plays the songs in the

order they were burned on to the disc. The menu for playing audio MP3 music files

is the same as previously described for CD discs.

Media and File Requirements

This player allows you to play back MP3 and WMA files recorded onto CD-R/RWs,

DVD+R/RWs, and DVD-R/RWs. For CD-RW discs, please make sure it is formatted

using the full method and not the quick method to prevent illegal disc operation.

For the greatest file capacity, Dual Layer DVD’s can be used when burning music

to a disc.

MP3 Format Compatibility

The file naming formats listed below are compatible with this unit:

• ISO 9660 – file name: 12 characters, file extension: 3 characters

• ISO 9660 – file name: 31 characters, file extension: 3 characters

• Joliet – 64 characters

If the file or folder name does not conform to ISO 9660 file system standards, it

may not be displayed or played back correctly. Use the following settings when

compressing audio data for your MP3 disc:

• Transfer Bit Rate: 128kbps

• Sampling Frequency: 48kHz

When recording MP3 up to the maximum disc capacity, disable additional writing.

For recording on an empty disc up to maximum disc capacity, use the “Disc at

once” setting.

MP3 Playing Order

When selected for play, files and folders are accessed in the order they were

written by the CD writer. As a result, the order in which they are expected to be

played may not match the order in which they are actually played. You may be

able to set the order in which MP3/WMA files are to be played by writing them

onto a medium such as a CD-R with their file names beginning with play

sequence numbers such as “01” to “99”.

JRV9000

Controlling Playback

Inserting a Disc- Upon inserting a MP3/WMA disc, disc play begins. You cannot

insert a disc if there is already a disc in the unit or if the power is o.

Ejecting a Disc - Press the Eject ( ) button on the front of the unit to eject the disc.

The unit automatically reverts to Tuner mode. You may eject a disc with the unit

powered o. The unit will remain off after the disc is ejected.

Resetting the Loading Mechanism - If the disc loads abnormally or an abnormal

core mechanism operation occurs, press and hold the Eject ( ) button on the

front of the unit to reset the loading mechanism. Normal operation resumes.

Playing MP3/WMA Files - After inserting a MP3/WMA disc, files will play in

the sequence of the “Root’ directory.

Note: When burning MP3 / WMA files onto a DVD disc, use folders when

burning large numbers of songs / files to a disc for easy music navigation.

Select the “Disc at Once” option and close your disc.

Note: CD-R and CD-RW will not play unless the recording session is finalized.

Pausing Playback - Touch the Play/Pause ( ) icon to suspend or resume

playback.

Moving Through Tracks - Touch the Next ( ) icon to advance to the next track

Touch the Previous ( ) icon to move to the previous track on the MP3 disc.

Repeat Playback - Touch the Repeat ( ) icon to alter repeat mode as follows:

Repeat Single > Repeat Folder > Repeat All > Repeat O.

Random Play Select - Touch the Random ( ) icon to play the tracks on the

MP3 disc device in a random, shuffled order. Touch the Random ( ) icon again

to cancel Random Play mode.

JRV9000

RADIO TUNER OPERATION

From the main menu screen touch the radio icon. The radio tuner display screen

appears.

Radio Tuner TFT Display

The on-screen icons and touch key areas are outlined below.

Stereo - Displays stereo radio signal reception.

FM1 - Displays the current preset frequency band.

P1 through P6 - Displays the current preset frequency within the preset

frequency band that currently playing.

107�7 MHz - Displays the radio station frequency that is currently playing.

Radio Tuner TFT Display Screen

Source Icon - Touch to view the SOURCE MENU and select a new playback source.

Radio - Displays the current source.

Time Display - This indicator displays the time as entered by the user in the Settings

Menu.

Preset List - Provides a display of the preset frequencies. Touch to recall a preset

station. The radio can store 6 FM1, 6 FM2, 6 FM3, 6 AM1, and 6 AM2 frequency

presets.

Local / Distance - Displays the Local /Distance setting.

RT (Radio Text) - Allows a radio station to transmit a 64-character free-form text

that can be either static (such as station slogans) or in sync with the programming

(such as the title and artist of the currently playing song).

PS (Program Service) - An eight-character static display that represents the call

letters or station identity name. Most RDS capable receivers display this information.

Touch "PS" or "RT" to alternate between RT / PS / PTY feature.

JRV9000

More ( / ) - Touch the / icons to display the next or previous page of the

Disc menu.

( ) Seek Down / Manual Seek - Touch this icon to seek the previous available

radio station. Touch and hold this icon (Until "Manual Seek -" is displayed) to

manually tune the radio in increments. Default Seek Down mode is resumed

after 5 seconds of inactivity.

AS / PS - Press to preset scan through saved presets. Press and hold to

automatically search and store all strong stations.

( ) Seek Up / Manual Seek - Touch this icon to seek the next available radio

station. Touch and hold this icon (Until "Manual Seek +" is displayed) to manually

tune the radio in increments. Default Seek Up mode is resumed after 5 seconds of

inactivity.

Band - Touch to change between AM/FM bands.

Save - Touch this icon to save the currently selected frequency as a preset.

Local (LO) / Distance (DX) - Touch to select and activate local and distance

station reception. When the Local function is on, only radio stations with a

strong radio signal are tuned in.

Direct Entry - Touch this icon to the display the Direct Entry Screen.

( EQ ) Equalizer - Touch this icon to access the Equalizer Control Menu.

(See “Adjusting Equalizer Controls”)

JRV9000

PTY - The Program Type (PTY) function displays the program category of the

current station such as category (news, sports, talk etc.) Use the scroll bar to select

various categories. After selecting a category, press the down arrow icon to scan to

the next station of the selected category. Touching the Back icon returns the user

to main tuner screen.

PTY Screen

There are 27 categories in the PTY function.

1. Any 8. Adult Hits 15. Jazz 22. Personality

2. News 9. Soft Rock 16. Classic 23. Public

3. Info 10. Top 40 17. Rhythm and Blues 24. College

4. Sports 11. Country 18. Soft R&B25. Weather

5. Talk 12. Oldies 19. Language 26. Emergency Test

6. Rock 13. Soft 20. Religious Music 27. Alert

7. Classic Rock 14. Nostalgia 21. Religious Talk

JRV9000

Direct Entry Tuning

When the Direct Entry icon is touched the Direct Entry Screen appears. The user

can enter the desired radio station frequency using the on-screen number pad.

After entering the radio station frequency touch the OK icon. If a wrong digit is

entered touching the green arrow will remove the number. After touching OK the

radio will tune to the entered station. Playback will begin.

Radio Direct Entry Screen

Using Preset Stations

Six numbered preset icons store and recall stations for each band. All six stored

stations (P1 through P6) for the current band appear on the screen.

Storing a Station

1. Select a band (if needed), then tune to a desired radio station frequency.

2. Touch the on-screen Save icon. The following screen will appear.

Preset Save Screen

JRV9000

3. Touch the preset number in which you would like to store the current

station. The station frequency is displayed at the top of the menu. The preset

number will appear highlighted. The station frequency will be stored in the

highlighted preset. The station will be displayed Tuner TFT LCD screen. Station

can also be stored by touching and holding the preset icon to store the station

currently tuned as a preset.

Recalling a Station

1. Select a preset band (if needed).

2. Touch an on-screen preset icons (P1 through P6) to select the corresponding

stored station.

Preset Station Screen

Auto Store (AS)

To automatically select strong stations and store them in the current band. This

feature is most useful when travelling in an area where you are not familiar with

the local stations.

1. Select a band (if needed).

2. Touch the AS icon to activate the Auto Store function. FM Band 1,2 and 3 will

be filledif enough stations are detected. The AM Bands function in a similar

manner.As new stations are found they will replace stations already stored in

that band.

Note: If stations have already been set as favorites, activating the Auto-

Store feature will erase those stations and enter the new strong stations.

Local (LOC) / Distance (DX) Settings

When the Local function is on, only radio stations with a strong radio signal are

played. To activate the Local function in the AM/FM tuner mode, touch "More" on

the Tuner user interface (UI) screen. The Local/Distance icon is displyed. Touch

Local / Distance to turn the function ON or OFF. When the Local or Distance

function is active, the Local / Distance text in the UI is displayed.

JRV9000

The unit will read the audio/video les on USB devices automatically.

To insert a USB device:

1. Locate the Interface Cover on the front of the radio.

3.5mm A/V Cable (not included)

Video

Left Audio

Right Audio

Ground

USB Cable (not included)

2. Lift the protective cover to reveal the USB slot.

3. Insert the USB device into the USB port.

MicroSD card slot

AV AUX

USB

MUTE

JRV9000

USB Operation From the main menu screen touch the USB icon.

USB Main Menu

The on-screen icons and touch key areas are outlined below.

USB Main Menu

Source Icon - Touch this icon to return to the Main Menu Screen.

Scrolling Display - Displays current track information.

Track Number - Lists the current audio track playing and the total number of

audio tracks in audio mode. Lists the current video folder and the total number of

video folders in video mode.

Time Display - This indicator displays the time as entered by the user in the

Settings Menu.

More ( / ) - Touch the / icons to display the next or previous page of the

USB menu.

( ) Previous - Touch this icon to play the previous track.

( ) Play/Pause - Touch this icon to begin playback. Touch this icon again to

pause playback.

( ) Next - Touch this icon to play the next track.

JRV9000

List - Touch this icon to access the list of audio and video files contained on

the USB device. Touch a folder icon and the contents of the folder will be

displayed. Touch a desired track icon twice and the track will begin playing.

( ) Shuffle - Touch this icon to play audio or video tracks in a random order.

The icon will be displayed on the TFT.

( ) Repeat - In audio mode touch this icon to repeat playback of the current

audio track. The icon on the TFT will be displayed and a small letter "A" will

appear below the icon and ALL audio tracks will repeat. Touch this icon again

and the current track will repeat (Single track). The icon on the TFT will display

and small number "1" will appear below the icon. Touch the icon again and the

repeat function will be cancelled.

In video mode touch this icon during playback to repeat the current track. The

icon on the TFT will display and small number "1" will appear below the icon and

the track will repeat. Touch the icon again to repeat all the tracks. The icon on

the TFT will display and a small letter "A" will appear below the icon and all the

tracks will repeat. Touch the icon again the repeat function will be cancelled.

( EQ ) Equalizer - Touch this icon to access the Equalizer Control Menu.

(See “Adjusting Equalizer Controls”)

Direct Entry - Touch this icon to the display the Direct Entry Screen.

JRV9000

USB List

Touching the "List" icon will display the USB List Screen. The USB List Screen

displays the audio and video files present on the USB device. The contents are

divided into folders and various file types. The file types consist of audio and video

files. Touching the folder icon will display the files present in the folder.

USB List Screen

( ) Audio Files - Touch the audio file icon to display the audio file. Touch the

audio file icon to select a track. Touch the audio file icon again to confirm and

playback will begin.

( ) Video Files - Touch the video file icon to display the video file. Touch the

video file icon to select a video file. Touch the video file icon again to confirm

and playback will begin.

( ) Folders - Touch the icon to display the folder/file hiearchy. Touch the folder

icon and the contents of the folder will be displayed. Touch the file icon to select

a file. Touch the icon again to confirm and open the file.

( ) Image Files (JPEG etc) - Touch the image icon to display the image file.

Touch the image file icon to select an image file. Touch the image file icon

again to confirm and view the image.

JRV9000

Direct Entry

When the Direct Entry icon is touched the Direct Entry Screen appears. The user

can manually select a track by touching the corresponding number. After

entering the track numbers touch the OK icon. If a wrong digit is entered use the

arrow/backspace key to remove the number. After touching "OK" playback will

begin.

USB Track Direct Entry Screen

Moving Through Tracks

Touch the Next ( ) icon to advance to the next track on the USB device.

Touch the Previous ( ) icon to move to the previous track on the USB device.

Pausing Playback

Touch the Play/Pause ( ) icon to suspend or resume playback.

PIC - When the PIC icon is touched the "Picture Adjust" screen appears. Touch

this icon during playback to adjust the brightness, contrast, saturation and hue.

These levels can be adjusted to suit user preferences. The adjustments are

accomplished by touching the + or - icons to decrease or increase the desired

setting. The settings have range of 1 to 20.

USB Picture Adjust Screen

Note: The Picture Adjustment Screen will turn OFF automatically if no

adjustment is made within five seconds or if any other part of the screen is

touched.

JRV9000

iPod® / iPhone® Controls

Accessing iPod® Mode

The user can control an iPod®/iPhone® using the touch screen to access,

albums, songs, etc.

The unit will automatically switch to iPod® mode when an iPod®nano, iPod®

touch or iPhone® is plugged into the front panel USB connector. Also the iPod®

can be accessed from the Main Menu Screen by touching the iPod® icon (only

available when an iPod® or iPhone® is connected to the front panel USB

connector).

iPod® / iPhone® Main Menu

The on-screen icons and touch key areas are outlined below.

iPod®/iPhone® Main Menu

Source Icon - Touch this icon to return to the Main Menu Screen.

iPod - Displays the current source.

Track Number - Lists the current audio track playing and the total number of

audio tracks in audio mode. Lists the current video folder and the total number of

video folders in video mode.

Time Display - This indicator displays the time as entered by the user in the

Settings Menu.

More ( / ) - Touch the / icons to display the next or previous page of the

iPod® menu.

JRV9000

( ) Previous - Touch this icon to play the previous track.

( ) Play/Pause - Touch this icon to begin playback. Touch this icon again to

pause playback.

( ) Next - Touch this icon to play the next track.

List - Touch this icon to access the list of audio and video les contained on the

iPod®. Touch a folder icon and the contents of the folder will be displayed. Touch a

desired track icon twice and the track will begin playing.

( ) Shue - Touch this icon to play audio or video tracks in a random order.

The icon will light on the main TFT LCD screen.

( ) Repeat - In audio mode touch this icon to repeat playback of the current

audio track. The icon on the TFT will display and a small letter "A" will appear

below the icon and the all the audio tracks will repeat. Touch this icon again

and single track will repeat. The icon on the TFT will display and small number

"1" will appear below the icon. Touch the icon again the repeat function will be

cancelled. The icon on the main TFT LCD screen will dim and playback of the

remainder of the tracks will resume.

( EQ ) Equalizer - Touch this icon to access the Equalizer Control Menu.

(See “Adjusting Equalizer Controls”)

iPod® List

Touching the List icon will display the iPod® List Screen. The iPod® List Screen

illustrates the audio and video les present in the iPod®. The contents are

divided into folders and various le types. The le types consist of audio and

video le. Touching the folder icon will display the les present in the folder.

iPod®/iPhone® List Screen

JRV9000

( ) Audio Files - Touch the audio file icon to display the audio file. Touch the

audio file icon to select a track. Touch the audio file icon again to confirm and

playback will begin.

( ) Video Files - Touch the video file icon to display the video file. Touch the

video file icon to select a video file. Touch the video file icon again to confirm

and playback will begin.

( ) Image Files (JPEG etc) - Image files are selected and controlled by the

iPod®.

( ) Folders - Touch the icon to display the folder/file hiearchy. Touch the folder

icon and the contents of the folder will be displayed. Touch the file icon to select

a file. Touch the icon again to confirm and open the file.

Moving Through Tracks

Touch the Next ( ) icon to advance to the next track on the iPod®.

Touch the Previous ( ) icon to move to the previous track on the iPod®.

Pausing Playback

Touch the Play/Pause ( ) icon to suspend or resume playback.

JRV9000

AV In 1 / AV In 2

AV In 1

AV In 1 is used for playback of audio/video from an external device connected to

the unit through a 3.5mm jack located on the front panel. The unit can increase

or decrease the volume of the connected device. All other controls are done on

the connected device.

AV In 1 Screen (No Signal)

AV In 2

AV In 2 is used for playback of audio/video from an external device connected

through RCA connectors located on the back of the unit. The unit can increase or

decrease the volume of the connected device. All other controls are done on the

connected device.

AV In 2 Screen (No Signal)

NOTE: Audio/Video devices must be connected to this unit using an audio/

video adapter cable that is available separately.

NOTE: Video will only play when the vehicle parking brake is engaged. The

parking brake wire must be connected for this feature to operate.

Connecting External Devices

JRV9000

Using a Smartphone via HDMI/MHL

What is HDMI/MHL? HDMI (High Definition Multimedia Interface) is a digital

interface for audio and video sources. HDMI is a digital replacement for analog

video standards.

Mobile High-Definition Link (MHL) is an industry standard for a mobile audio

video interface that allows consumers to connect mobile phones, tablets, and

other portable consumer electronics (CE) devices to high-definition televisions

(HDTVs) and mobile multimedia receivers.

HDMI/MHL allows you to use the multimedia TFT touch screen to control your

mobile device.

Note: It may not be legal to view apps on a smartphone while driving or

controlling a vehicle. It is the drivers responsibility to obey local and federal

laws while driving or controlling a vehicle.

Interfacing your Smartphone - Android

Depending on your model and brand of smartphone HDMI / MHL may not be

supported. Check your smartphone documentation for supported features.

Note: In order to connect your smartphone to your JRV9000, you will need

an HDMI/MHL adapter for your particular brand of smartphone. In some

cases, you may need to connect the additional micro USB port (On the

adapter itself) to a power source in order for the HDMI/MHL adapter to

function properly.

Smartphone HDMI/MHL adapters are available at your local mobile phone

retailer. For example, if you have a Samsung S3/S4 or Note 2, you would buy the

below HDMI/MHL adapter:

Samsung ET-H10FAUWESTA Micro USB to HDMI

1080P HDTV Adapter Cable

For Samsung Galaxy S3/S4 and Note 2

Smartphone brands are usually only compatible with the same brand of HDMI /

MHL adapter.

Android smartphones will require an app that must be downloaded from Google

Play Store. Search for "Jensen HDMI/MHL Connect" in the search bar.

JRV9000

Mirror Mode (HDMI/MHL Adapter Required)

Mirror Mode allows the image from the smartphone to be displayed on the

larger head unit TFT. There is no touch screen control from the head unit TFT.

You must control the apps from the smartphone.

Mirror Mode w/ Touch Screen Control (HDMI/MHL

Adapter Required)

Mirror Mode w/ Touch Screen Control allows the image from the smartphone to

be displayed on the larger head unit TFT as well as full touch screen control of

the smartphone screen from the head unit.

Note: All apps may not be supported / displayed when connected via HDMI/

MHL.

General

1. Some devices (smartphones) may not be compatible with HDMI/MHL

connectivity.

2. Incoming calls or messages may pause media output. Media will resume

after the call or message.

3. Simultaneously running multiple apps on your smartphone while screen

sharing places heavy demand on the smartphone, potentially affecting its

performance. Close unused apps on your smartphone to enhance the screen

sharing feature of the JRV9000.

Interfacing your Smartphone - iPhone 6® / iPhone 6

Plus® / iPhone 5® / iPhone 5S® / iPhone 5C® / iPod

touch® (5th Gen) / iPod nano® (7th Gen)

Note: In order to connect your smartphone to your JRV9000, you will need

the "Apple Lightning Digital AV Adapter" (HDMI/MHL adapter). No app or

software is needed for Apple devices.

Smartphone HDMI/MHL adapters are available at your local mobile phone

retailer.

4. If you are having trouble seeing your smartphone display on the head unit TFT,

try connecting your smartphone (With HDMI/MHL adapter) to another device

such as a flat panel TV with HDMI input. If you cannot see the smartphone

display on the flat panel TV, the smartphone does not support HDMI/MHL.

3. Connect Your Smartphone

Most Android smartphones will require an HDMI/MHL adapter in addition to an

HDMI cable with 2 Type A male connectors. These adapters are available at

smartphone retail stores. See head unit documentation for more information

about HDMI/MHL adapters. Connect your smartphone to the HDMI/MHL

adapter. Connect one end of the HDMI cable to the HDMI/MHL adapter. Connect

the remaining end of the HDMI cable to the Jensen multimedia head unit HDMI

input (Rear chassis panel). Consult your smartphone documentation for

instructions on how to access HDMI/MHL on your device.

4. Touch Screen Calibration Start

Launch the HDMI/MHL Connect app on your smartphone. Using the head unit

touch screen, go to Settings in the HDMI/MHL Connect app. Scroll down slightly,

and press the Touch Screen Calibration "Start" button.

5. Touch Screen Calibration

Once the touch screen is calibrated, scroll up, and press System Settings to

return to the main HDMI/MHL Connect page. Press Mobile Home Page to access

your smartphone from the touch screen of the Jensen multimedia head unit.

Touch the Car Home Page to return to the Main Source Menu of the head unit.

This calibration is performed once per phone when initially set-up.

JRV9000

Connecting Your Smartphone to the JRV9000

1. Jensen HDMI/MHL Connect App Installation Procedure

Download and install the Jensen HDMI/MHL Connect app from Google Play

onto your smartphone.

2. Smartphone / Head Unit BT Connection

In order to have full touch screen control from the head unit TFT (via the HDMI/

MHL Connect app), a BT connection is required between your smartphone and

head unit. Refer to the head unit / smartphone documentation for further

information on pairing / connecting devices.

JRV9000

BT OPERATION

Please make sure your mobile phone supports BT. (Headset or Handsfree

profiles or both and A2DP). Adhere to the following guidelines for successful

operation.

• Before using BT functions, you must pair your mobile phone to the JRV9000

unit (see “Pairing the Your Mobile Phone with the Unit”. To ensure

the best reception for pairing and re-connection, please make sure the

mobile phone battery is fully charged before you begin.

• Try to perform pairing within a few minutes of the mobile phone being turned

on.

• Once the unit has been paired with the mobile phone, the unit’s model number,

“JRV9000”, will be displayed on the mobile phone.

• To achieve the best performance, always keep the mobile phone within 10 feet

(3 meters) of the unit.

• Always keep a clear path between the mobile phone and the unit. Never place a

metal object or any other obstacle between the mobile phone and the unit.

• Some mobile phones may have a “Power Saving Mode” option. PLEASE DO NOT

use the power saving mode with the JRV9000.

• Before accepting or making a call, make sure your mobile phone’s “BT

function” is turned on.

• To ensure the best conversation quality/performance, stay within 3 feet

(1 meter) of the unit’s microphone when talking.

• To manually disconnect the mobile phone from the unit, touch the “Chain Link”

icon on the BT user interface (next to the mobile phone name) and the BT

device will be “disconnected”, but still paired.

NOTE: The line-of-sight distance between this unit and your mobile phone

must be 8 feet (2.4 meters) or less for sending and receiving voice and data

via BT wireless technology.

JRV9000

BT User Interface

The on-screen icons and information for BT functions are outlined below.

SRC Icon - Touch this icon to return to the Main Menu Screen.

BT - Displays the current source.

Device Name - Indicates the device that is paired with the unit.

( ) - Indicates whether the unit is connected with a BT device. Touch to

connect to a BT device.

( ) - Touch to disconnect from a BT device.

JRV9000 Device Name - Provides the name that will appear on the

BT device.

Scan - Touch the icon to search for BT devices

. Options - Touch to display the BT Options page.

JRV9000

1. Touch the MENU on the front panel to access the source menu.

2. Touch the BT icon on the source menu and the BT user interface

screen will appear.

3. Touch the Options icon and the following screen will appear.

4. On the Options submenu set the BT function to ON.

5. On the Options submenu set the Auto Connect function to ON.

6. Set the mobile phone BT discover mode to ON.

Note: Some discovery modes have a time limit, usually a minute, before

they are automatically turned OFF.

7. Touch the “Scan” icon on the unit’s BT user interface screen. Available

devices will appear with the “Pair” icon next to it.

The user can make or receive phone calls with BT enabled phones through the

unit. The user can also listen to music from a BT enabled device.

Pairing BT Devices

To connect your BT phone to the unit, the user needs to pair the phone to the unit.

Pairing only needs to be done once per phone. The user can pair up to five (5)

phones. Use your mobile phone to begin the BT pairing process.

8. Touch the “Pair” icon on the unit’s BT user interface screen.

9. A prompt to pair or bond should appear on your mobile phone. Accept the

request and initiate the process.

NOTE: Some mobile phones require a “pass key” or pairing code to

connect. If your phone requires a pass key or pairing code, you will

need to enter this number. The default pairing code for the JRV9000 is

"1234".

10. A prompt to enter a PIN number or passkey for the unit should appear. The

default passkey for the unit is “1234”.

11. At this point a prompt stating pairing successful should appear. Another

prompt should appear asking connect to the unit, Yes or NO. Touch Yes. The

mobile phone and the unit should connect. The mobile phone should display

a message similar to “Device Connected” and the mobile phone and the unit

are now connected. JRV9000 will appear on the mobile phone list of devices.

JRV9000

Managing Incoming Calls

When connected to a BT mobile phone, the unit will mute audio output, pause CD

play, and change to the BTscreen below when a call is received. The incoming

phone number or assigned name for that number will appear on the screen. An

audible tone will sound from the unit and a graphic display will appear on the

front panel.

BT Incoming Call Screen

icon: Touch to answer an incoming call.

2. icon: Touch to end an incoming call.

Making an Outgoing Call

Outgoing calls can be performed in two manners. The outgoing call can be direct

dialed using the front panel keypad or the by touching either the Phonebook or

Call History icons, selecting a name and touching the phone number.

Select BT function (Handset icon) from the BT Home Menu.

Press "Option". Go to > "Phone Sync". Press "Sync" to import the mobile

phone contacts. If you have many contacts, this may take up to 4-5 minutes

initially. Up to 2000 contacts can be imported.

Phonebook Sync / Importing Contacts / Call History

JRV9000

Direct Dialing:

1. Press the front panel MENU button and then touch the BT icon to access

the BT main menu. The following screen will appear:

BT Direct Dial Screen

2. Use the 0-9, */+, and # icons to input the phone number. If necessary touch the

green arrow icon to clear the last digit or the entire number and start over.

3. After entering the phone number, touch the

icon to dial the call. The

number dialed will be displayed on the screen.

4. To end the call, touch the icon.

Answering an Incoming Call

To answer an incoming call touch the

icon. For best reception, speak loudly and

clearly into the units microphone. To end the conversation, touch the icon.

Rejecting an Incoming Call

Touch the Transfer to Phone icon to reject an incoming call. The call will revert to

your mobile phone and be left for voice mail.

Volume Control

To increase or decrease the volume level of an incoming call, turn the rotary knob

on the front panel or press the VOL+/ VOL- icons on the remote control.

JRV9000

Audio Mute

To mute the phone call audio from the unit when a call is received, press the front

panel rotary knob. Press the front panel rotary knob again and phone call audio

will be restored to the unit.

Call Log

The call log consists of dialed numbers, received calls and missed calls.

Note:

Not all mobile phones allow access to missed, received or dialed calls and

some will not allow uploading of your mobile phone's address book.

BT Call Log Screen

Missed Calls - The Missed Calls List retrieves the list of missed numbers from your

mobile phone if your mobile phone allows the function. The last missed number is

the first number on the list. Touch the Missed Calls menu option to view the list. To

make a call from the Missed Calls list, touch the call’s name. Touch the phone

number and it will be dialed.

Received Calls - The Received Calls list retrieves the received numbers stored on

your mobile phone if your mobile phone allows the function. To access the

Received list, touch the Received Calls menu option. The last received number is

the first number on the list. To make a call from the Received Calls list, touch the

name. A new screen will appear with the name on the top and the phone number

below. Touch the phone number and it will be dialed.

Dialed Calls - The Dialed Calls list retrieves the list of dialed numbers from your

mobile phone if your mobile phone allows the function. The last dialed number is

the first number on the list. Touch the Dialed Calls menu option to view the list. To

make a call from the Dialed Calls list, touch the name. A new screen will appear

with the name on the top and the phone number below. Touch the phone

number and it will be dialed.

JRV9000

Call Transfer

While talking, to transfer audio from the unit back to the mobile phone, touch the

To Phone icon. You can only transfer a call after it has been answered.

Touching the To Device icon will return the audio from the mobile phone to the

unit. Touch the Transfer Call icon and the following screen will appear:

Transfer to Phone Screen Transfer to Radio Screen

Call Transfer Screens

BT Audio Control Screen

BT Music Function

BT provides A2DP (Advanced Audio Distribution Profile) profile for streaming

music from a mobile phone or a portable multimedia player (PMP), sometimes

referred to as a MP3 player. The unit allows you to play back audio files from your

mobile phone using a BT connection.

Note: Please quit A2DP mode before attempting to make a phone call, as

unexpected results may occur depending on your mobile phone model.

The unit can control a BT audio player via AVRCP (Audio/Video Remote Control

Profile). BT audio players compatible with these profiles can be connected to this

unit. The following screen is used for streaming music:

JRV9000

While listening to audio the following functions are available:

1. Pause/Play ( ) icon: Touch to pause playback. Touch again to resume

playback.

2. Previous ( ) icon: Touch to play the previous track.

3. Next ( ) icon: Touch to play the next track.

Functionality varies depending on the profile used:

•A2DP: Stream audio from your BT compatible audio player and listen to

the music through the unit.

• AVRCP: Play back, pause, select songs, etc. while streaming audio from your

BT compatible audio player to the unit.

Note: Song information (e.g. elapsed playing time, song title, song index, etc.)

cannot be displayed on this unit. Since there are a number of BT audio players

available on the market, operations with your BT audio player while using

this unit may vary greatly. Please refer to the instruction manual that came

with your BT audio player.

When there is an incoming call, the song will be paused. After the incoming

call is finished, the screen will return to the music function screen and playback

will continue.

BT Call While Navigating

When navigating and a BT call comes in, the user interface (UI) will

automatically switch to the BT UI. To return to the navigation UI while the call

is still in progress, press and hold the MENU button. The navigation UI will

display and navigation voice prompts will be overidden by the phone call.

When the call has ended, navigation voice prompts will return automatically.

Switching Between Sources While Navigating

Press the MENU button to go back to the Main Source Menu. This will allow you

to select another source (Radio, Disc, AV 1, etc). Press and hold the MENU

button to switch back and forth between the currently selected source and

navigation.

PTT (Push to Talk) Function

The JRV9000 has a PTT button to allow you to access Siri or Google Voice through

the head unit when connected via BT. You mobile phone must support Siri or

Google Voice in order for this feature to be supported on the head unit.

NOTE: Samsung "S" Voice and other third-party apps may not be supported.

JRV9000

CAMERA OPERATION

Enter Camera Mode

Connect the cameras to the unit using the CAMERA 1-3 Connection cables at the

back of the unit. Enter 2nd page of main menu, press CAMERA to access camera

mode.

This unit can connect 3 cameras:CAM1, CAM2 and CAM3. Each camera can be triggered

back of the unit. If trigger signals are detected on more than one trigger wire, the

the triggered channel video will be displayed on the full screen, Only CAM 1 has

audio input.

Auto Mic Enable

When the Auto Mic Enable feature is set to “Yes”, the current playback audio will be

muted and the microphone for camera 1 will be automatically turned on when the

vehicle is placed in reverse gear. See "Camera Conguration":

Setting Options Function

Camera 1 mode

Camera 2 mode

Camera 3 mode

Priority Order

Trigger Delay

Auto Mic Enable

Skip

Normal (default)

Mirror

Skip

Normal (default)

Mirror

Skip

Normal (default)

Mirror

1-2-3

1-3-2

2-1-3

2-3-1

3-1-2

3-2-1

One Second

Two Seconds

Three Seconds

Four Seconds

Five Seconds

Six Seconds

Yes

The output of camera 1 image is skipped.

The output of camera 1 image is in normal mode.

The output of camera 1 image is in mirror mode.

The output of camera 2 image is skipped.

The output of camera 2 image is in normal mode.

The output of camera 2 image is in mirror mode.

The output of camera 3 image is skipped.

The output of camera 3 image is in normal mode.

The output of camera 3 image is in mirror mode.

Continue pressing to select the desired camera

trigger priority from 1(highest) to 3 (lowest).

Set delay time for displaying camera image after

trigger signal is removed.

Select “Yes” to automatically turn on the microphone

and mute other audio when the vehicle is in reverse gear.

Audio Output and Volume Adjustment

In camera mode, if Camera 1 is not triggered, the front audio output will be the

from the last audio source played. Rotate the VOL control (1) to adjust the volume

of the audio source. When Camera 1 is triggered and the Auto Mic Enable feature

is on, the camera 1 video appears on the entire screen and the audio input from

the camera is played. In this case, rotate the VOL control (1) to adjust the volume

when Camera 1 is triggered.

NOTE: The upper area of the screen is the current playback information

bar area. Press the top of the screen to remove the bar or make the bar

reappear.

Camera Control Options

Touch the lower part of the screen to make the camera controls appear.

. Touch the “CAM 1” Button to view the Camera 1 video in full screen.

. Touch the “CAM 2” Button to view the Camera 2 video in full screen.

. Touch the “CAM 3” Button to view the Camera 3 video in full screen.

. Touch the “AUDIO” Button to turn the Camera audio ON/OFF.

. Touch the Button on the screen to change Brightness, Contrast, Saturation

and Hue settings. Use the +/- buttons to

adjust each setting from 0-10.

JRV9000

adjust each setting from 0 -20.

JRV9000

SWC Ready

The built-in SWC Interface is compatible with PAC steering wheel control

modules. The PAC SWI-RC is recommended.

A third-party adapter must be used in order for the JRV9000 to be compatible

with any steering wheel controls.

The following controls are available for most vehicles:

1. Volume

Up (+)

4. Seek /

Track +

7. Preset (+) 10. BT Send

2. Volume

Down (-)

5. 8. Preset (-) 11. BT End

3. Mute 6. Source Band9. 12.PTT

Note:

Not all OE steering wheel functions may be supported by the JRV9000. PTT -

Will activate Siri / Google Voice if mobile phone supports the feature. Not

compatible with all phones/vehicles.

PAC SWI-RC Installation Hints

1.. Set "Radio Select Switch". Set the SWI-RC to position 7 - "Pioneer/Other/Sony".

2.. Programming - Use the Pioneer/Sony/Other radio function mapping order for

Jensen branded head units.

3.. When programming the SWI-RC, if a function is not supported (or not desired),

then the function MUST be skipped as per the PAC SWI-RC instructions.

4.. The SWC function MUST be programmed in the correct order per the PAC

SWI-RC radio function mapping order instructions.

Seek /

Track -

JRV9000

SiriusXM® RADIO OPERATION

Only SiriusXM® brings you more of what you love to listen to, all in one place.

Get over 140 channels, including commercial-free music plus the best sports,

news, talk, comedy and entertainment. Welcome to the world of satellite radio. A

SiriusXM Vehicle Tuner and Subscription are required. For more information, visit

www.siriusxm.com.

Activating SiriusXM® Radio

After installing your SiriusXM Connect Vehicle Tuner and antenna, power on your

radio and select SiriusXM mode. You should be able to hear the SiriusXM preview

channel on Channel 1.

After you can hear the Preview channel, tune to Channel 0 to find the radio ID of

your tuner.

Note: The SiriusXM Radio ID does not include the letters I, O, S or F.

In the USA, you can activate online or by calling SiriusXM Listener care:

• Visit www.siriusxm.com/activatenow

• Call SiriusXM Listener Care at 1-866-635-2349

For Canadian Subscriptions, please contact:

• Visit www.siriusxm.ca/help/activation-help/

• Call XM customer Care at 1-877-438-9677

Activation typically takes 10-15 minutes, but may take up to one hour. It is

recommended to leave your vehicle on until the “Subscription Updated” message

appears.

JRV9000

SiriusXM® User Interface

The on-screen indicators and touch key areas for SiriusXM® functions are outlined

below.

Page 1

SiriusXM® Menu Page 1

Source Icon - Touch to return to the unit’s Main Menu Screen.

Band indicator (SXM1 icon) - Displays SiriusXM® radio band currently selected.

Three bands are available: SXM1, SXM2, and SXM3.

Time Display - This indicator displays the time as entered by the user in the

Settings Menu.

Signal Strength Indicator - As the strength of the satellite radio signal

increases, the number of illuminated segments will increase.

Program Information:

Channel Number - Channel numbers are used to designate the channel along with

the channel name and are useful for identifying/loading a channel via the “direct

entry” method.

Channel Name - The channel name is used to identify the channel and is usually

related to that channel’s musical content.

Category Name - A category may contain one or more channels grouped by their

ASA Electronics JRV9000 Car Multimedia Player User Manual

ASA Electronics Shenzhen Limited Car Multimedia Player

User Manual

Navigation menu

Namespaces

Views

Navigation