ASAP Technology LACA073 Wireless Charger User Manual

ASAP Technology(Jiangxi) Co., Ltd. Wireless Charger

User Manual

Micro USB inputLED indicatorHow to Charge Your Devices 1, Insert the USB end of cable into power adaptor, and connect Micro-USB end of the cable with the wireless charger, the blue LED indicator lights up aer it is connected well.Cauon2, Put your mobile phone on the wireless charging pad and ensure its center aligns with the center of wireless charger.Note: Using an ultra-thick protecve phone case (≥5mm) or a case with a magnec/iron is not recommended as it may affect the wireless charging funcon. • Avoid dropping.• Do not disassemble.• No metal object between devices and wireless charging pad.• Keep wireless charging pad away from any liquids or moisture. • The maximum ambient temperature during use of this product must not exceed 45°C. Do not place device in fire or other excessively hot environments. • Only use dry cloth or brush to clean this product. • Do not use if visible defects are observed on the wireless charging pad. • This new charger supports 5W and 10W modes on Android phones.• Experience wireless charging using the Qi wireless standard, which delivers up to 7.5W to your iPhone.• Leverages quick-charging speeds with up to 10W of power for newer Samsung flagship phone.Fast Wireless Charging• Consult the dealer or an experienced radio/TV technician for helpNote: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modificaons to this equipment. Such modificaons could void the user s authority to operate this equipment. Changes or modificaons not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The distance between user and products should be no less than 20cm.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protecon against harmful interference in a residenal installaon. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instrucons, may cause harmful interference to radio communicaons. However, there is no guarantee that interference will not occur in a parcular installaon. If this equipment does cause harmful interference to radio or television recepon, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna • Increase the separaon between the equipment and receiver• Connect the equipment into an outlet on a circuit different from that to which the receiver is connectedAny changes or modificaons not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.This device complies with Part 15 of the FCC RulesOperaon is subject to the following two condions(1) This device may not cause harmful interference, and(2) This device must accept any interference received including interference that may cause undesired operaonFCC StatementsWarningWireless Charging Pad LED Indicator/Status • Wireless Charging Pad• A 3/914mm Micro-USB cable• A 18W AC QC Adaptor• Wireless Charging PadSpecificaonsWhat is included?9 9 . 1 0 m m1 3 9 . 6 1 mm

Navigation menu