ASAP Technology LACA073 Wireless Charger User Manual
ASAP Technology(Jiangxi) Co., Ltd. Wireless Charger
User Manual
Micro USB input
LED indicator
How to Charge Your Devices
1, Insert the USB end of cable into power adaptor,
and connect Micro-USB end of the cable with the
wireless charger, the blue LED indicator lights up
aer it is connected well.
Cauon
2, Put your mobile phone on the wireless charging
pad and ensure its center aligns with the center of
wireless charger.
Note: Using an ultra-thick protecve phone case (≥
5mm) or a case with a magnec/iron is not
recommended as it may affect the wireless
charging funcon.
• Avoid dropping.
• Do not disassemble.
• No metal object between devices and wireless
charging pad.
• Keep wireless charging pad away from any
liquids or moisture.
• The maximum ambient temperature during use
of this product must not exceed 45°C. Do not
place device in fire or other excessively hot
environments.
• Only use dry cloth or brush to clean this
product.
• Do not use if visible defects are observed on the
wireless charging pad.
• This new charger supports 5W and 10W modes
on Android phones.
• Experience wireless charging using the Qi
wireless standard, which delivers up to 7.5W to
your iPhone.
• Leverages quick-charging speeds with up to
10W of power for newer Samsung flagship phone.
Fast Wireless Charging
• Consult the dealer or an experienced radio/TV
technician for help
Note: The manufacturer is not responsible for any
radio or TV interference caused by unauthorized
modificaons to this equipment. Such
modificaons could void the user s authority to
operate this equipment. Changes or modificaons
not expressly approved by the party responsible
for compliance could void the user's authority to
operate the equipment. The distance between
user and products should be no less than 20cm.
NOTE: This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protecon against harmful interference in a
residenal installaon. This equipment generates
uses and can radiate radio frequency energy and,
if not installed and used in accordance with the
instrucons, may cause harmful interference to
radio communicaons. However, there is no
guarantee that interference will not occur in a
parcular installaon. If this equipment does
cause harmful interference to radio or television
recepon, which can be determined by turning
the equipment off and on, the user is encouraged
to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separaon between the
equipment and receiver
• Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected
Any changes or modificaons not expressly
approved by the party responsible for compliance
could void the user's authority to operate this
equipment.
This device complies with Part 15 of the FCC Rules
Operaon is subject to the following two
condions
(1) This device may not cause harmful
interference, and
(2) This device must accept any interference
received including interference that may cause
undesired operaon
FCC Statements
Warning
Wireless Charging Pad LED Indicator/Status
• Wireless Charging Pad
• A 3/914mm Micro-USB cable
• A 18W AC QC Adaptor
• Wireless Charging Pad
Specificaons
What is included?
9 9 . 1 0 m m
1 3 9 . 6 1 mm