ASOKA USA PL8660-ETH PLUGLAN 8660 SMARTBRIDGE AV ETHERNET ADAPTER User Manual PL8660 ETH 20100514 new

ASOKA USA Corporation PLUGLAN 8660 SMARTBRIDGE AV ETHERNET ADAPTER PL8660 ETH 20100514 new

Users Manual

PlugLAN 8660 SmartBridge AV Ethernet Adapter User’s Guide PL8660-ETH QUICKFIND LOCATOR Contact Information Getting Help Table of Contents About This Guide Getting Started Installing the SmartBrid Configuring the SmartBridge 66-0350-00 Rev.001
PlugLAN 8660 SmartBridge AV EthernetAdapter User's Guide © 2010 Asoka USA Corporation ALL RIGHTS RESERVED Notice: No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or stored in a database or retrieval system for any purpose without the express written permission of Asoka USA Corporation. Asoka USA Corporation reserves the right to make changes to this user’s guide at any time without notice and assumes no responsibility for its use. Asoka USA products and services can only be ordered under the terms and conditions of Asoka USA Corporation's applicable agreements. All of the features described in this user’s guide may not be currently available. Refer to the most recent product announcement for information about feature and product availability. This user’s guide contains the most current information available at the time of publication. When new and/ or revised information becomes available, this entire user’s guide is updated and distributed to all registered users. Asoka, PlugLAN, and the Asoka logo are registered trademarks or trademarks of Asoka USA Corporation. All company and product names mentioned herein are trademarks of their respective companies. Mention of third-party products is for informational purposes only and constitutes neither an endorsement nor a recommendation. Asoka USA Corporation assumes no responsibility with regard to the performance or use of these products. Revision Date Description 66-0350-00 Rev.001 May 2010 Preliminary Release Changes in This Revision • Not applicable (preliminary release) ii
PlugLAN 8660 SmartBridge Ethernet Adapter User's Guide Contact Information For more information about the PlugLAN 8660 SmartBridge AV Ethernet Adapter or any of Asoka’s other leading-edge solutions, please contact us using any of the following methods: • Voice calls: We welcome your calls Monday through Friday, from 9:00 am to 6:00 pm Pacific Time at (408) 550-8167. Voice mail is available during non-business hours. • Email: If you prefer, you can send information requests to our e-mail address: sales@asokausa.com. • Fax calls: You can also send your requests for information to our 24-hour fax number: (408) 884-2390. • Web site: Our Web site contains valuable information about our products, solutions, and services. We encourage you to visit us at http://www.asokausa.com. Getting Help Asoka USA backs its products with unparalleled customer service and technical support for our valued customers. Customer Service Customer service, the customer-satisfaction arm of Asoka USA, is available Monday through Friday, from 9:00 am to 5:00 pm Pacific Time, by calling (408) 550-8167 or through email at custserv@asokausa.com. Technical Support Technical support is available Monday through Friday, from 6:00 am to 6:00 pm Pacific Time, by calling (408) 550-8173 or through email at support@asokausa.com. Please provide the following information about the problem: • Product name, model number, part number (if applicable) and serial number • System configuration, including a description of the devices connected to your PlugLAN 8660 SmartBridge • The circumstances surrounding the error or failure • A detailed description of the problem and what has been done to try to solve it iii
Relat The entwww.a The fol b Gener • Plughttp • Plughttp • Plug http Gatew • Plug http • Plughttp Smart • Plug http • Plughttp Gatew • Plug http • Plughttp iv ted Doctire documsokausa.colowing docNOTE: Albe availableal PlugLAgLAN Site Sp://www.agLAN Familp://www.agLAN Troubp://www.away documgLAN 8960 p://www.agLAN 8960 p://www.atClip InjecgLAN 1300 p://www.agLAN 1300 p://www.away ExpangLAN 1350 p://www.agLAN 1350 p://www.aPlugLANcumentmentation seom. cuments col documente at the samAN documSurvey Quessokausa.coly Overviewsokausa.cobleshootingsokausa.comentationGateway Qsokausa.coGateway Insokausa.coction Kit dSmartClip sokausa.coSmartClip sokausa.consion AdaGateway Esokausa.coGateway Esokausa.coN 8660 Smarttationet for Asokmpose the tation mightme URLs spementationstionnaire om/supporw om/supporg Guide om/supporn Quick Start om/suppornstallation om/suppordocumentInjection Kom/supporInjection Kom/supporapter docuExpansion Aom/supporExpansion Aom/supportBridge AV Etka’s MDU so Asoka MDUt be upgradecified in thrt/pluglan_rt/pluglan_rt/pluglan_ Guide rt/pluglan_ and User’srt/pluglan_tation Kit Quick Strt/smartclipKit Installatrt/smartclipumentatioAdapter Quirt/pluglan_Adapter Instrt/pluglan_thernet Adaplutions canU documended over timhis guide. _survey.pd_overview._troublesho_gateway_q Guide _gateway_gtart Guide p_qsg.pdf tion and Usp_guide.pdon ick Start G_1350_qsgtallation an_1350_guidpter User's Gun be accesstation set. me. All upgrf pdf ooting.pdf qsg.pdf guide.pdf er's Guide df uide .pdf nd User's Gde.pdf uide sed at: http raded docum uide p:// mentation wwill
PlugLAN 8660 SmartBridge Ethernet Adapter User's Guide Customer Premises Equipment documentation • PlugLAN 8660 SmartBridge AV Ethernet Adapter Ethernet Adapter User's Guide http://www.asokausa.com/support/pluglan_8660_guide.pdf • PlugLAN 8660 SmartBridge AV Ethernet Adapter Ethernet Adapter Quick Start Guide http://www.asokausa.com/support/pluglan_8660_qsg.pdf • PlugLAN 8550 Wireless SmartPoint Access Point / Ethernet Adapter User's Guide http://www.asokausa.com/support/pluglan_8550_guide.pdf • PlugLAN 8550 Wireless SmartPoint Access Point / Ethernet Adapter Quick Start Guide http://www.asokausa.com/support/pluglan_8550_qsg.pdf • PlugLAN 8250 SmarTAP Ethernet Adapter User’s Guide http://www.asokausa.com/support/pluglan_8250_guide.pdf • PlugLAN 8250 SmarTAP Ethernet Adapter Quick Start Guide http://www.asokausa.com/support/pluglan_8250_qsg.pdf • PlugLAN 8350 Wireless SmarTAP Access Point / Ethernet Adapter User's Guide http://www.asokausa.com/support/pluglan_8350_guide.pdf • PlugLAN 8350 Wireless SmarTAP Access Point / Ethernet Adapter Quick Start Guide http://www.asokausa.com/support/pluglan_8350_qsg.pdf v
PlugLAN 8660 SmartBridge AV Ethernet Adapter User’s Guide Table of Contents 1 Simple Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 How the PlugLAN 8660 SmartBridge AV Ethernet Adapter Fits into Your Network. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-2 Connecting the PlugLAN 8660 SmartBridge AV Ethernet Adapter . . . . . . . . . . . 1-3 2 Advanced Configuration (Expert Users Only) . . . . . . . . . . . . . . . . . . 2-1 Launching the Web Management Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 Understanding the Pages in the Web Management Utility . . . . . . . . . . . . . . . . 2-3 Using the System Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4 Viewing System Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4 Changing the Login User ID and Password and Auto-Logout Time . . . . . . . 2-5 Changing the User ID and Login Password . . . . . . . . . . . . . . . . . . . . . . 2-5 Changing the Auto-Logout Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6 Viewing System Logs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6 Resetting the PlugLAN 8660 SmartBridge AV Ethernet Adapter . . . . . . . . . . 2-7 Factory Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . 2-8 Backing Up Configuration Settings . . . . . . .. . . . . . . . . . . . . . . . . . . . . . 2-10 Restoring Backup Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-11 Updating Firmware and FTP Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-13 Updating Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-13 Defining FTP Server Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-14 Using the Advanced Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-15 Enabling VLAN Functionality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-15 Configuring Packet Priority . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-16 Configuring Bandwidth Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-17 Configuring SNMP Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-18 Using the IP Address Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-20 Using the Powerline Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-21 Scanning Powerline Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-21 Changing the Powerline Network Password . . . . . . . . . . . . . . . . . . . . . . 2-21 vii
PlugLAN 8660 SmartBridge AV Ethernet Adapter User’s Guide 3 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 A Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1 LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1 Rear Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2 B Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1 C Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-1 D FCC Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-1 Index viii
PlugLAN 8660 SmartBridge AV Ethernet Adapter User’s Guide 1 Simple Installation Congratulations on your purchase of the PlugLAN 8660 SmartBridge AV Ethernet Adapter is a portable customer premises equipment (CPE) device that provides instant network connectivity by simply plugging into any PlugLAN-enabled electrical outlet. A high speed Ethernet connection to the PlugLAN system is securely established over existing electrical lines, delivering up to 85Mbps throughput. The PlugLAN 8660 SmartBridge AV Ethernet Adapter combines robust performance with advanced security and network management functionalities. Built- in data encryption and VLAN capabilities ensure security and privacy to every client. Each device can be controlled either independently or by using Asoka's PowerView™ management software. Fully plug-and-play, the PlugLAN 8660 SmartBridge AV Ethernet Adapter provides the perfect combination of functionality and convenience Your PlugLAN 8660 SmartBridge AV Ethernet Adapter has four light-emitting diode (LED) indicators and two RJ-45 Ethernet ports. • The LEDs show the connection status as well as other information, allowing you to identify network problems. • The RJ-45 Ethernet ports can be used to connect your PlugLAN 8660 SmartBridge to a device in your network. Please take a few minutes to read this chapter to install your PlugLAN 8660 SmartBridge AV Ethernet Adapter. Simple Installation 1–1
PlugLAN 8660 SmartBridge AV Ethernet Adapter User’s Guide Figure 1-1: PlugLAN 8660 SmartBridge AV Ethernet Adapter Package Contents After receiving your PlugLAN 8660 SmartBridge AV Ethernet Adapter, perform the following steps to ensure that your contents arrived safely. 1. Inspect the outer shipping container for damage during shipping. Report any sign of damage to the appropriate shipping carrier. 2. Remove the contents from the shipping container and check for the following items: • One PlugLAN 8660 SmartBridge AV Ethernet Adapter Adapter • One Ethernet cable • One CD containing user documentation (this User’s Guide) • PlugLAN 8660 SmartBridge AV Ethernet Adapter Quick Start Guide • Warranty and Support Information Card 3. Inspect your PlugLAN 8660 SmartBridge AV Ethernet Adapter thoroughly. If you see any signs of damage, contact the shipping carrier. How the PlugLAN 8660 SmartBridge AV Ethernet Adapter Fits into Your Network The PlugLAN 8660 SmartBridge AV Ethernet Adapter plugs into a PlugLAN-enabled power outlet to extend network services to any electrical outlet in any room. Your PlugLAN 8660 SmartBridge is compatible with all TCP/IP-based operating systems and requires no new cabling or drivers to be installed. All that is required is a PLugLAN Gateway and/or Gateway Expansion Adapters injecting network services into the powerline, and a compatible network-interface card (NIC) installed in your computers or other devices. This makes your PlugLAN 8660 SmartBridge compatible with any device including Microsoft Windows, Apple Macintosh, and Unix machines. 1–2 Simple Installation
CoAd onnectidapter or surgenetworPlugDevices catransfer raFor securitequipped wcombinatioyour PlugLsecure thaFigure ng the To connect1. Plug yooutlet nLEDs onshow stNOTE: DAdapte protectorrk performaNOTE: ItAdapter in2. Connecnetwortwo RJ8660 Sm gLAN 8660San communates (pleasety, your Pluwith 56-biton of the pLAN 8660 Sman wireless 1-2: ExampPlugLAt devices toour PlugLANnear the con the top otatus informo not conneter to a powr. This may nce. t is importanto the wall ct either enrk (RJ-45) p-45 connecmartBridgeSmartBridgeAicate with e contact yugLAN 8660t Data Encryrivacy of thmartBridge products. ple of How YAdapterAN 8660o your PlugN 8660 Smaomputer thof your Plugmation (seeect the Plugwer strip, e prevent thent that you p outlet rightnd of the suport. Connectors labelee (see FigurSimple InsAV EthernetA each otheryour Asoka 0 SmartBridyption Stanhe home poe AV EthernYour PlugLAr Fits into Yo0 SmartgLAN 8660 SartBridge AVhat you wangLAN 8660 e AppendixgLAN 8660 Sxtension coe unit fromplug the Plut-side up. upplied Ethect the otheed LAN Porre 1-3). stallationAdapter Userr quickly an reseller fodge AV Ethendard (DES)ower grid pnet Adapter AN 8660 Smour NetworktBridgeSmartBridgV Ethernetnt to conneSmartBridgx A CompoSmartBridgeord, uninter working prugLAN 8660 hernet cabler end of thrt on the bor’s Guide nd securelyr more infoernet Adap) encryptioplus encrypr significanmartBridge Ak e AV Ethge AV Ethert Adapter inect (see Figge AV Etheronents). e AV Ethernrruptible poroperty or d SmartBridgle to your che cable toottom of yoy at high daormation). pter is on. The ption makesntly more AV Ethernet hernet rnet Adaptento a wall gure 1-2). Trnet Adaptnet ower supplydegrade ge AV Ethercomputer’so either of tour PlugLAN1ata s er: The ter y, rnet s the N 1–3
1–4 Fi3. TheAdapte192to uto 2EthpleaCongraprocedYour PlSmartBNOTE: 3 for tPlugLAN 866igure 1-3: Le default IPer is 2.168.1.2use the sam253) or chaernet Adapase refer toatulations! ures for yougLAN 8660Bridge is no In the unroubleshoo60 SmartBridLAN Ports oP address fo253. Eitherme subnet (ange the IP pter to mato Chapter You have nour PlugLAN0 ow ready folikely eventting suggestSimpledge AV Ethern the BottomAV Ethernor the Plugr configure (192.168. address oftch your ne2. now compleN 8660 Smaor use. t you encoutions. e Installationrnet Adapterm of the Plunet AdapterLAN 8660 Syour compu1.xxx whf your PlugLetwork’s sueted the haartBridge AVnter a probn User’s Guide ugLAN 8660SmartBridguter and neere xxx is LAN 8660 Sbnet. For mardware insV Ethernetlem, pleasee SmartBridge AV Etheretworking d a number fmartBridgemore informstallation t Adapter. e refer to Chge rnet devices from 1 e AV mation, hapter
PlugLAN 8660 SmartBridge AV Ethernet Adapter User’s Guide 2 Advanced Configuration (Expert Users Only) After you install the PlugLAN 8660 SmartBridge AV Ethernet Adapter, use the information in this chapter to configure the SmartBridge. Topics in this chapter are: ˆ Launching the Web Management Utility on page 2-2 ˆ Understanding the Pages in the Web Management Utility on page 2-3 ˆ Using the System Menu on page 2-4 ˆ Using the Advanced Menu on page 2-15 ˆ Using the IP Address Menu on page 2-20 ˆ Using the Powerline Menu on page 2-21 WARNING! This chapter is for expert users who understand networking concepts and terminology. Advanced Configuration (Expert Users Only) 2–1
PlugLAN 8660 SmartBridge AV Ethernet Adapter User’s Guide Launching the Web Management Utility Your PlugLAN 8660 SmartBridge AV Ethernet Adapter provides a Web-based Web Management utility for performing advanced configuration activities. After you install your PlugLAN 8660 SmartBridge AV Ethernet Adapter, use the following procedure to launch the Web Management utility. 1. Start your Web browser and point it to the following default IP address: 192.168.1.253. The Welcome page in Figure 2-1 appears, with your cursor in the User ID field. NOTE: To connect to the Web Management utility, your PC’s IP address must be on the same subnet (192.168.1.xxx, where xxx is a number from 1 to 253) as the PlugLAN 8660 SmartBridge AV Ethernet Adapter. Figure 2-1: Welcome Page 2. Enter your user ID and password in the appropriate fields. The default user ID is admin and the default case-sensitive password is welcome. NOTE: For security, every password character appears as a bullet (•). 3. Click the Login button on the Welcome page. The System Details page appears. For more information about this page, see Viewing System Information on page 2-4. NOTE: By default, a login session lasts 3 minutes, after which the session ends automatically. To change the auto-logout time, see Changing the Auto-Logout Time on page 2-6. 2–2 Advanced Configuration (Expert Users Only)
PlugLAN 8660 SmartBridge AV Ethernet Adapter User’s Guide Understanding the Pages in the Web Management Utility The PlugLAN 8660 SmartBridge AV Ethernet Adapter Web Management utility provides an intuitive user interface for viewing and changing configuration settings. • The quick links panel appears at the top-right side on every page. It provides buttons for returning to the Home page (System Details page), viewing a glossary of terms that appear in the Web Management utility, viewing help about using the Web Management utility, and logging out of the Web Management utility. • The menu bar appears below the Quick Links panel on every page. It provides links for accessing each of the five menus in the Web Management utility. When you go to a menu, the pages associated with that menu appear in the navigation panel. • The navigation panel appears below the menu bar on the left side of the Web Management utility. The navigation panel shows the pages in each menu of the Web Management utility. • The main panel is the viewing area on the page. This is where you view and change your PlugLAN 8660 SmartBridge AV Ethernet Adapter’s configuration settings. Quick Links Menu Bar Navigation Panel Main Panel Figure 2-2: Areas in the Web Management Utility Screen Advanced Configuration (Expert Users Only) 2–3
PlugLAN 8660 SmartBridge AV Ethernet Adapter User’s Guide Using the System Menu The System menu lets you perform the following system activities: • View the status of your PlugLAN 8660 SmartBridge AV Ethernet Adapter. See page 2-4. • Change the login user ID, password, and auto-logout time. See page 2-5. • View the system log entries. See page 2-6. • Reset your PlugLAN 8660 SmartBridge AV Ethernet Adapter. See page 2-7 • Factory Default Settings. See page 2-8 • Backup and restore configuration settings. See page 2-10. • Backup and restore configuration settings. See page 2-11. • Update the firmware or configure the PlugLAN 8660 SmartBridge AV Ethernet Adapter to access an FTP server. See page 2-13. Viewing System Information The System Details page is a read-only screen that shows the status of your PlugLAN 8660 SmartBridge AV Ethernet Adapter. This page is the first one to appear when you log in to the PlugLAN 8660 SmartBridge Web Management utility. If you are already in the System menu, click Details in the navigation panel to display this page. Figure 2-3: System Details Page 2–4 Advanced Configuration (Expert Users Only)
Ch Cha anging tanging thPlugthe LogiUsing the Sused to logthe auto-loManagemepanel. he User IDThe defaulsecurity, wTo change NOTE: Foappears as1. From ththe cur2. Click in3. Click inpasswo4. Click inyou wacharactgLAN 8660Sin User ISystem Pasg in to the Wogout timeent utility mD and Loglt user ID iswe recomm the login uor security,s a bullet (•he System rrent user In the New n the Enterord. n the Enterant to use. ters and caAdvanced CSmartBridgeAID and Psword pageWeb Manag. To displaymenu bar aFigure 2-4gin Passws admin anend that youser ID and , each passw•). Password pID. User ID fier Current Pr New PasswThe passwoan be from ConfigurationAV EthernetAPassworde, you can gement utily this pagend then cli4: System Pword d the defaou change password,word characpage, click eld and entePassword fiword field ord can con 0 to 16 chan (Expert UseAdapter Userd and Au change thelity. This pa, click Systick PasswoPassword Pault passwothese setti use the focter you typ in the Old er the newield and en and enter nsist of alparacters loers Only)r’s Guide uto-Logoe user ID anage also lettem in the ord in the nage rd is welcongs. ollowing prope in this p User ID fiew user ID. nter the cu the new lopha and/or ng. out Timend passworts you chan Web navigation ome. For ocedure. rocedure eld and entrrent loginogin passwo numeric 2e rd nge ter ord 2–5
PlugLAN 8660 SmartBridge AV Ethernet Adapter User’s Guide 5. Click in the Confirm Your New Password field and enter the same login password you entered in step 2. . NOTE: Passwords are case sensitive. This means, for example, that the Web Management utility considers zeus and Zeus as different passwords. Be sure to type the correct upper- and lower-case characters when confirming your password here and when logging in to the Web Management utility. 6. Click the Apply button below the Confirm Your New Password field. Changing the Auto-Logout Time Auto-logout time is the number of minutes that elapse since logging in to the Web Management utility before a user session expires automatically. The auto-logout time is specified in seconds. The default setting is 180 seconds (3 minutes). To change the auto-logout time, use the following procedure. 1. From the System Password page, click in Auto-Logout Time field. 2. Delete the current value shown and enter a new value from 60 (1 minute) to 3600 (60 minutes). 3. Click the Apply button below the Auto-Logout Time field. Viewing System Logs Your PlugLAN 8660 SmartBridge AV Ethernet Adapter keeps a system log that records potential security threats and system information. Using the System Logs page, you can view the log. To display this page, click System in the Web Management utility menu bar and then click Logs in the navigation panel. Each row in the log represents an event, and includes the date and time of the event and a brief description of the event. The most current entry in the log appears at the bottom of the log. If desired, you can copy log entries by selecting the entries you want to copy, pressing Ctrl + C or right-clicking and selecting Copy from the pop-up menu, and then pasting them into another application using the Paste tools in the other program. The following buttons appear at the bottom of the System Logs page: • Download — lets you save the log and email it if desired. • Clear — removes the current entries in the log. • Refresh — updates the information shown in the page. 2–6 Advanced Configuration (Expert Users Only)
PlugLAN 8660 SmartBridge AV Ethernet Adapter User’s Guide Figure 2-5: System Logs Page Resetting Your PlugLAN 8660 SmartBridge AV Ethernet Adapter Using the Reset page, you can reset your PlugLAN 8660 SmartBridge AV Ethernet Adapter. To display this page, click System in the Web Management utility menu bar and then click Reboot System in the navigation panel. Figure 2-6: Reset Page Advanced Configuration (Expert Users Only) 2–7
PlugLAN 8660 SmartBridge AV Ethernet Adapter User’s Guide To reset your PlugLAN 8660 SmartBridge AV Ethernet Adapter, use the following procedure: NOTE: Resetting does not change or delete any configuration settings you changed. Therefore, if you changed any default configuration values, the changed values will be preserved when you reset your PlugLAN 8660 SmartBridge. 1. Click the System Reset button on the Reset page. 2. When the message in Figure 2-7 appears, click OK to reset your PlugLAN 8660 SmartBridge (or click Cancel to not reset it). Figure 2-7: Reboot Message Factory Default Settings Using the Reset page, you can return the SmartBridge to its factory default settings. To display this page, click System in the Web Management utility menu bar and then click Factory Reset in the navigation panel. To return your PlugLAN 8660 SmartBridge AV Ethernet Adapter to the factory default configuration that was in effect whe you first unpacked the SmartBridge, use the following procedure: 2–8 Advanced Configuration (Expert Users Only)
PlugLAN 8660 SmartBridge AV Ethernet Adapter User’s Guide 1. Click the Factory Default button on the Reset page. 2. When the message in Figure 2-8 appears, click OK to return your PlugLAN 8660 SmartBridge to its factory default configuration (or click Cancel to keep its current configuration). If you returned to te factory default settings, a message tells you that your PlugLAN 8660 SmartBridge AV Ethernet Adapter is rebooting. After the reboot completes, the Welcome page appears. NOTE:To log in to the Web Management utility after returning to the factory default settings, use the default user ID admin and the default case-sensitive password welcome to log in to the Web Management utility. Figure 2-8: Factory Default Message 2–9 Advanced Configuration (Expert Users Only)
Ba cking UpPlugLAN 866p ConfigThe configAdapter arSettings padisplay thithen click To save theprocedure1. Click thSetting2. When tclick Sa3. Use thedrive focontainNOTE: IfRestoring BAdva60 SmartBridgurationuration setre recordedage, you cas page, clic Backup See file conta: he Save bugs page. the File Dowave. e Save As dor the file ning the cof you save thBackup Settinnced Configudge AV Ether Settingttings for yod in a binaryan save thisck System ettings in thFigure 2-9aining the ctton underwnload dialdialog box tand click Snfigurationhe configurangs on pageuration (Expernet Adapters our PlugLANy file calleds file to a lo in the Webhe navigati9: Backup Sconfiguratir Backup Selog box in Fto select a Save (or clin settings).ation settine 2-10 to resert Users OnlUser’s GuideN 8660 Smad config.biocation forb Managemion panel. Settings Pagon settingsettings on Figure 2-10 location onck Cancel gs, you canstore them ly) eartBridge Ain. Using thr future resent utility ge s, use the fthe Backup0 on page 2n your comto not save use the pro if necessar AV Ethernethe Backup store. To menu bar afollowing p 2-11 appeamputer’s hare the file ocedure undry. 2–t and ars, rd der –10
PlugLAN 8660 SmartBridge AV Ethernet Adapter User’s Guide Figure 2-10: File Download Dialog Box Restoring Configuration Settings Using the Backup Settings page, you restore the settings when necessary. To display this page, click System in the Web Management utility menu bar and then click Restore Settings in the navigation panel. If you used the procedure under Resetting Your PlugLAN 8660 SmartBridge AV Ethernet Adapter on page 2-10 to back up the configuration settings for your PlugLAN 8660 SmartBridge, you can use the Restore Settings area to restore the backup settings if necessary (for example, if they become corrupt). To restore settings form a previous binary configuration file you backed up, use the following procedure: 1. Click the Browse button under Restore Settings on the Backup Settings page. 2–11 Advanced Configuration (Expert Users Only)
PlugLAN 8660 SmartBridge AV Ethernet Adapter User’s Guide 2. When the Choose file dialog box appears, locate the binary configuration file, select it, and click the Open button. The name of the file appears in the Browse field. 3. Click the Restore button. The precautionary message in Figure 2-11 appears, warning that any default settings you changed will be lost. Figure 2-11: Restore Warning Message 4. Click the OK button to restore the settings (or click Cancel to retain the current settings). If you restored the configuration settings, a message tells you that your PlugLAN 8660 SmartBridge AV Ethernet Adapter is resetting. After the reset completes, the Welcome page appears. NOTE: To log in to the Web Management utility after restoring settings, use the user ID and default case-sensitive password associated with the configuration settings you restored. 2–12 Advanced Configuration (Expert Users Only)
PlugLAN 8660 SmartBridge AV Ethernet Adapter User’s Guide Updating Firmware and FTP Settings From time to time, firmware upgrades will be made available that contain feature improvements. Using the Update Firmware page, you can update the firmware of your PlugLAN 8660 SmartBridge AV Ethernet Adapter. To display this page, click System in the Web Management utility menu bar and then click Firmware Upgrade in the navigation panel. Figure 2-12: Upgrade Firmware Page Updating Firmware To update firmware: 1. Go to the Asoka Web site at www.asokausa.com and download the latest firmware file. Remember the location where you download the file, because you will select that file later in this procedure. 2. Click the Browse button on the Update Firmware page. CAUTION! If you are not sure which firmware file you downloaded, please contact Asoka Technical Support to verify before you upgrade the firmware. Advanced Configuration (Expert Users Only) 2–13
PlugLAN 8660 SmartBridge AV Ethernet Adapter User’s Guide 3. When the Choose file dialog box appears, locate the firmware file you downloaded, select it, and click the Open button. The name of the file appears in the Browse field, and the current firmware version and date appear above the field. 4. Click the Update button. The precautionary message in Figure 2-13 appears. Figure 2-13: Firmware Upgrade Warning Message 5. Click the OK button to proceed with the upgrade (or click Cancel to cancel the upgrade). If you clicked OK, one or more messages indicate that your PlugLAN 8660 SmartBridge AV Ethernet Adapter may not respond for up to one minute as the firmware is upgraded and the device resets. 6. Click OK to continue. When the firmware upgrade and reset are complete, the System Details page appears automatically. NOTE: If the System Details page does not appear, enter the PlugLAN 8660 SmartBridge IP address (default is 192.168.1.253) in your Web browser to access the Web Management utility. Defining FTP Server Settings You can configure your PlugLAN 8660 SmartBridge AV Ethernet Adapter to access an FTP server by completing the fields in the FTP Server area on the Update Firmware page. Table 2-1 describes the fields in this area of the page. Table 2-1: FTP Server Area on the Upgrade Firmware Page Field Description IP Address Enter the IP address of the FTP server that the PlugLAN 8660 SmartBridge will access. User Name Enter the user name, from 3 to 16 characters, required to access the FTP server. Password Enter the password, from 3 to 16 characters, required to access the FTP server. File Name Enter the name of the file, from 5 to 16 characters, to be downloaded from the FTP server. Apply After you enter your configuration settings, click this button to apply the settings. Update Click this button to connect to the FTP server. 2–14 Advanced Configuration (Expert Users Only)
PlugLAN 8660 SmartBridge AV Ethernet Adapter User’s Guide Using the Advanced Menu The Advanced menu lets you perform the following activities: • Enable VLAN functionality. See page 2-15. • Set packet priority settings. See page 2-16. • Configure bandwidth control. See page 2-17. • Configure SNMP settings. See page 2-18. Enabling VLAN Functionality The VLAN Configuration page lets you enable or disable VLAN settings. This page is the first one to appear when you log in to the Advanced menu. If you are already in the Advanced menu, click VLAN Configuration in the navigation panel to display this page. Figure 2-14: VLAN Configuration Page A VLAN is an administrative grouping of network devices that is logically segmented, by functions, project teams, or applications rather than a physical or geographical basis. VLANs provide the segmentation services traditionally provided by routers in LAN configurations. For example, all workstations and servers used by a particular workgroup team can be connected to the same VLAN, regardless of their physical connections to the network. In this way, you can use VLANs to reconfigure the network through software rather than physically unplugging and moving devices or wires. Table 2-2 on page 2-16 describes the fields on this page. Advanced Configuration (Expert Users Only) 2–15
PlugLAN 8660 SmartBridge AV Ethernet Adapter User’s Guide Table 2-2: VLAN Configuration Page Field Description Set VLAN Type & ID Enter a VLAN value from 1 to 4093. Default value is 2. Apply Button After you enter your configuration settings, click this button to apply the settings. Configuring Packet Priority The Packet Priority page lets you control the priority of the packets and priority settings. To display the Packet Priority page, click Advanced in the Web Management utility menu bar and then click Packet priority in the navigation panel. Table 2-3 describes the fields on this page. Figure 2-15: Packet Priority Page Table 2-3: Packet Priority Page Field Description QoS Based on ToS Configure packet priority based on Type of Service. 2–16 Advanced Configuration (Expert Users Only)
PlugLAN 8660 SmartBridge AV Ethernet Adapter User’s Guide Table 2-3: Packet Priority Page (Continued) Field Description Fixed QOS Select the 802.1p priority setting to be used. Choices are: • Default = use this setting when none of the other settings is suitable. (default) • Background • Best effort • Excellent effort • Control load • Video or Audio • Voice • Network Control QoS Based on Port Select the port priority setting to be used. Choices are: • Default = use this setting when none of the other settings is suitable. (default) • Port 1 priority • Port 2 priority Apply Button After you enter your configuration settings, click this button to apply the settings. Configuring Bandwidth Control The Bandwidth Control page lets you set the upload and download speeds to a fixed speed. To display this page, click Advanced in the Web Management utility menu bar and then click Bandwidth Control in the navigation panel. Table 2-4 on page 2-16 describes the fields on this page. Figure 2-16: Bandwidth Control Page Advanced Configuration (Expert Users Only) 2–17
PlugLAN 8660 SmartBridge AV Ethernet Adapter User’s Guide Table 2-4: Bandwidth Control Page Field Description Downlink Bandwidth Control Select the download speed that the PlugLAN 8660 SmartBridge will use. Supported downlink speeds are: • Full Speed (default) • 64k bps • 128k bps • 256k bps • 512k bps • 1M bps • 4M bps • 10M bps Uplink Bandwidth Control Select the upload speed that the PlugLAN 8660 SmartBridge will use. Supported uplink speeds are: • Full Speed (default) • 64k bps • 128k bps • 256k bps • 512k bps • 1M bps • 4M bps • 10M bps Apply Button After you enter your configuration settings, click this button to apply the settings. Configuring SNMP Settings The SNMP Configuration page lets you set the configure the SNMP settings for your PlugLAN 8660 SmartBridge AV Ethernet Adapter. SNMP is an application-layer protocol that provides a message format for communication between SNMP managers and agents. SNMP provides a standardized framework and a common language used for the monitoring and management of devices in a network. For more information, refer to the documentation that came with your SNMP application. You specify SNMP settings from the SNMP Configuration page. To display this page, click Advanced in the Web Management utility menu bar and then click SNMP Configuration in the navigation panel. Table 2-5 on page 2-19 describes the fields on this page. 2–18 Advanced Configuration (Expert Users Only)
PlugLAN 8660 SmartBridge AV Ethernet Adapter User’s Guide Figure 2-17: SNMP Configuration Page Table 2-5: SNMP Configuration Page Field Description SNMP Get Community Enter the correct Get Community.SNMP Set Community Enter the correct Set Community.SNMP Admin Community Enter the name of the admin community.Trap 1 IP Address Enter the IP address of the trap 1 destination device. Trap 1 Community String Enter the community string for trap 1.Trap 2 IP Address Enter the IP address of the trap 2 destination device. Trap 2 Community String Enter the community string for trap 2.Trap 3 IP Address Enter the IP address of the trap 3 destination device. Trap 3 Community String Enter the community string for trap 3.Apply Button After you enter your configuration settings, click this button to apply the settings. Advanced Configuration (Expert Users Only) 2–19
PlugLAN 8660 SmartBridge AV Ethernet Adapter User’s Guide Using the IP Address Menu Configuring IP Address The IP Address menu lets you set or change the IP address for the device. You can use this IP address to manage your PlugLAN 8660 SmartBridge AV Ethernet Adapter. To display this page, click IP Address in the Web Management utility menu bar. Table 2- 6 describes the fields on this page. Figure 2-18: IP Address Page Table 2-6: IP Address Page Field Description Obtain an IP address automatically Select this option if the PlugLAN 8660 SmartBridge will obtain its IP address automatically (for example, from a DHCP server). Use the following IP address Select this option if the PlugLAN 8660 SmartBridge will obtain its IP address manually from the settings you specify in the following three fields. IP Address Enter the IP address for the PlugLAN 8660 SmartBridge. Subnet Mask Enter the subnet mask for the PlugLAN 8660 SmartBridge. GAteway IP Address Enter the gateway IP address for the PlugLAN 8660 SmartBridge AV Ethernet Adapte Configuring IPV6 Address This page allow user to set or change the IPV6 address for the device, 2–20 Advanced Configuration (Expert Users Only)
PlugLAN 8660 SmartBridge AV Ethernet Adapter User’s Guide User can use this IPV6 address to manage the device, Don't support in this firmware now. Using the Powerline Menu Using the Powerline Device Scan page of the Web Management utility, you can scan the devices on your Powerline network and view or change the Powerline network password. 1. Start the Web Management utility (see Launching the Web Management Utility on page 2-2). 2. Click Powerline in the Web Management utility menu bar. The PowerLine Device Scan page appears (see Figure 2-19). Figure 2-19: Powerline Device Scan Page Scanning Powerline Devices The Powerline Device Scan page shows all Powerline devices on your Powerline network. It also includes a Scan Now button that you can click to scan the Powerline devices on your Powerline network. When you click this button, the page reflects any Powerline devices that have been added to or removed from the Powerline network. Changing the Powerline Network Password Using the Powerline Network Password page, you can change the password for your Powerline network. The default password is PlugLAN. NOTE: We recommend that you change the default network password on all your PlugLAN 8660 devices. Changing the network password prevents neighbors or outsiders from accessing your network. However, it also requires you to configure your other Powerline devices to use the same password. To change the Powerline network password: 1. Using the Web Management utility, click Powerline in the Web Management utility menu bar. Then click NEK Configuration in the Advanced Configuration (Expert Users Only) 2–21
PlugLAN 8660 SmartBridge AV Ethernet Adapter User’s Guide navigation panel. The Powerline Network Password appears (see Figure 2- 20 on page 2-20). Figure 2-20: Powerline Network Password 2. In the Network Password field, enter the case-sensitive Powerline network password. The password can be from 4 to 18 alphanumeric characters long. 3. Click the Apply button. Advanced Configuration (Expert Users Only) 2–22
PlugLAN 8660 SmartBridge AV Ethernet Adapter User’s Guide 3 Troubleshooting This chapter contains troubleshooting suggestions you will find helpful in the unlikely event you encounter a problem with your PlugLAN 8660 SmartBridge AV Ethernet Adapter. PlugLAN 8660 SmartBridge AV Ethernet Adapter is Not Working 1. Confirm that the PlugLAN 8660 SmartBridge AV Ethernet Adapter is plugged into a working AC outlet. 2. Plug a device that is known to work (such as a lamp) into the outlet to confirm that the outlet is working. 3. Verify that the AC outlet is not controlled by a wall switch, which can inadvertently remove power from the outlet. Wired Connections are Not Working 1. Verify that the Ethernet LAN cable is connected securely to your PlugLAN 8660 SmartBridge AV Ethernet Adapter and the attached device. 2. See whether an event was generated in the system log (see Viewing System Logs on page 2-6). You Cannot Access the Web Management Utility 1. If you changed the default IP address of the Web Management utility, enter the new IP address in your Web browser to access the Web Management utility and make sure your PC is on the same subnet as your PlugLAN 8660 SmartBridge AV Ethernet Adapter. 2. If you restored your configuration from a binary configuration file (see Restoring Backup Settings on page 2-10), enter the IP address associated with the configuration file Troubleshooting 3–1
PlugLAN 8660 SmartBridge AV Ethernet Adapter User’s Guide Web Management Utility Times Out Too Quickly By default, the Web Management utility remains open for 3 minutes. If you want to change this time interval, change the auto-logout time on the System Password page (see Changing the Auto-Logout Time on page 2-6). One of the LEDs Does Not Behave as Expected 1. Be sure you understand the normal behavior of the LED (see Appendix A). 2. Disconnect and reconnect the PlugLAN 8660 SmartBridge AV Ethernet Adapter to the AC outlet. 3. If the problem continues, please contact Asoka Technical Support (see Technical Support on page iii). You Forgot the Login Password 1. The default case-sensitive password is welcome. You can change this password to one that is more meaningful using the Web Management utility. For more information, see Changing the User ID and Login Password on page 2-5. 2. If you forget the password, return the PlugLAN 8660 SmartBridge AV Ethernet Adapter to its factory default settings (see Returning to Factory Default Settings on page 2-8). . CAUTION! If you return the PlugLAN 8660 SmartBridge AV Ethernet Adapter to factory default settings, the Adapter discards all custom settings you set and returns to the settings that were in effect when you removed the bridge from the box. NOTE: All Powerline devices on your Powerline network must use the same Powerline password (NEK). If you encounter a problem, please contact Asoka Technical Support (see Technical Support on page iii). 3–2 Troubleshooting
PlugLAN 8660 SmartBridge AV Ethernet Adapter User’s Guide A Components This appendix describes the LEDs and rear label on your PlugLAN 8660 SmartBridge. LEDs The top panel of your PlugLAN 8660 SmartBridge AV Ethernet Adapter has several light- emitting diodes (LEDs) that show status information (see Figure A- 1). Table A-1 describes the meanings of the LEDs. Figure A-1: Front Panel LEDs Components A–1
Rear LaA–2 abel The reaAdapte• Mod• Uniq• IP A• WAN• Pow• Ethe• SeriFigure NOTEcard foPlugLAN 866LEDPower PLC ACETH 1 ETH 2 ar label on er shows thedel numberque deviceAddress N MAC Addrwerline MACernet MAC ial number A-2 shows: Please wor future reFigure A-2Ethernet A60 SmartBridD StatuONOFFCT OFFBlinkinOFFBlinkONOFFBlinkON your PlugLe followingr e password ress C Address Address an exampwrite this ineference. 2: ExampleAdapter Comdge AV EtherTable A-1usPlugLANiiPlugLANt There isngThere isThere isThere isThere isThere isThere isThere isLAN 8660 Sg informati le of the information of Rear Labmponents rnet Adapter1: Top PaN 8660 Smartg N 8660 Smartii s no activity s activity on s a no Etherns a Ethernet s Ethernet cos a no Etherns a Ethernet s Ethernet comartBridgeon: nformation in your Wabel on PlugLUser’s Guideanel LEDsDescriptiontBridge AV EtBridge AV E on the Powe the Powerlinnet activity. traffic.onnectivity.net activity. traffic.onnectivity.e AV Ether shown on arranty SupLAN 8660 Smes n Ethernet AdaEthernet Adaerline netwone network. net the rear lapmartBridge pter is pter is rk. abel. mation AV
PlugLAN 8660 SmartBridge AV Ethernet Adapter User’s Guide B Specifications This appendix lists the specifications for your PlugLAN 8660 SmartBridge. Standards Compliance: • HomePlug® 1.0 • IEEE 802.3 10BASE-T Ethernet • IEEE 802.3x Flow Control • IEEE 802.1D Spanning Tree Protocol • IEEE 802.1p Priority • IEEE 802.q VLAN • IEFT RFC1332 IP Control Protocol • IEFT RFC 2684 Bridged Ethernet • IEFT RFC 1157 SNMP v2 & v3 • IEFT RFC 1213 MIB II • IEFT RFC 826 ARP Network Protocol: TCP/IPNetwork Interfaces: • Two RJ-45 10/100 Base-TX auto-negotiation LAN portsModulation: • OFDM • QAM 256/64/16 • DQPSK • DBPSK • ROBO LEDs: • Power • PLC Activity • ETH Link • ETH Link Memory: • 4 MBytes NOR Flash • 16 MBytes SDRAM Specifications B–1
PlugLAN 8660 SmartBridge AV Ethernet Adapter User’s Guide Processor: • MIPS 4Kc CPU • Embedded cache, 8K-byte I-cache, 8K-cache • Embedded memory management unit (MMU) 32-entry TLB • 175MHz/227 MIPS • Address Assignment: Static IP • Powerline Security: 56-bit DES encryption Bandwidth: • Up to 85 Mbps PHY rate or 25 Mbps TCP rate over the powerlineDistance: • 300 meters (1000 feet)Operating Frequency: • 4 to 21 mHzModulation Schemes: • Orthogonal Frequency Division Multiplexing (OFDM) • Symbol Modulation DQPSK • DBPSK • ROBO Carrier Modulation Management Features: • Administration Interface: Web graphical user interface with protected user name and password, remotely accessible from designated IP address Maintenance: • Save/restore configuration • Diagnostics • Upgrades via Web browser • Logging Power Supply: • 100-240V 50-60Hz Internal Universal Power Maximum Power: • 7WDimensions: • Size 9.5 x 6.5 x 4 cm (L x W x H) • Weight 150g(.33lbs) • Cable length 6' Environmental Specifications: • Operating temperature: 32°F to 122°F (0°C to 50°C) • Operating humidity: 10% to 90% Non-condensing • Storage temperature: -40°F to 158°F (-40°C to 70°C) • Storage humidity: 10% to 90% Non-condensing Electromagnetic Emissions • FCC Part 15 Class B • UL (US and Canada) • CE Warranty: lifetime B–2 Specifications
PlugLAN 8660 SmartBridge AV Ethernet Adapter User’s Guide C Warranty Asoka warrants that (a) the hardware components of the product will be free from defects in materials and workmanship under normal use from the date of purchase when used within the limits set forth in the Specifications section of the User’s Guide, and (b) the software components will perform substantially in accordance with Asoka's published specifications for ninety (90) days from the date of purchase, but does not warrant that the software will be error-free or free of all defects. Should a product fail to perform as described in the User’s Guide, it will be repaired or replaced with the same or functionally equivalent product by Asoka, at its discretion, free of charge provided that you: (a) return the failed product to an Asoka designated repair facility with shipping charge prepaid, and (b) provide Asoka with proof of the original date of purchase. Repaired or replacement products will be returned to you with shipping charges prepaid. Asoka warrants any replaced or repaired product or component for life of the product. This warranty extends only to you, the original purchaser and is not transferable to any subsequent purchasers. This warranty does not apply if, in the judgment of Asoka, the product fails due to damage from shipment, handling, storage, accident, abuse, misapplication or misuse, or if it has been used or maintained in a manner not conforming to product manual instructions, has been modified in any way, or has had any serial number removed or defaced. Repair by anyone other than Asoka or an approved agent will void this warranty. The maximum liability of Asoka under this warranty is limited to the purchase price of the product covered by the warranty. Prior to returning any defective product, the purchaser or the authorized merchant from whom the purchaser originally bought the product must obtain a Return Material Warranty C–1
C–2 Warranty PlugLAN 8660 SmartBridge AV Ethernet Adapter User’s Guide Authorization (RMA) number from Asoka. All defective products should be returned to Asoka with shipping charges prepaid. Asoka will not accept collect shipments. WHILE ASOKA HAS MADE EVERY EFFORT TO PROVIDE CLEAR AND ACCURATE TECHNICAL INFORMATION ABOUT ITS PRODUCTS, ASOKA ASSUMES NO LIABILITY FOR ANY EVENTS ARISING OUT OF THE USE OF THE TECHNICAL INFORMATION OR THE PRODUCT, EXCEPT AS SPECIFICALLY PROVIDED IN THIS AGREEMENT OR AS REQUIRED BY LAW. THE WARRANTIES AND REMEDIES STATED ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHERS, ORAL OR WRITTEN, EXPRESS OR IMPLIED. ANY AND ALL OTHER WARRANTIES, INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS ARE EXPRESSLY EXCLUDED. ASOKA SHALL NOT BE LIABLE, UNDER ANY CIRCUMSTANCES, TO ANY PERSON OR ENTITY FOR ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, DAMAGES RESULTING FROM THE USE OR MALFUNCTION OF THE PRODUCTS, LOSS OF PROFITS OR REVENUES, BUSINESS INTERRUPTION, OR COSTS OF REPLACEMENT GOODS, EVEN IF ASOKA IS INFORMED IN ADVANCE OF THE POSSIBILITY OF SUCH DAMAGES.
D-1 PlugLAN 8660 SmartBridge AV Ethernet Adapter User's Guide FCC Notice FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: z Reorient or relocate the receiving antenna. z Increase the separation between the equipment and receiver. z Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. z Consult the dealer or an experienced radio/TV technician for help This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: 1 This device may not cause harmful interference, and 2 This device must accept any interference received, including interference that may cause undesired operation.
PlugLAN 8660 SmartBridge AV Ethernet Adapter User’s Guide FCC RF Radiation Exposure StatementThis equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Note: The manufacturer is not responsible for any radio or TV interferencecaused by unauthorized modifications to this equipment. such modificationscould void the user’s authority to operate the equipment.
PlugLAN 8660 SmartBridge AV Ethernet Adapter User¡¯s Guide Index A Auto-logout time 2-6 B Backing up configuration settings 2-9 Bandwidth control 2-15 C Changing auto-logout time 2-6 login password 2-5 PowerLine network password 2-19 Configuration settings backing up 2-9 restoring 2-10 Connecting the PlugLAN 8660 SmartBridge AV Ethernet Adapter 1-3 Contact information iii Contents of package 1-2 Customer service iii F Firmware, updating 2-11 G Getting help iii H How the PlugLAN 8660 SmartBridge AV Ethernet Adapter fits into your network 1-2 I Information about the system 2-4 Installing PlugLAN 8660 SmartBridge AV Ethernet Adapter 1-3 L Launching the Web Management 2-2 LEDs A-1 Login password 2-5 N Network password 2-19 P Package contents 1-2 Packet priority 2-14 packet priority 2-14 Pages in the Web Management 2-3 Password for Powerline network 2-19 PlugLAN 8660 SmartBridge AV Ethernet Adapter backing up configuration settings 2-9 bandwidth control 2-15 connecting 1-3 in your network 1-2 LEDs A-1 package contents 1-2 packet priority 2-14 rebooting 2-7 restoring configuration settings 2-10 SNMP 2-16 specifications B-1 updating firmware 2-11 warranty C-1 PowerLine network password 2-19 PowerLine Network Password page 2-19 R Rear label A-2 Rebooting PlugLAN 8660 SmartBridge AV Ethernet Adapter 2-7 Restoring configuration settings 2-10 S Scanning Powerline devices 2-19 SNMP 2-16 System information 2-4 System logs 2-6 System pages 2-4, 2-18 T Technical support iii Index-1
Index-2 PlugLAN 8660 SmartBridge AV Ethernet Adapter User¡¯s Guide Top panel LEDs A-1 Troubleshooting 3-1 U Updating firmware 2-11 V Viewing system information 2-4 Viewing system logs 2-6 W Warranty C-1 Web Management 2-5, 2-14, 2-15, 2-16 auto-logout time 2-6 backing up configuration settings 2-9 launching 2-2 pages in 2-3 PowerLine Network Password page 2-19 rebooting PlugLAN 8660 SmartBridge AV Ethernet Adapter 2-7 restoring configuration settings 2-10 system logs 2-6 system pages 2-4, 2-18 viewing system information 2-4
Asoka USA Corporation 2344-A Walsh Avenue Santa Clara, CA95051 USA USA Phone: (408) 550–8167 Fax: (408) 884–2390 www.asokausa.com 66-0350-00 Rev.001

Navigation menu