ASOKA USA PL9650-ETH Ethernet Adapter User Manual PL9650UG ENG 0717 0214

ASOKA USA Corporation Ethernet Adapter PL9650UG ENG 0717 0214

Users Manual

User’s Guide PlugLink 9650 Ethernet Adapter PL9650-ETH © 2008 Asoka USA Corporation. Asoka, PlugLink and the Asoka logo are registered trademarks or trademarks of Asoka USA Corporation. Information is subject to change without notice. All rights reserved. PL9650UG-66-0302-011
Asoka® User’s Guide PlugLink 9650 Ethernet Adapter PL9650-ETH Page 2 Table of Content Chapter Title Page 1 Introduction 32 Important Safety Information 43 Learning About your Powerline Ethernet Adapter 54 Preparing to Install 75 Installing the Powerline Ethernet Adapter 96 Using Setup Assistant 147 Using Admin Utility 178 Technical Support Information 219 Technical Specifications 2210 FCC Statement 2311 CE Statement 2412 Warranty Information 25
Asoka® User’s Guide PlugLink 9650 Ethernet Adapter PL9650-ETH Page 3 Chapter 1 Introduction Thank you for purchasing a PlugLink 9650 Ethernet Adapter (PL9650-ETH) from Asoka. This adapter lets you network your home or office by simply plugging directly into your wall outlet. Now, networking is as easy as plugging in a night light. With your PlugLink 9650 Ethernet Adapter, you can easily share your high-speed Internet broadband, mp3s, video and gaming throughout the home or office without pulling any new cabling. This unit will not interfere with other household appliances such as hair dryers, vacuum cleaners or microwave ovens. Consuming only 5 watts of power, it is environmentally friendly and will not noticeably increase your electrical bill. It is a simple, secure and reliable choice for web surfing, playing games, complimenting your existing wireless network, mp3 streaming and even high-definition (HD) video sharing. This User’s Guide shows you how to connect your PlugLink 9650 Ethernet Adapter to your PC or cable/DSL router. Setup is easy, just follow the instructions in this guide and your network will be up and running in a matter of minutes. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER¡¯S AUTHORITY TO OPERATE THE EQUIPMENT.
Asoka® User’s Guide PlugLink 9650 Ethernet Adapter PL9650-ETH Page 4 Chapter 2 Important Safety Instruction for the PlugLink 9650 Ethernet Adapter The following precautions should be taken when using this product: Read all instructions before installing and operating this product. Do not open the cover on this product and/or alter this product in any way. Follow common household electrical safety practices. If you have any questions or concerns regarding these safety measures, please contact Technical Support at 1-888-ASOKAUSA(276-5287) or email at support@asokausa.comMonday through Friday from 9:00 am to 5:00 pm PST, excluding holidays.
Asoka® User’s Guide PlugLink 9650 Ethernet Adapter PL9650-ETH Page 5 Chapter 3 Learning about your PlugLink 9650 Ethernet Adapter Package Contents PlugLink 9650 Ethernet Adapter (PL9650-ETH) 6 feet Ethernet cable Quick Installation Guide Installation Resource CD Warranty and Support Information Card If any of the parts are incorrect, missing, or damaged, contact the retailer where you made your purchase. Keep the carton, including the original packing materials, in case you need to return the unit for repair. The Front Panel The front panel of the PL9650-ETH Adapter contains the status lights described below. Figure 3-1: PL9650-ETH Front Panel You can use the status lights to verify connections. Viewed from top to bottom, left to right, the table describes the lights on the front panel of the unit. Table 3-1: Status Light Descriptions Power On Off Indicates Device Powered On Indicates No Power PLC Activity Blinking Off Indicates Activity on Powerline Indicates No Activity on Powerline (Should blink Intermittently) ETH Link On Blinking Off Indicates Ethernet Connectivity Indicates Ethernet Traffic Indicates No Ethernet Activity
Asoka® User’s Guide PlugLink 9650 Ethernet Adapter PL9650-ETH Page 6 The Bottom Panel The bottom panel of the PL9650-ETH contains an Ethernet (RJ-45) port as shown in figure 3-2. Figure 3-2: PL9650-ETH Front PanelThe Rear Panel The label on the rear panel of the PL9650-ETH Adapter contains the items listed below. MAC address Model number Part number Serial number Unique device password Note: For future convenience, please write this information down in your Warranty Support Information card. Figure 3-3: Rear Label
Asoka® User’s Guide PlugLink 9650 Ethernet Adapter PL9650-ETH Page 7 Chapter 4 Preparing to Install the PlugLink 9650 Ethernet Adapter The PlugLink 9650 Ethernet Adapter lets you set up a home or an office network using your existing electrical outlets. It can also easily compliment your existing network by connecting to any device with a 10BaseT/ 100BaseT Ethernet-capable device. In order to share a peer-to-peer connection between computers, all you will need is: One (1) PL9650-ETH device attached to each computer. Figure 4-1: Peer-to-peer network diagram. In order to share a Broadband connection between computers, all you will need is: One (1) PL9650-ETH device attached to each computer Standard Cable/DSL Modem Standard Cable/DSL Router or Wireless Router [Figure 4-2: Sharing broadband connection network diagram.
Asoka® User’s Guide PlugLink 9650 Ethernet Adapter PL9650-ETH Page 8 You can also use the PlugLink 9650 Ethernet Adapter with other Ethernet enabled device like IP Cameras, IP STB, game consoles, and many more. Figure: 4-3: Networking other Ethernet enabled devices.
Asoka® User’s Guide PlugLink 9650 Ethernet Adapter PL9650-ETH Page 9 Chapter 5 Installing the PlugLink 9650 Ethernet Adapter Note: Do not connect the PlugLink 9650 Ethernet Adapter into a power strip, extension cord, uninterruptible power supply (UPS), or surge protector. This may prevent the unit from working properly or degrade the network performance. 1. Connect each of your PlugLink 9650 Ethernet Adapters. a) Connect the unit into a nearby wall outlet b) Connect the enclosed Ethernet cable to the Ethernet port of the unit c) Connect the other end of the cable to the Ethernet port of the PC 2. Insert the enclosed Installation Resource CD into your CD-ROM drive. The PlugLink 9650 Ethernet Adapter Installation Utility should appear automatically. If it does not appear within 30 seconds, select your CD-ROM drive and double-click on the icon named “Setup.exe” to initiate the Installation Utility. 3. The Welcome screen should appear. Click on “Install Driver and Utility” to proceed to installation. Figure: 5-1: Welcome screen. 4. Click “Next” to begin the installation process.
Asoka® User’s Guide PlugLink 9650 Ethernet Adapter PL9650-ETH Page 10 Figure: 5-2: Begin Installation Screen. 5. Click “Next” to continue Installation. Figure: 5-3: InstallShield Installation Welcome Screen.
Asoka® User’s Guide PlugLink 9650 Ethernet Adapter PL9650-ETH Page 11 6. An End User Software License Agreement (EULA) should appear. Read thoroughly, click “Agree” to continue. Figure: 5-4: End User License Agreement screen. 7. Select the destination folder where you want to install and Click ''Install''.
Asoka® User’s Guide PlugLink 9650 Ethernet Adapter PL9650-ETH Page 12 Figure: 5-5: Installation Destination screen. 8. Click “Begin” to start the installation. Figure: 5-6: Begin Installation screen.
Asoka® User’s Guide PlugLink 9650 Ethernet Adapter PL9650-ETH Page 13 9. Click ”Continue” to complete the installation. Figure: 5-7: Complete Installation screen. 10. Click “Close” to complete the installation.
Asoka® User’s Guide PlugLink 9650 Ethernet Adapter PL9650-ETH Page 14 Figure: 5-8: Finish Installation screen.11. A notification window will appear confirming the completion of the installation. Click “OK” to begin the Setup Assistant. Figure: 5-9: Installation completion notification screen.
Asoka® User’s Guide PlugLink 9650 Ethernet Adapter PL9650-ETH Page 15 Chapter 6 Using the Setup Assistant Setup Assistant will help guide you to configure your PlugLink 9650 Ethernet Adapter. 1. The Setup Assistant automatically starts after completing the installation. You may also start the Setup Assistant manually by clicking on the Setup Assistant icon on your desktop. PlugLink 9650 Setup Assistant.lnkFigure: 6-1: Setup Assistant Icon2. Click “Next” to begin the Setup Assistant. For advanced users, you may bypass the Setup Assistant and click on “Admin Utility” to manually configure settings. For instructions on using the Admin Utility, go to Chapter 7. Figure 6-2: Setup Assistant Welcome Screen. 3. Select which application you are using the PlugLink 9650 Adapter for and Click “Next”. There are three applications options available. Online Game/ Internet Select this if you are going to use the device with your PC or game console. Audio or Video Select this if you are going to use this device for IPTV or audio
Asoka® User’s Guide PlugLink 9650 Ethernet Adapter PL9650-ETH Page 16 and video streaming. Voice over IP Select this if you are going to use this device with your VoIP phone. Table 6-1: Applications options. Figure 6-3: Applications screen. 4. Select to change the device name and Click “Next”. Changing your device name can help enable easier device recognition. For example, you can name the devices according to where each unit is located in your building. (Ex. Bedroom, Office, Living Room, etc.) Yes To change device name. No To keep the default device name, ‘PlugLink(local)’. Table 6-2: Device Name options.
Asoka® User’s Guide PlugLink 9650 Ethernet Adapter PL9650-ETH Page 17 Figure 6-4: Device Name option screen. 5. Select to change the network password and Click “Next”. The local device network password screen allows you to change your network password. It is highly recommended to change the network password on all your PlugLink devices. Changing the network password will prevent your neighbors or outsiders from accessing the network. Yes To change local device network password. No To keep the existing local device network password. Factory Default To reset to the default local device network password, ‘HomePlug’. Table 6-3: Local Device Network Password Options.
Asoka® User’s Guide PlugLink 9650 Ethernet Adapter PL9650-ETH Page 18 Figure 6-5: Local Device Network Password Screen. 6. Click ‘Finish’ to complete the configuration and exit the Setup Assistant or Click ‘Admin Utility’ for advanced settings. Figure 6-6: Setup Assistant Completion Screen.
Asoka® User’s Guide PlugLink 9650 Ethernet Adapter PL9650-ETH Page 19 Chapter 7 Using the Admin Utility The Admin Utility is a tool for Advanced Users. It allows you to manually configure a PlugLink 9650 Ethernet Adapter that is directly connected to your Personal Computer or any PlugLink 9650 Ethernet Adapters that are remotely residing on your PlugLink Powerline network. PlugLink Admin Utility.lnkFigure 7-1: Admin Utility Icon The Admin Utility consists of four (4) screens. Profile ScreenThe Profile Screen displays information about all Powerline devices attached directly to your PC and other Powerline devices on your network. The screen displays the Device Name, MAC Address, and Type (local or remote; 14mbps or 85mbps) of connection for each device on your network. To refresh the list of Powerline devices, Click on the ‘Rescan’ icon. (Note: Devices set up with a different network password will NOT show up on this list.) Figure 7-2: Profile Screen. Speed Screen
Asoka® User’s Guide PlugLink 9650 Ethernet Adapter PL9650-ETH Page 20 The Speed Screen displays the speed of your device’s connection to the Powerline network. You can check the speed of the other devices by clicking on them. Figure 7-3: Speed Screen. Device ScreenThe Device Screen displays the names of all the devices on your network. It also allows you to rename devices enabling easier device recognition. To rename the device: 1. Double-click on the device you want to rename on the left. 2. Enter new device name in the field box on the right and click “Update”. 3. A confirmation screen will appear to inform you if the device name change was successful or unsuccessful.
Asoka® User’s Guide PlugLink 9650 Ethernet Adapter PL9650-ETH Page 21 Figure 7-4: Device Screen Advanced ScreenThe Advanced Screen allows you to Maintain security and application for the device that is attached directly to your PC Maintain security for other Powerline devices on your network. To modify the security and application on a device that is directly connected to your PC: 1. Select the device connected directly to your computer on the left panel 2. Type in the current network password in the field box next to “New Network Password”. 3. Type the new password in the field box labeled New Network Password. 4. Click on the drop down menu next to “Local Device Application.” 5. Select the application you would like to change to. See table 7.1 for options. 6. Click ‘Update’. 7. A screen will appear asking if you are sure you want to these changes. Click “Yes”. 8. A confirmation screen will appear to inform you if the changes were successful or unsuccessful. Online Game/ Internet Select this if you are going to use the device with your PC or game console. Audio or Video Select this if you are going to use the device for IPTV or any video and audio streaming. Voice over IP Select this device if you are going to use the device for VoIP services. (This excludes web-based voice programs such as Yahoo Voice or
Asoka® User’s Guide PlugLink 9650 Ethernet Adapter PL9650-ETH Page 22 Skype. These should default to the ‘Online Game/ Internet’ option). Table 7-1: Local Device Application Options Figure 7-5: Advanced ScreenTo modify the security on a device that is remotely connected but on the same Powerline network: 1. Select the remotely connected device you would like to change the password on. 2. Type in the device password found on the product label located in the back of your device in the field box Device Password. 3. Type the new password in the field box labeled ‘New Network Password’. 4. Click ‘Update’. 5. A screen will appear asking if you are sure you want to change the password. Click ‘Yes’. 6. A confirmation screen will appear to inform you if the password change was successful or unsuccessful.
Asoka® User’s Guide PlugLink 9650 Ethernet Adapter PL9650-ETH Page 23 Figure 7-6: Advanced Screen Rescan IconThe Rescan Icon allows you to rescan the devices on the Powerline network.
Asoka® User’s Guide PlugLink 9650 Ethernet Adapter PL9650-ETH Page 24 Chapter 8 Technical Support PLEASE REFER TO THE WARRANTY AND SUPPORT INFORMATION CARD THAT WAS SHIPPED WITH YOUR PRODUCT. By registering your product at www.asokausa.com/register, we can provide you with faster expert technical support and timely notices of product and software upgrades. Support Information Phone: 1-888-ASOKAUSA(276-5287) Email: support@asokausa.comURL: www.asokausa.com
Asoka® User’s Guide PlugLink 9650 Ethernet Adapter PL9650-ETH Page 25 Chapter 9Technical Specifications Standards ComplianceHomePlug® I IEEE 802.3 10BASE-T Ethernet System RequirementsWindows® 98 SE, 2000, ME and XP OS Network ProtocolTCP/IP Network InterfaceEthernet (RJ-45) Bandwidth85 Mbps Operating Frequency4 to 21 MHz Modulation SchemesOrthogonal Frequency Division Multiplexing (OFDM) Symbol Modulation DQPSK DBPSK ROBO Carrier Modulation Security56-bit DES Encryption Additional ProtocolsForward Error Correction (FEC) Automatic Channel Adaptation Power Supply100-240V LEDsPowerPLC Activity Ethernet Activity DimensionsSize: 3.5x2.4x1.8'' (L x W x H) Weight: 125g Cable length: 6’ Environmental SpecificationsOperating temperature: 32°F to 113°F (0°C to 45°C) Operating humidity: 10% to 85% Non-condensingStorage temperature: -4°F to 158°F (-20°C to 70°C) Storage humidity: 5% to 90% Non-condensingElectromagnetic EmissionsFCC Part 15 Class B UL (US and Canada) CE
Asoka® User’s Guide PlugLink 9650 Ethernet Adapter PL9650-ETH Page 26 Chapter 10 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC RF Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
Asoka® User’s Guide PlugLink 9650 Ethernet Adapter PL9650-ETH Page 27 Chapter 11
Asoka® User’s Guide PlugLink 9650 Ethernet Adapter PL9650-ETH Page 28 Chapter 12 Warranty and Support Information Thank you for selecting an Asoka product! Please retain the receipt as proof of purchase and write down the information below in case you need to obtain support. Date of Purchase: __________________________________ Model: ________________________________________ Serial No: ________________________________________ Device Password: __________________________________ MAC Address: ______________________ WarrantyAsoka warrants that (a) the hardware components of the product will be free from defects in materials and workmanship under normal use for one (1) year from the date of purchase when used within the limits set forth in the Specifications section of the User Guide, and (b) the software components will perform substantially in accordance with Asoka’s published specifications for ninety (90) days from the date of purchase, but does not warrant that the software will be error-free or free of all defects. Should a product fail to perform as described in the User Guide within the warranted period, it will be repaired or replaced with the same or functionally equivalent product by Asoka, at its discretion, free of charge provided that you: (a) return the failed product to an Asoka designated repair facility with shipping charge prepaid, and (b) provide Asoka with proof of the original date of purchase. Repaired or replacement products will be returned to you with shipping charges prepaid. Asoka warrants any replaced or repaired product or component for the remainder of the initial warranty period whichever is longer. Replacement products may be refurbished or contain refurbished materials or components. If Asoka, by its sole determination, is unable to restore the product to proper operating condition, it will refund the depreciated purchase price of the product. This warranty extends only to you, the original purchaser and is not transferable to any subsequent purchasers. Warranty is void on products purchased or used outside the United States and Canada. This warranty does not apply if, in the judgment of Asoka, the product fails due to damage from shipment, handling, storage, accident, abuse, misapplication or misuse, or if it has been used or maintained in a manner not conforming to product manual instructions, has been modified in any way, or has had any serial number removed or defaced. Repair by anyone other than Asoka or an approved agent will void this warranty. The maximum liability of Asoka under this warranty is limited to the purchase price of the product covered by the warranty. Prior to returning any defective product, the purchaser or the authorized merchant from whom the purchaser originally bought the product must obtain a Return Material Authorization (RMA) number from Asoka. All defective products should be returned to Asoka with shipping charges prepaid. Asoka will not accept collect shipments. WHILE ASOKA HAS MADE EVERY EFFORT TO PROVIDE CLEAR AND ACCURATE TECHNICAL INFORMATION ABOUT ITS PRODUCTS, ASOKA ASSUMES NO LIABILITY FOR ANY EVENTS ARISING OUT OF THE USE OF THE TECHNICAL INFORMATION OR THE PRODUCT. EXCEPT AS SPECIFICALLY PROVIDED IN THIS AGREEMENT OR AS REQUIRED BY LAW, THE WARRANTIES AND REMEDIES STATED ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHERS, ORAL OR WRITTEN, EXPRESS OR IMPLIED. ANY AND ALL OTHER WARRANTIES, INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS ARE EXPRESSLY EXCLUDED. NEITHER ASOKA NOR BELLSOUTH SHALL BE LIABLE, UNDER ANY CIRCUMSTANCES, TO ANY PERSON OR ENTITYFOR ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, DAMAGES RESULTING FROM THE USE OR MALFUNCTION OF THE PRODUCTS, LOSS OF PROFITS OR REVENUES, BUSINESS INTERRUPTION, OR COSTS OF REPLACEMENT GOODS, EVEN IF ASOKA OR BELLSOUTH IS INFORMED IN ADVANCE OF THE POSSIBILITY OF SUCH DAMAGES. 7HFKQLFDO6XSSRUW,QIRUPDWLRQ- Online knowledgebase and FAQs - Support contact:1-888-ASOKAUSA(276 2587); support@asokausa.com © 2007 Asoka USA Corporation. PlugLink, Asoka and the Asoka logo are registered trademarks or trademarks of Asoka USA Corporation. Information is subject to change without notice. All rights reserved.
Asoka USA Corporation 558 Pilgrim Drive Ste H Foster City CA 94404 Sales: (650) 286-1700; sales@asokausa.comSupport: 1-888-ASOKAUSA(276-5287); support@asokausa.comURL: www.asokausa.com

Navigation menu