ASUSTeK Computer AAM6KVIT4 ADSL WIRELESS MODEM ROUTER User Manual manual
ASUSTeK Computer Inc ADSL WIRELESS MODEM ROUTER manual
USERS MANUAL
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 600818 |
| Application ID | d6qFyr5Btog//oo1MaLldg== |
| Document Description | USERS MANUAL |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 175.87kB (2198404 bits) |
| Date Submitted | 2005-11-09 00:00:00 |
| Date Available | 2005-12-18 00:00:00 |
| Creation Date | 2005-11-02 10:10:34 |
| Producing Software | Acrobat Distiller 5.0.5 (Windows) |
| Document Lastmod | 2005-11-02 10:10:34 |
| Document Title | manual.pdf |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | Weng |
AAM6020VI ADSL Wireless Modem Router Quick Installation Guide Quick Installation Guide ASUS® AAM6020VI ADSL Wireless Modem Router ¾ ¾ ¾ Do not open the housing! Use only the power supply provided with this device. Use only the cables provided with this device and do not perform any modification on them. Rev 1.0 Nov, 23, 2004 P/N: 15-0680980F0 Page AAM6020VI ADSL Wireless Modem Router Quick Installation Guide Before you begin Before installing your ADSL wireless modem router, please carefully check the following requirements with your computer. This ADSL wireless modem router is equipped with four 10/100Mbps RJ-45 Ethernet switch ports and 802.11g wireless Access Point. You can connect to the modem by Ethernet or wireless interface. Unpacking and Inspection Verify following items came with your ADSL Modem: AAM6020VI unit RJ-11 ADSL phone cable RJ-45 UTP cable Quick Installation Guide Power adapter and splitter Note: If any items are missing or damaged, please contact your local Sales Office for service. System Requirements IBM compatible, Macintosh or other OS-independent workstation supports TCP/IP. An Ethernet port supports 10Mbps or 10/100Mbps TCP/IP connection on your PC. For system configuration using the supplied web-based program: a web browser such as Internet Explorer v5.5 or later A wireless interface has installed properly on your PC, and it must support IEEE 802.11b or 802.11g wireless standard interface. You can connect any one of modem four switch ports on the rear panel to PC NIC Ethernet port. If you want to allow multiple computers (more than four PCs) to enjoy internet through ADSL Modem, please purchase a hub/switch to link directly to Ethernet port. You can contact your internet service provider to get more information on this. Caution: 1. If you want to use private Ethernet UTP cable linking between wireless modem router with PC, please make sure that cable quality must conform to Cat.5 upward and cable’s length can’t exceed over 100 meters. 2. Please make sure that wireless modem router’s wireless signal could be accessed by wireless interface on PC, and without any interference by electromagnetic wave device or obstacle around the corner. Page AAM6020VI ADSL Wireless Modem Router Quick Installation Guide Getting Started Hardware Installation Please follow the steps in the sequence outlined below. Fail to do so could result in damage of your ADSL wireless modem. Step 1: Connect a RJ-11 cable from wall phone jack to the connector “LINE” on the back of the modem. Step 2: Connect the AC adapter to the modem by inserting the barrel-shaped connector into the mating power connector on the back of the modem, and plug in the adapter to a wall outlet or a power strip. Step 3: Connect any LAN port on the back of the modem with a UTP cable, and other end of UTP cable directly link to RJ-45 port of your PC’s network card. Step 4: Power on your PC and modem, now you are ready to configure PC. Note: You can also use wireless interface to configure your modem, then please directly proceed step 4 and make sure your wireless card driver has been installed properly. Caution: Please do not power on your PC and modem before connecting steps are finished as mentioned above. Page AAM6020VI ADSL Wireless Modem Router Quick Installation Guide 1. Configuring Your Computers 1.1 Using Wired or Wireless Network Interface Card Before you start to access AAM6020VI via Ethernet or Wireless, please configure your PC’s TCP/IP address to be 192.168.1.x, where x could be any number between 2 to 254, subnet mask is 255.255.255.0, and Default gateway is 192.168.1.1 which is default IP address of ADSL modem. Note: By default, the router of modem’s DHCP server is enabled, you can obtain an IP address automatically once you’ve configured your PC to “obtain an IP address automatically”. If you have configured PC’s to DHCP client, it is not necessary to input IP address manually. But you must make sure without two DHCP servers existing in the same LAN before your PC receive IP. Windows® XP PCs: 1. In the Windows task bar, click the Start button, and then click Control Panel. 2. Double-click the Network Connections icon. 3. In the LAN or High-Speed Internet window, right-click on icon corresponding to your network interface card (NIC) and select Properties. (Often this icon is labeled Local Area Connection). The Local Area Connection dialog box displays with a list of currently installed network items. 4. Ensure that the check box to the left of the item labeled Internet Protocol (TCP/IP) is checked, and click Page 5. AAM6020VI ADSL Wireless Modem Router Quick Installation Guide In the Internet Protocol (TCP/IP) Properties dialog box, click the radio button labeled Use the following IP address and type 192.168.1.x (192.168.1.20 is shown below as an example), 255.255.255.0 and 192.168.1.1 in the IP address field, Subnet Mask field and Default gateway, respectively. TCP/IP Property @ Windows XP 6. Click twice to confirm your changes, and close the Control Panel. Windows® 2000 PCs: 1. In the Windows task bar, click the Start button, point to Settings, and then click Control Panel. 2. Double-click the Network and Dial-up Connections icon. 3. In the Network and Dial-up Connections window, right-click the Local Area Connection icon, and then select Properties. The Local Area Connection Properties dialog box displays with a list of currently installed network components. If the list includes Internet Protocol (TCP/IP), the protocol has already been enabled, please skip to step 10 directly. 4. If Internet Protocol (TCP/IP) does not display as an installed component, click 5. In the Select Network Component Type dialog box, select Protocol, and then click 6. Select Internet Protocol (TCP/IP) in the Network Protocols list, and then click You may be prompted to install files from your Windows 2000 installation CD or other media. Follow the instructions to install the files. 7. If prompted, click to restart your computer with the new settings. Page 8. 9. AAM6020VI ADSL Wireless Modem Router Quick Installation Guide After restarting your PC, double-click the Network and Dial-up Connections icon in the Control Panel. In Network and Dial-up Connections window, right-click the Local Area Connection icon, and then select Properties. 10. In the Local Area Connection Properties dialog box, select Internet Protocol (TCP/IP), and then click 11. In the Internet Protocol (TCP/IP) Properties dialog box, click the radio button labeled Use the following IP address and type 192.168.1.x, 255.255.255.0 and 192.168.1.1 in the IP address field, Subnet Mask field and Default gateway, respectively. 12. Click twice to confirm and save your changes, and then close the Control Panel. Windows® Me PCs 1. In the Windows task bar, click the Start button, point to Settings, and then click Control Panel. 2. Double-click the Network and Dial-up Connections icon. 3. In the Network and Dial-up Connections window, right-click the Network icon, and then select Properties. The Network Properties dialog box displays with a list of currently installed network components. If the list includes Internet Protocol (TCP/IP), the protocol has already been enabled, please skip to step 11 directly. 4. If Internet Protocol (TCP/IP) does not display as an installed component, click 5. In the Select Network Component Type dialog box, select Protocol, and then click 6. Select Microsoft in the Manufacturers box. 7. Select Internet Protocol (TCP/IP) in the Network Protocols list, and then click You may be prompted to install files from your Windows Me installation CD or other media. Follow the instructions to install the files. 8. If prompted, click 9. After restarting your PC, double-click the Network and Dial-up Connections icon in the Control Panel. to restart your computer with the new settings. 10. In Network and Dial-up Connections window, right-click the Network icon, and then select Properties. 11. In the Network Properties dialog box, select TCP/IP, and then click 12. In the TCP/IP Settings dialog box, click the radio button labeled Use the following IP address and type 192.168.1.x, 255.255.255.0 and 192.168.1.1 in the IP address field, Subnet Mask field and Default gateway, respectively. 13. Click twice to confirm and save your changes, and then close the Control Panel. Windows® 95, 98 PCs: 1. In the Windows task bar, click the Start button, point to Settings, and then click Control Panel. Page AAM6020VI ADSL Wireless Modem Router Quick Installation Guide 2. Double-click the Network icon. The Network dialog box displays with a list of currently installed network components. If the list includes TCP/IP, the protocol has already been enabled. Please skip to step 9 directly. 3. If TCP/IP does not display as an installed component, click Type dialog box will display. 4. Select Protocol, and then click . Then Select Network Component The Select Network Protocol dialog box displays. 5. Click on Microsoft in the Manufacturers list box, and then click TCP/IP in the Network Protocols list box. 6. Click to return to the Network dialog box, and then click again. You may be prompted to install files from your Windows 95/98 installation CD. Follow the instructions to install the files. 7. Click 8. After restarting your PC, open the Control Panel window, and then click the Network icon. 9. Select the network component labeled TCP/IP, and then click to restart the PC and complete the TCP/IP installation. If you have multiple TCP/IP listings, select the listing associated with your network card or adapter. 10. In the TCP/IP Properties dialog box, click the IP Address tab. 11. Click the radio button labeled Use the following IP address and type 192.168.1.x, 255.255.255.0 and 192.168.1.1 in the IP address field, Subnet Mask field and Default gateway, respectively. 12. Click click twice to confirm and save your changes. You will be prompted to restart Windows. Please and restart your PC again. Windows® NT 4.0 workstations: 1. In the Windows NT task bar, click the Start button, point to Settings, and then click Control Panel. 2. In the Control Panel window, double click the Network icon. 3. In the Network dialog box, click the Protocols tab. The Protocols tab displays a list of currently installed network protocols. If the list includes TCP/IP, the protocol has already been enabled. Please skip to step 9 directly. 4. If TCP/IP does not display as an installed component, click 5. In the Select Network Protocol dialog box, select TCP/IP, and then click You may be prompted to install files from your Windows NT installation CD or other media. Follow the instructions to install the files. After all files are installed, a window displays to inform you that a TCP/IP service called DHCP can be set up to dynamically assign IP information. Page AAM6020VI ADSL Wireless Modem Router Quick Installation Guide 6. Click to continue, and then click if prompted to restart your computer. 7. After restarting your PC, open the Control Panel window, and then double-click the Network icon. 8. In the Network dialog box, click the Protocols tab. 9. In the Protocols tab, select TCP/IP, and then click 10. In the Microsoft TCP/IP Properties dialog box, click the radio button labeled Use the following IP address and type 192.168.1.x, 255.255.255.0 and 192.168.1.1 in the IP address field, Subnet Mask field and Default gateway, respectively. 11. Click twice to confirm and save your changes, and then close the Control Panel. 1.2 Building Wireless Connection Using A Wireless Interface Most steps for accessing the modem are very similar to configure the wired NIC. Only difference with wired NIC is that your wireless card has built wireless connection with modem already. We will describe detailed linking and configuring steps, and take ASUS WL-100G 802.11G wireless card for example as below. 1. Please make sure that you have well-installed wireless card driver and utility into your PC. 2. Run ASUS WLAN Control Center, you will find ASUS WLAN Setting screen. 3. Click Survey icon on left column of Setting screen, you will find ADSL_Wireless - modem default SSID setting to be showed on Available Network. Select ADSL_Wireless , than click Connect. Page AAM6020VI ADSL Wireless Modem Router Quick Installation Guide 4. Click Status icon, then click IP Config to check IP address among 2~254 range. If it is true, then click Ping tab and run ping to do connection test between modem with your PC. Page AAM6020VI ADSL Wireless Modem Router Quick Installation Guide After finishing above steps, you are ready to login and start to configure modem now. Page 10 AAM6020VI ADSL Wireless Modem Router Quick Installation Guide 2. Configuring Wireless Modem Router 2.1 Internet connection with NAT function: Please enter the modem’s default IP address http://192.168.1.1 into your PC’s web browser and press Enter button on keyboard. The Login screen will show as below, following enter Admin for Username and Admin for Password then click on Log In button. 2.2 The ADSL modem home page will show as below, and it is divided into seven sections Ϋ HOME, SETUP, ADVANCED, WIRELESS, TOOLS, STATUS and HELP. Page 11 AAM6020VI ADSL Wireless Modem Router Quick Installation Guide 2.3 Click SETUP tab. 2.4 Click Firewall/NAT Services icon to select Enable Firewall and NAT Service, then click on Apply tab. Now re-login modem again. Page 12 AAM6020VI ADSL Wireless Modem Router Quick Installation Guide 2.5 Click SETUPÆNew Connection tab. 2.6 Input data Name column: It could be inputted anything you prefer. Type: There are listed five selections which you can choose from Type item Ϋ PPPoE, PPPoA, Static, DHCP and Bridge. Please select correct item which ISP gave you PPP Settings: Options: Select both NAT and Firewall functions. Encapsulation: Please select correct encapsulation from your ISP, but it is except for PPPoE. Username: Please input correct username which ISP gave you. Password: Please input correct password which ISP gave you. Keep Alive: Keep the default setting. If you want to change it, please input any number you prefer. MTU: Keep the default setting. If you want to change it, please get the correct number from your ISP. On Demand: If you have linking time-to-cost issue, please select this item and input number into Idle Timeout column you prefer. PVC Settings: VPI: Please input correct number which ISP gave you. VCI: Please input correct number which ISP gave you. Page 13 AAM6020VI ADSL Wireless Modem Router Quick Installation Guide QoS: Keep the default setting. Auto PVC: You also use this function to get correct VPI/VCI instead of inputting manually. Please click on Apply icon. 2.7 Go to the Status tab, then click on Connection Status. Under State of Connection Status, your WAN connection is now connected and you should be able to link to enjoy internet services. Page 14 AAM6020VI ADSL Wireless Modem Router Quick Installation Guide 2.8 Click on Tools tab, then select System Commands. Please click on Save All, all of your changes on settings will be saved into this unit; if you don’t run Save All process, you will lose all changes you did once power off or restart modem. Page 15 AAM6020VI ADSL Wireless Modem Router Quick Installation Guide 3. Performing a Factory Reset There are two methods to perform a factory default settings on this unit Ϋ by software management or reset manually. 3.1 Software Management: Please first login into this unit using Username and Password, click on Tools Æ System Commands. You will find a Restore Defaults tab is showed on the screen. Use this button to restore factory default configurations. Connectivity to the unit will be lost, you can build reconnection after the unit reboots. 3.2 Reset Manually: If you experience extreme problem or forgot your password, please press the reset button with a pencil tip till the status led goes off, then release the reset button. After 20 seconds, the led will come back on and all of settings will become to factory defaults. Page 16 AAM6020VI ADSL Wireless Modem Router Quick Installation Guide Front panel system messages The following illustration shows the front panel of the ADSL Wireless Modem Router. LED Indicators The ADSL Wireless Modem Router is equipped with LEDs on the front panel as described in the table below. (from left to right) Label Color Status Description POWER Red STATUS Blue LINE Blue On Off On Flashing Off Flashing Modem is powered ON Modem is powered OFF ADSL link is established and active Try to establish an ADSL connection No ADSL link Data transfer over ADSL line TEST LAN 1~4 N/A Blue WLAN Blue N/A On Flashing Off On Off Status testing LAN link is established Data transfer at LAN connection No LAN link Wireless AP is ON Wireless AP is OFF Page 17 AAM6020VI ADSL Wireless Modem Router Quick Installation Guide Rear panel system messages The following illustration shows the rear panel of the ADSL Wireless Modem Router. Outlet The ADSL Wireless Modem Router is equipped with outlets on the rear panel as described in the table below. Label Function LINE RJ-11 outlet, for ADSL line connector RESET/DEFAULT Reset modem configuration to factory default settings LAN 1~4 RJ-45 outlet for PC Ethernet port or hub/switch LAN connector POWER For supplied power adapter connector POWER SWITCH Power ON/OFF modem ===== End of AAM6020VI Quick Installation Guide ===== Page 18 Appendix FCC Warning Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with thelimits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --- Reorient or relocate the receiving antenna. --- Increase the separation between the equipment and receiver. --- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --- Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device and its antenna(s) must not be co-located or operating in onjunction with any other antenna or transmitter To maintain compliance with FCC’s RF exposure guidelines, this equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Use on the supplied antenna. Declaration of Conformity for R&TTE directive 1999/5/EC Essential requirements – Article 3 Protection requirements for health and safety – Article 3.1a Testing for electric safety according to EN 60950 has been conducted. These are considered relevant and sufficient. Protection requirements for electromagnetic compatibility – Article 3.1b Testing for electromagnetic compatibility according to EN 301 489-1 and EN 301 489-17 has be en conducted. These are considered relevant and sufficient. Effective use of the radio spectrum – Article 3.2 Testing for radio test suites according to EN 300 328 has been conducted. These are considered relevant and sufficient. CE Mark Warning This is a Class B product, in a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Create Date : 2005:11:02 10:10:34+08:00 Modify Date : 2005:11:02 10:10:34+08:00 Page Count : 20 Creation Date : 2005:11:02 02:10:34Z Mod Date : 2005:11:02 02:10:34Z Producer : Acrobat Distiller 5.0.5 (Windows) Author : Weng Metadata Date : 2005:11:02 02:10:34Z Creator : Weng Title : manual.pdfEXIF Metadata provided by EXIF.tools