ASUSTeK Computer AIGURUS2 WIRELESS SKYPE PHONE User Manual USERS MANUAL 1

ASUSTeK Computer Inc WIRELESS SKYPE PHONE USERS MANUAL 1

Contents

USERS MANUAL 1

AiGuru S2Wireless Skype Phone
iiE2944 First edition V1Copyright © 2006-2007 ASUSTeK COMPUTER INC. All Rights Reserved.No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identication or explanation and to the owners’ benet, without intent to infringe.
iiiSafety precautionsFor your safety and to keep your phone in good operating condition, read the following tips and reminders carefully before using your phone.Always keep the phone dry and free from dust.Make sure that the phone is switched off before removing/replacing the battery.Refer phone servicing only to qualied personnel.Use only approved accessories. Do not connect incompatible products or devices.Use the phone following the instructions in this user guide.Refer to the Appendix for detailed safety notices.
ivTable of contentsSafety precautions ........................................................................................iiiAbout this guide ............................................................................................viiConventions used in this guide ...................................................................viiiWelcome .........................................................................................................ixPackage contents ..........................................................................................xiSystem requirements ....................................................................................xiiSpecications ................................................................................................xiiChapter 1: Basic information1.1 Phone layout ..................................................................................1-21.2 Battery information .......................................................................1-41.2.1 Battery power levels .............................................................1-41.2.2 Removing and installing the battery .....................................1-41.2.3 Charging the battery ............................................................1-61.2.4 Turning the phone on or off ..................................................1-71.2.5 Display layout .......................................................................1-7Chapter 2: Installing and using the AiGuru S2 Utility2.1 Installing the AiGuru S2 Utility .....................................................2-22.2 Optimizing the AiGuru S2 Utility settings ...................................2-102.2.1 Status ...................................................................................2-112.2.2 WiFi Music Settings .............................................................2-132.2.3 Handset Mode Switch and WiFi Congure ..........................2-15
vTable of contentsChapter 3: Getting to know the phone menu and using the Skype™ features3.1 Skype ..............................................................................................3-23.1.1 Making a call ........................................................................3-23.1.2 Hang up a call ......................................................................3-43.1.3 Conference call ....................................................................3-43.1.4 Presence ..............................................................................3-63.1.5 Skype Voicemail ...................................................................3-73.1.6 Chat Alert .............................................................................3-93.2 Call List...........................................................................................3-103.3 MyProle .......................................................................................3-123.4 WiFi Music ......................................................................................3-133.4.1 Play mode ............................................................................3-133.4.2 Sound mode .........................................................................3-143.5 System info. ...................................................................................3-153.5.1 WiFi Status ...........................................................................3-153.5.2 Mac Address ........................................................................3-163.5.3 Firmware Version .................................................................3-163.6 Settings ..........................................................................................3-173.6.1 Language .............................................................................3-173.6.2 Display .................................................................................3-183.6.3 Keypad Lock ........................................................................3-203.6.4 Load Default .........................................................................3-20
viTable of contentsAppendix: Reference informationA.1 Setting PC-cillin™ .........................................................................A-2A.2 Notices............................................................................................A-6A.3 Safety statements ..........................................................................A-7A.4 Troubleshooting ............................................................................A-16A.5 FAQ .................................................................................................A-17ASUS contact information ............................................................................A-21
viiAbout this guideThis user guide contains the information you need to use your AiGuru S2 phone.How this guide is organizedThis user guide contains the following parts:Chapter 1: Basic informationThis chapter describes the phone layout, provides information about the battery including how to charge it, and basic functions such as locking/unlocking the keypad and turning the phone on/off. This chapter also describes the different layout displays of the phone.Chapter 2: Installing and using the AiGuru S2 UtilityThis chapter provides instructions on how to install the AiGuru S2 Utility and the required device drivers. This chapter also shows you how to use the AiGuru S2 utility.Chapter 3: Getting to know the phone menu and using the Skype™ featuresThis chapter shows you how to use the phone and navigate through the Phone Menu and the Skype™ Menu.Appendix: Reference informationThis chapter describes PC-cillin rewall settings and provides safety notices, an FAQ section, as well as ASUS’ contact information.
viiiConventions used in this guideTo make sure that you peform certain tasks properly, take note of the following conventions used throughout this user guide.NOTE: Tips and information to aid in completing a task.IMPORTANT: Instructions that you MUST follow to complete a task.CAUTION: Information to prevent injury to yourself when trying to complete a task.WARNING: Information to prevent injury to the unit when trying to complete a task.NETWORK DEPENDENT/SUBSCRIBED FEATURE: The phone feature is network dependent or subscribed.
ixSkype™ is a registered trademark of Skype™ Technologies S.A. and is not in any way connected to ASUSTek Computer, Inc. To create an account, download the Skype™ program, and know more about this program, visit www. skype.com.WelcomeThank you for choosing the ASUS AiGuru S2 Wireless Skype Phone Kit. It will allow you to make phone using your broadband connection. This Phone is specially designed to facilitate the manipulation of the service and features provided by SkypeTM. What is SkypeTM SkypeTM is free and simple software that enables you to make free calls anywhere in the world in minutes. If you are tired of paying outrageous fees for telephony, SkypeTM is for you! SkypeTM is quick and easy to install. Just download it, register, and within minutes you can use the ASUS AiGuru S2 Wireless Skype Phone to call your friends on SkypeTM. SkypeTM calls have excellent sound quality and are highly secure with end-to-end encryption. Best of all, SkypeTM does not require you to recongure your rewall or router - it just works! SkypeTM is a registered trademark of Skype Technologies S.A. and all rights related to it are reserved. It is not in any way connected to ASUSTek Computer, Inc. To create an account, download the SkypeTM program, and know more about this program, visit www.skype.com. “Get AiGuru S2 Phone convenience when you use SkypeTM! Now you do not have to sit in front of your computer when you want to talk to your friends. With the Skype application running on your PC, the handset can read and display your contact list on its built-in illuminated display. Just choose who you want to talk to from the menu, press a button, and get ready to talk.
xOf course, the handset supports SkypeOutTM dialing as well as your Skype contact list. The handset rings when you have a SkypeTM or SkypeInTM call coming in, and shows the caller’s ID on the screen. You can hit the Mute button for privacy, or use the loud-speaker function to let everyone join in. You can put an existing call on hold and allow callers to leave a message on the answer machine, and retrieve voice mail with ease.In short, the ASUS AiGuru S2 Wireless Skype Phone Kit gives you all the functionality of a regular phone, through SkypeTM. You get the convenience of a wireless phone and all its features, plus the high-quality voice reception that you get from SkypeTM on your PC, without being tied to your computer
xiPackage contentsCheck your phone package for the following items:AiGuru S2 phone User manual Quick Start GuideWireless Link USB dongle extension Battery Support CDWireless Link USB dongleUSB cable
xiiSystem requirements• PC running Microsoft® Windows® XP (SP2) / 2000 (SP4)• At least 1 GHz processor• At least 256 MB RAM• At least 40 MB free hard disk drive space• Internet connection: Dial-up, broadband, or cable modem (at least 33.6 Kbps)We recommend a broadband connection. Voice quality may vary depending on the connection speed.)• Skype™ version 3.0.0.198 recommended (bundled in the support CD)SpecicationsDimension 116(L) x 47(W) x 12.3(H) mm Weight 100 gWireless standard IEEE 802.11 b+g @11/54 Mbps, 2.4 GHz, with auto-fallback and auto-channel selectionI/O 128 x 128 Dot matrix STNLCD 0.5 W Speaker Receiver Mini USB port 2.5 mm 2-channel Earphone jackKeypad Alphanumeric keys End key Call key Navigation keys Right soft key Left soft key Asterisk key(Continued on the next page)
xiiiFeatures Skype™, SkypeIn™, SkypeOut™, Skype™ Conference support Contacts list, call list Search Call rejecting, call receiving, call redial, hold Hands-free speaker out Caller ID displayOperating distance Indoors: 30 m* Outdoors: 100 m*Power duration Li-ion 3.7 V 750 mAH, 25 hours standby, 2.5 talk hoursCharging 3 hours USB full chargingWireless receiver Wireless Link dongle (UI) mounted on the PC or notebookSofware to install AiGuru S2 Utility Wireless Link dongle driverAccessories Support CD User Manual Quick Start Guide Battery USB cable Wireless Link dongle Wireless Link dongle 3D 180º USB extensionSpecications* According to free space test. The operating distance may be shorter or interfered if there are walls, barriers, or interferences in the home layout or operating environment.
xiv
Chapter 1Basic informationThis chapter describes the phone layout, provides information about the battery including how to charge it, and basic functions such as locking/unlocking the keypad and turning the phone on/off. This chapter also describes the different layout displays of the phone.
1-2 Chapter 1: Basic information1.1 Phone layoutFront view1. Earpiece/Speaker2. LCD screen. Displays information such as time, battery status, signal strength, and menus.3. Navigation keys. Allows you to navigate menu lists.4. Left soft key. Allows you to perform the function indicated on the bottom left corner of the screen.5. Call key. Initiates a call.6. Asterisk key. Holds to chage the input modes.Back view1223451011189767
1-3AiGuru S2 Wireless Skype Phone7. Microphone8. Right soft key. Allows you to perform the function indicated on the bottom right corner of the screen.9. End key. Terminates a call.10. Alphanumeric keypad. Allows you to enter numbers, letters, and symbols.11. Battery latch. Secures the battery cover to the phone.12. Battery cover. Covers the battery.Side view (left) Side view (right)13 1413. Volume adjustment buttons. Adjusts the phone volume.14. Power button. Turns the phone on or off.15. Earphone jack. Connects an earphone.Bottom view 16. USB B type connector. Connects a USB B series plug to charge the phone battery and congure the phone.1615
1-4 Chapter 1: Basic information1.2 Battery informationA rechargeable battery powers the AiGuru S2 Wireless Skype Phone. Make sure that the battery is fully charged to prevent interrupted communications due to power loss.Fully charge the lithium ion battery before rst use and whenever it is depleted to prolong battery life.Icon IndicationBattery is 55% to 100% full.Battery is 25% to 55% full.Battery is 10% to 25% full.Turning red. Battery has no power. Charging is required.1.2.2 Removing and installing the batteryThe rechargeable battery comes installed in the AiGuru S2. In the future, you may need to replace the current battery. Follow the instructions in this section to remove and install the battery if needed.Before removing or installing the battery, make sure the phone is turned off and not connected to a USB cable.1.2.1 Battery power levelsThe battery icon on the LCD screen helps you keep track of the remaining battery power so you will know when you need to charge the battery. Note the battery icon indicating the battery power levels.
1-5AiGuru S2 Wireless Skype Phone2. Slide the battery cover in the direction of the arrow until the latch snaps in place.To install the battery:1. Place the battery into the battery compartment noting the correct polarity.2. Upwardly lift the battery and set it aside To remove the battery:1. Push the battery cover latch in the direction of the arrow until the battery cover disengages from the phone. Lift the cover then set it aside
1-6 Chapter 1: Basic information1.2.3 Charging the batteryLow battery indicatorThe battery indicator on the upper left corner of the screen indicates how much charge remains in the battery. When the battery indicator shows (red), you need to recharge the battery. Charge the battery through the USB cable.USB direct charging1. Connect the USB Series B plug (with the squarish end) to the port at the bottom of the phone.2. Connect the USB Series A plug (with the at rectangular end) to a USB 2.0 port on your computer.Make sure your computer is turned on.For the best battery performance, make the battery charge and discharge completely the rst few times you use it.To know the charging status of the phone, note the LED color on the upper left corner of the handset. Refer to the table below.Color IndicationOrange (blinking) Battery chargingGreen (blinking slowly) Idle mode (backlight is off)No color (LED off) Phone in use
1-7AiGuru S2 Wireless Skype Phone1.2.4 Turning the phone on or offTo turn the phone on or off:1. Locate the power button on the right side of the phone.2. Press the power button for a few seconds until the display turns on or off.1.2.5 Display layoutIdle modeThe phone is in idle mode when it is ready for use and you have not performed any action.WiFi Signal strength indicatorMain menu selectionClockSkype creditAccount nameBattery indicatorSkype statusSkype Contacts listWhen you switch to USB Mode, the WiFi Signal strength indicator icon will change to . Refer to 2.2.3 for detailed information on handset mode switch.
1-8 Chapter 1: Basic informationMain menuAfter you press the left soft key, the main menu appears. You can navigate to Skype, Call List, MyProle, Settings, System Info., WiFi Music to use all the functions or congure the settings.My ProleSettingsSkypeWiFi MusicSystem Info.Call ListWhen you logged off Skype, switch to USB Mode, or disconnect the connection, some icons in the main menu will be gray out.
Chapter 2Installing and using the AiGuru S2 UtilityThis chapter provides instructions on how to install the AiGuru S2 Utility and the required device drivers. This chapter also shows you how to congure the phone and Wireless Link USB dongle.
2-2 Chapter 2: Installing and using the AiGuru S2 Utility2.1 Installing the AiGuru S2 UtilityBefore using your AiGuru S2 Wireless Skype Phone, you need to install the AiGuru S2 Utility. This utility allows you to take full advantage of your phone’s features. Requirements for installing the AiGuru S2 utility:1. Windows® XP (SP2) / 2000 (SP4) operating system2. At least 1 GHz processor3. At least 256 MB RAM4. At least 40 MB free hard disk drive space5. Internet connection: Dial-up, broadband, or cable modem (at least 33.6 Kbps)6. Skype™ account7. Microsoft® DirectX 9.0c8. AiGuru S2 support CDConsult the Internet Service Provider(ISP) for detailed information about network setting.
2-3AiGuru S2 Wireless Skype PhoneTo install the AiGuru S2 Utility:1. Place the AiGuru S2 support CD in the optical drive. The AiGuru S2 Control Panel appears. Click Install AiGuru S2 Utility.2. Click Yes to start installation when the InstallShield Wizard appears.3. When the installation begins, the Setup Status window indicates the progress of installation.If the AiGuru S2 Utility installation does not run automatically, click Browse Support CD, then double click Setup.exe to run the installation or readme for help.
2-4 Chapter 2: Installing and using the AiGuru S2 Utility4. This screen appears when installation is completed. Refer to the following description to connect the Wireless Link USB dongle to your PC.Installation can not proceed if the Wireless Link USB dongle is not connected to your PC.To connect the Wireless Link USB dongle:You may plug the Wireless Link USB dongle to your PC directly or connect it to your PC with the Wireless Link USB dongle extension. See the pictures below:Method 1: Method 2: Wireless LinkWirel
2-5AiGuru S2 Wireless Skype PhoneThe Wireless Link USB dongle extension comes with the handset. You can adjust it up to 360º to get better signal.The Wireless Link USB dongle is a thumb-sized device that creates a wireless network using the IEEE 802.11g wireless standards. The device allows wireless communication between your computer and your phone using USB 2.0 connectivity, giving you the convenient access to the Skype™ program and control of the AiGuru S2 Utility. 1. Installation proceeds when you connect the Wireless Link USB dongle to your PC.2. This screen appears when installation is completed. Please turn on your handset and connect it to your PC using the provided USB cable.
2-6 Chapter 2: Installing and using the AiGuru S2 Utility2. The Skype™ Setup Wizard appears and leads you to nish the installation. Select the language to use rst.3. Read the License Agreement and then click the box, then click the Install button to install.1. A dialogue box opens, asking if you would like to install or update the Skype™ program. Click Yes to install the program.To install Skype™: We recommand you install the program in the Support CD or the programs suggested in ASUS website.
2-7AiGuru S2 Wireless Skype Phone4. If you want to install the free Google Toolbar please click the box before Install the free Google Toolbar, then click the Next button.5. Installation proceeds.6. This screen appears when installation is completed. Click the Start Skype.
2-8 Chapter 2: Installing and using the AiGuru S2 UtilityTo continue AiGuru S2 Utility installation1. InstallShield Wizard appears after you nish Skype installation. Select Yes, I want to restart my computer now and click Finish.2. After restarting the computer, when you log in to skype, a prompt appears. Select Allow this program to use Skype and click OK. The AiGuru S2 utility will be ready to use.3. The warning message appears on the utility screen, if the phone and the Wireless Link USB dongle are not connected to your PC, or the Skype application is not initiated. The warning messages disappear when everything is ready.
2-9AiGuru S2 Wireless Skype Phone4. Click the third button on the left to check if the WiFi congure is correct.5. When the conguration succeeds, the handset displays the information as the right picture, and is ready to use.If the connection fails, place the handset close to the Wireless Link USB dongle and try again.jb1127 on the phone display is the skype account name and it varies according to the user.
2-10 Chapter 2: Installing and using the AiGuru S2 UtilityTo launch the AiGuru S2 Utility:1. Turn on your phone.2. Connect the Wireless Link USB dongle to your computer.3. Start your computer.4. Launch the Skype application and log in to your skype account.5. Launch the AiGuru S2 Utility by double-clicking the AiGuru S2 Utility icon (with the image of this phone on your desktop or the taskbar. 6. The AiGuru S2 Utility main screen appears. Refer to the following section for details on how to customize the AiGuru S2 Utility.2.2 Optimizing the AiGuru S2 Utility settingsAfter installing the AiGuru S2 Utility and Wireless Link USB dongle device driver, it is time to customize the settings to optimize the features of your phone.
2-11AiGuru S2 Wireless Skype Phone2.2.1 StatusAiGurru S2 utility will auto-detect the phone status, as shown in the picture on the right.Click the button on the left to display the phone status.Item MessageUtility Version Displays the utility version you are using.Handset VerionDisplays the handset version. You can update the handset rmware by connecting the handset to the computer and click the Firmware Update button.Skype Skype application is (not) available.Wireless Link Dongle (not) connectedPhone Displays the mode you are in, WiFi Mode or USB Mode. Aslo it tells the handset is connected through the USB cable or not. is a warning message, indicating the Skype application is not initiated or the phone or the Wireless Link USB dongle is not detected. If icon appears, click the Diagnose button to nd out the problem.
2-12 Chapter 2: Installing and using the AiGuru S2 UtilityDuring the rmware updating, turning the handset off or removing the USB cable will seriously damage the handset. Firmware updateA gray-out Firmware Update button means that your AiGuru S2 uses the latest rmware. If not, follow the instructions below for rmware updating.Update the rmware to obtain the best performance and stablity.1. Connect your handset to your PC through the providing USB cable and click the Firmware Update button to apply the latest rmware for your handset.2. The warning messages appear Pleasedon’tremoveUSBcable.If you remove the USB cable, the warning messages appear Do not power off. 3. After the process is complete, follow the instruction to reboot the handset.
2-13AiGuru S2 Wireless Skype Phone2.2.2 WiFi Music SettingsClick the button on the left to open the WiFi Music Settings screen and to select the playlist you would like to listen to on your phone.1231. Media Player: Allows you to choose the media player you want from the drop-down menu. AiGuru S2 Utility supports Windows Media Player and iTunes.
2-14 Chapter 2: Installing and using the AiGuru S2 Utility2. Playlist: Allows you to create a new playlist, import an existed playlist that created from the AiGuru S2 utility, or delete an unwanted playlist. Create new playlist: Click the button New, and enter the new playlist name in the dialogue box.3. Playlist content: Allows you to easily drag and drop songs onto the list. You can also use the button below to add and remove a song from the list or clear the whole playlist at a time. Click the button Save to save your customized setup.Import a playlist: Click the button Import, and the Import a playlist screen appears.Locate the playlist you created earlier or the playlist you want to import and click Open.Delete a playlist: Click the button Delete, and a dialogue box appears, asking for conrmation. Click OK to delete the playlist in the disk.
2-15AiGuru S2 Wireless Skype Phone2.2.3 HandsetModeSwitchandWiFiCongureClick the button on the left to open the Handset Mode Switch and WiFi Conguration screen.Handset Mode SwitchYou can switch between WiFi Mode and USB Mode. The function of WiFi Music will be disabled when you are in USB mode.When you switch between WiFi Mode and USB Mode, please don’t unplug the handset until the conguration completed.
2-16 Chapter 2: Installing and using the AiGuru S2 UtilityWiFiCongureAfter the installation of AiGuru S2 utility and the Skype application, the handset should be ready to use. The system will automatically detect your phone setting if you restart your computer or replug the Wireless Link USB dongle.You need to click the AirCong button to reset the phone if you connect the phone to another computer or the IP address of your computer changes. You have to congure your phone and the AiGuru S2 utility. Make sure you’ve connected the dongle to your computer and the handset is turned on. Click the button Air Cong and hold the Call Key of the handset simutaneously. If the AirConig fails, refer to 2.2.1 Status to diagnose the problem.
Chapter 3Getting to know the phone menu and using the Skype™ featuresThis chapter shows you how to use the phone and navigate through the Phone Menu and the Skype™ Menu.
3-2 Chapter 3: Getting to know the phone menu and using the Skype™ features3.1 SkypeYour AiGuru S2 phone allows you to receive or make skype phone calls while you are away from your computer, within the operating range of the WLAN module3.1.1 Making a callBefore using your AiGuru S2 Wireless Skype Phone, make sure you have installed the AiGuru S2 Utility and congured the required settings. Do not quit the utility while you are signed in to Skype™. Refer to Chapter 2 for details. Using an entry in the Contact List:To make a call to a mobile phone or land line using SkypeOut™, you need to purchase credits. Visit the Skype™ website at www.skype.com for details. 1. From the idle screen, press the left soft key to display the main menu. and select Skype > Contacts. Or, press the right soft key to display the contacts directly.2. The contact list appears, sorted by SkypeOut number and Skype contacts.The phone book on your phone only displays the contacts saved in your Skype account.
3-3AiGuru S2 Wireless Skype Phone3. For SkypeOut number: 1. Scroll up/down to choose the SkypeOut number you want to call, and then press the Call Key to make the connection directly. For Skype contact: 1. Scroll up/down to choose the contact you want to call, and then press the Call Key to make the connection directly. 2. Or press the left soft key (Options) to SkypeOut Call. 2. To do it otherwise, press the left soft key (Options) to Call. 3. Also, you can SkypeOut your contact’s other phone numbers in the ViewProle menu. Scroll up/down to select the wanted number and press the left soft key (SkypeOut) or press the Call Key directly.
3-4 Chapter 3: Getting to know the phone menu and using the Skype™ features3.1.3 Conference callTo make a call using the numeric keypad:1. From the idle screen, dial the telephone number you want to connect.2. Press the left soft key (Save) to save the number; otherwise, press the right soft key (Delete) to delete the entry one by one.3. Press End Key to delete all entries and return to the idle screen. Or, press the Call Key to make the connection.3.1.2 Hang up a call:When you are done with the phone conversation, press End Key to terminate the call.Using the numeric keypad:1. From the idle screen, press the left soft key to display the main menu, and select Skype > Conference call.2. From the Conference Call screen, press the left soft key to select the conference participant. A check mark appears before the contact’s name or the SkypeOut number. Press twice to unselect the participant.
3-5AiGuru S2 Wireless Skype Phone3. Repeat the previous steps to add more conference participants.A conference call can include maximum one host and four participants.You have to unselect a participant before you add another new one if the participant number exceeds the limit.4. Press Call Key to start the connection.5. When you are done with the phone conversation, press End Key to terminate the call.During the call, you can switch between Loudspeaker mode and Handset mode for Handsfree function, or Mute the mircrophone so that others cannot hear you.
3-6 Chapter 3: Getting to know the phone menu and using the Skype™ features3.1.4 PresenceYou can change your Skype status through the handset remotely.1. From the idle screen, press the left soft key to display the main menu and select Skype > Presence. 2. Scroll up/down to choose the Skype status you want, and press the left soft key (Select) too make a conrmation, Ofine, Online, Skype me, Away, Not available, Do not disturb or Invisible.3. After the selection, the idle screen displays as shown.When you switch your status to Ofine, some Skype functions will be disabled, such as making calls.
3-7AiGuru S2 Wireless Skype Phone3.1.5 Skype VoicemailYou can download and listen to your Voicemail, or delete the Voicemail in a few steps.Play a Voicemail:1. From the idle screen, press the left soft key to display the main menu and select Skype > Skype Voicemail. 2. Use the navigation keys to nd the Voicemail you want from the list 3. Press the left soft key (Options) and select Play.
3-8 Chapter 3: Getting to know the phone menu and using the Skype™ features3. Press the left soft key (Options) and select Delete.Delete a/all Voicemail(s):1. From the idle screen, press the left soft key to display the main menu and select Skype > Skype Voicemail. 2. Use the navigation keys to locate the Voicemail you want to delete from the list. 4. A message appears, asking for conrmation. Press the left soft key (OK) to delete the selected Voicemail.5. To delete all Voicemails, repeat the previous instructions and select Delete All to clear all Voicemails.
3-9AiGuru S2 Wireless Skype Phone3.1.6 Chat AlertAfter activating Chat Alert function, an icon will appear on your handset display to remind you of an incoming text message on your PC with a beep when you are away chatting via AiGuru S2.To activate or inactivate Chat Alert:1. From the idle screen, press the left soft key to display the main menu and select Skype > Chat Alert. 2. Use the navigation keys and the left soft key to select On to start Chat Alert or Off to stop this function.After the text message is read, the icon on your handset display will disappear.When this function is disabled, there will be no reminder icon and alerting beep if a text message is coming to your PC.
3-10 Chapter 3: Getting to know the phone menu and using the Skype™ features3.2 Call ListDisplaying the Missed Call, Incoming Call, and Outgoing Call, the Call List menu is convenient for you to trace the history of all kinds of calls. 1. From the idle screen, press the left soft key to display the main menu and select Call List. 2. Use the navigation keys to highlight the type of call history you want to browse and press the left soft key to Enter. 3. Select a Missed/Incoming/Outgoing call entry and press the left soft key to call back.4. Or hightlight Details and press left soft key to check the call details.
3-11AiGuru S2 Wireless Skype Phone5. The information about the call will be displayed as shown.6. Or hightlight ViewProle and press left soft key to view the caller or the recipient’s prole.7. The prole of the caller or the recipient will be displayed as shown.When you checked the missed call, the call in the Missed Call will disappear and move to Incoming Call.
3-12 Chapter 3: Getting to know the phone menu and using the Skype™ features3.3 MyProleMy Prole menu lists detailed prole of your Skype account.1. From the idle screen, press the left soft key to display the main menu and select MyProle. 2. Scroll up and down using the navigation keys to view the prole. You are not allowed to make a Skype call to yourself. While browsing this menu, you can only SkypeOut to your home number, ofce number, or your mobile phone number. 3. Press the left soft key to SkypeOut to the phone number in your prole.

Navigation menu