ASUSTeK Computer AIGURUS2 WIRELESS SKYPE PHONE User Manual USERS MANUAL 2

ASUSTeK Computer Inc WIRELESS SKYPE PHONE USERS MANUAL 2

Contents

USERS MANUAL 2

AiGuru S2Wireless Skype Phone
iiE2944 First edition V1Copyright © 2006-2007 ASUSTeK COMPUTER INC. All Rights Reserved.No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identication or explanation and to the owners’ benet, without intent to infringe.
iiiSafety precautionsFor your safety and to keep your phone in good operating condition, read the following tips and reminders carefully before using your phone.Always keep the phone dry and free from dust.Make sure that the phone is switched off before removing/replacing the battery.Refer phone servicing only to qualied personnel.Use only approved accessories. Do not connect incompatible products or devices.Use the phone following the instructions in this user guide.Refer to the Appendix for detailed safety notices.
ivTable of contentsSafety precautions ........................................................................................iiiAbout this guide ............................................................................................viiConventions used in this guide ...................................................................viiiWelcome .........................................................................................................ixPackage contents ..........................................................................................xiSystem requirements ....................................................................................xiiSpecications ................................................................................................xiiChapter 1:  Basic information1.1  Phone layout ..................................................................................1-21.2  Battery information .......................................................................1-41.2.1  Battery power levels .............................................................1-41.2.2  Removing and installing the battery .....................................1-41.2.3  Charging the battery ............................................................1-61.2.4  Turning the phone on or off ..................................................1-71.2.5  Display layout .......................................................................1-7Chapter 2:  Installing and using the AiGuru S2 Utility2.1  Installing the AiGuru S2 Utility .....................................................2-22.2  Optimizing the AiGuru S2 Utility settings ...................................2-102.2.1  Status ...................................................................................2-112.2.2  WiFi Music Settings .............................................................2-132.2.3  Handset Mode Switch and WiFi Congure ..........................2-15
vTable of contentsChapter 3:  Getting to know the phone menu and    using the Skype™ features3.1  Skype ..............................................................................................3-23.1.1  Making a call ........................................................................3-23.1.2  Hang up a call ......................................................................3-43.1.3  Conference call ....................................................................3-43.1.4  Presence ..............................................................................3-63.1.5  Skype Voicemail ...................................................................3-73.1.6  Chat Alert .............................................................................3-93.2  Call List...........................................................................................3-103.3 MyProle .......................................................................................3-123.4  WiFi Music ......................................................................................3-133.4.1  Play mode ............................................................................3-133.4.2  Sound mode .........................................................................3-143.5  System info. ...................................................................................3-153.5.1  WiFi Status ...........................................................................3-153.5.2  Mac Address ........................................................................3-163.5.3  Firmware Version .................................................................3-163.6  Settings ..........................................................................................3-173.6.1  Language .............................................................................3-173.6.2  Display .................................................................................3-183.6.3  Keypad Lock ........................................................................3-203.6.4  Load Default .........................................................................3-20
viTable of contentsAppendix:  Reference informationA.1  Setting PC-cillin™ .........................................................................A-2A.2  Notices............................................................................................A-6A.3  Safety statements ..........................................................................A-7A.4  Troubleshooting ............................................................................A-16A.5  FAQ .................................................................................................A-17ASUS contact information ............................................................................A-21
viiAbout this guideThis user guide contains the information you need to use your AiGuru S2 phone.How this guide is organizedThis user guide contains the following parts:Chapter 1: Basic informationThis chapter describes the phone layout, provides information about the battery including how to charge it, and basic functions such as locking/unlocking the keypad and turning the phone on/off. This chapter also describes the different layout displays of the phone.Chapter 2: Installing and using the AiGuru S2 UtilityThis chapter provides instructions on how to install the AiGuru S2  Utility and the required device drivers. This chapter also shows you  how to use the AiGuru S2 utility.Chapter 3: Getting to know the phone menu and using the Skype™ featuresThis chapter shows you how to use the phone and navigate through the Phone Menu and the Skype™ Menu.Appendix: Reference informationThis chapter describes PC-cillin rewall settings and provides safety notices, an FAQ section, as well as ASUS’ contact information.
viiiConventions used in this guideTo make sure that you peform certain tasks properly, take note of the following conventions used throughout this user guide.NOTE: Tips and information to aid in completing a task.IMPORTANT: Instructions that you MUST follow to complete a task.CAUTION: Information to prevent injury to yourself when trying to complete a task.WARNING: Information to prevent injury to the unit when trying to complete a task.NETWORK DEPENDENT/SUBSCRIBED FEATURE: The phone feature is network dependent or subscribed.
ixSkype™ is a registered trademark of Skype™ Technologies S.A. and is not in any way connected to ASUSTek Computer, Inc. To create an account, download the Skype™ program, and know more about this program, visit www. skype.com.WelcomeThank you for choosing the ASUS AiGuru S2 Wireless Skype Phone Kit. It will allow you to make phone using your broadband connection. This Phone is specially designed to facilitate the manipulation of the service and features provided by SkypeTM.  What is SkypeTM SkypeTM is free and simple software that enables you to make free calls anywhere in the world in minutes. If you are tired of paying outrageous fees for telephony, SkypeTM is for you! SkypeTM is quick and easy to install. Just download it, register, and within minutes you can use the  ASUS AiGuru S2 Wireless Skype Phone to call your friends on SkypeTM. SkypeTM calls have excellent sound quality and are highly secure with end-to-end encryption. Best of all, SkypeTM does not require you to recongure your rewall or router - it just works! SkypeTM is a registered trademark of Skype Technologies S.A. and all rights related to it are reserved.  It is not in any way connected to ASUSTek Computer, Inc. To create an account, download the SkypeTM program, and know more about this program, visit www.skype.com.  “Get AiGuru S2 Phone convenience when you use SkypeTM! Now you do not have to sit in front of your computer when you want to talk to your friends. With the Skype application running on your PC, the handset can read and display your contact list on its built-in illuminated display. Just choose who you want to talk to from the menu, press a button, and get ready to talk.
xOf course, the handset supports SkypeOutTM dialing as well as your Skype contact list. The handset rings when you have a SkypeTM or SkypeInTM call coming in, and shows the caller’s ID on the screen. You can hit the Mute button for privacy, or use the loud-speaker function to let everyone join in. You can put an existing call on hold and allow callers to leave a message on the answer machine, and retrieve voice mail with ease.In short, the ASUS AiGuru S2 Wireless Skype Phone Kit gives you all the functionality of a regular phone, through SkypeTM. You get the convenience of a wireless phone and all its features, plus the high-quality voice reception that you get from SkypeTM on your PC, without being tied to your computer
xiPackage contentsCheck your phone package for the following items:AiGuru S2 phone User manual Quick Start GuideWireless Link USB dongle extension Battery Support CDWireless Link USB dongleUSB cable
xiiSystem requirements•  PC running Microsoft® Windows® XP (SP2) / 2000 (SP4)•  At least 1 GHz processor•  At least 256 MB RAM•  At least 40 MB free hard disk drive space•  Internet connection: Dial-up, broadband, or cable modem (at least 33.6 Kbps)We recommend a broadband connection. Voice quality may vary depending on the connection speed.)•  Skype™ version 3.0.0.198 recommended (bundled in the support CD)SpecicationsDimension 116(L) x 47(W) x 12.3(H) mm Weight 100 gWireless standard IEEE 802.11 b+g @11/54 Mbps, 2.4 GHz, with     auto-fallback and auto-channel selectionI/O 128 x 128 Dot matrix STNLCD 0.5 W Speaker Receiver Mini USB port 2.5 mm 2-channel Earphone jackKeypad Alphanumeric keys End key Call key Navigation keys Right soft key Left soft key Asterisk key(Continued on the next page)
xiiiFeatures Skype™, SkypeIn™, SkypeOut™, Skype™ Conference     support Contacts list, call list Search Call rejecting, call receiving, call redial, hold Hands-free speaker out Caller ID displayOperating distance Indoors:    30 m* Outdoors: 100 m*Power duration Li-ion 3.7 V 750 mAH, 25 hours standby, 2.5 talk hoursCharging 3 hours USB full chargingWireless receiver Wireless Link dongle (UI) mounted on the PC or notebookSofware to install AiGuru S2 Utility Wireless Link dongle driverAccessories Support CD User Manual Quick Start Guide Battery USB cable Wireless Link dongle Wireless Link dongle 3D 180º USB extensionSpecications*  According to free space test. The operating distance may be shorter   or interfered if there are walls, barriers, or interferences in the home    layout or operating environment.
xiv
3-13AiGuru S2 Wireless Skype Phone3.4  WiFi MusicYour AiGuru S2 phone can function as a Windows Media Player or iTunes remote controller, allowing you to play audio les while you are away from your computer, within the operating range of the WLAN module.2.  The handset screen will display the song list you select in your AiGuru S2 PC utility. Press the left soft key to start enjoying the music.3.4.1  Play modeYou are able to switch the play mode to Repeat and Random. 1.  From the idle screen, press the left soft key to display the main menu and select WiFi Music or press   key to enter WiFi Music directly. 1.  From the playback screen, press the left soft key (Mode).2.  From the Mode menu, highlight Play Mode and press the left soft key (Select) to conrm.
3-14 Chapter 3: Getting to know the phone menu and using the Skype™ features3.4.2  Sound modeThe WiFi Music function of AiGuru S2 provides different sound modes for the music playing. You can change the mode to suit the music genre or your mood.1.  From the playback screen, press the left soft key (Mode).3.  From the Play Mode menu, select Repeat to repeat the whole playlist or Random to shufe the play order. You can activate these two mode together.4.  After the repeat or the random mode is selected, the repeat icon   or the random icon   or both of them will appear on the playback screen.2.  From the Mode menu, highlight Sound Mode and press the left soft key (Select) to conrm.3.  From the Sound Mode menu, highlight a mode and press the left soft key (Select) to conrm.4.  After the selection, the sound mode will appear on the playback screen.The WiFi Music functions only in the WiFi mode.
3-15AiGuru S2 Wireless Skype Phone3.5  System info.The System Info. menu offers the information such as WiFi status, Mac address, and rmware version.2.  From the System Info. screen, select WiFi Status and press the left soft key to Enter.3.  The WiFi Status screen opens.3.5.1  WiFi Status1.  From the idle screen, press the left soft key to display the main menu and select System Info..
3-16 Chapter 3: Getting to know the phone menu and using the Skype™ features3.5.2  Mac Address1.  From the System Info. screen, select Mac Address and press the left soft key to Enter.2.  The Mac Address screen opens.Both WiFi Status and Mac Address will not appear on the System Info. list when in the USB mode.3.5.3  Firmware Version1.  From the System Info. screen, select Firmware Version and press the left soft key to Enter.2.  The Firmware Version screen opens.
3-17AiGuru S2 Wireless Skype Phone3.6  SettingsIn the Settings menu, you can congure settings of AiGuru S2 wireless skype phone, including language, display, keypad lock, or you can restore to the default setting.2.  From the Settings screen, select Language and press the left soft key to Enter.3.  The Language screen opens, and you can highlight the language you want to use. Press the left soft key (Select) to conrm.3.6.1  Language1.  From the idle screen, press the left soft key to display the main menu and select Settings.
3-18 Chapter 3: Getting to know the phone menu and using the Skype™ features2.  Highlight Backlight Time and press the left soft key to Select.3.  From the Backlight Time menu, you can select a screen backlight time and press the left soft key to Select.3.6.2  DisplayBacklingt Time1.  From the idle screen, press the left soft key to display the main menu and select Settings. 2.  From the Settings screen, select Display and press the left soft key to Enter.Unless you set the backlight time to Always On, the handset display darkens when the backlight time is up and blackens after one-minute idle to minimize battery energy consumption. Press any key to light up the display.
3-19AiGuru S2 Wireless Skype PhoneThe display will not blacken under three conditions: (1) the handset is connected to the PC and charging, (2) during a call, and (3) the WiFi Music is functioning. Brightness1.  From the idle screen, press the left soft key to display the main menu and select Settings. 2.  From the Settings screen, select Display and press the left soft key to Enter.3.  Highlight Brightness and press the left soft key to Select.4.  Use the navigation keys to adjust the value. Scroll right to increase the brightness and left to decrease the brightness.The conguration value of brightness is between -2 to 2.
3-20 Chapter 3: Getting to know the phone menu and using the Skype™ features3.2.3  Keypad LockKeypad LockLocking the keypadTo lock the keypad automatically:1.  Press the  left  soft  key  to  display the Menu and select Settings .3.  Select  Auto to set the keypad auto-locked. The default setting is Manual.2.  Scroll  down  to  the  Keypad  Lock item, then press the left soft key to Enter.4.  Idle  for  20  seconds,  the  keypad locks itself.To lock the keypad manually:1.  Press the left soft key.2.  Hold the asterisk key to lock the key pad.
3-21AiGuru S2 Wireless Skype PhoneUnlocking the keypadTo lock the keypad:1.  Press the left soft key.3.  The  main  screen  then  appears, indicating that  the  keypad  is  ready to use.2.  Press the asterisk key to unlock the keypad.
3-22 Chapter 3: Getting to know the phone menu and using the Skype™ features3.6.4  Load DefaultTo load the default settings:1.  From  the  idle  screen,  press  the left soft key  to display the main  menu and select Settings. 2.  From  the  Settings  screen, select Load Default and press the left soft key to Enter.3.  A message appears, asking for conrmation.4.  Pr ess  the  left  soft  key  (Yes)  to conrm or the  right  soft key (No) to stop the default loading.5.  After the the loading completes, the screen shows Default set.
AppendixReference informationThis chapter describes PC-cillin rewall settings and provides safety notices, an FAQ section as well as ASUS’ contact information.
A-2 Appendix: Reference informationA.1  Setting PC-cillin™If you installed PC-cillin™ Internet Security software in your computer, make the following settings before installing AiGuru S2 Utility. 1.  Open Trend Micro PC-cillin Internet Security, click Network Security tab, then click Personal Firewall.2.  On Personal Firewall screen, click Add.
A-3AiGuru S2 Wireless Skype Phone3.  Key in ASUS in Prolenameeld, then click OK.4.  Select Exception List tab, and click Add.
A-4 Appendix: Reference information5.  Add AiGuruIn a. Description: AiGuruIn  b. Target: Select Speciedapplicationand point to the location where the application is saved.  c. Connection: Incoming  d. Action: Allow   e. Protocol: TCP/UDP d. Port(s): All ports f. IP Setting: All IP Addresses6.  Add AiGuruOut a. Description: AiGuruOut  b. Target: Select Speciedapplicationand point to the location where the application is saved.  c. Connection: Outgoing  d. Action: Allow   e. Protocol: TCP/UDP d. Port(s): All ports f. IP Setting: All IP Addresses
A-5AiGuru S2 Wireless Skype Phone7.  Back to the Personal Firewall screen, select ASUS in Choose prole eld, then click Apply.
A-6 Appendix: Reference informationA.2  NoticesFEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENTThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  –  Reorient or relocate the receiving antenna.  –  Increase the separation between the equipment and receiver.  –  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  –  Consult the dealer or an experienced radio/TV technician for help.CAUTION:Any changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:  (1)This device may not cause harmful interference and  (2)This device must accept any interference received, including interference that may cause undesired operation.
A-7AiGuru S2 Wireless Skype PhoneA.3  Safety statementsRegulatory Information/DisclaimersInstallation and use of this Wireless LAN device must be in strict accordance with the instructions included in the user documentation provided with the product. Any changes or modications (including the antennas) made to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment. The manufacturer is not responsible for any radio or television interference caused by unauthorized modication of this device, or the substitution of the connecting cables and equipment other than manufacturer specied. It is the responsibility of the user to correct any interference caused by such unauthorized modication, substitution or attachment. Manufacturer and its authorized resellers or distributors will assume no liability for any damage or violation of government regulations arising from failing to comply with these guidelines. Use on the supplied antenna. Unauthorized antenna,modification, or attachments could damage the transmitter and may violate FCC regulations.Safety InformationUse only with  supplied antenna. Unauthorized antenna, modification, or attachmentscould damage the transmitter and may violate FCC regulations. Any changes or modications not expressly approved in this manual could void your authorization to use this device.
A-8 Appendix: Reference informationFCC RF Radiation Exposure StatementThis equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.This equipment must not be co-located or operating in conjunction with any other antenna or transmitter.
A-9AiGuru S2 Wireless Skype PhoneRadio waves may affect electronic equipment or medical devices (e.g., pacemakers), which may cause malfunctions and possible injuries.If you use a pacemaker or other medical device, consult your physician or the manufacturer of the medical device before using the wireless networking feature. Industry Canada regulatory informationOperation is subject to the following two conditions: (1)  This device may not cause harmful interference and (2)  This device must accept any interference received, including interference that may cause undesired operation.Declaration of ConformityThis product complies with the Radio & Telecommunication Terminal Equipment Directive (1995/5/EC), the Electromagnetic Compatibility Directive (89/336/EEC), and Low Voltage Directive (73/23/EEC).Compliance with these directives implies conformity to the following European Standards:EN 55022, EN55024, EN 300 328, EN 301 489-1 & 17, EN 60950, EN 50360, EN 50361EU RF Exposure StatementThis equipment complies with EU RF radiation exposure limits of 2 W/kg.802.11b=0.478 W/kg, 802.11g=0.4585W/kg
A-10 Appendix: Reference informationWireless Operation Channel for Different DomainsNorth America   2.412-2.462 GHz   Ch01 through Ch11 Japan   2.412-2.462 GHz   Ch01 through Ch11 Europe   ETSI 2.412-2.462 GHz   Ch01 through Ch11France Restricted Wireless Frequency BandsSome areas of France have a restricted frequency band. The worst case maximum authorized power indoors are:•   10 mW for the entire 2.4 GHz band (2400 MHz–2483.5 MHz)•   100 mW for frequencies between 2446.5 MHz and 2483.5 MHzChannels 10 through 13 inclusively operate in the band  2446.6 MHz to 2483.5 MHz.There are few possibilities for outdoor use: On private property or on the private property of public persons, use is subject to a preliminary authorization procedure by the Ministry of Defense, with maximum authorized power of 100mW in the 2446.5–2483.5 MHz band. Use outdoors on public property is not permitted.In the departments listed below, for the entire 2.4 GHz band:•  Maximum authorized power indoors is 100 mW•  Maximum authorized power outdoors is 10 mWDepartments in which the use of the 2400–2483.5 MHz band is permitted with an EIRP of less than 100mW indoors and less than 10mW outdoors:01 Ain Orientales   02 Aisne   03 Allier   05 Hautes Alpes 08 Ardennes   09 Ariège   11 Aude   12 Aveyron 16 Charente   24 Dordogne   25 Doubs   26 Drôme 32 Gers   36 Indre   37 Indre et Loire  41 Loir et Cher 45 Loiret   50 Manche   55 Meuse   58 Nièvre 59 Nord   60 Oise   61 Orne   63 Puy du Dôme 64 Pyrénées Atlantique   66 Pyrénées   67 Bas Rhin   68 Haut Rhin 70 Haute Saône   71 Saône et Loire   75 Paris   82 Tarn et Garonne 84 Vaucluse   88 Vosges   89 Yonne   90 Territoire de Belfort 94 Val de Marne
A-11AiGuru S2 Wireless Skype PhoneThis requirement is likely to change over time, allowing you to use your wireless LAN card in more areas within France. Please check with ART for the latest information (www.art-telecom.fr) Your WLAN Card transmits less than 100 mW, but more than 10 mW.UL Safety NoticesRequired for UL 1459 covering telecommunications (telephone) equipment intended to be electrically connected to a telecommunication network that has an operating voltage to ground that does not exceed 200V peak, 300V peak-to-peak, and 105V rms, and installed or used in accordance with the National Electrical Code (NFPA 70).When using the device, basic safety precautions should always be followed to reduce the risk of re, electric shock, and injury to persons, including the following:•   Do not use the device near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool.•   Do not use the device during an electrical storm. There may be a remote risk of electric shock from lightning.•   Do not use the device in the vicinity of a gas leak. Required for UL 1642 covering primary (nonrechargeable) and secondary (rechargeable) lithium batteries for use as power sources in products. These batteries contain metallic lithium, or a lithium alloy, or a lithium ion, and may consist of a single electrochemical cell or two or more cells connected in series, parallel, or both, that convert chemical energy into electrical energy by an irreversible or reversible chemical reaction.•   Do not dispose the device battery pack in a re, as they may explode. Check with local codes for possible special disposal instructions to reduce the risk of injury to persons due to re or explosion.•   Do not use power adapters or batteries from other devices to reduce the risk of injury to persons due to re or explosion. Use only UL certied power adapters or batteries supplied by the manufacturer or authorized retailers.
A-12 Appendix: Reference informationPower Safety RequirementProducts with electrical current ratings up to 6 A and weighing more than 3 Kg must use approved power cords greater than or equal to: H05VV-F, 3G, 0.75 mm2 or H05VV-F, 2G, 0.75 mm2.Nordic Cautions
A-13AiGuru S2 Wireless Skype PhoneProper DisposalThe symbol of the crossed out bin indicates that the product (electrical and electronic equipment) should not be placed in municipal waste. Check local regulations for disposal of electronic products.
A-14 Appendix: Reference informationSafety WarningsRead the following safety warnings carefully before using your cell phone. •  This equipment is intended for use with power supplied from supplied battery charger(s) and/or power supply unit(s). Other usage will invalidate any certication given to this apparatus and may be dangerous.•  Switch off your phone when in an aircraft. The use of wireless phones in an aircraft may be dangerous to the operation of the aircraft, disrupt cellular networks, and may be illegal. Failure to observe this instruction may lead to suspension or denial of phone services to the offender, legal action or both.•  Do not use the phone or phone equipment when at a refueling point.•  Observe restrictions on the use of radio equipment in fuel depots, chemical plants, or where blasting operations are in progress.•  The use of the Alert device to operate a vehicle’s lights or horn on public roads is not permitted.You MUST exercise proper control of your vehicle at all times. Observe the following safety precautions when driving: •  Do not use a hand-held telephone or microphone while you are driving. •  When driving, nd a safe place to stop the vehicle before using the phone. •  Do not speak into a hands-free microphone if it will distract you from driving.•  You MUST NOT stop on the hard shoulder of a motorway to answer or make a call, except in an emergency.•  The radio equipment should be connected to the antenna via a non-radiating cable (e.g. coaxial cable). The antenna must be mounted in a position such that no part of the human body will normally rest close to any part of the antenna unless there is an intervening metallic screen, such as a metallic roof.
A-15AiGuru S2 Wireless Skype Phone NOTES:  •  In some areas where electric current is unstable, it is recommended that you plug the charger to an AVR (AC Voltage Regulator) instead of direct connection to a power outlet. Unstable power current may damage the charger and / or the device.•  You can connect the USB charger or USB data cable to the device in only one orientation. Incorrect insertion of the cable connector may cause short circuiting and may damage the device.
A-16 Appendix: Reference informationA.4  TroubleshootingWhen the phone and wireless settings are congured properly, the main display should show the following. This means that the phone is ready to use.Following are some situations you might encounter, indicating that there is a problem with the connection, and the possible actions you can take.Message displayed Problem description Action to takeWiFi Disconnected 1. The phone was not congured properly.2. Communication between the phone and the Wireless Link USB dongle is not established.Recongure the phone settings. See section “2.2.3 Handset Mode Switch and WiFi Congure” No Service 1. The communication between the phone and the Wireless Link USB dongle is established.2. The AiGuru S2 Utility has not been launched.See section “2.2 Optimizing the AiGuru S2 Utility settings” to launch the AiGuru S2 Utility.Skype™ Logged Off 1. Skype™ is not launched on your PC or logged in with personal account.2. There is no Internet access.Make sure that you have Internet access and that you have launched and logged into Skype™ Different from Ofine (Presence), the message Skype Logged Off denotes some possible problems of the Skype utility or the lack of internet access.
A-17AiGuru S2 Wireless Skype PhoneA.5  FAQThis section provides solutions to problems that may occur or questions commonly encountered during the installation and operation of the ASUS AiGuru S2 Wireless Skype Phone. Read the description below to solve your problems. If you cannot nd an answer here, check the ASUS contact information at the end of the user manual.Q1.   Why is there no dial tone when I press the Talk & Recall button?A1.  Either the Wireless Link USB dongle is not properly connected to the PC, the handset is too far from the Wireless Link USB dongle, or the battery is low (low battery icon is displayed).  • Check the connections.  • Move closer to the Wireless Link USB Dongle unit.  • Charge the battery. • If there is something wrong with Skype Program itself, please restart Skype.Q2.   Why does the screen show “WiFi Disconnect”?A2.  When the phone is out of the Wireless Link USB dongle’s operating range, the phone will keep accessing its signal source for 30 seconds. If detecting the signal fails, the screen shows the message “WiFi Disconnect” and the goes into sleep mode.  To regain wireless access, move the handset closer to the Wireless Link USB dongle and press any key on the handset for access retrieval.Q3.   Why is the battery icon “empty” although the handset has been charged for 24 hours?A3.  The handset might not be connected to the PC correctly. It is also possible that the handset’s battery is defective.  • Contact your dealer to purchase a new rechargeable battery.  • Make sure the battery icon is scrolling. If it is not, the battery is not charging.Q4.   Why is there no symbol on the display?A4.  This could mean that the battery is not charged or the Phone Kit is not properly connected.  • Verify that you have set up the Phone Kit properly.
A-18 Appendix: Reference information  • Charge the battery.Q5.  Why is the audio quality poor sometimes ? (crackles/echoes, etc.)A5.  There may be interference from nearby electrical appliances or the Wireless Link USB dongle is installed in a room with thick walls. If this is the case, move the PC to a different location. If the handset is too far from the Wireless Link USB dongle, move the handset closer.Q6.   Why can I not hear the other party clearly? Why is the speaker too loud/too quiet?A6.  The speaker volume on your PC or on the handset may be set too low. Adjust the volume to get better effect.Q7.   Why does the phone not ring when a call comes in?A7.  The ringer may be too small to hear. Adjust the volume of the ringer.Q8.   Why does the contact list/user status return a “NO SERVICE” message?A8.  This may be caused by not starting or logging into Skype™ properly. Verify that you are logged into Skype™ and the program is running properly.  Another cause may be that the AiGuru S2 Utility or Wireless Link USB dongle driver has not been launched on the PC, or the dongle plug may be disconnected. Verify that the AiGuru S2 Utility and Wireless Link USB dongle driver are functioning properly and that the dongle plug is properly connected.   Also, verify that the PC is not in standby/hibernate mode.  Q9.   Why can I not SkypeOut?A9.  If 00, + or 011 is omitted, enter 00, + (double press the asterisk key) or 011 before the number you are dialing. If your Skype™ account has too little or no credit left, purchase more credits on the Skype™ website. The handset may have lost its link. Verify that the handset has a link with the Wireless Link USB dongle.Q10.   Why am I not getting any tone response from Skype™?A10.  Either the Skype™ or the PC application have not started, the USB dongle is not plugged in, your PC is in standby/hibernate mode, or your other party is ofine.  • Make sure both Skype™ and the PC application is/are started on the PC and    running properly.
A-19AiGuru S2 Wireless Skype Phone  • Make sure the phone is set up correctly.  • Wait for the remote party to be online.Q11.   Why can I not hear any sound from the phone while the Wireless Link USB dongle is plugged in to the PC and the wireless setup is properly established?A11.  When the Wireless Link USB dongle is plugged in to the USB port of your PC, the Phone Voice stream will be routed to the handset. If you cannot hear any voice from the phone, check the setting of Sound Devices in SkypeTM.  Go to Skype™ > Tools > Options > Sound Devices and make the following settings:    Audio In: Virtual Cable 1    Audio Out: Virtual Cable 2    Ringing: Virtual Cable 2Q12.   Why can I not hear any sound from the PC speakers for normal PC operation while the Wireless Link USB Dongle is plugged in to the PC?A12.  The PC default audio setting might be in the wrong order. You can change back the setting of your PC audio by going to Control panel > Sound > Speech and Audio Device > Sound and Audio Device > Audio. Check Only use default devices. Q13.   What will I do if the phone is out of operating range? How come no signal is detected?A13.    When the phone is out of the Wireless Link USB dongle’s operating range, the phone will keep accessing its signal source for 30 seconds. If detecting the signal fails, the screen shows the message “WiFi Disconnect” and then goes into sleep mode.  To regain the connection, move the handset closer to the Wireless Link USB dongle and press any key on the handset for access retrieval.
A-20 Appendix: Reference informationQ14.    Why can I not hear any music when using WiFi Music on the phone?A14.     Please check whether the setting of Windows Media Player is muted or not. If yes, disable the setting. Or refer to Q&A11. for answers.Q15.    What will I do if I would like to use other Skype devices, or headset rather than this phone? What if I cannot hear any sound from other Skype devices or headset rather than this phone?A15.    If you cannot hear any voice from other Skype devices or headset, you may            1. Completely turn off the software utility of this phone, AiGuru S2 Utility, and restart Skype™            2. Check the setting of Sound Devices in Skype™. Go to Skype™ > Tools> Options >Sound Devices and make the following settings: Audio In: Desired Skype Device or windows default device Audio Out: Desired Skype Device or Windows default device Ringing: Desired skype Device or Windows default device
A-21AiGuru S2 Wireless Skype PhoneASUS contact informationASUSTeK COMPUTER INC. (Taiwan)Technical SupportHotline   0800-093-456 (Toll-free call from Taiwan only)Fax     +886-2-2895-9254E-mail  http://vip.asus.com/eservice/techserv.aspxWeb site  http://taiwan.asus.com.twASUSTeKCOMPUTERINC.(Asia-Pacic)Technical SupportHotline   +886-2-2894-3447Fax     +886-2-2890-7698E-mail  http://vip.asus.com/eservice/techserv.aspxWeb site  http://www.asus.comASUS COMPUTER INTERNATIONAL (America)Technical Support  Motherboard and General Product SupportE-mail  http://vip.asus.com/eservice/techserv.aspxTelephone    +1-502-995-0883 (select option 3)Fax    +1-502-933-8713ASUS COMPUTER GmbH (Germany and Austria)Technical SupportHotline (MB/Others)   +49-2102-9599-0Notebook  +49-2102-959910Fax    +49-2102-959911Email  http://www.asus.de/support/support.htmWebsite  http://www.asus.de
A-22 Appendix: Reference informationASUS contact informationASUS Holland B.V. (Netherlands)Notebook Hotline     +31-(0)591-668190Fax      +31-(0)591-666853Email    http://vip.asus.com/eservice/techserv.aspx       (Notebook, MB, VGA only)ASUS COMPUTER (China)Telephone     +86-10-82667575Email    http://vip.asus.com.cn/eservice/techserv.aspx

Navigation menu